diff --git a/readme.md b/readme.md
index 6a505f72..ac36027b 100755
--- a/readme.md
+++ b/readme.md
@@ -1,99 +1,67 @@
[](https://discord.gg/3E8ca2dkcC)
-
-
# ESP-Miner
| Supported Targets | ESP32-S3 (BitAxe v2+) |
| ----------------- | --------------------- |
+## Requires Python3.4 or later and pip
-## Requires ESP-IDF v5.1
+Install bitaxetool from pip. pip is included with Python 3.4 but if you need to install it check
-You can chose between 2 methods of installations:
-
-### Manual Installation
-
-Follow the official [instructions](https://docs.espressif.com/projects/esp-idf/en/release-v5.1/esp32s3/get-started/index.html#manual-installation).
-
-### ESP-IDF Visual Studio Code Extension
-
-Install the "Espressif IDF" extension, it will automate the IDF installation for you.
+```
+pip install --upgrade bitaxetool
+```
## Hardware Required
This firmware is designed to run on a BitAxe v2+
-## Configure the project
+If you do have a Bitaxe with no USB connectivity make sure to establish a serial connection with either a JTAG ESP-Prog device or a USB-to-UART bridge
-Set the target
+## Preconfiguration
+
+Starting with v2.0.0, the ESP-Miner firmware requires some basic manufacturing data to be flashed in the NVS partition.
+
+1. Download the esp-miner-factory-v2.0.3.bin file from the release tab.
+ Click [here](https://github.com/skot/ESP-Miner/releases) for the release tab
+
+2. Copy `config.cvs.example` to `config.cvs` and modify `asicfrequency`, `asicvoltage`, `asicmodel`, `devicemodel`, and `boardversion`
+
+The following are recommendations but it is necessary that you do have all values in your `config.cvs`file to flash properly.
+
+- recommended values for the Bitaxe 1366 (ultra)
+
+ ```
+ key,type,encoding,value
+ main,namespace,,
+ asicfrequency,data,u16,485
+ asicvoltage,data,u16,1320
+ asicmodel,data,string,BM1366
+ devicemodel,data,string,ultra
+ boardversion,data,string,0.11
+ ```
+
+- recomended values for the Bitaxe 1397 (MAX)
+
+ ```
+ key,type,encoding,value
+ main,namespace,,
+ asicfrequency,data,u16,475
+ asicvoltage,data,u16,1400
+ asicmodel,data,string,BM1397
+ devicemodel,data,string,max
+ boardversion,data,string,2.2
+ ```
+
+## Flash
+
+The bitaxetool includes all necessary library for flashing the binary file to the Bitaxe Hardware.
+
+The bitaxetool requires a config.cvs preloaded file and the appropiate firmware.bin file in it's executed directory.
+
+3. Flash with the bitaxetool
```
-idf.py set-target esp32s3
-```
-
-Use menuconfig to set the stratum server address/port and WiFi SSID/Password
-
-```
-idf.py menuconfig
-```
-
-Set following parameters under Stratum Configuration Options, these will define the stratum server you connect to:
-
-* Set `Stratum Address` to the stratum pool domain name. example "public-pool.io"
-
-* Set `Stratum Port` to the stratum pool port. example "21496"
-
-* Set `Stratum username` to the stratum pool username. example ".bitaxe"
-
-* Set `Stratum password` to the stratum pool password. example "x"
-
-Set following parameters under Example Connection Configuration Options:
-
-* Set `WiFi SSID` to your target wifi network SSID.
-
-* Set `Wifi Password` to the password for your target SSID.
-
-For more information about the example_connect() method used here, check out .
-
-## Build website
-
-To build the website for viewing and OTA updates open the Angular project found in
-```
-ESP-Miner\main\http_server\axe-os
-```
-
-Then install dependencies and build.
-
-```
-npm i
-npm run build
-```
-
-
- When the esp-idf project is built it will bundle the website in www.bin
-
-
-## Build and Flash
-
-Build the project and flash it to the board, then run monitor tool to view serial output:
-
-```
-idf.py -p PORT flash monitor
-```
-
-(To exit the serial monitor, type ``Ctrl-]``.)
-
-See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
-
-## Run Unit tests
-
-The unit tests for the project use the unity test framework and currently require actual esp32 hardware to run.
-
-They are located at
-
-```
-cd ./test/
-idf.py set-target esp32s3
-idf.py -p PORT flash monitor
+bitaxetool --config ./config.cvs --firmware ./esp-miner-factory-v2.0.3.bin
```