availability list (optional)
A list of MQTT topics subscribed to receive availability (online/offline) updates. Must not be used together with availability_topic.

payload_available string (optional, default: online)
The payload that represents the available state.

payload_not_available string (optional, default: offline)
The payload that represents the unavailable state.

topic string REQUIRED
An MQTT topic subscribed to receive availability (online/offline) updates.

value_template template (optional)
Defines a template to extract device’s availability from the topic. To determine the devices’s availability result of this template will be compared to payload_available and payload_not_available.

availability_mode string (optional, default: latest)
When availability is configured, this controls the conditions needed to set the entity to available. Valid entries are all, any, and latest. If set to all, payload_available must be received on all configured availability topics before the entity is marked as online. If set to any, payload_available must be received on at least one configured availability topic before the entity is marked as online. If set to latest, the last payload_available or payload_not_available received on any configured availability topic controls the availability.

availability_template template (optional)
Defines a template to extract device’s availability from the availability_topic. To determine the devices’s availability result of this template will be compared to payload_available and payload_not_available.

availability_topic string (optional)
The MQTT topic subscribed to receive availability (online/offline) updates. Must not be used together with availability.

device map (optional)
Information about the device this camera is a part of to tie it into the device registry. Only works through MQTT discovery and when unique_id is set. At least one of identifiers or connections must be present to identify the device.

configuration_url string (optional)
A link to the webpage that can manage the configuration of this device. Can be either an HTTP or HTTPS link.

connections list (optional)
A list of connections of the device to the outside world as a list of tuples [connection_type, connection_identifier]. For example the MAC address of a network interface: "connections": ["mac", "02:5b:26:a8:dc:12"].

hw_version string (optional)
The hardware version of the device.

identifiers list | string (optional)
A list of IDs that uniquely identify the device. For example a serial number.

manufacturer string (optional)
The manufacturer of the device.

model string (optional)
The model of the device.

name string (optional)
The name of the device.

suggested_area string (optional)
Suggest an area if the device isn’t in one yet.

sw_version string (optional)
The firmware version of the device.

via_device string (optional)
Identifier of a device that routes messages between this device and Home Assistant. Examples of such devices are hubs, or parent devices of a sub-device. This is used to show device topology in Home Assistant.

enabled_by_default boolean (optional, default: true)
Flag which defines if the entity should be enabled when first added.

encoding string (optional, default: utf-8)
The encoding of the payloads received. Set to "" to disable decoding of incoming payload. Use image_encoding to enable Base64 decoding on topic.

entity_category string (optional, default: None)
The category of the entity.

icon icon (optional)
Icon for the entity.

image_encoding string (optional, default: None)
The encoding of the image payloads received. Set to "b64" to enable base64 decoding of image payload. If not set, the image payload must be raw binary data.

json_attributes_template template (optional)
Defines a template to extract the JSON dictionary from messages received on the json_attributes_topic.

json_attributes_topic string (optional)
The MQTT topic subscribed to receive a JSON dictionary payload and then set as sensor attributes. Implies force_update of the current sensor state when a message is received on this topic.

name string (optional)
The name of the camera.

object_id string (optional)
Used instead of name for automatic generation of entity_id

topic string REQUIRED
The MQTT topic to subscribe to.

unique_id string (optional)
An ID that uniquely identifies this camera. If two cameras have the same unique ID Home Assistant will raise an exception.