From ba93cde07a794e91084b64a981b0db4e73bd253e Mon Sep 17 00:00:00 2001 From: Elle Mouton Date: Thu, 3 Aug 2023 17:12:49 +0200 Subject: [PATCH] sample-lnd.conf: remove litecoin conf options --- sample-lnd.conf | 207 ------------------------------------------------ 1 file changed, 207 deletions(-) diff --git a/sample-lnd.conf b/sample-lnd.conf index bf592f834..4086b8efe 100644 --- a/sample-lnd.conf +++ b/sample-lnd.conf @@ -824,213 +824,6 @@ ; Neutrino is used. ; neutrino.validatechannels=false - -[Litecoin] - -; If the Litecoin chain should be active. Atm, only a single chain can be -; active. -; litecoin.active=false - -; The directory to store the chain's data within. -; Default: -; litecoin.chaindir=~/.lnd/data/chain/litecoin - -; Use Litecoin's main network. -; litecoin.mainnet=false - -; Use Litecoin's test network. -; litecoin.testnet=false -; -; Use Litecoin's simulation test network -; litecoin.simnet=false - -; Use Litecoin's regression test network -; litecoin.regtest=false - -; Litecoin does not support the signet test network. The options -; litecoin.signet, litecoin.signetchallenge and litecoin.signetseednode are -; only defined because the data structure is shared with bitcoind. - -; Use the ltcd back-end. -; Default: -; litecoin.node=ltcd -; Example -; Use the litecoind back-end. -; litecoin.node=litecoind - -; The default number of confirmations a channel must have before it's considered -; open. We'll require any incoming channel requests to wait this many -; confirmations before we consider the channel active. -; Default: -; litecoin.defaultchanconfs= -; Example: -; litecoin.defaultchanconfs=3 - -; The default number of blocks we will require our channel counterparty to wait -; before accessing its funds in case of unilateral close. If this is not set, we -; will scale the value according to the channel size. -; Default: -; litecoin.defaultremotedelay= -; Example: -; litecoin.defaultremotedelay=144 - -; The maximum number of blocks we will limit the wait that our own funds are -; encumbered by in the case when our node unilaterally closes. If a remote peer -; proposes a channel with a delay above this amount, lnd will reject the -; channel. -; litecoin.maxlocaldelay=2016 - -; The smallest HTLC we are willing to accept on our channels, in millisatoshi. -; litecoin.minhtlc=1 - -; The smallest HTLC we are willing to send out on our channels, in millisatoshi. -; litecoin.minhtlcout=1000 - -; The base fee in millisatoshi we will charge for forwarding payments on our -; channels. -; litecoin.basefee=1000 - -; The fee rate used when forwarding payments on our channels. The total fee -; charged is basefee + (amount * feerate / 1000000), where amount is the -; forwarded amount. -; litecoin.feerate=1 - -; The CLTV delta we will subtract from a forwarded HTLC's timelock value. -; litecoin.timelockdelta=576 - -; The seed DNS server(s) to use for initial peer discovery. Must be specified as -; a '[,]' tuple where the SOA address is needed -; for DNS resolution through Tor but is optional for clearnet users. Multiple -; tuples can be specified, will overwrite the default seed servers. -; The default seed servers are: -; Default: -; mainnet: -; litecoin.dnsseed=ltc.nodes.lightning.directory,soa.nodes.lightning.directory -; -; Example for custom DNS servers: -; litecoin.dnsseed=seed1.test-ltc.lightning -; litecoin.dnsseed=seed2.test-ltc.lightning,soa.seed2.test-ltc.lightning - - -[Ltcd] - -; The base directory that contains the node's data, logs, configuration file, -; etc. -; ltcd.dir=~/.ltcd - -; The host that your local ltcd daemon is listening on. By default, this -; setting is assumed to be localhost with the default port for the current -; network. -; ltcd.rpchost=localhost - -; Username for RPC connections to ltcd. By default, lnd will attempt to -; automatically obtain the credentials, so this likely won't need to be set -; (other than for simnet mode). -; Default: -; ltcd.rpcuser= -; Example: -; ltcd.rpcuser=kek - -; Password for RPC connections to ltcd. By default, lnd will attempt to -; automatically obtain the credentials, so this likely won't need to be set -; (other than for simnet mode). -; Default: -; ltcd.rpcpass= -; Example: -; ltcd.rpcpass=kek - -; File containing the daemon's certificate file. This only needs to be set if -; the node isn't on the same host as lnd. -; ltcd.rpccert=~/.ltcd/rpc.cert - -; The raw bytes of the daemon's PEM-encoded certificate chain which will be used -; to authenticate the RPC connection. This only needs to be set if the ltcd -; node is on a remote host. -; ltcd.rawrpccert= - - -[Litecoind] - -; The base directory that contains the node's data, logs, configuration file, -; etc. -; litecoind.dir=~/.litecoin - -; Configuration filepath. -; Default: -; litecoind.config= -; Example: -; litecoind.config=~/.litecoin/litecoin.conf - -; Authentication cookie file for RPC connections. -; Default: -; litecoind.rpccookie= -; Example: -; litecoind.rpccookie=~/.litecoin/.cookie - -; The host that your local litecoind daemon is listening on. By default, this -; setting is assumed to be localhost with the default port for the current -; network. -; litecoind.rpchost=localhost - -; Username for RPC connections to litecoind. By default, lnd will attempt to -; automatically obtain the credentials, so this likely won't need to be set -; (other than for a remote litecoind instance). -; Default: -; litecoind.rpcuser= -; Example: -; litecoind.rpcuser=kek - -; Password for RPC connections to litecoind. By default, lnd will attempt to -; automatically obtain the credentials, so this likely won't need to be set -; (other than for a remote litecoind instance). -; Default: -; litecoind.rpcpass= -; Example: -; litecoind.rpcpass=kek - -; ZMQ socket which sends rawblock and rawtx notifications from litecoind. By -; default, lnd will attempt to automatically obtain this information, so this -; likely won't need to be set (other than for a remote litecoind instance). -; Default: -; litecoind.zmqpubrawblock= -; Example: -; litecoind.zmqpubrawblock=tcp://127.0.0.1:28332 - -; Default: -; litecoind.zmqpubrawtx= -; Example: -; litecoind.zmqpubrawtx=tcp://127.0.0.1:28333 - -; Default: -; litecoind.zmqreaddeadline= -; Example: -; litecoind.zmqreaddeadline=10s - -; Use litecoind's rpc interface to get block and transaction notifications -; instead of using the zmq interface. Only the rpcpolling option needs to -; be set in order to enable this, the rest of the options can be used to -; change the default values used for this configuration. -; litecoind.rpcpolling=false - -; Default: -; litecoind.blockpollinginterval=0s -; Example: -; litecoind.blockpollinginterval=1m - -; Default: -; litecoind.txpollinginterval=0s -; Example: -; litecoind.txpollinginterval=30s - -; Fee estimate mode for litecoind. It must be either "ECONOMICAL" or "CONSERVATIVE". -; If unset, the default value is "CONSERVATIVE". -; litecoind.estimatemode=CONSERVATIVE - -; The maximum number of peers lnd will choose from the backend node to retrieve -; pruned blocks from. This only applies to pruned nodes. -; litecoind.pruned-node-max-peers=4 - - [autopilot] ; If the autopilot agent should be active or not. The autopilot agent will