diff --git a/DietPi/build_sdcard_withfail2ban b/DietPi/build_sdcard_withfail2ban new file mode 100644 index 000000000..5eace4b0a --- /dev/null +++ b/DietPi/build_sdcard_withfail2ban @@ -0,0 +1,863 @@ + ──────────────────────────────────────────────── + DietPi | Mon 28/01/19 - 16:08 + ──────────────────────────────────────────────── + v6.19.7 | Odroid XU3/XU4/HC1/HC2 (armv7l) + ──────────────────────────────────────────────── + eth0 | 192.168.1.175 + ──────────────────────────────────────────────── + DietPi Team : Daniel Knight (founder), MichaIng, K-Plan + Image : DietPi Core Team (pre-image: Meveric) + Web : https://DietPi.com | https://twitter.com/dietpi_ + Patreon Legends : PINE64 community + Donate : https://DietPi.com/#donate + DietPi Hosting : Powered by https://MyVirtualServer.com + + dietpi-launcher = All the DietPi programs in one place. + dietpi-config = Feature rich configuration tool for your device. + dietpi-software = Select optimized software for installation. + htop = Resource monitor. + cpu = Shows CPU information and stats. + +root@DietPi:~# sudo apt instal python-pip +E: Invalid operation instal +root@DietPi:~# sudo apt install python-pip +Reading package lists... Done +Building dependency tree +Reading state information... Done +The following additional packages will be installed: + libpython-stdlib libpython2.7-minimal libpython2.7-stdlib python python-minimal python-pip-whl python2.7 python2.7-minimal +Suggested packages: + python-doc python-tk python2.7-doc binutils binfmt-support +Recommended packages: + build-essential python-all-dev python-setuptools python-wheel +The following NEW packages will be installed: + libpython-stdlib libpython2.7-minimal libpython2.7-stdlib python python-minimal python-pip python-pip-whl python2.7 python2.7-minimal +0 upgraded, 9 newly installed, 0 to remove and 0 not upgraded. +Need to get 5,470 kB of archives. +After this operation, 17.2 MB of additional disk space will be used. +Do you want to continue? [Y/n] n +Abort. +root@DietPi:~# wget https://raw.githubusercontent.com/rootzoll/raspiblitz/master/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh +--2019-01-28 16:12:34-- https://raw.githubusercontent.com/rootzoll/raspiblitz/master/build.sdcard/raspbianStretchDesktop.sh +Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.60.133 +Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.60.133|:443... connected. +HTTP request sent, awaiting response... 200 OK +Length: 20808 (20K) [text/plain] +Saving to: ‘raspbianStretchDesktop.sh’ + +raspbianStretchDesktop.sh 100%[=================================================================================================================>] 20.32K --.-KB/s in 0.06s + +2019-01-28 16:12:34 (345 KB/s) - ‘raspbianStretchDesktop.sh’ saved [20808/20808] + + +***************************************** +* RASPIBLITZ SD CARD IMAGE SETUP v0.99 * +***************************************** + +*** CHECK INPUT PARAMETERS *** +will use code from branch --> 'master' +*** CHECK INPUT PARAMETERS *** +will use code from user --> 'rootzoll' + +*** CHECK BASE IMAGE *** +Check if Linux ARM based ... +OK running on Linux ARM architecture. +Detect Base Image ... +OK running dietpi + +*** FIXING LOCALES FOR BUILD *** +Generating locales (this might take a while)... + en_GB.UTF-8... done + en_US.ISO-8859-1... done + en_US.UTF-8... done +Generation complete. + +*** UPDATE DEBIAN *** +Hit:1 http://fuzon.co.uk/meveric all InRelease +Hit:3 http://fuzon.co.uk/meveric stretch InRelease +Hit:2 https://oph.mdrjr.net/meveric all InRelease +Ign:4 https://cdn-aws.deb.debian.org/debian stretch InRelease +Hit:5 https://cdn-aws.deb.debian.org/debian stretch-updates InRelease +Hit:6 https://cdn-aws.deb.debian.org/debian-security stretch/updates InRelease +Hit:7 https://cdn-aws.deb.debian.org/debian stretch-backports InRelease +Hit:8 https://cdn-aws.deb.debian.org/debian stretch Release +Reading package lists... Done +Reading package lists... Done +Building dependency tree +Reading state information... Done +Calculating upgrade... Done +0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. + +*** PREPARE DietPi *** +renaming dietpi user ti pi +install pip +Hit:1 http://fuzon.co.uk/meveric all InRelease +Hit:3 http://fuzon.co.uk/meveric stretch InRelease +Hit:2 https://oph.mdrjr.net/meveric all InRelease +Ign:4 https://cdn-aws.deb.debian.org/debian stretch InRelease +Hit:5 https://cdn-aws.deb.debian.org/debian stretch-updates InRelease +Hit:6 https://cdn-aws.deb.debian.org/debian-security stretch/updates InRelease +Hit:7 https://cdn-aws.deb.debian.org/debian stretch-backports InRelease +Hit:8 https://cdn-aws.deb.debian.org/debian stretch Release +Reading package lists... Done +Reading package lists... Done +Building dependency tree +Reading state information... Done +The following packages will be REMOVED: + fail2ban +0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. +After this operation, 1,321 kB disk space will be freed. +(Reading database ... 15499 files and directories currently installed.) +Removing fail2ban (0.9.6-2) ... +Reading package lists... Done +Building dependency tree +Reading state information... Done +The following additional packages will be installed: + binutils cpp cpp-6 dpkg-dev g++ g++-6 gcc gcc-6 libasan3 libatomic1 libc-dev-bin libc6-dev libcc1-0 libdpkg-perl libgcc-6-dev libgdbm3 libgomp1 libisl15 libmpc3 libmpfr4 libperl5.24 libstdc++-6-dev + libubsan0 linux-libc-dev make patch perl perl-modules-5.24 xz-utils +Suggested packages: + binutils-doc cpp-doc gcc-6-locales debian-keyring gcc-6-doc libstdc++6-6-dbg gcc-multilib manpages-dev autoconf automake libtool flex bison gdb gcc-doc libgcc1-dbg libgomp1-dbg libitm1-dbg + libatomic1-dbg libasan3-dbg liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg libmpx2-dbg libquadmath0-dbg glibc-doc libstdc++-6-doc make-doc ed diffutils-doc perl-doc libterm-readline-gnu-perl + | libterm-readline-perl-perl +Recommended packages: + fakeroot libalgorithm-merge-perl manpages manpages-dev libfile-fcntllock-perl netbase rename +The following NEW packages will be installed: + binutils build-essential cpp cpp-6 dpkg-dev g++ g++-6 gcc gcc-6 libasan3 libatomic1 libc-dev-bin libc6-dev libcc1-0 libdpkg-perl libgcc-6-dev libgdbm3 libgomp1 libisl15 libmpc3 libmpfr4 libperl5.24 + libstdc++-6-dev libubsan0 linux-libc-dev make patch perl perl-modules-5.24 xz-utils +0 upgraded, 30 newly installed, 0 to remove and 0 not upgraded. +Need to get 36.8 MB of archives. +After this operation, 138 MB of additional disk space will be used. +Get:1 https://cdn-aws.deb.debian.org/debian-security stretch/updates/main armhf perl-modules-5.24 all 5.24.1-3+deb9u5 [2,722 kB] +Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libgdbm3 armhf 1.8.3-14 [28.5 kB] +Get:3 https://cdn-aws.deb.debian.org/debian-security stretch/updates/main armhf libperl5.24 armhf 5.24.1-3+deb9u5 [2,850 kB] +Get:4 https://cdn-aws.deb.debian.org/debian-security stretch/updates/main armhf perl armhf 5.24.1-3+deb9u5 [219 kB] +Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf xz-utils armhf 5.2.2-1.2+b1 [263 kB] +Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf binutils armhf 2.28-5 [3,900 kB] +Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf libc-dev-bin armhf 2.24-11+deb9u3 [253 kB] +Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf linux-libc-dev armhf 4.9.130-2 [1,350 kB] +Get:9 https://cdn-aws.deb.debian.org/debian stretch/main armhf libc6-dev armhf 2.24-11+deb9u3 [1,995 kB] +Get:10 https://cdn-aws.deb.debian.org/debian stretch/main armhf libisl15 armhf 0.18-1 [441 kB] +Get:11 https://cdn-aws.deb.debian.org/debian stretch/main armhf libmpfr4 armhf 3.1.5-1 [536 kB] +Get:12 https://cdn-aws.deb.debian.org/debian stretch/main armhf libmpc3 armhf 1.0.3-1+b2 [32.6 kB] +Get:13 https://cdn-aws.deb.debian.org/debian stretch/main armhf cpp-6 armhf 6.3.0-18+deb9u1 [5,239 kB] +51% [13 cpp-6 5,145 kB/5,239 kB 98%] 556 kB/s 30Get:14 https://cdn-aws.deb.debian.org/debian stretch/main armhf cpp armhf 4:6.3.0-4 [18.7 kB] +Get:15 https://cdn-aws.deb.debian.org/debian stretch/main armhf libcc1-0 armhf 6.3.0-18+deb9u1 [25.2 kB] +Get:16 https://cdn-aws.deb.debian.org/debian stretch/main armhf libgomp1 armhf 6.3.0-18+deb9u1 [64.6 kB] +Get:17 https://cdn-aws.deb.debian.org/debian stretch/main armhf libatomic1 armhf 6.3.0-18+deb9u1 [6,010 B] +Get:18 https://cdn-aws.deb.debian.org/debian stretch/main armhf libasan3 armhf 6.3.0-18+deb9u1 [284 kB] +Get:19 https://cdn-aws.deb.debian.org/debian stretch/main armhf libubsan0 armhf 6.3.0-18+deb9u1 [92.9 kB] +Get:20 https://cdn-aws.deb.debian.org/debian stretch/main armhf libgcc-6-dev armhf 6.3.0-18+deb9u1 [531 kB] +Get:21 https://cdn-aws.deb.debian.org/debian stretch/main armhf gcc-6 armhf 6.3.0-18+deb9u1 [5,511 kB] +Get:22 https://cdn-aws.deb.debian.org/debian stretch/main armhf gcc armhf 4:6.3.0-4 [5,212 B] +Get:23 https://cdn-aws.deb.debian.org/debian stretch/main armhf libstdc++-6-dev armhf 6.3.0-18+deb9u1 [1,487 kB] +Get:24 https://cdn-aws.deb.debian.org/debian stretch/main armhf g++-6 armhf 6.3.0-18+deb9u1 [5,665 kB] +Get:25 https://cdn-aws.deb.debian.org/debian stretch/main armhf g++ armhf 4:6.3.0-4 [1,520 B] +Get:26 https://cdn-aws.deb.debian.org/debian stretch/main armhf make armhf 4.1-9.1 [290 kB] +Get:27 https://cdn-aws.deb.debian.org/debian stretch/main armhf libdpkg-perl all 1.18.25 [1,287 kB] +Get:28 https://cdn-aws.deb.debian.org/debian stretch/main armhf patch armhf 2.7.5-1+deb9u1 [106 kB] +Get:29 https://cdn-aws.deb.debian.org/debian stretch/main armhf dpkg-dev all 1.18.25 [1,595 kB] +Get:30 https://cdn-aws.deb.debian.org/debian stretch/main armhf build-essential armhf 12.3 [7,342 B] +Fetched 36.8 MB in 1min 47s (342 kB/s) +Selecting previously unselected package perl-modules-5.24. +(Reading database ... 15254 files and directories currently installed.) +Preparing to unpack .../00-perl-modules-5.24_5.24.1-3+deb9u5_all.deb ... +Unpacking perl-modules-5.24 (5.24.1-3+deb9u5) ... +Selecting previously unselected package libgdbm3:armhf. +Preparing to unpack .../01-libgdbm3_1.8.3-14_armhf.deb ... +Unpacking libgdbm3:armhf (1.8.3-14) ... +Selecting previously unselected package libperl5.24:armhf. +Preparing to unpack .../02-libperl5.24_5.24.1-3+deb9u5_armhf.deb ... +Unpacking libperl5.24:armhf (5.24.1-3+deb9u5) ... +Selecting previously unselected package perl. +Preparing to unpack .../03-perl_5.24.1-3+deb9u5_armhf.deb ... +Unpacking perl (5.24.1-3+deb9u5) ... +Selecting previously unselected package xz-utils. +Preparing to unpack .../04-xz-utils_5.2.2-1.2+b1_armhf.deb ... +Unpacking xz-utils (5.2.2-1.2+b1) ... +Selecting previously unselected package binutils. +Preparing to unpack .../05-binutils_2.28-5_armhf.deb ... +Unpacking binutils (2.28-5) ... +Selecting previously unselected package libc-dev-bin. +Preparing to unpack .../06-libc-dev-bin_2.24-11+deb9u3_armhf.deb ... +Unpacking libc-dev-bin (2.24-11+deb9u3) ... +Selecting previously unselected package linux-libc-dev:armhf. +Preparing to unpack .../07-linux-libc-dev_4.9.130-2_armhf.deb ... +Unpacking linux-libc-dev:armhf (4.9.130-2) ... +Selecting previously unselected package libc6-dev:armhf. +Preparing to unpack .../08-libc6-dev_2.24-11+deb9u3_armhf.deb ... +Unpacking libc6-dev:armhf (2.24-11+deb9u3) ... +Selecting previously unselected package libisl15:armhf. +Preparing to unpack .../09-libisl15_0.18-1_armhf.deb ... +Unpacking libisl15:armhf (0.18-1) ... +Selecting previously unselected package libmpfr4:armhf. +Preparing to unpack .../10-libmpfr4_3.1.5-1_armhf.deb ... +Unpacking libmpfr4:armhf (3.1.5-1) ... +Selecting previously unselected package libmpc3:armhf. +Preparing to unpack .../11-libmpc3_1.0.3-1+b2_armhf.deb ... +Unpacking libmpc3:armhf (1.0.3-1+b2) ... +Selecting previously unselected package cpp-6. +Preparing to unpack .../12-cpp-6_6.3.0-18+deb9u1_armhf.deb ... +Unpacking cpp-6 (6.3.0-18+deb9u1) ... +Selecting previously unselected package cpp. +Preparing to unpack .../13-cpp_4%3a6.3.0-4_armhf.deb ... +Unpacking cpp (4:6.3.0-4) ... +Selecting previously unselected package libcc1-0:armhf. +Preparing to unpack .../14-libcc1-0_6.3.0-18+deb9u1_armhf.deb ... +Unpacking libcc1-0:armhf (6.3.0-18+deb9u1) ... +Selecting previously unselected package libgomp1:armhf. +Preparing to unpack .../15-libgomp1_6.3.0-18+deb9u1_armhf.deb ... +Unpacking libgomp1:armhf (6.3.0-18+deb9u1) ... +Selecting previously unselected package libatomic1:armhf. +Preparing to unpack .../16-libatomic1_6.3.0-18+deb9u1_armhf.deb ... +Unpacking libatomic1:armhf (6.3.0-18+deb9u1) ... +Selecting previously unselected package libasan3:armhf. +Preparing to unpack .../17-libasan3_6.3.0-18+deb9u1_armhf.deb ... +Unpacking libasan3:armhf (6.3.0-18+deb9u1) ... +Selecting previously unselected package libubsan0:armhf. +Preparing to unpack .../18-libubsan0_6.3.0-18+deb9u1_armhf.deb ... +Unpacking libubsan0:armhf (6.3.0-18+deb9u1) ... +Selecting previously unselected package libgcc-6-dev:armhf. +Preparing to unpack .../19-libgcc-6-dev_6.3.0-18+deb9u1_armhf.deb ... +Unpacking libgcc-6-dev:armhf (6.3.0-18+deb9u1) ... +Selecting previously unselected package gcc-6. +Preparing to unpack .../20-gcc-6_6.3.0-18+deb9u1_armhf.deb ... +Unpacking gcc-6 (6.3.0-18+deb9u1) ... +Selecting previously unselected package gcc. +Preparing to unpack .../21-gcc_4%3a6.3.0-4_armhf.deb ... +Unpacking gcc (4:6.3.0-4) ... +Selecting previously unselected package libstdc++-6-dev:armhf. +Preparing to unpack .../22-libstdc++-6-dev_6.3.0-18+deb9u1_armhf.deb ... +Unpacking libstdc++-6-dev:armhf (6.3.0-18+deb9u1) ... +Selecting previously unselected package g++-6. +Preparing to unpack .../23-g++-6_6.3.0-18+deb9u1_armhf.deb ... +Unpacking g++-6 (6.3.0-18+deb9u1) ... +Selecting previously unselected package g++. +Preparing to unpack .../24-g++_4%3a6.3.0-4_armhf.deb ... +Unpacking g++ (4:6.3.0-4) ... +Selecting previously unselected package make. +Preparing to unpack .../25-make_4.1-9.1_armhf.deb ... +Unpacking make (4.1-9.1) ... +Selecting previously unselected package libdpkg-perl. +Preparing to unpack .../26-libdpkg-perl_1.18.25_all.deb ... +Unpacking libdpkg-perl (1.18.25) ... +Selecting previously unselected package patch. +Preparing to unpack .../27-patch_2.7.5-1+deb9u1_armhf.deb ... +Unpacking patch (2.7.5-1+deb9u1) ... +Selecting previously unselected package dpkg-dev. +Preparing to unpack .../28-dpkg-dev_1.18.25_all.deb ... +Unpacking dpkg-dev (1.18.25) ... +Selecting previously unselected package build-essential. +Preparing to unpack .../29-build-essential_12.3_armhf.deb ... +Unpacking build-essential (12.3) ... +Setting up libgomp1:armhf (6.3.0-18+deb9u1) ... +Setting up libatomic1:armhf (6.3.0-18+deb9u1) ... +Setting up perl-modules-5.24 (5.24.1-3+deb9u5) ... +Setting up libgdbm3:armhf (1.8.3-14) ... +Setting up libperl5.24:armhf (5.24.1-3+deb9u5) ... +Setting up libcc1-0:armhf (6.3.0-18+deb9u1) ... +Setting up make (4.1-9.1) ... +Setting up libasan3:armhf (6.3.0-18+deb9u1) ... +Setting up libubsan0:armhf (6.3.0-18+deb9u1) ... +Setting up linux-libc-dev:armhf (4.9.130-2) ... +Setting up perl (5.24.1-3+deb9u5) ... +update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode +Setting up libisl15:armhf (0.18-1) ... +Setting up patch (2.7.5-1+deb9u1) ... +Processing triggers for libc-bin (2.24-11+deb9u3) ... +Setting up xz-utils (5.2.2-1.2+b1) ... +update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode +Setting up libmpfr4:armhf (3.1.5-1) ... +Setting up libmpc3:armhf (1.0.3-1+b2) ... +Setting up binutils (2.28-5) ... +Setting up cpp-6 (6.3.0-18+deb9u1) ... +Setting up libc-dev-bin (2.24-11+deb9u3) ... +Setting up libc6-dev:armhf (2.24-11+deb9u3) ... +Setting up cpp (4:6.3.0-4) ... +Setting up libgcc-6-dev:armhf (6.3.0-18+deb9u1) ... +Setting up libstdc++-6-dev:armhf (6.3.0-18+deb9u1) ... +Setting up libdpkg-perl (1.18.25) ... +Setting up gcc-6 (6.3.0-18+deb9u1) ... +Setting up g++-6 (6.3.0-18+deb9u1) ... +Setting up dpkg-dev (1.18.25) ... +Setting up gcc (4:6.3.0-4) ... +Setting up g++ (4:6.3.0-4) ... +update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode +Setting up build-essential (12.3) ... +Processing triggers for libc-bin (2.24-11+deb9u3) ... +raspbianStretchDesktop.sh: line 101: sudp: command not found + +*** CONFIG *** +sudo: raspi-config: command not found +bash: /etc/systemd/system/getty@tty1.service.d/autologin.conf: No such file or directory +bash: /etc/systemd/system/getty@tty1.service.d/autologin.conf: No such file or directory +bash: /etc/systemd/system/getty@tty1.service.d/autologin.conf: No such file or directory + +*** SOFTWARE UPDATE *** +Reading package lists... Done +Building dependency tree +Reading state information... Done +bash-completion is already the newest version (1:2.1-4.3). +curl is already the newest version (7.52.1-5+deb9u8). +htop is already the newest version (2.0.2-1). +The following additional packages will be installed: + dc git-man liberror-perl libjq1 libonig4 +Suggested packages: + gettext-base git-daemon-run | git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb + git-arch git-cvs git-mediawiki git-svn +Recommended packages: + less rsync ssh-client +The following NEW packages will be installed: + dc dphys-swapfile git git-man jq liberror-perl libjq1 libonig4 +0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded. +Need to get 5,514 kB of archives. +After this operation, 23.4 MB of additional disk space will be used. +Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf liberror-perl all 0.17024-1 [26.9 kB] +Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf git-man all 1:2.11.0-3+deb9u4 [1,433 kB] +Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf git armhf 1:2.11.0-3+deb9u4 [3,661 kB] +Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf dc armhf 1.06.95-9+b3 [64.8 kB] +Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf dphys-swapfile all 20100506-3 [19.7 kB] +Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf libonig4 armhf 6.1.3-2 [128 kB] +Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf libjq1 armhf 1.5+dfsg-1.3 [122 kB] +Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf jq armhf 1.5+dfsg-1.3 [59.2 kB] +Fetched 5,514 kB in 1min 36s (57.4 kB/s) +Selecting previously unselected package liberror-perl. +(Reading database ... 20063 files and directories currently installed.) +Preparing to unpack .../0-liberror-perl_0.17024-1_all.deb ... +Unpacking liberror-perl (0.17024-1) ... +Selecting previously unselected package git-man. +Preparing to unpack .../1-git-man_1%3a2.11.0-3+deb9u4_all.deb ... +Unpacking git-man (1:2.11.0-3+deb9u4) ... +Selecting previously unselected package git. +Preparing to unpack .../2-git_1%3a2.11.0-3+deb9u4_armhf.deb ... +Unpacking git (1:2.11.0-3+deb9u4) ... +Selecting previously unselected package dc. +Preparing to unpack .../3-dc_1.06.95-9+b3_armhf.deb ... +Unpacking dc (1.06.95-9+b3) ... +Selecting previously unselected package dphys-swapfile. +Preparing to unpack .../4-dphys-swapfile_20100506-3_all.deb ... +Unpacking dphys-swapfile (20100506-3) ... +Selecting previously unselected package libonig4:armhf. +Preparing to unpack .../5-libonig4_6.1.3-2_armhf.deb ... +Unpacking libonig4:armhf (6.1.3-2) ... +Selecting previously unselected package libjq1:armhf. +Preparing to unpack .../6-libjq1_1.5+dfsg-1.3_armhf.deb ... +Unpacking libjq1:armhf (1.5+dfsg-1.3) ... +Selecting previously unselected package jq. +Preparing to unpack .../7-jq_1.5+dfsg-1.3_armhf.deb ... +Unpacking jq (1.5+dfsg-1.3) ... +Setting up git-man (1:2.11.0-3+deb9u4) ... +Setting up liberror-perl (0.17024-1) ... +Setting up libonig4:armhf (6.1.3-2) ... +Setting up libjq1:armhf (1.5+dfsg-1.3) ... +Processing triggers for libc-bin (2.24-11+deb9u3) ... +Setting up dc (1.06.95-9+b3) ... +Processing triggers for systemd (232-25+deb9u8) ... +Setting up git (1:2.11.0-3+deb9u4) ... +Setting up jq (1.5+dfsg-1.3) ... +Setting up dphys-swapfile (20100506-3) ... +Processing triggers for systemd (232-25+deb9u8) ... +Reading package lists... Done +Building dependency tree +Reading state information... Done +Suggested packages: + vnstati +The following NEW packages will be installed: + vnstat +0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. +Need to get 78.6 kB of archives. +After this operation, 206 kB of additional disk space will be used. +Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf vnstat armhf 1.15-2 [78.6 kB] +Fetched 78.6 kB in 1s (43.6 kB/s) +Selecting previously unselected package vnstat. +(Reading database ... 20988 files and directories currently installed.) +Preparing to unpack .../vnstat_1.15-2_armhf.deb ... +Unpacking vnstat (1.15-2) ... +Setting up vnstat (1.15-2) ... +Created symlink /etc/systemd/system/multi-user.target.wants/vnstat.service → /lib/systemd/system/vnstat.service. +Processing triggers for systemd (232-25+deb9u8) ... + +*** ADDING MAIN USER admin *** +Adding user `admin' ... +Adding new group `admin' (1001) ... +Adding new user `admin' (1001) with group `admin' ... +Creating home directory `/home/admin' ... +Copying files from `/etc/skel' ... +Adding user `admin' to group `sudo' ... +Adding user admin to group sudo +Done. +%sudo ALL=(ALL) NOPASSWD:ALL +*** ADDING SERVICE USER bitcoin +Adding user `bitcoin' ... +Adding new group `bitcoin' (1002) ... +Adding new user `bitcoin' (1002) with group `bitcoin' ... +Creating home directory `/home/bitcoin' ... +Copying files from `/etc/skel' ... + +*** SWAP FILE *** + +*** INCREASE OPEN FILE LIMIT *** + +*** BITCOIN *** +--2019-01-28 16:17:09-- https://bitcoin.org/bin/bitcoin-core-0.17.0.1/bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz +Resolving bitcoin.org (bitcoin.org)... 138.68.248.245 +Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected. +HTTP request sent, awaiting response... 200 OK +Length: 24306145 (23M) [application/octet-stream] +Saving to: ‘bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz’ + +bitcoin-0.17.0.1-arm-linu 100%[===================================>] 23.18M 220KB/s in 4m 36s + +2019-01-28 16:21:48 (85.9 KB/s) - ‘bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz’ saved [24306145/24306145] + +--2019-01-28 16:21:48-- https://bitcoin.org/laanwj-releases.asc +Resolving bitcoin.org (bitcoin.org)... 138.68.248.245 +Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected. +HTTP request sent, awaiting response... 200 OK +Length: 17940 (18K) [application/octet-stream] +Saving to: ‘laanwj-releases.asc’ + +laanwj-releases.asc 100%[===================================>] 17.52K --.-KB/s in 0.002s + +2019-01-28 16:21:50 (10.9 MB/s) - ‘laanwj-releases.asc’ saved [17940/17940] + +key 90C8019E36C2E964: +25 signatures not checked due to missing keys +gpg: /root/.gnupg/trustdb.gpg: trustdb created +gpg: key 90C8019E36C2E964: public key "Wladimir J. van der Laan (Bitcoin Core binary release signing key) " imported +gpg: Total number processed: 1 +gpg: imported: 1 +gpg: no ultimately trusted keys found +--2019-01-28 16:21:51-- https://bitcoin.org/bin/bitcoin-core-0.17.0.1/SHA256SUMS.asc +Resolving bitcoin.org (bitcoin.org)... 138.68.248.245 +Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected. +HTTP request sent, awaiting response... 200 OK +Length: 1979 (1.9K) [application/octet-stream] +Saving to: ‘SHA256SUMS.asc’ + +SHA256SUMS.asc 100%[===================================>] 1.93K --.-KB/s in 0s + +2019-01-28 16:21:52 (7.56 MB/s) - ‘SHA256SUMS.asc’ saved [1979/1979] + +goodSignature(1) +correctKey(1) +bitcoin-0.17.0/ +bitcoin-0.17.0/bin/ +bitcoin-0.17.0/bin/bitcoin-cli +bitcoin-0.17.0/bin/bitcoind +bitcoin-0.17.0/bin/bitcoin-qt +bitcoin-0.17.0/bin/bitcoin-tx +bitcoin-0.17.0/bin/test_bitcoin +bitcoin-0.17.0/include/ +bitcoin-0.17.0/include/bitcoinconsensus.h +bitcoin-0.17.0/lib/ +bitcoin-0.17.0/lib/libbitcoinconsensus.so +bitcoin-0.17.0/lib/libbitcoinconsensus.so.0 +bitcoin-0.17.0/lib/libbitcoinconsensus.so.0.0.0 +bitcoin-0.17.0/share/ +bitcoin-0.17.0/share/man/ +bitcoin-0.17.0/share/man/man1/ +bitcoin-0.17.0/share/man/man1/bitcoin-cli.1 +bitcoin-0.17.0/share/man/man1/bitcoind.1 +bitcoin-0.17.0/share/man/man1/bitcoin-qt.1 +bitcoin-0.17.0/share/man/man1/bitcoin-tx.1 + +*** LITECOIN *** +--2019-01-28 16:21:56-- https://download.litecoin.org/litecoin-0.16.3/linux/litecoin-0.16.3-arm-linux-gnueabihf.tar.gz +Resolving download.litecoin.org (download.litecoin.org)... 104.27.4.55, 104.27.5.55 +Connecting to download.litecoin.org (download.litecoin.org)|104.27.4.55|:443... connected. +HTTP request sent, awaiting response... 200 OK +Length: 9568024 (9.1M) [application/octet-stream] +Saving to: ‘litecoin-0.16.3-arm-linux-gnueabihf.tar.gz’ + +litecoin-0.16.3-arm-linux 100%[===================================>] 9.12M 631KB/s in 17s + +2019-01-28 16:22:14 (553 KB/s) - ‘litecoin-0.16.3-arm-linux-gnueabihf.tar.gz’ saved [9568024/9568024] + +litecoin-0.16.3/ +litecoin-0.16.3/bin/ +litecoin-0.16.3/bin/litecoin-cli +litecoin-0.16.3/bin/litecoind +litecoin-0.16.3/bin/litecoin-tx +litecoin-0.16.3/bin/test_litecoin +litecoin-0.16.3/share/ +litecoin-0.16.3/share/man/ +litecoin-0.16.3/share/man/man1/ +litecoin-0.16.3/share/man/man1/litecoin-cli.1 +litecoin-0.16.3/share/man/man1/litecoind.1 +litecoin-0.16.3/share/man/man1/litecoin-tx.1 + +*** LND *** +--2019-01-28 16:22:15-- https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/lnd-linux-armv7-v0.5.1-beta.tar.gz +Resolving github.com (github.com)... 140.82.118.3, 140.82.118.4 +Connecting to github.com (github.com)|140.82.118.3|:443... connected. +HTTP request sent, awaiting response... 302 Found +Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fd08b500-f311-11e8-8398-419cca1df903?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190128%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190128T162215Z&X-Amz-Expires=300&X-Amz-Signature=1fd405ad56e2cffe71ce7a3a3a8bb6444ff1f44f9984846ad309e4337d051ae4&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlnd-linux-armv7-v0.5.1-beta.tar.gz&response-content-type=application%2Foctet-stream [following] +--2019-01-28 16:22:15-- https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fd08b500-f311-11e8-8398-419cca1df903?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190128%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190128T162215Z&X-Amz-Expires=300&X-Amz-Signature=1fd405ad56e2cffe71ce7a3a3a8bb6444ff1f44f9984846ad309e4337d051ae4&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlnd-linux-armv7-v0.5.1-beta.tar.gz&response-content-type=application%2Foctet-stream +Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.96.51 +Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.96.51|:443... connected. +HTTP request sent, awaiting response... 200 OK +Length: 19198203 (18M) [application/octet-stream] +Saving to: ‘lnd-linux-armv7-v0.5.1-beta.tar.gz’ + +lnd-linux-armv7-v0.5.1-be 100%[===================================>] 18.31M 395KB/s in 54s + +2019-01-28 16:23:10 (347 KB/s) - ‘lnd-linux-armv7-v0.5.1-beta.tar.gz’ saved [19198203/19198203] + +--2019-01-28 16:23:10-- https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/manifest-v0.5.1-beta.txt +Resolving github.com (github.com)... 140.82.118.4, 140.82.118.3 +Connecting to github.com (github.com)|140.82.118.4|:443... connected. +HTTP request sent, awaiting response... 302 Found +Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-9178-5d26551a454e?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190128%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190128T162310Z&X-Amz-Expires=300&X-Amz-Signature=cc0a111446d71a59bc5b8a63c48f4747c4f05cae569cc6f3424c6a417362f90e&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt&response-content-type=application%2Foctet-stream [following] +--2019-01-28 16:23:10-- https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-9178-5d26551a454e?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190128%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190128T162310Z&X-Amz-Expires=300&X-Amz-Signature=cc0a111446d71a59bc5b8a63c48f4747c4f05cae569cc6f3424c6a417362f90e&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt&response-content-type=application%2Foctet-stream +Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.9.139 +Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.9.139|:443... connected. +HTTP request sent, awaiting response... 200 OK +Length: 2026 (2.0K) [application/octet-stream] +Saving to: ‘manifest-v0.5.1-beta.txt’ + +manifest-v0.5.1-beta.txt 100%[===================================>] 1.98K --.-KB/s in 0.002s + +2019-01-28 16:23:11 (939 KB/s) - ‘manifest-v0.5.1-beta.txt’ saved [2026/2026] + +--2019-01-28 16:23:11-- https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/manifest-v0.5.1-beta.txt.sig +Resolving github.com (github.com)... 140.82.118.3, 140.82.118.4 +Connecting to github.com (github.com)|140.82.118.3|:443... connected. +HTTP request sent, awaiting response... 302 Found +Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-8fb5-c3aa7d97cb88?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190128%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190128T162311Z&X-Amz-Expires=300&X-Amz-Signature=758f2b4a921e9fca493849a56a2134381bc99ba0099bc5b67fbf6c5ee411df69&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt.sig&response-content-type=application%2Foctet-stream [following] +--2019-01-28 16:23:11-- https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-8fb5-c3aa7d97cb88?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190128%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190128T162311Z&X-Amz-Expires=300&X-Amz-Signature=758f2b4a921e9fca493849a56a2134381bc99ba0099bc5b67fbf6c5ee411df69&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt.sig&response-content-type=application%2Foctet-stream +Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.9.139 +Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.9.139|:443... connected. +HTTP request sent, awaiting response... 200 OK +Length: 566 [application/octet-stream] +Saving to: ‘manifest-v0.5.1-beta.txt.sig’ + +manifest-v0.5.1-beta.txt. 100%[===================================>] 566 --.-KB/s in 0.001s + +2019-01-28 16:23:12 (810 KB/s) - ‘manifest-v0.5.1-beta.txt.sig’ saved [566/566] + +--2019-01-28 16:23:12-- https://keybase.io/roasbeef/pgp_keys.asc +Resolving keybase.io (keybase.io)... 52.55.1.130, 52.6.136.121 +Connecting to keybase.io (keybase.io)|52.55.1.130|:443... connected. +HTTP request sent, awaiting response... 200 OK +Length: 6909 (6.7K) [text/plain] +Saving to: ‘pgp_keys.asc’ + +pgp_keys.asc 100%[===================================>] 6.75K --.-KB/s in 0.003s + +2019-01-28 16:23:13 (2.30 MB/s) - ‘pgp_keys.asc’ saved [6909/6909] + +gpg: key 8B80CD2BB8BD8132: public key "Olaoluwa Osuntokun " imported +gpg: Total number processed: 1 +gpg: imported: 1 +goodSignature(1) +correctKey(1) +*** Installing Go *** +--2019-01-28 16:23:20-- https://storage.googleapis.com/golang/go1.11.linux-armv6l.tar.gz +Resolving storage.googleapis.com (storage.googleapis.com)... 216.58.206.80, 2a00:1450:4009:806::2010 +Connecting to storage.googleapis.com (storage.googleapis.com)|216.58.206.80|:443... connected. +HTTP request sent, awaiting response... 200 OK +Length: 101718267 (97M) [application/octet-stream] +Saving to: ‘go1.11.linux-armv6l.tar.gz’ + +go1.11.linux-armv6l.tar.g 100%[===================================>] 97.01M 733KB/s in 3m 6s + +2019-01-28 16:26:27 (535 KB/s) - ‘go1.11.linux-armv6l.tar.gz’ saved [101718267/101718267] + + + +*** RASPIBLITZ EXTRAS *** +Reading package lists... Done +Building dependency tree +Reading state information... Done +bc is already the newest version (1.06.95-9+b3). +The following NEW packages will be installed: + dialog +0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. +Need to get 240 kB of archives. +After this operation, 883 kB of additional disk space will be used. +Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf dialog armhf 1.3-20160828-2 [240 kB] +Fetched 240 kB in 1s (217 kB/s) +Selecting previously unselected package dialog. +(Reading database ... 21003 files and directories currently installed.) +Preparing to unpack .../dialog_1.3-20160828-2_armhf.deb ... +Unpacking dialog (1.3-20160828-2) ... +Setting up dialog (1.3-20160828-2) ... +Reading package lists... Done +Building dependency tree +Reading state information... Done +The following additional packages will be installed: + fuse libfuse2 +Recommended packages: + exfat-utils +The following NEW packages will be installed: + exfat-fuse fuse libfuse2 +0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. +Need to get 214 kB of archives. +After this operation, 426 kB of additional disk space will be used. +Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libfuse2 armhf 2.9.7-1+deb9u2 [116 kB] +Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf fuse armhf 2.9.7-1+deb9u2 [70.3 kB] +Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf exfat-fuse armhf 1.2.5-2 [27.6 kB] +Fetched 214 kB in 1s (142 kB/s) +Selecting previously unselected package libfuse2:armhf. +(Reading database ... 21161 files and directories currently installed.) +Preparing to unpack .../libfuse2_2.9.7-1+deb9u2_armhf.deb ... +Unpacking libfuse2:armhf (2.9.7-1+deb9u2) ... +Selecting previously unselected package fuse. +Preparing to unpack .../fuse_2.9.7-1+deb9u2_armhf.deb ... +Unpacking fuse (2.9.7-1+deb9u2) ... +Selecting previously unselected package exfat-fuse. +Preparing to unpack .../exfat-fuse_1.2.5-2_armhf.deb ... +Unpacking exfat-fuse (1.2.5-2) ... +Setting up libfuse2:armhf (2.9.7-1+deb9u2) ... +Processing triggers for libc-bin (2.24-11+deb9u3) ... +Setting up fuse (2.9.7-1+deb9u2) ... +update-initramfs: deferring update (trigger activated) +Setting up exfat-fuse (1.2.5-2) ... +Processing triggers for initramfs-tools (0.130) ... +ln: failed to create hard link '/boot/initrd.img-4.14.66+.dpkg-bak' => '/boot/initrd.img-4.14.66+': Operation not permitted +update-initramfs: Generating /boot/initrd.img-4.14.66+ +Image Name: uInitrd +Created: Mon Jan 28 16:26:50 2019 +Image Type: ARM Linux RAMDisk Image (uncompressed) +Data Size: 5715847 Bytes = 5581.88 kB = 5.45 MB +Load Address: 00000000 +Entry Point: 00000000 +Reading package lists... Done +Building dependency tree +Reading state information... Done +The following additional packages will be installed: + libevent-2.0-5 libminiupnpc10 libnatpmp1 transmission-common +Suggested packages: + minissdpd natpmp-utils transmission-daemon transmission-gtk +Recommended packages: + minissdpd +The following NEW packages will be installed: + libevent-2.0-5 libminiupnpc10 libnatpmp1 transmission-cli transmission-common +0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded. +Need to get 776 kB of archives. +After this operation, 2,814 kB of additional disk space will be used. +Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libevent-2.0-5 armhf 2.0.21-stable-3 [134 kB] +Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libminiupnpc10 armhf 1.9.20140610-4 [25.7 kB] +Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf libnatpmp1 armhf 20110808-4+b1 [8,338 B] +Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf transmission-common all 2.92-2+deb9u1 [288 kB] +Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf transmission-cli armhf 2.92-2+deb9u1 [320 kB] +Fetched 776 kB in 2s (326 kB/s) +Selecting previously unselected package libevent-2.0-5:armhf. +(Reading database ... 21196 files and directories currently installed.) +Preparing to unpack .../libevent-2.0-5_2.0.21-stable-3_armhf.deb ... +Unpacking libevent-2.0-5:armhf (2.0.21-stable-3) ... +Selecting previously unselected package libminiupnpc10:armhf. +Preparing to unpack .../libminiupnpc10_1.9.20140610-4_armhf.deb ... +Unpacking libminiupnpc10:armhf (1.9.20140610-4) ... +Selecting previously unselected package libnatpmp1:armhf. +Preparing to unpack .../libnatpmp1_20110808-4+b1_armhf.deb ... +Unpacking libnatpmp1:armhf (20110808-4+b1) ... +Selecting previously unselected package transmission-common. +Preparing to unpack .../transmission-common_2.92-2+deb9u1_all.deb ... +Unpacking transmission-common (2.92-2+deb9u1) ... +Selecting previously unselected package transmission-cli. +Preparing to unpack .../transmission-cli_2.92-2+deb9u1_armhf.deb ... +Unpacking transmission-cli (2.92-2+deb9u1) ... +Setting up libminiupnpc10:armhf (1.9.20140610-4) ... +Setting up libnatpmp1:armhf (20110808-4+b1) ... +Setting up transmission-common (2.92-2+deb9u1) ... +Processing triggers for libc-bin (2.24-11+deb9u3) ... +Setting up libevent-2.0-5:armhf (2.0.21-stable-3) ... +Setting up transmission-cli (2.92-2+deb9u1) ... +Processing triggers for libc-bin (2.24-11+deb9u3) ... +Reading package lists... Done +Building dependency tree +Reading state information... Done +The following additional packages will be installed: + libtorrent19 libxmlrpc-core-c3 +Suggested packages: + screen | dtach +The following NEW packages will be installed: + libtorrent19 libxmlrpc-core-c3 rtorrent +0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. +Need to get 891 kB of archives. +After this operation, 2,281 kB of additional disk space will be used. +Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libxmlrpc-core-c3 armhf 1.33.14-4 [128 kB] +Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libtorrent19 armhf 0.13.6-1.1 [345 kB] +Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf rtorrent armhf 0.9.6-2+b1 [418 kB] +Fetched 891 kB in 7s (112 kB/s) +Selecting previously unselected package libxmlrpc-core-c3. +(Reading database ... 21337 files and directories currently installed.) +Preparing to unpack .../libxmlrpc-core-c3_1.33.14-4_armhf.deb ... +Unpacking libxmlrpc-core-c3 (1.33.14-4) ... +Selecting previously unselected package libtorrent19:armhf. +Preparing to unpack .../libtorrent19_0.13.6-1.1_armhf.deb ... +Unpacking libtorrent19:armhf (0.13.6-1.1) ... +Selecting previously unselected package rtorrent. +Preparing to unpack .../rtorrent_0.9.6-2+b1_armhf.deb ... +Unpacking rtorrent (0.9.6-2+b1) ... +Setting up libtorrent19:armhf (0.13.6-1.1) ... +Setting up libxmlrpc-core-c3 (1.33.14-4) ... +Setting up rtorrent (0.9.6-2+b1) ... +Processing triggers for libc-bin (2.24-11+deb9u3) ... +Reading package lists... Done +Building dependency tree +Reading state information... Done +Suggested packages: + byobu | screenie | iselect ncurses-term +The following NEW packages will be installed: + screen +0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. +Need to get 568 kB of archives. +After this operation, 860 kB of additional disk space will be used. +Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf screen armhf 4.5.0-6 [568 kB] +Fetched 568 kB in 1s (349 kB/s) +Selecting previously unselected package screen. +(Reading database ... 21374 files and directories currently installed.) +Preparing to unpack .../screen_4.5.0-6_armhf.deb ... +Unpacking screen (4.5.0-6) ... +Processing triggers for systemd (232-25+deb9u8) ... +Setting up screen (4.5.0-6) ... +Processing triggers for systemd (232-25+deb9u8) ... +Cloning into 'raspiblitz'... +remote: Enumerating objects: 101, done. +remote: Counting objects: 100% (101/101), done. +remote: Compressing objects: 100% (69/69), done. +remote: Total 4843 (delta 60), reused 62 (delta 32), pack-reused 4742 +Receiving objects: 100% (4843/4843), 16.39 MiB | 267.00 KiB/s, done. +Resolving deltas: 100% (3414/3414), done. +cp: -r not specified; omitting directory '/home/admin/raspiblitz/home.admin/config.scripts' +bash: /home/pi/.bashrc: No such file or directory +bash: /home/pi/.bashrc: No such file or directory +bash: /home/pi/.bashrc: No such file or directory +bash: /home/pi/.bashrc: No such file or directory + +*** HARDENING *** +Reading package lists... Done +Building dependency tree +Reading state information... Done +Suggested packages: + mailx system-log-daemon monit +Recommended packages: + python iptables whois python3-pyinotify +The following NEW packages will be installed: + fail2ban +0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. +Need to get 0 B/288 kB of archives. +After this operation, 1,321 kB of additional disk space will be used. +Selecting previously unselected package fail2ban. +(Reading database ... 21434 files and directories currently installed.) +Preparing to unpack .../fail2ban_0.9.6-2_all.deb ... +Unpacking fail2ban (0.9.6-2) ... +Setting up fail2ban (0.9.6-2) ... +Processing triggers for systemd (232-25+deb9u8) ... + +*** RASPI BOOSTRAP SERVICE *** +Created symlink /etc/systemd/system/multi-user.target.wants/bootstrap.service → /etc/systemd/system/bootstrap.service. + +*** RASPI BACKGROUND SERVICE *** +Created symlink /etc/systemd/system/multi-user.target.wants/background.service → /etc/systemd/system/background.service. +*** Adding Tor Sources to sources.list *** +deb http://deb.torproject.org/torproject.org stretch main +deb-src http://deb.torproject.org/torproject.org stretch main +OK + +*** Installing dirmngr *** +Reading package lists... Done +Building dependency tree +Reading state information... Done +dirmngr is already the newest version (2.1.18-8~deb9u3). +0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. + +*** Fetching GPG key *** +gpg: keyserver receive failed: No data +gpg: WARNING: nothing exported +gpg: no valid OpenPGP data found. +gpg: keyserver receive failed: No data +gpg: WARNING: nothing exported +gpg: no valid OpenPGP data found. +!!!!!! Please check if the above really worked! + +********************************************** +ALMOST READY +********************************************** + +Your SD Card Image for RaspiBlitz is almost ready. +Last step is to install LCD drivers. This will reboot your Pi when done. + +Maybe take the chance and look thru the output above if you can spot any errror. + +After final reboot - your SD Card Image is ready. + +IMPORTANT IF WANT TO MAKE A RELEASE IMAGE FROM THIS BUILD: +login once after reboot without HDD and run 'XXprepareRelease.sh' + +Press ENTER to install LCD and reboot ... + +sudo: raspi-config: command not found + + + + + + + + + + + + + + + + + + + + + + + + + + ┌──────────────────────────────────Display─────────────────────────────────────┐ + │ Are you using the default display available from Amazon? │ + │ Select 'No' if you are using the Swiss version from play-zone.ch! │ + ├──────────────────────────────────────────────────────────────────────────────┤ + │ < Yes > < No > │ + └──────────────────────────────────────────────────────────────────────────────┘ + + + + + + + + + + + + + + + + + + + + + + + + +E: Unable to locate package raspberrypi-bootloader +E: No packages found +Cloning into 'LCD-show'... +remote: Enumerating objects: 8, done. +remote: Counting objects: 100% (8/8), done. +remote: Compressing objects: 100% (8/8), done. +remote: Total 861 (delta 1), reused 0 (delta 0), pack-reused 853 +Receiving objects: 100% (861/861), 460.67 KiB | 424.00 KiB/s, done. +Resolving deltas: 100% (548/548), done. +cp: cannot create regular file '/boot/overlays/': Not a directory +cp: cannot create regular file '/boot/overlays/tft35a.dtbo': No such file or directory +cp: cannot create regular file '/usr/share/X11/xorg.conf.d/': Not a directory +this is not raspberrypi kernel, no need to update touch configure, reboot +Connection to 192.168.1.175 closed by remote host. +Connection to 192.168.1.175 closed. +openoms@buidl:~$ diff --git a/DietPi/copyhdd-output b/DietPi/copyhdd-output new file mode 100644 index 000000000..85e9aebb3 --- /dev/null +++ b/DietPi/copyhdd-output @@ -0,0 +1,110 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +*** Check 1st HDD *** +OK - HDD as sda1 found + +*** Copy Blockchain form a second HDD *** + +WARNING: The RaspiBlitz cannot run 2 HDDs without extra Power! + +You can use a Y cable for the second HDD to inject extra power. +Like this one: https://www.amazon.de/dp/B00ZJBIHVY +If you see on LCD a error on connecting the 2nd HDD do a restart. + +You can use the HDD of another RaspiBlitz for this. +The 2nd HDD needs to be formated Ext4/exFAT and the folder 'bitcoin' is in root of HDD. + +********************************** +--> Please connect now the 2nd HDD +********************************** + +If 2nd HDD is connected but setup does not continue, +then cancel (CTRL+c) and reboot. +OK - 2nd HDD found + +*** Mounting 2nd HDD *** +try ext4 .. +OK - 2nd HDD mounted at /mnt/genesis + +*** Copy Blockchain *** +sudo: rsync: command not found +cleaning up - ok if files do not exists +rm: cannot remove '/mnt/hdd/bitcoin/bitcoin.conf': No such file or directory +rm: cannot remove '/mnt/hdd/bitcoin/bitcoin.pid': No such file or directory +rm: cannot remove '/mnt/hdd/bitcoin/testnet3/banlist.dat': No such file or directory +rm: cannot remove '/mnt/hdd/bitcoin/testnet3/debug.log': No such file or directory +rm: cannot remove '/mnt/hdd/bitcoin/testnet3/fee_estimates.dat': No such file or directory +rm: cannot remove '/mnt/hdd/bitcoin/testnet3/mempool.dat': No such file or directory +rm: cannot remove '/mnt/hdd/bitcoin/testnet3/peers.dat': No such file or directory +OK - Copy done :) + +---> You can now disconnect the 2nd HDD + +*** Checking HDD *** +OK - HDD is ready. + +*** Prepare bitcoin *** +OK - bitcoin setup ready + +*** Start bitcoin *** +This can take a while .. + + + + + + diff --git a/DietPi/install.md b/DietPi/install.md index e3063038d..bdaa670c0 100644 --- a/DietPi/install.md +++ b/DietPi/install.md @@ -22,22 +22,13 @@ Opt out of survey > Ok > Ok run (copy from the terminal output): `ssh-keygen -f "/home/buidl/.ssh/known_hosts" -R "dietpi.IP"` `ssh root@[IP-OF-DIETPI]` -Ok > Choose Install > "Do you wish to continue with DietPi as a pure minimal image?" > Ok +Ok > Install fail2ban > Install > Ok Reboots again `ssh root@[IP-OF-DIETPI]` Now only the bash prompt opens -```sudo adduser --disabled-password --gecos "" pi -echo "pi:raspiblitz" | sudo chpasswd -sudo adduser pi sudo -exit -``` -`ssh pi@[IP-OF-DIETPI]` -password: `raspiblitz` - -now at: -`dietpi@DietPi:~$` +sudo apt install rsync use: wget https://raw.githubusercontent.com/[GITHUB-USERNAME]/raspiblitz/[BRANCH]/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh [BRANCH] [GITHUB-USERNAME] diff --git a/build.sdcard/raspbianStretchDesktop.sh b/build.sdcard/raspbianStretchDesktop.sh index 9c6953eae..a9af5aa08 100644 --- a/build.sdcard/raspbianStretchDesktop.sh +++ b/build.sdcard/raspbianStretchDesktop.sh @@ -92,8 +92,9 @@ sudo apt-get upgrade -f -y --allow-change-held-packages if [ "${baseImage}" = "dietpi" ]; then echo "" echo "*** PREPARE DietPi ***" - # echo "renaming dietpi user to pi" - # sudo usermod -l pi dietpi + echo "renaming dietpi user to pi" + sudo usermod -l pi dietpi + sudo adduser pi sudo echo "install pip" sudo apt-get update sudo apt-get remove -y fail2ban