mirror of
https://github.com/skot/ESP-Miner.git
synced 2025-03-17 13:22:53 +01:00
21 lines
1.6 KiB
Markdown
21 lines
1.6 KiB
Markdown
|
## Flashing Factory Image
|
||
|
|
You can flash [factory images](https://github.com/skot/ESP-Miner/releases) to your Bitaxe using generic ESP32 flashing tools such as the [esptool-js website](https://espressif.github.io/esptool-js/)
|
||
|
|
|
||
|
|
- Power up your bitaxe via the barrel connector
|
||
|
|
- attach your bitaxe USB to your computer
|
||
|
|
- open of the [esptool-js website](https://espressif.github.io/esptool-js/) in Chrome
|
||
|
|
- Under the `Program` heading set the baudrate to 921600 (this should be the default)
|
||
|
|
- click Connect
|
||
|
|
- Chrome will popup a window asking you which serial port you weant to connect to.
|
||
|
|
- on Mac and Linux the correct serial port will have something similar to `usbmodem1434401` in the name
|
||
|
|
- on PC it will prolly be one of those COM ports. Good luck.
|
||
|
|
- Select the proper serial port and then click connect
|
||
|
|
- Once the ESP Tool has connected to your Bitaxe over serial, Set the Flash Address to `0x0`
|
||
|
|
- Under File click "Choose File" and select the [factory image](https://github.com/skot/ESP-Miner/releases) you want to flash. it's called something like `esp-miner-factory-400-v2.1.5d.bin` Be sure to use the image with the same version number as your Bitaxe (400 in this case)
|
||
|
|
- Down below click the "Program" button
|
||
|
|
- Wait paitiently.
|
||
|
|
- Keep waiting until the console on ESP Tool says "Leaving..."
|
||
|
|
- If you are _sure_ you have seen ESP Tool say "Leaving..." then you're bitaxe might restart.
|
||
|
|
- If you bitaxe hasn't restarted, you can press the RESET button on the bitaxe
|
||
|
|
- The self test should run. this can take a second. You'll need to press the RESET button on the bitaxe once the self test has passed.
|