mirror of
https://github.com/skot/ESP-Miner.git
synced 2025-04-10 12:59:25 +02:00
cleanup connect Kconfig
This commit is contained in:
Skot Croshere
johnny9
parent
7226f569eb
commit
51b3d344ed
@ -1,292 +1,84 @@
|
||||
menu "Example Connection Configuration"
|
||||
menu "WiFi Connection Configuration"
|
||||
|
||||
config EXAMPLE_GPIO_RANGE_MIN
|
||||
int
|
||||
default 0
|
||||
|
||||
config EXAMPLE_GPIO_RANGE_MAX
|
||||
int
|
||||
default 33 if IDF_TARGET_ESP32
|
||||
default 46 if IDF_TARGET_ESP32S2
|
||||
default 19 if IDF_TARGET_ESP32C3
|
||||
default 48 if IDF_TARGET_ESP32S3
|
||||
|
||||
config EXAMPLE_CONNECT_WIFI
|
||||
bool "connect using WiFi interface"
|
||||
default y
|
||||
config EXAMPLE_WIFI_SSID
|
||||
string "WiFi SSID"
|
||||
default "myssid"
|
||||
help
|
||||
Protocol examples can use Wi-Fi and/or Ethernet to connect to the network.
|
||||
Choose this option to connect with WiFi
|
||||
SSID (network name) for the example to connect to.
|
||||
|
||||
if EXAMPLE_CONNECT_WIFI
|
||||
config EXAMPLE_WIFI_SSID
|
||||
string "WiFi SSID"
|
||||
default "myssid"
|
||||
help
|
||||
SSID (network name) for the example to connect to.
|
||||
|
||||
config EXAMPLE_WIFI_PASSWORD
|
||||
string "WiFi Password"
|
||||
default "mypassword"
|
||||
help
|
||||
WiFi password (WPA or WPA2) for the example to use.
|
||||
Can be left blank if the network has no security set.
|
||||
|
||||
choice EXAMPLE_WIFI_SCAN_METHOD
|
||||
prompt "WiFi Scan Method"
|
||||
default EXAMPLE_WIFI_SCAN_METHOD_ALL_CHANNEL
|
||||
help
|
||||
WiFi scan method:
|
||||
|
||||
If "Fast" is selected, scan will end after find SSID match AP.
|
||||
|
||||
If "All Channel" is selected, scan will end after scan all the channel.
|
||||
|
||||
config EXAMPLE_WIFI_SCAN_METHOD_FAST
|
||||
bool "Fast"
|
||||
config EXAMPLE_WIFI_SCAN_METHOD_ALL_CHANNEL
|
||||
bool "All Channel"
|
||||
endchoice
|
||||
|
||||
menu "WiFi Scan threshold"
|
||||
config EXAMPLE_WIFI_SCAN_RSSI_THRESHOLD
|
||||
int "WiFi minimum rssi"
|
||||
range -127 0
|
||||
|
||||
default -127
|
||||
help
|
||||
The minimum rssi to accept in the scan mode.
|
||||
|
||||
choice EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD
|
||||
prompt "WiFi Scan auth mode threshold"
|
||||
default EXAMPLE_WIFI_AUTH_OPEN
|
||||
help
|
||||
The weakest authmode to accept in the scan mode.
|
||||
|
||||
config EXAMPLE_WIFI_AUTH_OPEN
|
||||
bool "OPEN"
|
||||
config EXAMPLE_WIFI_AUTH_WEP
|
||||
bool "WEP"
|
||||
config EXAMPLE_WIFI_AUTH_WPA_PSK
|
||||
bool "WPA PSK"
|
||||
config EXAMPLE_WIFI_AUTH_WPA2_PSK
|
||||
bool "WPA2 PSK"
|
||||
config EXAMPLE_WIFI_AUTH_WPA_WPA2_PSK
|
||||
bool "WPA WPA2 PSK"
|
||||
config EXAMPLE_WIFI_AUTH_WPA2_ENTERPRISE
|
||||
bool "WPA2 ENTERPRISE"
|
||||
config EXAMPLE_WIFI_AUTH_WPA3_PSK
|
||||
bool "WPA3 PSK"
|
||||
config EXAMPLE_WIFI_AUTH_WPA2_WPA3_PSK
|
||||
bool "WPA2 WPA3 PSK"
|
||||
config EXAMPLE_WIFI_AUTH_WAPI_PSK
|
||||
bool "WAPI PSK"
|
||||
endchoice
|
||||
endmenu
|
||||
|
||||
choice EXAMPLE_WIFI_CONNECT_AP_SORT_METHOD
|
||||
prompt "WiFi Connect AP Sort Method"
|
||||
default EXAMPLE_WIFI_CONNECT_AP_BY_SIGNAL
|
||||
help
|
||||
WiFi connect AP sort method:
|
||||
|
||||
If "Signal" is selected, Sort matched APs in scan list by RSSI.
|
||||
|
||||
If "Security" is selected, Sort matched APs in scan list by security mode.
|
||||
|
||||
config EXAMPLE_WIFI_CONNECT_AP_BY_SIGNAL
|
||||
bool "Signal"
|
||||
config EXAMPLE_WIFI_CONNECT_AP_BY_SECURITY
|
||||
bool "Security"
|
||||
endchoice
|
||||
endif
|
||||
|
||||
config EXAMPLE_CONNECT_ETHERNET
|
||||
bool "connect using Ethernet interface"
|
||||
default n
|
||||
config EXAMPLE_WIFI_PASSWORD
|
||||
string "WiFi Password"
|
||||
default "mypassword"
|
||||
help
|
||||
Protocol examples can use Wi-Fi and/or Ethernet to connect to the network.
|
||||
Choose this option to connect with Ethernet
|
||||
WiFi password (WPA or WPA2) for the example to use.
|
||||
Can be left blank if the network has no security set.
|
||||
|
||||
if EXAMPLE_CONNECT_ETHERNET
|
||||
config EXAMPLE_USE_SPI_ETHERNET
|
||||
bool
|
||||
|
||||
choice EXAMPLE_ETHERNET_TYPE
|
||||
prompt "Ethernet Type"
|
||||
default EXAMPLE_USE_INTERNAL_ETHERNET if IDF_TARGET_ESP32
|
||||
default EXAMPLE_USE_W5500
|
||||
help
|
||||
Select which kind of Ethernet will be used in the example.
|
||||
|
||||
config EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
depends on IDF_TARGET_ESP32
|
||||
select ETH_USE_ESP32_EMAC
|
||||
bool "Internal EMAC"
|
||||
help
|
||||
Select internal Ethernet MAC controller.
|
||||
|
||||
config EXAMPLE_USE_DM9051
|
||||
bool "DM9051 Module"
|
||||
select EXAMPLE_USE_SPI_ETHERNET
|
||||
select ETH_USE_SPI_ETHERNET
|
||||
select ETH_SPI_ETHERNET_DM9051
|
||||
help
|
||||
Select external SPI-Ethernet module.
|
||||
|
||||
config EXAMPLE_USE_W5500
|
||||
bool "W5500 Module"
|
||||
select EXAMPLE_USE_SPI_ETHERNET
|
||||
select ETH_USE_SPI_ETHERNET
|
||||
select ETH_SPI_ETHERNET_W5500
|
||||
help
|
||||
Select external SPI-Ethernet module (W5500).
|
||||
|
||||
config EXAMPLE_USE_OPENETH
|
||||
bool "OpenCores Ethernet MAC (EXPERIMENTAL)"
|
||||
select ETH_USE_OPENETH
|
||||
help
|
||||
When this option is enabled, the example is built with support for
|
||||
OpenCores Ethernet MAC, which allows testing the example in QEMU.
|
||||
Note that this option is used for internal testing purposes, and
|
||||
not officially supported. Examples built with this option enabled
|
||||
will not run on a real ESP32 chip.
|
||||
|
||||
endchoice # EXAMPLE_ETHERNET_TYPE
|
||||
|
||||
if EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
choice EXAMPLE_ETH_PHY_MODEL
|
||||
prompt "Ethernet PHY Device"
|
||||
default EXAMPLE_ETH_PHY_IP101
|
||||
help
|
||||
Select the Ethernet PHY device to use in the example.
|
||||
|
||||
config EXAMPLE_ETH_PHY_IP101
|
||||
bool "IP101"
|
||||
help
|
||||
IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
|
||||
Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
|
||||
|
||||
config EXAMPLE_ETH_PHY_RTL8201
|
||||
bool "RTL8201/SR8201"
|
||||
help
|
||||
RTL8201F/SR8201F is a single port 10/100Mb Ethernet Transceiver with auto MDIX.
|
||||
Goto http://www.corechip-sz.com/productsview.asp?id=22 for more information about it.
|
||||
|
||||
config EXAMPLE_ETH_PHY_LAN87XX
|
||||
bool "LAN87xx"
|
||||
help
|
||||
Below chips are supported:
|
||||
LAN8710A is a small footprint MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and
|
||||
flexPWR® Technology.
|
||||
LAN8720A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support.
|
||||
LAN8740A/LAN8741A is a small footprint MII/RMII 10/100 Energy Efficient Ethernet Transceiver
|
||||
with HP Auto-MDIX and flexPWR® Technology.
|
||||
LAN8742A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and
|
||||
flexPWR® Technology.
|
||||
Goto https://www.microchip.com for more information about them.
|
||||
|
||||
config EXAMPLE_ETH_PHY_DP83848
|
||||
bool "DP83848"
|
||||
help
|
||||
DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
|
||||
Goto http://www.ti.com/product/DP83848J for more information about it.
|
||||
endchoice
|
||||
|
||||
config EXAMPLE_ETH_MDC_GPIO
|
||||
int "SMI MDC GPIO number"
|
||||
range EXAMPLE_GPIO_RANGE_MIN EXAMPLE_GPIO_RANGE_MAX
|
||||
default 23
|
||||
help
|
||||
Set the GPIO number used by SMI MDC.
|
||||
|
||||
config EXAMPLE_ETH_MDIO_GPIO
|
||||
int "SMI MDIO GPIO number"
|
||||
range EXAMPLE_GPIO_RANGE_MIN EXAMPLE_GPIO_RANGE_MAX
|
||||
default 18
|
||||
help
|
||||
Set the GPIO number used by SMI MDIO.
|
||||
endif
|
||||
|
||||
if EXAMPLE_USE_SPI_ETHERNET
|
||||
config EXAMPLE_ETH_SPI_HOST
|
||||
int "SPI Host Number"
|
||||
range 0 2
|
||||
default 1
|
||||
help
|
||||
Set the SPI host used to communicate with the SPI Ethernet Controller.
|
||||
|
||||
config EXAMPLE_ETH_SPI_SCLK_GPIO
|
||||
int "SPI SCLK GPIO number"
|
||||
range EXAMPLE_GPIO_RANGE_MIN EXAMPLE_GPIO_RANGE_MAX
|
||||
default 14
|
||||
help
|
||||
Set the GPIO number used by SPI SCLK.
|
||||
|
||||
config EXAMPLE_ETH_SPI_MOSI_GPIO
|
||||
int "SPI MOSI GPIO number"
|
||||
range EXAMPLE_GPIO_RANGE_MIN EXAMPLE_GPIO_RANGE_MAX
|
||||
default 13
|
||||
help
|
||||
Set the GPIO number used by SPI MOSI.
|
||||
|
||||
config EXAMPLE_ETH_SPI_MISO_GPIO
|
||||
int "SPI MISO GPIO number"
|
||||
range EXAMPLE_GPIO_RANGE_MIN EXAMPLE_GPIO_RANGE_MAX
|
||||
default 12
|
||||
help
|
||||
Set the GPIO number used by SPI MISO.
|
||||
|
||||
config EXAMPLE_ETH_SPI_CS_GPIO
|
||||
int "SPI CS GPIO number"
|
||||
range EXAMPLE_GPIO_RANGE_MIN EXAMPLE_GPIO_RANGE_MAX
|
||||
default 15
|
||||
help
|
||||
Set the GPIO number used by SPI CS.
|
||||
|
||||
config EXAMPLE_ETH_SPI_CLOCK_MHZ
|
||||
int "SPI clock speed (MHz)"
|
||||
range 5 80
|
||||
default 36
|
||||
help
|
||||
Set the clock speed (MHz) of SPI interface.
|
||||
|
||||
config EXAMPLE_ETH_SPI_INT_GPIO
|
||||
int "Interrupt GPIO number"
|
||||
range EXAMPLE_GPIO_RANGE_MIN EXAMPLE_GPIO_RANGE_MAX
|
||||
default 4
|
||||
help
|
||||
Set the GPIO number used by the SPI Ethernet module interrupt line.
|
||||
endif # EXAMPLE_USE_SPI_ETHERNET
|
||||
|
||||
config EXAMPLE_ETH_PHY_RST_GPIO
|
||||
int "PHY Reset GPIO number"
|
||||
range -1 EXAMPLE_GPIO_RANGE_MAX
|
||||
default 5
|
||||
help
|
||||
Set the GPIO number used to reset PHY chip.
|
||||
Set to -1 to disable PHY chip hardware reset.
|
||||
|
||||
config EXAMPLE_ETH_PHY_ADDR
|
||||
int "PHY Address"
|
||||
range 0 31 if EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
default 1
|
||||
help
|
||||
Set PHY address according your board schematic.
|
||||
endif # EXAMPLE_CONNECT_ETHERNET
|
||||
|
||||
config EXAMPLE_CONNECT_IPV6
|
||||
bool "Obtain IPv6 address"
|
||||
default n
|
||||
depends on EXAMPLE_CONNECT_WIFI || EXAMPLE_CONNECT_ETHERNET
|
||||
select LWIP_IPV6
|
||||
choice EXAMPLE_WIFI_SCAN_METHOD
|
||||
prompt "WiFi Scan Method"
|
||||
default EXAMPLE_WIFI_SCAN_METHOD_ALL_CHANNEL
|
||||
help
|
||||
By default, examples will wait until IPv4 and IPv6 local link addresses are obtained.
|
||||
Disable this option if the network does not support IPv6.
|
||||
Choose the preferred IPv6 address type if the connection code should wait until other than
|
||||
the local link address gets assigned.
|
||||
Consider enabling IPv6 stateless address autoconfiguration (SLAAC) in the LWIP component.
|
||||
WiFi scan method:
|
||||
|
||||
If "Fast" is selected, scan will end after find SSID match AP.
|
||||
|
||||
If "All Channel" is selected, scan will end after scan all the channel.
|
||||
|
||||
config EXAMPLE_WIFI_SCAN_METHOD_FAST
|
||||
bool "Fast"
|
||||
config EXAMPLE_WIFI_SCAN_METHOD_ALL_CHANNEL
|
||||
bool "All Channel"
|
||||
endchoice
|
||||
|
||||
|
||||
config EXAMPLE_WIFI_SCAN_RSSI_THRESHOLD
|
||||
int "WiFi minimum rssi"
|
||||
range -127 0
|
||||
|
||||
default -127
|
||||
help
|
||||
The minimum rssi to accept in the scan mode.
|
||||
|
||||
choice EXAMPLE_WIFI_SCAN_AUTH_MODE_THRESHOLD
|
||||
prompt "WiFi Scan auth mode threshold"
|
||||
default EXAMPLE_WIFI_AUTH_OPEN
|
||||
help
|
||||
The weakest authmode to accept in the scan mode.
|
||||
|
||||
config EXAMPLE_WIFI_AUTH_OPEN
|
||||
bool "OPEN"
|
||||
config EXAMPLE_WIFI_AUTH_WEP
|
||||
bool "WEP"
|
||||
config EXAMPLE_WIFI_AUTH_WPA_PSK
|
||||
bool "WPA PSK"
|
||||
config EXAMPLE_WIFI_AUTH_WPA2_PSK
|
||||
bool "WPA2 PSK"
|
||||
config EXAMPLE_WIFI_AUTH_WPA_WPA2_PSK
|
||||
bool "WPA WPA2 PSK"
|
||||
config EXAMPLE_WIFI_AUTH_WPA2_ENTERPRISE
|
||||
bool "WPA2 ENTERPRISE"
|
||||
config EXAMPLE_WIFI_AUTH_WPA3_PSK
|
||||
bool "WPA3 PSK"
|
||||
config EXAMPLE_WIFI_AUTH_WPA2_WPA3_PSK
|
||||
bool "WPA2 WPA3 PSK"
|
||||
config EXAMPLE_WIFI_AUTH_WAPI_PSK
|
||||
bool "WAPI PSK"
|
||||
endchoice
|
||||
|
||||
|
||||
choice EXAMPLE_WIFI_CONNECT_AP_SORT_METHOD
|
||||
prompt "WiFi Connect AP Sort Method"
|
||||
default EXAMPLE_WIFI_CONNECT_AP_BY_SIGNAL
|
||||
help
|
||||
WiFi connect AP sort method:
|
||||
|
||||
If "Signal" is selected, Sort matched APs in scan list by RSSI.
|
||||
|
||||
If "Security" is selected, Sort matched APs in scan list by security mode.
|
||||
|
||||
config EXAMPLE_WIFI_CONNECT_AP_BY_SIGNAL
|
||||
bool "Signal"
|
||||
config EXAMPLE_WIFI_CONNECT_AP_BY_SECURITY
|
||||
bool "Security"
|
||||
endchoice
|
||||
|
||||
endmenu
|
||||
@ -26,8 +26,6 @@
|
||||
|
||||
#define NR_OF_IP_ADDRESSES_TO_WAIT_FOR (s_active_interfaces)
|
||||
|
||||
#define EXAMPLE_DO_CONNECT CONFIG_EXAMPLE_CONNECT_WIFI || CONFIG_EXAMPLE_CONNECT_ETHERNET
|
||||
|
||||
#if CONFIG_EXAMPLE_WIFI_SCAN_METHOD_FAST
|
||||
#define EXAMPLE_WIFI_SCAN_METHOD WIFI_FAST_SCAN
|
||||
#elif CONFIG_EXAMPLE_WIFI_SCAN_METHOD_ALL_CHANNEL
|
||||
@ -87,11 +85,9 @@ static void start(void)
|
||||
s_example_esp_netif = wifi_start();
|
||||
s_active_interfaces++;
|
||||
|
||||
|
||||
#if EXAMPLE_DO_CONNECT
|
||||
/* create semaphore if at least one interface is active */
|
||||
s_semph_get_ip_addrs = xSemaphoreCreateCounting(NR_OF_IP_ADDRESSES_TO_WAIT_FOR, 0);
|
||||
#endif
|
||||
|
||||
|
||||
}
|
||||
|
||||
@ -104,7 +100,6 @@ static void stop(void)
|
||||
|
||||
}
|
||||
|
||||
#if EXAMPLE_DO_CONNECT
|
||||
static esp_ip4_addr_t s_ip_addr;
|
||||
|
||||
static void on_got_ip(void *arg, esp_event_base_t event_base,
|
||||
@ -119,16 +114,15 @@ static void on_got_ip(void *arg, esp_event_base_t event_base,
|
||||
memcpy(&s_ip_addr, &event->ip_info.ip, sizeof(s_ip_addr));
|
||||
xSemaphoreGive(s_semph_get_ip_addrs);
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
esp_err_t wifi_connect(void)
|
||||
{
|
||||
#if EXAMPLE_DO_CONNECT
|
||||
if (s_semph_get_ip_addrs != NULL) {
|
||||
return ESP_ERR_INVALID_STATE;
|
||||
}
|
||||
#endif
|
||||
|
||||
start();
|
||||
ESP_ERROR_CHECK(esp_register_shutdown_handler(&stop));
|
||||
ESP_LOGI(TAG, "Waiting for IP(s)");
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user