mirror of
https://github.com/skot/ESP-Miner.git
synced 2025-03-26 09:41:43 +01:00
7dcb69ebdc
* initial changes for the gammaturbo bringup * added preliminary TPS546 changes * added preliminary EMC2103 support * ASIC temp seems to be maybe working. * magically now fan seems to have the right polarity * added in ideality and beta constants (currently unused). Fixed EMC2103_get_fan_speed() * abstract fan and ASIC temp into thermal functions * abstracted voltage regulator specifics out of tasks and into power.c and vcore.c functions * add TPS546 support for multiple models * move TPS40305/DS4432U vout setter to DS4432U.c * move all ASIC specific functions to asic.c * bad device_model nvs handling * remove old code * add workaround for TPS546 VIN_UV_WARN_LIMIT silicon bug.
130 lines
4.5 KiB
C
130 lines
4.5 KiB
C
#ifndef TPS546_H_
|
|
#define TPS546_H_
|
|
|
|
#include <stdint.h>
|
|
#include <esp_err.h>
|
|
|
|
#define TPS546_I2CADDR 0x24 //< TPS546 i2c address
|
|
#define TPS546_MANUFACTURER_ID 0xFE //< Manufacturer ID
|
|
#define TPS546_REVISION 0xFF //< Chip revision
|
|
|
|
/*-------------------------*/
|
|
/* These are the inital values for the voltage regulator configuration */
|
|
/* when the config revision stored in the TPS546 doesn't match, these values are used */
|
|
|
|
|
|
#define TPS546_INIT_ON_OFF_CONFIG 0x18 /* use ON_OFF command to control power */
|
|
#define OPERATION_OFF 0x00
|
|
#define OPERATION_ON 0x80
|
|
|
|
#define TPS546_INIT_PHASE 0x00 /* phase */
|
|
|
|
#define TPS546_INIT_FREQUENCY 650 /* KHz */
|
|
|
|
typedef struct
|
|
{
|
|
/* vin voltage */
|
|
float TPS546_INIT_VIN_ON; /* V */
|
|
float TPS546_INIT_VIN_OFF; /* V */
|
|
float TPS546_INIT_VIN_UV_WARN_LIMIT; /* V */
|
|
float TPS546_INIT_VIN_OV_FAULT_LIMIT; /* V */
|
|
/* vout voltage */
|
|
float TPS546_INIT_SCALE_LOOP; /* Voltage Scale factor */
|
|
float TPS546_INIT_VOUT_MIN; /* V */
|
|
float TPS546_INIT_VOUT_MAX; /* V */
|
|
float TPS546_INIT_VOUT_COMMAND; /* V absolute value */
|
|
/* iout current */
|
|
float TPS546_INIT_IOUT_OC_WARN_LIMIT; /* A */
|
|
float TPS546_INIT_IOUT_OC_FAULT_LIMIT; /* A */
|
|
} TPS546_CONFIG;
|
|
|
|
/* vin voltage */
|
|
// #define TPS546_INIT_VIN_ON 11.0 /* V */
|
|
// #define TPS546_INIT_VIN_OFF 10.5 /* V */
|
|
// #define TPS546_INIT_VIN_UV_WARN_LIMIT 14.0 /* V */
|
|
// #define TPS546_INIT_VIN_OV_FAULT_LIMIT 15.0 /* V */
|
|
#define TPS546_INIT_VIN_OV_FAULT_RESPONSE 0xB7 /* retry 6 times */
|
|
|
|
/* vout voltage */
|
|
//#define TPS546_INIT_SCALE_LOOP 0.25 /* Voltage Scale factor */
|
|
//#define TPS546_INIT_VOUT_MAX 3 /* V */
|
|
#define TPS546_INIT_VOUT_OV_FAULT_LIMIT 1.25 /* %/100 above VOUT_COMMAND */
|
|
#define TPS546_INIT_VOUT_OV_WARN_LIMIT 1.1 /* %/100 above VOUT_COMMAND */
|
|
#define TPS546_INIT_VOUT_MARGIN_HIGH 1.1 /* %/100 above VOUT */
|
|
//#define TPS546_INIT_VOUT_COMMAND 1.2 /* V absolute value */
|
|
#define TPS546_INIT_VOUT_MARGIN_LOW 0.90 /* %/100 below VOUT */
|
|
#define TPS546_INIT_VOUT_UV_WARN_LIMIT 0.90 /* %/100 below VOUT_COMMAND */
|
|
#define TPS546_INIT_VOUT_UV_FAULT_LIMIT 0.75 /* %/100 below VOUT_COMMAND */
|
|
//#define TPS546_INIT_VOUT_MIN 1 /* v */
|
|
|
|
/* iout current */
|
|
// #define TPS546_INIT_IOUT_OC_WARN_LIMIT 50.00 /* A */
|
|
// #define TPS546_INIT_IOUT_OC_FAULT_LIMIT 55.00 /* A */
|
|
#define TPS546_INIT_IOUT_OC_FAULT_RESPONSE 0xC0 /* shut down, no retries */
|
|
|
|
/* temperature */
|
|
// It is better to set the temperature warn limit for TPS546 more higher than Ultra
|
|
#define TPS546_INIT_OT_WARN_LIMIT 105 /* degrees C */
|
|
#define TPS546_INIT_OT_FAULT_LIMIT 145 /* degrees C */
|
|
#define TPS546_INIT_OT_FAULT_RESPONSE 0xFF /* wait for cooling, and retry */
|
|
|
|
/* timing */
|
|
#define TPS546_INIT_TON_DELAY 0
|
|
#define TPS546_INIT_TON_RISE 3
|
|
#define TPS546_INIT_TON_MAX_FAULT_LIMIT 0
|
|
#define TPS546_INIT_TON_MAX_FAULT_RESPONSE 0x3B
|
|
#define TPS546_INIT_TOFF_DELAY 0
|
|
#define TPS546_INIT_TOFF_FALL 0
|
|
|
|
#define INIT_STACK_CONFIG 0x0001 //One-Slave, 2-phase
|
|
#define INIT_SYNC_CONFIG 0x00D0 //Enable Auto Detect SYNC
|
|
#define INIT_PIN_DETECT_OVERRIDE 0xFFFF //use pin values
|
|
|
|
/*-------------------------*/
|
|
|
|
/* PMBUS_ON_OFF_CONFIG initialization values */
|
|
#define ON_OFF_CONFIG_PU 0x10 // turn on PU bit
|
|
#define ON_OFF_CONFIG_CMD 0x08 // turn on CMD bit
|
|
#define ON_OFF_CONFIG_CP 0x00 // turn off CP bit
|
|
#define ON_OFF_CONFIG_POLARITY 0x00 // turn off POLARITY bit
|
|
#define ON_OFF_CONFIG_DELAY 0x00 // turn off DELAY bit
|
|
|
|
//// STATUS_WORD Offsets
|
|
#define TPS546_STATUS_VOUT 0x8000 //bit 15
|
|
#define TPS546_STATUS_IOUT 0x4000
|
|
#define TPS546_STATUS_INPUT 0x2000
|
|
#define TPS546_STATUS_MFR 0x1000
|
|
#define TPS546_STATUS_PGOOD 0x0800
|
|
#define TPS546_STATUS_OTHER 0x0200
|
|
|
|
#define TPS546_STATUS_BUSY 0x0080
|
|
#define TPS546_STATUS_OFF 0x0040
|
|
#define TPS546_STATUS_VOUT_OV 0x0020
|
|
#define TPS546_STATUS_IOUT_OC 0x0010
|
|
#define TPS546_STATUS_VIN_UV 0x0008
|
|
#define TPS546_STATUS_TEMP 0x0004
|
|
#define TPS546_STATUS_CML 0x0002
|
|
#define TPS546_STATUS_NONE 0x0001
|
|
|
|
|
|
/* public functions */
|
|
esp_err_t TPS546_init(TPS546_CONFIG config);
|
|
void TPS546_read_mfr_info(uint8_t *);
|
|
void TPS546_set_mfr_info(void);
|
|
void TPS546_write_entire_config(void);
|
|
int TPS546_get_frequency(void);
|
|
void TPS546_set_frequency(int);
|
|
int TPS546_get_temperature(void);
|
|
float TPS546_get_vin(void);
|
|
float TPS546_get_iout(void);
|
|
float TPS546_get_vout(void);
|
|
esp_err_t TPS546_set_vout(float volts);
|
|
void TPS546_show_voltage_settings(void);
|
|
void TPS546_print_status(void);
|
|
|
|
esp_err_t TPS546_check_status(uint16_t *);
|
|
esp_err_t TPS546_parse_status(uint16_t status);
|
|
esp_err_t TPS546_clear_faults(void);
|
|
|
|
#endif /* TPS546_H_ */
|