GoSungrow/mmHa/climate.txt

action_template template (optional)
A template to render the value received on the action_topic with.

action_topic string (optional)
The MQTT topic to subscribe for changes of the current action. If this is set, the climate graph uses the value received as data source. Valid values: off, heating, cooling, drying, idle, fan.

aux_command_topic string (optional)
The MQTT topic to publish commands to switch auxiliary heat.

aux_state_template template (optional)
A template to render the value received on the aux_state_topic with.

aux_state_topic string (optional)
The MQTT topic to subscribe for changes of the auxiliary heat mode. If this is not set, the auxiliary heat mode works in optimistic mode (see below).

availability list (optional)
A list of MQTT topics subscribed to receive availability (online/offline) updates. Must not be used together with availability_topic.

payload_available string (optional, default: online)
The payload that represents the available state.

payload_not_available string (optional, default: offline)
The payload that represents the unavailable state.

topic string REQUIRED
An MQTT topic subscribed to receive availability (online/offline) updates.

value_template template (optional)
Defines a template to extract device’s availability from the topic. To determine the devices’s availability result of this template will be compared to payload_available and payload_not_available.

availability_mode string (optional, default: latest)
When availability is configured, this controls the conditions needed to set the entity to available. Valid entries are all, any, and latest. If set to all, payload_available must be received on all configured availability topics before the entity is marked as online. If set to any, payload_available must be received on at least one configured availability topic before the entity is marked as online. If set to latest, the last payload_available or payload_not_available received on any configured availability topic controls the availability.

availability_template template (optional)
Defines a template to extract device’s availability from the availability_topic. To determine the devices’s availability result of this template will be compared to payload_available and payload_not_available.

availability_topic string (optional)
The MQTT topic subscribed to receive availability (online/offline) updates. Must not be used together with availability.

current_temperature_template template (optional)
A template with which the value received on current_temperature_topic will be rendered.

current_temperature_topic string (optional)
The MQTT topic on which to listen for the current temperature.

device map (optional)
Information about the device this HVAC device is a part of to tie it into the device registry. Only works through MQTT discovery and when unique_id is set. At least one of identifiers or connections must be present to identify the device.

configuration_url string (optional)
A link to the webpage that can manage the configuration of this device. Can be either an HTTP or HTTPS link.

connections list (optional)
A list of connections of the device to the outside world as a list of tuples [connection_type, connection_identifier]. For example the MAC address of a network interface: "connections": [["mac", "02:5b:26:a8:dc:12"]].

hw_version string (optional)
The hardware version of the device.

identifiers list | string (optional)
A list of IDs that uniquely identify the device. For example a serial number.

manufacturer string (optional)
The manufacturer of the device.

model string (optional)
The model of the device.

name string (optional)
The name of the device.

suggested_area string (optional)
Suggest an area if the device isn’t in one yet.

sw_version string (optional)
The firmware version of the device.

via_device string (optional)
Identifier of a device that routes messages between this device and Home Assistant. Examples of such devices are hubs, or parent devices of a sub-device. This is used to show device topology in Home Assistant.

enabled_by_default boolean (optional, default: true)
Flag which defines if the entity should be enabled when first added.

encoding string (optional, default: utf-8)
The encoding of the payloads received and published messages. Set to "" to disable decoding of incoming payload.

entity_category string (optional, default: None)
The category of the entity.

fan_mode_command_template template (optional)
A template to render the value sent to the fan_mode_command_topic with.

fan_mode_command_topic string (optional)
The MQTT topic to publish commands to change the fan mode.

fan_mode_state_template template (optional)
A template to render the value received on the fan_mode_state_topic with.

fan_mode_state_topic string (optional)
The MQTT topic to subscribe for changes of the HVAC fan mode. If this is not set, the fan mode works in optimistic mode (see below).

fan_modes list (optional)
A list of supported fan modes.

Default: [“auto”, “low”, “medium”, “high”]
initial integer (optional, default: 21)
Set the initial target temperature.

icon icon (optional)
Icon for the entity.

json_attributes_template template (optional)
Defines a template to extract the JSON dictionary from messages received on the json_attributes_topic. Usage example can be found in MQTT sensor documentation.

json_attributes_topic string (optional)
The MQTT topic subscribed to receive a JSON dictionary payload and then set as sensor attributes. Usage example can be found in MQTT sensor documentation.

max_temp float (optional)
Maximum set point available.

min_temp float (optional)
Minimum set point available.

mode_command_template template (optional)
A template to render the value sent to the mode_command_topic with.

mode_command_topic string (optional)
The MQTT topic to publish commands to change the HVAC operation mode.

mode_state_template template (optional)
A template to render the value received on the mode_state_topic with.

mode_state_topic string (optional)
The MQTT topic to subscribe for changes of the HVAC operation mode. If this is not set, the operation mode works in optimistic mode (see below).

modes list (optional)
A list of supported modes. Needs to be a subset of the default values.

Default: [“auto”, “off”, “cool”, “heat”, “dry”, “fan_only”]
name string (optional, default: MQTT HVAC)
The name of the HVAC.

object_id string (optional)
Used instead of name for automatic generation of entity_id

payload_available string (optional, default: online)
The payload that represents the available state.

payload_not_available string (optional, default: offline)
The payload that represents the unavailable state.

payload_off string (optional, default: OFF)
The payload that represents disabled state.

payload_on string (optional, default: ON)
The payload that represents enabled state.

power_command_topic string (optional)
The MQTT topic to publish commands to change the power state. This is useful if your device has a separate power toggle in addition to mode.

precision float (optional)
The desired precision for this device. Can be used to match your actual thermostat’s precision. Supported values are 0.1, 0.5 and 1.0.

Default: 0.1 for Celsius and 1.0 for Fahrenheit.
preset_mode_command_template template (optional)
Defines a template to generate the payload to send to preset_mode_command_topic.

preset_mode_command_topic string (optional)
The MQTT topic to publish commands to change the preset mode.

preset_mode_state_topic string (optional)
The MQTT topic subscribed to receive climate speed based on presets. When preset ‘none’ is received or None the preset_mode will be reset.

preset_mode_value_template string (optional)
Defines a template to extract the preset_mode value from the payload received on preset_mode_state_topic.

preset_modes list (optional, default: [])
List of preset modes this climate is supporting. Common examples include eco, away, boost, comfort, home, sleep and activity.

qos integer (optional, default: 0)
The maximum QoS level to be used when receiving and publishing messages.

retain boolean (optional, default: false)
Defines if published messages should have the retain flag set.

swing_mode_command_template template (optional)
A template to render the value sent to the swing_mode_command_topic with.

swing_mode_command_topic string (optional)
The MQTT topic to publish commands to change the swing mode.

swing_mode_state_template template (optional)
A template to render the value received on the swing_mode_state_topic with.

swing_mode_state_topic string (optional)
The MQTT topic to subscribe for changes of the HVAC swing mode. If this is not set, the swing mode works in optimistic mode (see below).

swing_modes list (optional, default: [“on”, “off”])
A list of supported swing modes.

temperature_command_template template (optional)
A template to render the value sent to the temperature_command_topic with.

temperature_command_topic string (optional)
The MQTT topic to publish commands to change the target temperature.

temperature_high_command_template template (optional)
A template to render the value sent to the temperature_high_command_topic with.

temperature_high_command_topic string (optional)
The MQTT topic to publish commands to change the high target temperature.

temperature_high_state_template template (optional)
A template to render the value received on the temperature_high_state_topic with.

temperature_high_state_topic string (optional)
The MQTT topic to subscribe for changes in the target high temperature. If this is not set, the target high temperature works in optimistic mode (see below).

temperature_low_command_template template (optional)
A template to render the value sent to the temperature_low_command_topic with.

temperature_low_command_topic string (optional)
The MQTT topic to publish commands to change the target low temperature.

temperature_low_state_template template (optional)
A template to render the value received on the temperature_low_state_topic with.

temperature_low_state_topic string (optional)
The MQTT topic to subscribe for changes in the target low temperature. If this is not set, the target low temperature works in optimistic mode (see below).

temperature_state_template template (optional)
A template to render the value received on the temperature_state_topic with.

temperature_state_topic string (optional)
The MQTT topic to subscribe for changes in the target temperature. If this is not set, the target temperature works in optimistic mode (see below).

temperature_unit string (optional)
Defines the temperature unit of the device, C or F. If this is not set, the temperature unit is set to the system temperature unit.

temp_step float (optional, default: 1)
Step size for temperature set point.

unique_id string (optional)
An ID that uniquely identifies this HVAC device. If two HVAC devices have the same unique ID, Home Assistant will raise an exception.

value_template template (optional)
Default template to render the payloads on all *_state_topics with.