Skot Croshere b81fe82b2d added some (poor) 3D models for the buttons

2023-10-19 11:33:34 -04:00

..

2R5TPE220MAFB.step

schematic done, all footprints added, 3D files added. Rough placement done. needs lots of routing.

2022-11-22 22:05:40 -05:00

21-0164B_L622-1_MXM.step

routed the bitaxe!

2022-03-04 22:17:39 -08:00

470531000.stp

updated the fan connector for #21

2023-01-26 23:53:25 -05:00

Bitaxe_Heatsink.step

added barrel jack and heatsink 3d file

2023-09-05 23:03:42 -04:00

c-63862-1-r-3d.stp

added VIN spade connectors for #6. moved the 5V pinheader around the corner. fixed the part numbers on R19-R22. Switched to in-stock LDOs for IC4 and IC5

2022-06-10 18:10:28 -07:00

Cree_PLCC6.stp

cleaned up silkscreen. added some screenshots

2022-11-30 19:18:34 -05:00

CUI_DEVICES_PJ-002AH.step

added barrel jack and heatsink 3d file

2023-09-05 23:03:42 -04:00

CUI_DEVICES_PJ-037AH.step

Changed barrel plug to 2 pin, added JST-XH connector

2023-10-01 18:07:44 -04:00

CX3225SB16000H0FLJCC.STEP

switched out some OOS parts, generated BOM

2022-10-04 16:17:22 -04:00

DISST7789-176x320.STEP

fixed up USB-C wiring. added CC pulldown resistors. added LCD display to play with

2023-09-11 00:54:03 -04:00

DQG0008A.stp

schematic done, all footprints added, 3D files added. Rough placement done. needs lots of routing.

2022-11-22 22:05:40 -05:00

DQH0008A.stp

schematic done, all footprints added, 3D files added. Rough placement done. needs lots of routing.

2022-11-22 22:05:40 -05:00

DRC0010J.stp

schematic done, all footprints added, 3D files added. Rough placement done. needs lots of routing.

2022-11-22 22:05:40 -05:00

DRL0006A.stp

made separate symbols for BM1397 in mode0 and mode1

2022-06-23 00:25:23 -07:00

ESP32-S3-WROOM-1-N8R2--3DModel-STEP-56544.STEP

lots of signals routed. much better ESP32-S3 3D model

2022-11-30 17:40:28 -05:00

FP1006V2-R.STEP

schematic done, all footprints added, 3D files added. Rough placement done. needs lots of routing.

2022-11-22 22:05:40 -05:00

FTSH-105-01-F-DV-K.stp

switched to the standard 1.27mm pitch 10pin JTAG header

2023-01-30 00:21:30 -05:00

IHLP2020CZ.step

routed the bitaxe!

2022-03-04 22:17:39 -08:00

OLED_0.91_128x32.stp

moved R4 back to it's original position so I can avoid a new stencil. added OLED 3D model.

2023-10-19 11:01:05 -04:00

PLCC6_LED_3_5X3_4X2_8_CRW.step

added status LEDs, GPIOs, and a bigger 3V3 LDO

2022-11-28 10:28:48 -05:00

SMV_z90.stp

added VIN spade connectors for #6. moved the 5V pinheader around the corner. fixed the part numbers on R19-R22. Switched to in-stock LDOs for IC4 and IC5

2022-06-10 18:10:28 -07:00

SN74AXC1T45DBVR.STEP

added SN74AXC1T45 for the ESP32 clocking the BM1397 idea.

2022-11-27 13:01:52 -05:00

SOT-23-5_M5_MCH.step

routed the bitaxe!

2022-03-04 22:17:39 -08:00

ST-4ETB2k_(202).stp

schematic done, all footprints added, 3D files added. Rough placement done. needs lots of routing.

2022-11-22 22:05:40 -05:00

SW_CS1213AGF260_CRS.step

added some (poor) 3D models for the buttons

2023-10-19 11:33:34 -04:00

TSOT-23-5_RIT.step

added status LEDs, GPIOs, and a bigger 3V3 LDO

2022-11-28 10:28:48 -05:00

TXB0104RGYR.STEP

added almost all of the feedback from NebulaMiner

2022-11-25 19:44:24 -05:00

USB_10118193-0001LF.STEP

added USB port and EN/BOOT buttons. placed and routed

2023-07-11 00:01:52 -04:00

XRCGB27M120F3M10R0_MUR.step

routed the bitaxe!

2022-03-04 22:17:39 -08:00

XTAL_SC32S-7PF20PPM_EPS.step

added 32kHz crystal for #23

2023-01-26 22:45:13 -05:00