avcodec/libsvtav1: update some options and defaults

And bump the minimum required version to 0.9.0

Signed-off-by: James Almer <jamrial@gmail.com>

configure

@@ -6595,7 +6595,7 @@ enabled libsoxr           && require libsoxr soxr.h soxr_create -lsoxr
 enabled libssh            && require_pkg_config libssh libssh libssh/sftp.h sftp_init
 enabled libspeex          && require_pkg_config libspeex speex speex/speex.h speex_decoder_init
 enabled libsrt            && require_pkg_config libsrt "srt >= 1.3.0" srt/srt.h srt_socket
-enabled libsvtav1         && require_pkg_config libsvtav1 "SvtAv1Enc >= 0.8.4" EbSvtAv1Enc.h svt_av1_enc_init_handle
+enabled libsvtav1         && require_pkg_config libsvtav1 "SvtAv1Enc >= 0.9.0" EbSvtAv1Enc.h svt_av1_enc_init_handle
 enabled libtensorflow     && require libtensorflow tensorflow/c/c_api.h TF_Version -ltensorflow
 enabled libtesseract      && require_pkg_config libtesseract tesseract tesseract/capi.h TessBaseAPICreate
 enabled libtheora         && require libtheora theora/theoraenc.h th_info_init -ltheoraenc -ltheoradec -logg

doc/encoders.texi

@@ -1775,28 +1775,15 @@ This is the default.
 @item high
 @end table
 
-@item rc
-Set the rate control mode to use.
-
-Possible modes:
-@table @option
-@item cqp
-Constant quantizer: use fixed values of qindex (dependent on the frame type)
-throughout the stream.  This mode is the default.
-
-@item vbr
-Variable bitrate: use a target bitrate for the whole stream.
-
-@item cvbr
-Constrained variable bitrate: use a target bitrate for each GOP.
-@end table
-
 @item qmax
 Set the maximum quantizer to use when using a bitrate mode.
 
 @item qmin
 Set the minimum quantizer to use when using a bitrate mode.
 
+@item crf
+Constant rate factor value used in crf rate control mode (0-63).
+
 @item qp
 Set the quantizer used in cqp rate control mode (0-63).
 
@@ -1807,8 +1794,8 @@ Enable scene change detection.
 Set number of frames to look ahead (0-120).
 
 @item preset
-Set the quality-speed tradeoff, in the range 0 to 8.  Higher values are
+Set the quality-speed tradeoff, in the range 0 to 13.  Higher values are
-faster but lower quality.  Defaults to 8 (highest speed).
+faster but lower quality.
 
 @item tile_rows
 Set log2 of the number of rows of tiles to use (0-6).

libavcodec/libsvtav1.c

@@ -68,7 +68,7 @@ typedef struct SvtContext {
     int hierarchical_level;
     int la_depth;
     int enc_mode;
-    int rc_mode;
+    int crf;
     int scd;
     int qp;
 
@@ -160,11 +160,32 @@ static int config_enc_params(EbSvtAv1EncConfiguration *param,
 
     // Update param from options
     param->hierarchical_levels      = svt_enc->hierarchical_level;
-    param->enc_mode                 = svt_enc->enc_mode;
+
+    if (svt_enc->enc_mode >= 0)
+        param->enc_mode             = svt_enc->enc_mode;
+
     param->tier                     = svt_enc->tier;
-    param->rate_control_mode        = svt_enc->rc_mode;
+
+    if (avctx->bit_rate) {
+        param->target_bit_rate      = avctx->bit_rate;
+        if (avctx->rc_max_rate != avctx->bit_rate)
+            param->rate_control_mode = 1;
+        else
+            param->rate_control_mode = 2;
+    }
+    param->max_bit_rate             = avctx->rc_max_rate;
+    param->vbv_bufsize              = avctx->rc_buffer_size;
+
+    if (svt_enc->crf > 0) {
+        param->qp                   = svt_enc->crf;
+        param->rate_control_mode    = 0;
+        param->enable_tpl_la        = 1;
+    } else if (svt_enc->qp > 0) {
+        param->qp                   = svt_enc->qp;
+        param->rate_control_mode    = 0;
+        param->enable_tpl_la        = 0;
+    }
     param->scene_change_detection   = svt_enc->scd;
-    param->qp                       = svt_enc->qp;
 
     if (svt_enc->la_depth >= 0)
         param->look_ahead_distance  = svt_enc->la_depth;
@@ -224,8 +245,6 @@ static int config_enc_params(EbSvtAv1EncConfiguration *param,
         param->profile = FF_PROFILE_AV1_HIGH;
     }
 
-    param->target_bit_rate          = avctx->bit_rate;
-
     if (avctx->gop_size > 0)
         param->intra_period_length  = avctx->gop_size - 1;
 
@@ -237,8 +256,8 @@ static int config_enc_params(EbSvtAv1EncConfiguration *param,
         param->frame_rate_denominator = avctx->time_base.num * avctx->ticks_per_frame;
     }
 
-    param->enable_tpl_la = !!param->rate_control_mode;
+    avctx->bit_rate                 = param->target_bit_rate;
-    if (param->rate_control_mode) {
+    if (avctx->bit_rate) {
         param->max_qp_allowed       = avctx->qmax;
         param->min_qp_allowed       = avctx->qmin;
     }
@@ -508,8 +527,8 @@ static const AVOption options[] = {
     { "la_depth", "Look ahead distance [0, 120]", OFFSET(la_depth),
       AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 120, VE },
 
-    { "preset", "Encoding preset [0, 8]",
+    { "preset", "Encoding preset",
-      OFFSET(enc_mode), AV_OPT_TYPE_INT, { .i64 = MAX_ENC_PRESET }, 0, MAX_ENC_PRESET, VE },
+      OFFSET(enc_mode), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, MAX_ENC_PRESET, VE },
 
     { "tier", "Set operating point tier", OFFSET(tier),
       AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 1, VE, "tier" },
@@ -546,14 +565,10 @@ static const AVOption options[] = {
         { LEVEL("7.3", 73) },
 #undef LEVEL
 
-    { "rc", "Bit rate control mode", OFFSET(rc_mode),
+    { "crf", "Constant Rate Factor value", OFFSET(crf),
-      AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 2, VE , "rc"},
+      AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 63, VE },
-        { "cqp", "Constant quantizer", 0, AV_OPT_TYPE_CONST, { .i64 = 0 },  INT_MIN, INT_MAX, VE, "rc" },
+    { "qp", "Initial Quantizer level value", OFFSET(qp),
-        { "vbr", "Variable Bit Rate, use a target bitrate for the entire stream", 0, AV_OPT_TYPE_CONST, { .i64 = 1 },  INT_MIN, INT_MAX, VE, "rc" },
+      AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 63, VE },
-        { "cvbr", "Constrained Variable Bit Rate, use a target bitrate for each GOP", 0, AV_OPT_TYPE_CONST,{ .i64 = 2 },  INT_MIN, INT_MAX, VE, "rc" },
-
-    { "qp", "Quantizer to use with cqp rate control mode", OFFSET(qp),
-      AV_OPT_TYPE_INT, { .i64 = 50 }, 0, 63, VE },
 
     { "sc_detection", "Scene change detection", OFFSET(scd),
       AV_OPT_TYPE_BOOL, { .i64 = 0 }, 0, 1, VE },
@@ -574,10 +589,10 @@ static const AVClass class = {
 };
 
 static const AVCodecDefault eb_enc_defaults[] = {
-    { "b",         "7M"    },
+    { "b",         "0"    },
     { "flags",     "+cgop" },
     { "g",         "-1"    },
-    { "qmin",      "0"     },
+    { "qmin",      "1"     },
     { "qmax",      "63"    },
     { NULL },
 };