avfilter: add erosion, dilation, deflate & inflate filter

Signed-off-by: Paul B Mahol <onemda@gmail.com>

Changelog

@@ -16,6 +16,7 @@ version <next>:
 - removegrain video filter
 - Intel QSV-accelerated MPEG-2 video and HEVC encoding
 - libkvazaar HEVC encoder
+- erosion, dilation, deflate and inflate video filters
 
 
 version 2.7:

doc/filters.texi

@@ -3718,6 +3718,24 @@ Set whether or not chroma is considered in the metric calculations. Default is
 @code{1}.
 @end table
 
+@section deflate
+
+Apply deflate effect to the video.
+
+This filter replaces the pixel by the local(3x3) average by taking into account
+only values lower than the pixel.
+
+It accepts the following options:
+
+@table @option
+@item threshold0
+@item threshold1
+@item threshold2
+@item threshold3
+Allows to limit the maximum change for each plane, default is 65535.
+If 0, plane will remain unchanged.
+@end table
+
 @section dejudder
 
 Remove judder produced by partially interlaced telecined content.
@@ -3904,6 +3922,33 @@ A number representing position of the first frame with respect to the telecine
 pattern. This is to be used if the stream is cut. The default value is @code{0}.
 @end table
 
+@section dilation
+
+Apply dilation effect to the video.
+
+This filter replaces the pixel by the local(3x3) maximum.
+
+It accepts the following options:
+
+@table @option
+@item threshold0
+@item threshold1
+@item threshold2
+@item threshold3
+Allows to limit the maximum change for each plane, default is 65535.
+If 0, plane will remain unchanged.
+
+@item coordinates
+Flag which specifies the pixel to refer to. Default is 255 i.e. all eight
+pixels are used.
+
+Flags to local 3x3 coordinates maps like this:
+
+    1 2 3
+    4   5
+    6 7 8
+@end table
+
 @section drawbox
 
 Draw a colored box on the input image.
@@ -4759,6 +4804,33 @@ value.
 
 @end table
 
+@section erosion
+
+Apply erosion effect to the video.
+
+This filter replaces the pixel by the local(3x3) minimum.
+
+It accepts the following options:
+
+@table @option
+@item threshold0
+@item threshold1
+@item threshold2
+@item threshold3
+Allows to limit the maximum change for each plane, default is 65535.
+If 0, plane will remain unchanged.
+
+@item coordinates
+Flag which specifies the pixel to refer to. Default is 255 i.e. all eight
+pixels are used.
+
+Flags to local 3x3 coordinates maps like this:
+
+    1 2 3
+    4   5
+    6 7 8
+@end table
+
 @section extractplanes
 
 Extract color channel components from input video stream into
@@ -6356,6 +6428,24 @@ Default value is @code{none}.
 Swap luma/chroma/alpha fields. Exchange even & odd lines. Default value is @code{0}.
 @end table
 
+@section inflate
+
+Apply inflate effect to the video.
+
+This filter replaces the pixel by the local(3x3) average by taking into account
+only values higher than the pixel.
+
+It accepts the following options:
+
+@table @option
+@item threshold0
+@item threshold1
+@item threshold2
+@item threshold3
+Allows to limit the maximum change for each plane, default is 65535.
+If 0, plane will remain unchanged.
+@end table
+
 @section interlace
 
 Simple interlacing filter from progressive contents. This interleaves upper (or

libavfilter/Makefile

@@ -112,10 +112,12 @@ OBJS-$(CONFIG_CROPDETECT_FILTER)             += vf_cropdetect.o
 OBJS-$(CONFIG_CURVES_FILTER)                 += vf_curves.o
 OBJS-$(CONFIG_DCTDNOIZ_FILTER)               += vf_dctdnoiz.o
 OBJS-$(CONFIG_DECIMATE_FILTER)               += vf_decimate.o
+OBJS-$(CONFIG_DEFLATE_FILTER)                += vf_neighbor.o
 OBJS-$(CONFIG_DEJUDDER_FILTER)               += vf_dejudder.o
 OBJS-$(CONFIG_DELOGO_FILTER)                 += vf_delogo.o
 OBJS-$(CONFIG_DESHAKE_FILTER)                += vf_deshake.o
 OBJS-$(CONFIG_DETELECINE_FILTER)             += vf_detelecine.o
+OBJS-$(CONFIG_DILATION_FILTER)               += vf_neighbor.o
 OBJS-$(CONFIG_DRAWBOX_FILTER)                += vf_drawbox.o
 OBJS-$(CONFIG_DRAWGRAPH_FILTER)              += f_drawgraph.o
 OBJS-$(CONFIG_DRAWGRID_FILTER)               += vf_drawbox.o
@@ -123,6 +125,7 @@ OBJS-$(CONFIG_DRAWTEXT_FILTER)               += vf_drawtext.o
 OBJS-$(CONFIG_ELBG_FILTER)                   += vf_elbg.o
 OBJS-$(CONFIG_EDGEDETECT_FILTER)             += vf_edgedetect.o
 OBJS-$(CONFIG_EQ_FILTER)                     += vf_eq.o
+OBJS-$(CONFIG_EROSION_FILTER)                += vf_neighbor.o
 OBJS-$(CONFIG_EXTRACTPLANES_FILTER)          += vf_extractplanes.o
 OBJS-$(CONFIG_FADE_FILTER)                   += vf_fade.o
 OBJS-$(CONFIG_FFTFILT_FILTER)                += vf_fftfilt.o
@@ -147,6 +150,7 @@ OBJS-$(CONFIG_HQX_FILTER)                    += vf_hqx.o
 OBJS-$(CONFIG_HUE_FILTER)                    += vf_hue.o
 OBJS-$(CONFIG_IDET_FILTER)                   += vf_idet.o
 OBJS-$(CONFIG_IL_FILTER)                     += vf_il.o
+OBJS-$(CONFIG_INFLATE_FILTER)                += vf_neighbor.o
 OBJS-$(CONFIG_INTERLACE_FILTER)              += vf_interlace.o
 OBJS-$(CONFIG_INTERLEAVE_FILTER)             += f_interleave.o
 OBJS-$(CONFIG_KERNDEINT_FILTER)              += vf_kerndeint.o

libavfilter/allfilters.c

@@ -128,10 +128,12 @@ void avfilter_register_all(void)
     REGISTER_FILTER(CURVES,         curves,         vf);
     REGISTER_FILTER(DCTDNOIZ,       dctdnoiz,       vf);
     REGISTER_FILTER(DECIMATE,       decimate,       vf);
+    REGISTER_FILTER(DEFLATE,        deflate,        vf);
     REGISTER_FILTER(DEJUDDER,       dejudder,       vf);
     REGISTER_FILTER(DELOGO,         delogo,         vf);
     REGISTER_FILTER(DESHAKE,        deshake,        vf);
     REGISTER_FILTER(DETELECINE,     detelecine,     vf);
+    REGISTER_FILTER(DILATION,       dilation,       vf);
     REGISTER_FILTER(DRAWBOX,        drawbox,        vf);
     REGISTER_FILTER(DRAWGRAPH,      drawgraph,      vf);
     REGISTER_FILTER(DRAWGRID,       drawgrid,       vf);
@@ -139,6 +141,7 @@ void avfilter_register_all(void)
     REGISTER_FILTER(EDGEDETECT,     edgedetect,     vf);
     REGISTER_FILTER(ELBG,           elbg,           vf);
     REGISTER_FILTER(EQ,             eq,             vf);
+    REGISTER_FILTER(EROSION,        erosion,        vf);
     REGISTER_FILTER(EXTRACTPLANES,  extractplanes,  vf);
     REGISTER_FILTER(FADE,           fade,           vf);
     REGISTER_FILTER(FFTFILT,        fftfilt,        vf);
@@ -163,6 +166,7 @@ void avfilter_register_all(void)
     REGISTER_FILTER(HUE,            hue,            vf);
     REGISTER_FILTER(IDET,           idet,           vf);
     REGISTER_FILTER(IL,             il,             vf);
+    REGISTER_FILTER(INFLATE,        inflate,        vf);
     REGISTER_FILTER(INTERLACE,      interlace,      vf);
     REGISTER_FILTER(INTERLEAVE,     interleave,     vf);
     REGISTER_FILTER(KERNDEINT,      kerndeint,      vf);

libavfilter/version.h

@@ -30,7 +30,7 @@
 #include "libavutil/version.h"
 
 #define LIBAVFILTER_VERSION_MAJOR  5
-#define LIBAVFILTER_VERSION_MINOR  21
+#define LIBAVFILTER_VERSION_MINOR  22
 #define LIBAVFILTER_VERSION_MICRO 100
 
 #define LIBAVFILTER_VERSION_INT AV_VERSION_INT(LIBAVFILTER_VERSION_MAJOR, \

libavfilter/vf_neighbor.c

@@ -0,0 +1,324 @@
+/*
+ * Copyright (c) 2012-2013 Oka Motofumi (chikuzen.mo at gmail dot com)
+ * Copyright (c) 2015 Paul B Mahol
+ *
+ * This file is part of FFmpeg.
+ *
+ * FFmpeg is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * FFmpeg is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with FFmpeg; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "libavutil/imgutils.h"
+#include "libavutil/pixdesc.h"
+#include "libavutil/opt.h"
+#include "avfilter.h"
+#include "formats.h"
+#include "internal.h"
+#include "video.h"
+
+typedef struct NContext {
+    const AVClass *class;
+    int planeheight[4];
+    int planewidth[4];
+    int nb_planes;
+    int threshold[4];
+    int coordinates;
+    uint8_t *buffer;
+
+    void (*filter)(uint8_t *dst, const uint8_t *p1, int width,
+                   int threshold, const uint8_t *coordinates[], int coord);
+} NContext;
+
+static int query_formats(AVFilterContext *ctx)
+{
+    static const enum AVPixelFormat pix_fmts[] = {
+        AV_PIX_FMT_YUVA444P, AV_PIX_FMT_YUVA422P, AV_PIX_FMT_YUVA420P,
+        AV_PIX_FMT_YUVJ444P, AV_PIX_FMT_YUVJ440P, AV_PIX_FMT_YUVJ422P,AV_PIX_FMT_YUVJ420P, AV_PIX_FMT_YUVJ411P,
+        AV_PIX_FMT_YUV444P, AV_PIX_FMT_YUV440P, AV_PIX_FMT_YUV422P, AV_PIX_FMT_YUV420P, AV_PIX_FMT_YUV411P, AV_PIX_FMT_YUV410P,
+        AV_PIX_FMT_GBRP, AV_PIX_FMT_GBRAP, AV_PIX_FMT_GRAY8, AV_PIX_FMT_NONE
+    };
+
+    ff_set_common_formats(ctx, ff_make_format_list(pix_fmts));
+    return 0;
+}
+
+static av_cold void uninit(AVFilterContext *ctx)
+{
+    NContext *s = ctx->priv;
+
+    av_freep(&s->buffer);
+}
+
+static inline void line_copy8(uint8_t *line, const uint8_t *srcp, int width, int mergin)
+{
+    int i;
+
+    memcpy(line, srcp, width);
+
+    for (i = mergin; i > 0; i--) {
+        line[-i] = line[i];
+        line[width - 1 + i] = line[width - 1 - i];
+    }
+}
+
+static void erosion(uint8_t *dst, const uint8_t *p1, int width,
+                    int threshold, const uint8_t *coordinates[], int coord)
+{
+    int x, i;
+
+    for (x = 0; x < width; x++) {
+        int min = p1[x];
+        int limit = FFMAX(min - threshold, 0);
+
+        for (i = 0; i < 8; i++) {
+            if (coord & (1 << i)) {
+                min = FFMIN(min, *(coordinates[i] + x));
+            }
+            min = FFMAX(min, limit);
+        }
+
+        dst[x] = min;
+    }
+}
+
+static void dilation(uint8_t *dst, const uint8_t *p1, int width,
+                     int threshold, const uint8_t *coordinates[], int coord)
+{
+    int x, i;
+
+    for (x = 0; x < width; x++) {
+        int max = p1[x];
+        int limit = FFMIN(max + threshold, 255);
+
+        for (i = 0; i < 8; i++) {
+            if (coord & (1 << i)) {
+                max = FFMAX(max, *(coordinates[i] + x));
+            }
+            max = FFMIN(max, limit);
+        }
+
+        dst[x] = max;
+    }
+}
+
+static void deflate(uint8_t *dst, const uint8_t *p1, int width,
+                    int threshold, const uint8_t *coordinates[], int coord)
+{
+    int x, i;
+
+    for (x = 0; x < width; x++) {
+        int sum = 0;
+        int limit = FFMAX(p1[x] - threshold, 0);
+
+        for (i = 0; i < 8; sum += *(coordinates[i++] + x));
+
+        dst[x] = FFMAX(FFMIN(sum / 8, p1[x]), limit);
+    }
+}
+
+static void inflate(uint8_t *dst, const uint8_t *p1, int width,
+                    int threshold, const uint8_t *coordinates[], int coord)
+{
+    int x, i;
+
+    for (x = 0; x < width; x++) {
+        int sum = 0;
+        int limit = FFMIN(p1[x] + threshold, 255);
+
+        for (i = 0; i < 8; sum += *(coordinates[i++] + x));
+
+        dst[x] = FFMIN(FFMAX(sum / 8, p1[x]), limit);
+    }
+}
+
+static int config_input(AVFilterLink *inlink)
+{
+    AVFilterContext *ctx = inlink->dst;
+    NContext *s = ctx->priv;
+    const AVPixFmtDescriptor *desc = av_pix_fmt_desc_get(inlink->format);
+    int ret;
+
+    if ((ret = av_image_fill_linesizes(s->planewidth, inlink->format, inlink->w)) < 0)
+        return ret;
+
+    s->planeheight[1] = s->planeheight[2] = FF_CEIL_RSHIFT(inlink->h, desc->log2_chroma_h);
+    s->planeheight[0] = s->planeheight[3] = inlink->h;
+
+    s->nb_planes = av_pix_fmt_count_planes(inlink->format);
+    s->buffer = av_malloc(3 * (s->planewidth[0] + 32));
+    if (!s->buffer)
+        return AVERROR(ENOMEM);
+
+    if (!strcmp(ctx->filter->name, "erosion"))
+        s->filter = erosion;
+    else if (!strcmp(ctx->filter->name, "dilation"))
+        s->filter = dilation;
+    else if (!strcmp(ctx->filter->name, "deflate"))
+        s->filter = deflate;
+    else if (!strcmp(ctx->filter->name, "inflate"))
+        s->filter = inflate;
+
+    return 0;
+}
+
+static int filter_frame(AVFilterLink *inlink, AVFrame *in)
+{
+    AVFilterContext *ctx = inlink->dst;
+    AVFilterLink *outlink = ctx->outputs[0];
+    NContext *s = ctx->priv;
+    AVFrame *out;
+    int plane, y;
+
+    out = ff_get_video_buffer(outlink, outlink->w, outlink->h);
+    if (!out) {
+        av_frame_free(&in);
+        return AVERROR(ENOMEM);
+    }
+    av_frame_copy_props(out, in);
+
+    for (plane = 0; plane < s->nb_planes; plane++) {
+        const int threshold = s->threshold[plane];
+
+        if (threshold) {
+            const uint8_t *src = in->data[plane];
+            uint8_t *dst = out->data[plane];
+            int stride = in->linesize[plane];
+            int height = s->planeheight[plane];
+            int width  = s->planewidth[plane];
+            uint8_t *p0 = s->buffer + 16;
+            uint8_t *p1 = p0 + s->planewidth[0];
+            uint8_t *p2 = p1 + s->planewidth[0];
+            uint8_t *orig = p0, *end = p2;
+
+            line_copy8(p0, src + stride, width, 1);
+            line_copy8(p1, src, width, 1);
+
+            for (y = 0; y < height; y++) {
+                const uint8_t *coordinates[] = { p0 - 1, p0, p0 + 1,
+                                                 p1 - 1,     p1 + 1,
+                                                 p2 - 1, p2, p2 + 1};
+                src += stride * (y < height - 1 ? 1 : -1);
+                line_copy8(p2, src, width, 1);
+
+                s->filter(dst, p1, width, threshold, coordinates, s->coordinates);
+
+                p0 = p1;
+                p1 = p2;
+                p2 = (p2 == end) ? orig: p2 + s->planewidth[0];
+                dst += out->linesize[plane];
+            }
+        } else {
+            av_image_copy_plane(out->data[plane], out->linesize[plane],
+                                in->data[plane], in->linesize[plane],
+                                s->planewidth[plane], s->planeheight[plane]);
+        }
+    }
+
+    av_frame_free(&in);
+    return ff_filter_frame(outlink, out);
+}
+
+static const AVFilterPad neighbor_inputs[] = {
+    {
+        .name         = "default",
+        .type         = AVMEDIA_TYPE_VIDEO,
+        .filter_frame = filter_frame,
+        .config_props = config_input,
+    },
+    { NULL }
+};
+
+static const AVFilterPad neighbor_outputs[] = {
+    {
+        .name = "default",
+        .type = AVMEDIA_TYPE_VIDEO,
+    },
+    { NULL }
+};
+
+#define OFFSET(x) offsetof(NContext, x)
+#define FLAGS AV_OPT_FLAG_FILTERING_PARAM|AV_OPT_FLAG_VIDEO_PARAM
+
+#define DEFINE_NEIGHBOR_FILTER(name_, description_)          \
+AVFILTER_DEFINE_CLASS(name_);                                \
+                                                             \
+AVFilter ff_vf_##name_ = {                                   \
+    .name          = #name_,                                 \
+    .description   = NULL_IF_CONFIG_SMALL(description_),     \
+    .priv_size     = sizeof(NContext),                       \
+    .priv_class    = &name_##_class,                         \
+    .uninit        = uninit,                                 \
+    .query_formats = query_formats,                          \
+    .inputs        = neighbor_inputs,                        \
+    .outputs       = neighbor_outputs,                       \
+    .flags         = AVFILTER_FLAG_SUPPORT_TIMELINE_GENERIC, \
+}
+
+#if CONFIG_EROSION_FILTER
+
+static const AVOption erosion_options[] = {
+    { "threshold0",  "set threshold for 1st plane",   OFFSET(threshold[0]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "threshold1",  "set threshold for 2nd plane",   OFFSET(threshold[1]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "threshold2",  "set threshold for 3rd plane",   OFFSET(threshold[2]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "threshold3",  "set threshold for 4th plane",   OFFSET(threshold[3]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "coordinates", "set coordinates",               OFFSET(coordinates),    AV_OPT_TYPE_INT, {.i64=255},   0, 255,   FLAGS },
+    { NULL }
+};
+
+DEFINE_NEIGHBOR_FILTER(erosion, "Apply erosion effect");
+
+#endif /* CONFIG_EROSION_FILTER */
+
+#if CONFIG_DILATION_FILTER
+
+static const AVOption dilation_options[] = {
+    { "threshold0",  "set threshold for 1st plane",   OFFSET(threshold[0]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "threshold1",  "set threshold for 2nd plane",   OFFSET(threshold[1]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "threshold2",  "set threshold for 3rd plane",   OFFSET(threshold[2]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "threshold3",  "set threshold for 4th plane",   OFFSET(threshold[3]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "coordinates", "set coordinates",               OFFSET(coordinates),    AV_OPT_TYPE_INT, {.i64=255},   0, 255,   FLAGS },
+    { NULL }
+};
+
+DEFINE_NEIGHBOR_FILTER(dilation, "Apply dilation effect");
+
+#endif /* CONFIG_DILATION_FILTER */
+
+#if CONFIG_DEFLATE_FILTER
+
+static const AVOption deflate_options[] = {
+    { "threshold0", "set threshold for 1st plane",   OFFSET(threshold[0]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "threshold1", "set threshold for 2nd plane",   OFFSET(threshold[1]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "threshold2", "set threshold for 3rd plane",   OFFSET(threshold[2]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "threshold3", "set threshold for 4th plane",   OFFSET(threshold[3]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { NULL }
+};
+
+DEFINE_NEIGHBOR_FILTER(deflate, "Apply deflate effect");
+
+#endif /* CONFIG_DEFLATE_FILTER */
+
+#if CONFIG_INFLATE_FILTER
+
+static const AVOption inflate_options[] = {
+    { "threshold0", "set threshold for 1st plane",   OFFSET(threshold[0]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "threshold1", "set threshold for 2nd plane",   OFFSET(threshold[1]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "threshold2", "set threshold for 3rd plane",   OFFSET(threshold[2]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { "threshold3", "set threshold for 4th plane",   OFFSET(threshold[3]),   AV_OPT_TYPE_INT, {.i64=65535}, 0, 65535, FLAGS },
+    { NULL }
+};
+
+DEFINE_NEIGHBOR_FILTER(inflate, "Apply inflate effect");
+
+#endif /* CONFIG_INFLATE_FILTER */