ff_read_packet had potential memleaks:
1. If av_packet_make_refcounted fails, it means that the packet is not
refcounted, but it could nevertheless carry side data and therefore
needs to be unreferenced.
2. If putting a packet on a packet list fails, it wasn't unreferenced.
Furthermore, read_frame_internal leaked a packet's (side) data if a
context update was required and failed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
(cherry picked from commit 66d5e43b9909804511a3e1fb65f6f0bbb0264eb3)
A demuxer might have allocated memory while reading the header. If
reading the header was successfull and an error happens before returning
(e.g. when queueing the attached pictures), the read_close function
would have never been called, so that all those allocations would leak.
This commit changes this.
Furthermore, there would be even more memleaks if the error level was
set to AV_EF_EXPLODE in case there is both metadata and id3v2 metadata.
This has been fixed, too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
(cherry picked from commit e2307f4ff197646a7feee0edbcdd2d3262932676)
avformat_find_stream_info() may decode some frames to get stream
information. And when it does this for subtitles, the decoded subtitles
leak.
(Decoding subtitles was added in b1511e00f6fefde6cb31b2e17f7812cfac1c8bd6
for PGS subtitles. When PGS subtitles originate from a container that
exports every segment as a packet of its own, no output will be
generated when decoding a packet, because not enough input is available.
Yet when used with PGS subtitles in the Matroska form a single packet
contains enough data to generate output. Yet said output is not freed,
hence this leak.)
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
(cherry picked from commit d026fef999f7e2491721b3878bea6e6da8b9f92e)
Fixes: signed integer overflow: 2045163756 * 2 cannot be represented in type 'int'
Fixes: Ticket5132
Found-by: tsmith
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit f3d8f517dbc42de8e2f97cc01bf5171bb05fbcc7)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When e2_pts == INT64_MIN and e1_pts >= 0 the calculation of
e2_pts - e1_pts will overflow an int64_t.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit f15007afa90a3eb3639848d9702c1cc3ac3e896b)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 9151595917793558550 + 297519050751678697 cannot be represented in type 'long'
Fixes: 15496/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-5722866475073536
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: division by 0
Fixes: 15480/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-5746727434321920
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit dd06f022b07438d650c82255dff16908ba04244a.
Fixes ticket #7871 and reopens ticket #7816.
The introduced regression caused URL's with @ in them to be parsed incorrectly
which is a bigger issue then not being able to specify the slash character as a
password.
I think there are better ways to fix the original issue, like being able to
specify HTTP username and password as a protocol option, or adding a protocol
option to percent-decode the URL first.
Signed-off-by: Marton Balint <cus@passwd.hu>
This patch improves the logs when the message "cur_dts is invalid" appears.
If helps to identify which stream generates the trouble,
and the status of the stream.
A lot of users suffers with the message, and the origin varies.
The improved message can help to discover the cause.
Signed-off-by: Andreas Hakon <andreas.hakon@protonmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
After this change we always parse the full specifier even if we know the result
in the middle of the parsing. Sligtly slower, but this is needed to
consistently reject incorrect specifiers in both matching and non-matching
cases.
Signed-off-by: Marton Balint <cus@passwd.hu>
This reworks the code to be more strict about accepting stream specifiers. From
now on we strictly enforce the syntax in the documentation up until the
decisive part of the stream specifier. Therefore matching stream specifiers
always need to be correct, non matching specifiers only need to be correct
until the decisive part.
Also recursion is changed to a simple loop.
Signed-off-by: Marton Balint <cus@passwd.hu>
This removes lots of code duplication and also allows more complex specifiers,
for example you can use p:204:aⓂ️language:eng to select the English language
audio stream from program 204.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: signed integer overflow: 7738135736989908991 - -7954308516317364223 cannot be represented in type 'long'
Fixes: find_stream_info_usan
Reported-by: Thomas Guilbert <tguilbert@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This avoids surprising developers. Its bad to surprise developers with
such unexpected things.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
We check for the documented explanation of the "Ignore code" in extract_extradata_check() already
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Because it will be used by avformat/segment.c or other module which
need to automatically create sub-directories operation.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
This utility function creates 64-bit NTP time format as per the RFC
5905.
A simple explaination of 64-bit NTP time format is here
http://www.beaglesoft.com/Manual/page53.htm
These fields will allow the mpegts demuxer to expose details about
the PMT/program which created the AVProgram and its AVStreams.
In mpegts, a PMT which advertises streams has a version number
which can be incremented at any time. When the version changes,
the pids which correspond to each of it's streams can also change.
Since ffmpeg creates a new AVStream per pid by default, an API user
needs the ability to (a) detect when the PMT changed, and (b) tell
which AVStream were added to replace earlier streams.
This has been a long-standing issue with ffmpeg's handling of mpegts
streams with PMT changes, and I found two related patches in the wild
that attempt to solve the same problem:
The first is in MythTV's ffmpeg fork, where they added a
void (*streams_changed)(void*); to AVFormatContext and call it from
their fork of the mpegts demuxer whenever the PMT changes.
The second was proposed by XBMC in
https://ffmpeg.org/pipermail/ffmpeg-devel/2012-December/135036.html,
where they created a new AVMEDIA_TYPE_DATA stream with id=0 and
attempted to send packets to it whenever the PMT changed.
Signed-off-by: Aman Gupta <aman@tmm1.net>
For seekable mpegts streams, duration is calculated from
pts by seeking to the end of the file for a pts and subtracting
the initial pts to compute a duration.
This can be expensive in terms of added latency during
probe, especially when streaming over a network. This new
option lets you skip the duration calculation, which is useful
when you don't care about the value and want to save some overhead.
This patch is particularly useful when dealing with live mpegts
streams. Normally such streams are not seekable, so durations
are not calculated. However in my case I am dealing with a seekable
live mpegts stream (networked access to a .ts file which is still
being appended to).
Signed-off-by: Aman Gupta <aman@tmm1.net>
Similar to 4c9c4fe8b21, but for durations. This fixes#7151, where
the report duration and bitrate on a mpegts stream is wildly off
due to the dvb_teletext stream's timings.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If the parser returns full frames, then the output pointer retured by
av_parser_parse2() is guaranteed to point to data contained in the
input packet's buffer.
Create a new reference to said buffer in that case, to avoid
unnecessary data copy when queueing the packet later in the function.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes: runtime error: signed integer overflow: 18133149658382192 - -9223090561878065151 cannot be represented in type 'long long'
Fixes: crbug 831552
Reported-by: Matt Wolenetz <wolenetz@google.com>
Reviewed-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: crbug 829153
Reported-by: Matt Wolenetz <wolenetz@google.com>
Reviewed-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In some cases, mainly working with multiprogram mpeg-ts containers as
input, it would be handy to select sub stream of a specific program by
their metadata.
This patch makes it possible to narrow the stream selection among
streams of the specified program by stream metadata.
Examples:
p:601:m:language:hun will select all sub streams of program with id 601
where sub streams have metadata key named 'language' with value 'hun'.
p:602:m:guide will select all sub streams of program with id 602 where
sub streams have metadata key named 'guide'.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently when specifying the program id you can only decide to select
all stream of the specified program (e.g. p:103 will select all streams
of program 103) or narrow the selection to a specific stream sub index
(e.g. p:145:1 will select 2nd stream of program 145.) But you can not
specify like all audio streams of program 145 or 3rd video stream of
program 311.
In some case, mainly working with multiprogram mpeg-ts containers as
input, this feature would be handy.
This patch makes it possible to narrow the stream selection among
streams of the specified program by stream type and optionally its
index. Handled types: a, v, s, d.
Examples: p:601:a will select all audio streams of program 601,
p:603:a:1 will select 2nd audio streams of program 603,
p:604:v:0 will select first video stream of program 604.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: runtime error: signed integer overflow: 7738135736989908991 - -7898362169240453118 cannot be represented in type 'long'
Fixes: Chromium bug 796778
Reported-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This prevents leaks in the rare cases the function is called when extradata
already exists.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This only affected demuxers that didn't return reference counted packets.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This will replace the 1024 character limited filename field. Compatiblity for
output contexts are provided by copying filename field to URL if URL is unset
and by providing an internal function for muxers to set both url and filename
at once.
Signed-off-by: Marton Balint <cus@passwd.hu>
