* fix(daemon): reclaim disk on long-open issues + correct cancelled-status check
Two related fixes for GitHub #1890 (self-hosted disk space growth):
- The GC's done/cancelled branch compared `status.Status` against `"canceled"`
(single l), but the issue schema and the rest of the daemon use `"cancelled"`
(double l). Cancelled issues therefore never matched and only fell out via the
72h orphan TTL, which itself doesn't fire because cancelled issues are still
reachable. Aligning the spelling lets cancelled-issue task dirs be reclaimed
on the normal TTL path.
- Add a third GC mode, artifact-only cleanup, for the common case the report
flagged: an issue stays open for days while many tasks complete on it, so
per-task `node_modules`, `.next` and `.turbo` directories accumulate without
ever becoming GC-eligible. The new branch fires when `.gc_meta.completed_at`
is older than `MULTICA_GC_ARTIFACT_TTL` (default 12h), the env root is not
currently in use by an active task, and the issue is still alive. It removes
only directories whose basename matches `MULTICA_GC_ARTIFACT_PATTERNS`
(default narrow: `node_modules,.next,.turbo`); source, `.git`, `output/`,
`logs/` and the meta file are preserved so subsequent tasks can still resume
the workdir. Patterns containing path separators are dropped, `.git` subtrees
are never descended into, symlinked matches are not followed, and every
removal target is verified to live inside the task dir.
Bookkeeping: `Daemon` now tracks active env roots with a refcounted set so the
GC loop never reclaims a directory that is mid-execution; `runTask` claims the
predicted root early plus the prior workdir on reuse paths. The cycle log is
extended with bytes reclaimed and per-pattern counts so self-hosted operators
can see what was freed.
Docs: extend the daemon configuration table in CLI_AND_DAEMON.md with the new
GC env vars and add a Workspace garbage collection section explaining the
three modes and the artifact-pattern contract.
Co-authored-by: multica-agent <github@multica.ai>
* fix(daemon): protect active env root from full GC removal too
Address GPT-Boy's PR #1931 review: the active-root guard only fired in the
artifact-cleanup branch, leaving a real race on the full-removal paths. A
follow-up comment on a long-done issue dispatches a task that reuses the prior
workdir, but `CreateComment` does not bump issue.updated_at — so the issue
still satisfies the done+stale GCTTL window and `gcActionClean` would
`RemoveAll` the directory mid-execution. The orphan-404 path is similarly
exposed when a token's workspace access is in flux.
Move the `isActiveEnvRoot` check to the top of `shouldCleanTaskDir` so all
three delete actions (clean, orphan, artifact) skip an in-use env root in one
place, and drop the now-redundant guard from the artifact branch.
Add tests covering the three at-risk paths: active root + done/stale issue,
active root + 404 issue past orphan TTL, active root + no-meta orphan past
TTL.
Also align two stale comments noted in the same review: cleanTaskArtifacts now
documents that symlinks are skipped entirely (the previous note implied the
link itself was removed), and GCOrphanTTL no longer claims that 404s are
cleaned immediately — the implementation gates them on the same TTL.
Co-authored-by: multica-agent <github@multica.ai>
---------
Co-authored-by: multica-agent <github@multica.ai>
* feat(cli): add `issue subscriber` commands
Wrap the existing /subscribers, /subscribe, and /unsubscribe endpoints as
`multica issue subscriber list|add|remove`, mirroring the comment subcommand
shape. `--user <name>` reuses resolveAssignee to resolve a member or agent;
without the flag, the action targets the caller.
* fix(issues): default subscribe target to resolveActor, not X-User-ID
When no user_id is posted, subscribe/unsubscribe hardcoded the target as
("member", X-User-ID). A CLI caller running as an agent (X-Agent-ID set)
then subscribed the underlying member rather than the agent itself,
which contradicts the "defaults to the caller" contract.
Derive the default via resolveActor so the endpoint mirrors caller
identity consistently — agent caller → agent row, member caller →
member row. Adds a regression test covering the agent caller path.
These trigger kinds exist in the DB schema but nothing on the server
fires them:
- autopilot_scheduler.ClaimDueScheduleTriggers filters kind='schedule'
(pkg/db/queries/autopilot.sql:150)
- DispatchAutopilot is reached only from the scheduler (source:schedule)
or POST /api/autopilots/{id}/trigger (source:manual); no inbound
webhook or api endpoint exists
- The UI only surfaces schedule creation
Exposing them in the CLI lets users create triggers that sit in the DB
doing nothing. Drop --kind from trigger-add, require --cron, always
send kind=schedule. Re-add the flag when the server grows a dispatch
path for the other kinds.
* feat(cli): add autopilot commands
Expose the existing autopilot REST API through the multica CLI so
users and agents can list, get, create, update, delete, trigger, and
inspect autopilots, plus manage their triggers (schedule/webhook/api).
Also surface the read + core write commands in the agent meta skill
prompt so agents discover them without needing --help.
- new cmd_autopilot.go (+ test) wiring /api/autopilots endpoints
- add APIClient.PatchJSON (autopilot update uses PATCH)
- expose autopilot in CORE COMMANDS group
- extend runtime_config.go meta skill with autopilot entries
- document autopilot command group in CLI_AND_DAEMON.md
* fix(autopilot): address code review — restrict run_only, validate workspace on update
Code review caught two issues with the initial CLI PR:
1. run_only mode is broken end-to-end. The daemon-side
resolveTaskWorkspaceID() in internal/handler/daemon.go only resolves
workspace from issue/chat, so run_only tasks (which have neither)
return 404 from /start. BuildPrompt() would also emit an empty issue
ID. The service-level resolver in internal/service/task.go already
handles AutopilotRunID, but the daemon endpoint uses the handler
copy. Fixing that path is out of scope for the CLI PR; drop
run_only from the CLI and docs so we don't recommend a mode that
cannot complete. Server continues to accept it for the existing UI.
2. UpdateAutopilot did not verify that a new assignee_id belongs to
the workspace, unlike CreateAutopilot. This let a PATCH swap in an
agent from a different workspace. Mirror the same
GetAgentInWorkspace check.
The project CRUD commands (list, get, create, update, delete, status)
and the `--project` flag on issue commands have been implemented in
the CLI but were not yet documented. Add them to both the docs site
reference and the repo-level CLI_AND_DAEMON.md so the feature is
discoverable.
Closes MUL-867
Co-authored-by: Eve <eve@multica.ai>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* docs: add Pi and Gemini runtimes to supported-agent references
CLI_AND_DAEMON.md, SELF_HOSTING.md, and SELF_HOSTING_ADVANCED.md listed
claude/codex/opencode/openclaw/hermes as supported runtimes in their agent
tables and env-var overrides but omitted the pi and gemini entries that
the daemon already registers (server/internal/daemon/config.go).
* docs(readme): list all supported runtimes (add Hermes, Gemini, Pi)
* docs: add Cursor runtime, fix Pi URL, clarify daemon ASCII diagram
- Add Cursor Agent (cursor-agent CLI, MULTICA_CURSOR_PATH/MODEL) to the
supported-runtime tables, env-var lists, and prose across README,
CLI_AND_DAEMON, CLI_INSTALL, SELF_HOSTING, and SELF_HOSTING_ADVANCED.
- Fix Pi's canonical URL from github.com/paperclipai/paperclip to
https://pi.dev/.
- Rework the Agent Daemon box in both READMEs so provider names live in
an annotation outside the box instead of being wrapped mid-word
(`OpenClaw/Code`), which read as a phantom "Code" runtime.
Decouple install.sh from environment configuration — install.sh now only
installs the CLI binary (and optionally Docker via --with-server), while
all environment configuration moves to `multica setup` subcommands.
Key changes:
- install.sh: remove config writes, rename --local to --with-server
- multica setup: add cloud/self-host subcommands with --server-url,
--app-url, --port, --frontend-port flags and --profile support
- Add config overwrite protection with interactive prompt
- Remove redundant commands: `config local`, `auth login` alias
- Replace silent multica.ai fallbacks with explicit errors
- Onboarding wizard: dynamically show correct setup command for
Cloud vs Self-host environments
- Update all docs, landing page, and install scripts for consistency
* fix(docker): remove COPY for non-existent tsconfig/node_modules
The @multica/tsconfig package has zero dependencies, so pnpm install
never creates a node_modules directory for it. The COPY --from=deps
instruction fails with "not found" during docker compose build.
Closes#658
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(docker): add dotenv as explicit dependency for web app
next.config.ts imports dotenv to load .env for REMOTE_API_URL, but
dotenv was never declared as a dependency. It worked locally as a
hoisted transitive dep but fails in Docker's stricter module resolution.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* docs: fix daemon setup instructions for local Docker deployments
The daemon setup section in SELF_HOSTING.md had production URLs as the
active example and local Docker URLs commented out. Since this is a
self-hosting guide, local Docker should be the primary example.
Key changes:
- Make local Docker URLs the default in daemon setup examples
- Add explicit warning that CLI defaults to hosted service
- Add 'multica config set' instructions for persistent setup
- Add link from Quick Start to daemon setup section
- Clarify that daemon runs on host machine, not inside Docker
- Update CLI_AND_DAEMON.md self-hosted section similarly
Closes#660
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add a structured installation guide (CLI_INSTALL.md) designed for AI agents
to fetch and execute step-by-step: install CLI, authenticate, and start the
daemon. Update README and README.zh-CN CLI sections with an agent-friendly
paste option alongside the existing manual instructions.
Also fix brew formula name in CLI_AND_DAEMON.md (multica-cli → multica) to
match .goreleaser.yml.
- Add CLI_AND_DAEMON.md with full command reference, daemon configuration,
profiles, and self-hosted setup instructions
- Rename LOCAL_DEVELOPMENT.md → CONTRIBUTING.md for conventional naming
- Update README.md references and link to the new CLI guide
