* fix(cli): add --content-file / --description-file for non-ASCII on Windows
Windows PowerShell 5.1 (the Win11 default) and cmd.exe re-encode HEREDOC
content through the active console codepage before piping it to a child
process. Characters the codepage cannot represent are silently replaced
with `?`, so agents on Chinese Win11 hosts emitting `--content-stdin` /
`--description-stdin` HEREDOCs land all of their Chinese as `?` in the
issue body and comments. The daemon log shows the original Chinese
correctly because slog writes to a file directly, so the regression
hides until the user opens the issue page.
Add a `--content-file <path>` / `--description-file <path>` source to
`resolveTextFlag`: the CLI reads the file straight off disk, preserves
UTF-8 bytes verbatim, and skips the shell entirely. The runtime config
injected into AGENTS.md / CLAUDE.md now surfaces this as the canonical
Windows fallback when the daemon host runs on Windows; non-Windows hosts
keep the existing stdin/HEREDOC guidance untouched.
Closes#2198, #2236.
Co-authored-by: multica-agent <github@multica.ai>
* fix(execenv): route every Windows-host stdin directive at --content-file
GPT-Boy on PR #2247 caught that the previous patch only inserted a Windows
fallback into the Available Commands section. Two later prompt surfaces
still hard-coded `--content-stdin` and overrode it for the agent:
- The Codex-specific paragraph in `buildMetaSkillContent`, which always
said "always use `--content-stdin` with a HEREDOC".
- `BuildCommentReplyInstructions`, which is re-emitted on every turn for
comment-triggered tasks (both via the AGENTS.md/CLAUDE.md workflow and
the daemon's per-turn prompt) and mandated the same HEREDOC pipe.
On Windows hosts we now branch both surfaces to a file-based template:
the agent writes the body to a UTF-8 file with its file-write tool and
posts via `--content-file <path>`. Non-Windows hosts keep the existing
stdin/HEREDOC guidance untouched.
Tests:
- `TestBuildCommentReplyInstructionsWindowsUsesContentFile` pins the
Windows / non-Windows reply-instruction text directly.
- `TestInjectRuntimeConfigWindowsCommentTriggerHasNoStdin` asserts that
the end-to-end CLAUDE.md / AGENTS.md surface for a comment-triggered
Windows task has no remaining `--content-stdin` directive that could
override the Windows fallback (covers Claude + Codex providers).
Co-authored-by: multica-agent <github@multica.ai>
* fix(execenv): make Windows comment block file-first, pin tests by GOOS
GPT-Boy's second review on PR #2247 flagged two follow-up blockers:
1. The Windows comment/description block in `buildMetaSkillContent` was
"stdin first, file caveat appended" — agents on Windows still saw
"Agent-authored comments should always pipe content via stdin" /
"MUST pipe via stdin" / `--description-stdin` directives before
reaching the Windows fallback, so the contradicting instruction was
live in the same prompt. Rewrite the entire Available Commands
bullet for Windows hosts as file-first: the headline line names
`--content-file`, the bulleted rules name `--content-file` /
`--description-file`, and stdin only appears in anti-prescriptive
"do NOT pipe via …" prose.
2. The existing non-Windows tests (TestBuildCommentReplyInstructions
IncludesTriggerID, TestInjectRuntimeConfigDirectsMultiLineWritesToStdin,
TestInjectRuntimeConfigCodexEmphasizesStdinForFormattedComments,
TestInjectRuntimeConfigCommentTriggerUsesHelper) all depended on
`runtimeGOOS` defaulting to non-Windows; they would silently fail on
a Windows test runner. Pin them to `runtimeGOOS = "linux"` via
save+restore and drop t.Parallel so they don't race with the
GOOS-mutating Windows tests.
Test additions:
- TestInjectRuntimeConfigWindowsRecommendsContentFile now asserts the
Windows AGENTS.md does NOT contain prescriptive stdin phrasings
(`MUST pipe via stdin`, `use --description-stdin and pipe a HEREDOC`,
`<<'COMMENT'`, `Agent-authored comments should always pipe content via
stdin`, `always use --content-stdin`) on top of the file-first
positive assertions. The ban list pins prescriptive substrings, not
bare flag names, so anti-prescriptive prose like "do NOT pipe via
--content-stdin" doesn't trip the ban.
- TestInjectRuntimeConfigWindowsCommentTriggerHasNoStdin gets the same
expanded ban list across the Available Commands, Codex paragraph,
and per-turn reply template surfaces.
- The non-Windows side of TestInjectRuntimeConfigWindowsRecommendsContentFile
pins that the Linux stdin/HEREDOC contract is still in place, so a
future refactor can't accidentally move every host to file-first.
Co-authored-by: multica-agent <github@multica.ai>
---------
Co-authored-by: multica-agent <github@multica.ai>
* feat(daemon): harden agent mention-loop instructions
Two agents that mention each other via `mention://agent/<id>` can fall into
an infinite reply loop — each says "I'm done" in prose but keeps
`@mentioning` the other, which re-enqueues their run. Adding hard caps on
agent-to-agent turns conflicts with Multica's design principle of giving
agents the same authorship freedom as humans, so this change hardens the
instructions that the harness injects instead.
- Replace the terse "mentions are actions" blurb with a full Mentions
protocol: `side-effecting` warning, explicit "when NOT to mention"
(replying to another agent, sign-offs, thanks) and "when a mention IS
appropriate" (human escalation, first-time delegation, user asked).
- Add a pre-workflow decision step for comment-triggered runs: decide
whether a reply is warranted at all, decide whether to include any
`@mention`, and clarify that the post-a-comment rule is mandatory *if*
you reply — silence is a valid exit for agent-to-agent threads.
- Thread the triggering comment's author kind + display name
(`TriggerAuthorType` / `TriggerAuthorName`) from the claim endpoint
through the daemon task type, per-turn prompt, and CLAUDE.md workflow.
When the author is another agent, both surfaces now name that agent
and warn against sign-off mentions.
- Soften the old closing line that told agents to `always` use the
mention format — the word generalized to member/agent mentions and
encouraged the very behavior that causes loops.
Refs GH#1576, MUL-1323.
* fix(daemon): remove MUST-respond conflict and sanitize trigger author name
Addresses two blocking points on PR #1581:
1. buildCommentPrompt told the agent "You MUST respond to THIS comment"
and unconditionally appended the reply command — directly conflicting
with the new agent-to-agent silence-as-valid-exit workflow. Models
were likely to keep following the older must-reply rule and fall back
into the loop this PR is trying to close.
Rewrite the header as "Focus on THIS comment — do not confuse it
with previous ones" (keeps the anti-stale-comment signal) and change
BuildCommentReplyInstructions to open with "If you decide to reply,
post it by running exactly this command" so the reply command is
available but conditional across both prompt surfaces.
2. Raw agent/user display names were being embedded directly into the
high-priority prompt and CLAUDE.md via TriggerAuthorName. Agent and
member names are only validated as non-empty at write time, so a
name containing newlines, backticks, or fake mention markup would
turn the field into a cross-agent prompt-injection surface.
Add execenv.SanitizePromptField — strip control runes, collapse
whitespace, drop markdown structural characters (backtick, asterisk,
brackets, pipe, angle brackets, hash, backslash), truncate to 64
runes — and apply it at both embed sites (per-turn prompt and
CLAUDE.md). Defense-in-depth at the consumption layer so this works
for already-stored names without a migration.
Tests: TestSanitizePromptField covers the policy; TestBuildPromptSanitizesAgentName
plants an attack payload in TriggerAuthorName and checks the rendered prompt
does not leak the newline-anchored injection or the fake mention markup.
TestBuildPromptCommentTriggered*{,ByMember} updated to lock in the
conditional reply-command framing.
* refactor(daemon): trim redundant CLAUDE.md preamble and drop name sanitizer
Per PR #1581 feedback:
1. Remove the `if ctx.TriggerAuthorType == "agent"` preamble block in
runtime_config.go. It duplicated what workflow steps 4 and 5 already
say ("Decide whether a reply is warranted", "Never @mention the
agent you are replying to as a thank-you or sign-off"), so the
signal lands the same without the extra ~7 lines of CLAUDE.md. The
per-turn prompt preamble in prompt.go stays — that surface has no
numbered workflow below it and would otherwise lose the
silence-as-exit signal.
2. Delete execenv.SanitizePromptField + its test. Workspace agents are
created by trusted team members, so the cross-agent name-injection
surface it defended isn't realistic in the current trust model.
3. Drop TriggerAuthorType/Name from execenv.TaskContextForEnv and stop
populating them in daemon.go — they're no longer read by the
execenv package. The same fields on daemon.Task stay because
prompt.go still needs them to label the triggering author in the
per-turn prompt.
Tests simplified to match the leaner shape: CLAUDE.md regression
guards now assert that the anti-loop phrases live in the numbered
workflow, and the sanitizer-specific tests are removed.
* fix(agent/comments): re-emit trigger comment id every turn + server-side parent_id guard
Resumed Claude sessions keep prior turns' tool calls in context, so a
comment-triggered task could reuse the PREVIOUS turn's --parent UUID
instead of the current trigger's. The reply landed in the wrong thread
(MUL-1125): backend stored exactly what the agent sent, but the agent
pulled a stale UUID from its own conversation memory.
Two layers of defense:
1. Extract BuildCommentReplyInstructions so daemon.buildCommentPrompt
and execenv.InjectRuntimeConfig emit the same "use this exact
--parent, do not reuse values from previous turns" block. The
per-turn prompt now carries the current TriggerCommentID, which it
previously relied on CLAUDE.md for (and CLAUDE.md isn't re-read
mid-session).
2. Handler-side guard in CreateComment: when an agent posts from inside
a comment-triggered task (X-Agent-ID + X-Task-ID, task has
TriggerCommentID), require parent_id == task.TriggerCommentID or
return 409. Assignment-triggered tasks are untouched.
* fix(agent/comments): scope parent_id guard to the task's own issue
Two issues from CI + GPT-Boy's review:
1. Guard was too broad: the CLI stamps X-Task-ID on every request, so an
agent legitimately commenting on a different issue while its current
task was comment-triggered would get 409'd with the wrong issue's
trigger comment id. Narrow the guard to fire only when the request's
issue matches the task's own issue — cross-issue agent activity
stays unblocked.
2. The integration test tried to insert a second queued task for the
same (agent, issue), which hits the idx_one_pending_task_per_issue_agent
unique index. Replace the assignment-triggered-task sub-case with a
cross-issue regression test (the scenario we now need to cover anyway):
post on issue B while X-Task-ID points at a comment-triggered task on
issue A, expect 201.
