* fix(routing): rename /new-workspace to /workspaces/new + extend reserved slug list
Two related changes:
1. Rename the global workspace-creation route from /new-workspace to
/workspaces/new. The hyphenated word-group `new-workspace` is a
common user workspace name (last deploy was blocked by a real user
with exactly this slug). Industry consensus from auditing Linear,
Vercel, Notion, Slack, GitHub: zero major SaaS uses hyphenated
word-group root routes — they all use single words or `/{noun}/{verb}`
pairs. Reserving the noun `workspaces` automatically protects the
entire `/workspaces/*` subtree, so future workspace-related routes
(`/workspaces/{id}/edit`, `/workspaces/{id}/billing`, etc.) need no
additional reserved slugs or audit migrations.
2. Extend the reserved slug list to cover the minimal set recommended by
the URL-design audit: full auth flow vocab, RFC 2142 mailbox names
(postmaster, abuse, noreply...), hostname confusables (mail, ftp,
static, cdn...), and likely-future platform routes (docs, support,
status, legal, privacy, terms, security, etc.). Production data
audit confirmed zero conflicts for every newly added slug, so
migration 047 (the safety net) passes cleanly.
Slugs intentionally NOT added despite being in scope of the audit:
admin, multica, new, setup, www. Each has one production workspace
already using it; adding them now would block deploy. They will be
handled in a follow-up PR via owner outreach + targeted rename.
Also adds a CLAUDE.md convention rule: new global routes MUST use a
single word or `/{noun}/{verb}` pair, never hyphenated word groups.
This prevents the pattern from regenerating itself.
This PR does NOT resolve the currently-blocked prd deploy — that requires
the existing `slug='new-workspace'` workspace (owner: Dhruv Raina) to be
renamed by ops. After that workspace is renamed and migration 046 passes,
this PR's migration 047 will also pass on its first run.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* review: drop migration 046, sweep stale comments, drive reserved test from map
Address code review on PR #1188:
1. Delete migration 046 (audit_new_workspace_slug). It audits "new-workspace"
which is no longer a reserved slug after this PR's rename. Removing 046
has an unexpected upside: it directly unblocks the currently-stuck prd
deploy. Migration 046 had never successfully applied (it was the source
of the deploy block); the audit-only nature means down-rollback is a
no-op. The user workspace previously caught by 046 (slug='new-workspace',
owner: Dhruv Raina) is now safe — `new-workspace` is no longer reserved,
so the slug correctly resolves to that workspace and the global route
`/workspaces/new` doesn't shadow it.
2. Refactor workspace_test.go to drive its reserved-slug list from the
reservedSlugs map directly via `for slug := range reservedSlugs`. The
previous hand-copied list was already drifting (40-ish entries vs 58 in
the map). Now drift is impossible.
3. Sweep ~10 stale `/new-workspace` references in code comments to
`/workspaces/new`. Comments only — runtime unchanged. The references
in reserved-slugs.ts/workspace_reserved_slugs.go and CLAUDE.md are
intentionally kept as anti-pattern examples ("don't add hyphenated
word-group root routes like /new-workspace").
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(daemon): allow startup with zero workspaces
The daemon used to fail fast with "no runtimes registered" when the
initial workspace sync returned zero workspaces. This masked a latent
bug: a newly-signed-up user has no workspaces yet, so the daemon would
crash immediately after login instead of waiting for the first
workspace to be created.
workspaceSyncLoop already polls every 30s (daemon.go:107, 365) to
discover new workspaces — the fail-fast check at startup was bypassing
this dynamic discovery. Remove the check so the daemon stays resident
and picks up the first workspace whenever it appears.
PR #1001 partially addressed this for the "server has workspaces but
local CLI config is empty" case. This finishes the job for the true
zero-workspace state, which until now was masked by the onboarding
wizard always creating a workspace before the daemon started.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor(views): extract CreateWorkspaceForm for reuse
Modal and the upcoming /new-workspace page share the same form +
mutation + slug validation. Extract to a shared component so they
can't drift.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(views): add NoAccessPage for unknown or inaccessible workspace slugs
Rendered when the URL slug doesn't resolve to a workspace the user has
access to. Deliberately doesn't distinguish 404 vs 403 to avoid letting
attackers enumerate workspace slugs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(paths): add /new-workspace route and reserve slug on both sides
Adds paths.newWorkspace() builder, registers /new-workspace as a global
(pre-workspace) prefix, and reserves the "new-workspace" slug on both
frontend and backend (kept in sync per convention). Existing
"onboarding" reservation retained — removing it would desync FE/BE
and leaves no future fallback if an onboarding route is revived.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* chore(migrations): audit no existing workspace uses 'new-workspace' slug
Migration 046 blocks deploy if any workspace in the DB has slug =
'new-workspace', which would shadow the new global workspace creation
route at /new-workspace.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: add /new-workspace route on web and desktop
Renders the CreateWorkspaceForm as a full-page workspace creation flow,
used as the destination for first-time users with zero workspaces.
Replaces the 4-step onboarding wizard with a single form.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: show NoAccessPage on unknown workspace slug, hold null during active removal
Layouts render NoAccessPage when the URL slug doesn't resolve to an
accessible workspace — except when the slug previously resolved during
this layout instance's lifetime.
URL and cache are two asynchronous signals: there will always be a
short window where the URL still points at the old workspace but the
cache has already been invalidated (e.g. just after a delete/leave
mutation, or a realtime workspace:deleted event). Rendering
NoAccessPage during that window would flash "Workspace not available"
with recovery buttons in front of a user who just deleted the
workspace themselves — jarring and wrong.
useWorkspaceSeen classifies the two cases:
- slug was seen before, now gone → user's intent is changing (caller
is navigating away); render null, no flash
- slug never seen → user is genuinely looking at an inaccessible
workspace (stale bookmark, revoked access, link from a former
teammate); render NoAccessPage with recovery options
NoAccessPage deliberately does not distinguish 404 vs 403 to avoid
letting attackers enumerate workspace slugs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor: redirect zero-workspace users to /new-workspace instead of /onboarding
Switches 8 call sites and the CLI:
- Web: login, auth callback, landing redirect-if-authenticated
- Desktop: routes.tsx IndexRedirect
- Shared: dashboard guard, invite page fallback, workspace-tab on delete,
realtime sync on workspace loss
- CLI: cmd_login.go waitForOnboarding now opens /new-workspace
Also adds /new-workspace to navigation store's lastPath exclusion list
so it doesn't get persisted as a 'last visited' page.
Adds a desktop App.tsx effect that restarts the daemon when workspace
count transitions 0 → ≥1, so first-workspace creation triggers
immediate daemon pickup rather than waiting up to 30s for the daemon's
workspaceSyncLoop.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor: remove onboarding flow
The 4-step onboarding wizard (workspace → runtime → agent → demo issues)
is replaced by:
- /new-workspace: a single-page workspace creation form (Phase 3)
- NoAccessPage: explicit feedback when a slug doesn't resolve (Phase 4)
- daemon zero-workspace bootstrap (Phase 1) so the daemon doesn't
crash before the user creates their first workspace
- desktop daemon restart on first workspace creation (Phase 5) for
instant pickup instead of the 30s workspaceSyncLoop tick
Deletions:
- packages/views/onboarding/ (OnboardingWizard + 4 step components + tests)
- apps/web/app/(auth)/onboarding/page.tsx
- apps/desktop/src/renderer/src/components/onboarding-gate.tsx (+test)
- OnboardingGate wrapper in desktop-layout.tsx
- OnboardingRoute + /onboarding route in desktop routes.tsx
- paths.onboarding() builder + /onboarding from GLOBAL_PREFIXES
- packages/views/package.json onboarding export
- /onboarding from navigation store's EXCLUDED_PREFIXES
Retained (intentional):
- 'onboarding' in RESERVED_SLUGS (both FE + BE) — kept for FE/BE sync
and future-proofing if /onboarding is ever revived
Also drops 4 demo issues that onboarding used to create on the new
workspace ('Say hello', 'Set up repo', etc.). New workspaces are now
fully empty; all list views already render empty-state UI correctly.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* chore: clean stale 'onboarding' references in comments and CLI helpers
Batch cleanup of references to the removed onboarding flow:
- 13 comment sites mentioning 'onboarding' updated to reflect the
new /new-workspace flow or removed where no longer accurate
- CLI waitForOnboarding renamed to waitForWorkspaceCreation (function
name + docstring); behavior unchanged
The 'onboarding' reserved slug entries (frontend + backend) are
intentionally retained — see prior commit rationale.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor(views): extract shared NewWorkspacePage shell
The web (/new-workspace) and desktop (NewWorkspaceRoute) pages had
identical outer layout — same container, heading, and copy — with only
the onSuccess navigation primitive differing. That's exactly the
No-Duplication Rule pattern: extract the shared UI, inject the
platform-specific behavior.
The apps now only own the thin auth guard (web needs it, desktop
routes below WorkspaceRouteLayout already handle it) and the
onSuccess → navigate call.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor: remove rollback compat layer and tighten daemon restart trigger
Two cleanup items:
1. Drop localStorage['multica_workspace_id'] double-write in both
workspace layouts. That write was added as a rollback safety net
for the workspace-slug URL refactor (PR #1138) — the refactor has
since landed and stabilized, so the compat shim is no longer
needed. Per CLAUDE.md: don't keep compat layers beyond their
purpose.
2. Tighten the desktop daemon-restart trigger. The previous ref-based
logic fired a restart on any 0→1 workspace-count transition,
including account switches (user A logout → user B login). Scope
it precisely to 'this session started with zero workspaces and
just gained one' using a three-state ref (null=undecided,
true=empty-start, false=already-restarted-or-started-nonempty).
Account switches are already handled by daemon-manager.ts on
token change, so this avoids a redundant restart there.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(auth): redirect to /login on logout and unauthenticated workspace visits
Two gaps previously left users stuck on blank workspace pages:
1. app-sidebar logout() cleared all state but never moved the URL. The
current path is /{workspaceSlug}/... which has no meaning without
auth; the workspace layout would then see user=null, render null
(via the hasBeenSeen short-circuit), and the user saw a blank page
thinking logout didn't work.
2. The workspace layouts (web + desktop) had no !user handling at all.
Any path that leaves user=null — token expiration, cross-tab logout,
or fresh visit to a workspace URL without a session — resulted in
the same blank screen.
Fix:
- app-sidebar.logout() explicitly push(paths.login()) after authLogout()
to cover the primary (user-initiated) logout path.
- Both workspace layouts get a defensive useEffect that redirects to
/login whenever auth has settled and user is null. Covers token
expiration, realtime logout, and any other silent session loss.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor(runtime): derive runtime usage from task_usage only
The daemon used to scan each runtime's local CLI log directory every 5
minutes (Claude Code, Codex, OpenCode, OpenClaw, Hermes) and post daily
aggregates to /api/daemon/runtimes/{id}/usage. Those directories are
shared with the user's own local CLI sessions, so the user's personal
usage was being counted as Daemon-executed usage. Cursor and Gemini had
no scanner at all, so their runtime-level aggregates were always zero.
Switch GetRuntimeUsage to aggregate task_usage (already scoped to
Daemon-executed tasks) via agent_task_queue.runtime_id. Single source of
truth; Cursor/Gemini/Copilot get runtime usage for free; no reliance on
external CLI log formats.
Removes:
- server/internal/daemon/usage/ (all scanners)
- Daemon.usageScanLoop + providerToRuntimeMap
- Client.ReportUsage
- ReportRuntimeUsage handler + POST /api/daemon/runtimes/{id}/usage
- UpsertRuntimeUsage / GetRuntimeUsageSummary queries
- runtime_usage table (migration 046)
Refs: MUL-786
* fix(runtime): bucket daily usage by task_usage.created_at, not enqueue time
ListRuntimeUsage was aggregating by DATE(atq.created_at) and filtering
on atq.created_at. agent_task_queue.created_at is the enqueue timestamp,
which drifts from actual token-production time: a task queued at 23:58
and executed at 00:05 was attributed to yesterday; a task sitting in
the queue overnight was counted on the queue day.
The ?days=N cutoff also became a rolling window (now() - N) instead of
a calendar-day boundary, silently clipping the morning of the earliest
day returned.
Switch bucket + filter to task_usage.created_at (~= task completion /
usage-report time) and snap the since cutoff to start-of-day via
DATE_TRUNC.
Add a regression test covering both scenarios: cross-midnight task
attributes to the day tokens were reported, and the earliest day's
pre-cutoff rows are still included.
* Reapply "feat: workspace URL refactor + slug-first API identity (#1131)" (#1137)
This reverts commit 9b94914bc8.
* compat: legacy URL redirect + localStorage double-write for safe rollback
The first attempt at this refactor (#1131) was reverted because existing
users on old URLs (/issues, /projects, etc.) hit 404 immediately after
deploy, and rolling back left them with empty dashboards — the legacy
code reads localStorage["multica_workspace_id"] to attach a workspace
to API requests, but the new code had stopped writing that key.
Two compat layers added on top of the restored refactor:
1. proxy.ts now intercepts legacy route prefixes (/issues/*, /projects/*,
/agents/*, /inbox/*, /my-issues/*, /autopilots/*, /runtimes/*,
/skills/*, /settings/*). Logged-in users with a last_workspace_slug
cookie are 302'd to /{slug}/{rest}, preserving their deep link. Users
without the cookie bounce through / where the landing page picks a
workspace client-side. Unauthenticated users go to /login.
2. Both layouts now double-write the workspace id to the legacy
localStorage key on every workspace entry. New code ignores this key
— it exists solely so that if this PR ever gets reverted again, the
legacy build reading the key would still find the correct workspace
and avoid the empty-dashboard symptom users saw during the rollback.
Net effect: any direction of deploy ↔ rollback is now cache-compatible,
and any direction of old bookmark → new route resolves without 404.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(platform): defer rehydrateAllWorkspaceStores to a microtask
Same React 19 render-phase restriction that forced setCurrentWorkspace
to defer its subscriber notifications. rehydrateAllWorkspaceStores
synchronously calls each persist store's rehydrate, which setState()s
the store, which schedules updates on any subscribed component. When
the workspace layout's render-phase ref guard invoked this, React
complained that SearchCommand (a store subscriber) couldn't be
re-rendered while WorkspaceLayout was still rendering.
Fix: queueMicrotask the rehydrate loop and add a pending-flag guard so
rapid workspace switches coalesce into one rehydrate on the final slug.
Persist stores tolerate one microtask of staleness — they hold UI
preferences, not correctness-critical state.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: workspace URL refactor + slug-first API identity
Make the URL the single source of truth for workspace identity.
All workspace-scoped URLs now carry the workspace slug as the first
path segment (/{slug}/issues, /{slug}/projects, etc.), matching the
industry standard (Linear, Notion, Vercel, GitHub).
## Key architectural changes
**URL-driven workspace identity:**
- Web routes moved under app/[workspaceSlug]/(dashboard)/
- Desktop routes nested under /:workspaceSlug
- paths.ts builder centralises all URL construction
- reserved-slugs validation (backend + frontend + DB migration audit)
**Slug-first API contract:**
- Frontend sends X-Workspace-Slug header (from URL) instead of X-Workspace-ID (UUID)
- Backend middleware resolves slug → UUID via GetWorkspaceBySlug, falls back to
X-Workspace-ID for CLI/daemon backwards compatibility
- WebSocket auth accepts ?workspace_slug query param with SlugResolver callback
**State cleanup:**
- Deleted: useWorkspaceStore (Zustand mirror), switchWorkspace/hydrateWorkspace/
clearWorkspace, localStorage["multica_workspace_id"], api._workspaceId
- useCurrentWorkspace() derives from URL slug + React Query workspace list
- useWorkspaceId() is now a bridge hook (no Context, derives from useCurrentWorkspace)
- WorkspaceIdProvider removed from DashboardGuard
- Paired module vars (slug + UUID) in workspace-storage.ts for non-React consumers
**Layout simplified:**
- Render-phase ref guard sets workspace context synchronously (no async gate)
- DashboardGuard handles auth redirect, loading state, and workspace resolution
- Subscriber notifications deferred via queueMicrotask (React 19 compat)
- persist namespace uses slug (immutable) instead of UUID
## Issues resolved
MUL-43 (share links), MUL-509 (mobile workspace switch), MUL-723 (workspace in URL),
MUL-727 (create workspace flash), MUL-728 (delete workspace no-navigate),
MUL-820 (sidebar Join not switching)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: resolve code review C3/C4/C5/C6 — desktop deadlock + hardcoded paths
C3: Desktop OnboardingGate was calling useCurrentWorkspace() outside
WorkspaceSlugProvider → always null → permanent onboarding deadlock.
Rewrite to use useQuery(workspaceListOptions()) which reads React Query
cache directly without slug context. Remove DashboardGuard from
DesktopShell (auth gating handled by AppContent, workspace routing by
WorkspaceRouteLayout per-tab).
C4: Landing page "Dashboard" links hardcoded /issues (no longer valid).
Changed to / — proxy handles redirect to /{lastSlug}/issues.
C5: autopilots-page.tsx had one hardcoded /autopilots/${id} link.
Changed to wsPaths.autopilotDetail(id).
C6: inbox-page.tsx hardcoded /inbox paths. Changed to wsPaths.inbox().
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): wrap shell in WorkspaceSlugProvider from module var
AppSidebar calls useWorkspacePaths() → useRequiredWorkspaceSlug() which
throws outside WorkspaceSlugProvider. In the desktop shell, the sidebar
renders at the shell level (outside any tab's WorkspaceRouteLayout).
Fix: DesktopShell reads the current slug via useSyncExternalStore on
the workspace-storage singleton. When slug is available, wraps the
entire shell in WorkspaceSlugProvider. When null (first mount before
any tab's WorkspaceRouteLayout sets it), shows a loading spinner.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): migrate old tab paths + fix shell slug deadlock
Tab store rehydration: old-format paths like "/issues/abc" (missing
workspace slug prefix) are reset to "/" so IndexRedirect picks the
correct workspace. Detection: if the first segment is a known route
name (issues, projects, etc.) rather than a workspace slug, it's an
old-format path.
Desktop shell: TabContent must always render (not gated behind slug
check) so WorkspaceRouteLayout can mount and call setCurrentWorkspace.
Only sidebar and shell-level UI (chat, modals, search) gate on slug
being present.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(agent): add custom CLI arguments support
Allow users to configure custom CLI arguments per agent that get
appended to the agent subprocess command at launch time. This enables
use cases like specifying different models (--model o3), max turns,
or other provider-specific flags without needing separate runtimes.
Changes:
- Add custom_args JSONB column to agent table (migration 041)
- Update API handler to accept/return custom_args in create/update
- Pass custom_args through claim endpoint to daemon
- Append custom_args to CLI commands for all agent backends
- Add ExecOptions.CustomArgs field in agent package
- Add Custom Args tab in agent detail UI
- Add --custom-args flag to CLI agent create/update commands
Closes MUL-802
* fix(agent): filter protocol-critical flags from custom_args
Add per-backend filtering of custom_args to prevent users from
accidentally overriding flags that the daemon hardcodes for its
communication protocol (e.g. --output-format, --input-format,
--permission-mode for Claude).
This follows the same pattern as custom_env's isBlockedEnvKey: we
only block the small, stable set of flags that would break the
daemon↔agent protocol — not every possible dangerous flag. Workspace
members are trusted for everything else.
Each backend defines its own blocked set:
- Claude: -p, --output-format, --input-format, --permission-mode
- Gemini: -p, --yolo, -o
- Codex: --listen
- OpenCode: --format
- OpenClaw: --local, --json, --session-id, --message
- Hermes: none (ACP is positional)
Includes unit tests for the filtering logic.
* fix(agent): address code review nits for custom_args
- Replace module-level `nextArgId` counter with `crypto.randomUUID()`
in custom-args-tab.tsx to avoid SSR ID conflicts
- Add unit tests for custom args passthrough and blocked-arg filtering
in both Claude and Gemini arg builders
Remove the concurrency_policy system (skip/queue/replace) — skip had an
orphan bug that permanently blocked triggers, queue didn't actually queue,
and replace didn't cancel running tasks. Every trigger now simply executes.
Bug fixes:
- Listener now handles in_review status (was silently ignored)
- Issue deletion fails linked autopilot runs before DELETE (prevents orphans)
- ComputeNextRun rejects invalid timezones instead of silent UTC fallback
- dispatchCreateIssue post-commit failures now properly fail the run
Reliability:
- Scheduler recovers lost triggers on startup (crash recovery)
- New index on autopilot_run(issue_id) for deletion lookups
- Migration 043 cleans up historical orphaned/skipped/pending runs
* feat(autopilot): add scheduled/triggered automation for AI agents
Introduce the Autopilot feature — recurring automations that assign work
to AI agents on a schedule or manual trigger. Supports two execution
modes: create_issue (creates an issue for the agent to work on) and
run_only (directly enqueues an agent task without issue pollution).
Backend: migration (3 tables + 2 columns), sqlc queries, AutopilotService
with concurrency policies (skip/queue/replace), HTTP CRUD + trigger
endpoints, background cron scheduler (30s tick), event listeners for
issue→run and task→run status sync.
Frontend: types, API client methods, TanStack Query hooks with optimistic
mutations, realtime cache invalidation, list page with create dialog,
detail page with trigger management and run history, sidebar nav + routes
for both web and desktop apps.
* feat(autopilot): improve UX — trigger config, edit dialog, template gallery
- Replace raw cron input with friendly frequency tabs (Hourly/Daily/Weekdays/Weekly/Custom), time picker, and timezone dropdown defaulting to user's local timezone
- Fix Select components showing UUIDs instead of names (Base UI render function pattern)
- Add Edit button on detail page opening a unified edit dialog
- Remove project/concurrency/issue-title-template from create/edit (simplify for users)
- Add trigger configuration inline during autopilot creation
- Add template gallery on empty state (6 step-by-step workflow templates)
- Rename "Description" to "Prompt" throughout UI
- Inject autopilot run timestamp into issue description for agent date awareness
- Treat issue status "in_review" as run completion (fixes skip on next trigger)
- Make migration idempotent with IF NOT EXISTS clauses
* feat(security): replace instant member-add with invitation acceptance flow
Users invited to a workspace must now explicitly accept the invitation
before becoming a member. This fixes the security vulnerability where
knowing someone's email was enough to auto-register their runtime to
your workspace.
Changes:
- Add workspace_invitation table with pending/accepted/declined/expired states
- Replace CreateMember with CreateInvitation (same endpoint, new behavior)
- Add accept/decline/revoke/list invitation API endpoints
- Add invitation WS events for real-time notification
- Frontend: invitation accept/decline UI in workspace switcher
- Frontend: pending invitations section in members settings tab
* fix(invitation): address PR review nits
- Fix invitation:revoked listener to send event to invitee user (was no-op)
- Remove duplicate queryClient2 in app-sidebar.tsx, reuse existing queryClient
- Add expires_at > now() filter to ListPendingInvitationsByWorkspace query
State management
- Pending task / live timeline are now Query-cache single source;
Zustand mirror removed (fixes duplicate assistant render caused by
the invalidate→refetch race window)
- WS subscriptions moved from ChatWindow to global useRealtimeSync so
pending state survives minimize and refresh
- New GET /chat/sessions/:id/pending-task to recover live state on mount
- Drafts persisted per-session (was per-workspace)
Unread tracking
- Migration 040: chat_session.unread_since (event-driven; old chats
stay clean — no mass backfill)
- POST /chat/sessions/:id/read clears unread; broadcasts
chat:session_read so other devices sync
- New GET /chat/pending-tasks aggregate for the FAB
- ChatFab: brand-color impulse animation while running, brand-dot
badge of unread session count
- ChatWindow auto-marks read when user is viewing the session
Header redesign
- Two independent dropdowns: agent (avatar + name + My/Others
grouping) at the input bottom-left; session (title + agent avatar)
in the header
- ⊕ new-chat button replaces the old + and history buttons
- Session dropdown lists all sessions across agents with avatars
- Empty state: 3 clickable starter prompts that send immediately
- Mention link renderer falls through to default span on null —
fixes @member/@agent/@all silently disappearing app-wide
- User messages render through Markdown
- Enter submits in chat input only (with IME guard + codeBlock skip);
bubble menu hidden in chat
Misc
- Partial index on agent_task_queue for fast pending-task lookup
- 2 new storage keys added to clearWorkspaceStorage
- useMarkChatSessionRead has onError rollback
- chat.* namespace logs across store, mutations, components, realtime
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add per-agent custom_env configuration that gets injected into the agent
subprocess at launch time. This enables users to configure custom API
endpoints (ANTHROPIC_BASE_URL), API keys (ANTHROPIC_API_KEY), and cloud
provider modes (CLAUDE_CODE_USE_BEDROCK, CLAUDE_CODE_USE_VERTEX) without
requiring code changes.
Changes:
- Migration 040: add custom_env JSONB column to agent table
- Backend: custom_env in agent CRUD API + claim endpoint
- Daemon: merge custom_env into subprocess environment variables
- Frontend: env var editor in agent settings (key-value pairs with
visibility toggle for sensitive values)
Closes#816
Related: #807, #809
Projects are now searchable alongside issues in the Cmd+K search dialog.
Results are grouped by type (Projects / Issues) with project icon, status,
and description snippet highlighting.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: add pin to sidebar for issues and projects
Add per-user pinning of issues and projects to the sidebar for quick access.
- New `pinned_item` table with per-user, per-workspace scoping
- REST API: GET/POST /api/pins, DELETE /api/pins/{type}/{id}, PUT /api/pins/reorder
- Sidebar "Pinned" section between Personal and Workspace nav (hidden when empty)
- Pin/unpin actions in issue and project detail dropdown menus
- Optimistic mutations with WebSocket invalidation for real-time sync
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: add drag-and-drop reordering and visible pin buttons
- Sidebar pinned items now support drag-and-drop reordering via @dnd-kit
- Add visible pin/unpin icon button in issue and project detail headers
- Add useReorderPins mutation with optimistic updates
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: remove drag handle and fix page refresh after reorder
- Remove GripVertical drag handle — whole item is now draggable, aligning
with other sidebar elements
- Prevent link navigation after drag using wasDragged ref
- Remove onSettled invalidation from reorder mutation to prevent
unnecessary refetch after optimistic update
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The idx_one_pending_task_per_issue index only allowed one pending task
per issue across all agents, causing different agents' queued/dispatched
tasks to block each other. This mismatched the code-level dedup which
checks per (issue_id, agent_id). Replace with idx_one_pending_task_per_issue_agent
on (issue_id, agent_id) so each agent can independently have one pending task.
Fixes MUL-495
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(issues): display token usage per issue in detail sidebar
Add a new "Token usage" section to the issue detail right sidebar that
shows aggregated input/output tokens, cache tokens, and run count across
all tasks for the issue. Backed by a new SQL query and API endpoint.
* fix(db): add index on agent_task_queue(issue_id) for usage queries
The GetIssueUsageSummary query joins agent_task_queue filtered by
issue_id across all statuses. The existing partial index (migration 022)
only covers queued/dispatched rows, so completed tasks require a
sequential scan. Add a general index to prevent performance degradation
as task volume grows.
* fix(search): use LOWER/LIKE instead of ILIKE for pg_bigm 1.2 compatibility
pg_bigm 1.2 on RDS does not support ILIKE index scans. Replace all
ILIKE expressions with LOWER(column) LIKE LOWER(pattern) so the GIN
indexes are utilized. Rebuild gin_bigm_ops indexes on LOWER() expressions.
Closes MUL-482
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(search): lowercase pattern in Go, add buildSearchQuery unit tests
- Lowercase phrase/terms in Go (strings.ToLower) so SQL only needs
LOWER() on the column side, avoiding redundant per-query LOWER() on
the pattern
- Add 5 unit tests for buildSearchQuery asserting SQL shape: no ILIKE,
LOWER on columns only, lowercased args, multi-term AND, number match,
include-closed flag, special char escaping
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- CancelTaskByUser: verify task belongs to current workspace for both
chat and issue tasks, preventing cross-workspace cancellation
- Log errors for TouchChatSession and CreateChatMessage instead of
silently discarding them
- Add ON DELETE CASCADE to chat_session.creator_id FK
- Add staleTime: Infinity to chat query options (project convention)
- Remove dead useSendChatMessage mutation (replaced by direct api call)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add creator ownership verification on chat session endpoints (get, archive, send, list messages)
- Add CancelTaskByUser handler with ownership check instead of unrestricted CancelTask
- Show user messages optimistically before server response
- Remove unused streamingContent from chat store and sendMessage mutation import
- Make QueryProvider devtools flag a prop instead of reading process.env in core package
- Add proper FK constraint on chat_session.creator_id → user(id)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add priority field (urgent/high/medium/low/none) to projects, matching
the existing issue priority system. Includes database migration, API
support for create/update/list filtering, and UI for the create dialog,
project list table, and project detail page.
Implement the Master Agent chat feature allowing users to chat with agents
directly from a floating window, separate from the issue-based workflow.
Backend:
- New chat_session and chat_message tables (migration 033)
- Make issue_id nullable on agent_task_queue for chat tasks
- REST API: create/list/get/archive sessions, send/list messages
- EnqueueChatTask in TaskService with session_id persistence
- WS events: chat:message, chat:done
- Daemon: chat task type with separate prompt builder
- ClaimTaskByRuntime populates chat context (session, message, repos)
Frontend:
- ChatSession/ChatMessage types + API client methods
- core/chat: TanStack Query options, mutations with optimistic updates, WS updaters
- features/chat: Zustand store, ChatFab (floating button), ChatWindow with
real-time streaming via task:message events
- Mounted in dashboard layout (bottom-right corner)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
CI uses pgvector/pgvector:pg17 which doesn't ship pg_bigm. Wrap
CREATE EXTENSION and index creation in DO/EXCEPTION blocks so the
migration succeeds without pg_bigm — indexes are skipped and search
falls back to plain LIKE scans.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add owner_id to agent_runtime table to track who registered each runtime.
Backend: new delete endpoint with role-based permissions (owner/admin can
delete any, members only their own), list filtering by owner (?owner=me),
and agent dependency check before deletion.
Frontend: Mine/All filter toggle in runtime list, owner display in list
items and detail view, delete button with AlertDialog confirmation.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(search): implement full-text search for issues
Add pg_bigm-based full-text search across issue titles and descriptions,
with API endpoint, CLI subcommand, and web Cmd+K search dialog.
- Migration 032: pg_bigm extension + GIN indexes on title/description
- Server: GET /api/issues/search?q=... with pagination and total count
- CLI: `multica issue search <query>` with table/json output
- Web: Cmd+K command palette using cmdk, with debounced search
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(search): address review feedback on search implementation
1. Escape LIKE special characters (%, _, \) in handler to prevent
matching anomalies from user input.
2. Wire AbortController signal into searchIssues fetch so in-flight
requests are actually cancelled on new input.
3. Fix offset=0 falsy check — use !== undefined instead of truthiness.
4. Merge results + count into single query using COUNT(*) OVER()
window function, eliminating the duplicate DB round-trip.
5. Exclude done/cancelled issues by default; add include_closed
parameter to API, CLI (--include-closed), and web client.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(search): default web search to include all statuses
Pass include_closed: true in the web Cmd+K search so results include
done and cancelled issues by default, matching the reviewer's request.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(search): add comment search with snippet extraction
Extend search to cover issue comments in addition to title/description.
Results are deduplicated at the issue level, with match_source and
matched_snippet fields indicating where and what matched.
- Migration 033: pg_bigm GIN index on comment.content
- SQL: EXISTS subquery for comment matching, correlated subquery for
snippet extraction, 3-tier ranking (title > description > comment)
- Server: SearchIssueResponse with match_source and matched_snippet
- Web: show comment icon + snippet below issue title when matched
- CLI: MATCH column shows source and truncated snippet
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(search): redesign search dialog to match Linear's spacious style
- Widen dialog from sm (384px) to xl (576px) with top-20% positioning
- Larger search input with icon, generous padding, and ESC hint
- Use cmdk primitives directly for full style control
- Taller result list (400px / 50vh), spacious result items (py-2.5)
- Rounded-lg items with accent highlight on selection
- Cleaner border separator between input and results
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Extract token usage from Claude Code's stream-json output in real-time
during task execution, replacing the inaccurate global JSONL log scanner.
- New `task_usage` table: tracks (task_id, provider, model) level usage
- Agent SDK: parse `message.usage` from assistant messages, accumulate
per-model and return in Result
- Daemon: convert agent usage to entries, send with CompleteTask
- Server: store usage on task completion, expose workspace-level
aggregation APIs (GET /api/usage/daily, GET /api/usage/summary)
* refactor: remove agent triggers config field
Remove the triggers field from agent configuration. The on_assign,
on_comment, and on_mention behaviors are now always enabled (hardcoded),
as decided in the Agentflow design discussion (MUL-372).
Changes:
- Database: migration 032 drops triggers column from agent table
- Backend: remove triggers from create/update agent APIs and response
- Backend: simplify trigger-checking logic to always-enabled
- Frontend: remove TriggersTab UI and AgentTrigger types
- Tests: remove trigger config unit tests (no longer configurable)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor: also remove agent tools config field
Remove the tools field from agent configuration alongside triggers.
The tools field was a placeholder — stored in the DB and shown in the
UI but never passed to the daemon or used at runtime.
- Database: migration 032 now also drops tools column
- Backend: remove tools from create/update agent APIs and response
- Frontend: remove ToolsTab UI, AgentTool type, and tools tab
- Update landing page copy
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(test): remove tools/triggers columns from test fixtures
The test fixtures still referenced the dropped tools and triggers
columns when inserting agent rows, causing CI failures.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Devv <devv@Devvs-Mac-mini.local>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(agent): replace hard delete with archive/restore
Replace agent deletion with soft archive pattern. Archived agents
are preserved in the database with all historical references intact
but cannot be assigned, mentioned, or trigger tasks.
Backend:
- Add archived_at/archived_by columns to agent table (migration 031)
- Replace DELETE /api/agents/{id} with POST /api/agents/{id}/archive
- Add POST /api/agents/{id}/restore endpoint
- ListAgents excludes archived by default (?include_archived=true to include)
- Skip archived agents in task triggers (on_assign, on_comment, on_mention)
- Block assignment to archived agents
- Cancel pending tasks on archive
- New events: agent:archived, agent:restored (replacing agent:deleted)
Frontend:
- Agent type includes archived_at/archived_by fields
- Mention autocomplete and assignee picker filter out archived agents
- Agent list shows archived agents with muted styling
- Agent detail shows archive banner with restore button
- Delete button replaced with Archive button and updated confirmation dialog
- API client: archiveAgent/restoreAgent replace deleteAgent
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(agent): self-review fixes for archive feature
- Fix: workspace store now fetches agents with include_archived=true
so archived agents are actually visible in the frontend (the archived
UI was dead code before — ListAgents excludes archived by default)
- Fix: add error logging for CancelAgentTasksByAgent in ArchiveAgent
- Fix: add idempotency guards — return 409 Conflict when archiving
an already-archived agent or restoring a non-archived agent
- Fix: revert unnecessary extra GetAgent query in ReconcileAgentStatus
(archived agents won't have running tasks after CancelAgentTasksByAgent)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Merge main to pick up 028_task_trigger_comment migration. Renumber
daemon_token migration to 029. Fix execenv tests that expected CLI hints
in issue_context.md after they were moved to CLAUDE.md.
Issue daemon auth tokens (mdt_) on pairing session claim, bound to
workspace_id + daemon_id with 1-year expiry. Add DaemonAuth middleware
that validates these tokens and falls back to JWT/PAT for backward
compatibility. Apply middleware to all daemon routes except pairing
endpoints.
* fix(auth): enforce auth middleware and workspace membership on daemon API routes
Daemon routes were registered without the Auth middleware, meaning the
server accepted unauthenticated requests to register runtimes, claim
tasks, etc. The daemon client already sends a Bearer token — the server
just wasn't validating it.
- Split /api/daemon routes: pairing-session endpoints stay public (used
before the daemon has a token), all others now require Auth middleware
- Add workspace membership check in DaemonRegister so only workspace
members can register runtimes
- Update test to include X-User-ID header matching the new auth requirement
Closes MUL-90
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor(daemon): remove dead pairing-session feature
The daemon pairing flow was never completed — the daemon authenticates
via CLI config token, not pairing sessions. Remove all related code:
- Delete daemon_pairing.go handler (4 unused handlers)
- Remove pairing routes from router.go (3 public + 1 protected)
- Delete /pair/local page + test from frontend
- Remove DaemonPairingSession types and API client methods
- Add migration 029 to drop daemon_pairing_session table
- Update LOCAL_DEVELOPMENT.md to reflect actual auth flow
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add attachment table with workspace/issue/comment associations
- Upload handler creates attachment record when workspace context exists
- Add GET /api/issues/{id}/attachments and DELETE /api/attachments/{id}
- Frontend passes issueId context during uploads for tracking
- Add Attachment type, listAttachments, deleteAttachment to API client
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Merge main to pick up 028_task_trigger_comment migration. Renumber
daemon_token migration to 029. Fix execenv tests that expected CLI hints
in issue_context.md after they were moved to CLAUDE.md.
Issue daemon auth tokens (mdt_) on pairing session claim, bound to
workspace_id + daemon_id with 1-year expiry. Add DaemonAuth middleware
that validates these tokens and falls back to JWT/PAT for backward
compatibility. Apply middleware to all daemon routes except pairing
endpoints.
- Change DB default for agent visibility from 'workspace' to 'private'
- Fix canManageAgent: workspace agents are now manageable by all members,
private agents remain restricted to owner/admin
- Add private agent visibility check to BatchAssigneePicker (was missing)
* feat(agents): reply as thread instead of top-level comment
When an agent responds to a user comment, the reply is now nested under
the triggering comment (parent_id) instead of appearing as a separate
top-level comment. Also enables on_comment trigger by default for newly
created agents.
- Add trigger_comment_id column to agent_task_queue (migration 028)
- Pass triggering comment ID through EnqueueTaskForIssue → task → createAgentComment
- Include parent_id in WebSocket broadcast for agent comments
- Default agent creation includes both on_assign and on_comment triggers
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(cli): add --parent flag to comment add for threaded replies
The agent posts comments via the CLI, so the correct fix is giving it a
--parent flag rather than wiring trigger_comment_id through the task
infrastructure. The agent reads the comment list, decides which comment
to reply to, and passes --parent <comment-id>.
- Add --parent flag to `multica issue comment add`
- Update agent runtime instructions to explain --parent usage
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(daemon): pass trigger_comment_id to agent execution context
The agent now knows which comment triggered its task and gets an explicit
instruction to reply to it using --parent. The trigger_comment_id flows
from the DB through the claim response, daemon Task struct, and into
issue_context.md where the agent sees it.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(comments): agent replies to thread root, matching frontend behavior
When the triggering comment is itself a reply (has parent_id), resolve
to the thread root so the agent's reply stays in the same flat thread.
This matches the frontend where all replies share the top-level parent.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(cli): show parent_id and full IDs in comment list
The table output now includes a PARENT column and shows full comment IDs
(not truncated) so agents can see thread structure and use --parent.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(daemon): instruct agents to always use --output json
Agents now see explicit guidance to use --output json for all read
commands, ensuring they get structured data with full IDs and parent_id
for proper threading.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(daemon): differentiate comment-trigger vs assign-trigger context
When triggered by a comment, the agent now gets clear instructions:
- Primary goal is to read and respond to the comment
- Do NOT change issue status just because you replied
- Only change status if explicitly requested
This prevents the agent from seeing "In Review" and stopping, since
it now understands the task is to reply, not to re-evaluate the issue.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(daemon): split workflow by trigger type in CLAUDE.md/AGENTS.md
The Workflow section in the agent's runtime config now shows a
comment-reply workflow when triggered by a comment (read comments,
find trigger, reply, don't change status) vs the full assignment
workflow (set in_progress, do work, set in_review).
Previously the agent always saw the assignment workflow, causing it
to check the issue status, see "In Review", and stop without reading
or replying to the triggering comment.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor(daemon): remove duplicate workflow from issue_context.md
Workflow instructions now live only in CLAUDE.md/AGENTS.md (runtime_config.go).
issue_context.md keeps just the task data: issue ID, trigger type, and
triggering comment ID.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(task): skip duplicate comment on completion for comment-triggered tasks
When triggered by a comment, the agent posts its own reply via CLI
with --parent. The task completion path was also creating a comment
from the agent's stdout output, resulting in duplicates. Now only
assignment-triggered tasks auto-post output as a comment. Error
messages from FailTask are still posted regardless of trigger type.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When an agent is working on an issue, users can now see real-time output
in the issue detail page instead of waiting for completion.
Backend:
- Add task_message table and migration for persisting agent messages
- Add POST /api/daemon/tasks/{id}/messages endpoint for daemon to report
structured messages (tool_use, tool_result, text, error) in batches
- Add GET /api/daemon/tasks/{id}/messages for catch-up after reconnect
- Add GET /api/issues/{id}/active-task to check for running tasks
- Broadcast task:message events via WebSocket
- Daemon forwards agent session messages with 500ms text throttling
Frontend:
- Add AgentLiveCard component showing live tool calls, text output,
and progress indicators with auto-scroll
- Wire into issue detail timeline with WS subscription and HTTP catch-up
- Card appears when agent is working, disappears on completion/failure
