- TrimSpace incoming repoURL in ensureRepoReady to prevent unnecessary
server refreshes when CLI passes URLs with whitespace
- Add comment on reposVersion field clarifying it is stored for future
version-based skip optimization
- Add concurrency safety comment on syncWorkspacesFromAPI skip logic
- Add test for URL trimming fast-path behavior
* feat(server): trigger agent when issue moves out of backlog
When a member moves an agent-assigned issue from "backlog" to an active
status (e.g. "todo", "in_progress"), enqueue an agent task so the agent
starts working. This lets backlog act as a parking lot where issues can
be assigned to agents without immediately triggering execution.
Applies to both single and batch issue updates.
* fix(server): treat backlog as parking lot — no trigger on create/assign
Address review feedback: creating or assigning an agent to a backlog
issue no longer triggers immediate execution. Only moving out of backlog
to an active status triggers the agent, producing exactly one task.
- shouldEnqueueAgentTask now gates on backlog status
- backlog→active trigger uses isAgentAssigneeReady directly
- Added TestBacklogNoTriggerOnCreate test
- Updated TestBacklogToTodoTriggersAgent to assert exactly 1 task
across the full create→move path (no manual cleanup)
* feat(ui): show toast hint when assigning agent to backlog issue
Users may not know that backlog issues won't trigger agent execution
until moved to an active status. Show an actionable toast with a
"Move to Todo" button when:
- Assigning an agent to a backlog issue in the detail page
- Creating a backlog issue with an agent assignee
* feat(ui): add "Don't show again" option to backlog agent toast
Users who understand the backlog parking lot behavior can dismiss the
hint permanently. Uses localStorage to persist the preference.
* feat(ui): replace backlog agent toast with AlertDialog
Use a modal dialog instead of a toast notification so users must
explicitly acknowledge the hint. The dialog offers three options:
- "Move to Todo" — changes status and triggers the agent
- "Keep in Backlog" — dismisses without action
- "Don't show again" — persists dismissal in localStorage
* fix(ui): improve backlog agent dialog
* fix(ui): close create dialog behind hint, use checkbox for don't-show-again
1. Create Issue dialog now closes when the backlog agent hint appears,
so only the hint dialog is visible (not stacked behind).
2. "Don't show again" is now a checkbox instead of a separate button.
When checked, clicking either "Keep in Backlog" or "Move to Todo"
persists the preference.
* fix(ui): smooth backlog agent hint dialog
* fix(test): add useUpdateIssue mock to create-issue test
The test mock for @multica/core/issues/mutations was missing the
useUpdateIssue export that create-issue.tsx now imports, causing
CI failure.
GoReleaser produces .zip for Windows and .tar.gz for other platforms,
but the update command hardcoded .tar.gz for all platforms, causing a
404 error on Windows.
- Select .zip extension when runtime.GOOS is "windows"
- Add extractBinaryFromZip() for zip archive extraction
- Use "multica.exe" as the binary name on Windows
Closes#1072
* feat(agent): add custom CLI arguments support
Allow users to configure custom CLI arguments per agent that get
appended to the agent subprocess command at launch time. This enables
use cases like specifying different models (--model o3), max turns,
or other provider-specific flags without needing separate runtimes.
Changes:
- Add custom_args JSONB column to agent table (migration 041)
- Update API handler to accept/return custom_args in create/update
- Pass custom_args through claim endpoint to daemon
- Append custom_args to CLI commands for all agent backends
- Add ExecOptions.CustomArgs field in agent package
- Add Custom Args tab in agent detail UI
- Add --custom-args flag to CLI agent create/update commands
Closes MUL-802
* fix(agent): filter protocol-critical flags from custom_args
Add per-backend filtering of custom_args to prevent users from
accidentally overriding flags that the daemon hardcodes for its
communication protocol (e.g. --output-format, --input-format,
--permission-mode for Claude).
This follows the same pattern as custom_env's isBlockedEnvKey: we
only block the small, stable set of flags that would break the
daemon↔agent protocol — not every possible dangerous flag. Workspace
members are trusted for everything else.
Each backend defines its own blocked set:
- Claude: -p, --output-format, --input-format, --permission-mode
- Gemini: -p, --yolo, -o
- Codex: --listen
- OpenCode: --format
- OpenClaw: --local, --json, --session-id, --message
- Hermes: none (ACP is positional)
Includes unit tests for the filtering logic.
* fix(agent): address code review nits for custom_args
- Replace module-level `nextArgId` counter with `crypto.randomUUID()`
in custom-args-tab.tsx to avoid SSR ID conflicts
- Add unit tests for custom args passthrough and blocked-arg filtering
in both Claude and Gemini arg builders
Issue list JSON now includes total, limit, offset, has_more fields so agents
can detect truncated results and paginate. Also documents --limit/--offset in
the agent prompt and emphasizes mention format in Output section.
Closes MUL-837
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Remove the concurrency_policy system (skip/queue/replace) — skip had an
orphan bug that permanently blocked triggers, queue didn't actually queue,
and replace didn't cancel running tasks. Every trigger now simply executes.
Bug fixes:
- Listener now handles in_review status (was silently ignored)
- Issue deletion fails linked autopilot runs before DELETE (prevents orphans)
- ComputeNextRun rejects invalid timezones instead of silent UTC fallback
- dispatchCreateIssue post-commit failures now properly fail the run
Reliability:
- Scheduler recovers lost triggers on startup (crash recovery)
- New index on autopilot_run(issue_id) for deletion lookups
- Migration 043 cleans up historical orphaned/skipped/pending runs
* fix(agent): restrict custom_env visibility to agent owner and workspace admin
Agent environment variables (custom_env) were visible to all workspace
members, exposing sensitive tokens. Now only the agent owner and
workspace owner/admin can view them — regular members receive the field
omitted (null) from API responses, and the frontend hides the
Environment tab accordingly.
Closes#1018
* fix(agent): show masked env keys to non-authorized users instead of hiding tab
Instead of completely hiding the Environment tab for non-owner/non-admin
users, show the variable keys with masked values (****) in a read-only
view. This lets members see which variables are configured without
exposing the actual values.
- Backend: mask values with "****" instead of nullifying custom_env
- Added custom_env_redacted boolean to API response
- Frontend: EnvTab supports readOnly mode with lock icon and muted styling
* feat(desktop): restart local daemon when bundled CLI version differs
Desktop bundles a multica CLI binary at build time via bundle-cli.mjs.
If a local daemon is already running from a previous session with an
older CLI, the newly bundled version never takes effect until the user
manually restarts. Fix that on the login/auto-start path.
- Expose the daemon's CLI version on GET /health as cli_version (sourced
from cfg.CLIVersion, which is already set from the ldflag at daemon
startup in cmd_daemon.go).
- In the desktop main process, query the resolved CLI binary's version
once via `multica version --output json` and cache it for the process
lifetime.
- On daemon:auto-start, if the daemon is already running, compare the
two versions. Restart only when BOTH sides are known and the strings
differ — a restart kills in-flight agent tasks, so any uncertainty
(bundled CLI unknown, older daemon without cli_version field, read
failure) fails safe and leaves the daemon alone.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(daemon): defer version-mismatch restart until active tasks drain
Previous iteration restarted the daemon immediately on a confirmed CLI
version mismatch, which would kill any agent tasks mid-execution. Gate
the restart on an active-task counter so in-flight work always finishes.
- Daemon: add `activeTasks atomic.Int64` on the Daemon struct,
increment/decrement it around handleTask, and expose it as
`active_task_count` on GET /health.
- Desktop: when a version mismatch is confirmed but active_task_count >
0, set a pendingVersionRestart flag instead of restarting. The 5s
pollOnce loop retries ensureRunningDaemonVersionMatches on each tick
and fires the restart the moment the count drops to 0.
- Eventual consistency: if the user keeps the daemon permanently busy,
the version stays out of date — that's a strictly better failure mode
than silently killing hour-long agent runs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* test(daemon): cover version-check decision + /health counter exposure
Addresses the test-coverage gap from the second review.
- Go: extract the /health handler into a named method `(d *Daemon)
healthHandler(startedAt time.Time)` so it can be exercised via
httptest without spinning up a listener. Add health_test.go covering
cli_version + active_task_count field exposure and the increment /
decrement protocol used by pollLoop.
- Desktop: extract the pure version-check decision logic into
version-decision.ts (no electron, no I/O, no module state). The
ensureRunningDaemonVersionMatches wrapper now delegates the "what
should we do" decision to decideVersionAction and owns only the side
effects (logging, flag mutation, restartDaemon call).
- Desktop: bolt vitest onto apps/desktop (vitest.config.ts + catalog
devDep + test script) so main-process unit tests have a home. Add
version-decision.test.ts covering all four action branches and the
busy→idle drain transition.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(daemon): bust CLI version cache on retry-install, lock wire-level JSON keys
Two polish items from review.
- daemon:retry-install now also clears cachedCliBinaryVersion. Previously
a retry that landed a newly-downloaded CLI at a different version
would false-negative on the next version check because the cached
version string was sticky for the process lifetime.
- TestHealthHandlerReportsCLIVersionAndActiveTaskCount now decodes into
a raw map[string]any and asserts the exact snake_case keys
(cli_version, active_task_count, status). The desktop TS client keys
on these literal strings, so a silent struct-tag rename must fail the
test. Typed struct round-trip kept as a separate value check.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The daemon now automatically watches all workspaces the user belongs to,
fetched directly from the API. This removes the manual watch/unwatch
workflow, the config-based watched/unwatched lists, the /watch HTTP
endpoints, the CLI watch/unwatch commands, and the desktop app's watched
workspace UI and reconciliation logic.
Co-authored-by: Devv <devv@Devvs-Mac-mini.local>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add GET /api/config endpoint exposing cdn_domain from CLOUDFRONT_DOMAIN
- Create packages/core/config/ zustand store, fetched at app startup
- Extract file card preprocessing to packages/ui/markdown/file-cards.ts
with isCdnUrl(url, cdnDomain) using exact hostname match
- Add file card support to packages/ui/markdown/Markdown.tsx (was missing)
- Remove hardcoded .copilothub.ai hostname check from file-card.tsx
- Fix LocalStorage.CdnDomain() to return hostname not full URL
- Always run preprocessFileCards regardless of cdnDomain availability
(!file syntax works without CDN domain, only legacy matching needs it)
- Use useConfigStore hook in common/markdown.tsx for reactive updates
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(autopilot): add scheduled/triggered automation for AI agents
Introduce the Autopilot feature — recurring automations that assign work
to AI agents on a schedule or manual trigger. Supports two execution
modes: create_issue (creates an issue for the agent to work on) and
run_only (directly enqueues an agent task without issue pollution).
Backend: migration (3 tables + 2 columns), sqlc queries, AutopilotService
with concurrency policies (skip/queue/replace), HTTP CRUD + trigger
endpoints, background cron scheduler (30s tick), event listeners for
issue→run and task→run status sync.
Frontend: types, API client methods, TanStack Query hooks with optimistic
mutations, realtime cache invalidation, list page with create dialog,
detail page with trigger management and run history, sidebar nav + routes
for both web and desktop apps.
* feat(autopilot): improve UX — trigger config, edit dialog, template gallery
- Replace raw cron input with friendly frequency tabs (Hourly/Daily/Weekdays/Weekly/Custom), time picker, and timezone dropdown defaulting to user's local timezone
- Fix Select components showing UUIDs instead of names (Base UI render function pattern)
- Add Edit button on detail page opening a unified edit dialog
- Remove project/concurrency/issue-title-template from create/edit (simplify for users)
- Add trigger configuration inline during autopilot creation
- Add template gallery on empty state (6 step-by-step workflow templates)
- Rename "Description" to "Prompt" throughout UI
- Inject autopilot run timestamp into issue description for agent date awareness
- Treat issue status "in_review" as run completion (fixes skip on next trigger)
- Make migration idempotent with IF NOT EXISTS clauses
The email CTA now deep-links to /invite/{id} instead of the generic app
URL. If the user isn't logged in, they're redirected to login with a
?next= param that brings them back to the invite page.
Changes:
- Backend: GET /api/invitations/{id} endpoint (enriched with workspace/inviter names)
- Backend: Email template now links to /invite/{invitationId}
- Frontend: Shared InvitePage component (packages/views/invite/)
- Frontend: Web route at (auth)/invite/[id], Desktop route at invite/:id
- Frontend: /invite/ excluded from navigation history persistence
Uses the existing Resend email service to notify invitees.
Email includes inviter name, workspace name, and a link to the app.
Sent fire-and-forget in a goroutine to avoid blocking the API response.
* feat(security): replace instant member-add with invitation acceptance flow
Users invited to a workspace must now explicitly accept the invitation
before becoming a member. This fixes the security vulnerability where
knowing someone's email was enough to auto-register their runtime to
your workspace.
Changes:
- Add workspace_invitation table with pending/accepted/declined/expired states
- Replace CreateMember with CreateInvitation (same endpoint, new behavior)
- Add accept/decline/revoke/list invitation API endpoints
- Add invitation WS events for real-time notification
- Frontend: invitation accept/decline UI in workspace switcher
- Frontend: pending invitations section in members settings tab
* fix(invitation): address PR review nits
- Fix invitation:revoked listener to send event to invitee user (was no-op)
- Remove duplicate queryClient2 in app-sidebar.tsx, reuse existing queryClient
- Add expires_at > now() filter to ListPendingInvitationsByWorkspace query
Remove admin/owner-only restriction from skill creation and import routes.
Add canManageSkill helper that lets skill creators manage their own skills,
matching the existing canManageAgent pattern for agents.
Without a heartbeat, dead or silently-dropped WebSocket connections are
not detected until the next write fails. This causes goroutine and memory
leaks for each stale client, and breaks real-time updates for users whose
connections are dropped by a load balancer or proxy idle timeout (e.g.
Nginx default 60s, AWS ALB default 60s) without a TCP RST.
This commit applies the standard gorilla/websocket keepalive pattern:
- writePump sends a ping frame every pingPeriod (54 s) using a ticker.
The ticker replaces the simple range-over-channel loop with a select,
which also adds a proper write deadline on every write operation.
- readPump installs a pong handler that resets the read deadline on each
pong, keeping healthy connections alive indefinitely. A connection
that misses a pong is detected within pongWait (60 s) and closed,
which causes readPump to exit and send the client to hub.unregister
for clean removal.
Timing constants:
writeWait = 10 s (per-write deadline, prevents hung writers)
pongWait = 60 s (max silence before declaring a connection dead)
pingPeriod = 54 s (ping interval, 90 % of pongWait)
Also adds user_id and workspace_id to the write-error log line so that
connection problems can be attributed to a specific client in production.
All existing hub tests continue to pass unchanged.
Signed-off-by: Asish Kumar <officialasishkumar@gmail.com>
When the CLI config has no watched workspaces (e.g. fresh desktop app
install), loadWatchedWorkspaces returns successfully but registers zero
runtimes. The runtime check immediately after fails with "no runtimes
registered" before workspaceSyncLoop gets a chance to discover
workspaces from the API.
Run one sync cycle inline when the watched list is empty so the daemon
can bootstrap itself without a pre-configured workspace list.
* feat(desktop): add daemon management panel with sidebar status bar
Integrate multica daemon lifecycle management into the desktop app so
users can start/stop/restart the daemon and view live logs without
leaving the UI. Session tokens are automatically synced to the CLI
config file, making daemon authentication transparent.
- daemon-manager.ts: Electron main process module for daemon lifecycle
(health polling, start/stop via CLI, token sync, log tail)
- Preload bridge: new daemonAPI with IPC for all daemon operations
- Sidebar bottomSlot: persistent daemon status indicator in sidebar
footer (desktop-only, injected via AppSidebar slot)
- Daemon panel Sheet: right-side drawer with status details, controls,
and real-time log viewer with auto-scroll and level coloring
- Token sync: on login and app startup, JWT is written to
~/.multica/config.json so daemon can authenticate seamlessly
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(desktop): add P1+P2 daemon features — runtimes card, auto-start, settings
P1: Runtimes page Local Daemon card
- Add topSlot prop to shared RuntimesPage for platform injection
- DaemonRuntimeCard shows status, agents, uptime with Start/Stop/
Restart/Logs buttons (desktop-only, injected via slot)
P2: Auto-start and auto-stop
- Daemon auto-starts on app launch when user is authenticated
(controlled by autoStart preference, default: true)
- Daemon auto-stops on app quit (controlled by autoStop preference,
default: false — daemon keeps running in background by default)
- Preferences persisted to ~/.multica/desktop_prefs.json
P2: Daemon settings tab
- New "Daemon" tab in Settings > My Account section (desktop-only)
- Toggle auto-start and auto-stop behavior
- CLI installation status check with link to install guide
- SettingsPage gains extraAccountTabs prop for platform injection
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): address PR review feedback on daemon management
Must-fix:
- before-quit handler now calls event.preventDefault(), awaits
stopDaemon(), then re-calls app.quit() so the daemon actually
stops before the app exits
- Add concurrency guard (operationInProgress lock) in daemon-manager
to reject overlapping start/stop/restart IPC calls
- Extract shared types (DaemonState, DaemonStatus, DaemonPrefs),
constants (STATE_COLORS, STATE_LABELS), and formatUptime to
apps/desktop/src/shared/daemon-types.ts — all renderer components
now import from this single source
Should-fix:
- Log viewer uses monotonic counter (LogEntry.id) instead of array
index as React key, preventing full re-renders on overflow
- All start/stop/restart handlers now show toast.error() with the
error message when the operation fails
- startLogTail retries up to 5 times with 2s delay when the log
file doesn't exist yet (handles first-run case)
Minor:
- Cache findCliBinary() result after first successful lookup
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(logger): suppress ANSI color codes when stderr is not a TTY
Detect whether stderr is connected to a terminal and set tint's NoColor
option accordingly. Previously daemon.log files contained raw escape
sequences like \033[2m and \033[92m which made them unreadable in the
Desktop log viewer and any non-TTY sink (docker logs, systemd, etc).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(daemon): runtime watch/unwatch HTTP endpoints and denylist
Add GET/POST/DELETE /watch handlers on the daemon's health port so
clients (notably Desktop) can add or remove watched workspaces at
runtime without restarting the daemon or editing config.json. Each
handler updates in-memory state under d.mu and persists back to
~/.multica/profiles/<name>/config.json for survival across restarts.
- CLIConfig gains UnwatchedWorkspaces as an explicit opt-out denylist.
syncWorkspacesFromAPI skips entries in the denylist so a manual
unwatch isn't silently revived 30s later by the periodic sync.
- loadWatchedWorkspaces tolerates an empty config and returns nil
instead of erroring out, because Desktop starts daemons with a
fresh profile and relies on the sync loop / watch endpoint to
populate the list.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(desktop): bundled CLI, per-backend profile, and watch UI
Make the Desktop app self-sufficient: it bundles its own multica
binary, manages its own daemon profile keyed by the backend URL, and
authenticates that daemon with a long-lived PAT it mints on first
login. The daemon panel gains a checkbox list of watched workspaces
and surfaces the active profile + server URL.
CLI bootstrap
- scripts/bundle-cli.mjs copies server/bin/multica into
apps/desktop/resources/bin/ before electron-vite dev and
electron-builder package. asarUnpack: resources/** already covers
this path, so the binary ships with the .app in prod.
- main/cli-bootstrap.ts adds an ensureManagedCli() fallback that
downloads the latest release from GitHub when no bundled binary
exists (first launch on a machine without developer tooling).
- daemon-manager.resolveCliBinary prefers bundled > managed > download
> PATH, so local iteration uses the freshly built binary.
Daemon profile
- resolveActiveProfile now derives a desktop-<host> profile name from
the target API URL and creates its config.json on demand. Never
reads or writes the user's hand-configured CLI profiles, avoiding
the "Desktop polluted my default profile" class of bug.
- syncToken detects a JWT input and exchanges it for a PAT via
POST /api/tokens; caches the resulting mul_* token in the profile
config so subsequent launches skip the round-trip.
- startDaemon / stopDaemon / log tail all operate on the resolved
profile; renderer sets the target URL via a new
daemon:set-target-api-url IPC.
Workspace watching
- daemon-manager exposes daemon:list-watched / daemon:watch-workspace /
daemon:unwatch-workspace IPCs backed by the daemon's new /watch
endpoints.
- App.tsx reconciles the user's workspace list against the daemon's
watched set whenever TanStack Query updates it — new workspaces are
registered instantly instead of waiting for the daemon's 30s sync,
and removed workspaces are unwatched.
- daemon-panel gains a "Watched Workspaces" section with per-workspace
checkboxes that call watch/unwatch directly. Opt-outs persist in the
profile's unwatched_workspaces denylist.
Lifecycle states + UI
- DaemonStatus gains `profile`, `serverUrl`, and an `installing_cli`
state. Panel shows Profile / Server info rows and a "Setting up…"
blurb during first-run CLI download; failure surfaces a Retry button.
- Status bar renders a spinner during installation and hides the Start
button until setup finishes.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): register /onboarding route
The create-workspace modal navigates to /onboarding on success, but
the Desktop router only had flat routes (issues, projects, runtimes,
etc.) — resulting in an "Unexpected Application Error! 404 Not Found"
page after creating a new workspace.
Mirror the web app's wiring: render OnboardingWizard with onComplete
pushing to /issues, via the shared navigation adapter.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor(desktop): remove sidebar daemon status bar
Drop the bottom-left daemon indicator in favor of the DaemonRuntimeCard
at the top of the Runtimes page, which already shows the same info
plus full Start/Stop/Restart controls and the Logs entry point. A
single canonical place avoids fragmenting daemon status across the UI.
Also remove the now-unused `bottomSlot` prop from AppSidebar — Desktop
was the only consumer, Web never needed it, so keeping it would be
dead scaffolding.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): daemon panel layout and close button
- Logs section now fills the remaining vertical space down to the
sheet bottom instead of being capped at h-64, which left a huge
empty area below it. Top section (status, actions, watched list)
keeps natural height as shrink-0; the watched list gets its own
max-h-48 scroll so a long list can't push Logs off screen.
- Replace the Sheet's built-in close button with an explicit
<button> wired directly to onOpenChange(false). The Base UI
Dialog.Close wrapped in Button via the render prop wasn't firing
on click in this panel; going straight through the controlled
state guarantees it responds.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): make daemon panel clickable inside Electron drag region
The sheet opens at the top of the window, which visually overlaps the
TabBar's -webkit-app-region: drag zone. Even though the sheet portals
to document.body, Chromium computes drag regions over the final
composited pixels, so the sheet inherited "drag" and swallowed the
mouseup of every click (mousedown fired but click never resolved) —
including the X close button.
Mark the entire SheetContent popup with -webkit-app-region: no-drag
to subtract it from the drag region. This also fixes future buttons /
checkboxes inside the sheet that would have hit the same issue.
While here, move the close button into the SheetHeader as a flex
sibling of SheetTitle instead of an absolutely positioned overlay —
simpler layout and avoids any stacking-context weirdness.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(desktop): clickable daemon runtime card row
The whole Local Daemon row now opens the sheet panel — icon, title,
and status line are all part of one click target. This replaces the
standalone "Logs" button, which was redundant now that clicking
anywhere on the row does the same thing.
The right-side action cluster (Start / Stop / Restart) wraps its
onClick in stopPropagation so pressing those buttons doesn't bubble
up and open the panel.
Keyboard access: Enter / Space on the focused row opens the panel,
with a focus-visible background for feedback.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(runtimes): mark Desktop-launched daemons as managed
When the Multica Desktop app spawns the CLI it ships with, the
resulting daemon shares its binary with the Electron bundle — Desktop
is responsible for updating that binary on every release. Letting the
daemon self-update would just get clobbered on the next Desktop launch
and could brick the embedded binary mid-update.
Propagate a "launched_by" signal end-to-end so the UI can hide the
CLI self-update affordance (and the daemon refuses updates as a second
line of defense):
- Desktop's startDaemon spawns execFile with env MULTICA_LAUNCHED_BY=desktop.
- daemon.Config gains LaunchedBy; cmd_daemon reads the env var on boot.
- registerRuntimesForWorkspace includes launched_by in the request body.
- Server DaemonRegister folds launched_by into runtime.metadata (JSONB
— no migration needed).
- handleUpdate returns a "failed" status with an explanatory message
when LaunchedBy == "desktop", so even a bypass API call can't trigger
the self-update path.
- RuntimeDetail extracts metadata.launched_by and passes it to
UpdateSection, which swaps the Latest / → available / Update button
cluster for a muted "Managed by Desktop" label.
CLI-only users (brew install, direct tarball) keep the exact same
behavior — the env var is empty, the UI shows the update button,
the daemon still self-updates on request.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): harden daemon manager from PR review
- syncToken now takes userId and mints a fresh PAT on user switch,
restarting a running daemon so it picks up the new credentials.
A .desktop-user-id sidecar in each profile records the owner so a
previous user's cached PAT can't be reused on the next login.
- App.tsx wires onLogout on CoreProvider to daemonAPI.clearToken()
and daemonAPI.stop() so the cached PAT and live daemon don't
outlive the session.
- startLogTail replaced with a cross-platform watchFile
implementation (initial 32 KB window + poll for new bytes,
handles truncation). spawn("tail") was broken on Windows.
- writeProfileConfig now serializes through a promise chain to
prevent concurrent writes from corrupting config.json.
- startDaemon keeps the "starting" state until pollOnce confirms
/health, avoiding a running → stopped flash when the Go daemon
isn't yet listening after the supervisor returns.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): verify downloaded CLI against checksums.txt
Download goreleaser's checksums.txt alongside the release archive,
parse the sha256 lookup, stream the archive through createHash, and
refuse to install on mismatch or missing entry. Closes the supply-
chain gap where auto-install would execute an unverified binary on
first launch.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* chore(desktop): lint and style cleanups from PR review
- eslint.config.mjs: add scripts/**/*.{mjs,js} override with
globals.node so bundle-cli.mjs lints clean (was erroring on
undefined process/console).
- daemon-panel.tsx: log level classes now use semantic tokens
(text-info, text-warning, text-destructive) instead of hardcoded
Tailwind colors; escape the apostrophe in the retry copy.
- daemon-settings-tab.tsx: import DaemonPrefs from shared/daemon-
types instead of redefining it.
- runtimes-page.tsx: fix indentation inside the new topSlot wrapper.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Devv <devv@Devvs-Mac-mini.local>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Co-authored-by: yushen <ldnvnbl@gmail.com>
State management
- Pending task / live timeline are now Query-cache single source;
Zustand mirror removed (fixes duplicate assistant render caused by
the invalidate→refetch race window)
- WS subscriptions moved from ChatWindow to global useRealtimeSync so
pending state survives minimize and refresh
- New GET /chat/sessions/:id/pending-task to recover live state on mount
- Drafts persisted per-session (was per-workspace)
Unread tracking
- Migration 040: chat_session.unread_since (event-driven; old chats
stay clean — no mass backfill)
- POST /chat/sessions/:id/read clears unread; broadcasts
chat:session_read so other devices sync
- New GET /chat/pending-tasks aggregate for the FAB
- ChatFab: brand-color impulse animation while running, brand-dot
badge of unread session count
- ChatWindow auto-marks read when user is viewing the session
Header redesign
- Two independent dropdowns: agent (avatar + name + My/Others
grouping) at the input bottom-left; session (title + agent avatar)
in the header
- ⊕ new-chat button replaces the old + and history buttons
- Session dropdown lists all sessions across agents with avatars
- Empty state: 3 clickable starter prompts that send immediately
- Mention link renderer falls through to default span on null —
fixes @member/@agent/@all silently disappearing app-wide
- User messages render through Markdown
- Enter submits in chat input only (with IME guard + codeBlock skip);
bubble menu hidden in chat
Misc
- Partial index on agent_task_queue for fast pending-task lookup
- 2 new storage keys added to clearWorkspaceStorage
- useMarkChatSessionRead has onError rollback
- chat.* namespace logs across store, mutations, components, realtime
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When a member replies in a member-started thread without @mentioning the
assigned agent, the on_comment trigger was suppressed — even if the agent
had already replied in that thread. This meant the common flow of
"member posts → agent replies → member follows up" would not re-trigger
the agent on the follow-up.
Add HasAgentRepliedInThread SQL query and check it in isReplyToMemberThread
so that agent participation in a thread is treated as an ongoing conversation.
When a comment-triggered task resumes an existing session, the agent
may mistake the new comment for a previous one and skip it. Add [NEW
COMMENT] tag to the prompt and reinforce in AGENTS.md workflow that
the agent must respond to THIS specific comment, not prior ones.
When a task finishes between the UI rendering the Stop button and the
user clicking it, CancelAgentTask returns no rows. Previously this
surfaced as a 400 error. Now CancelTask checks for pgx.ErrNoRows and
returns the current task state instead of an error.
Closes#954
When an agent CLI process hangs (e.g. a tool call blocks on unreachable
I/O), the daemon's scanner blocks indefinitely on stdout, preventing the
Result from ever being sent. This causes tasks to stay in "running"
state permanently with no further events.
Three-layer fix:
1. Agent backends (claude, opencode, openclaw, gemini): add a watchdog
goroutine that closes the stdout/stderr pipe when the context is
cancelled, forcing the scanner to unblock. Also set cmd.WaitDelay
so Go force-closes pipes after 10s if the process doesn't exit.
2. daemon executeAndDrain: add an independent drain timeout (backend
timeout + 30s buffer) with context-aware select on both the message
channel and the result channel, so the daemon never blocks forever.
3. daemon ping path: add context-aware select so pings don't deadlock
if the agent backend stalls.
Closes#925
Co-authored-by: Devv <devv@Devvs-Mac-mini.local>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(daemon): prevent duplicate runtime registration on profile switch
The daemon_id included a profile name suffix (e.g. "hostname-staging"),
so switching profiles created a new daemon_id that bypassed the UPSERT
dedup constraint, leaving orphaned runtime records in the database.
Three changes:
- Remove profile suffix from daemon_id — use stable hostname only.
The unique constraint (workspace_id, daemon_id, provider) already
prevents collisions within the same workspace.
- Auto-migrate agents from old offline runtimes to the newly registered
runtime during DaemonRegister (same workspace/provider/owner).
- Add TTL-based GC in the runtime sweeper to delete offline runtimes
with no active agents after 7 days.
Closes MUL-695
* fix(daemon): address code review issues on PR #906
1. Move gcRuntimes() to the main sweep loop — previously it was inside
sweepStaleRuntimes() after an early return, so it only ran when new
runtimes were marked stale. Now it runs every sweep cycle independently.
2. Fix DeleteStaleOfflineRuntimes to exclude runtimes with ANY agent
reference (not just active ones). The FK agent.runtime_id is ON DELETE
RESTRICT, so archived agents also block deletion.
3. Scope MigrateAgentsToRuntime to the same machine by matching
daemon_id LIKE '<current_daemon_id>-%'. This prevents cross-machine
agent migration when the same user has multiple devices.
* fix(daemon): use runtime's owner_id for agent migration, not caller's
The migration was gated on ownerID.Valid which is only true for PAT/JWT
registrations. Daemon token registrations (the common case for background
daemon restarts) had ownerID as zero, skipping migration entirely.
Fix: use registered.OwnerID (preserved via COALESCE on upsert) instead
of the caller's ownerID. This ensures migration runs even when the daemon
re-registers via daemon token after an upgrade.
When a user cancels an issue, active agent tasks now get cancelled
automatically. Previously, task cancellation only triggered on assignee
changes — the cancelled status was incorrectly treated like any other
agent-managed status transition.
Closes#926
* fix(storage): scope S3 upload keys by workspace
Upload keys now use `workspaces/{workspace_id}/{uuid}.{ext}` instead of
flat `{uuid}.{ext}`, isolating file storage per workspace. Files uploaded
without workspace context (e.g. avatars) keep the flat key structure.
Refs: MUL-577
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(storage): scope user uploads under users/{user_id}/ prefix
Non-workspace uploads (avatars, profile images) now use
`users/{user_id}/{uuid}.{ext}` instead of flat `{uuid}.{ext}`,
matching the workspace-scoped pattern from the previous commit.
Refs: MUL-577
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(storage): fix LocalStorage for nested key paths
- Add MkdirAll before WriteFile to create intermediate directories
for workspace/user-scoped keys
- Fix KeyFromURL to preserve full path after /uploads/ prefix instead
of stripping to just the filename
- Update tests to match new behavior
Refs: MUL-577
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(upload): validate ownership before writing to storage
Move Storage.Upload after issue_id/comment_id ownership validation
to prevent orphaned files in S3 when validation fails. Previously,
the file was uploaded first and validation happened after, leaving
files in workspace-scoped S3 prefixes even on rejected requests.
Refs: MUL-577
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(upload): restore workspace membership check before upload
The membership check was accidentally removed during the upload
reordering refactor. Without it, any authenticated user could upload
files to any workspace by setting the X-Workspace-ID header.
Also restores the comment explaining the 200-on-DB-error behavior.
Refs: MUL-577
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Devv <devv@Devvs-Mac-mini.local>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(server): validate workspace membership for subscription targets and file uploads
Closes MED-1 (cross-workspace subscription injection) and MED-2 (file upload
missing workspace member validation) from the security audit.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* test(server): add negative tests for cross-workspace subscription and upload
Address PR review feedback:
- Add tests verifying cross-workspace user_id is rejected with 403 on
subscribe and unsubscribe
- Add test verifying upload with foreign workspace_id is rejected with 403
- Make isWorkspaceEntity explicitly enumerate "member"/"agent" and reject
unknown user types
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Devv <devv@Devvs-Mac-mini.local>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(daemon): prevent duplicate runtime registration on profile switch
The daemon_id included a profile name suffix (e.g. "hostname-staging"),
so switching profiles created a new daemon_id that bypassed the UPSERT
dedup constraint, leaving orphaned runtime records in the database.
Three changes:
- Remove profile suffix from daemon_id — use stable hostname only.
The unique constraint (workspace_id, daemon_id, provider) already
prevents collisions within the same workspace.
- Auto-migrate agents from old offline runtimes to the newly registered
runtime during DaemonRegister (same workspace/provider/owner).
- Add TTL-based GC in the runtime sweeper to delete offline runtimes
with no active agents after 7 days.
Closes MUL-695
* fix(daemon): address code review issues on PR #906
1. Move gcRuntimes() to the main sweep loop — previously it was inside
sweepStaleRuntimes() after an early return, so it only ran when new
runtimes were marked stale. Now it runs every sweep cycle independently.
2. Fix DeleteStaleOfflineRuntimes to exclude runtimes with ANY agent
reference (not just active ones). The FK agent.runtime_id is ON DELETE
RESTRICT, so archived agents also block deletion.
3. Scope MigrateAgentsToRuntime to the same machine by matching
daemon_id LIKE '<current_daemon_id>-%'. This prevents cross-machine
agent migration when the same user has multiple devices.
* fix(auth): detect cookie-based session during CLI setup flow
When users run `multica setup` after logging into multica.ai, the CLI
redirects to the login page which only checked localStorage for an
existing session. Since the web app stores auth tokens as HttpOnly
cookies (not localStorage), the session was never detected and users
had to log in again.
Now the login page also tries `api.getMe()` (which sends the HttpOnly
cookie automatically) when no localStorage token exists. A new
`POST /api/cli-token` endpoint lets cookie-authenticated sessions
obtain a bearer token to hand off to the CLI.
* fix(auth): prioritise cookie auth over localStorage in CLI setup flow
Address code review feedback: cookie-first detection avoids authorising
the CLI with a stale or mismatched localStorage token. The useEffect now
calls getMe() without a bearer token first (relying on the HttpOnly
cookie), and only falls back to localStorage if cookie auth fails.
handleCliAuthorize uses an authSourceRef to pick the matching token
source — issueCliToken for cookie sessions, localStorage for token
sessions — preventing the click handler from re-reading a potentially
stale localStorage entry.
Workspace creation with duplicate slugs now auto-appends -2, -3, … on
the server side instead of returning 409. The onboarding wizard also
shows an editable Workspace URL field (multica.ai/<slug>) that
auto-generates from the name but can be manually customized.
When an agent is triggered via @mention (not as the issue assignee),
the generated CLAUDE.md had no explicit agent identity. The agent would
infer its identity from the issue's assignee field, causing it to skip
work intended for it.
Now CLAUDE.md always includes "You are: <agent-name> (ID: <agent-id>)"
so the agent knows exactly who it is regardless of the issue assignee.
Closes MUL-709
* fix(comment): set trigger_comment_id to actual reply, not thread root
When a user replies in a thread and @mentions an agent, the enqueued
task's trigger_comment_id was incorrectly set to the parent (thread
root) comment instead of the reply that contained the mention. This
caused the agent to read the wrong comment and miss the user's actual
instructions.
Always pass comment.ID to EnqueueTaskForMention so agents see the
comment that triggered them.
Fixes MUL-708
* fix(task): resolve thread root in createAgentComment for reply triggers
With trigger_comment_id now correctly pointing to the actual reply
(not the thread root), createAgentComment must resolve to the thread
root before posting. Otherwise error/system comments would have
parent_id pointing to a nested reply, making them invisible in the
frontend's flat thread grouping.
Part of MUL-708
- cmd_daemon.go: use filepath.Join for PID/log file paths instead of string concat with "/"
- codex_home.go: use os.TempDir() instead of hardcoded "/tmp" for cross-platform fallback
Co-authored-by: Devv <devv@Devvs-Mac-mini.local>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The sub-issue progress indicator (e.g. "0/2") was undercounting because
it was computed from the client-side issue list, which only loads the
first 50 done issues. Sub-issues marked as done beyond that page were
excluded from both the total and done counts.
Added a dedicated backend endpoint (GET /api/issues/child-progress) that
aggregates child issue counts directly from the database, ensuring
accurate totals regardless of client-side pagination or filtering.
Fixes MUL-702
On Windows, os.Symlink requires Developer Mode or admin privileges.
Extract symlink creation into platform-specific files: on non-Windows,
behavior is unchanged (os.Symlink). On Windows, try os.Symlink first,
then fall back to directory junctions (mklink /J) for dirs and file
copy for files.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The frontend's listTaskMessages() was calling /api/daemon/tasks/{id}/messages
which uses DaemonAuth middleware (requires Authorization header). After the
cookie auth migration (#819), cookie-mode sessions don't send an Authorization
header, causing 401 on this endpoint. The 401 then triggers handleUnauthorized()
which clears the workspace context, cascading into 400 errors on all subsequent
requests.
Fix: add GET /api/tasks/{taskId}/messages under regular user auth middleware,
and update the frontend to use it instead of the daemon endpoint.
Closes#833
* feat(onboarding): add full-screen onboarding wizard for new workspaces
Replace auto-provisioned workspace with an interactive 4-step onboarding
wizard: Create Workspace → Connect Runtime → Create Agent → Get Started.
- Remove server-side ensureUserWorkspace() so new users land in onboarding
- Add onboarding wizard in packages/views/onboarding/ (4 steps)
- Wire login/OAuth callbacks to redirect to /onboarding when no workspace
- Add DashboardGuard onboardingPath fallback for workspace-less users
- Sidebar "Create workspace" navigates to /onboarding instead of modal
- Remove CreateWorkspaceModal (replaced by wizard step 1)
- Auto-generate workspace slug from name (no user-facing URL field)
- Unified CLI install flow: install.sh + multica setup (auto-detects local)
- Create onboarding issues on completion with interactive "Say hello" task
* test(auth): update workspace tests to match onboarding flow
Login no longer auto-creates workspaces — new users start with zero
workspaces and create one through the onboarding wizard. Update both
integration and handler tests to assert 0 workspaces after verify-code.
1. Security: add isBlockedEnvKey() blocklist that rejects MULTICA_*
prefix and critical system vars (HOME, PATH, USER, SHELL, TERM,
CODEX_HOME) from custom_env injection
2. Observability: log warnings when json.Unmarshal fails on custom_env
(agentToResponse + claim endpoint)
3. UX: use stable auto-increment IDs for env entry React keys instead
of array index to prevent input focus/state issues on add/remove
