Merge branch 'v1.7' into dev

alternative.platforms/amd64/README.md

@@ -12,7 +12,7 @@ On MacOS you need to install:
 1. brew: `/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)"`
 2. packer: `brew install packer`
 3. vagrant: `brew install vagrant`
-4. virtualbox: `brew cask install virtualbox` (maybe re-run after you changed the requested secruity permission to be successfull)
+4. virtualbox: `brew cask install virtualbox` (maybe re-run after you changed the requested security permission to be successful)
 
 ```
 cd alternative.platforms/amd64/packer

alternative.platforms/dietpi/Odroid_HC1_XU4.md

@@ -71,7 +71,7 @@ password: `raspiblitz`
 
 ### Build your own DietPi image:
 
-Watch out this is an ardous process. 
+Watch out this is an arduous process. 
 Updating from a v6.14 DietPi image is causing a bootloop after the first restart. See the issue: https://github.com/MichaIng/DietPi/issues/2495.
 This will be sorted out once a new image version is uploaded for the Odroids to dietpi.com
 
@@ -135,7 +135,7 @@ Changing the SSH server will change the SSH keys again. To clear:
 
 * Run this command to build from the master branch of @rootzoll:  
 `wget https://raw.githubusercontent.com/rootzoll/raspiblitz/dev/build_sdcard.sh && sudo bash build_sdcard.sh`  
-This will take a couple minutes depending on your internet ceonnection and the processing power of the SBC.
+This will take a couple minutes depending on your internet connection and the processing power of the SBC.
 
 * Format of the command to build the SDcard from an alternative branch:  
 `wget https://raw.githubusercontent.com/[GITHUB-USERNAME]/raspiblitz/[BRANCH]/build_sdcard.sh && sudo bash build_sdcard.sh [BRANCH] [GITHUB-USERNAME]`  

build_sdcard.sh

@@ -14,7 +14,7 @@ echo "* RASPIBLITZ SD CARD IMAGE SETUP v1.7.1 *"
 echo "*****************************************"
 echo "For details on optional parameters - see build script source code:"
 
-# 1st optional paramater: NO-INTERACTION
+# 1st optional parameter: NO-INTERACTION
 # ----------------------------------------
 # When 'true' then no questions will be asked on building .. so it can be used in build scripts
 # for containers or as part of other build scripts (default is false)
@@ -30,7 +30,7 @@ else
   echo "1) will use NO-INTERACTION --> '${noInteraction}'"
 fi
 
-# 2nd optional paramater: FATPACK
+# 2nd optional parameter: FATPACK
 # -------------------------------
 # could be 'true' or 'false' (default)
 # When 'true' it will pre-install needed frameworks for additional apps and features
@@ -50,7 +50,7 @@ else
   echo "2) will use FATPACK --> '${fatpack}'"
 fi
 
-# 3rd optional paramater: GITHUB-USERNAME
+# 3rd optional parameter: GITHUB-USERNAME
 # ---------------------------------------
 # could be any valid github-user that has a fork of the raspiblitz repo - 'rootzoll' is default
 # The 'raspiblitz' repo of this user is used to provisioning sd card 
@@ -62,7 +62,7 @@ if [ ${#githubUser} -eq 0 ]; then
 fi
 echo "3) will use GITHUB-USERNAME --> '${githubUser}'"
 
-# 4th optional paramater: GITHUB-BRANCH
+# 4th optional parameter: GITHUB-BRANCH
 # -------------------------------------
 # could be any valid branch of the given GITHUB-USERNAME forked raspiblitz repo - 'dev' is default
 githubBranch="$4"
@@ -71,7 +71,7 @@ if [ ${#githubBranch} -eq 0 ]; then
 fi
 echo "4) will use GITHUB-BRANCH --> '${githubBranch}'"
 
-# 5th optional paramater: DISPLAY-CLASS
+# 5th optional parameter: DISPLAY-CLASS
 # ----------------------------------------
 # Could be 'hdmi', 'headless' or 'lcd'
 # On 'false' the standard video output is used (HDMI) by default.
@@ -87,7 +87,7 @@ else
   echo "5) will use DISPLAY-CLASS --> '${displayClass}'"
 fi
 
-# 6th optional paramater: TWEAK-BOOTDRIVE
+# 6th optional parameter: TWEAK-BOOTDRIVE
 # ---------------------------------------
 # could be 'true' (default) or 'false'
 # If 'true' it will try (based on the base OS) to optimize the boot drive.
@@ -103,7 +103,7 @@ else
   echo "6) will use TWEAK-BOOTDRIVE --> '${tweakBootdrives}'"
 fi
 
-# 7th optional paramater: WIFI
+# 7th optional parameter: WIFI
 # ---------------------------------------
 # could be 'false' or 'true' (default) or a valid WIFI country code like 'US' (default)
 # If 'false' WIFI will be deactivated by default
@@ -245,7 +245,7 @@ if [ "${baseimage}" = "raspbian" ] || [ "${baseimage}" = "dietpi" ] || \
     # https://github.com/rootzoll/raspiblitz/issues/684
     sudo sed -i "s/^    SendEnv LANG LC.*/#   SendEnv LANG LC_*/g" /etc/ssh/ssh_config
 
-    # remove unneccesary files
+    # remove unnecessary files
     sudo rm -rf /home/pi/MagPi
     # https://www.reddit.com/r/linux/comments/lbu0t1/microsoft_repo_installed_on_all_raspberry_pis/
     sudo rm -f /etc/apt/sources.list.d/vscode.list 

home.admin/00infoBlitz.sh

@@ -481,7 +481,7 @@ elif [ ${#ups} -gt 1 ] && [ "${upsStatus}" = "n/a" ]; then
   echo "UPS service activated but not running"
 else
 
-  # cheching status of apps and display if in sync or problems
+  # checking status of apps and display if in sync or problems
   appInfoLine=""
 
   # Electrum Server - electrs
@@ -510,4 +510,4 @@ else
 
 fi
 
-# EOF
+# EOF

home.admin/00raspiblitz.sh

@@ -62,7 +62,7 @@ fi
 
 # special state: copystation
 if [ "${state}" = "copystation" ]; then
-  echo "Copy Station is Runnning ..."
+  echo "Copy Station is Running ..."
   echo "reboot to return to normal"
   sudo /home/admin/XXcopyStation.sh
   exit

home.admin/97addMobileWallet.sh

@@ -73,7 +73,7 @@ For full support switch to mainnet.
 " 9 55
 fi
 
-# fuction to call for wallets that support TOR
+# function to call for wallets that support TOR
 connect="ip"
 choose_IP_or_TOR()
 {
@@ -90,7 +90,7 @@ choose_IP_or_TOR()
 	fi
 }
 
-# fuction to if already activated or user wants to activate IP2TOR
+# function to if already activated or user wants to activate IP2TOR
 # needs parameter: #1 "LND-REST-API" or "LND-GRPC-API"
 ip2tor=""
 checkIP2TOR()
@@ -109,7 +109,7 @@ checkIP2TOR()
   #read key
   
   # if IP2TOR is not already available:
-  # and the checks from avove showed there is SSH forwarding / dynDNS
+  # and the checks from above showed there is SSH forwarding / dynDNS
   # then ask user if IP2TOR subscription is wanted
   if [ ${#ip2tor} -eq 0 ] && [ ${aks4IP2TOR} -eq 1 ]; then
     whiptail --title " Want to use a IP2TOR Bridge? " --yes-button "Go To Shop" --no-button "No Thanks" --yesno "It can be hard to connect to your RaspiBlitz when away from home.\n\nDo you like to subscribe to a IP2TOR bridge service (that will give you a public IP while hidden behind TOR) and make it more easy to connect your mobile wallet?" 12 60

home.admin/98repairMenu.sh

@@ -55,7 +55,7 @@ OPTIONS=(SOFTWARE "Run Softwaretest (DebugReport)" \
          RESET-CHAIN "Delete Blockchain & Re-Download" \
          RESET-LND "Delete LND & start new node/wallet" \
          RESET-HDD "Delete HDD Data but keep Blockchain" \
-         RESET-ALL "Delete HDD completly to start fresh" \
+         RESET-ALL "Delete HDD completely to start fresh" \
          DELETE-ELEC "Delete Electrum Index" \
          DELETE-INDEX "Delete Bitcoin Transaction-Index"
 	)

home.admin/99updateMenu.sh

@@ -69,7 +69,7 @@ Do you want to download Lightning Data Backup now?
   fi
 
   whiptail --title "READY TO UPDATE?" --yes-button "START UPDATE" --no-button "Cancel" --yesno "If you start the update: The RaspiBlitz will power down.
-Once the LCD is white and no LEDs are blicking anymore:
+Once the LCD is white and no LEDs are blinking anymore:
 
 - Remove the Power from RaspiBlitz
 - Exchange the old with the new SD card

home.admin/XXcleanHDD.sh

@@ -100,7 +100,7 @@ else
     sudo rm -f /mnt/hdd/litecoin/.* 2>/dev/null
     sudo rm -f -r /mnt/hdd/litecoin/database
 
-    # lnd (delet all)
+    # lnd (delete all)
     sudo rm -f -r /mnt/hdd/lnd
     sudo rm -f -r /mnt/hdd/backup_lnd
 

home.admin/XXcopyStation.sh

@@ -71,7 +71,7 @@ fi
 if [ "$1" != "-foreground" ]; then 
   screenPID=$(screen -ls | grep "copystation" | cut -d "." -f1 | xargs)
   if [ ${#screenPID} -eq 0 ]; then
-    # start copystation in sreen 
+    # start copystation in screen 
     echo "# starting copystation screen session"
     screen -S copystation -dm /home/admin/XXcopyStation.sh -foreground
     screen -d -r
@@ -100,7 +100,7 @@ else
   chmod 777 ${pathTemplateHDD}
 fi
 
-# make sure that lnd is stopped (if runnning)
+# make sure that lnd is stopped (if running)
 systemctl stop lnd 2>/dev/null
 systemctl stop background 2>/dev/null
 
@@ -243,7 +243,7 @@ Please remove device and PRESS ENTER
           if [ "${nointeraction}" != "1" ]; then
             whiptail --title "Format HDD" --yes-button "Format" --no-button "Cancel" --yesno "
 Found new HDD. Do you want to FORMAT now?
-Lable of device with: ${detectedDrive}
+Label of device with: ${detectedDrive}
             " 10 54
             choice=$?
           else
@@ -254,7 +254,7 @@ Lable of device with: ${detectedDrive}
           # on cancel
           if [ "${choice}" != "0" ]; then
             whiptail --title "Format HDD" --msgbox "
-OK NO FORMAT - Please remove decive now.
+OK NO FORMAT - Please remove device now.
             " 8 46
             exit 1
           fi

home.admin/_background.sh

@@ -201,7 +201,7 @@ do
         echo "new publicIP but no LND restart because no auto-unlock"
       fi
 
-      # trigger update if dnyamic domain (if set)
+      # trigger update if dynamic domain (if set)
       updateDynDomain=1
 
     else
@@ -300,10 +300,10 @@ do
             sudo cp ${localBackupPath} /mnt/backup/
             sudo cp ${localTimestampedPath} /mnt/backup/
 
-            # check reseults
+            # check results
             result=$?
             if [ ${result} -eq 0 ]; then
-              echo "OK - Sucessfull Copy to additional Backup Device"
+              echo "OK - Successful Copy to additional Backup Device"
             else
               echo "FAIL - Copy to additional Backup Device exited with ${result}"
             fi

home.admin/_bootstrap.sh

@@ -246,7 +246,7 @@ if [ ${logsMegaByte} -gt 1000 ]; then
   fi
   sleep 3
   echo "WARN !! Logs in /var/log in were bigger then 1GB and got emergency delete to prevent fillup."
-  echo "If you see this in the logs please report to the GitHub issues, so LOG config needs to hbe optimized."
+  echo "If you see this in the logs please report to the GitHub issues, so LOG config needs to be optimized."
 else
   echo "OK - logs are at ${logsMegaByte} MB - within safety limit"
 fi
@@ -738,7 +738,7 @@ if [ ${#network} -gt 0 ] && [ ${#chain} -gt 0 ]; then
   sudo /home/admin/config.scripts/lnd.credentials.sh sync >> $logFile
 
 else 
-  echo "skipping LND credientials sync" >> $logFile
+  echo "skipping LND credentials sync" >> $logFile
 fi
 
 ################################
@@ -782,7 +782,7 @@ fi
 # PREPARE SUBSCRIPTIONS DATA DIRECTORY
 ######################################
 
-if [ -d "/mnt/hdd/app-data/subscrptions" ]; then
+if [ -d "/mnt/hdd/app-data/subscriptions" ]; then
   echo "OK: subscription data directory exists"
 else
   echo "CREATE: subscription data directory"

home.admin/_provision_.sh

@@ -69,7 +69,7 @@ if [ "${headless}" == "on" ]; then
   echo "displayClass=headless" >> ${configFile}
   displayClass="headless"
 elif [ "${headless}" != "" ]; then
-  echo "Remove old headless pramater from config" >> ${logFile}
+  echo "Remove old headless parameter from config" >> ${logFile}
   sudo sed -i "s/^headless=.*//g" ${configFile}
   displayClass="lcd"
 fi
@@ -148,7 +148,7 @@ sudo rm -r  /mnt/hdd/backup_lnd 2>/dev/null
 sudo cp -r /mnt/hdd/lnd /mnt/hdd/backup_lnd >> ${logFile} 2>&1
 numOfDiffers=$(sudo diff -arq /mnt/hdd/lnd /mnt/hdd/backup_lnd | grep -c "differ")
 if [ ${numOfDiffers} -gt 0 ]; then
-  echo "FAIL: Backup was not successfull" >> ${logFile}
+  echo "FAIL: Backup was not successful" >> ${logFile}
   sudo diff -arq /mnt/hdd/lnd /mnt/hdd/backup_lnd >> ${logFile} 2>&1
   echo "removing backup dir to prevent false override" >> ${logFile}
 else
@@ -249,7 +249,7 @@ if [ ${#bitcoinInterimsUpdate} -gt 0 ]; then
   sudo sed -i "s/^message=.*/message='Provisioning Bitcoin Core update'/g" ${infoFile}
   if [ "${bitcoinInterimsUpdate}" == "reckless" ]; then
     # recklessly update Bitcoin Core to latest release on GitHub
-    echo "Provisioning BItcoin Core reckless interims update" >> ${logFile}
+    echo "Provisioning Bitcoin Core reckless interims update" >> ${logFile}
     sudo /home/admin/config.scripts/bitcoin.update.sh reckless >> ${logFile}
   else
     # when installing the same sd image - this will re-trigger the secure interims update
@@ -673,7 +673,7 @@ if [ ${confExists} -eq 0 ]; then
   sudo chown bitcoin:bitcoin /mnt/hdd/bitcoin/bitcoin.conf
 fi
 
-# singal setup done
+# signal setup done
 sudo sed -i "s/^message=.*/message='Setup Done'/g" ${infoFile}
 
 # set the local network hostname (just if set in config - will not be set anymore by default in newer version)

home.admin/config.scripts/blitz.backupdevice.sh

@@ -24,7 +24,7 @@ if [ "$1" = "status" ]; then
     echo "backupdevice=1"
     echo "UUID='${localBackupDeviceUUID}'"
 
-    # check if nackup device is mounted
+    # check if backup device is mounted
     backupDeviceExists=$(df | grep -c "/mnt/backup")
     if [ ${backupDeviceExists} -gt 0 ]; then
       echo "isMounted=1"
@@ -43,7 +43,7 @@ if [ "$1" = "status" ]; then
     for disk in $(lsblk -o NAME,TYPE | grep "disk" | awk '$1=$1' | cut -d " " -f 1)
     do
       devMounted=$(lsblk -o MOUNTPOINT,NAME | grep "$disk" | grep -c "^/")
-      # is raid candidate when: not mounted & not the data drive cadidate (hdd/ssd) & not BTRFS RAID
+      # is raid candidate when: not mounted & not the data drive candidate (hdd/ssd) & not BTRFS RAID
       if [ ${devMounted} -eq 0 ] && [ "${disk}" != "${hdd}" ] && [ "${disk}" != "${raidUsbDev}" ]; then
         sizeBytes=$(lsblk -o NAME,SIZE -b | grep "^${disk}" | awk '$1=$1' | cut -d " " -f 2)
         sizeGigaBytes=$(echo "scale=0; ${sizeBytes}/1024/1024/1024" | bc -l)
@@ -86,7 +86,7 @@ if [ "$1" = "on" ]; then
       exit 1
     fi
 
-    # check if backup devcie is already connected
+    # check if backup device is already connected
     if [ ${backupCandidates} -eq 0 ]; then
       dialog --title ' Adding Backup Device ' --msgbox 'Please connect now the backup device\nFor example a thumb drive bigger than 120 MB.\nDont use a second HDD/SSD for that.\nBest on a USB2 port (not the blue ones).\nThen press OK.' 9 50
       clear
@@ -95,7 +95,7 @@ if [ "$1" = "on" ]; then
       sleep 3
       source <(sudo /home/admin/config.scripts/blitz.backupdevice.sh status)
       if [ ${backupCandidates} -eq 0 ]; then
-        dialog --title ' FAIL ' --msgbox 'NOT able to detect a possible backup device.\nProcess was not sucessful.' 6 50
+        dialog --title ' FAIL ' --msgbox 'NOT able to detect a possible backup device.\nProcess was not successful.' 6 50
         clear
         exit 1
       fi
@@ -246,5 +246,5 @@ if [ "$1" = "off" ]; then
   exit 0
 fi
 
-echo "error='unkown command'"
+echo "error='unknown command'"
 exit 1

home.admin/config.scripts/blitz.datadrive.sh

@@ -12,9 +12,9 @@ fi
 
 # TO UNDERSTAND THE BTFS HDD LAYOUT:
 ####################################
-# 1) BLITZDATA - a BTRFS partion for all RaspiBlitz data - 30GB
+# 1) BLITZDATA - a BTRFS partition for all RaspiBlitz data - 30GB
 #    here put all files of LND, app, etc that need backup
-# 2) BLITZSTORE - a BTFRS partion for mostly Blockchain data
+# 2) BLITZSTORAGE - a BTFRS partition for mostly Blockchain data
 #    all data here can get lost and rebuild if needed (Blockchain, Indexes, etc)
 # 3) BLITZTEMP - a FAT partition just for SWAP & Exchange - 34GB
 #    used for SWAP file and easy to read from Win32/MacOS for exchange
@@ -124,14 +124,14 @@ if [ "$1" = "status" ]; then
          fi
       else
 
-         # default hdd set, when there is no OSpartition and there might ne no partitions at all
+         # default hdd set, when there is no OSpartition and there might be no partitions at all
          if [ "${OSPartition}" = "root" ] && [ "${hdd}" = "" ] && [ "${testdevice}" != "" ]; then
           hdd="${testdevice}"
          fi
 
 	       # make sure to use the biggest
          if [ ${testsize} -gt ${sizeDataPartition} ]; then
-	        # Partion to be created is smaller than disk so this is not correct (but close)
+	        # Partition to be created is smaller than disk so this is not correct (but close)
             sizeDataPartition=$(sudo fdisk -l /dev/$testdevice | grep GiB | cut -d " " -f 5)
             hddDataPartition="${testdevice}1"
             hdd="${testdevice}"
@@ -418,7 +418,7 @@ if [ "$1" = "status" ]; then
     for disk in $(lsblk -o NAME,TYPE | grep "disk" | awk '$1=$1' | cut -d " " -f 1)
     do
       devMounted=$(lsblk -o MOUNTPOINT,NAME | grep "$disk" | grep -c "^/")
-      # is raid candidate when not mounted and not the data drive cadidate (hdd/ssd)
+      # is raid candidate when not mounted and not the data drive candidate (hdd/ssd)
       if [ ${devMounted} -eq 0 ] && [ "${disk}" != "${hdd}" ] && [ "${hdd}" != "" ]; then
         sizeBytes=$(lsblk -o NAME,SIZE -b | grep "^${disk}" | awk '$1=$1' | cut -d " " -f 2)
         sizeGigaBytes=$(echo "scale=0; ${sizeBytes}/1024/1024/1024" | bc -l)
@@ -447,7 +447,7 @@ fi
 # FORMAT EXT4 or BTRFS
 ######################
 
-# check basics for formating
+# check basics for formatting
 if [ "$1" = "format" ]; then
   
   # check valid format
@@ -465,7 +465,7 @@ if [ "$1" = "format" ]; then
   hdd=$3
   if [ ${#hdd} -eq 0 ]; then
     >&2 echo "# missing valid third parameter as the device (like 'sda')"
-    >&2 echo "# run 'status' to see cadidate devices"
+    >&2 echo "# run 'status' to see candidate devices"
     echo "error='missing parameter'"
     exit 1
   fi
@@ -631,7 +631,7 @@ if [ "$1" = "format" ]; then
        fi
      done
 
-     # setting fsk check intervall to 1
+     # setting fsk check interval to 1
      # see https://github.com/rootzoll/raspiblitz/issues/360#issuecomment-467567572
      if [ $ext4IsPartition -eq 0 ]; then
         sudo tune2fs -c 1 /dev/${hdd}1
@@ -643,7 +643,7 @@ if [ "$1" = "format" ]; then
      exit 0
   fi
 
-  # formatting new: BTRFS layout - this consists of 3 volmunes:
+  # formatting new: BTRFS layout - this consists of 3 volumes:
   if [ "$2" = "btrfs" ]; then
 
      # prepare temp mount point
@@ -729,7 +729,7 @@ if [ "$1" = "format" ]; then
      sudo btrfs subvolume create WORKINGDIR
      cd && sudo umount /tmp/btrfs
 
-     >&2 echo "# Creating the FAT32 partion"
+     >&2 echo "# Creating the FAT32 partition"
      sudo parted -s -a optimal -- /dev/${hdd} mkpart primary fat32 -34GiB 100% 1>/dev/null
      sync && sleep 3
      win=$(lsblk -o NAME | grep -c ${hdd}3)
@@ -911,7 +911,7 @@ if [ "$1" = "fstab" ]; then
       sync
     done
 
-    # get user and grouid if usr/group bitcoin
+    # get user and groupid if usr/group bitcoin
     bitcoinUID=$(id -u bitcoin)
     bitcoinGID=$(id -g bitcoin)
 
@@ -981,7 +981,7 @@ if [ "$1" = "raid" ]; then
      >&2 echo "# RAID - Removing raid drive to RaspiBlitz data drive"  
   else
      >&2 echo "# possible 2nd parameter is 'on' or 'off'"  
-     echo "error='unkown parameter'"
+     echo "error='unknown parameter'"
      exit 1
   fi
 
@@ -995,7 +995,7 @@ if [ "$1" = "raid" ] && [ "$2" = "on" ]; then
   # second parameter - like its named: lsblk
   usbdev=$3
   if [ ${#usbdev} -eq 0 ]; then
-    >&2 echo "# FAIL third parameter is missing with the name of the usb device to add"
+    >&2 echo "# FAIL third parameter is missing with the name of the USB device to add"
     echo "error='missing parameter'"
     exit 1
   fi
@@ -1037,7 +1037,7 @@ if [ "$1" = "raid" ] && [ "$2" = "on" ]; then
     exit 1
   fi
 
-  # remove all partions from device
+  # remove all partitions from device
   for v_partition in $(parted -s /dev/${usbdev} print|awk '/^ / {print $1}')
   do
    sudo parted -s /dev/${usbdev} rm ${v_partition}
@@ -1267,7 +1267,7 @@ if [ "$1" = "tempmount" ]; then
     
   elif [ "${hddFormat}" = "btrfs" ]; then
 
-    # get user and grouid if usr/group bitcoin
+    # get user and groupid if usr/group bitcoin
     bitcoinUID=$(id -u bitcoin)
     bitcoinGID=$(id -g bitcoin)
 
@@ -1430,7 +1430,7 @@ if [ "$1" = "link" ]; then
   echo "The /mnt/hdd/app-data directory should be used by additional/optional apps and services installed to the RaspiBlitz for their data that should survive an import/export/backup. Data that can be reproduced (indexes, etc.) should be stored in app-storage." > ./README.txt
   sudo mv ./README.txt /mnt/hdd/app-data/README.txt 2>/dev/null
 
-  echo "The /mnt/hdd/app-storage directrory should be used by additional/optional apps and services installed to the RaspiBlitz for their non-critical and reproducable data (indexes, public blockchain, etc.) that does not need to survive an an import/export/backup. Data is critical should be in app-data." > ./README.txt
+  echo "The /mnt/hdd/app-storage directory should be used by additional/optional apps and services installed to the RaspiBlitz for their non-critical and reproducible data (indexes, public blockchain, etc.) that does not need to survive an an import/export/backup. Data is critical should be in app-data." > ./README.txt
   sudo mv ./README.txt /mnt/hdd/app-storage/README.txt 2>/dev/null
 
   >&2 echo "# OK - all symbolic links build"
@@ -1514,8 +1514,8 @@ if [ "$1" = "swap" ]; then
     exit 0
 
   else
-    >&2 echo "# FAIL unkown second parameter - try 'on' or 'off'"
+    >&2 echo "# FAIL unknown second parameter - try 'on' or 'off'"
-    echo "error='unkown parameter'"
+    echo "error='unknown parameter'"
     exit 1
   fi
 
@@ -1560,7 +1560,7 @@ if [ "$1" = "clean" ]; then
         sudo dphys-swapfile uninstall 1>/dev/null
         sync
 
-        # for all other data shred files selectivly
+        # for all other data shred files selectively
         for entry in $(ls -A1 /mnt/hdd)
         do
 
@@ -1574,7 +1574,7 @@ if [ "$1" = "clean" ]; then
             fi
           fi
 
-          # decide when to shredd or just delete - just delete unsensitive data
+          # decide when to shred or just delete - just delete nonsensitive data
           if [ "${entry}" = "torrent" ] || [ "${entry}" = "app-storage" ]; then
             whenDeleteSchredd=0
           fi
@@ -1585,7 +1585,7 @@ if [ "$1" = "clean" ]; then
           if [ ${isBTRFS} -eq 1 ] && [ "${entry}" != "temp" ]; then
             whenDeleteSchredd=0
           fi
-          # on SSDs never shredd
+          # on SSDs never shred
           # https://www.davescomputers.com/securely-deleting-files-solid-state-drive/
           if [ "${isSSD}" == "1" ]; then
             whenDeleteSchredd=0
@@ -1681,8 +1681,8 @@ if [ "$1" = "clean" ]; then
       exit 1
 
     else
-      >&2 echo "# FAIL unkown third parameter try '-total' or '-keepblockchain'"
+      >&2 echo "# FAIL unknown third parameter try '-total' or '-keepblockchain'"
-      echo "error='unkown parameter'"
+      echo "error='unknown parameter'"
       exit 1    
     fi
 
@@ -1740,8 +1740,8 @@ if [ "$1" = "clean" ]; then
     exit 1
   
   else
-    >&2 echo "# FAIL unkown second parameter - try 'all','blockchain' or 'temp'"
+    >&2 echo "# FAIL unknown second parameter - try 'all','blockchain' or 'temp'"
-    echo "error='unkown parameter'"
+    echo "error='unknown parameter'"
     exit 1
   fi
 

home.admin/config.scripts/blitz.display.sh

@@ -211,7 +211,7 @@ if [ "${command}" == "hdmi" ]; then
   elif [ "${secondParameter}" == "off" ]; then
     sudo /home/admin/config.scripts/blitz.display.sh set-display lcd
   else
-    echo "error='unkown second parameter'"
+    echo "error='unknown second parameter'"
     exit 1
   fi
   exit 0
@@ -220,7 +220,7 @@ fi
 #######################################
 # DISPLAY TYPED INSTALLS & UN-INSTALLS
 # HDMI is the default - every added
-# displayClass needs a install fuction
+# displayClass needs a install function
 # and a uninstall function back to HDMI
 #######################################
 
@@ -290,7 +290,7 @@ function install_lcd() {
     fi
     containsModification=$(sudo grep -c "${modification}" /boot/cmdline.txt)
     if [ ${containsModification} -eq 0 ]; then
-      echo "# FAIL: was not able to mofify /boot/cmdline.txt"
+      echo "# FAIL: was not able to modify /boot/cmdline.txt"
       echo "err='ended unclear state'"
       exit 1
     fi
@@ -566,5 +566,5 @@ if [ "${command}" == "set-display" ]; then
 fi
 
 # unknown command
-echo "error='unkown command'"
+echo "error='unknown command'"
 exit 1

home.admin/config.scripts/blitz.github.sh

@@ -36,13 +36,13 @@ install=0
 wantedBranch="$1"
 wantedGitHubUser="$2"
 if [ "${wantedBranch}" = "-run" ]; then
-  # "-run" ist just used by "patch" command and will ignore all further parameter
+  # "-run" its just used by "patch" command and will ignore all further parameter
   wantedBranch="${activeBranch}"
   wantedGitHubUser="${activeGitHubUser}"
   # detect if running in vagrant VM
   vagrant=$(df | grep -c "/vagrant")
   if [ "$2" = "git" ]; then 
-    echo "# forcing guthub over vagrant sync"
+    echo "# forcing github over vagrant sync"
     vagrant=0
   fi
 fi

home.admin/config.scripts/blitz.litecoin.sh

@@ -12,7 +12,7 @@ fi
 isRaspbian=$(cat /etc/os-release 2>/dev/null | grep -c 'Raspbian')
 if [ ${isRaspbian} -eq 0]; then
 
-  echo "error='litecoin is only avaulable for raspbian realease'"
+  echo "error='litecoin is only available for raspbian release'"
   exit 1
 
 else

home.admin/config.scripts/blitz.migration.sh

@@ -336,7 +336,7 @@ if [ "$1" = "export-gui" ]; then
   echo "* DOWNLOAD THE MIGRATION FILE *"
   echo "*******************************"
   echo 
-  echo "On yoz Linux or MacOS Laptop - RUN IN NEW TERMINAL:"
+  echo "On your Linux or MacOS Laptop - RUN IN NEW TERMINAL:"
   echo "${scpDownloadUnix}"
   echo "On Windows use command:"
   echo "${scpDownloadWin}"
@@ -387,7 +387,7 @@ if [ "$1" = "import" ]; then
     exit 1
   fi
 
-  # copy bitcoin/litecoin data backups back to orgplaces (if part of backup)
+  # copy bitcoin/litecoin data backups back to original places (if part of backup)
   if [ -d "/mnt/hdd/backup_bitcoin" ]; then
     echo "# Copying back bitcoin backup data .."
     sudo mkdir /mnt/hdd/bitcoin
@@ -419,4 +419,4 @@ if [ "$1" = "import" ]; then
 fi
 
 echo "error='unkown command'"
-exit 1
+exit 1

home.admin/config.scripts/blitz.setconf.sh

@@ -21,7 +21,7 @@ dialog \
 --title "Editing the $EDITFILE" \
 --editbox "$EDITFILE" 200 200 2> "$conf"
 
-# make decison
+# make decision
 pressed=$?
 case $pressed in
   0)

home.admin/config.scripts/blitz.setpassword.sh

@@ -130,7 +130,7 @@ if [ "${abcd}" = "a" ]; then
       exit 0
     fi
 
-    # use entred password now as parameter
+    # use entered password now as parameter
     newPassword="${password1}"
 
   fi  
@@ -206,7 +206,7 @@ elif [ "${abcd}" = "b" ]; then
       exit 0
     fi
 
-    # use entred password now as parameter
+    # use entered password now as parameter
     newPassword="${password1}"
   fi
 

home.admin/config.scripts/blitz.shutdown.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # for reboot call: sudo /home/admin/config.scripts/blitz.shutdown.sh reboot
 
-# use this script instead of dirct shutdown command to:
+# use this script instead of direct shutdown command to:
 # 1) give UI the info that a reboot/shutdown is now happening
 # 2) shutdown/reboot in a safe way to prevent data corruption
 

home.admin/config.scripts/blitz.statusscan.sh

@@ -202,7 +202,7 @@ if [ ${lndRunning} -eq 1 ]; then
           # nullify error - this is normal
           lndErrorFull=""
           errorResolved=1
-          # oputput basic data because no error
+          # output basic data because no error
           echo "# LND RPC is still warming up - no scan progress: prepare scan"
           echo "scanTimestamp=-2"
           echo "syncedToChain=0"
@@ -215,7 +215,7 @@ if [ ${lndRunning} -eq 1 ]; then
 
       # if not known error and not resolved before - keep generic
       if [ ${#lndErrorShort} -eq 0 ] && [ ${errorResolved} -eq 0 ]; then
-        lndErrorShort='Unkown Error - see logs'
+        lndErrorShort='Unknown Error - see logs'
         lndErrorFull=$(echo ${lndErrorFull} | tr -d "'")
       fi
 
@@ -257,7 +257,7 @@ if [ ${lndRunning} -eq 1 ]; then
       scanDate=$(date -d @${scanTimestamp} 2>/dev/null)
       echo "scanDate='${scanDate}'"
       
-      # calculate LND scan progress by seconds since Genesisblock
+      # calculate LND scan progress by seconds since Genesis block
       genesisTimestamp=1230940800
 
       totalSeconds=$(echo "${nowTimestamp}-${genesisTimestamp}" | bc)

home.admin/config.scripts/blitz.subscriptions.ip2tor.py

@@ -365,7 +365,7 @@ def shopList(shopUrl):
 
 
 def shopOrder(shopUrl, hostid, servicename, torTarget, duration, msatsFirst, msatsNext, description=""):
-    print("#### Placeing order ...")
+    print("#### Placing order ...")
     shopUrl = normalizeShopUrl(shopUrl)
     orderid = apiPlaceOrderNew(session, shopUrl, hostid, torTarget)
 

home.admin/config.scripts/blitz.subscriptions.letsencrypt.py

@@ -212,7 +212,7 @@ def dynu_update(domain, token, ip):
 
 def subscriptions_new(ip, dnsservice, domain, token, target):
 
-    # check if already one subscrption exists (limit to just one)
+    # check if already one subscription exists (limit to just one)
     # https://github.com/rootzoll/raspiblitz/issues/1786
     if Path(SUBSCRIPTIONS_FILE).is_file():
         subs = toml.load(SUBSCRIPTIONS_FILE)
@@ -296,7 +296,7 @@ def subscriptions_new(ip, dnsservice, domain, token, target):
     eprint(str(err))
     if out.find("error=") > -1:
         time.sleep(6)
-        raise BlitzError("letsancrypt acme failed", out)
+        raise BlitzError("letsencrypt acme failed", out)
 
     print("# OK - LETSENCRYPT DOMAIN IS READY")
     return subscription
@@ -353,7 +353,7 @@ def get_subscription(subscription_id):
 
 
 def get_domain_by_ip(ip):
-    # does subscriptin file exists
+    # does subscription file exists
     if Path(SUBSCRIPTIONS_FILE).is_file():
         subs = toml.load(SUBSCRIPTIONS_FILE)
     else:
@@ -393,7 +393,7 @@ def menu_make_subscription():
         "\nChoose a free DNS service to work with:",
         choices=choices, width=60, height=10, title="Select Service")
 
-    # if user chosses CANCEL
+    # if user chooses CANCEL
     if code != d.OK:
         sys.exit(0)
 
@@ -427,8 +427,8 @@ If you havent already go to https://duckdns.org
         # check for valid input
         if len(subdomain) == 0:
             Dialog(dialog="dialog", autowidgetsize=True).msgbox('''
-This looks not like a valid subdomain.
+This does not look like a valid subdomain.
-        ''', title="Unvalid Input")
+        ''', title="Invalid Input")
             sys.exit(0)
 
         # enter the token
@@ -446,7 +446,7 @@ This looks not like a valid subdomain.
             token = ""
         if len(token) < 20:
             Dialog(dialog="dialog", autowidgetsize=True).msgbox('''
-This looks not like a valid token.
+This does not look like a valid token.
         ''', title="Invalid Input")
             sys.exit(0)
 
@@ -468,7 +468,7 @@ If you havent already go to https://dynu.com
         domain = text.strip()
         if len(domain) < 6:
             Dialog(dialog="dialog", autowidgetsize=True).msgbox('''
-This looks not like a valid DDNS.
+This does not look like a valid DDNS.
         ''', title="Invalid Input")
             sys.exit(0)
         os.system("clear")
@@ -490,7 +490,7 @@ Continue in your dynu.com account:
         clientid = clientid.split(' ')[0]
         if len(clientid) < 20 or len(clientid.split('-'))<2: 
             Dialog(dialog="dialog", autowidgetsize=True).msgbox('''
-This looks not like valid ClientID.
+This does not look like a valid ClientID.
         ''', title="Invalid Input")
             sys.exit(0)
 
@@ -503,7 +503,7 @@ This looks not like valid ClientID.
         secret = secret.split(' ')[0]
         if len(secret) < 10:
             Dialog(dialog="dialog", autowidgetsize=True).msgbox('''
-This looks not like valid.
+This does not look like a valid SECRET.
         ''', title="Invalid Input")
             sys.exit(0)
 
@@ -570,11 +570,11 @@ Create one first and try again.
             "\nChoose the IP2TOR subscription:",
             choices=choices, width=60, height=10, title="Select")
 
-        # if user chosses CANCEL
+        # if user chooses CANCEL
         if code != d.OK:
             sys.exit(0)
 
-        # get the slected IP2TOR bridge
+        # get the selected IP2TOR bridge
         ip2tor_select = ip2tor_subs[int(tag)]
         ip = ip2tor_select["ip"]
         serviceName = ip2tor_select["name"]
@@ -582,7 +582,7 @@ Create one first and try again.
 
     elif tag == "DYNDNS":
 
-        # the subscriptioNew method will handle acrivating the dnydns part
+        # the subscriptioNew method will handle activating the dnydns part
         ip = "dyndns"
 
     elif tag == "STATIC":
@@ -602,7 +602,7 @@ Create one first and try again.
             ip = ""
         if len(ip) == 0:
             Dialog(dialog="dialog", autowidgetsize=True).msgbox('''
-This looks not like a valid IP.
+This does not look like a valid IP.
         ''', title="Invalid Input")
             sys.exit(0)
 
@@ -631,7 +631,7 @@ to reach the service you wanted.
         # https://github.com/rootzoll/raspiblitz/issues/1772
         if "failed oAuth Service" in str(e):
             Dialog(dialog="dialog", autowidgetsize=True).msgbox('''
-A temporary error with the DYNU API happend:\nUnvalid OAuth Bearer Token
+A temporary error with the DYNU API happened:\nInvalid OAuth Bearer Token
 Please try again later or choose another dynamic domain service.
 ''', title="Exception on Subscription")
             sys.exit(1)

home.admin/config.scripts/blitz.subscriptions.py

@@ -112,7 +112,7 @@ You have no active or inactive subscriptions.
         "\nYou have the following subscriptions - select for details:",
         choices=choices, cancel_label="Back", width=65, height=15, title="My Subscriptions")
 
-    # if user chosses CANCEL
+    # if user chooses CANCEL
     if code != d.OK:
         return
 
@@ -234,7 +234,7 @@ def main():
         "\nCheck existing subscriptions or create new:",
         choices=choices, width=50, height=10, title="Subscription Management")
 
-    # if user chosses CANCEL
+    # if user chooses CANCEL
     if code != d.OK:
         sys.exit(0)
 
@@ -334,7 +334,7 @@ def main():
             "\nChoose RaspiBlitz Service to create Bridge for:",
             choices=choices, width=60, height=10, title="Select Service")
 
-        # if user chosses CANCEL
+        # if user chooses CANCEL
         if code != d.OK:
             sys.exit(0)
 
@@ -416,7 +416,7 @@ def main():
 
         # action after possibly new created bride
         if service_name == SERVICE_SPHINX:
-            print("# restarting services to pickup new public url (please wait) ...")
+            print("# restarting services to pickup new public URL (please wait) ...")
             os.system("sudo systemctl restart sphinxrelay")
             time.sleep(8)
 

home.admin/config.scripts/bonus.angular_cli.sh

@@ -50,7 +50,7 @@ if [ "$1" = "1" ] || [ "$1" = "on" ]; then
     yes | npm install -g @angular/cli
     echo "# link ng"
     sudo ln -sf /usr/local/lib/nodejs/node-$VERSION-$DISTRO/bin/ng /usr/bin/ng
-    echo "# explicit trun off statistics report"
+    echo "# explicit turn off statistics report"
     ng analytics off
 
     # check if nodeJS was installed

home.admin/config.scripts/bonus.circuitbreaker.sh

@@ -168,7 +168,7 @@ fi
 
 # update
 if [ "$1" = "update" ]; then
-  echo "# Updating Circuit Braker"
+  echo "# Updating Circuit Breaker"
   cd /home/circuitbreaker/circuitbreaker
   # from https://github.com/apotdevin/thunderhub/blob/master/scripts/updateToLatest.sh
   # fetch latest master

home.admin/config.scripts/bonus.letsencrypt.sh

@@ -47,7 +47,7 @@ You can *optionally* enter an eMail address.\n
 \n
 The address will not be included in the generated certificates.\n
 \n
-It will be used to e.g. notify you about certificate expiries and changes
+It will be used to e.g. notify you about certificate expiration and changes
 to the Terms of Service of Let's Encrypt.\n
 \n
 Feel free to leave empty."
@@ -164,7 +164,7 @@ function refresh_certs_with_nginx() {
           sudo ln -s ${ACME_CERT_HOME}/${FQDN}_ecc/${FQDN}.key /mnt/hdd/app-data/nginx/tls.key
         fi
 
-        # repleace certs for tor
+        # replace certs for tor
         if [ "${options}" == "tor" ] || [ "${options}" == "ip&tor" ]; then
           echo "# replacing TOR certs for ${FQDN}"
           sudo rm /mnt/hdd/app-data/nginx/tor_tls.cert
@@ -250,7 +250,7 @@ elif [ "$1" = "issue-cert" ]; then
 
   # check if letsencrypt is on
   if [ "${letsencrypt}" != "on" ]; then
-    echo "error='letsenscrypt is not on'"
+    echo "error='letsencrypt is not on'"
     exit 1
   fi
 
@@ -289,7 +289,7 @@ elif [ "$1" = "issue-cert" ]; then
     exit 1
   fi
 
-  # create certicicates
+  # create certificates
   echo "# creating certs for ${FQDN}"
   $ACME_INSTALL_HOME/acme.sh --home "${ACME_INSTALL_HOME}" --config-home "${ACME_CONFIG_HOME}" --cert-home "${ACME_CERT_HOME}" --issue --dns ${dnsservice} -d ${FQDN} --keylength ec-256 2>&1
   success1=$($ACME_INSTALL_HOME/acme.sh --list --home "${ACME_INSTALL_HOME}" --config-home "${ACME_CONFIG_HOME}" --cert-home "${ACME_CERT_HOME}" | grep -c "${FQDN}")
@@ -324,7 +324,7 @@ elif [ "$1" = "remove-cert" ]; then
 
   # check if letsencrypt is on
   if [ "${letsencrypt}" != "on" ]; then
-    echo "error='letsenscrypt is not on'"
+    echo "error='letsencrypt is not on'"
     exit 1
   fi
 

home.admin/config.scripts/bonus.lndmanage.sh

@@ -65,7 +65,7 @@ if [ "$1" = "1" ] || [ "$1" = "on" ]; then
   if [ ${goodSignature} -gt 0 ] && [ ${correctKey} -gt 0 ]; then
     echo "# OK signature is valid"
   else
-    echo "error='unvalid signature'"
+    echo "error='invalid signature'"
     sudo rm -rf /home/admin/lndmanage
     sleep 5
     exit 1
@@ -81,7 +81,7 @@ if [ "$1" = "1" ] || [ "$1" = "on" ]; then
   # install lndmanage
   # python3 -m pip install lndmanage==0.11.0
 
-  # check if install was successfull
+  # check if install was successful
   if [ $(python3 -m pip list | grep -c "lndmanage") -eq 0 ]; then
     echo
     echo "#!! FAIL --> Was not able to install LNDMANAGE"

home.admin/config.scripts/bonus.loop.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# !! NOTICE: Faraday is now prt of the 'bonus.lit.sh' bundle
+# !! NOTICE: Faraday is now part of the 'bonus.lit.sh' bundle
 # this single install script will still be available for now
 # but main focus for the future development should be on LIT
 

home.admin/config.scripts/bonus.mempool.sh

@@ -411,7 +411,7 @@ if [ "$1" = "update" ]; then
       sudo systemctl restart nginx
 
       # Remove useless deps
-      echo "Removing unneccesary modules..."
+      echo "Removing unnecessary modules..."
       npm prune --production
 
 

home.admin/config.scripts/bonus.pool.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# !! NOTICE: Pool is now prt of the 'bonus.lit.sh' bundle
+# !! NOTICE: Pool is now part of the 'bonus.lit.sh' bundle
 # this single install script will still be available for now
 # but main focus for the future development should be on LIT
 
@@ -190,7 +190,7 @@ if [ "$1" = "1" ] || [ "$1" = "on" ]; then
 
     # make systemd service
     if [ "${runBehindTor}" = "on" ]; then
-      echo " # Connect tothe Pool server through Tor"
+      echo " # Connect to the Pool server through Tor"
       proxy="torify"
     else
       echo "# Connect to Pool server through clearnet"

home.admin/config.scripts/bonus.sphinxrelay.sh

@@ -263,7 +263,7 @@ if [ "$1" = "status" ]; then
     fi
   fi
 
-  # determnine the public url for the pairing code based on best setup
+  # determine the public url for the pairing code based on best setup
   connection=""
   publicURL=""
 
@@ -411,7 +411,7 @@ if [ "$1" = "1" ] || [ "$1" = "on" ]; then
     if [ "${runBehindTor}" = "on" ]; then
       # make sure to keep in sync with internet.tor.sh script
       /home/admin/config.scripts/internet.hiddenservice.sh sphinxrelay 80 3302 443 3303
-      # get TOR address and store it readable for sphixrelay user
+      # get TOR address and store it readable for sphinxrelay user
       toraddress=$(sudo cat /mnt/hdd/tor/sphinxrelay/hostname 2>/dev/null)
       sudo -u sphinxrelay bash -c "echo '${toraddress}' > /home/sphinxrelay/sphinx-relay/dist/toraddress.txt"
     fi

home.admin/config.scripts/bonus.stacking-sats-kraken.sh

@@ -58,7 +58,7 @@ KRAKEN_API_SECRET="privateKeyFromTheKrakenSettings"
 KRAKEN_API_FIAT="USD"
 KRAKEN_BUY_AMOUNT=21
 
-# Enable this to buy at market price instad of placing a limit order
+# Enable this to buy at market price instead of placing a limit order
 # KRAKEN_ORDER_TYPE="market"
 
 # Pay fee in this currency, e.g. buying XBT for USD and paying fee in XBT

home.admin/config.scripts/bonus.telegraf.sh

@@ -64,7 +64,7 @@ fi
 # switch on
 if [ "$1" = "1" ] || [ "$1" = "on" ]; then
   echo "*** INSTALL TELEGRAF ***"
-  # soure and target dir for copy operation
+  # source and target dir for copy operation
   telegraf_source_dir=${resources_dir}
   telegraf_target_dir=/etc/telegraf
   #
@@ -72,7 +72,7 @@ if [ "$1" = "1" ] || [ "$1" = "on" ]; then
   telegraf_conf_file=${telegraf_target_dir}/telegraf.conf
 
   echo "*** telegraf installation: apt-get part"
-  # get the repository publy key for apt-get
+  # get the repository public key for apt-get
   curl -sL https://repos.influxdata.com/influxdb.key | sudo apt-key add -
   DISTRIB_ID=$(lsb_release -c -s)
   # 
@@ -122,7 +122,7 @@ if [ "$1" = "1" ] || [ "$1" = "on" ]; then
   #   telegrafInfluxPassword
   #
   echo "*** telegraf installation: telegrafInfluxUrl      = '${telegrafInfluxUrl}'"
-  # due to the occurance of '/' in the ${telegrafInfluxUrl} we need to switch to '#' as the sed-separator
+  # due to the occurrence of '/' in the ${telegrafInfluxUrl} we need to switch to '#' as the sed-separator
   sudo sed -i "s#^urls = .*#urls = \[\"${telegrafInfluxUrl}\"\]#g" ${telegraf_conf_file}
   #
   # the other replacements work with the std separator '/'

home.admin/config.scripts/bonus.zerotier.sh

@@ -24,7 +24,7 @@ whiptail --title " Info ZeroTier " --msgbox "\n\
 Manage your ZeroTier account at https://my.zerotier.com. Add additional devices
 (desktop/laptop/mobile) to your network so they can communicate.\n\n\
 
-Currentlly connected to: $(echo $networkDetails | awk '{ print $3}')\n
+Currently connected to: $(echo $networkDetails | awk '{ print $3}')\n
 Assigned IP: $(echo $networkDetails | awk '{ print $9}')\n\n\
 
 Find more information on how to get started:\n

home.admin/config.scripts/dropbox.upload.sh

@@ -34,7 +34,7 @@ https://github.com/rootzoll/raspiblitz/#a-dropbox-backup-target" 11 70 2>/home/a
     shred -u /home/admin/.tmp
   fi
 
-  # set in config - that acivates the dropbox back in background process
+  # set in config - that activates the dropbox back in background process
   if [ ${#authtoken} -gt 0 ]; then
     if [ ${#dropboxBackupTarget} -eq 0 ]; then
       echo "dropboxBackupTarget='${authtoken}'" >> /mnt/hdd/raspiblitz.conf
@@ -118,7 +118,7 @@ elif [ "${MODE}" == "upload" ]; then
   fi
 
 else
-  echo "err='unkown mode'"
+  echo "err='unknown mode'"
   exit 1
 fi
 

home.admin/config.scripts/internet.dns.sh

@@ -29,7 +29,7 @@ if [ "${DNSSERVER}" = "test" ]; then
 
   # dns is not working --> ask in dialog to set a preset DNS
   whiptail --title ' DNS Test Failed ' --yes-button='Set DNS 1.1.1.1' --no-button='Ignore' --yesno "It looks like your DNS within local network is not working.\n
-Do you want to set the fixed DNS 1.1.1.1 by cloudfare (they claim they provide privacy) for your RaspiBlitz and reboot?\n
+Do you want to set the fixed DNS 1.1.1.1 by Cloudflare (they claim they provide privacy) for your RaspiBlitz and reboot?\n
 " 10 64
   if [ $? -eq 0 ]; then
     echo "# SETTING 1.1.1.1"

home.admin/config.scripts/internet.sh

@@ -31,19 +31,19 @@ isValidIP() {
     # IPv6
     echo 1
   else
-    # unkown
+    # unknown
     echo 0
   fi
 }
 
 #############################################
-# by deafult ipv6 is off (for publicIP)
+# by default ipv6 is off (for publicIP)
 if [ "${ipv6}" = "" ]; then
   ipv6="off"
 fi
 
 #############################################
-# get active network device (eth0 or wlan0) & trafiic
+# get active network device (eth0 or wlan0) & traffic
 networkDevice=$(ip addr | grep -v "lo:" | grep 'state UP' | tr -d " " | cut -d ":" -f2 | head -n 1)
 # get network traffic
 # ifconfig does not show eth0 on Armbian or in a VM - get first traffic info
@@ -164,11 +164,11 @@ if [ ${runGlobal} -eq 1 ]; then
 
   ##########################################
   # Public IP
-  # the public that is maybe set by raspibitz config file (overriding aut-detection)
+  # the public that is maybe set by raspiblitz config file (overriding aut-detection)
   if [ "${publicIP}" == "" ]; then
     # if publicIP is not set by config ... use detected global IP
     if [ "${ipv6}" == "on" ]; then
-      # use ipv6 with brackes so that it can be used in http addresses like a IPv4
+      # use ipv6 with brackets so that it can be used in http addresses like a IPv4
       publicIP="[${globalIP}]"
     else
       publicIP="${globalIP}"
@@ -201,7 +201,7 @@ if [ "$1" == "status" ]; then
     echo "globalip=${globalIP}"
     echo "# publicip --> may consider the static IP overide by raspiblitz config"
     echo "publicip=${publicIP}"
-    echo "# cleanip --> the publicip with no brakets like used on IPv6"
+    echo "# cleanip --> the publicip with no brackets like used on IPv6"
     echo "cleanip=${cleanIP}"
   else
     echo "# for more global internet info use 'status global'"
@@ -219,7 +219,7 @@ elif [ "$1" == "update-publicip" ]; then
   else
     echo "ip_changed=1"
     if [ "${ipv6}" == "on" ]; then
-      # use ipv6 with brackes so that it can be used in http addresses like a IPv4
+      # use ipv6 with brackets so that it can be used in http addresses like a IPv4
       publicIP="[${globalIP}]"
     else
       publicIP="${globalIP}"

home.admin/config.scripts/internet.sshpubkey.sh

@@ -5,7 +5,7 @@ if [ $# -eq 0 ] || [ "$1" = "-h" ] || [ "$1" = "-help" ]; then
  echo "# config script to init/show/transfer ssh pub keys."
  echo "# -> return pubkey (and will init if needed):"
  echo "# internet.sshpubkey.sh get"
- echo "# -> transfer ssh-pub to a authorizedkey of remote server:"
+ echo "# -> transfer ssh-pub to a authorized key of remote server:"
  echo "# internet.sshpubkey.sh transfer [REMOTEUSER]@[REMOTESERVER]"
  echo "err='just informational output'"
  exit 1

home.admin/config.scripts/internet.sshtunnel.py

@@ -4,7 +4,7 @@ import re
 import subprocess
 import sys
 
-# IDEA: At the momemt its just Reverse-SSh Tunnels thats why [INTERNAL-PORT]<[EXTERNAL-PORT]
+# IDEA: At the moment its just Reverse-SSH Tunnels thats why [INTERNAL-PORT]<[EXTERNAL-PORT]
 # For the future also just local ssh tunnels could be added with [INTERNAL-PORT]-[EXTERNAL-PORT]
 # for the use case when a server wants to use a RaspiBlitz behind a NAT as Lightning backend
 

home.admin/config.scripts/internet.tor.sh

@@ -388,7 +388,7 @@ EOF
     sudo -u sphinxrelay bash -c "echo '${toraddress}' > /home/sphinxrelay/sphinx-relay/dist/toraddress.txt"
   fi
 
-    # get TOR address and store it readable for sphixrelay user
+    # get TOR address and store it readable for sphinxrelay user
     toraddress=$(sudo cat /mnt/hdd/tor/sphinxrelay/hostname 2>/dev/null)
     sudo -u sphinxrelay bash -c "echo '${toraddress}' > /home/sphinxrelay/sphinx-relay/dist/toraddress.txt"
 

home.admin/config.scripts/internet.wifi.sh

@@ -55,7 +55,7 @@ network={
 
   # activate new wifi settings
   sudo wpa_cli -i wlan0 reconfigure 1>/dev/null
-  echo "# OK - changes should be actrive now - maybe reboot needed"
+  echo "# OK - changes should be active now - maybe reboot needed"
   exit 0
 
 elif [ "$1" == "off" ]; then
@@ -73,7 +73,7 @@ update_config=1"
 
   # activate new wifi settings
   sudo wpa_cli -i wlan0 reconfigure 1>/dev/null
-  echo "# OK - changes should be actrive now - maybe reboot needed"
+  echo "# OK - changes should be active now - maybe reboot needed"
   exit 0
 
 # https://github.com/rootzoll/raspiblitz/issues/560

home.admin/config.scripts/lnd.autonat.sh

@@ -61,6 +61,6 @@ if [ "$1" = "0" ] || [ "$1" = "off" ]; then
   exit 0
 fi
 
-echo "FAIL - Unknown Paramter $1"
+echo "FAIL - Unknown Parameter $1"
 echo "may needs reboot to run normal again"
 exit 1

home.admin/config.scripts/lnd.autopilot.sh

@@ -58,6 +58,6 @@ if [ "$1" = "0" ] || [ "$1" = "off" ]; then
   exit 0
 fi
 
-echo "FAIL - Unknown Paramter $1"
+echo "FAIL - Unknown Parameter $1"
 echo "may needs reboot to run normal again"
 exit 1

home.admin/config.scripts/lnd.autounlock.sh

@@ -100,7 +100,7 @@ if [ "$1" = "0" ] || [ "$1" = "off" ]; then
   # setting value in raspi blitz config
   sudo sed -i "s/^autoUnlock=.*/autoUnlock=off/g" /mnt/hdd/raspiblitz.conf
 
-  # delete password C securly
+  # delete password C securely
   echo "# shredding password on for RaspiBlitz Auto-Unlock"
   sudo shred -u /root/lnd.autounlock.pwd 2>/dev/null
 

home.admin/config.scripts/lnd.check.sh

@@ -131,7 +131,7 @@ if [ "$1" == "basic-setup" ]; then
   else
     echo "macaroonCopy=0"
     echo "macaroonMismatch=0"
-    echo "err='admin.macaroon is missing for user admin"
+    echo "err='admin.macaroon is missing for user admin'"
   fi
 
   # check for walletDB exist

home.admin/config.scripts/lnd.credentials.sh

@@ -26,7 +26,7 @@ function copy_mac_set_perms() {
 }
 
 function check_macaroons() {
-macaroons="admin.macaroon invoice.macaroon readonly.macaroon invoices.macaroon chainnotifier.macaroon signer.macaroon  walletkit.macaroon router.macaroon"
+macaroons="admin.macaroon invoice.macaroon readonly.macaroon invoices.macaroon chainnotifier.macaroon signer.macaroon walletkit.macaroon router.macaroon"
 missing=0
 for macaroon in $macaroons
 do
@@ -67,7 +67,7 @@ if [ "$1" = "reset" ]; then
     keepOldMacaroons=0
   fi
   if [ "$2" == "keepold" ]; then
-    echo "# add the missing default macaroons without deauthenticating the old ones"
+    echo "# add the missing default macaroons without de-authenticating the old ones"
     resetTLS=0
     resetMacaroons=1
     keepOldMacaroons=1

home.admin/config.scripts/lnd.setport.sh

@@ -11,7 +11,7 @@ fi
 
 portnumber=$1
 
-# check port numer is a integer
+# check port number is a integer
 if ! [ "$portnumber" -eq "$portnumber" ] 2> /dev/null
 then
   echo "FAIL - portnumber(${portnumber}) not a number"

home.admin/config.scripts/lnd.update.sh

@@ -168,7 +168,7 @@ if [ "${mode}" = "verified" ]; then
   echo "fingerprint='${fingerprint}'"
 
   echo 
-  echo "# checking gpg finger print"
+  echo "# checking PGP finger print"
   gpg --import ./pgp_keys.asc
   sleep 3
   verifyResult=$(gpg --verify manifest-${PGPauthor}-v${lndUpdateVersion}.sig manifest-v${lndUpdateVersion}.txt 2>&1)

home.admin/config.scripts/network.monitor.sh

@@ -94,10 +94,10 @@ if [ "$1" = "peer-kickstart" ]; then
   fi
   # check valid value
   if [ "${addressFormat}" != "ipv4" ] && [ "${addressFormat}" != "ipv6" ] && [ "${addressFormat}" != "tor" ] && [ "${addressFormat}" != "auto" ]; then
-    echo "error='unvalid network type'"
+    echo "error='invalid network type'"
     exit 1
   fi
-  # if auto then deterine whats running
+  # if auto then determine whats running
   if [ "${addressFormat}" == "auto" ]; then
     if [ "${runBehindTor}" == "on" ]; then
       addressFormat="tor"
@@ -123,8 +123,8 @@ if [ "$1" = "peer-kickstart" ]; then
     # get IPv6 nodes
     nodeList=$(echo "${bitnodesRawData}" | grep -o '\[.\{5,45\}\]\:[0-9]\{3,5\}')
   else
-    # unvalid address
+    # invalid address
-    echo "error='unvalid 2nd parameter'"
+    echo "error='invalid 2nd parameter'"
     exit 1
   fi
   #echo "${nodeList}"

home.admin/config.scripts/network.upnp.sh

@@ -69,6 +69,6 @@ if [ "$1" = "0" ] || [ "$1" = "off" ]; then
   exit 0
 fi
 
-echo "FAIL - Unknown Paramter $1"
+echo "FAIL - Unknown Parameter $1"
 echo "may needs reboot to run normal again"
 exit 1