mirror of
https://github.com/raspiblitz/raspiblitz.git
synced 2025-09-27 20:16:22 +02:00
refector system-init on boostrap
This commit is contained in:
rootzoll
@@ -26,37 +26,7 @@ logFile="/home/admin/raspiblitz.log"
|
||||
# used by display and later setup steps
|
||||
infoFile="/home/admin/raspiblitz.info"
|
||||
|
||||
|
||||
# FUNCTIONS to be used later on in the script
|
||||
|
||||
# wait until raspberry pi gets a local IP
|
||||
function wait_for_local_network() {
|
||||
gotLocalIP=0
|
||||
until [ ${gotLocalIP} -eq 1 ]
|
||||
do
|
||||
localip=$(ip addr | grep 'state UP' -A2 | egrep -v 'docker0|veth' | egrep -i '(*[eth|ens|enp|eno|wlan|wlp][0-9]$)' | tail -n1 | awk '{print $2}' | cut -f1 -d'/')
|
||||
if [ ${#localip} -eq 0 ]; then
|
||||
configWifiExists=$(sudo cat /etc/wpa_supplicant/wpa_supplicant.conf 2>/dev/null| grep -c "network=")
|
||||
if [ ${configWifiExists} -eq 0 ]; then
|
||||
# display user to connect LAN
|
||||
sed -i "s/^state=.*/state=noIP/g" ${infoFile}
|
||||
sed -i "s/^message=.*/message='Connect the LAN/WAN'/g" ${infoFile}
|
||||
else
|
||||
# display user that wifi settings are not working
|
||||
sed -i "s/^state=.*/state=noIP/g" ${infoFile}
|
||||
sed -i "s/^message=.*/message='WIFI Settings not working'/g" ${infoFile}
|
||||
fi
|
||||
elif [ "${localip:0:4}" = "169." ]; then
|
||||
# display user waiting for DHCP
|
||||
sed -i "s/^state=.*/state=noDCHP/g" ${infoFile}
|
||||
sed -i "s/^message=.*/message='Waiting for DHCP'/g" ${infoFile}
|
||||
else
|
||||
gotLocalIP=1
|
||||
fi
|
||||
sleep 1
|
||||
done
|
||||
}
|
||||
|
||||
# Init boostrap log file
|
||||
echo "Writing logs to: ${logFile}"
|
||||
echo "" > $logFile
|
||||
echo "***********************************************" >> $logFile
|
||||
@@ -74,6 +44,10 @@ displayClass="lcd"
|
||||
displayType=""
|
||||
fundRecovery=0
|
||||
|
||||
################################
|
||||
# INIT raspiblitz.info
|
||||
################################
|
||||
|
||||
# try to load old values if available (overwrites defaults)
|
||||
source ${infoFile} 2>/dev/null
|
||||
|
||||
@@ -98,6 +72,119 @@ if [ "${setupStep}" != "100" ]; then
|
||||
fi
|
||||
sudo chmod 777 ${infoFile}
|
||||
|
||||
######################################
|
||||
# SECTION FOR POSSIBLE REBOOT ACTIONS
|
||||
systemInitReboot=0
|
||||
|
||||
################################
|
||||
# FORCED SWITCH TO HDMI
|
||||
# if a file called 'hdmi' gets
|
||||
# placed onto the boot part of
|
||||
# the sd card - switch to hdmi
|
||||
################################
|
||||
|
||||
forceHDMIoutput=$(sudo ls /boot/hdmi* 2>/dev/null | grep -c hdmi)
|
||||
if [ ${forceHDMIoutput} -eq 1 ]; then
|
||||
# delete that file (to prevent loop)
|
||||
sudo rm /boot/hdmi*
|
||||
# switch to HDMI what will trigger reboot
|
||||
echo "HDMI switch found ... activating HDMI display output & reboot" >> $logFile
|
||||
sudo /home/admin/config.scripts/blitz.display.sh set-display hdmi >> $logFile
|
||||
systemInitReboot=1
|
||||
else
|
||||
echo "No HDMI switch found. " >> $logFile
|
||||
fi
|
||||
|
||||
################################
|
||||
# SSH SERVER CERTS RESET
|
||||
# if a file called 'ssh.reset' gets
|
||||
# placed onto the boot part of
|
||||
# the sd card - delete old ssh data
|
||||
################################
|
||||
|
||||
sshReset=$(sudo ls /boot/ssh.reset* 2>/dev/null | grep -c reset)
|
||||
if [ ${sshReset} -eq 1 ]; then
|
||||
# delete that file (to prevent loop)
|
||||
sudo rm /boot/ssh.reset* >> $logFile
|
||||
# delete ssh certs
|
||||
echo "SSHRESET switch found ... stopping SSH and deleting old certs" >> $logFile
|
||||
sudo systemctl stop sshd >> $logFile
|
||||
sudo rm /mnt/hdd/ssh/ssh_host* >> $logFile
|
||||
sudo ssh-keygen -A >> $logFile
|
||||
systemInitReboot=1
|
||||
else
|
||||
echo "No SSHRESET switch found. " >> $logFile
|
||||
fi
|
||||
|
||||
################################
|
||||
# FS EXPAND
|
||||
# if a file called 'ssh.reset' gets
|
||||
# placed onto the boot part of
|
||||
# the sd card - delete old ssh data
|
||||
################################
|
||||
source <(sudo /home/admin/config.scripts/blitz.bootdrive.sh status)
|
||||
if [ "${needsExpansion}" == "1" ] && [ "${fsexpanded}" == "0" ]; then
|
||||
echo "FSEXPAND needed ... starting process" >> $logFile
|
||||
sudo /home/admin/config.scripts/blitz.bootdrive.sh status >> $logFile
|
||||
sudo /home/admin/config.scripts/blitz.bootdrive.sh fsexpand >> $logFile
|
||||
systemInitReboot=1
|
||||
else
|
||||
echo "No FS EXPAND needed. needsExpansion(${needsExpansion}) fsexpanded(${fsexpanded})" >> $logFile
|
||||
fi
|
||||
|
||||
################################
|
||||
# UASP FIX - first try
|
||||
# if HDD is connected on start
|
||||
################################
|
||||
source <(sudo /home/admin/config.scripts/blitz.datadrive.sh uasp-fix)
|
||||
if [ "${neededReboot}" == "1" ]; then
|
||||
echo "UASP FIX applied (1st-try) ... reboot needed." >> $logFile
|
||||
systemInitReboot=1
|
||||
else
|
||||
echo "No UASP FIX needed (1st-try)." >> $logFile
|
||||
fi
|
||||
|
||||
######################################
|
||||
# CHECK IF REBOOT IS NEEDED
|
||||
# from actions above
|
||||
|
||||
if [ "${systemInitReboot}" == "1" ]; then
|
||||
sudo cp ${logFile} ${logFile}.systeminit
|
||||
sudo sed -i "s/^state=.*/state=reboot/g" ${infoFile}
|
||||
sudo shutdown -r now
|
||||
sleep 100
|
||||
exit 0
|
||||
fi
|
||||
|
||||
################################
|
||||
# BOOT LOGO
|
||||
################################
|
||||
|
||||
# display 3 secs logo - try to kickstart LCD
|
||||
# see https://github.com/rootzoll/raspiblitz/issues/195#issuecomment-469918692
|
||||
# see https://github.com/rootzoll/raspiblitz/issues/647
|
||||
# see https://github.com/rootzoll/raspiblitz/pull/1580
|
||||
randnum=$(shuf -i 0-7 -n 1)
|
||||
/home/admin/config.scripts/blitz.display.sh image /home/admin/raspiblitz/pictures/startlogo${randnum}.png
|
||||
sleep 5
|
||||
/home/admin/config.scripts/blitz.display.sh hide
|
||||
|
||||
################################
|
||||
# GENERATE UNIQUE SSH PUB KEYS
|
||||
# on first boot up
|
||||
################################
|
||||
|
||||
numberOfPubKeys=$(sudo ls /etc/ssh/ | grep -c 'ssh_host_')
|
||||
if [ ${numberOfPubKeys} -eq 0 ]; then
|
||||
echo "*** Generating new SSH PubKeys" >> $logFile
|
||||
sudo dpkg-reconfigure openssh-server
|
||||
echo "OK" >> $logFile
|
||||
fi
|
||||
|
||||
################################
|
||||
# CLEANING BOOT SYSTEM
|
||||
################################
|
||||
|
||||
# resetting start count files
|
||||
echo "SYSTEMD RESTART LOG: blockchain (bitcoind/litecoind)" > /home/admin/systemd.blockchain.log
|
||||
echo "SYSTEMD RESTART LOG: lightning (LND)" > /home/admin/systemd.lightning.log
|
||||
@@ -129,127 +216,15 @@ fi
|
||||
echo ""
|
||||
|
||||
###############################
|
||||
# RAID data check (BRTFS)
|
||||
###############################
|
||||
# see https://github.com/rootzoll/raspiblitz/issues/360#issuecomment-467698260
|
||||
# WAIT FOR ALL SERVICES
|
||||
|
||||
# get the state of data drive
|
||||
source <(sudo /home/admin/config.scripts/blitz.datadrive.sh status)
|
||||
if [ ${isRaid} -eq 1 ]; then
|
||||
echo "TRIGGERING BTRFS RAID DATA CHECK ..."
|
||||
echo "Check status with: sudo btrfs scrub status /mnt/hdd/"
|
||||
sudo btrfs scrub start /mnt/hdd/
|
||||
fi
|
||||
|
||||
################################
|
||||
# BOOT LOGO
|
||||
# WAIT LOOP UNTIL HDD CONNECTED
|
||||
################################
|
||||
|
||||
# display 3 secs logo - try to kickstart LCD
|
||||
# see https://github.com/rootzoll/raspiblitz/issues/195#issuecomment-469918692
|
||||
# see https://github.com/rootzoll/raspiblitz/issues/647
|
||||
# see https://github.com/rootzoll/raspiblitz/pull/1580
|
||||
randnum=$(shuf -i 0-7 -n 1)
|
||||
/home/admin/config.scripts/blitz.display.sh image /home/admin/raspiblitz/pictures/startlogo${randnum}.png
|
||||
sleep 5
|
||||
/home/admin/config.scripts/blitz.display.sh hide
|
||||
|
||||
################################
|
||||
# GENERATE UNIQUE SSH PUB KEYS
|
||||
# on first boot up
|
||||
################################
|
||||
|
||||
numberOfPubKeys=$(sudo ls /etc/ssh/ | grep -c 'ssh_host_')
|
||||
if [ ${numberOfPubKeys} -eq 0 ]; then
|
||||
echo "*** Generating new SSH PubKeys" >> $logFile
|
||||
sudo dpkg-reconfigure openssh-server
|
||||
echo "OK" >> $logFile
|
||||
fi
|
||||
|
||||
################################
|
||||
# AFTER BOOT SCRIPT
|
||||
# when a process needs to
|
||||
# execute stuff after a reboot
|
||||
# it should in file
|
||||
# /home/admin/setup.sh
|
||||
################################
|
||||
|
||||
# check for after boot script
|
||||
afterSetupScriptExists=$(ls /home/admin/setup.sh 2>/dev/null | grep -c setup.sh)
|
||||
if [ ${afterSetupScriptExists} -eq 1 ]; then
|
||||
echo "*** SETUP SCRIPT DETECTED ***"
|
||||
# LCD info
|
||||
sudo sed -i "s/^state=.*/state=recovering/g" ${infoFile}
|
||||
sudo sed -i "s/^message=.*/message='After Boot Setup (takes time)'/g" ${infoFile}
|
||||
# echo out script to journal logs
|
||||
sudo cat /home/admin/setup.sh
|
||||
# execute the after boot script
|
||||
echo "Logs in stored to: /home/admin/raspiblitz.log.recover"
|
||||
echo "\n***** RUNNING AFTER BOOT SCRIPT ******** " >> ${logFile}
|
||||
sudo /home/admin/setup.sh >> ${logFile}
|
||||
# delete the after boot script
|
||||
sudo rm /home/admin/setup.sh
|
||||
# reboot again
|
||||
echo "DONE wait 10 secs ... one more reboot needed ... " >> ${logFile}
|
||||
sudo cp ${logFile} ${logFile}.afterboot
|
||||
sudo shutdown -r now
|
||||
sleep 100
|
||||
exit 0
|
||||
fi
|
||||
|
||||
################################
|
||||
# FORCED SWITCH TO HDMI
|
||||
# if a file called 'hdmi' gets
|
||||
# placed onto the boot part of
|
||||
# the sd card - switch to hdmi
|
||||
################################
|
||||
|
||||
forceHDMIoutput=$(sudo ls /boot/hdmi* 2>/dev/null | grep -c hdmi)
|
||||
if [ ${forceHDMIoutput} -eq 1 ]; then
|
||||
# delete that file (to prevent loop)
|
||||
sudo rm /boot/hdmi*
|
||||
# switch to HDMI what will trigger reboot
|
||||
echo "Yes HDMI switch found ... activating HDMI display output & reboot" >> $logFile
|
||||
sudo /home/admin/config.scripts/blitz.display.sh set-display hdmi >> $logFile
|
||||
sudo cp ${logFile} ${logFile}.hdmiswitch
|
||||
sudo shutdown -r now
|
||||
sleep 100
|
||||
exit 0
|
||||
else
|
||||
echo "No HDMI switch found. " >> $logFile
|
||||
fi
|
||||
|
||||
################################
|
||||
# SSH SERVER CERTS RESET
|
||||
# if a file called 'ssh.reset' gets
|
||||
# placed onto the boot part of
|
||||
# the sd card - delete old ssh data
|
||||
################################
|
||||
|
||||
sshReset=$(sudo ls /boot/ssh.reset* 2>/dev/null | grep -c reset)
|
||||
if [ ${sshReset} -eq 1 ]; then
|
||||
# delete that file (to prevent loop)
|
||||
sudo rm /boot/ssh.reset* >> $logFile
|
||||
# show info ssh reset
|
||||
sed -i "s/^state=.*/state=sshreset/g" ${infoFile}
|
||||
sed -i "s/^message=.*/message='resetting SSH & reboot'/g" ${infoFile}
|
||||
# delete ssh certs
|
||||
sudo systemctl stop sshd >> $logFile
|
||||
sudo rm /mnt/hdd/ssh/ssh_host* >> $logFile
|
||||
sudo ssh-keygen -A >> $logFile
|
||||
echo "SSH SERVER CERTS RESET ... (reboot) " >> $logFile
|
||||
sudo cp ${logFile} ${logFile}.sshcerts
|
||||
sudo shutdown -r now
|
||||
sleep 100
|
||||
exit 0
|
||||
fi
|
||||
|
||||
################################
|
||||
# HDD CHECK & PRE-INIT
|
||||
################################
|
||||
|
||||
# Without LCD message needs to be printed
|
||||
# wait loop until HDD is connected
|
||||
echo ""
|
||||
until [ ${isMounted} -eq 1 ] || [ ${#hddCandidate} -gt 0 ]
|
||||
do
|
||||
source <(sudo /home/admin/config.scripts/blitz.datadrive.sh status)
|
||||
@@ -264,40 +239,70 @@ do
|
||||
sleep 2
|
||||
done
|
||||
|
||||
####################################
|
||||
# WIFI RESTORE from HDD works with
|
||||
# mem copy from datadrive inspection
|
||||
####################################
|
||||
|
||||
# check if there is a WIFI configuration to backup or restore
|
||||
/home/admin/config.scripts/internet.wifi.sh backup-restore >> $logFile
|
||||
|
||||
################################
|
||||
# UASP FIX - second try
|
||||
# when HDD gets connected later
|
||||
################################
|
||||
source <(sudo /home/admin/config.scripts/blitz.datadrive.sh uasp-fix)
|
||||
if [ "${neededReboot}" == "1" ]; then
|
||||
echo "UASP FIX applied (2st-try) ... reboot needed." >> $logFile
|
||||
sudo cp ${logFile} ${logFile}.uasp
|
||||
sudo sed -i "s/^state=.*/state=reboot/g" ${infoFile}
|
||||
sudo shutdown -r now
|
||||
sleep 100
|
||||
exit 0
|
||||
else
|
||||
echo "No UASP FIX needed (2st-try)." >> $logFile
|
||||
fi
|
||||
|
||||
gotLocalIP=0
|
||||
until [ ${gotLocalIP} -eq 1 ]
|
||||
do
|
||||
source <(/home/admin/config.scripts/internet.sh status)
|
||||
if [ ${dhcp} -eq 0 ]; then
|
||||
# display user waiting for DHCP
|
||||
sed -i "s/^state=.*/state=noDCHP/g" ${infoFile}
|
||||
sed -i "s/^message=.*/message='Waiting for DHCP'/g" ${infoFile}
|
||||
elif [ ${#localip} -eq 0 ]; then
|
||||
if [ ${configWifiExists} -eq 0 ]; then
|
||||
# display user to connect LAN
|
||||
sed -i "s/^state=.*/state=noIP/g" ${infoFile}
|
||||
sed -i "s/^message=.*/message='Connect the LAN/WAN'/g" ${infoFile}
|
||||
else
|
||||
# display user that wifi settings are not working
|
||||
sed -i "s/^state=.*/state=noIP/g" ${infoFile}
|
||||
sed -i "s/^message=.*/message='WIFI Settings not working'/g" ${infoFile}
|
||||
fi
|
||||
elif [ ${online} -eq 0 ]; then
|
||||
# display user that wifi settings are not working
|
||||
sed -i "s/^state=.*/state=noInternet/g" ${infoFile}
|
||||
sed -i "s/^message=.*/message='No connection to Internet'/g" ${infoFile}
|
||||
else
|
||||
gotLocalIP=1
|
||||
fi
|
||||
sleep 1
|
||||
done
|
||||
|
||||
# write info for LCD
|
||||
sed -i "s/^state=.*/state=booting/g" ${infoFile}
|
||||
sed -i "s/^message=.*/message='please wait'/g" ${infoFile}
|
||||
|
||||
# TODO: REMOVE LATER AGAIN
|
||||
echo "DEBUG EXIT BREAK" >> $logFile
|
||||
exit 1
|
||||
|
||||
# get fresh info about data drive to continue
|
||||
source <(sudo /home/admin/config.scripts/blitz.datadrive.sh status)
|
||||
echo "isMounted: $isMounted" >> $logFile
|
||||
|
||||
# check if UASP is already deactivated (on RaspiOS)
|
||||
# https://www.pragmaticlinux.com/2021/03/fix-for-getting-your-ssd-working-via-usb-3-on-your-raspberry-pi/
|
||||
cmdlineExists=$(sudo ls /boot/cmdline.txt 2>/dev/null | grep -c "cmdline.txt")
|
||||
if [ ${cmdlineExists} -eq 1 ] && [ ${#hddAdapterUSB} -gt 0 ] && [ ${hddAdapterUSAP} -eq 0 ]; then
|
||||
echo "Checking for UASP deactivation ..." >> $logFile
|
||||
usbQuirkActive=$(sudo cat /boot/cmdline.txt | grep -c "usb-storage.quirks=")
|
||||
# check if its maybe other device
|
||||
usbQuirkDone=$(sudo cat /boot/cmdline.txt | grep -c "usb-storage.quirks=${hddAdapterUSB}:u")
|
||||
if [ ${usbQuirkActive} -gt 0 ] && [ ${usbQuirkDone} -eq 0 ]; then
|
||||
# remove old usb-storage.quirks
|
||||
sudo sed -i "s/usb-storage.quirks=[^ ]* //g" /boot/cmdline.txt
|
||||
fi
|
||||
if [ ${usbQuirkDone} -eq 0 ]; then
|
||||
# add new usb-storage.quirks
|
||||
sudo sed -i "1s/^/usb-storage.quirks=${hddAdapterUSB}:u /" /boot/cmdline.txt
|
||||
sudo cat /boot/cmdline.txt >> $logFile
|
||||
# go into reboot to activate new setting
|
||||
echo "DONE deactivating UASP for ${hddAdapterUSB} ... one more reboot needed ... " >> $logFile
|
||||
sudo cp ${logFile} ${logFile}.uasp
|
||||
sudo shutdown -r now
|
||||
sleep 100
|
||||
fi
|
||||
else
|
||||
echo "Skipping UASP deactivation ... cmdlineExists(${cmdlineExists}) hddAdapterUSB(${hddAdapterUSB}) hddAdapterUSAP(${hddAdapterUSAP})" >> $logFile
|
||||
fi
|
||||
|
||||
# check if the HDD is auto-mounted ( auto-mounted = setup-done)
|
||||
if [ ${isMounted} -eq 0 ]; then
|
||||
|
||||
@@ -337,15 +342,6 @@ if [ ${isMounted} -eq 0 ]; then
|
||||
echo "Refreshing links between directories/drives .." >> $logFile
|
||||
sudo /home/admin/config.scripts/blitz.datadrive.sh link
|
||||
|
||||
# check if there is a WIFI configuration to backup or restore
|
||||
sudo /home/admin/config.scripts/internet.wifi.sh backup-restore
|
||||
|
||||
# make sure at this point local network is connected
|
||||
wait_for_local_network
|
||||
|
||||
# make sure before update/recovery that a internet connection is working
|
||||
wait_for_local_internet
|
||||
|
||||
# check if HDD contains already a configuration
|
||||
configExists=$(ls ${configFile} | grep -c '.conf')
|
||||
echo "HDD contains already a configuration: ${configExists}" >> $logFile
|
||||
@@ -411,9 +407,6 @@ if [ ${isMounted} -eq 0 ]; then
|
||||
|
||||
fi # END - no automount - after this HDD is mounted
|
||||
|
||||
# make sure at this point local network is connected
|
||||
wait_for_local_network
|
||||
|
||||
# if a WIFI config exists backup to HDD
|
||||
configWifiExists=$(sudo cat /etc/wpa_supplicant/wpa_supplicant.conf 2>/dev/null| grep -c "network=")
|
||||
if [ ${configWifiExists} -eq 1 ]; then
|
||||
@@ -592,6 +585,17 @@ else
|
||||
echo "OK: Temp cleaned" >> $logFile
|
||||
fi
|
||||
|
||||
###############################
|
||||
# RAID data check (BRTFS)
|
||||
###############################
|
||||
# see https://github.com/rootzoll/raspiblitz/issues/360#issuecomment-467698260
|
||||
|
||||
if [ ${isRaid} -eq 1 ]; then
|
||||
echo "TRIGGERING BTRFS RAID DATA CHECK ..."
|
||||
echo "Check status with: sudo btrfs scrub status /mnt/hdd/"
|
||||
sudo btrfs scrub start /mnt/hdd/
|
||||
fi
|
||||
|
||||
######################################
|
||||
# PREPARE SUBSCRIPTIONS DATA DIRECTORY
|
||||
######################################
|
||||
|
||||
Reference in New Issue
Block a user