revert LCD install befiore testing DietPi on rPI

build.sdcard/raspbianStretchDesktop.sh

@@ -548,37 +548,34 @@ echo "IMPORTANT IF WANT TO MAKE A RELEASE IMAGE FROM THIS BUILD:"
 echo "login once after reboot without HDD and run 'XXprepareRelease.sh'"
 echo ""
 echo "Press ENTER to install LCD and reboot ..."
-# don`t stop automatic install
+read key
-# read key
 
 # give Raspi a default hostname (optional)
 sudo raspi-config nonint do_hostname "RaspiBlitz"
 
 # *** Display selection ***
-#dialog --title "Display" --yesno "Are you using the default display available from Amazon?\nSelect 'No' if you are using the Swiss version from play-zone.ch!" 6 80
+dialog --title "Display" --yesno "Are you using the default display available from Amazon?\nSelect 'No' if you are using the Swiss version from play-zone.ch!" 6 80
-#defaultDisplay=$?
+defaultDisplay=$?
 
-# choosing between LCD-s during install makes dietpi automation stop - procedd with default LCD
+if [[ $defaultDisplay -eq 0 ]]
-
+then
-#if [[ $defaultDisplay -eq 0 ]]
-#then
   # *** RASPIBLITZ / LCD (at last - because makes a reboot) ***
   # based on https://www.elegoo.com/tutorial/Elegoo%203.5%20inch%20Touch%20Screen%20User%20Manual%20V1.00.2017.10.09.zip
-cd /home/admin/
+  cd /home/admin/
-sudo apt-mark hold raspberrypi-bootloader
+  sudo apt-mark hold raspberrypi-bootloader
-git clone https://github.com/goodtft/LCD-show.git
+  git clone https://github.com/goodtft/LCD-show.git
-sudo chmod -R 755 LCD-show
+  sudo chmod -R 755 LCD-show
-sudo chown -R admin:admin LCD-show
+  sudo chown -R admin:admin LCD-show
-cd LCD-show/
+  cd LCD-show/
-sudo ./LCD35-show
+  sudo ./LCD35-show
-#else
+else
-#  # Download and install the driver
+  # Download and install the driver
-#  # based on http://www.raspberrypiwiki.com/index.php/3.5_inch_TFT_800x480@60fps
+  # based on http://www.raspberrypiwiki.com/index.php/3.5_inch_TFT_800x480@60fps
-#
+
-#  cd /boot
+  cd /boot
-#  sudo wget http://www.raspberrypiwiki.com/download/RPI-HD-35-INCH-TFT/dt-blob-For-3B-plus.bin
+  sudo wget http://www.raspberrypiwiki.com/download/RPI-HD-35-INCH-TFT/dt-blob-For-3B-plus.bin
-#  sudo mv dt-blob-For-3B-plus.bin dt-blob.bin
+  sudo mv dt-blob-For-3B-plus.bin dt-blob.bin
-#  cat <<EOF >> config.txt
+  cat <<EOF >> config.txt
 
 dtparam=spi=off
 dtparam=i2c_arm=off
@@ -607,4 +604,4 @@ display_rotate=3
 dtoverlay=i2c-gpio,i2c_gpio_scl=24,i2c_gpio_sda=23
 EOF
   init 6
-#fi
+fi

dietpi/README.md

@@ -86,7 +86,7 @@ if you intend to use @openoms`s forked version:
 
 `wget https://raw.githubusercontent.com/openoms/raspiblitz/raspiblitz-dev/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh raspiblitz-dev openoms`
 
-See my example output: [sdcard_build_output](DietPi/sdcard_build_output)  
+See my example output on the Odorid HC1: [HC1_sdcard_build_output](logs/HC1_sdcard_build_output)  
 
 `ssh admin@[IP-OF-DROIDBLITZ]`  
 password: raspiblitz

dietpi/boot/dietpi.txt

@@ -173,7 +173,7 @@ CONFIG_PROXY_PASSWORD=
 CONFIG_BOOT_WAIT_FOR_NETWORK=2
 
 #DietPi checks for updates (allows dietpi to check for updates on a daily basis and boot using a <1kb file download.)
-CONFIG_CHECK_DIETPI_UPDATES=0
+CONFIG_CHECK_DIETPI_UPDATES=1
 #	Optional: Automatically update DietPi when updates are available. | requires CONFIG_CHECK_DIETPI_UPDATES=1
 CONFIG_AUTO_DIETPI_UPDATES=0
 
@@ -261,4 +261,4 @@ DEV_GITOWNER=Fourdee
 #------------------------------------------------------------------------------------------------------
 # D I E T - P I
 # Settings, automatically added by dietpi-update
-#------------------------------------------------------------------------------------------------------
+#------------------------------------------------------------------------------------------------------