mirror of
https://github.com/skot/ESP-Miner.git
synced 2025-04-07 11:28:05 +02:00
ff5b60b54e
* Update bm1397.c to increase the max frequency to 650Mhz The original version was setting everything above 500Mhz to 500Mhz, the update increases the limit to 650Mhz. No changes to the web interface - drop-down still shows up to 575Mhz * Update edit.component.ts to include higher freqeuncy for BM1397 * Updated BM1397 frequencies to above 500Mhz * Update bm1397.c * Update bm1397.c * UN-Update readme.md * Update bm1397.c * Update bm1397.c * Update bm1397.c
112 lines
2.9 KiB
Markdown
Executable File
112 lines
2.9 KiB
Markdown
Executable File
[](https://discord.gg/3E8ca2dkcC)
|
|
|
|
# ESP-Miner
|
|
|
|
| Supported Targets | ESP32-S3 (BitAxe v2+) |
|
|
| ----------------- | --------------------- |
|
|
|
|
## Requires Python3.4 or later and pip
|
|
|
|
Install bitaxetool from pip. pip is included with Python 3.4 but if you need to install it check <https://pip.pypa.io/en/stable/installation/>
|
|
|
|
```
|
|
pip install --upgrade bitaxetool
|
|
```
|
|
|
|
## Hardware Required
|
|
|
|
This firmware is designed to run on a BitAxe v2+
|
|
|
|
If you do have a Bitaxe with no USB connectivity make sure to establish a serial connection with either a JTAG ESP-Prog device or a USB-to-UART bridge
|
|
|
|
## Preconfiguration
|
|
|
|
Starting with v2.0.0, the ESP-Miner firmware requires some basic manufacturing data to be flashed in the NVS partition.
|
|
|
|
1. Download the esp-miner-factory-v2.0.3.bin file from the release tab.
|
|
Click [here](https://github.com/skot/ESP-Miner/releases) for the release tab
|
|
|
|
2. Copy `config.cvs.example` to `config.cvs` and modify `asicfrequency`, `asicvoltage`, `asicmodel`, `devicemodel`, and `boardversion`
|
|
|
|
The following are recommendations but it is necessary that you do have all values in your `config.cvs`file to flash properly.
|
|
|
|
- recommended values for the Bitaxe 1368 (supra)
|
|
|
|
```
|
|
key,type,encoding,value
|
|
main,namespace,,
|
|
asicfrequency,data,u16,490
|
|
asicvoltage,data,u16,1200
|
|
asicmodel,data,string,BM1368
|
|
devicemodel,data,string,supra
|
|
boardversion,data,string,400
|
|
```
|
|
|
|
- recommended values for the Bitaxe 1366 (ultra)
|
|
|
|
```
|
|
key,type,encoding,value
|
|
main,namespace,,
|
|
asicfrequency,data,u16,485
|
|
asicvoltage,data,u16,1200
|
|
asicmodel,data,string,BM1366
|
|
devicemodel,data,string,ultra
|
|
boardversion,data,string,0.11
|
|
```
|
|
|
|
- recomended values for the Bitaxe 1397 (MAX)
|
|
|
|
```
|
|
key,type,encoding,value
|
|
main,namespace,,
|
|
asicfrequency,data,u16,475
|
|
asicvoltage,data,u16,1400
|
|
asicmodel,data,string,BM1397
|
|
devicemodel,data,string,max
|
|
boardversion,data,string,2.2
|
|
```
|
|
|
|
## Flash
|
|
|
|
The bitaxetool includes all necessary library for flashing the binary file to the Bitaxe Hardware.
|
|
|
|
The bitaxetool requires a config.cvs preloaded file and the appropiate firmware.bin file in it's executed directory.
|
|
|
|
3. Flash with the bitaxetool
|
|
|
|
```
|
|
bitaxetool --config ./config.cvs --firmware ./esp-miner-factory-v2.0.3.bin
|
|
```
|
|
|
|
## API
|
|
Bitaxe provides an API to expose actions and information.
|
|
|
|
For more details take a look at `main/http_server/http_server.c`.
|
|
|
|
Things that can be done are:
|
|
|
|
- Get System Info
|
|
- Get Swarm Info
|
|
- Update Swarm
|
|
- Swarm Options
|
|
- System Restart Action
|
|
- Update System Settings Action
|
|
- System Options
|
|
- Update OTA Firmware
|
|
- Update OTA WWW
|
|
- WebSocket
|
|
|
|
Some API examples in curl:
|
|
```bash
|
|
# Get system information
|
|
curl http://YOUR-BITAXE-IP/api/system/info
|
|
```
|
|
```bash
|
|
# Get swarm information
|
|
curl http://YOUR-BITAXE-IP/api/swarm/info
|
|
```
|
|
```bash
|
|
# System restart action
|
|
curl -X POST http://YOUR-BITAXE-IP/api/system/restart
|
|
```
|