Skot
4411509217
added BM1368 3D model from Nine9Seven
2024-05-08 10:16:04 -04:00
Skot
9951920b40
added better 3D file for L1. Generated & checked Gerbers
2024-05-02 20:17:31 -04:00
Skot
31288d4ac8
placed all the silkscreen, finished routing, DRC is looking pretty good
2024-05-01 16:21:52 -04:00
Skot
e31972d336
changed barrel plug to 54-00164 for #158
2024-04-25 19:45:53 -04:00
Skot
b9c48b8243
changed up the TPS546D24A. Added Inductor part
2024-04-25 17:37:06 -04:00
Skot
b9715af080
futzed around with barrel layout. added barrel 3D model
2024-01-17 00:22:08 -05:00
Skot Croshere
22f5b3ffcf
- added fix for #96 and #97
...
- beefed up vias for new SMD barrel connector
- added PWR_EN pullup
- added PLUG_SENSE signal to GPIO12
- Regenerated BOM
- Added gerbers
- Added missing 3D files
2023-11-19 23:47:41 -05:00
Skot Croshere
538dba1df8
added sweet button 3d model!
2023-10-23 21:24:48 -04:00
Skot Croshere
ffb6ea4a9a
switched PWR_EN to GPIO10. Added 3D file for the oscillator.
2023-10-19 13:07:25 -04:00
Skot Croshere
b81fe82b2d
added some (poor) 3D models for the buttons
2023-10-19 11:33:34 -04:00
Skot Croshere
07a56ead67
moved R4 back to it's original position so I can avoid a new stencil. added OLED 3D model.
2023-10-19 11:01:05 -04:00
Ben
429f07fd12
Changed barrel plug to 2 pin, added JST-XH connector
2023-10-01 18:07:44 -04:00
Skot Croshere
0950fcef7b
fixed up USB-C wiring. added CC pulldown resistors. added LCD display to play with
2023-09-11 00:54:03 -04:00
Ben
de1e96504e
added barrel jack and heatsink 3d file
2023-09-05 23:03:42 -04:00
Skot Croshere
34d1d6daef
added USB port and EN/BOOT buttons. placed and routed
2023-07-11 00:01:52 -04:00
Skot Croshere
f621d4b4e9
switched to the standard 1.27mm pitch 10pin JTAG header
2023-01-30 00:21:30 -05:00
Skot Croshere
e3614acec8
updated the fan connector for #21
2023-01-26 23:53:25 -05:00
Skot Croshere
b746e052af
added 32kHz crystal for #23
2023-01-26 22:45:13 -05:00
Skot Croshere
87e039529f
cleaned up silkscreen. added some screenshots
2022-11-30 19:18:34 -05:00
Skot Croshere
1c3ef62378
lots of signals routed. much better ESP32-S3 3D model
2022-11-30 17:40:28 -05:00
Skot Croshere
5d9cf51b8b
added status LEDs, GPIOs, and a bigger 3V3 LDO
2022-11-28 10:28:48 -05:00
Skot Croshere
47ad4ac3f9
added SN74AXC1T45 for the ESP32 clocking the BM1397 idea.
2022-11-27 13:01:52 -05:00
Skot Croshere
8d23cc95d2
added almost all of the feedback from NebulaMiner
2022-11-25 19:44:24 -05:00
Skot Croshere
e071c59ccd
schematic done, all footprints added, 3D files added. Rough placement done. needs lots of routing.
2022-11-22 22:05:40 -05:00
Skot Croshere
8e8cad1e39
switched out some OOS parts, generated BOM
2022-10-04 16:17:22 -04:00
Skot Croshere
58234a93b3
added an ESP32-C3 to try out. Added a NCT218
2022-06-24 15:54:35 -07:00
Skot Croshere
76889a29f8
made separate symbols for BM1397 in mode0 and mode1
2022-06-23 00:25:23 -07:00
Skot Croshere
01a8b31578
added VIN spade connectors for #6 . moved the 5V pinheader around the corner. fixed the part numbers on R19-R22. Switched to in-stock LDOs for IC4 and IC5
2022-06-10 18:10:28 -07:00
Skot Croshere
585726158b
routed the bitaxe!
2022-03-04 22:17:39 -08:00