fa60afc4fb957875bab1c8982d9d9e4999a3814c wallet: Add BlockUntilSyncedToCurrentChain to dumpwallet (MarcoFalke)
Pull request description:
dumpwallet includes the block hash in the output, so this method depends on the chainstate. According to the developer notes e84a5f0004/doc/developer-notes.md (L1095) it must include a `BlockUntilSyncedToCurrentChain`.
This is a minor fix and does not need backport, I think.
It fixes test failures such as https://travis-ci.org/github/bitcoin/bitcoin/jobs/675487097#L2657 , which can only happen in master because the test was not backported.
ACKs for top commit:
promag:
Code review ACK fa60afc4fb957875bab1c8982d9d9e4999a3814c.
ryanofsky:
Code review ACK fa60afc4fb957875bab1c8982d9d9e4999a3814c
meshcollider:
utACK fa60afc4fb957875bab1c8982d9d9e4999a3814c
Tree-SHA512: 8df70b06b226b2cdf880dec9264adb72d66fd81b09b404fd1665a79e5f5236d26122eebf15df00fe71ee292b5c91b2dc23a0a42b2aa50a8d690604b23832723f
fa1fdb02fccd0f670f7b08ee61c249f04d0db17f bench: Replace ::mempool globabl with test_setup.mempool (MarcoFalke)
fab117096446ab63d1f38c1ef6edbc94a5d4ab52 bench: Remove requirement that all benches use RegTestingSetup (MarcoFalke)
Pull request description:
The benches have always set up one global testing setup. This makes it hard to pick no testing setup at all or one with different params.
Fix this by removing any global state setup from the main `bench.cpp` and leave the setup to each individual bench.
One reason to have one global testing setup is to set the datadir location to a tempdir to avoid reading or writing in the default datadir location. But #13687 should prevent this already.
Top commit has no ACKs.
Tree-SHA512: 7c98aea7725a20f4b9225221f4279b9e9f7257ed5c14712ad01ea80d87c3b0fed760b40f413892498bbb354a917ee02d4c575cbe8423a403b86755e8ee11f33b
850847309458f43fc7ce6c13fa08c86e1cae042a Avoid non-trivial global constants in SHA-NI code (Pieter Wuille)
Pull request description:
This is a potential solution for #18456.
It seems that the compiler cannot turn `_mm_set_epi64x(<constant>,<constnant>)` into a constant itself, and thus emits a global initializer for the `MASK`, `INIT0`, and `INIT1` global constants in the sha-ni SHA256 implementation.
Change this by turning them into dumb byte arrays, loading them into an SSE variable whenever needed.
Tested on a SHA-NI capable machine. I do not observe any obvious performance impact (but this is hard to measure, it's already very fast...).
ACKs for top commit:
laanwj:
Code review ACK 850847309458f43fc7ce6c13fa08c86e1cae042a
elichai:
ACK 850847309458f43fc7ce6c13fa08c86e1cae042a
Tree-SHA512: 07049cf1a33624c22df2be48b814d5636c037b368861eb13ee073bdce2b7c902a56e96518218961f55a2a1631a40825ded6dbbc28d7fe0e7fec267d704e39112
21fa0a44abe8c1b5c452e097eab20cf0ae988805 [docs] use consistent naming for possible_overwrite (John Newbery)
2685c214cce4b07695273503e60350e3f05fe3e2 [tests] small whitespace fixup (John Newbery)
e9936966c08bd8a6ac02828131f619ddaa1ced13 scripted-diff: Rename PRUNED to SPENT in coins tests (John Newbery)
c205979031ff4e8e32a5f05bae813405f233fccd [docs] Improve commenting in coins.cpp|h (John Newbery)
Pull request description:
- Add full commenting for spentness / DIRTYness / FRESHness and which combinations are valid
- Remove the 'pruned' terminology, which doesn't make sense since per-txout chainstate db was merged (#10195).
- Rename `potential_overwrite` to `possible_overwrite` to standardize terminology (there were previously examples of both, which made searching the codebase difficult).
- Make other minor improvements to the comments
ACKs for top commit:
jonatack:
Re-ACK 21fa0a4 per `git diff 98bee55 21fa0a4` the only change since my previous review is the following code commenting diff in `src/coins.cpp::L177-179`; rebuilt/ran unit tests anyway as a sanity check on the unit test changes.
Tree-SHA512: 391e01588ef5edb417250080cec17361f982c4454bc5f8c6d78bbd528c68a2bb94373297760691295c24660ce1022ad3ef7599762f736c8eed772ce096d38c3d
b91e4ae0d8ab2ae6b77585c97c52d825f56ed539 Do not expose and consider -logthreadnames when it does not work (Hennadii Stepanov)
Pull request description:
There are conditions when the `HAVE_THREAD_LOCAL` macro is undefined what causes the `-logthreadnames` option does not work -- instead of thread names empty strings `[]` only are printed in the `debug.log` file.
This PR does not exposes the `-logthreadnames` option in such cases.
Refs:
- #16059
- #18652
ACKs for top commit:
MarcoFalke:
ACK b91e4ae0d8ab2ae6b77585c97c52d825f56ed539, looked at the diff, didn't test
Tree-SHA512: 3bd58e5ea603c69686589ddc94d6fa441cab4f712004378f2f1661e12638804ca03cfb6426e6393e55b6a095b325f3161d3c5371af05d7fc79d6d328227bf40c
ccccd5190898ece3ac17aa3178f320d091f221df script: Remove undocumented and unused operator+ (MarcoFalke)
Pull request description:
This operator has no documented use case and is also unused outside of test code. The test code and all other (imaginary) code that might use this operator is written more clear and concise by the existing CScript push operators for opcodes and data.
Removing the operator is also going to protect against accidentally reintroducing bugs like this 6ff5f718b6 (diff-8458adcedc17d046942185cb709ff5c3L1135) (last time it was used).
ACKs for top commit:
laanwj:
ACK ccccd5190898ece3ac17aa3178f320d091f221df
Tree-SHA512: 43898ac77e4d9643d9f8ac6f8f65497a4f0bbb1fb5dcaecc839c3719aa36181ba77befb213e59a9f33a20a29e0173a0e9c4763b1930940b32c3d1598b3e39af9
a1d5b12ec07d2f7aa9fa955a6dd99e8a2be5cb25 Merge getreceivedby tally into GetReceived function (Andrew Toth)
Pull request description:
This PR merges the tally code of `getreceivedbyaddress` and `getreceivedbylabel` into a single function `GetReceived`. This reduces repeated code and makes it similar to `listreceivedbyaddress` and `listreceivedbylabel`, which use the function `ListReceived`. It will also make the change in #14707 simpler and easier to review.
ACKs for top commit:
theStack:
re-ACK a1d5b12ec0
meshcollider:
utACK a1d5b12ec07d2f7aa9fa955a6dd99e8a2be5cb25
Tree-SHA512: 43d9cd92f7c2c6a8b9c7509aa85a9b9233a6cfec1c43a9062e3bdfb83515413d1feafa8938c828351278ba22bd31c47e62ab5341e4bddc2493103b094d73b047
709998467e1c1bc7980662c9f88fbc7964602d33 rpc: doc: Fix and extend getblockstats examples (Adam Soltys)
Pull request description:
This pull fixes the example curl command for `getblockstats` which doesn't work as is because it's missing a comma between the params and has single quotes around the second parameter.
It also adds an additional example of getting block stats by hash by using a known workaround (#15412) to get bitcoin-cli to treat the hash parameter as JSON instead of a string since there is ongoing deliberation about how or whether to fix the root issue (#15448).
ACKs for top commit:
theStack:
ACK 709998467e
Tree-SHA512: 84a5b7f449f06fff785bc0afbc1a7dfd55454bc76c52a8945e91556f87f3edfdc5a1780faab8fcfd6c415b734295b7c67d2e04ba7b6cfa91a77758af5dda53ae
a9ecbdfcaa15499644d16e9c8ad2c63dfc45b37b test: add more inactive filter tests to p2p_filter.py (Sebastian Falbesoner)
5eae034996b340c19cebab9efb6c89d20fe051ef net: limit BIP37 filter lifespan (active between 'filterload' and 'filterclear') (Sebastian Falbesoner)
Pull request description:
This PR fixes https://github.com/bitcoin/bitcoin/issues/18483. On the master branch, there is currently _always_ a BIP37 filter set for every peer: if not a specific filter is set through a `filterload` message, a default match-everything filter is instanciated and pointed to via the `CBloomFilter` default constructor; that happens both initially, when the containing structure `TxRelay` is constructed:
c0b389b335/src/net.h (L812)
and after a loaded filter is removed again through a `filterclear` message:
c0b389b335/src/net_processing.cpp (L3201)
The behaviour was introduced by commit 37c6389c5a (an intentional covert fix for [CVE-2013-5700](https://github.com/bitcoin/bitcoin/pull/18515), according to gmaxwell).
This default match-everything filter leads to some unintended side-effects:
1. `getdata` request for filtered blocks (i.e. type `MSG_FILTERED_BLOCK`) are always responded to with `merkleblock`s, even if no filter was set by the peer, see issue #18483 (strictly speaking, this is a violation of BIP37) c0b389b335/src/net_processing.cpp (L1504-L1507)
2. if a peer sends a `filteradd` message without having loaded a filter via `filterload` before, the intended increasing of the banscore never happens (triggered if `bad` is set to true, a few lines below) c0b389b335/src/net_processing.cpp (L3182-L3186)
This PR basically activates the `else`-branch code paths for all checks of `pfilter` again (on the master branch, they are dead code) by limiting the pointer's lifespan: instead of always having a filter set, the `pfilter` is only pointing to a `CBloomFilter`-instance after receiving a `filterload` message and the instance is destroyed again (and the pointer nullified) after receiving a `filterclear` message.
Here is a before/after comparison in behaviour:
| code part / scenario | master branch | PR branch |
| --------------------------------------------- | ---------------------------------- | ---------------------------------------------------- |
| `getdata` processing for `MSG_FILTERED_BLOCK` | always responds with `merkleblock` | only responds if filter was set via `filterload` |
| `filteradd` processing, no filter was loaded | nothing | peer's banscore increases by 100 (i.e. disconnect) |
On the other code parts where `pfilter` is checked there is no change in the logic behaviour (except that `CBloomFilter::IsRelevantAndUpdate()` is unnecessarily called and immediately returned in the master branch).
Note that the default constructor of `CBloomFilter` is only used for deserializing the received `filterload` message and nowhere else. The PR also contains a functional test checking that sending `getdata` for filtered blocks is ignored by the node if no bloom filter is set.
ACKs for top commit:
MarcoFalke:
re-ACK a9ecbdfcaa, only change is in test code 🕙
Tree-SHA512: 1a656a6d74ccaf628e7fdca063ba63fbab2089e0b6d0a11be9bbd387c2ee6d3230706ff8ffc1a55711481df3d4547137dd7c9d9184d89eaa43ade4927792d0b6
0d32d661481f099af572e7a08a50e17bcc165c44 Remove -upgradewallet startup option (Andrew Chow)
92263cce5b6c6b66296dadda5f29724611db0160 Add upgradewallet RPC (Andrew Chow)
1e48796c99b63aa8fa8451ce7b0c20759ea43500 Make UpgradeWallet a member function of CWallet (Andrew Chow)
c988f27937bc79c90f4eed48552c72f1b66dc044 Have UpgradeWallet take the version to upgrade to and an error message out parameter (Andrew Chow)
183323712398e26ddcf3a9dc048aaa9900a91f5a Only run UpgradeWallet if the wallet needs to be upgraded (Andrew Chow)
9c16b1735f8e530ce68d678e9ca0eceb2ceb3520 Move wallet upgrading to its own function (Andrew Chow)
Pull request description:
`-upgradewallet` is largely incompatible with many recent wallet features and versions. For example, it was disabled if multiple wallets were used and would not work with encrypted wallets that were being upgraded to HD.
This PR does away with the old method of upgrading upon startup and instead allows users to upgrade their wallets via an `upgradewallet` RPC. This does largely the same thing as the old `-upgradewallet` option but because the wallet is loaded, it can be unlocked to upgrade to HD. Furthermore it is compatible with multiwallet as it works on the individual wallet that is specified by the RPC.
ACKs for top commit:
meshcollider:
Code review ACK 0d32d661481f099af572e7a08a50e17bcc165c44
darosior:
ACK 0d32d661481f099af572e7a08a50e17bcc165c44
MarcoFalke:
ACK 0d32d661481f099af572e7a08a50e17bcc165c44 🚵
Tree-SHA512: b425bf6f5d605e26506889d63c780895482f07cbc086193218e031e8504d3072d41e90d65cd41bcc98ee4c1eb048954bc5d4ac85435f7394892373aac89a3b0a
3718ae2ef8dd2559e435bf8d7f5ed5217611ce81 [tests] Don't initialize PrecomputedTransactionData in txvalidationcache tests (John Newbery)
Pull request description:
PrecomputedTransactionData is initialized inside CheckInputScripts(). No need to pre-initialize it before calling into CheckInputScripts().
Normally, I wouldn't bother, but we're making changes to `PrecomputedTransactionData` in #17977 which would break these tests without removing these constructions. Might as well get these changes out of the way here.
ACKs for top commit:
robot-visions:
ACK 3718ae2ef8dd2559e435bf8d7f5ed5217611ce81
sipa:
utACK 3718ae2ef8dd2559e435bf8d7f5ed5217611ce81
Tree-SHA512: bc9c095035a7072a2a91941df38cdbb969e817264efbaa6dcb88cc3ab132d9264aa0751fa588d1a5e45f37b4d2bb1903cda078765f0bbcc87d9cc47cbec5356a
27abd1a4f4c7a3d092d59edbbaa1e0f324c8b0ef test: Replace boost::mutex with std::mutex (Hennadii Stepanov)
Pull request description:
This PR replaces `boost::mutex` with `std::mutex` in the `scheduler_tests` test suite.
ACKs for top commit:
theStack:
ACK 27abd1a4f4
sipa:
utACK 27abd1a4f4c7a3d092d59edbbaa1e0f324c8b0ef
Tree-SHA512: 062eed360a68910fb71552fd892bfd097442718a237446cfb8350bfd5d807da7251ead2b9755e1d7022598774ed23fa5432a589ac6f8cadddab404b439883466
ASLR is not currently working for the bitcoin-cli.exe binary. This is
due to it not having a .reloc section, which is stripped by default by
the mingw-w64 ld we use for gitian builds. A good summary of issues with
ld and mingw-w64 is available in this thread:
https://sourceware.org/bugzilla/show_bug.cgi?id=19011.
All other Windows binaries that we distribute (bitcoind, bitcoin-qt,
bitcoin-wallet, bitcoin-tx and test_bitcoin) do not suffer this issue,
and currently having working ASLR. This is due to them exporting
(inadvertent or not) libsecp256k1 symbols, and, as a result, the .reloc
section is not stripped by ld.
This change is a temporary workaround, also the same one described here:
https://www.kb.cert.org/vuls/id/307144/, that causes main() to be
exported. Exporting a symbol will mean that the .reloc section is not
stripped, and ASLR will function correctly.
92bcd70808b9cac56b184903aa6d37baf9641b37 [wallet] allow transaction without change if keypool is empty (Sjors Provoost)
709f8685ac37510aa145ac259753583c82280038 [wallet] CreateTransaction: simplify change address check (Sjors Provoost)
5efc25f9638866941028454cfa9bae27f1519cb4 [wallet] translate "Keypool ran out" message (Sjors Provoost)
Pull request description:
Extracted from #16944
First this PR simplifies the check when generating a change address, by dropping `CanGetAddresses` and just letting `reservedest.GetReservedDestination` do this check.
Second, when the keypool is empty, instead of immediately giving up, we create a dummy change address and pass that to coin selection. If we didn't need the change address (e.g. when spending the entire balance), then it's all good. If we did need a change address, we throw the original error.
ACKs for top commit:
fjahr:
Code review ACK 92bcd70808b9cac56b184903aa6d37baf9641b37
jonasschnelli:
utACK 92bcd70808b9cac56b184903aa6d37baf9641b37
achow101:
ACK 92bcd70808b9cac56b184903aa6d37baf9641b37
meshcollider:
Code review ACK 92bcd70808b9cac56b184903aa6d37baf9641b37
Tree-SHA512: 07b8c8251f57061c58a85ebf0359be63583c23bac7a2c4cefdc14820c0cdebcc90a2bb218e5ede0db11d1e204cda149e056dfd18614642070b3d56efe2735006
This fixes the example curl command for `getblockstats` which is missing
a comma between the params and has single quotes around the second
parameter.
Besides fixing the existing example, this commit adds an additional
example of getting block stats by hash by using a known workaround with
bitcoin-cli to get it to treat the hash parameter as a JSON string by
wrapping it in both single and double quotes.
Co-Authored-By: Andrew Toth <andrewstoth@gmail.com>
Co-Authored-By: Sebastian Falbesoner <sebastian.falbesoner@gmail.com>
6f8b498d186df5aa08dbb9ca8fdeab6652f1db5e fuzz: http_request workaround for libevent < 2.1.1 (Sebastian Falbesoner)
Pull request description:
The fuzz test `http_request` calls the following two internal libevent functions:
* `evhttp_parse_firstline_`
* `evhttp_parse_headers_`
Before libevent 2.1.1 however, internal functions names didn't end with an underscore (see libevent commit 8ac3c4c25b and [Changelog for 2.1.1.-alpha](https://github.com/libevent/libevent/blob/master/ChangeLog#L1830) when the change was first mentioned) hence the build fails with a linking error.
This PR adds a preprocessor workaround to the test that checks for the libevent version (via ~`_EVENT_NUMERIC_VERSION`~ `LIBEVENT_VERSION_NUMBER`) and creates wrapper functions mapping to naming scheme without underscore in case the version is older than 2.1.1.
Tested with Ubuntu Xenial 16.04.6 LTS and clang-8.
ACKs for top commit:
hebasto:
ACK 6f8b498d186df5aa08dbb9ca8fdeab6652f1db5e, tested on xenial:
Tree-SHA512: 3b9e0147b8aea22e417d418e3b6d4905f5be131c2b0ae4b0f8b9411c5606d2e22f1b23e1ecc6980ecab907c61404de09e588aae1ac43cf70cf9e8d006bbdee73
fa168d754221a83cab0d2984a02c41cf6819e873 rpc: Document all aliases for first arg of listtransactions (MarcoFalke)
fa5b1f067fcf8bebb23455dd8a16cde5068e79cd rpc: Document all aliases for second arg of getblock (MarcoFalke)
fa86a4bbfc000593ae4ad9dcdaec3fd0c0406086 rpc: Rename first arg of generateblock RPC to "output" (MarcoFalke)
Pull request description:
This fixes a bug found with #18531:
* Currently the named argument for `generateblock` is documented as `address/descriptor`, but the server only accepts a named argument of `address`. Fix it by changing the name to `output` for both the documentation and the server code. Also, add tests to prove the server understands the new name `output`.
* Unrelated to that, there have been a bunch of aliases in the server code that are not present in the source code of the documentation. Fix that by adding the alias to the source code of the documentation. Only the first alias is displayed in the rendered documentation. Also, add tests to prove the server actually understands all aliases.
ACKs for top commit:
pierreN:
Tested ACK fa168d7 tests, help messages
Tree-SHA512: 05e15628e3a667b296f3783d20f764b450b959451b5360c7eaf5993156582d47a0f5882330ca2493b851eb46324d504953b90c875bc88a15c9e8c89eb3ef8d92
fa4632c41714dfaa699bacc6a947d72668a4deef test: Move boost/stdlib includes last (MarcoFalke)
fa488f131fd4f5bab0d01376c5a5013306f1abcd scripted-diff: Bump copyright headers (MarcoFalke)
fac5c373006a9e4bcbb56843bb85f1aca4d87599 scripted-diff: Sort test includes (MarcoFalke)
Pull request description:
When writing tests, often includes need to be added or removed. Currently the list of includes is not sorted, so developers that write tests and have `clang-format` installed will either have an unrelated change (sorting) included in their commit or they will have to manually undo the sort.
This pull preempts both issues by just sorting all includes in one commit.
Please be aware that this is **NOT** a change to policy to enforce clang-format or any other developer guideline or process. Developers are free to use whatever tool they want, see also #18651.
Edit: Also includes a commit to bump the copyright headers, so that the touched files don't need to be touched again for that.
ACKs for top commit:
practicalswift:
ACK fa4632c41714dfaa699bacc6a947d72668a4deef
jonatack:
ACK fa4632c41714dfaa, light review and sanity checks with gcc build and clang fuzz build
Tree-SHA512: 130a8d073a379ba556b1e64104d37c46b671425c0aef0ed725fd60156a95e8dc83fb6f0b5330b2f8152cf5daaf3983b4aca5e75812598f2626c39fd12b88b180
38677274f931088218eeb1f258077d3387f39c89 rpc: settxfee respects -maxtxfee wallet setting (Fabian Jahr)
bda84a08a0ac92dff6cadc99cf9bb8c3fadd7e13 rpc: Add documentation for deactivating settxfee (Fabian Jahr)
Pull request description:
~~Closes 18315~~
`settxfee` can be deactivated by passing 0 as the fee. That does not seem to be documented for the user so this PR adds it in the description. The return value of a simple boolean seems also too simplified given the multiple dimensions that this deactivation feature enables. I.e. it does not seem intuitive if the returned boolean shows that the call succeeded or if means that `settxfee` is active. My suggested solution is to change the return value to a JSON object that included the "active" state and the currently set fee rate.
Examples:
```
$ src/bitcoin-cli settxfee 0.0000000
{
"active": false,
"fee_rate": "0.00000000 BTC/kB"
}
$ src/bitcoin-cli settxfee 0.0001
{
"active": true,
"fee_rate": "0.00010000 BTC/kB"
}
```
ACKs for top commit:
MarcoFalke:
ACK 38677274f931088218eeb1f258077d3387f39c89, seems useful to error out early instead of later #16257🕍
jonatack:
ACK 38677274f931088218eeb
meshcollider:
LGTM, utACK 38677274f931088218eeb1f258077d3387f39c89
Tree-SHA512: 642813b5cf6612abb4b6cb63728081a6bd1659d809e0149c8f56060b6da7253fee989b3b202854f3051df3773c966799af30b612648c466b099f00590f356548
a2324e4d3f47f084b07a364c9a360a0bf31e86a0 test: Improve naming and logging of avoid_reuse tests (Fabian Jahr)
1abbdac6777bc5396d17a6772c8176a354730997 wallet: Prefer full destination groups in coin selection (Fabian Jahr)
Pull request description:
Fixes#17603 (together with #17843)
In the case of destination groups of >10 outputs existing in a wallet with `avoid_reuse` enabled, the grouping algorithm is adding left-over outputs as an "incomplete" group to the list of groups even when a full group has already been added. This leads to the strange behavior that if there are >10 outputs for a destination the transaction spending from that will effectively use `len(outputs) % 10` as inputs for that transaction.
From the original PR and the code comment I understand the correct behavior should be the usage of 10 outputs. I opted for minimal changes in the current code although there maybe optimizations possible for cases with >20 outputs on a destination this sounds like too much of an edge case right now.
ACKs for top commit:
jonatack:
Re-ACK a2324e4
achow101:
ACK a2324e4d3f47f084b07a364c9a360a0bf31e86a0
kallewoof:
ACK a2324e4d3f47f084b07a364c9a360a0bf31e86a0
meshcollider:
Tested ACK a2324e4d3f47f084b07a364c9a360a0bf31e86a0 (verified the new test fails on master without this change)
Tree-SHA512: 4743779c5d469fcd16df5baf166024b1d3c8eaca151df1e8281b71df62b29541cf7bfee3f8ab48d83e3b34c9256e53fd38a7b146a54c79f9caa44cce3636971a
69ffddc83e0f3e265bf6cf7ae31489ae629fe6be refactor: Remove unused methods CBloomFilter::reset()/clear() (Sebastian Falbesoner)
Pull request description:
The method `CBloomFilter::reset()` was introduced by commit d2d7ee0e863b286e1c9f9c54659d494fb0a7712d in 2015, but was never ever used, as far as I could find. As discovered by MarcoFalke, the method `clear()` is also unused outside of unit tests and is hence also removed.
ACKs for top commit:
MarcoFalke:
re-ACK 69ffddc83e0f3e265bf6cf7ae31489ae629fe6be
jonatack:
ACK 69ffddc83e0f3e2, code review, compiled a fuzz build and started the bloom_filter fuzz test as a sanity check.
promag:
ACK 69ffddc83e0f3e265bf6cf7ae31489ae629fe6be.
Tree-SHA512: 6c53678545ad8e2fa1ffc0a8838e450462f26748a60632f738dc020f0eb494ae2c32841e6256e266ed9140177257a78b707123421942f3819a14ffcb9a99322f
9b5950db8683f9b4be03f79ee0aae8a780b01a4b bnb: exit selection when best_waste is 0 (Andrew Chow)
Pull request description:
If we find a solution which has no waste, just use that. This solution
is what we would consider to be optimal, and other solutions we find
would have to also have 0 waste, so they are equivalent to the first
one with 0 waste. Thus we can optimize by just choosing the first one
with 0 waste.
Closes#18257
ACKs for top commit:
instagibbs:
utACK 9b5950db86
meshcollider:
utACK 9b5950db8683f9b4be03f79ee0aae8a780b01a4b
Tree-SHA512: 59565ff4a3d8281e7bc0ce87065a34c8d8bf8a95f628ba96b4fe89f1274979165aea6312e5f1f21b418c8c484aafc5166d22d9eff9d127a8192498625d58c557
faf989f93695d29099f6e152d5a2e117cd304183 util: Document why ArgsManager (con/de)structor is not inline (MarcoFalke)
fae00a77e2589cc784650e3e60e1b99c22ca8a7b bench: Remove unused argsman.ClearArgs (MarcoFalke)
fa46aebeb1fc419b227524eab8352d9a7fc1f981 scripted-diff: Replace gArgs with local argsman in bench (MarcoFalke)
fa2bc4141df59f2e38fef863723b433250295d20 tools: Add unused argsman to bench_bitcoin (MarcoFalke)
Pull request description:
All utilities use the same gArgs global that the node uses. This is generally fine and does not lead to issues unless a bench test is going to spin up a NodeContext via the TestingSetup. In that case the two uses of gArgs conflict and currently it needs to be cleared:
544709763e/src/bench/bench_bitcoin.cpp (L76)
One solution would be to do nothing, because the current code works with that workaround. Another solution would be to not use the same global in all binaries.
ACKs for top commit:
promag:
ACK faf989f93695d29099f6e152d5a2e117cd304183.
ryanofsky:
Code review ACK faf989f93695d29099f6e152d5a2e117cd304183. Just new commit added restoring forward declaration
Tree-SHA512: 8ee4b28eee294d41c002f801fa844b0c23c919a3061f5109638701db0947b3b0ea28caa7311ae5f126fc660648bbaa0890853e6b06bdc5868692f52ba8c05f66
bee88b8c5887e6beb75f26f0db97888a48fa7e7c tests: have coins simulation test also use CCoinsViewDB (James O'Beirne)
Pull request description:
Before this change, the coins simulation test uses a base view of type
CCoinsViewTest, which has no relevance outside of the unittest suite. Might as
well reuse this testcase with a more realistic configuration that has
CCoinsViewDB (i.e. in-memory leveldb) at the bottom of the view structure.
This adds explicit use of CCoinsViewDB in the unittest suite.
#### Before change
```
./src/test/test_bitcoin --run_test=coins_tests --catch_system_errors=no 21.99s user 0.04s system 99% cpu 22.057 total
```
#### After change
```
./src/test/test_bitcoin --run_test=coins_tests --catch_system_errors=no 78.80s user 0.04s system 100% cpu 1:18.82 total
```
ACKs for top commit:
ryanofsky:
Code review ACK bee88b8c5887e6beb75f26f0db97888a48fa7e7c
Tree-SHA512: 75296b2bcbae2f46e780489aafb032592544a15c384d569d016005692fe79fe60d7f05857cf25cc7b0f9ab1c53b47886a6c71cca074a03fb9afec30e1f376858
a95af77eb264646b4160836e4e9a2c4b45f87bb8 qt: Make bitcoin.ico non-executable (practicalswift)
Pull request description:
Make `bitcoin.ico` non-executable.
No need to execute icons and having +x bits laying around breaks `find … -executable` :)
Before this patch:
```sh
$ find $(git ls-files -- ":(exclude)*.sh" ":(exclude)*.py") -executable
ci/retry/retry
contrib/macdeploy/macdeployqtplus
depends/config.guess
depends/config.sub
src/qt/res/icons/bitcoin.ico
src/secp256k1/src/modules/recovery/main_impl.h
```
After this patch:
```sh
$ find $(git ls-files -- ":(exclude)*.sh" ":(exclude)*.py") -executable
ci/retry/retry
contrib/macdeploy/macdeployqtplus
depends/config.guess
depends/config.sub
src/secp256k1/src/modules/recovery/main_impl.h
```
FWIW:
```
$ file $(find $(git ls-files -- ":(exclude)*.sh" ":(exclude)*.py") -executable)
ci/retry/retry: Bourne-Again shell script, UTF-8 Unicode text executable
contrib/macdeploy/macdeployqtplus: Python script, ASCII text executable
depends/config.guess: POSIX shell script, ASCII text executable
depends/config.sub: POSIX shell script, ASCII text executable
src/qt/res/icons/bitcoin.ico: MS Windows icon resource - 10 icons, 48x48, 16 colors, 4 bits/pixel, 32x32, 16 colors, 4 bits/pixel
src/secp256k1/src/modules/recovery/main_impl.h: C source, ASCII text
```
ACKs for top commit:
MarcoFalke:
ACK a95af77eb264646b4160836e4e9a2c4b45f87bb8 gitian build finished, so it doesn't look like the icon used in Windows resource files needs to be executable. Though, I didn't read the documentation.
jonatack:
ACK a95af77eb264646
Tree-SHA512: ecf9154077824ae4c274b4341e985797f3648c0cb0c31cb25ce382163b923a3acbc7048683720be4ae3663501801129cd0f48c441a36f049cc304ebe9f30994e
