Instead of storing and passing around fixed strings for the purpose of
an address, use an enum.
This also rationalizes the CAddressBookData struct, documenting all fields and
making them public, and simplifying the representation to avoid bugs like
https://github.com/bitcoin/bitcoin/pull/26761#discussion_r1134615114 and make
it not possible to invalid address data like change addresses with labels.
Co-authored-by: Ryan Ofsky <ryan@ofsky.org>
The fs.* files are already part of the libbitcoin_util library. With the
introduction of the fs_helpers.* it makes sense to move fs.* into the
util/ directory as well.
bc886fcb31e1afa7bbf7b86bfd93e51da7076ccf Change mapWallet to be a std::unordered_map (Andrew Chow)
272356024db978c92112167f8d8e4cc62adad63d Change getWalletTxs to return a set instead of a vector (Andrew Chow)
97532867cf51db3e941231fbdc60f9f4fa0012a0 Change mapTxSpends to be a std::unordered_multimap (Andrew Chow)
1f798fe85ba952273005f68e36ed48cfc36f4c9d wallet: Cache SigningProviders (Andrew Chow)
8a105ecd1aeff15f84c3883e2762bf71ad59d920 wallet: Use CalculateMaximumSignedInputSize to indicate solvability (Andrew Chow)
Pull request description:
While running my coin selection simulations, I noticed that towards the end of the simulation, the wallet would become slow to make new transactions. The wallet generally performs much more slowly when there are a large number of transactions and/or a large number of keys. The improvements here are focused on wallets with a large number of transactions as that is what the simulations produce.
Most of the slowdown I observed was due to `DescriptorScriptPubKeyMan::GetSigningProvider` re-deriving keys every time it is called. To avoid this, it will now cache the `SigningProvider` produced so that repeatedly fetching the `SigningProvider` for the same script will not result in the same key being derived over and over. This has a side effect of making the function non-const, which makes a lot of other functions non-const as well. This helps with wallets with lots of address reuse (as my coin selection simulations are), but not if addresses are not reused as keys will end up needing to be derived the first time `GetSigningProvider` is called for a script.
The `GetSigningProvider` problem was also exacerbated by unnecessarily fetching a `SigningProvider` for the same script multiple times. A `SigningProvider` is retrieved to be used inside of `IsSolvable`. A few lines later, we use `GetTxSpendSize` which fetches a `SigningProvider` and then calls `CalculateMaximumSignedInputSize`. We can avoid a second call to `GetSigningProvider` by using `CalculateMaximumSignedInputSize` directly with the `SigningProvider` already retrieved for `IsSolvable`.
There is an additional slowdown where `ProduceSignature` with a dummy signer is called twice for each output. The first time is `IsSolvable` checks that `ProduceSignature` succeeds, thereby informing whether we have solving data. The second is `CalculateMaximumSignedInputSize` which returns -1 if `ProduceSignature` fails, and returns the input size otherwise. We can reduce this to one call of `ProduceSignature` by using `CalculateMaximumSignedInputSize`'s result to set `solvable`.
Lastly, a lot of time is spent looking in `mapWallet` and `mapTxSpends` to determine whether an output is already spent. The performance of these lookups is slightly improved by changing those maps to use `std::unordered_map` and `std::unordered_multimap` respectively.
ACKs for top commit:
Xekyo:
ACK bc886fcb31e1afa7bbf7b86bfd93e51da7076ccf
furszy:
diff re-reACK bc886fcb
Tree-SHA512: fd710fe1224ef67d2bb83d6ac9e7428d9f76a67f14085915f9d80e1a492d2c51cb912edfcaad1db11c2edf8d2d97eb7ddd95bfb364587fb1f143490fd72c9ec1
For some reason, the primary consumer of getWalletTxs requires the
transactions to be in hash order when it is processing them. std::map
will iterate in hash order so the transactions end up in that order when
placed into the vector. To ensure this order when mapWallet is no longer
ordered, the vector is replaced with a set which will maintain the hash
order.
Rename `BResult` class to `util::Result` and update the class interface to be
more compatible with `std::optional` and with a full-featured result class
implemented in https://github.com/bitcoin/bitcoin/pull/25665. Motivation for
this change is to update existing `BResult` usages now so they don't have to
change later when more features are added in #25665.
This change makes the following improvements originally implemented in #25665:
- More explicit API. Drops potentially misleading `BResult` constructor that
treats any bilingual string argument as an error. Adds `util::Error`
constructor so it is never ambiguous when a result is being assigned an error
or non-error value.
- Better type compatibility. Supports `util::Result<bilingual_str>` return
values to hold translated messages which are not errors.
- More standard and consistent API. `util::Result` supports most of the same
operators and methods as `std::optional`. `BResult` had a less familiar
interface with `HasRes`/`GetObj`/`ReleaseObj` methods. The Result/Res/Obj
naming was also not internally consistent.
- Better code organization. Puts `src/util/` code in the `util::` namespace so
naming reflects code organization and it is obvious where the class is coming
from. Drops "B" from name because it is undocumented what it stands for
(bilingual?)
- Has unit tests.
e5b6aef61221b621ad77b5f075a16897e08835bf Move CBlockFileInfo::ToString method where class is declared (Russell Yanofsky)
f7086fd8ff084ab0dd656d75b7485e59263bdfd8 Add src/wallet/* code to wallet:: namespace (Russell Yanofsky)
90fc8b089d591cabff60ee829a33f96c37fd27ba Add src/node/* code to node:: namespace (Russell Yanofsky)
Pull request description:
There are no code changes, this is just adding `namespace` and `using` declarations and `node::` or `wallet::` qualifiers in some places.
Motivations for this change are:
- To make it easier to see when node and wallet code is being accessed places where it shouldn't be. For example if GUI code is accessing node and wallet internals or if wallet and node code are referencing each other.
- To make source code organization clearer ([#15732](https://github.com/bitcoin/bitcoin/issues/15732)), being able to know that `wallet::` code is in `src/wallet/`, `node::` code is in `src/node/`, `init::` code is in `src/init/`, `util::` code is in `src/util/`, etc.
Reviewing with `git log -p -n1 -U0 --word-diff-regex=.` can be helpful to verify this is only updating declarations, not changing code.
ACKs for top commit:
achow101:
ACK e5b6aef61221b621ad77b5f075a16897e08835bf
MarcoFalke:
Concept ACK e5b6aef61221b621ad77b5f075a16897e08835bf 🍨
Tree-SHA512: 3797745c90246794e2d55a2ee6e8b0ad5c811e4e03a242d3fdfeb68032f8787f0d48ed4097f6b7730f540220c0af99ef423cd9dbe7f76b2ec12e769a757a2c8d
`fs::path` looks more native than `std::string` for a parameter which
represents a backup file. This change eliminates back-and-forth type
conversions.
Name has been confusing since it was introduced, and it was pointed in
recent review club as https://bitcoincore.reviews/10102 that it was
particularly unclear how interfaces::WalletClient was different from
interfaces::Wallet.
-BEGIN VERIFY SCRIPT-
ren() { git grep -l "$1" src | xargs sed -i "s/$1/$2/g"; }
ren WalletClient WalletLoader
ren walletClient walletLoader
ren wallet_client wallet_loader
ren "wallet clients release the wallet" "wallet pointer owners release the wallet"
ren "wallet client" "wallet loader"
ren "Wallet client" "Wallet loader"
-END VERIFY SCRIPT-
Currently restorewallet() logic is written in the RPC layer
and it can´t be reused by GUI. So it reimplements this in the
wallet and interface sections and then, GUI can access it.
Move fillPSBT input-output argument before output-only arguments. This is a
temporary workaround which can go away with improvements to libmultiprocess
code generator. Currently code generator figures out order of input-output
parameters by looking at input list, but it would make more sense for it to
take order from output list, so input-only parameters still have to be first
but there is more flexibility for the other parameters.
1c4b456e1a0ccf0397d652f8c18201c3224c5c21 gui: send using external signer (Sjors Provoost)
24815c6309431cb0797defaf7add1150bcf4b567 gui: wallet creation detects external signer (Sjors Provoost)
3f845ea2994f53e29abeb3fa158c35f1ee56e7e8 node: add externalSigners to interface (Sjors Provoost)
62ac119f919ae1160ed67af796f24b78025fa8e3 gui: display address on external signer (Sjors Provoost)
450cb40a344605dda3bcc39495c35869580b9fc2 wallet: add displayAddress to interface (Sjors Provoost)
eef8d6452962cd4a8956d9ad268164715365b9ab gui: create wallet with external signer (Sjors Provoost)
6cdbc83e9341d1552faee4ccd8c190babc63e8d1 gui: add external signer path to options dialog (Sjors Provoost)
Pull request description:
Big picture overview in [this gist](https://gist.github.com/Sjors/29d06728c685e6182828c1ce9b74483d).
This PR adds GUI support for external signers, based on the since merged bitcoin/bitcoin#16546 (RPC).
The UX isn't amazing - especially the blocking calls - but it works.
First we adds a GUI setting for the signer script (e.g. path to HWI):
<img width="625" alt="Schermafbeelding 2019-08-05 om 19 32 59" src="https://user-images.githubusercontent.com/10217/62483415-e1ff1680-b7b7-11e9-97ca-8d2ce54ca1cb.png">
Then we add an external signer checkbox to the wallet creation dialog:
<img width="374" alt="Schermafbeelding 2019-11-07 om 19 17 23" src="https://user-images.githubusercontent.com/10217/68416387-b57ee000-0194-11ea-9730-127d60273008.png">
It's checked by default if HWI detects a device. It also grabs the name. It then creates a fresh wallet and imports the keys.
You can verify an address on the device (blocking...):
<img width="673" alt="Schermafbeelding 2019-08-05 om 19 29 22" src="https://user-images.githubusercontent.com/10217/62483560-43bf8080-b7b8-11e9-9902-8a036116dc4b.png">
Sending, including coin selection, Just Works(tm) as long the device is present.
~External signer support is enabled by default when the GUI is configured and Boost::Process is present.~
External signer support remains disabled by default, see https://github.com/bitcoin/bitcoin/pull/21935.
ACKs for top commit:
achow101:
Code Review ACK 1c4b456e1a0ccf0397d652f8c18201c3224c5c21
hebasto:
ACK 1c4b456e1a0ccf0397d652f8c18201c3224c5c21, tested on Linux Mint 20.1 (Qt 5.12.8) with HWW `2.0.2-rc.1`.
promag:
Tested ACK 1c4b456e1a0ccf0397d652f8c18201c3224c5c21 but rebased with e033ca1379, with HWI 2.0.2, with Nano S and Nano X.
meshcollider:
re-code-review ACK 1c4b456e1a0ccf0397d652f8c18201c3224c5c21
Tree-SHA512: 3503113c5c69d40adb6ce364d8e7cae23ce82d032a00474ba9aeb6202eb70f496ef4a6bf2e623e5171e524ad31ade7941a4e0e89539c64518aaec74f4562d86b
Stop giving GUI access to destdata rows in database. Replace with narrow
API just for saving and reading receive request information.
This simplifies code and should prevent the GUI from interfering with
other destdata like address-used status.
Note: No user-visible behavior is changing in this commit. New
CWallet::SetAddressReceiveRequest() implementation avoids a bug in
CWallet::AddDestData() where a modification would leave the previous
value in memory while writing the new value to disk. But it doesn't
matter because the GUI doesn't currently expose the ability to modify
receive requests, only to add and erase them.
No longer create a default wallet. The default wallet will still be
loaded if it exists and not other wallets were specified (anywhere,
including settings.json, bitcoin.conf, and command line).
Tests are updated to be started with -wallet= if they need the default
wallet.
Added test to wallet_startup.py testing that no default wallet is
created and that it is loaded if it exists and no other wallets were
specified.
Add WalletClient interface so node interface is cleaner and don't need
wallet-specific methods.
The new NodeContext::wallet_client pointer will also be needed to eliminate
global wallet variables like ::vpwallets, because createWallet(), loadWallet(),
getWallets(), etc methods called by the GUI need a way to get a reference to
the list of open wallets if it is no longer a global variable.
Also tweaks splash screen registration for load wallet events to be delayed
until after wallet client is created.
fa927ff884ae373c676deed63180a8d238872cdc Enable Wswitch for OutputType (MarcoFalke)
faddad71f648ed99734f4f8811bd4bc7232ca670 Remove confusing OutputType::CHANGE_AUTO (MarcoFalke)
fa2eb383522249a5f4d48726c520cec5de496614 interfaces: Remove unused getDefaultChangeType (MarcoFalke)
Pull request description:
`OutputType::CHANGE_AUTO` is problematic for several reasons:
* An output that is not change must never be described by `CHANGE_AUTO`. Simply allowing that option makes the code confusing and review harder than it needs to be.
* To make review even harder, `CHANGE_AUTO` requires `-Wswitch` to be disabled for `OutputType`
Fix both issues by removing `CHANGE_AUTO` and then enabling `-Wswitch` for `OutputType`
ACKs for top commit:
promag:
Code review ACK fa927ff884ae373c676deed63180a8d238872cdc.
laanwj:
Code review ACK fa927ff884ae373c676deed63180a8d238872cdc
Tree-SHA512: 24fd809757aa343866c94dafe9a7130b50cda4f77c97666d407f99b813f75b115a7d8e688a6bc2a737e87cba64ddd4e43f2b3c5538fd35fabb5845807bb39134
In FillPSBT, optionally report the number of inputs we successfully
signed, as an out parameter. If "sign" is false, instead report the
number of inputs for which GetSigningProvider does not return nullptr.
(This is a potentially overbroad estimate of inputs we could sign.)
d3a56be77a9d112cde4baef4314882170b9f228f Revert "gui: Avoid Wallet::GetBalance in WalletModel::pollBalanceChanged" (Russell Yanofsky)
bf0a510981ddc28c754881ca21c50ab18e5f2b59 gui: Avoid wallet tryGetBalances calls before TransactionChanged or BlockTip notifications (Russell Yanofsky)
2bc9b92ed8b7736ad67876398a0bb8287f57e9b3 Cancel wallet balance timer when shutdown requested (Russell Yanofsky)
83f69fab3a1ae97c5cff8ba1e6fd191b0fa264bb Switch transaction table to use wallet height not node height (Russell Yanofsky)
Pull request description:
Main commit `gui: Avoid wallet tryGetBalances calls` is one-line change to `WalletModel::pollBalanceChanged` that returns early if there hasn't been a new `TransactionChanged` or `BlockTip` notification since the previous poll call. This is the same behavior that was implemented in #18160, now implemented in a simpler way.
The other commits are a straight revert of #18160, and two tweaks to avoid relying on `WalletModel::m_client_model` lifetime which were causing travis failures with earlier versions of this PR.
Motivation for this change is to be able to revert #18160 and cut down on unnecessary cross-process calls that happen when #18160 is combined with #10102
This PR is part of the [process separation project](https://github.com/bitcoin/bitcoin/projects/10).
ACKs for top commit:
jonasschnelli:
utACK d3a56be77a9d112cde4baef4314882170b9f228f
Tree-SHA512: 3cd31ca515e77c3bd7160d3f1ea0dce5050d4038b2aa441b6f66b8599bd413d81ca5542a197806e773d6092dd1d26830932b1cecbc95298b1f1ab41099e2f12f
Also, mark feebumper bilingual_str as Untranslated
They are technical and have previously not been translated either.
It is questionable whether they can even appear in the GUI.
This reverts commit 0933a37078e1ce3a3d70983c3e7f4b3ac6c3fa37 from
https://github.com/bitcoin/bitcoin/pull/18160 which no longer an optimization
since commit "gui: Avoid wallet tryGetBalances calls before TransactionChanged
or BlockTip notifications".
This change is intended to make the bitcoin node and its rpc, network
and gui interfaces more responsive while the wallet is in use. Currently
because the node's cs_main mutex is always locked before the wallet's
cs_wallet mutex (to prevent deadlocks), cs_main currently stays locked
while the wallet does relatively slow things like creating and listing
transactions.
This commit only remmove chain lock tacking in wallet code, and invert
lock order from cs_main, cs_wallet to cs_wallet, cs_main.
must happen at once to avoid any deadlock. Previous commit were only
removing Chain::Lock methods to Chain interface and enforcing they
take cs_main.
Remove LockChain method from CWallet and Chain::Lock interface.
3ce16ad2f91d1e2edc7e7bdc5a19f72aa8c3e739 refactor: Use psbt forward declaration (Russell Yanofsky)
1dde238f2c21a0cc9bada10a2449cf9c6b2178ad Add ChainClient setMockTime, getWallets methods (Russell Yanofsky)
Pull request description:
This PR is part of the [process separation project](https://github.com/bitcoin/bitcoin/projects/10).
These changes are needed to set mock times, and get wallet interface pointers correctly when
wallet code is running in a different process from node code in #10102
ACKs for top commit:
MarcoFalke:
re-ACK 3ce16ad2f91d1e2edc7e7bdc5a19f72aa8c3e739 🔙
promag:
Code review ACK 3ce16ad2f91d1e2edc7e7bdc5a19f72aa8c3e739.
Tree-SHA512: 6c093bfcd68adf5858a1aade4361cdb7fb015496673504ac7a93d0bd2595215047184551d6fd526baa27782331cd2819ce45c4cf923b205ce93ac29e485b5dd8
0933a37078e1ce3a3d70983c3e7f4b3ac6c3fa37 gui: Avoid Wallet::GetBalance in WalletModel::pollBalanceChanged (João Barbosa)
Pull request description:
Each 250ms the slot `WalletModel::pollBalanceChanged` is called which, at worst case, calls `Wallet::GetBalance`. This is a waste of resources since most of the time there aren't new transactions or new blocks. Fix this by early checking if cache is dirty or not.
The actual balance computation can still hang the GUI thread but that is tracked in #16874 and should be fixed with a solution similar to #17135.
ACKs for top commit:
hebasto:
ACK 0933a37078e1ce3a3d70983c3e7f4b3ac6c3fa37, I have not tested the code, but I have reviewed it and it looks OK, I agree it can be merged.
jonasschnelli:
utACK 0933a37078e1ce3a3d70983c3e7f4b3ac6c3fa37
instagibbs:
ACK 0933a37078e1ce3a3d70983c3e7f4b3ac6c3fa37
ryanofsky:
Code review ACK 0933a37078e1ce3a3d70983c3e7f4b3ac6c3fa37, but I would prefer (not strongly) for #17905 to be merged first. This PR can be simpler if it is based on #17905, so tryGetBalances can just be left alone instead of changing into to a more complicated tryGetBalancesIfNeeded function, and then getting changed back later when we want to optimize it out.
jonatack:
ACK 0933a37078e based primarily on code review, despite a lot of manual testing with a large 177MB wallet.
Tree-SHA512: 18db35bf33a7577666658c8cb0b57308c8474baa5ea95bf1468cd8531a69857d8915584f6ac505874717aa6aabeb1b506ac77630f8acdb6651afab89275e38a1
c3857c5fcb21836ddc1b79a6b19cffe562cade10 wallet: remove CreateTotalBumpTransaction() (Jon Atack)
4a0b27bb01738e6917e27b2cf47f9a8536249693 wallet: remove totalfee from createBumpTransaction() (Jon Atack)
e347cfa9a7244277f9d220a4dc3537182f18441e rpc: remove deprecated totalFee arg from RPC bumpfee (Jon Atack)
bd05f96d79df1a1561f84850d777808f8575fb8b test: delete wallet_bumpfee_totalfee_deprecation.py (Jon Atack)
a6d1ab8caa63bd343207baa60edb705209f16fb4 test: update bumpfee testing from totalFee to fee_rate (Jon Atack)
Pull request description:
Since 0.19, fee-bumping using `totalFee` was deprecated in #15996 and replaced by `fee_rate` in #16727. This changeset removes it.
ACKs for top commit:
laanwj:
ACK c3857c5fcb21836ddc1b79a6b19cffe562cade10
Tree-SHA512: c1bb15d664baf4d2dea06981f36384af02057d125c51fcbc8640b9d5563532187c7b84aa952f7b575255a88ce383ed4d7495bec920a47b05b6fc0d432dce1f00
Replace by privateKeysDisabled method to avoid need for GUI to reference
internal wallet flags.
Also remove adjacent WalletModel canGetAddresses wrapper that serves no purpose
and make Wallet::canGetAddresses non-const so it can be implemented by IPC
classes in #10102.
Not all ScriptPubKeyMans will be able to provide private keys,
but pubkeys and scripts should be. So only provide public-only
SigningProviders, i.e. ones that can help with Solving.
