To bridge the time until a dynamic method for determining this fee is
merged.
This is especially aimed at the stable releases (0.10, 0.11) because
full mempool limiting, as will be in 0.12, is too invasive and risky to
backport.
Github-Pull: #6793
Rebased-From: 28e3249e534e2efb3c5f
The main effect is to exit processing for recently-rejected hashes,
in case they are pushed to us without prior advertisement. This
behavior was seen in the wild.
An additional effect is to do early checks for mempool or mapOrphan
existence. No logging or nDoS tracking is needed for failures of
these checks.
This adds SCRIPT_VERIFY_LOW_S to STANDARD_SCRIPT_VERIFY_FLAGS which
will make the node require the canonical 'low-s' encoding for
ECDSA signatures when relaying or mining.
Consensus behavior is unchanged.
The rational is explained in a81cd96805:
Absent this kind of test ECDSA is not a strong signature as given
a valid signature {r, s} both that value and {r, -s mod n} are valid.
These two encodings have different hashes allowing third parties a
vector to change users txids. These attacks are avoided by picking
a particular form as canonical and rejecting the other form(s); in
the of the LOW_S rule, the smaller of the two possible S values is
used.
If widely deployed this change would eliminate the last remaining
known vector for nuisance malleability on boring SIGHASH_ALL
p2pkh transactions. On the down-side it will block most
transactions made by sufficiently out of date software.
Unlike the other avenues to change txids on boring transactions this
one was randomly violated by all deployed bitcoin software prior to
its discovery. So, while other malleability vectors where made
non-standard as soon as they were discovered, this one has remained
permitted. Even BIP62 did not propose applying this rule to
old version transactions, but conforming implementations have become
much more common since BIP62 was initially written.
Bitcoin Core has produced compatible signatures since a28fb70e in
September 2013, but this didn't make it into a release until 0.9
in March 2014; Bitcoinj has done so for a similar span of time.
Bitcoinjs and electrum have been more recently updated.
This does not replace the need for BIP62 or similar, as miners can
still cooperate to break transactions. Nor does it replace the
need for wallet software to handle malleability sanely[1]. This
only eliminates the cheap and irritating DOS attack.
[1] On the Malleability of Bitcoin Transactions
Marcin Andrychowicz, Stefan Dziembowski, Daniel Malinowski, Łukasz Mazurek
http://fc15.ifca.ai/preproceedings/bitcoin/paper_9.pdf
Rebased-From: b196b685c9
Github-Pull: #6769
This avoids that premature return in the condition that a new chain is initialized
results in NULL pointer errors due to recentReject not being constructed.
Also add assertions where it is used.
(cherry picked from commit a8d0407c4f)
Nodes can have divergent policies on which transactions they will accept
and relay. This can cause you to repeatedly request and reject the same
tx after its inved to you from various peers which have accepted it.
Here we add rolling bloom filter to keep track of such rejections,
clearing the filter every time the chain tip changes.
Credit goes to Alex Morcos, who created the patch that this code is
based on.
Original code by Peter Todd. Refactored to not construct the
filter at startup time by Pieter Wuille.
(cherry picked from commit 0847d9cb5f)
While CBloomFilter is usually used with an explicitly set nTweak,
CRollingBloomFilter is only used internally. Requiring every caller to
set nTweak is error-prone and redundant; better to have the class handle
that for you with a high-quality randomness source.
Additionally when clearing the filter it makes sense to change nTweak as
well to recover from a bad setting, e.g. due to insufficient randomness
at initialization, so the clear() method is replaced by a reset() method
that sets a new, random, nTweak value.
(cherry picked from commit d2d7ee0e86)
45bfa13 PARTIAL: typofixes (found by misspell_fixer) (Veres Lajos)
21c406e add support for miniupnpc api version 14 (Pavel Vasin)
13bd5a7 rpc-tests: re-enable rpc-tests for Windows (Cory Fields)
ccc4ad6 net: Set SO_REUSEADDR for Windows too (Cory Fields)
1f6772e add unit test for CNetAddr::GetGroup. (Alex Morcos)
13642a5 Fix masking of irrelevant bits in address groups. (Alex Morcos)
6b51b9b Replace boost::reverse_lock with our own. (Casey Rodarmor)
626c5e6 Make sure we re-acquire lock if a task throws (Casey Rodarmor)
4877053 Add missing files to files.md (fanquake)
f171fee Handle leveldb::DestroyDB() errors on wipe failure (Adam Weiss)
c5b89fe Fix race condition on test node shutdown (Casey Rodarmor)
4a37410 Handle no chain tip available in InvalidChainFound() (Ross Nicoll)
f6d29a6 Use unique name for AlertNotify tempfile (Casey Rodarmor)
e6adac7 Delay initial pruning until after wallet init (Adam Weiss)
e0020d4 Make sure LogPrint strings are line-terminated (J Ross Nicoll)
7ff9d12 Make sure LogPrintf strings are line-terminated (Wladimir J. van der Laan)
5a39133 build: fix libressl detection (Cory Fields)
f6355e6 Avoid leaking file descriptors in RegisterLoad (Casey Rodarmor)
60457d3 locking: fix a few small issues uncovered by -Wthread-safety (Cory Fields)
a496e11 Remove bash test note from rpc-tests readme (fanquake)
49c6a64 tests: Remove old sh-based test framework (Wladimir J. van der Laan)
a37567d Add autogen.sh to source tarball. (randy-waterhouse)
1f4d7cf travis: for travis generating an extra build (Cory Fields)
The thin space QT html hack results in cut-off chars/nums after a line break.
Avoid word wrap line breaks by using a smaller font and a line break before each alternative value)
Rebased-From: 24cb7c7bbb
Github-Pull: #6694
When running the rpc tests in Wine, nodes often fail to listen on localhost
due to a stale socket from a previous run. This aligns the behavior with other
platforms.
Add error checking to CLevelDBWrapper for errors from
leveldb::DestroyDB(). Without it, if unlink() or DeleteFileW() fail to
delete files, they will fail silent. If they fail to delete any files,
CLevelDBWrapper will silently open and read the existing database.
Typically any permissions issues would be caught by leveldb as it churns
through many files as part of its compaction process, but it is
conceivable that this could cause problems on Windows with anti-virus
and indexing software.
Handle the case where no chain tip is available, in InvalidChainFound(). This fixes a null pointer deference when running unit tests, if the genesis block or block validation code is broken.
- rpcwallet: No need to lock twice here
- openssl: Clang doesn't understand selective lock/unlock here. Ignore it.
- CNode: Fix a legitimate (though very unlikely) locking bug.
QT_NO_KEYWORDS prevents Qt from defining the `foreach`, `signals`,
`slots` and `emit` macros.
Avoid overlap between Qt macros and boost - for example #undef hackiness
in #6421.
Conflicts:
src/qt/addressbookpage.cpp
src/qt/peertablemodel.cpp
src/qt/receivecoinsdialog.cpp
src/qt/rpcconsole.cpp
Rebased-From: d29ec6c230
Github-Pull: #6433
- Moved all seed related scripts to contrib/seeds for consistency
- Updated `makeseeds.py` to handle IPv6 and onions, fix regular
expression for recent Bitcoin Core versions
- Fixed a bug in `generate-seeds.py` with regard to IPv6 parsing
Allow for non-8333 nodes to appear in the internal seeds. This will
allow bitcoind to bypas a filter on 8333. This also makes it possible to
use the same tool for e.g. testnet.
As hosts with multiple nodes per IP are likely abusive, add a filter to
remove these (the ASN check will take care of them for IPv4, but not
IPv6 or onion).
Github-Pull: #6333
Rebased-From: ccd4369a23884454aebeb9329536cd
This prevents an edge case where a block downloaded and pruned
in-between successive calls to FindNextBlocksToDownload could
cause the block to be unnecessarily re-requested.
Github-Pull: #6233
Rebased-From: 3e9143386a
- fixes#3136
- the problem is related to Boost path and a static initialized internal
pointer
- using a std::string in CDBEnv::EnvShutdown() prevents the problem
- this removes the boost::filesystem::path path field from CDBEnv
Github-Pull: #6282
Rebased-From: 0ce30eaa36
Some boost versions have a conflicting overload of wait_until that returns void.
Explicitly use a template here to avoid hitting that overload.
Github-Pull: #6285
Rebased-From: 72bf90d770
The partition checking code was using chainActive timestamps
to detect partitioning; with headers-first syncing, it should use
(and with this pull request, does use) pIndexBestHeader timestamps.
Fixes issue #6251
Github-Pull: #6256
Rebased-From: 65b9454503
