6967e8e8ab add more bad p2p ports (Jameson Lopp)
Pull request description:
Add a few more ports used by extremely well adopted services that require authentication and really ought not be used by bitcoin nodes for p2p traffic.
ACKs for top commit:
Sjors:
utACK 6967e8e8ab
l0rinc:
ACK 6967e8e8ab
glozow:
ACK 6967e8e8ab
Tree-SHA512: bbe86aef2be9727338712ded8f90227f5d12f633ab5d324c8907c01173945d1c4d9899e05565f78688842bbf5ebb010d22173969e4168ea08d4e33f01fe9569d
fa94fd53c9 doc: Explain how to fetch commits directly (MarcoFalke)
Pull request description:
This is often needed, and works better than the existing refspec documentation, because even commits that have been force-pushed away can be fetched (as long as they are not garbage collected on the remote).
ACKs for top commit:
Sjors:
ACK fa94fd53c9
l0rinc:
ACK fa94fd53c9
willcl-ark:
ACK fa94fd53c9
rkrux:
ACK fa94fd53c9
janb84:
ACK fa94fd53c9
Tree-SHA512: b68c0c612e13f501ad4c1c709502e060b0a2d0eb55ef888c7466e2a10bdf3ca63d81b8bd7927de49cde9e29f0b06f8233d51b99d015ae0b39d556854be542b8a
53a996f122 doc: fix transifex 404s (fanquake)
Pull request description:
https://www.transifex.com/bitcoin/bitcoin/ is now a 404.
ACKs for top commit:
maflcko:
lgtm ACK 53a996f122
hebasto:
ACK 53a996f122, I've verified all the links.
Tree-SHA512: 8e698c83095a3d3a225b0bf2ee9c39ad434b2917ead4271ff39a282cea6283710091d1e8b91edafd280bf356dec2bdbe42981aafe4d64f623a975232c5ca848c
61ea5f348d fuzz: doc: add info about `afl-system-config` for macOS (brunoerg)
Pull request description:
`afl-system-config` adjusts the shared memory segment size limits and configures kernel parameters for better fuzzing performance. Since macOS has more conservative values on shared memory, it's necessary to run `afl-system-config`, or manually adjust the values to fuzz with AFL++.
e.g.:
```sh
kern.sysv.shmmax: 524288000
kern.sysv.shmmin: 1
kern.sysv.shmseg: 48
kern.sysv.shmall: 131072000
```
ACKs for top commit:
janb84:
reACK [61ea5f3](61ea5f348d)
w0xlt:
ACK 61ea5f348d
Crypt-iQ:
ACK 61ea5f3
Tree-SHA512: 8fd9fcb397a6b22e344ac37d3d18052ce8b6b32a5118ab3554c49116d7dd8769cdcbad41f0784d9ab525d4284a82e3d7a89b2c66966b725bf3781d9389d7454d
e98c51fcce doc: update tor.md to mention the new -proxy=addr:port=tor (Vasil Dimov)
ca5781e23a config: allow setting -proxy per network (Vasil Dimov)
Pull request description:
`-proxy=addr:port` specifies the proxy for all networks (except I2P). Previously only the Tor proxy could have been specified separately via `-onion=addr:port`.
Make it possible to specify separately the proxy for IPv4, IPv6, Tor and CJDNS by e.g. `-proxy=addr:port=ipv6`. Or remove the proxy for a given network, e.g. `-proxy=0=cjdns`.
Resolves: https://github.com/bitcoin/bitcoin/issues/24450
ACKs for top commit:
pinheadmz:
ACK e98c51fcce
caesrcd:
reACK e98c51fcce
danielabrozzoni:
Code Review ACK e98c51fcce
1440000bytes:
ACK e98c51fcce
Tree-SHA512: 0cb590cb72b9393cc36357e8bd7861514ec4c5bc044a154e59601420b1fd6240f336ab538ed138bc769fca3d17e03725d56de382666420dc0787895d5bfec131
fac00d4ed3 doc: Move CI-must-pass requirement into readme section (MarcoFalke)
fab79c1a25 doc: Clarify and move "hygienic commit" note (MarcoFalke)
fac8b05197 doc: Clarify strprintf size specifier note (MarcoFalke)
faaf34ad72 doc: Remove section about RPC alias via function pointer (MarcoFalke)
2222d61e1c doc: Remove section about RPC arg names in table (MarcoFalke)
fa00b8c02c doc: Remove section about include guards (MarcoFalke)
fad6cd739b doc: Remove dev note section on includes (MarcoFalke)
fa6623d85a doc: Remove file name section (MarcoFalke)
7777fb8bc7 doc: Remove shebang section (MarcoFalke)
faf65f0531 doc: Remove .gitignore section (MarcoFalke)
faf2094f25 doc: Remove note about removed ParsePrechecks (MarcoFalke)
fa69c5b170 doc: Remove -disablewallet from dev notes (MarcoFalke)
Pull request description:
This removes sections that I've been collecting as stale or overly redundant over the years. The rationale for each removal is in the commit message.
ACKs for top commit:
yuvicc:
ACK fac00d4ed3
janb84:
LGTM ACK fac00d4ed3
glozow:
ACK fac00d4ed3, all lgtm
Tree-SHA512: 17a5b4277fb30d265959d1230a705b36d8501a64c0f4a7f272ea5d9c22031421f95c491144f6d6f714dc7927df667d96ece9ceb43e0a07317d76fdcc4769aaa7
32d4e92b9a doc: make `-DWITH_ZMQ=ON` explicit on `build-unix.md` (Luis Schwab)
Pull request description:
ZMQ support is not built by default on Linux, and the docs don't make that clear. This PR makes it explicit that the `-DWITH_ZMQ=ON` flag is required to build with ZMQ support on `build-unix.md`.
ACKs for top commit:
maflcko:
lgtm ACK 32d4e92b9a
Tree-SHA512: 322d0dd86bb80aa5a5640a5510cbeeec29f490c33b8f7360e3a202147a02c303064e6761ceb42e38e26982c61f35c9b048804c705a0d95c5737ebd2109febead
a189d63618 add release note for datacarriersize default change (Greg Sanders)
a141e1bf50 Add more OP_RETURN mempool acceptance functional tests (Peter Todd)
0b4048c733 datacarrier: deprecate startup arguments for future removal (Greg Sanders)
63091b79e7 test: remove unnecessary -datacarriersize args from tests (Greg Sanders)
9f36962b07 policy: uncap datacarrier by default (Greg Sanders)
Pull request description:
Retains the `-datacarrier*` args, marks them as deprecated, and does not require another startup argument for multiple OP_RETURN outputs.
If a user has set `-datacarriersize` the value is "budgeted" across all seen OP_RETURN output scriptPubKeys. In other words the total script bytes stays the same, but can be spread across any number of outputs. This is done to not introduce an additional argument to support multiple outputs.
I do not advise people use the option with custom arguments and it is marked as deprecated to not mislead as a promise to offer it forever. The argument itself can be removed in some future release to clean up the code and minimize footguns for users.
ACKs for top commit:
stickies-v:
re-ACK a189d63618
Sjors:
re-ACK a189d63618
polespinasa:
re-ACK a189d63618
hodlinator:
re-ACK a189d63618
ajtowns:
reACK a189d63618
mzumsande:
re-ACK a189d63618
petertodd:
ACK a189d63618
theStack:
re-ACK a189d63618
1440000bytes:
re-ACK a189d63618
willcl-ark:
ACK a189d63618
dergoegge:
ACK a189d63618
fanquake:
ACK a189d63618
murchandamus:
ACK a189d63618
darosior:
Concept ACK a189d63618.
Tree-SHA512: 3da2f1ef2f50884d4da7e50df2121bf175cb826edaa14ba7c3068a6d5b2a70beb426edc55d50338ee1d9686b9f74fdf9e10d30fb26a023a718dd82fa1e77b038
4ce53495e5 doc: update tor docs to use bitcoind binary from path (ismaelsadeeq)
Pull request description:
I noticed this while trying to run a node over Tor.
Using `./bitcoind` as the executable path is incorrect.
This is a simple documentation update PR that fixes the path by removing the prefix and just
having `bitcoind` as the usage example targeting those who have Bitcoin Core in their PATH.
ACKs for top commit:
davidgumberg:
ACK 4ce53495e5
janb84:
ACK 4ce53495e5
jonatack:
ACK 4ce53495e5
Tree-SHA512: a23c94a175f77d66ee1a81599a15a809ad768090eebb619c8e4a67b8a020a2256da4f40cec3c00ec35775b265d3c53cdb70c09fbed48d399416fbc9156ebff31
One of the benefits of using a compilation database, which is available
after the CMake build system generation step, is that it is not
necessary to actually build the code in order to run `clang-tidy`.
a5ac43d98d doc: Add release notes describing bitcoin wrapper executable (Ryan Ofsky)
258bda80c0 doc: Mention bitcoin wrapper executable in documentation (Ryan Ofsky)
d2739d75c9 build: add bitcoin.exe to windows installer (Sjors Provoost)
ba649c0006 ci: Run multiprocess tests through wrapper executable (Ryan Ofsky)
29bdd743bb test: Support BITCOIN_CMD environment variable (Ryan Ofsky)
9c8c68891b multiprocess: Add bitcoin wrapper executable (Ryan Ofsky)
5076d20fdb util: Add cross-platform ExecVp and GetExePath functions (Ryan Ofsky)
Pull request description:
Intended to make bitcoin command line features more discoverable and allow installing new multiprocess binaries in libexec/ instead of bin/ so they don't cause confusion.
Idea and implementation of this were discussed in https://github.com/bitcoin/bitcoin/issues/30983.
---
Initial implementation of this feature is deliberately minimal so the UX can evolve in response to feedback and there are not too many details to debate and discuss in a single PR. But many improvements are possible or planned:
- Adding manpage and bash completions.
- Showing nicer error messages that detect if an executable isn't installed and suggest how to fix [(comment)](https://github.com/bitcoin/bitcoin/pull/31375#discussion_r2073194474)
- Showing wrapper command lines in subcommand in help output [(comment)](https://github.com/bitcoin/bitcoin/pull/31375#discussion_r2077800405). This could be done conditionally as suggested in the comment or be unconditional.
- Showing wrapper command lines in subcommand error output. There is a bitcoin-cli error pointed out in [(comment)](https://github.com/bitcoin/bitcoin/pull/31375#discussion_r2091152243) that is needlessly confusing.
- Integrating help so `bitcoin help subcommand` invokes `bitcoin subcommand -h`. `bitcoin -h subcommand` should also be supported and be equivalent [(comment)](https://github.com/bitcoin/bitcoin/pull/31375#discussion_r2093116725)
- Adding support for `bitcoin-util` subcommands. Ideal interface would probably be more like `bitcoin grind` not `bitcoin util grind` but this has been punted for now. Supporting subcommands directly would require some ArgsManager modifications
- Adding a dedicated python functional test for the wrapper. Right now there is some CI coverage by setting the `BITCOIN_CMD` variable, but this doesn't cover things like the help output and version output, and support for different directory layouts.
- Better `--multiprocess` (`-m`) / `--monolithic` (`-M`) default selection. Right now, default is monolithic but it probably makes sense to chose more intelligently depending on whether -ipc options are enabled and what binaries are available.
- Maybe parsing `bitcoin.conf` and supporting options to control wrapper behavior like custom locations or preferences or aliases.
- Better command command line usability. Allow combining short options like (`-ah`). Allow fuzzy matching of subcommands or suggestions if you misspell. (suggested by stickies in review club)
- Not directly related to this PR but `bitcoin-cli named` implementation used by the wrapper should do a better job disambiguating named arguments from base64 arguments ending in = as pointed out in [(comment)](https://github.com/bitcoin/bitcoin/pull/31375#discussion_r2091886628)
---
This PR is part of the [process separation project](https://github.com/bitcoin/bitcoin/issues/28722). A review club meeting for it took place in https://bitcoincore.reviews/31375
ACKs for top commit:
Sjors:
utACK a5ac43d98d
achow101:
ACK a5ac43d98d
vasild:
ACK a5ac43d98d
theStack:
ACK a5ac43d98d
ismaelsadeeq:
fwiw my last review implied an ACK a5ac43d98d
hodlinator:
ACK a5ac43d98d
Tree-SHA512: 570e6a4ff8bd79ef6554da3d01f36c0a7c6d2dd7dace8f8732eca98f4a8bc2284474a9beadeba783114fe2f3dd08b2041b3da7753bae0b7f881ec50668cb821f
This is already checked by test/lint/lint-files.py
There is no need to reword all linters into the dev notes.
Also, allow scripts in Rust (there are already some).
e8661aac75 wallet: drop watch-only things from interface (Sjors Provoost)
e99188e7da qt: drop unused watch-only functionality (Sjors Provoost)
Pull request description:
The watch-only functionality in the GUI was only used for legacy wallets. Watch-only descriptor wallets do not use this.
The only visible changes of this PR should be:
- dropped "Spendable:" label from the overview tab
- column width cache is reset
This PR also removes some unused variables from the interface.
ACKs for top commit:
davidgumberg:
Review ACK e8661aac75.
hebasto:
ACK e8661aac75, I have reviewed the code and it looks OK. The `src/qt/forms/overviewpage.ui` form was reviewed in Qt Designer.
Tree-SHA512: d7edb0f167e0b934075398a76eddca69890bb36848a918c932b1c2cea85ee87285e876cbfdf1f6dec7adf26b9f405fb558c70bec0c84585c0a9df33c2af78393
faf55fc80b doc: Remove ParseInt mentions in documentation (MarcoFalke)
3333282933 refactor: Remove unused Parse(U)Int* (MarcoFalke)
fa84e6c36c bitcoin-tx: Reject + sign in MutateTxDel* (MarcoFalke)
face2519fa bitcoin-tx: Reject + sign in vout parsing (MarcoFalke)
fa8acaf0b9 bitcoin-tx: Reject + sign in replaceable parsing (MarcoFalke)
faff25a558 bitcoin-tx: Reject + sign in locktime (MarcoFalke)
dddd9e5fe3 bitcoin-tx: Reject + sign in nversion parsing (MarcoFalke)
fab06ac037 rest: Use SAFE_CHARS_URI in SanitizeString error msg (MarcoFalke)
8888bb499d rest: Reject + sign in /blockhashbyheight/ (MarcoFalke)
fafd43c691 test: Reject + sign when parsing regtest deployment params (MarcoFalke)
fa123afa0e Reject + sign when checking -ipcfd (MarcoFalke)
fa479857ed Reject + sign in SplitHostPort (MarcoFalke)
fab4c2967d net: Reject + sign when parsing subnet mask (MarcoFalke)
fa89652e68 init: Reject + sign in -*port parsing (MarcoFalke)
fa9c45577d cli: Reject + sign in -netinfo level parsing (MarcoFalke)
fa98041325 refactor: Use ToIntegral in CreateFromDump (MarcoFalke)
fa23ed7fc2 refactor: Use ToIntegral in ParseHDKeypath (MarcoFalke)
Pull request description:
The legacy int parsing is problematic, because it accepts the `+` sign for unsigned integers. In all cases this is either:
* Useless, because the `+` sign was already rejected.
* Erroneous and inconsistent, when third party parsers reject it. (C.f. https://github.com/bitcoin/bitcoin/pull/32365)
* Confusing, because the `+` sign is neither documented, nor can it be assumed to be present.
Fix all issues by removing the legacy int parsing.
ACKs for top commit:
stickies-v:
re-ACK faf55fc80b
brunoerg:
code review ACK faf55fc80b
Tree-SHA512: a311ab6a58fe02a37741c1800feb3dcfad92377b4bfb61b433b2393f52ba89ef45d00940972b2767b213a3dd7b59e5e35d5b659c586eacdfe4e565a77b12b19f
fa9198af55 lint: Check for missing trailing newline (MarcoFalke)
fa2b2aa27c lint: Add archived notes to default excludes (MarcoFalke)
Pull request description:
A missing trailing newline is harmless, but a bit problematic:
* `git` shows a warning by default
* After another line is appended, the diff will be verbose and `git blame` will be wrong for the "untouched" line.
Fix the problems by just requiring what is already the default, see also 663a9cabf8/.editorconfig (L9) and 663a9cabf8/test/lint/test_runner/src/main.rs (L327)
ACKs for top commit:
l0rinc:
utACK fa9198af55
fanquake:
ACK fa9198af55
Tree-SHA512: d144eebdeee68fc3404aa4a66ecd5c130f907ed4b869bd300f6e9ed74d125561d1f4cdd6dd20d9e969471a7d007399f928f072d1c1f626275ca31f32bc23fdbc
In the dev notes, remove the whole section, because:
* ParseDouble was removed in commit
fa9d72a794
* The locale-dependent atoi is already checked by
test/lint/lint-locale-dependence.py
Co-authored-by: Fabian Jahr <fjahr@protonmail.com>
The watch-only functionality in the GUI was only used for legacy wallets.
Watch-only descriptor wallets do not use this.
The only visible changes of this commit are:
- dropped "Spendable:" label from the overview tab
- column width cache is reset
301993ebf7 init: drop -upnp (fanquake)
Pull request description:
This was slated for removal in `30.0`, so remove it.
ACKs for top commit:
i-am-yuvi:
ACK 301993ebf7
maflcko:
review ACK 301993ebf7
darosior:
tACK 301993ebf7
Tree-SHA512: 635e374c013fa08c4cda7caadc465c89bb376d3ee2c66f67a27e3ed9031844674d3e996169aaffb9b65a67b0d44d92aaec000aaf69abe3dd10fce2f4138f3e27
fa2c662362 build: Revert "Temporarily disable compiling `fuzz/utxo_snapshot.cpp` with MSVC" (MarcoFalke)
Pull request description:
Now that GitHub Actions has a fixed version and the Windows developers have updated their compiler, the workaround is no longer needed.
ACKs for top commit:
davidgumberg:
reACK fa2c662362
hodlinator:
ACK fa2c662362
Tree-SHA512: 952b36c917c91d78d82b5013e1df338b23f860fad7be43327150581f403050e61f748fc75557ec96fb2b115a2cc0246a506bc2ddc25e05f5a41339bd466c4b1a
