c1059c9fef
4394733331Add DEBUG_LOCKCONTENTION documentation to the developer notes (Jon Atack)39a34b6877Put lock logging behind DEBUG_LOCKCONTENTION preprocessor directive (Jon Atack) Pull request description: This is a more minimal, no-frills version of #24734 for backport. The other fixes and improvements in that pull can be done after. *Copy of the PR 24734 description:* PRs #22736, #22904 and #23223 changed lock contention logging from a `DEBUG_LOCKCONTENTION` compile-time preprocessor directive to a runtime `lock` log category and improved the logging output. This changed the locking from using `lock()` to `try_lock()`: - `void Mutex::UniqueLock::lock()` acquires the mutex and blocks until it gains access to it - `bool Mutex::UniqueLock::try_lock()` doesn't block but instead immediately returns whether it acquired the mutex; it may be used by `lock()` internally as part of the deadlock-avoidance algorithm In theory the cost of `try_lock` might be essentially the [same](https://www.erisian.com.au/bitcoin-core-dev/log-2022-03-31.html#l-697) relative to `lock`. The test-and-set logic of these calls is purported to be ~ constant time, optimised and light/quick if used carefully (i.e. no mutex convoying), compared to system calls, memory/cache coherency and fences, wait queues, and (particularly) lock contentions. See the discussion around https://github.com/bitcoin/bitcoin/pull/22736#issuecomment-902851054 and after with respect to performance/cost aspects. However, there are reasonable concerns (see [here](https://github.com/bitcoin/bitcoin/pull/22736#discussion_r691277896) and [here](https://www.erisian.com.au/bitcoin-core-dev/log-2022-03-31.html#l-620)) that `Base::try_lock()` may be potentially [costly](https://www.erisian.com.au/bitcoin-core-dev/log-2022-03-31.html#l-700) or [risky](https://github.com/bitcoin/bitcoin/pull/22904#issuecomment-930484001) compared to `Base::lock()` in this very frequently called code. One alternative to keep the run-time lock logging would be to gate the `try_lock` call behind the logging conditional, for example as proposed inccd73de1ddand ACKed [here](https://github.com/bitcoin/bitcoin/pull/22736#issuecomment-901980815). However, this would add the [cost](https://github.com/bitcoin/bitcoin/pull/22736#issuecomment-910102353) of `if (LogAcceptCategory(BCLog::LOCK))` to the hotspot, instead of replacing `lock` with `try_lock`, for the most frequent happy path (non-contention). It turns out we can keep the advantages of the runtime lock contention logging (the ability to turn it on/off at runtime) while out of prudence putting the `try_lock()` call and `lock` logging category behind a `DEBUG_LOCKCONTENTION` compile-time preprocessor directive, and also still retain the lock logging enhancements of the mentioned PRs, as suggested in https://github.com/bitcoin/bitcoin/pull/24734#issuecomment-1085785480 by W. J. van der Laan, in https://github.com/bitcoin/bitcoin/pull/22736#discussion_r691280693, and in the linked IRC discussion. Proposed here and for backport to v23. ACKs for top commit: laanwj: Code review ACK4394733331Tree-SHA512: 89b1271cae1dca0eb251914b1a60fc5b68320aab4a3939c57eec3a33a3c8f01688f05d95dfc31f91d71a6ed80cfe2d67b77ff14742611cc206175e47b2e5d3b1
Unit tests
The sources in this directory are unit test cases. Boost includes a unit testing framework, and since Bitcoin Core already uses Boost, it makes sense to simply use this framework rather than require developers to configure some other framework (we want as few impediments to creating unit tests as possible).
The build system is set up to compile an executable called test_bitcoin
that runs all of the unit tests. The main source file for the test library is found in
util/setup_common.cpp.
Compiling/running unit tests
Unit tests will be automatically compiled if dependencies were met in ./configure
and tests weren't explicitly disabled.
After configuring, they can be run with make check.
To run the unit tests manually, launch src/test/test_bitcoin. To recompile
after a test file was modified, run make and then run the test again. If you
modify a non-test file, use make -C src/test to recompile only what's needed
to run the unit tests.
To add more unit tests, add BOOST_AUTO_TEST_CASE functions to the existing
.cpp files in the test/ directory or add new .cpp files that
implement new BOOST_AUTO_TEST_SUITE sections.
To run the GUI unit tests manually, launch src/qt/test/test_bitcoin-qt
To add more GUI unit tests, add them to the src/qt/test/ directory and
the src/qt/test/test_main.cpp file.
Running individual tests
test_bitcoin accepts the command line arguments from the boost framework.
For example, to run just the getarg_tests suite of tests:
test_bitcoin --log_level=all --run_test=getarg_tests
log_level controls the verbosity of the test framework, which logs when a
test case is entered, for example. test_bitcoin also accepts the command
line arguments accepted by bitcoind. Use -- to separate both types of
arguments:
test_bitcoin --log_level=all --run_test=getarg_tests -- -printtoconsole=1
The -printtoconsole=1 after the two dashes redirects the debug log, which
would normally go to a file in the test datadir
(BasicTestingSetup::m_path_root), to the standard terminal output.
... or to run just the doubledash test:
test_bitcoin --run_test=getarg_tests/doubledash
Run test_bitcoin --help for the full list.
Adding test cases
To add a new unit test file to our test suite you need
to add the file to src/Makefile.test.include. The pattern is to create
one test file for each class or source file for which you want to create
unit tests. The file naming convention is <source_filename>_tests.cpp
and such files should wrap their tests in a test suite
called <source_filename>_tests. For an example of this pattern,
see uint256_tests.cpp.
Logging and debugging in unit tests
make check will write to a log file foo_tests.cpp.log and display this file
on failure. For running individual tests verbosely, refer to the section
above.
To write to logs from unit tests you need to use specific message methods
provided by Boost. The simplest is BOOST_TEST_MESSAGE.
For debugging you can launch the test_bitcoin executable with gdb or lldb and
start debugging, just like you would with any other program:
gdb src/test/test_bitcoin
Segmentation faults
If you hit a segmentation fault during a test run, you can diagnose where the fault
is happening by running gdb ./src/test/test_bitcoin and then using the bt command
within gdb.
Another tool that can be used to resolve segmentation faults is valgrind.
If for whatever reason you want to produce a core dump file for this fault, you can do
that as well. By default, the boost test runner will intercept system errors and not
produce a core file. To bypass this, add --catch_system_errors=no to the
test_bitcoin arguments and ensure that your ulimits are set properly (e.g. ulimit -c unlimited).
Running the tests and hitting a segmentation fault should now produce a file called core
(on Linux platforms, the file name will likely depend on the contents of
/proc/sys/kernel/core_pattern).
You can then explore the core dump using
gdb src/test/test_bitcoin core
(gbd) bt # produce a backtrace for where a segfault occurred