test new used drive filter

home.admin/config.scripts/blitz.data.sh

@@ -2,7 +2,7 @@
 if [ $# -eq 0 ] || [ "$1" = "-h" ] || [ "$1" = "-help" ]; then
  >&2 echo "# managing the data drive(s) with new bootable setups for RaspberryPi, VMs and Laptops"
  >&2 echo "# blitz.data.sh status   # check if system is setup and what drives are used"
- >&2 echo "# blitz.data.sh explore  # find the best drives to use for storage, system and data"
+ >&2 echo "# blitz.data.sh layout   # auto detect the old/best drives to use for storage, system and data"
  >&2 echo "# blitz.data.sh setup"
  echo "error='missing parameters'"
  exit 1
@@ -64,88 +64,103 @@ if [ "$1" = "status" ]; then
 fi
 
 ###################
-# EXPLORE
-# find the best drives to use for storage, system and data
+# LAYOUT
+# auto detect the old/best drives to use for storage, system and data
 ###################
 
-if [ "$1" = "explore" ]; then
+if [ "$1" = "layout" ]; then
 
-    # array of device names to exclude
-    alreadyUsedDevices=("sda")
-    
-    # get a list of all connected drives >63GB ordered by size (biggest first) without already used devices
+    # initial values for drives to determine
+    storageDevice=""
+    systemDevice=""
+    dataDevice=""
+
+    # get a list of all connected drives >63GB ordered by size (biggest first)
     listOfDevices=$(lsblk -dno NAME,SIZE | grep -E "^(sd|nvme)" | \
-    awk -v exclude="$(printf "%s|" "${alreadyUsedDevices[@]}" | sed 's/|$//')" '
-    BEGIN {
-        split(exclude, excludeArray, "|")
+    awk '{ 
+    size=$2
+    if(size ~ /T/) { 
+      sub("T","",size); size=size*1024 
+    } else if(size ~ /G/) { 
+      sub("G","",size); size=size*1 
+    } else if(size ~ /M/) { 
+      sub("M","",size); size=size/1024 
     }
-    {
-        size=$2
-        if(size ~ /T/) { 
-            sub("T","",size)
-            size=size*1024 
-        } else if(size ~ /G/) { 
-            sub("G","",size)
-            size=size*1 
-        } else if(size ~ /M/) { 
-            sub("M","",size)
-            size=size/1024 
-        }
-        
-        excludeDevice=0
-        for (dev in excludeArray) {
-            if ($1 == excludeArray[dev]) {
-                excludeDevice=1
-                break
-            }
-        }
-        
-        if (size >= 63 && excludeDevice == 0) {
-            printf "%s %.0f\n", $1, size
-        }
-    }' | sort -k2,2nr -k1,1)
+    if (size >= 63) printf "%s %.0f\n", $1, size
+    }' | sort -k2,2nr -k1,1 )
+    echo "listOfDevices='${listOfDevices}'"
 
-    # take the biggest drive as the storage drive
-    _storageDevice=$(echo "${listOfDevices}" | head -n1 | awk '{print $1}')
-    _storageSizeGB=$(echo "${listOfDevices}" | head -n1 | awk '{print $2}')
-  
-    # take the second biggest drive as the system drive (only in VM setups)
-    _systemDevice=$(echo "${listOfDevices}" | sed -n '2p' | awk '{print $1}')
-    _systemSizeGB=$(echo "${listOfDevices}" | sed -n '2p' | awk '{print $2}')
+    # remove lines with already used drives
+    if [ -n "${storageDevice}" ]; then
+        listOfDevices=$(echo "${listOfDevices}" | grep -v "${storageDevice}")
+    fi
+    if [ -n "${systemDevice}" ]; then
+        listOfDevices=$(echo "${listOfDevices}" | grep -v "${systemDevice}")
+    fi
+    if [ -n "${dataDevice}" ]; then
+        listOfDevices=$(echo "${listOfDevices}" | grep -v "${dataDevice}")
+    fi
+    echo "listOfDevices='${listOfDevices}'"
 
-    # if there is no spereated system drive
-    _bootFromStorage=0
-    _bootFromSD=0
+    # Set STORAGE
+    if [ ${#storageDevice} -eq 0 ]; then
+        # when no storage device yet: take the biggest drive as the storage drive
+        storageDevice=$(echo "${listOfDevices}" | head -n1 | awk '{print $1}')
+        storageSizeGB=$(echo "${listOfDevices}" | head -n1 | awk '{print $2}')
+        # remove the storage device from the list
+        listOfDevices=$(echo "${listOfDevices}" | grep -v "${storageDevice}")
+    fi
+
+    # Set SYSTEM
+    bootFromStorage=0 # signales if there is no extra system drive add boot partition to storage drive
+    bootFromSD=0      # signales if there is no extra system drive keep booting from SD card (only RaspberryPi)
+    if [ ${#systemDevice} -eq 0 ]; then
+        # when no system device yet: take the next biggest drive as the system drive
+        systemDevice=$(echo "${listOfDevices}" | head -n1 | awk '{print $1}')
+        systemSizeGB=$(echo "${listOfDevices}" | head -n1 | awk '{print $2}')
+        # remove the system device from the list
+        listOfDevices=$(echo "${listOfDevices}" | grep -v "${systemDevice}")
+    fi
+    # if there is was no spereated system drive left
     if [ ${#systemDevice} -eq 0 ]; then
         if [ "${computerType}" = "raspberrypi" ] && [ ${gotNVMe} = "0" ]; then
             # if its a RaspberryPi with a USB drive - keep system drive empty and keep booting from SD
-            _bootFromSD=1
+            bootFromSD=1
         else
             # all other like VM, RaspberryPi with a NVMe or a laptop - use the storage drive as system drive
-            _bootFromStorage=1
+            bootFromStorage=1
         fi
     fi
 
-    # take the third biggest drive as the data drive (only in VM setups)
-    _dataDevice=$(echo "${listOfDevices}" | sed -n '3p' | awk '{print $1}')
-    _dataSizeGB=$(echo "${listOfDevices}" | sed -n '3p' | awk '{print $2}')  
+    # Set DATA
+    if [ ${#dataDevice} -eq 0 ]; then
+        # when no data device yet: take the second biggest drive as the data drive
+        dataDevice=$(echo "${listOfDevices}" | head -n1 | awk '{print $1}')
+        dataSizeGB=$(echo "${listOfDevices}" | head -n1 | awk '{print $2}')
+        # remove the data device from the list
+        listOfDevices=$(echo "${listOfDevices}" | grep -v "${dataDevice}")
+    fi
+
+    # count remaining devices
+    remainingDevices=$(echo "${listOfDevices}" | wc -l)
 
     # if there is no spereated data drive - run combine data & storage partiton
-    _combinedDataStorage=0
     if [ ${#dataDevice} -eq 0 ]; then
-        _combinedDataStorage=1
+        combinedDataStorage=1
     fi
 
     # output the result
-    echo "_storageDevice='${storageDevice}'"
-    echo "_storageSizeGB='${storageSizeGB}'"
-    echo "_systemDevice='${systemDevice}'"
-    echo "_systemSizeGB='${systemSizeGB}'"
-    echo "_dataDevice='${dataDevice}'"
-    echo "_dataSizeGB='${dataSizeGB}'"
-    echo "_combinedDataStorage='${combinedDataStorage}'"
-    echo "_bootFromStorage='${bootFromStorage}'"
-    echo "_bootFromSD='${bootFromSD}'"
+    echo "storageDevice='${storageDevice}'"
+    echo "storageSizeGB='${storageSizeGB}'"
+    echo "storageRecoverPartition='${storageRecoverPartition}'"
+    echo "systemDevice='${systemDevice}'"
+    echo "systemSizeGB='${systemSizeGB}'"
+    echo "dataDevice='${dataDevice}'"
+    echo "dataSizeGB='${dataSizeGB}'"
+    echo "combinedDataStorage='${combinedDataStorage}'"
+    echo "bootFromStorage='${bootFromStorage}'"
+    echo "bootFromSD='${bootFromSD}'"
+    echo "remainingDevices='${remainingDevices}'"
 
   exit 0
 fi