updated copy script, added net-tools, added to readme

DietPi/install.md

@@ -28,7 +28,7 @@ Reboots again
 `ssh root@[IP-OF-DIETPI]`
 Now only the bash prompt opens
 
-sudo apt install rsync
+sudo apt install -y rsync (now added to the script)
 
 use: wget https://raw.githubusercontent.com/[GITHUB-USERNAME]/raspiblitz/[BRANCH]/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh [BRANCH] [GITHUB-USERNAME]
 
@@ -38,7 +38,7 @@ password: raspiblitz
 
 see my output: [sdcard_build_output](sdcard_build_output.html)  
 The only fault appears to be with `fail2ban`
-
+(this is solved if fail2ban is intalled from the DietPi software settings during the second boot)
  
 `ssh admin@[IP-OF-DROIDBLITZ]`  
 password: raspiblitz

README.md

@@ -1,10 +1,15 @@
 [ [Hardware](#hardware-needed-amazon-shopping-list) ] -- [ [Setup](#boot-your-raspiblitz) ] -- [ [Documentation](#documentation) ] -- [ [Development](#further-development-of-raspiblitz) ]
 
 -----
+# DroidBlitz with DietPi
+
+see: [/DietPi/install.md](/DietPi/install.md)
+
+
 # RaspiBlitz
 Fastest and cheapest way to get your own Lightning Node running - on a RaspberryPi with a nice LCD.
 
-`Version 0.98 (1.0 RC1) with lnd 0.5.1 and bitcoin 0.17.0.1 & litecoin 0.16.3.`
+`Version 0.99 (1.0 RC1) with lnd 0.5.1 and bitcoin 0.17.0.1 & litecoin 0.16.3.`
 
 ![RaspiBlitz](pictures/raspiblitz.jpg)
 

build.sdcard/raspbianStretchDesktop.sh

@@ -1,16 +1,14 @@
 #!/bin/bash
 #########################################################################
 # Build your SD card image based on:
-# RASPBIAN STRETCH WITH DESKTOP (2018-11-13)
-# https://www.raspberrypi.org/downloads/raspbian/
-# SHA256: a121652937ccde1c2583fe77d1caec407f2cd248327df2901e4716649ac9bc97
+# DietPi.com
 ##########################################################################
 # setup fresh SD card with image above - login per SSH and run this script: 
 ##########################################################################
 
 echo ""
 echo "*****************************************"
-echo "* RASPIBLITZ SD CARD IMAGE SETUP v0.99  *"
+echo "* DROIDLITZ SD CARD IMAGE SETUP v0.1  *"
 echo "*****************************************"
 echo ""
 
@@ -94,12 +92,17 @@ if [ "${baseImage}" = "dietpi" ]; then
   echo "*** PREPARE DietPi ***"
   echo "renaming dietpi user to pi"
   sudo usermod -l pi dietpi
+  # add pi to the sudo group
   sudo adduser pi sudo
   echo "install pip"
   sudo apt-get update
   sudo apt-get remove -y fail2ban
   sudo apt-get install -y build-essential
   sudo apt-get install -y python-pip
+  # rsync is needed to copy from HDD
+  sudo apt install -y rsync
+  # install ifconfig
+  sudo apt install -y net-tools
 fi
 
 # special prepare when Raspbian
@@ -442,14 +445,16 @@ sudo -u admin cp -r /home/admin/raspiblitz/home.admin/config.scripts /home/admin
 sudo -u admin chmod +x /home/admin/config.scripts/*.sh
 
 
-# prifile path for admin
+# profile path for admin
 sudo bash -c "echo '' >> /home/admin/.profile"
 sudo bash -c "echo 'GOROOT=/usr/local/go' >> /home/admin/.profile"
 sudo bash -c "echo 'PATH=\$PATH:\$GOROOT/bin' >> /home/admin/.profile"
 sudo bash -c "echo 'GOPATH=/usr/local/gocode' >> /home/admin/.profile"
 sudo bash -c "echo 'PATH=\$PATH:\$GOPATH/bin' >> /home/admin/.profile"
+# add /sbin to path for admin
+sudo bash -c "echo 'PATH=\$PATH:\$GOPATH/sbin' >> /home/admin/.profile"
 
-# bash aoutstart for admin
+# bash autostart for admin
 sudo bash -c "echo '# shortcut commands' >> /home/admin/.bashrc"
 sudo bash -c "echo 'source /home/admin/_commands.sh' >> /home/admin/.bashrc"
 sudo bash -c "echo '# automatically start main menu for admin' >> /home/admin/.bashrc"
@@ -537,7 +542,7 @@ echo "Press ENTER to install LCD and reboot ..."
 read key
 
 # give Raspi a default hostname (optional)
-sudo raspi-config nonint do_hostname "RaspiBlitz"
+sudo raspi-config nonint do_hostname "DroidBlitz"
 
 # *** Display selection ***
 dialog --title "Display" --yesno "Are you using the default display available from Amazon?\nSelect 'No' if you are using the Swiss version from play-zone.ch!" 6 80

home.admin/50copyHDD.sh

@@ -12,7 +12,26 @@ if [ ${hddA} -eq 0 ]; then
   echo "Try 'sudo shutdown -r now'"
   exit 1
 fi
-echo "OK - HDD as sda1 found"
+
+ready=0
+while [ ${ready} -eq 0 ]
+  do
+    hddA=$(lsblk | grep /mnt/hdd | grep -c sda1)
+    if [ ${hddB} -eq 1 ]; then
+      echo "OK - HDD as sda1 found"
+      ready=1
+    if [ ${hddA} -eq 0 ]; then
+      echo "FAIL - 1st HDD not found as sda1 or sda"
+      echo "Try 'sudo shutdown -r now'"
+      exit 1
+    fi
+    hddB=$(lsblk | grep -c sda)
+    if [ ${hddB} -eq 1 ]; then
+      echo "OK - HDD as sda found"
+      ready=1
+    fi
+  done
+
 echo ""
 echo "*** Copy Blockchain form a second HDD ***"
 echo ""
@@ -34,17 +53,14 @@ echo "then cancel (CTRL+c) and reboot."
 ready=0
 while [ ${ready} -eq 0 ]
   do
-    hddA=$(lsblk | grep /mnt/hdd | grep -c sda1)
-    if [ ${hddA} -eq 0 ]; then
-      echo "FAIL - connection to 1st HDD lost"
-      echo "It seems there was a POWEROUTAGE while connecting the 2nd HDD."
-      echo "Try to avoid this next time by adding extra Power or connect more securely."
-      echo "You need now to reboot with 'sudo shutdown -r now' and then try again."
-      exit 1
-    fi
-    hddB=$(lsblk | grep -c sdb1)
+    hddC=$(lsblk | grep -c sdb1)
     if [ ${hddB} -eq 1 ]; then
-      echo "OK - 2nd HDD found"
+      echo "OK - 2nd HDD found as sdb1"
+      ready=1
+    fi
+    hddD=$(lsblk | grep -c sdb)
+    if [ ${hddB} -eq 1 ]; then
+      echo "OK - 2nd HDD found as sdb"
       ready=1
     fi
   done
@@ -52,16 +68,28 @@ while [ ${ready} -eq 0 ]
 echo ""
 echo "*** Mounting 2nd HDD ***"
 sudo mkdir /mnt/genesis
-echo "try ext4 .."
+echo "try ext4 on sdb1 .."
 sudo mount -t ext4 /dev/sdb1 /mnt/genesis
 sleep 2
 mountOK=$(lsblk | grep -c /mnt/genesis)
 if [ ${mountOK} -eq 0 ]; then
-  echo "try exfat .."
+  echo "try exfat on sdb1 .."
   sudo mount -t exfat /dev/sdb1 /mnt/genesis
   sleep 2
 fi
 mountOK=$(lsblk | grep -c /mnt/genesis)
+if [ ${mountOK} -eq 0 ]; then
+  echo "try ext4 on sdb .."
+  sudo mount -t ext4 /dev/sdb /mnt/genesis
+  sleep 2
+fi
+mountOK=$(lsblk | grep -c /mnt/genesis)
+if [ ${mountOK} -eq 0 ]; then
+  echo "try exfat on sdb.."
+  sudo mount -t exfat /dev/sdb /mnt/genesis
+  sleep 2
+fi
+mountOK=$(lsblk | grep -c /mnt/genesis)
 if [ ${mountOK} -eq 0 ]; then
   echo "FAIL - not able to mount the 2nd HDD"
   echo "only ext4 and exfat possible"

home.admin/70initLND.sh

@@ -75,7 +75,7 @@ echo ""
 
 ###### Start LND
 echo "*** Starting LND ***"
-lndRunning=$(systemctl status lnd.service 2>/dev/null | grep -c running)
+lndRunning=$(sudo systemctl status lnd.service 2>/dev/null | grep -c running)
 if [ ${lndRunning} -eq 0 ]; then
   sed -i "5s/.*/Wants=${network}d.service/" ./assets/lnd.service
   sed -i "6s/.*/After=${network}d.service/" ./assets/lnd.service
@@ -91,7 +91,7 @@ fi
 lndRunning=0
 while [ ${lndRunning} -eq 0 ]
 do
-  lndRunning=$(systemctl status lnd.service | grep -c running)
+  lndRunning=$(sudo systemctl status lnd.service | grep -c running)
   if [ ${lndRunning} -eq 0 ]; then
     date +%s
     echo "LND not ready yet ... waiting another 60 seconds."