doc: Remove ... from release notes

da233db Bump man pages (MarcoFalke)
3882c05 [qt] Bump BLOCK_CHAIN_SIZE (MarcoFalke)
7a26a34 Bump nMinimumChainWork (MarcoFalke)
20817ce Bump version to 0.13.2 (MarcoFalke)

.github/ISSUE_TEMPLATE.md

@@ -1,21 +0,0 @@
-<!-- This issue tracker is only for technical issues related to Bitcoin Core.
-
-General bitcoin questions and/or support requests are best directed to the Bitcoin StackExchange at https://bitcoin.stackexchange.com.
-
-For reporting security issues, please read instructions at https://bitcoincore.org/en/contact/.
-
-If the node is "stuck" during sync or giving "block checksum mismatch" errors, please ensure your hardware is stable by running memtest and observe CPU temperature with a load-test tool such as linpack before creating an issue! -->
-
-<!-- Describe the issue -->
-<!--- What behavior did you expect? -->
-
-<!--- What was the actual behavior (provide screenshots if the issue is GUI-related)? -->
-
-<!--- How reliably can you reproduce the issue, what are the steps to do so? -->
-
-<!-- What version of Bitcoin Core are you using, where did you get it (website, self-compiled, etc)? -->
-
-<!-- What type of machine are you observing the error on (OS/CPU and disk type)? -->
-
-<!-- Any extra information that might be useful in the debugging process. -->
-<!--- This is normally the contents of a `debug.log` or `config.log` file. Raw text or a link to a pastebin type site are preferred. -->

.gitignore

@@ -6,7 +6,6 @@ src/bitcoind
 src/bitcoin-cli
 src/bitcoin-tx
 src/test/test_bitcoin
-src/test/test_bitcoin_fuzzy
 src/qt/test/test_bitcoin-qt
 
 # autoreconf
@@ -44,12 +43,6 @@ src/qt/forms/ui_*.h
 
 src/qt/test/moc*.cpp
 
-src/qt/bitcoin-qt.config
-src/qt/bitcoin-qt.creator
-src/qt/bitcoin-qt.creator.user
-src/qt/bitcoin-qt.files
-src/qt/bitcoin-qt.includes
-
 .deps
 .dirstamp
 .libs
@@ -62,6 +55,7 @@ src/qt/bitcoin-qt.includes
 *.o
 *.o-*
 *.patch
+.bitcoin
 *.a
 *.pb.cc
 *.pb.h
@@ -82,11 +76,11 @@ src/qt/bitcoin-qt.includes
 Makefile
 bitcoin-qt
 Bitcoin-Qt.app
-background.tiff*
 
 # Unit-tests
 Makefile.test
 bitcoin-qt_test
+src/test/buildenv.py
 
 # Resources cpp
 qrc_*.cpp
@@ -107,8 +101,13 @@ coverage_percent.txt
 linux-coverage-build
 linux-build
 win32-build
-test/config.ini
-test/cache/*
+qa/pull-tester/run-bitcoind-for-test.sh
+qa/pull-tester/tests_config.py
+qa/pull-tester/cache/*
+qa/pull-tester/test.*/*
+qa/tmp
+cache/
+share/BitcoindComparisonTool.jar
 
 !src/leveldb*/Makefile
 

.travis.yml

@@ -1,164 +1,73 @@
+sudo: required
 dist: trusty
+
+#workaround for https://github.com/travis-ci/travis-ci/issues/5227
+addons:
+  hostname: bitcoin-tester
+
 os: linux
-language: minimal
+language: generic
 cache:
-  ccache: true
   directories:
   - depends/built
   - depends/sdk-sources
   - $HOME/.ccache
-stages:
-  - lint
-  - test
 env:
   global:
     - MAKEJOBS=-j3
     - RUN_TESTS=false
-    - RUN_BENCH=false  # Set to true for any one job that has debug enabled, to quickly check bench is not crashing or hitting assertions
-    - DOCKER_NAME_TAG=ubuntu:18.04
-    - LC_ALL=C.UTF-8
+    - CHECK_DOC=0
     - BOOST_TEST_RANDOM=1$TRAVIS_BUILD_ID
     - CCACHE_SIZE=100M
     - CCACHE_TEMPDIR=/tmp/.ccache-temp
     - CCACHE_COMPRESS=1
-    - CCACHE_DIR=$HOME/.ccache
     - BASE_OUTDIR=$TRAVIS_BUILD_DIR/out
     - SDK_URL=https://bitcoincore.org/depends-sources/sdks
+    - PYTHON_DEBUG=1
     - WINEDEBUG=fixme-all
-    - DOCKER_PACKAGES="build-essential libtool autotools-dev automake pkg-config bsdmainutils curl git ca-certificates ccache"
+  matrix:
+# ARM
+    - HOST=arm-linux-gnueabihf PACKAGES="g++-arm-linux-gnueabihf" DEP_OPTS="NO_QT=1" CHECK_DOC=1 GOAL="install" BITCOIN_CONFIG="--enable-glibc-back-compat --enable-reduce-exports"
+# Win32
+    - HOST=i686-w64-mingw32 DPKG_ADD_ARCH="i386" DEP_OPTS="NO_QT=1" PACKAGES="python3 nsis g++-mingw-w64-i686 wine1.6 bc openjdk-7-jre-headless" RUN_TESTS=true GOAL="install" BITCOIN_CONFIG="--enable-reduce-exports"
+# 32-bit + dash
+    - HOST=i686-pc-linux-gnu PACKAGES="g++-multilib bc python3-zmq openjdk-7-jre-headless" DEP_OPTS="NO_QT=1" RUN_TESTS=true GOAL="install" BITCOIN_CONFIG="--enable-zmq --enable-glibc-back-compat --enable-reduce-exports LDFLAGS=-static-libstdc++" USE_SHELL="/bin/dash"
+# Win64
+    - HOST=x86_64-w64-mingw32 DPKG_ADD_ARCH="i386" DEP_OPTS="NO_QT=1" PACKAGES="python3 nsis g++-mingw-w64-x86-64 wine1.6 bc openjdk-7-jre-headless" RUN_TESTS=true GOAL="install" BITCOIN_CONFIG="--enable-reduce-exports"
+# bitcoind
+    - HOST=x86_64-unknown-linux-gnu PACKAGES="bc python3-zmq openjdk-7-jre-headless" DEP_OPTS="NO_QT=1 NO_UPNP=1 DEBUG=1" RUN_TESTS=true GOAL="install" BITCOIN_CONFIG="--enable-zmq --enable-glibc-back-compat --enable-reduce-exports CPPFLAGS=-DDEBUG_LOCKORDER"
+# No wallet
+    - HOST=x86_64-unknown-linux-gnu PACKAGES=" openjdk-7-jre-headless python3" DEP_OPTS="NO_WALLET=1" RUN_TESTS=true GOAL="install" BITCOIN_CONFIG="--enable-glibc-back-compat --enable-reduce-exports"
+# Cross-Mac
+    - HOST=x86_64-apple-darwin11 PACKAGES="cmake imagemagick libcap-dev librsvg2-bin libz-dev libbz2-dev libtiff-tools python-dev" BITCOIN_CONFIG="--enable-reduce-exports" OSX_SDK=10.11 GOAL="deploy"
+
 before_install:
     - export PATH=$(echo $PATH | tr ':' "\n" | sed '/\/opt\/python/d' | tr "\n" ":" | sed "s|::|:|g")
-    - BEGIN_FOLD () { echo ""; CURRENT_FOLD_NAME=$1; echo "travis_fold:start:${CURRENT_FOLD_NAME}"; }
-    - END_FOLD () { RET=$?; echo "travis_fold:end:${CURRENT_FOLD_NAME}"; return $RET; }
 install:
-    - travis_retry docker pull $DOCKER_NAME_TAG
-    - env | grep -E '^(CCACHE_|WINEDEBUG|LC_ALL|BOOST_TEST_RANDOM|CONFIG_SHELL)' | tee /tmp/env
-    - if [[ $HOST = *-mingw32 ]]; then DOCKER_ADMIN="--cap-add SYS_ADMIN"; fi
-    - DOCKER_ID=$(docker run $DOCKER_ADMIN -idt --mount type=bind,src=$TRAVIS_BUILD_DIR,dst=$TRAVIS_BUILD_DIR --mount type=bind,src=$CCACHE_DIR,dst=$CCACHE_DIR -w $TRAVIS_BUILD_DIR --env-file /tmp/env $DOCKER_NAME_TAG)
-    - DOCKER_EXEC () { docker exec $DOCKER_ID bash -c "cd $PWD && $*"; }
-    - if [ -n "$DPKG_ADD_ARCH" ]; then DOCKER_EXEC dpkg --add-architecture "$DPKG_ADD_ARCH" ; fi
-    - travis_retry DOCKER_EXEC apt-get update
-    - travis_retry DOCKER_EXEC apt-get install --no-install-recommends --no-upgrade -qq $PACKAGES $DOCKER_PACKAGES
+    - if [ -n "$PPA" ]; then travis_retry sudo add-apt-repository "$PPA" -y; fi
+    - if [ -n "$DPKG_ADD_ARCH" ]; then sudo dpkg --add-architecture "$DPKG_ADD_ARCH" ; fi
+    - if [ -n "$PACKAGES" ]; then travis_retry sudo apt-get update; fi
+    - if [ -n "$PACKAGES" ]; then travis_retry sudo apt-get install --no-install-recommends --no-upgrade -qq $PACKAGES; fi
 before_script:
-    - DOCKER_EXEC echo \> \$HOME/.bitcoin  # Make sure default datadir does not exist and is never read by creating a dummy file
+    - unset CC; unset CXX
+    - if [ "$CHECK_DOC" = 1 ]; then contrib/devtools/check-doc.py; fi
     - mkdir -p depends/SDKs depends/sdk-sources
     - if [ -n "$OSX_SDK" -a ! -f depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz ]; then curl --location --fail $SDK_URL/MacOSX${OSX_SDK}.sdk.tar.gz -o depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz; fi
     - if [ -n "$OSX_SDK" -a -f depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz ]; then tar -C depends/SDKs -xf depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz; fi
-    - if [[ $HOST = *-mingw32 ]]; then DOCKER_EXEC update-alternatives --set $HOST-g++ \$\(which $HOST-g++-posix\); fi
-    - if [ -z "$NO_DEPENDS" ]; then DOCKER_EXEC CONFIG_SHELL= make $MAKEJOBS -C depends HOST=$HOST $DEP_OPTS; fi
+    - make $MAKEJOBS -C depends HOST=$HOST $DEP_OPTS
 script:
     - export TRAVIS_COMMIT_LOG=`git log --format=fuller -1`
+    - if [ -n "$USE_SHELL" ]; then export CONFIG_SHELL="$USE_SHELL"; fi
     - OUTDIR=$BASE_OUTDIR/$TRAVIS_PULL_REQUEST/$TRAVIS_JOB_NUMBER-$HOST
     - BITCOIN_CONFIG_ALL="--disable-dependency-tracking --prefix=$TRAVIS_BUILD_DIR/depends/$HOST --bindir=$OUTDIR/bin --libdir=$OUTDIR/lib"
-    - if [ -z "$NO_DEPENDS" ]; then DOCKER_EXEC ccache --max-size=$CCACHE_SIZE; fi
-    - BEGIN_FOLD autogen; test -n "$CONFIG_SHELL" && DOCKER_EXEC "$CONFIG_SHELL" -c "./autogen.sh" || DOCKER_EXEC ./autogen.sh; END_FOLD
+    - depends/$HOST/native/bin/ccache --max-size=$CCACHE_SIZE
+    - test -n "$USE_SHELL" && eval '"$USE_SHELL" -c "./autogen.sh"' || ./autogen.sh
     - mkdir build && cd build
-    - BEGIN_FOLD configure; DOCKER_EXEC ../configure --cache-file=config.cache $BITCOIN_CONFIG_ALL $BITCOIN_CONFIG || ( cat config.log && false); END_FOLD
-    - BEGIN_FOLD distdir; DOCKER_EXEC make distdir VERSION=$HOST; END_FOLD
-    - cd bitcoin-$HOST
-    - BEGIN_FOLD configure; DOCKER_EXEC ./configure --cache-file=../config.cache $BITCOIN_CONFIG_ALL $BITCOIN_CONFIG || ( cat config.log && false); END_FOLD
-    - BEGIN_FOLD build; DOCKER_EXEC make $MAKEJOBS $GOAL || ( echo "Build failure. Verbose build follows." && DOCKER_EXEC make $GOAL V=1 ; false ); END_FOLD
-    - if [ "$RUN_TESTS" = "true" ]; then BEGIN_FOLD unit-tests; DOCKER_EXEC LD_LIBRARY_PATH=$TRAVIS_BUILD_DIR/depends/$HOST/lib make $MAKEJOBS check VERBOSE=1; END_FOLD; fi
-    - if [ "$RUN_BENCH" = "true" ]; then BEGIN_FOLD bench; DOCKER_EXEC LD_LIBRARY_PATH=$TRAVIS_BUILD_DIR/depends/$HOST/lib $OUTDIR/bin/bench_bitcoin -scaling=0.001 ; END_FOLD; fi
-    - if [ "$TRAVIS_EVENT_TYPE" = "cron" ]; then extended="--extended --exclude feature_pruning,feature_dbcrash"; fi
-    - if [ "$RUN_TESTS" = "true" ]; then BEGIN_FOLD functional-tests; DOCKER_EXEC test/functional/test_runner.py --combinedlogslen=4000 --coverage --quiet --failfast ${extended}; END_FOLD; fi
+    - ../configure $BITCOIN_CONFIG_ALL $BITCOIN_CONFIG || ( cat config.log && false)
+    - make $MAKEJOBS $GOAL || ( echo "Build failure. Verbose build follows." && make $GOAL V=1 ; false )
+    - export LD_LIBRARY_PATH=$TRAVIS_BUILD_DIR/depends/$HOST/lib
+    - if [ "$RUN_TESTS" = "true" ]; then make $MAKEJOBS check VERBOSE=1; fi
+    - if [ "$RUN_TESTS" = "true" ]; then qa/pull-tester/rpc-tests.py --coverage; fi
 after_script:
     - echo $TRAVIS_COMMIT_RANGE
     - echo $TRAVIS_COMMIT_LOG
-jobs:
-  include:
-# ARM
-    - stage: test
-      env: >-
-        HOST=arm-linux-gnueabihf
-        PACKAGES="g++-arm-linux-gnueabihf"
-        DEP_OPTS="NO_QT=1"
-        GOAL="install"
-        BITCOIN_CONFIG="--enable-glibc-back-compat --enable-reduce-exports"
-# Win32
-    - stage: test
-      env: >-
-        HOST=i686-w64-mingw32
-        DPKG_ADD_ARCH="i386"
-        DEP_OPTS="NO_QT=1"
-        PACKAGES="python3 nsis g++-mingw-w64-i686 wine-binfmt wine32"
-        RUN_TESTS=true
-        GOAL="install"
-        BITCOIN_CONFIG="--enable-reduce-exports"
-# Win64
-    - stage: test
-      env: >-
-        HOST=x86_64-w64-mingw32
-        DEP_OPTS="NO_QT=1"
-        PACKAGES="python3 nsis g++-mingw-w64-x86-64 wine-binfmt wine64"
-        RUN_TESTS=true
-        GOAL="install"
-        BITCOIN_CONFIG="--enable-reduce-exports"
-# 32-bit + dash
-    - stage: test
-      env: >-
-        HOST=i686-pc-linux-gnu
-        PACKAGES="g++-multilib python3-zmq"
-        DEP_OPTS="NO_QT=1"
-        RUN_TESTS=true
-        GOAL="install"
-        BITCOIN_CONFIG="--enable-zmq --enable-glibc-back-compat --enable-reduce-exports LDFLAGS=-static-libstdc++"
-        CONFIG_SHELL="/bin/dash"
-# x86_64 Linux (uses qt5 dev package instead of depends Qt to speed up build and avoid timeout)
-    - stage: test
-      env: >-
-        HOST=x86_64-unknown-linux-gnu
-        PACKAGES="python3-zmq qtbase5-dev qttools5-dev-tools protobuf-compiler libdbus-1-dev libharfbuzz-dev libprotobuf-dev"
-        DEP_OPTS="NO_QT=1 NO_UPNP=1 DEBUG=1 ALLOW_HOST_PACKAGES=1"
-        RUN_TESTS=true
-        RUN_BENCH=true
-        GOAL="install"
-        BITCOIN_CONFIG="--enable-zmq --with-gui=qt5 --enable-glibc-back-compat --enable-reduce-exports --enable-debug CXXFLAGS=\"-g0 -O2\""
-# x86_64 Linux (Qt5 & system libs)
-    - stage: test
-      env: >-
-        HOST=x86_64-unknown-linux-gnu
-        PACKAGES="python3-zmq qtbase5-dev qttools5-dev-tools libssl1.0-dev libevent-dev bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-test-dev libboost-thread-dev libdb5.3++-dev libminiupnpc-dev libzmq3-dev libprotobuf-dev protobuf-compiler libqrencode-dev"
-        NO_DEPENDS=1
-        RUN_TESTS=true
-        GOAL="install"
-        BITCOIN_CONFIG="--enable-zmq --with-incompatible-bdb --enable-glibc-back-compat --enable-reduce-exports --with-gui=qt5 CPPFLAGS=-DDEBUG_LOCKORDER"
-# x86_64 Linux, No wallet
-    - stage: test
-      env: >-
-        HOST=x86_64-unknown-linux-gnu
-        PACKAGES="python3"
-        DEP_OPTS="NO_WALLET=1"
-        RUN_TESTS=true
-        GOAL="install"
-        BITCOIN_CONFIG="--enable-glibc-back-compat --enable-reduce-exports"
-# Cross-Mac
-    - stage: test
-      env: >-
-        HOST=x86_64-apple-darwin14
-        PACKAGES="cmake imagemagick libcap-dev librsvg2-bin libz-dev libbz2-dev libtiff-tools python-dev python3-setuptools-git"
-        OSX_SDK=10.11
-        GOAL="all deploy"
-        BITCOIN_CONFIG="--enable-gui --enable-reduce-exports --enable-werror"
-    - stage: lint
-      env:
-      cache: false
-      language: python
-      python: '3.6'
-      install:
-        - travis_retry pip install flake8==3.5.0
-      before_script:
-        - git fetch --unshallow
-      script:
-        - if [ "$TRAVIS_EVENT_TYPE" = "pull_request" ]; then test/lint/commit-script-check.sh $TRAVIS_COMMIT_RANGE; fi
-        - test/lint/git-subtree-check.sh src/crypto/ctaes
-        - test/lint/git-subtree-check.sh src/secp256k1
-        - test/lint/git-subtree-check.sh src/univalue
-        - test/lint/git-subtree-check.sh src/leveldb
-        - test/lint/check-doc.py
-        - test/lint/check-rpc-mappings.py .
-        - test/lint/lint-all.sh
-        - if [ "$TRAVIS_REPO_SLUG" = "bitcoin/bitcoin" -a "$TRAVIS_EVENT_TYPE" = "cron" ]; then
-              while read LINE; do travis_retry gpg --keyserver hkp://subset.pool.sks-keyservers.net --recv-keys $LINE; done < contrib/verify-commits/trusted-keys &&
-              travis_wait 50 contrib/verify-commits/verify-commits.py;
-          fi

.tx/config

@@ -1,7 +1,7 @@
 [main]
 host = https://www.transifex.com
 
-[bitcoin.qt-translation-017x]
+[bitcoin.qt-translation-013x]
 file_filter = src/qt/locale/bitcoin_<lang>.ts
 source_file = src/qt/locale/bitcoin_en.ts
 source_lang = en

CONTRIBUTING.md

@@ -1,306 +1,124 @@
 Contributing to Bitcoin Core
 ============================
 
-The Bitcoin Core project operates an open contributor model where anyone is
-welcome to contribute towards development in the form of peer review, testing
-and patches. This document explains the practical process and guidelines for
-contributing.
+The Bitcoin Core project operates an open contributor model where anyone is welcome to contribute towards development in the form of peer review, testing and patches. This document explains the practical process and guidelines for contributing.
 
-Firstly in terms of structure, there is no particular concept of "Core
-developers" in the sense of privileged people. Open source often naturally
-revolves around meritocracy where longer term contributors gain more trust from
-the developer community. However, some hierarchy is necessary for practical
-purposes. As such there are repository "maintainers" who are responsible for
-merging pull requests as well as a "lead maintainer" who is responsible for the
-release cycle, overall merging, moderation and appointment of maintainers.
-
-If you're looking for somewhere to start contributing, check out the
-[good first issue](https://github.com/bitcoin/bitcoin/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+issue%22)
-list.
-
-Communication Channels
-----------------------
-
-Most communication about Bitcoin Core development happens on IRC, in the
-#bitcoin-core-dev channel on Freenode. The easiest way to participate on IRC is
-with the web client, [webchat.freenode.net](https://webchat.freenode.net/). Chat
-history logs can be found
-on [botbot.me](https://botbot.me/freenode/bitcoin-core-dev/).
-
-Discussion about code base improvements happens in GitHub issues and on pull
-requests.
-
-The developer
-[mailing list](https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev)
-should be used to discuss complicated or controversial changes before working on
-a patch set.
+Firstly in terms of structure, there is no particular concept of “Core developers” in the sense of privileged people. Open source often naturally revolves around meritocracy where longer term contributors gain more trust from the developer community. However, some hierarchy is necessary for practical purposes. As such there are repository “maintainers” who are responsible for merging pull requests as well as a “lead maintainer” who is responsible for the release cycle, overall merging, moderation and appointment of maintainers.
 
 
 Contributor Workflow
 --------------------
 
-The codebase is maintained using the "contributor workflow" where everyone
-without exception contributes patch proposals using "pull requests". This
-facilitates social contribution, easy testing and peer review.
+The codebase is maintained using the “contributor workflow” where everyone without exception contributes patch proposals using “pull requests”. This facilitates social contribution, easy testing and peer review.
 
 To contribute a patch, the workflow is as follows:
 
-  1. Fork repository
-  1. Create topic branch
-  1. Commit patches
+  - Fork repository
+  - Create topic branch
+  - Commit patches
 
-The project coding conventions in the [developer notes](doc/developer-notes.md)
-must be adhered to.
+The project coding conventions in the [developer notes](doc/developer-notes.md) must be adhered to.
 
-In general [commits should be atomic](https://en.wikipedia.org/wiki/Atomic_commit#Atomic_commit_convention)
-and diffs should be easy to read. For this reason do not mix any formatting
-fixes or code moves with actual code changes.
+In general [commits should be atomic](https://en.wikipedia.org/wiki/Atomic_commit#Atomic_commit_convention) and diffs should be easy to read. For this reason do not mix any formatting fixes or code moves with actual code changes.
 
-Commit messages should be verbose by default consisting of a short subject line
-(50 chars max), a blank line and detailed explanatory text as separate
-paragraph(s), unless the title alone is self-explanatory (like "Corrected typo
-in init.cpp") in which case a single title line is sufficient. Commit messages should be
-helpful to people reading your code in the future, so explain the reasoning for
-your decisions. Further explanation [here](http://chris.beams.io/posts/git-commit/).
+Commit messages should be verbose by default consisting of a short subject line (50 chars max), a blank line and detailed explanatory text as separate paragraph(s); unless the title alone is self-explanatory (like "Corrected typo in main.cpp") then a single title line is sufficient. Commit messages should be helpful to people reading your code in the future, so explain the reasoning for your decisions. Further explanation [here](http://chris.beams.io/posts/git-commit/).
 
-If a particular commit references another issue, please add the reference. For
-example: `refs #1234` or `fixes #4321`. Using the `fixes` or `closes` keywords
-will cause the corresponding issue to be closed when the pull request is merged.
+If a particular commit references another issue, please add the reference, for example `refs #1234`, or `fixes #4321`. Using the `fixes` or `closes` keywords will cause the corresponding issue to be closed when the pull request is merged.
 
-Please refer to the [Git manual](https://git-scm.com/doc) for more information
-about Git.
+Please refer to the [Git manual](https://git-scm.com/doc) for more information about Git.
 
   - Push changes to your fork
   - Create pull request
 
-The title of the pull request should be prefixed by the component or area that
-the pull request affects. Valid areas as:
-
-  - *Consensus* for changes to consensus critical code
-  - *Docs* for changes to the documentation
-  - *Qt* for changes to bitcoin-qt
-  - *Mining* for changes to the mining code
-  - *Net* or *P2P* for changes to the peer-to-peer network code
-  - *RPC/REST/ZMQ* for changes to the RPC, REST or ZMQ APIs
-  - *Scripts and tools* for changes to the scripts and tools
-  - *Tests* for changes to the bitcoin unit tests or QA tests
-  - *Trivial* should **only** be used for PRs that do not change generated
-    executable code. Notably, refactors (change of function arguments and code
-    reorganization) and changes in behavior should **not** be marked as trivial.
-    Examples of trivial PRs are changes to:
-    - comments
-    - whitespace
-    - variable names
-    - logging and messages
-  - *Utils and libraries* for changes to the utils and libraries
-  - *Wallet* for changes to the wallet code
-
-Examples:
+The title of the pull request should be prefixed by the component or area that the pull request affects. Examples:
 
     Consensus: Add new opcode for BIP-XXXX OP_CHECKAWESOMESIG
     Net: Automatically create hidden service, listen on Tor
     Qt: Add feed bump button
-    Trivial: Fix typo in init.cpp
+    Trivial: Fix typo in main.cpp
 
-Note that translations should not be submitted as pull requests, please see
-[Translation Process](https://github.com/bitcoin/bitcoin/blob/master/doc/translation_process.md) 
-for more information on helping with translations.
+If a pull request is specifically not to be considered for merging (yet) please prefix the title with [WIP] or use [Tasks Lists](https://help.github.com/articles/basic-writing-and-formatting-syntax/#task-lists) in the body of the pull request to indicate tasks are pending.
 
-If a pull request is not to be considered for merging (yet), please
-prefix the title with [WIP] or use [Tasks Lists](https://help.github.com/articles/basic-writing-and-formatting-syntax/#task-lists)
-in the body of the pull request to indicate tasks are pending.
+The body of the pull request should contain enough description about what the patch does together with any justification/reasoning. You should include references to any discussions (for example other tickets or mailing list discussions).
 
-The body of the pull request should contain enough description about what the
-patch does together with any justification/reasoning. You should include
-references to any discussions (for example other tickets or mailing list
-discussions).
-
-At this stage one should expect comments and review from other contributors. You
-can add more commits to your pull request by committing them locally and pushing
-to your fork until you have satisfied all feedback.
-
-Note: Code review is a burdensome but important part of the development process, and as such, certain types of pull requests are rejected. In general, if the **improvements** do not warrant the **review effort** required, the PR has a high chance of being rejected. It is up to the PR author to convince the reviewers that the changes warrant the review effort, and if reviewers are "Concept NAK'ing" the PR, the author may need to present arguments and/or do research backing their suggested changes.
+At this stage one should expect comments and review from other contributors. You can add more commits to your pull request by committing them locally and pushing to your fork until you have satisfied all feedback.
 
 Squashing Commits
 ---------------------------
-If your pull request is accepted for merging, you may be asked by a maintainer
-to squash and or [rebase](https://git-scm.com/docs/git-rebase) your commits
-before it will be merged. The basic squashing workflow is shown below.
+If your pull request is accepted for merging, you may be asked by a maintainer to squash and or [rebase](https://git-scm.com/docs/git-rebase) your commits before it will be merged. The basic squashing workflow is shown below.
 
     git checkout your_branch_name
     git rebase -i HEAD~n
-    # n is normally the number of commits in the pull request.
-    # Set commits (except the one in the first line) from 'pick' to 'squash', save and quit.
-    # On the next screen, edit/refine commit messages.
-    # Save and quit.
+    # n is normally the number of commits in the pull
+    # set commits from 'pick' to 'squash', save and quit
+    # on the next screen, edit/refine commit messages
+    # save and quit
     git push -f # (force push to GitHub)
 
-If you have problems with squashing (or other workflows with `git`), you can
-alternatively enable "Allow edits from maintainers" in the right GitHub
-sidebar and ask for help in the pull request.
-
-Please refrain from creating several pull requests for the same change.
-Use the pull request that is already open (or was created earlier) to amend
-changes. This preserves the discussion and review that happened earlier for
-the respective change set.
-
-The length of time required for peer review is unpredictable and will vary from
-pull request to pull request.
+The length of time required for peer review is unpredictable and will vary from pull request to pull request.
 
 
 Pull Request Philosophy
 -----------------------
 
-Patchsets should always be focused. For example, a pull request could add a
-feature, fix a bug, or refactor code; but not a mixture. Please also avoid super
-pull requests which attempt to do too much, are overly large, or overly complex
-as this makes review difficult.
+Patchsets should always be focused. For example, a pull request could add a feature, fix a bug, or refactor code; but not a mixture. Please also avoid super pull requests which attempt to do too much, are overly large, or overly complex as this makes review difficult.
 
 
-### Features
+###Features
 
-When adding a new feature, thought must be given to the long term technical debt
-and maintenance that feature may require after inclusion. Before proposing a new
-feature that will require maintenance, please consider if you are willing to
-maintain it (including bug fixing). If features get orphaned with no maintainer
-in the future, they may be removed by the Repository Maintainer.
+When adding a new feature, thought must be given to the long term technical debt and maintenance that feature may require after inclusion. Before proposing a new feature that will require maintenance, please consider if you are willing to maintain it (including bug fixing). If features get orphaned with no maintainer in the future, they may be removed by the Repository Maintainer.
 
 
-### Refactoring
+###Refactoring
 
-Refactoring is a necessary part of any software project's evolution. The
-following guidelines cover refactoring pull requests for the project.
+Refactoring is a necessary part of any software project's evolution. The following guidelines cover refactoring pull requests for the project.
 
-There are three categories of refactoring, code only moves, code style fixes,
-code refactoring. In general refactoring pull requests should not mix these
-three kinds of activity in order to make refactoring pull requests easy to
-review and uncontroversial. In all cases, refactoring PRs must not change the
-behaviour of code within the pull request (bugs must be preserved as is).
+There are three categories of refactoring, code only moves, code style fixes, code refactoring. In general refactoring pull requests should not mix these three kinds of activity in order to make refactoring pull requests easy to review and uncontroversial. In all cases, refactoring PRs must not change the behaviour of code within the pull request (bugs must be preserved as is).
 
-Project maintainers aim for a quick turnaround on refactoring pull requests, so
-where possible keep them short, uncomplex and easy to verify.
-
-Pull requests that refactor the code should not be made by new contributors. It
-requires a certain level of experience to know where the code belongs to and to
-understand the full ramification (including rebase effort of open pull requests).
-
-Trivial pull requests or pull requests that refactor the code with no clear
-benefits may be immediately closed by the maintainers to reduce unnecessary
-workload on reviewing.
+Project maintainers aim for a quick turnaround on refactoring pull requests, so where possible keep them short, uncomplex and easy to verify.
 
 
 "Decision Making" Process
 -------------------------
 
-The following applies to code changes to the Bitcoin Core project (and related
-projects such as libsecp256k1), and is not to be confused with overall Bitcoin
-Network Protocol consensus changes.
+The following applies to code changes to the Bitcoin Core project (and related projects such as libsecp256k1), and is not to be confused with overall Bitcoin Network Protocol consensus changes.
 
-Whether a pull request is merged into Bitcoin Core rests with the project merge
-maintainers and ultimately the project lead.
+Whether a pull request is merged into Bitcoin Core rests with the project merge maintainers and ultimately the project lead.
 
-Maintainers will take into consideration if a patch is in line with the general
-principles of the project; meets the minimum standards for inclusion; and will
-judge the general consensus of contributors.
+Maintainers will take into consideration if a patch is in line with the general principles of the project; meets the minimum standards for inclusion; and will judge the general consensus of contributors.
 
 In general, all pull requests must:
 
-  - Have a clear use case, fix a demonstrable bug or serve the greater good of
-    the project (for example refactoring for modularisation);
-  - Be well peer reviewed;
-  - Have unit tests and functional tests where appropriate;
-  - Follow code style guidelines ([C++](doc/developer-notes.md), [functional tests](test/functional/README.md));
-  - Not break the existing test suite;
-  - Where bugs are fixed, where possible, there should be unit tests
-    demonstrating the bug and also proving the fix. This helps prevent regression.
+  - have a clear use case, fix a demonstrable bug or serve the greater good of the project (for example refactoring for modularisation);
+  - be well peer reviewed;
+  - have unit tests and functional tests where appropriate;
+  - follow code style guidelines;
+  - not break the existing test suite;
+  - where bugs are fixed, where possible, there should be unit tests demonstrating the bug and also proving the fix. This helps prevent regression.
 
-Patches that change Bitcoin consensus rules are considerably more involved than
-normal because they affect the entire ecosystem and so must be preceded by
-extensive mailing list discussions and have a numbered BIP. While each case will
-be different, one should be prepared to expend more time and effort than for
-other kinds of patches because of increased peer review and consensus building
-requirements.
+Patches that change Bitcoin consensus rules are considerably more involved than normal because they affect the entire ecosystem and so must be preceded by extensive mailing list discussions and have a numbered BIP. While each case will be different, one should be prepared to expend more time and effort than for other kinds of patches because of increased peer review and consensus building requirements.
 
 
-### Peer Review
+###Peer Review
 
-Anyone may participate in peer review which is expressed by comments in the pull
-request. Typically reviewers will review the code for obvious errors, as well as
-test out the patch set and opine on the technical merits of the patch. Project
-maintainers take into account the peer review when determining if there is
-consensus to merge a pull request (remember that discussions may have been
-spread out over GitHub, mailing list and IRC discussions). The following
-language is used within pull-request comments:
+Anyone may participate in peer review which is expressed by comments in the pull request. Typically reviewers will review the code for obvious errors, as well as test out the patch set and opine on the technical merits of the patch. Project maintainers take into account the peer review when determining if there is consensus to merge a pull request (remember that discussions may have been spread out over github, mailing list and IRC discussions). The following language is used within pull-request comments:
 
   - ACK means "I have tested the code and I agree it should be merged";
-  - NACK means "I disagree this should be merged", and must be accompanied by
-    sound technical justification (or in certain cases of copyright/patent/licensing
-    issues, legal justification). NACKs without accompanying reasoning may be
-    disregarded;
-  - utACK means "I have not tested the code, but I have reviewed it and it looks
-    OK, I agree it can be merged";
+  - NACK means "I disagree this should be merged", and must be accompanied by sound technical justification. NACKs without accompanying reasoning may be disregarded;
+  - utACK means "I have not tested the code, but I have reviewed it and it looks OK, I agree it can be merged";
   - Concept ACK means "I agree in the general principle of this pull request";
   - Nit refers to trivial, often non-blocking issues.
 
 Reviewers should include the commit hash which they reviewed in their comments.
 
-Project maintainers reserve the right to weigh the opinions of peer reviewers
-using common sense judgement and also may weight based on meritocracy: Those
-that have demonstrated a deeper commitment and understanding towards the project
-(over time) or have clear domain expertise may naturally have more weight, as
-one would expect in all walks of life.
+Project maintainers reserve the right to weigh the opinions of peer reviewers using common sense judgement and also may weight based on meritocracy: Those that have demonstrated a deeper commitment and understanding towards the project (over time) or have clear domain expertise may naturally have more weight, as one would expect in all walks of life.
 
-Where a patch set affects consensus critical code, the bar will be set much
-higher in terms of discussion and peer review requirements, keeping in mind that
-mistakes could be very costly to the wider community. This includes refactoring
-of consensus critical code.
+Where a patch set affects consensus critical code, the bar will be set much higher in terms of discussion and peer review requirements, keeping in mind that mistakes could be very costly to the wider community. This includes refactoring of consensus critical code.
 
-Where a patch set proposes to change the Bitcoin consensus, it must have been
-discussed extensively on the mailing list and IRC, be accompanied by a widely
-discussed BIP and have a generally widely perceived technical consensus of being
-a worthwhile change based on the judgement of the maintainers.
-
-### Finding Reviewers
-
-As most reviewers are themselves developers with their own projects, the review
-process can be quite lengthy, and some amount of patience is required. If you find
-that you've been waiting for a pull request to be given attention for several
-months, there may be a number of reasons for this, some of which you can do something
-about:
-
-  - It may be because of a feature freeze due to an upcoming release. During this time,
-    only bug fixes are taken into consideration. If your pull request is a new feature,
-    it will not be prioritized until the release is over. Wait for release.
-  - It may be because the changes you are suggesting do not appeal to people. Rather than
-    nits and critique, which require effort and means they care enough to spend time on your
-    contribution, thundering silence is a good sign of widespread (mild) dislike of a given change
-    (because people don't assume *others* won't actually like the proposal). Don't take
-    that personally, though! Instead, take another critical look at what you are suggesting
-    and see if it: changes too much, is too broad, doesn't adhere to the
-    [developer notes](doc/developer-notes.md), is dangerous or insecure, is messily written, etc.
-    Identify and address any of the issues you find. Then ask e.g. on IRC if someone could give
-    their opinion on the concept itself.
-  - It may be because your code is too complex for all but a few people. And those people
-    may not have realized your pull request even exists. A great way to find people who
-    are qualified and care about the code you are touching is the
-    [Git Blame feature](https://help.github.com/articles/tracing-changes-in-a-file/). Simply
-    find the person touching the code you are touching before you and see if you can find
-    them and give them a nudge. Don't be incessant about the nudging though.
-  - Finally, if all else fails, ask on IRC or elsewhere for someone to give your pull request
-    a look. If you think you've been waiting an unreasonably long amount of time (month+) for
-    no particular reason (few lines changed, etc), this is totally fine. Try to return the favor
-    when someone else is asking for feedback on their code, and universe balances out.
+Where a patch set proposes to change the Bitcoin consensus, it must have been discussed extensively on the mailing list and IRC, be accompanied by a widely discussed BIP and have a generally widely perceived technical consensus of being a worthwhile change based on the judgement of the maintainers.
 
 
 Release Policy
 --------------
 
 The project leader is the release manager for each Bitcoin Core release.
-
-Copyright
----------
-
-By contributing to this repository, you agree to license your work under the 
-MIT license unless specified otherwise in `contrib/debian/copyright` or at 
-the top of the file itself. Any work contributed where you are not the original 
-author must contain its license header with the original author(s) and source.

COPYING

@@ -1,7 +1,6 @@
 The MIT License (MIT)
 
-Copyright (c) 2009-2018 The Bitcoin Core developers
-Copyright (c) 2009-2018 Bitcoin Developers
+Copyright (c) 2009-2016 The Bitcoin Core developers
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

Makefile.am

@@ -4,11 +4,9 @@
 
 ACLOCAL_AMFLAGS = -I build-aux/m4
 SUBDIRS = src
-if ENABLE_MAN
-SUBDIRS += doc/man
-endif
 .PHONY: deploy FORCE
 
+GZIP_ENV="-9n"
 export PYTHONPATH
 
 if BUILD_BITCOIN_LIBS
@@ -19,7 +17,6 @@ endif
 BITCOIND_BIN=$(top_builddir)/src/$(BITCOIN_DAEMON_NAME)$(EXEEXT)
 BITCOIN_QT_BIN=$(top_builddir)/src/qt/$(BITCOIN_GUI_NAME)$(EXEEXT)
 BITCOIN_CLI_BIN=$(top_builddir)/src/$(BITCOIN_CLI_NAME)$(EXEEXT)
-BITCOIN_TX_BIN=$(top_builddir)/src/$(BITCOIN_TX_NAME)$(EXEEXT)
 BITCOIN_WIN_INSTALLER=$(PACKAGE)-$(PACKAGE_VERSION)-win$(WINDOWS_BITS)-setup$(EXEEXT)
 
 empty :=
@@ -39,14 +36,6 @@ OSX_PLIST=$(top_builddir)/share/qt/Info.plist #not installed
 OSX_QT_TRANSLATIONS = da,de,es,hu,ru,uk,zh_CN,zh_TW
 
 DIST_DOCS = $(wildcard doc/*.md) $(wildcard doc/release-notes/*.md)
-DIST_CONTRIB = $(top_srcdir)/contrib/bitcoin-cli.bash-completion \
-	       $(top_srcdir)/contrib/bitcoin-tx.bash-completion \
-	       $(top_srcdir)/contrib/bitcoind.bash-completion \
-	       $(top_srcdir)/contrib/init \
-	       $(top_srcdir)/contrib/install_db4.sh
-DIST_SHARE = \
-  $(top_srcdir)/share/genbuild.sh \
-  $(top_srcdir)/share/rpcauth
 
 BIN_CHECKS=$(top_srcdir)/contrib/devtools/symbol-check.py \
            $(top_srcdir)/contrib/devtools/security-check.py
@@ -62,10 +51,10 @@ OSX_PACKAGING = $(OSX_DEPLOY_SCRIPT) $(OSX_FANCY_PLIST) $(OSX_INSTALLER_ICONS) \
   $(top_srcdir)/contrib/macdeploy/detached-sig-apply.sh \
   $(top_srcdir)/contrib/macdeploy/detached-sig-create.sh
 
-COVERAGE_INFO = baseline.info \
-  test_bitcoin_filtered.info total_coverage.info \
-  baseline_filtered.info functional_test.info functional_test_filtered.info \
-  test_bitcoin_coverage.info test_bitcoin.info
+COVERAGE_INFO = baseline_filtered_combined.info baseline.info block_test.info \
+  leveldb_baseline.info test_bitcoin_filtered.info total_coverage.info \
+  baseline_filtered.info block_test_filtered.info rpc_test.info rpc_test_filtered.info \
+  leveldb_baseline_filtered.info test_bitcoin_coverage.info test_bitcoin.info
 
 dist-hook:
 	-$(GIT) archive --format=tar HEAD -- src/clientversion.cpp | $(AMTAR) -C $(top_distdir) -xf -
@@ -75,11 +64,13 @@ $(BITCOIN_WIN_INSTALLER): all-recursive
 	STRIPPROG="$(STRIP)" $(INSTALL_STRIP_PROGRAM) $(BITCOIND_BIN) $(top_builddir)/release
 	STRIPPROG="$(STRIP)" $(INSTALL_STRIP_PROGRAM) $(BITCOIN_QT_BIN) $(top_builddir)/release
 	STRIPPROG="$(STRIP)" $(INSTALL_STRIP_PROGRAM) $(BITCOIN_CLI_BIN) $(top_builddir)/release
-	STRIPPROG="$(STRIP)" $(INSTALL_STRIP_PROGRAM) $(BITCOIN_TX_BIN) $(top_builddir)/release
 	@test -f $(MAKENSIS) && $(MAKENSIS) -V2 $(top_builddir)/share/setup.nsi || \
 	  echo error: could not build $@
 	@echo built $@
 
+$(if $(findstring src/,$(MAKECMDGOALS)),$(MAKECMDGOALS), none): FORCE
+	$(MAKE) -C src $(patsubst src/%,%,$@)
+
 $(OSX_APP)/Contents/PkgInfo:
 	$(MKDIR_P) $(@D)
 	@echo "APPL????" > $@
@@ -96,9 +87,9 @@ $(OSX_APP)/Contents/Resources/bitcoin.icns: $(OSX_INSTALLER_ICONS)
 	$(MKDIR_P) $(@D)
 	$(INSTALL_DATA) $< $@
 
-$(OSX_APP)/Contents/MacOS/Bitcoin-Qt: all-recursive
+$(OSX_APP)/Contents/MacOS/Bitcoin-Qt: $(BITCOIN_QT_BIN)
 	$(MKDIR_P) $(@D)
-	STRIPPROG="$(STRIP)" $(INSTALL_STRIP_PROGRAM)  $(BITCOIN_QT_BIN) $@
+	STRIPPROG="$(STRIP)" $(INSTALL_STRIP_PROGRAM)  $< $@
 
 $(OSX_APP)/Contents/Resources/Base.lproj/InfoPlist.strings:
 	$(MKDIR_P) $(@D)
@@ -112,16 +103,9 @@ osx_volname:
 	echo $(OSX_VOLNAME) >$@
 
 if BUILD_DARWIN
-$(OSX_DMG): $(OSX_APP_BUILT) $(OSX_PACKAGING) $(OSX_BACKGROUND_IMAGE)
+$(OSX_DMG): $(OSX_APP_BUILT) $(OSX_PACKAGING)
 	$(PYTHON) $(OSX_DEPLOY_SCRIPT) $(OSX_APP) -add-qt-tr $(OSX_QT_TRANSLATIONS) -translations-dir=$(QT_TRANSLATION_DIR) -dmg -fancy $(OSX_FANCY_PLIST) -verbose 2 -volname $(OSX_VOLNAME)
 
-$(OSX_BACKGROUND_IMAGE).png: contrib/macdeploy/$(OSX_BACKGROUND_SVG)
-	sed 's/PACKAGE_NAME/$(PACKAGE_NAME)/' < "$<" | $(RSVG_CONVERT) -f png -d 36 -p 36 -o $@
-$(OSX_BACKGROUND_IMAGE)@2x.png: contrib/macdeploy/$(OSX_BACKGROUND_SVG)
-	sed 's/PACKAGE_NAME/$(PACKAGE_NAME)/' < "$<" | $(RSVG_CONVERT) -f png -d 72 -p 72 -o $@
-$(OSX_BACKGROUND_IMAGE): $(OSX_BACKGROUND_IMAGE).png $(OSX_BACKGROUND_IMAGE)@2x.png
-	tiffutil -cathidpicheck $^ -out $@
-
 deploydir: $(OSX_DMG)
 else
 APP_DIST_DIR=$(top_builddir)/dist
@@ -169,135 +153,86 @@ $(BITCOIND_BIN): FORCE
 $(BITCOIN_CLI_BIN): FORCE
 	$(MAKE) -C src $(@F)
 
-$(BITCOIN_TX_BIN): FORCE
-	$(MAKE) -C src $(@F)
-
 if USE_LCOV
-LCOV_FILTER_PATTERN=-p "/usr/include/" -p "src/leveldb/" -p "src/bench/" -p "src/univalue" -p "src/crypto/ctaes" -p "src/secp256k1"
 
 baseline.info:
 	$(LCOV) -c -i -d $(abs_builddir)/src -o $@
 
 baseline_filtered.info: baseline.info
-	$(abs_builddir)/contrib/filter-lcov.py $(LCOV_FILTER_PATTERN) $< $@
-	$(LCOV) -a $@ $(LCOV_OPTS) -o $@
+	$(LCOV) -r $< "/usr/include/*" -o $@
 
-test_bitcoin.info: baseline_filtered.info
+leveldb_baseline.info: baseline_filtered.info
+	$(LCOV) -c -i -d $(abs_builddir)/src/leveldb -b $(abs_builddir)/src/leveldb -o $@
+
+leveldb_baseline_filtered.info: leveldb_baseline.info
+	$(LCOV) -r $< "/usr/include/*" -o $@
+
+baseline_filtered_combined.info: leveldb_baseline_filtered.info baseline_filtered.info
+	$(LCOV) -a leveldb_baseline_filtered.info -a baseline_filtered.info -o $@
+
+test_bitcoin.info: baseline_filtered_combined.info
 	$(MAKE) -C src/ check
-	$(LCOV) -c $(LCOV_OPTS) -d $(abs_builddir)/src -t test_bitcoin -o $@
-	$(LCOV) -z $(LCOV_OPTS) -d $(abs_builddir)/src
+	$(LCOV) -c -d $(abs_builddir)/src -t test_bitcoin -o $@
+	$(LCOV) -z -d $(abs_builddir)/src
+	$(LCOV) -z -d $(abs_builddir)/src/leveldb
 
 test_bitcoin_filtered.info: test_bitcoin.info
-	$(abs_builddir)/contrib/filter-lcov.py $(LCOV_FILTER_PATTERN) $< $@
-	$(LCOV) -a $@ $(LCOV_OPTS) -o $@
+	$(LCOV) -r $< "/usr/include/*" -o $@
 
-functional_test.info: test_bitcoin_filtered.info
-	-@TIMEOUT=15 test/functional/test_runner.py $(EXTENDED_FUNCTIONAL_TESTS)
-	$(LCOV) -c $(LCOV_OPTS) -d $(abs_builddir)/src --t functional-tests -o $@
-	$(LCOV) -z $(LCOV_OPTS) -d $(abs_builddir)/src
+block_test.info: test_bitcoin_filtered.info
+	$(MKDIR_P) qa/tmp
+	-@TIMEOUT=15 qa/pull-tester/run-bitcoind-for-test.sh $(JAVA) -jar $(JAVA_COMPARISON_TOOL) qa/tmp/compTool $(COMPARISON_TOOL_REORG_TESTS)
+	$(LCOV) -c -d $(abs_builddir)/src --t BitcoinJBlockTest -o $@
+	$(LCOV) -z -d $(abs_builddir)/src
+	$(LCOV) -z -d $(abs_builddir)/src/leveldb
 
-functional_test_filtered.info: functional_test.info
-	$(abs_builddir)/contrib/filter-lcov.py $(LCOV_FILTER_PATTERN) $< $@
-	$(LCOV) -a $@ $(LCOV_OPTS) -o $@
+block_test_filtered.info: block_test.info
+	$(LCOV) -r $< "/usr/include/*" -o $@
 
-test_bitcoin_coverage.info: baseline_filtered.info test_bitcoin_filtered.info
-	$(LCOV) -a $(LCOV_OPTS) baseline_filtered.info -a test_bitcoin_filtered.info -o $@
+rpc_test.info: test_bitcoin_filtered.info
+	-@TIMEOUT=15 python qa/pull-tester/rpc-tests.py $(EXTENDED_RPC_TESTS)
+	$(LCOV) -c -d $(abs_builddir)/src --t rpc-tests -o $@
+	$(LCOV) -z -d $(abs_builddir)/src
+	$(LCOV) -z -d $(abs_builddir)/src/leveldb
 
-total_coverage.info: test_bitcoin_filtered.info functional_test_filtered.info
-	$(LCOV) -a $(LCOV_OPTS) baseline_filtered.info -a test_bitcoin_filtered.info -a functional_test_filtered.info -o $@ | $(GREP) "\%" | $(AWK) '{ print substr($$3,2,50) "/" $$5 }' > coverage_percent.txt
+rpc_test_filtered.info: rpc_test.info
+	$(LCOV) -r $< "/usr/include/*" -o $@
+
+test_bitcoin_coverage.info: baseline_filtered_combined.info test_bitcoin_filtered.info
+	$(LCOV) -a baseline_filtered.info -a leveldb_baseline_filtered.info -a test_bitcoin_filtered.info -o $@
+
+total_coverage.info: baseline_filtered_combined.info test_bitcoin_filtered.info block_test_filtered.info rpc_test_filtered.info
+	$(LCOV) -a baseline_filtered.info -a leveldb_baseline_filtered.info -a test_bitcoin_filtered.info -a block_test_filtered.info -a rpc_test_filtered.info -o $@ | $(GREP) "\%" | $(AWK) '{ print substr($$3,2,50) "/" $$5 }' > coverage_percent.txt
 
 test_bitcoin.coverage/.dirstamp:  test_bitcoin_coverage.info
-	$(GENHTML) -s $(LCOV_OPTS) $< -o $(@D)
+	$(GENHTML) -s $< -o $(@D)
 	@touch $@
 
 total.coverage/.dirstamp: total_coverage.info
-	$(GENHTML) -s $(LCOV_OPTS) $< -o $(@D)
+	$(GENHTML) -s $< -o $(@D)
 	@touch $@
 
 cov: test_bitcoin.coverage/.dirstamp total.coverage/.dirstamp
 
 endif
 
+if USE_COMPARISON_TOOL
+check-local:
+	$(MKDIR_P) qa/tmp
+	@qa/pull-tester/run-bitcoind-for-test.sh $(JAVA) -jar $(JAVA_COMPARISON_TOOL) qa/tmp/compTool $(COMPARISON_TOOL_REORG_TESTS) 2>&1
+endif
+
 dist_noinst_SCRIPTS = autogen.sh
 
-EXTRA_DIST = $(DIST_SHARE) test/functional/test_runner.py test/functional $(DIST_CONTRIB) $(DIST_DOCS) $(WINDOWS_PACKAGING) $(OSX_PACKAGING) $(BIN_CHECKS)
-
-EXTRA_DIST += \
-    test/util/bitcoin-util-test.py \
-    test/util/data/bitcoin-util-test.json \
-    test/util/data/blanktxv1.hex \
-    test/util/data/blanktxv1.json \
-    test/util/data/blanktxv2.hex \
-    test/util/data/blanktxv2.json \
-    test/util/data/tt-delin1-out.hex \
-    test/util/data/tt-delin1-out.json \
-    test/util/data/tt-delout1-out.hex \
-    test/util/data/tt-delout1-out.json \
-    test/util/data/tt-locktime317000-out.hex \
-    test/util/data/tt-locktime317000-out.json \
-    test/util/data/tx394b54bb.hex \
-    test/util/data/txcreate1.hex \
-    test/util/data/txcreate1.json \
-    test/util/data/txcreate2.hex \
-    test/util/data/txcreate2.json \
-    test/util/data/txcreatedata1.hex \
-    test/util/data/txcreatedata1.json \
-    test/util/data/txcreatedata2.hex \
-    test/util/data/txcreatedata2.json \
-    test/util/data/txcreatedata_seq0.hex \
-    test/util/data/txcreatedata_seq0.json \
-    test/util/data/txcreatedata_seq1.hex \
-    test/util/data/txcreatedata_seq1.json \
-    test/util/data/txcreatemultisig1.hex \
-    test/util/data/txcreatemultisig1.json \
-    test/util/data/txcreatemultisig2.hex \
-    test/util/data/txcreatemultisig2.json \
-    test/util/data/txcreatemultisig3.hex \
-    test/util/data/txcreatemultisig3.json \
-    test/util/data/txcreatemultisig4.hex \
-    test/util/data/txcreatemultisig4.json \
-    test/util/data/txcreatemultisig5.json \
-    test/util/data/txcreateoutpubkey1.hex \
-    test/util/data/txcreateoutpubkey1.json \
-    test/util/data/txcreateoutpubkey2.hex \
-    test/util/data/txcreateoutpubkey2.json \
-    test/util/data/txcreateoutpubkey3.hex \
-    test/util/data/txcreateoutpubkey3.json \
-    test/util/data/txcreatescript1.hex \
-    test/util/data/txcreatescript1.json \
-    test/util/data/txcreatescript2.hex \
-    test/util/data/txcreatescript2.json \
-    test/util/data/txcreatescript3.hex \
-    test/util/data/txcreatescript3.json \
-    test/util/data/txcreatescript4.hex \
-    test/util/data/txcreatescript4.json \
-    test/util/data/txcreatesignv1.hex \
-    test/util/data/txcreatesignv1.json \
-    test/util/data/txcreatesignv2.hex \
-    test/util/rpcauth-test.py
+EXTRA_DIST = $(top_srcdir)/share/genbuild.sh qa/pull-tester/rpc-tests.py qa/rpc-tests $(DIST_DOCS) $(WINDOWS_PACKAGING) $(OSX_PACKAGING) $(BIN_CHECKS)
 
 CLEANFILES = $(OSX_DMG) $(BITCOIN_WIN_INSTALLER)
 
+# This file is problematic for out-of-tree builds if it exists.
+DISTCLEANFILES = qa/pull-tester/tests_config.pyc
+
 .INTERMEDIATE: $(COVERAGE_INFO)
 
-DISTCHECK_CONFIGURE_FLAGS = --enable-man
-
-doc/doxygen/.stamp: doc/Doxyfile FORCE
-	$(MKDIR_P) $(@D)
-	$(DOXYGEN) $^
-	$(AM_V_at) touch $@
-
-if HAVE_DOXYGEN
-docs: doc/doxygen/.stamp
-else
-docs:
-	@echo "error: doxygen not found"
-endif
-
-clean-docs:
-	rm -rf doc/doxygen
-
-clean-local: clean-docs
-	rm -rf coverage_percent.txt test_bitcoin.coverage/ total.coverage/ test/tmp/ cache/ $(OSX_APP)
-	rm -rf test/functional/__pycache__ test/functional/test_framework/__pycache__ test/cache
-
+clean-local:
+	rm -rf coverage_percent.txt test_bitcoin.coverage/ total.coverage/ qa/tmp/ cache/ $(OSX_APP)
+	rm -rf qa/pull-tester/__pycache__

README.md

@@ -15,7 +15,7 @@ out collectively by the network. Bitcoin Core is the name of open source
 software which enables the use of this currency.
 
 For more information, as well as an immediately useable, binary version of
-the Bitcoin Core software, see https://bitcoincore.org/en/download/, or read the
+the Bitcoin Core software, see https://bitcoin.org/en/download, or read the
 [original whitepaper](https://bitcoincore.org/bitcoin.pdf).
 
 License
@@ -33,6 +33,12 @@ regularly to indicate new official, stable release versions of Bitcoin Core.
 
 The contribution workflow is described in [CONTRIBUTING.md](CONTRIBUTING.md).
 
+The developer [mailing list](https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev)
+should be used to discuss complicated or controversial changes before working
+on a patch set.
+
+Developer IRC can be found on Freenode at #bitcoin-core-dev.
+
 Testing
 -------
 
@@ -43,16 +49,15 @@ lots of money.
 
 ### Automated Testing
 
-Developers are strongly encouraged to write [unit tests](src/test/README.md) for new code, and to
+Developers are strongly encouraged to write [unit tests](/doc/unit-tests.md) for new code, and to
 submit new unit tests for old code. Unit tests can be compiled and run
-(assuming they weren't disabled in configure) with: `make check`. Further details on running
-and extending unit tests can be found in [/src/test/README.md](/src/test/README.md).
+(assuming they weren't disabled in configure) with: `make check`
 
-There are also [regression and integration tests](/test), written
+There are also [regression and integration tests](/qa) of the RPC interface, written
 in Python, that are run automatically on the build server.
-These tests can be run (if the [test dependencies](/test) are installed) with: `test/functional/test_runner.py`
+These tests can be run (if the [test dependencies](/qa) are installed) with: `qa/pull-tester/rpc-tests.py`
 
-The Travis CI system makes sure that every pull request is built for Windows, Linux, and macOS, and that unit/sanity tests are run automatically.
+The Travis CI system makes sure that every pull request is built for Windows, Linux, and OS X, and that unit/sanity tests are run automatically.
 
 ### Manual Quality Assurance (QA) Testing
 

autogen.sh

@@ -3,7 +3,6 @@
 # Distributed under the MIT software license, see the accompanying
 # file COPYING or http://www.opensource.org/licenses/mit-license.php.
 
-export LC_ALL=C
 set -e
 srcdir="$(dirname $0)"
 cd "$srcdir"

build-aux/m4/ax_boost_chrono.m4

@@ -1,5 +1,5 @@
 # ===========================================================================
-#     https://www.gnu.org/software/autoconf-archive/ax_boost_chrono.html
+#      http://www.gnu.org/software/autoconf-archive/ax_boost_chrono.html
 # ===========================================================================
 #
 # SYNOPSIS
@@ -8,7 +8,7 @@
 #
 # DESCRIPTION
 #
-#   Test for Chrono library from the Boost C++ libraries. The macro requires
+#   Test for System library from the Boost C++ libraries. The macro requires
 #   a preceding call to AX_BOOST_BASE. Further documentation is available at
 #   <http://randspringer.de/boost/index.html>.
 #
@@ -29,7 +29,7 @@
 #   and this notice are preserved. This file is offered as-is, without any
 #   warranty.
 
-#serial 4
+#serial 1
 
 AC_DEFUN([AX_BOOST_CHRONO],
 [
@@ -68,7 +68,7 @@ AC_DEFUN([AX_BOOST_CHRONO],
 			 CXXFLAGS_SAVE=$CXXFLAGS
 
 			 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[@%:@include <boost/chrono.hpp>]],
-                                   [[boost::chrono::system_clock::time_point* time = new boost::chrono::system_clock::time_point; delete time;]])],
+                                   [[boost::chrono::system_clock::time_point time;]])],
                    ax_cv_boost_chrono=yes, ax_cv_boost_chrono=no)
 			 CXXFLAGS=$CXXFLAGS_SAVE
              AC_LANG_POP([C++])
@@ -81,6 +81,7 @@ AC_DEFUN([AX_BOOST_CHRONO],
 
 			LDFLAGS_SAVE=$LDFLAGS
             if test "x$ax_boost_user_chrono_lib" = "x"; then
+                ax_lib=
                 for libextension in `ls $BOOSTLIBDIR/libboost_chrono*.so* $BOOSTLIBDIR/libboost_chrono*.dylib* $BOOSTLIBDIR/libboost_chrono*.a* 2>/dev/null | sed 's,.*/,,' | sed -e 's;^lib\(boost_chrono.*\)\.so.*$;\1;' -e 's;^lib\(boost_chrono.*\)\.dylib.*$;\1;' -e 's;^lib\(boost_chrono.*\)\.a.*$;\1;'` ; do
                      ax_lib=${libextension}
 				    AC_CHECK_LIB($ax_lib, exit,
@@ -105,7 +106,7 @@ AC_DEFUN([AX_BOOST_CHRONO],
 
             fi
             if test "x$ax_lib" = "x"; then
-                AC_MSG_ERROR(Could not find a version of the library!)
+                AC_MSG_ERROR(Could not find a version of the boost_chrono library!)
             fi
 			if test "x$link_chrono" = "xno"; then
 				AC_MSG_ERROR(Could not link against $ax_lib !)

build-aux/m4/ax_boost_program_options.m4

@@ -0,0 +1,108 @@
+# ============================================================================
+#  http://www.gnu.org/software/autoconf-archive/ax_boost_program_options.html
+# ============================================================================
+#
+# SYNOPSIS
+#
+#   AX_BOOST_PROGRAM_OPTIONS
+#
+# DESCRIPTION
+#
+#   Test for program options library from the Boost C++ libraries. The macro
+#   requires a preceding call to AX_BOOST_BASE. Further documentation is
+#   available at <http://randspringer.de/boost/index.html>.
+#
+#   This macro calls:
+#
+#     AC_SUBST(BOOST_PROGRAM_OPTIONS_LIB)
+#
+#   And sets:
+#
+#     HAVE_BOOST_PROGRAM_OPTIONS
+#
+# LICENSE
+#
+#   Copyright (c) 2009 Thomas Porschberg <thomas@randspringer.de>
+#
+#   Copying and distribution of this file, with or without modification, are
+#   permitted in any medium without royalty provided the copyright notice
+#   and this notice are preserved. This file is offered as-is, without any
+#   warranty.
+
+#serial 24
+
+AC_DEFUN([AX_BOOST_PROGRAM_OPTIONS],
+[
+	AC_ARG_WITH([boost-program-options],
+		AS_HELP_STRING([--with-boost-program-options@<:@=special-lib@:>@],
+                       [use the program options library from boost - it is possible to specify a certain library for the linker
+                        e.g. --with-boost-program-options=boost_program_options-gcc-mt-1_33_1 ]),
+        [
+        if test "$withval" = "no"; then
+			want_boost="no"
+        elif test "$withval" = "yes"; then
+            want_boost="yes"
+            ax_boost_user_program_options_lib=""
+        else
+		    want_boost="yes"
+		ax_boost_user_program_options_lib="$withval"
+		fi
+        ],
+        [want_boost="yes"]
+	)
+
+	if test "x$want_boost" = "xyes"; then
+        AC_REQUIRE([AC_PROG_CC])
+	    export want_boost
+		CPPFLAGS_SAVED="$CPPFLAGS"
+		CPPFLAGS="$CPPFLAGS $BOOST_CPPFLAGS"
+		export CPPFLAGS
+		LDFLAGS_SAVED="$LDFLAGS"
+		LDFLAGS="$LDFLAGS $BOOST_LDFLAGS"
+		export LDFLAGS
+		AC_CACHE_CHECK([whether the Boost::Program_Options library is available],
+					   ax_cv_boost_program_options,
+					   [AC_LANG_PUSH(C++)
+				AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[@%:@include <boost/program_options/errors.hpp>
+                                                          ]],
+                                  [[boost::program_options::error err("Error message");
+                                   return 0;]])],
+                           ax_cv_boost_program_options=yes, ax_cv_boost_program_options=no)
+					AC_LANG_POP([C++])
+		])
+		if test "$ax_cv_boost_program_options" = yes; then
+				AC_DEFINE(HAVE_BOOST_PROGRAM_OPTIONS,,[define if the Boost::PROGRAM_OPTIONS library is available])
+                  BOOSTLIBDIR=`echo $BOOST_LDFLAGS | sed -e 's/@<:@^\/@:>@*//'`
+                if test "x$ax_boost_user_program_options_lib" = "x"; then
+                for libextension in `ls $BOOSTLIBDIR/libboost_program_options*.so* 2>/dev/null | sed 's,.*/,,' | sed -e 's;^lib\(boost_program_options.*\)\.so.*$;\1;'` `ls $BOOSTLIBDIR/libboost_program_options*.dylib* 2>/dev/null | sed 's,.*/,,' | sed -e 's;^lib\(boost_program_options.*\)\.dylib.*$;\1;'` `ls $BOOSTLIBDIR/libboost_program_options*.a* 2>/dev/null | sed 's,.*/,,' | sed -e 's;^lib\(boost_program_options.*\)\.a.*$;\1;'` ; do
+                     ax_lib=${libextension}
+				    AC_CHECK_LIB($ax_lib, exit,
+                                 [BOOST_PROGRAM_OPTIONS_LIB="-l$ax_lib"; AC_SUBST(BOOST_PROGRAM_OPTIONS_LIB) link_program_options="yes"; break],
+                                 [link_program_options="no"])
+				done
+                if test "x$link_program_options" != "xyes"; then
+                for libextension in `ls $BOOSTLIBDIR/boost_program_options*.dll* 2>/dev/null | sed 's,.*/,,' | sed -e 's;^\(boost_program_options.*\)\.dll.*$;\1;'` `ls $BOOSTLIBDIR/boost_program_options*.a* 2>/dev/null | sed 's,.*/,,' | sed -e 's;^\(boost_program_options.*\)\.a.*$;\1;'` ; do
+                     ax_lib=${libextension}
+				    AC_CHECK_LIB($ax_lib, exit,
+                                 [BOOST_PROGRAM_OPTIONS_LIB="-l$ax_lib"; AC_SUBST(BOOST_PROGRAM_OPTIONS_LIB) link_program_options="yes"; break],
+                                 [link_program_options="no"])
+				done
+                fi
+                else
+                  for ax_lib in $ax_boost_user_program_options_lib boost_program_options-$ax_boost_user_program_options_lib; do
+				      AC_CHECK_LIB($ax_lib, main,
+                                   [BOOST_PROGRAM_OPTIONS_LIB="-l$ax_lib"; AC_SUBST(BOOST_PROGRAM_OPTIONS_LIB) link_program_options="yes"; break],
+                                   [link_program_options="no"])
+                  done
+                fi
+            if test "x$ax_lib" = "x"; then
+                AC_MSG_ERROR(Could not find a version of the boost_program_options library!)
+            fi
+				if test "x$link_program_options" != "xyes"; then
+					AC_MSG_ERROR([Could not link against [$ax_lib] !])
+				fi
+		fi
+		CPPFLAGS="$CPPFLAGS_SAVED"
+	LDFLAGS="$LDFLAGS_SAVED"
+	fi
+])

build-aux/m4/ax_boost_unit_test_framework.m4

@@ -1,6 +1,6 @@
-# =================================================================================
-#  https://www.gnu.org/software/autoconf-archive/ax_boost_unit_test_framework.html
-# =================================================================================
+# ================================================================================
+#  http://www.gnu.org/software/autoconf-archive/ax_boost_unit_test_framework.html
+# ================================================================================
 #
 # SYNOPSIS
 #
@@ -29,7 +29,7 @@
 #   and this notice are preserved. This file is offered as-is, without any
 #   warranty.
 
-#serial 21
+#serial 19
 
 AC_DEFUN([AX_BOOST_UNIT_TEST_FRAMEWORK],
 [
@@ -66,7 +66,7 @@ AC_DEFUN([AX_BOOST_UNIT_TEST_FRAMEWORK],
         [AC_LANG_PUSH([C++])
 			 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[@%:@include <boost/test/unit_test.hpp>]],
                                     [[using boost::unit_test::test_suite;
-							 test_suite* test= BOOST_TEST_SUITE( "Unit test example 1" ); if (test == NULL) { return 1; } else { return 0; }]])],
+							 test_suite* test= BOOST_TEST_SUITE( "Unit test example 1" ); return 0;]])],
                    ax_cv_boost_unit_test_framework=yes, ax_cv_boost_unit_test_framework=no)
          AC_LANG_POP([C++])
 		])
@@ -76,6 +76,7 @@ AC_DEFUN([AX_BOOST_UNIT_TEST_FRAMEWORK],
 
             if test "x$ax_boost_user_unit_test_framework_lib" = "x"; then
 			saved_ldflags="${LDFLAGS}"
+                ax_lib=
                 for monitor_library in `ls $BOOSTLIBDIR/libboost_unit_test_framework*.so* $BOOSTLIBDIR/libboost_unit_test_framework*.dylib* $BOOSTLIBDIR/libboost_unit_test_framework*.a* 2>/dev/null` ; do
                     if test -r $monitor_library ; then
                        libextension=`echo $monitor_library | sed 's,.*/,,' | sed -e 's;^lib\(boost_unit_test_framework.*\)\.so.*$;\1;' -e 's;^lib\(boost_unit_test_framework.*\)\.dylib.*$;\1;' -e 's;^lib\(boost_unit_test_framework.*\)\.a.*$;\1;'`
@@ -124,7 +125,7 @@ AC_DEFUN([AX_BOOST_UNIT_TEST_FRAMEWORK],
                done
             fi
             if test "x$ax_lib" = "x"; then
-                AC_MSG_ERROR(Could not find a version of the library!)
+                AC_MSG_ERROR(Could not find a version of the boost_unit_test_framework library!)
             fi
 			if test "x$link_unit_test_framework" != "xyes"; then
 				AC_MSG_ERROR(Could not link against $ax_lib !)

build-aux/m4/ax_cxx_compile_stdcxx.m4

@@ -57,14 +57,8 @@ AC_DEFUN([AX_CXX_COMPILE_STDCXX], [dnl
         [$3], [mandatory], [ax_cxx_compile_cxx$1_required=true],
         [$3], [optional], [ax_cxx_compile_cxx$1_required=false],
         [m4_fatal([invalid third argument `$3' to AX_CXX_COMPILE_STDCXX])])
-  m4_if([$4], [], [ax_cxx_compile_cxx$1_try_default=true],
-        [$4], [default], [ax_cxx_compile_cxx$1_try_default=true],
-        [$4], [nodefault], [ax_cxx_compile_cxx$1_try_default=false],
-        [m4_fatal([invalid fourth argument `$4' to AX_CXX_COMPILE_STDCXX])])
   AC_LANG_PUSH([C++])dnl
   ac_success=no
-
-  m4_if([$4], [nodefault], [], [dnl
   AC_CACHE_CHECK(whether $CXX supports C++$1 features by default,
   ax_cv_cxx_compile_cxx$1,
   [AC_COMPILE_IFELSE([AC_LANG_SOURCE([_AX_CXX_COMPILE_STDCXX_testbody_$1])],
@@ -72,7 +66,7 @@ AC_DEFUN([AX_CXX_COMPILE_STDCXX], [dnl
     [ax_cv_cxx_compile_cxx$1=no])])
   if test x$ax_cv_cxx_compile_cxx$1 = xyes; then
     ac_success=yes
-  fi])
+  fi
 
   m4_if([$2], [noext], [], [dnl
   if test x$ac_success = xno; then

build-aux/m4/bitcoin_find_bdb48.m4

@@ -3,76 +3,68 @@ dnl Distributed under the MIT software license, see the accompanying
 dnl file COPYING or http://www.opensource.org/licenses/mit-license.php.
 
 AC_DEFUN([BITCOIN_FIND_BDB48],[
-  AC_ARG_VAR(BDB_CFLAGS, [C compiler flags for BerkeleyDB, bypasses autodetection])
-  AC_ARG_VAR(BDB_LIBS, [Linker flags for BerkeleyDB, bypasses autodetection])
-
-  if test "x$BDB_CFLAGS" = "x"; then
-    AC_MSG_CHECKING([for Berkeley DB C++ headers])
-    BDB_CPPFLAGS=
-    bdbpath=X
-    bdb48path=X
-    bdbdirlist=
-    for _vn in 4.8 48 4 5 5.3 ''; do
-      for _pfx in b lib ''; do
-        bdbdirlist="$bdbdirlist ${_pfx}db${_vn}"
-      done
+  AC_MSG_CHECKING([for Berkeley DB C++ headers])
+  BDB_CPPFLAGS=
+  BDB_LIBS=
+  bdbpath=X
+  bdb48path=X
+  bdbdirlist=
+  for _vn in 4.8 48 4 5 ''; do
+    for _pfx in b lib ''; do
+      bdbdirlist="$bdbdirlist ${_pfx}db${_vn}"
     done
-    for searchpath in $bdbdirlist ''; do
-      test -n "${searchpath}" && searchpath="${searchpath}/"
-      AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-        #include <${searchpath}db_cxx.h>
-      ]],[[
-        #if !((DB_VERSION_MAJOR == 4 && DB_VERSION_MINOR >= 8) || DB_VERSION_MAJOR > 4)
-          #error "failed to find bdb 4.8+"
-        #endif
-      ]])],[
-        if test "x$bdbpath" = "xX"; then
-          bdbpath="${searchpath}"
-        fi
-      ],[
-        continue
-      ])
-      AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-        #include <${searchpath}db_cxx.h>
-      ]],[[
-        #if !(DB_VERSION_MAJOR == 4 && DB_VERSION_MINOR == 8)
-          #error "failed to find bdb 4.8"
-        #endif
-      ]])],[
-        bdb48path="${searchpath}"
-        break
-      ],[])
-    done
-    if test "x$bdbpath" = "xX"; then
-      AC_MSG_RESULT([no])
-      AC_MSG_ERROR([libdb_cxx headers missing, ]AC_PACKAGE_NAME[ requires this library for wallet functionality (--disable-wallet to disable wallet functionality)])
-    elif test "x$bdb48path" = "xX"; then
-      BITCOIN_SUBDIR_TO_INCLUDE(BDB_CPPFLAGS,[${bdbpath}],db_cxx)
-      AC_ARG_WITH([incompatible-bdb],[AS_HELP_STRING([--with-incompatible-bdb], [allow using a bdb version other than 4.8])],[
-        AC_MSG_WARN([Found Berkeley DB other than 4.8; wallets opened by this build will not be portable!])
-      ],[
-        AC_MSG_ERROR([Found Berkeley DB other than 4.8, required for portable wallets (--with-incompatible-bdb to ignore or --disable-wallet to disable wallet functionality)])
-      ])
-    else
-      BITCOIN_SUBDIR_TO_INCLUDE(BDB_CPPFLAGS,[${bdb48path}],db_cxx)
-      bdbpath="${bdb48path}"
-    fi
+  done
+  for searchpath in $bdbdirlist ''; do
+    test -n "${searchpath}" && searchpath="${searchpath}/"
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+      #include <${searchpath}db_cxx.h>
+    ]],[[
+      #if !((DB_VERSION_MAJOR == 4 && DB_VERSION_MINOR >= 8) || DB_VERSION_MAJOR > 4)
+        #error "failed to find bdb 4.8+"
+      #endif
+    ]])],[
+      if test "x$bdbpath" = "xX"; then
+        bdbpath="${searchpath}"
+      fi
+    ],[
+      continue
+    ])
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+      #include <${searchpath}db_cxx.h>
+    ]],[[
+      #if !(DB_VERSION_MAJOR == 4 && DB_VERSION_MINOR == 8)
+        #error "failed to find bdb 4.8"
+      #endif
+    ]])],[
+      bdb48path="${searchpath}"
+      break
+    ],[])
+  done
+  if test "x$bdbpath" = "xX"; then
+    AC_MSG_RESULT([no])
+    AC_MSG_ERROR([libdb_cxx headers missing, ]AC_PACKAGE_NAME[ requires this library for wallet functionality (--disable-wallet to disable wallet functionality)])
+  elif test "x$bdb48path" = "xX"; then
+    BITCOIN_SUBDIR_TO_INCLUDE(BDB_CPPFLAGS,[${bdbpath}],db_cxx)
+    AC_ARG_WITH([incompatible-bdb],[AS_HELP_STRING([--with-incompatible-bdb], [allow using a bdb version other than 4.8])],[
+      AC_MSG_WARN([Found Berkeley DB other than 4.8; wallets opened by this build will not be portable!])
+    ],[
+      AC_MSG_ERROR([Found Berkeley DB other than 4.8, required for portable wallets (--with-incompatible-bdb to ignore or --disable-wallet to disable wallet functionality)])
+    ])
   else
-    BDB_CPPFLAGS=${BDB_CFLAGS}
+    BITCOIN_SUBDIR_TO_INCLUDE(BDB_CPPFLAGS,[${bdb48path}],db_cxx)
+    bdbpath="${bdb48path}"
   fi
   AC_SUBST(BDB_CPPFLAGS)
   
+  # TODO: Ideally this could find the library version and make sure it matches the headers being used
+  for searchlib in db_cxx-4.8 db_cxx; do
+    AC_CHECK_LIB([$searchlib],[main],[
+      BDB_LIBS="-l${searchlib}"
+      break
+    ])
+  done
   if test "x$BDB_LIBS" = "x"; then
-    # TODO: Ideally this could find the library version and make sure it matches the headers being used
-    for searchlib in db_cxx-4.8 db_cxx db4_cxx; do
-      AC_CHECK_LIB([$searchlib],[main],[
-        BDB_LIBS="-l${searchlib}"
-        break
-      ])
-    done
-    if test "x$BDB_LIBS" = "x"; then
-        AC_MSG_ERROR([libdb_cxx missing, ]AC_PACKAGE_NAME[ requires this library for wallet functionality (--disable-wallet to disable wallet functionality)])
-    fi
+      AC_MSG_ERROR([libdb_cxx missing, ]AC_PACKAGE_NAME[ requires this library for wallet functionality (--disable-wallet to disable wallet functionality)])
   fi
   AC_SUBST(BDB_LIBS)
 ])

build-aux/m4/bitcoin_qt.m4

@@ -5,8 +5,8 @@ dnl file COPYING or http://www.opensource.org/licenses/mit-license.php.
 dnl Helper for cases where a qt dependency is not met.
 dnl Output: If qt version is auto, set bitcoin_enable_qt to false. Else, exit.
 AC_DEFUN([BITCOIN_QT_FAIL],[
-  if test "x$bitcoin_qt_want_version" = xauto && test "x$bitcoin_qt_force" != xyes; then
-    if test "x$bitcoin_enable_qt" != xno; then
+  if test "x$bitcoin_qt_want_version" = "xauto" && test x$bitcoin_qt_force != xyes; then
+    if test x$bitcoin_enable_qt != xno; then
       AC_MSG_WARN([$1; bitcoin-qt frontend will not be built])
     fi
     bitcoin_enable_qt=no
@@ -17,7 +17,7 @@ AC_DEFUN([BITCOIN_QT_FAIL],[
 ])
 
 AC_DEFUN([BITCOIN_QT_CHECK],[
-  if test "x$bitcoin_enable_qt" != xno && test "x$bitcoin_qt_want_version" != xno; then
+  if test "x$bitcoin_enable_qt" != "xno" && test x$bitcoin_qt_want_version != xno; then
     true
     $1
   else
@@ -35,12 +35,12 @@ dnl Inputs: $4: If "yes", don't fail if $2 is not found.
 dnl Output: $1 is set to the path of $2 if found. $2 are searched in order.
 AC_DEFUN([BITCOIN_QT_PATH_PROGS],[
   BITCOIN_QT_CHECK([
-    if test "x$3" != x; then
+    if test "x$3" != "x"; then
       AC_PATH_PROGS($1,$2,,$3)
     else
       AC_PATH_PROGS($1,$2)
     fi
-    if test "x$$1" = x && test "x$4" != xyes; then
+    if test "x$$1" = "x" && test "x$4" != "xyes"; then
       BITCOIN_QT_FAIL([$1 not found])
     fi
   ])
@@ -53,11 +53,11 @@ dnl CAUTION: Do not use this inside of a conditional.
 AC_DEFUN([BITCOIN_QT_INIT],[
   dnl enable qt support
   AC_ARG_WITH([gui],
-    [AS_HELP_STRING([--with-gui@<:@=no|qt5|auto@:>@],
-    [build bitcoin-qt GUI (default=auto)])],
+    [AS_HELP_STRING([--with-gui@<:@=no|qt4|qt5|auto@:>@],
+    [build bitcoin-qt GUI (default=auto, qt5 tried first)])],
     [
      bitcoin_qt_want_version=$withval
-     if test "x$bitcoin_qt_want_version" = xyes; then
+     if test x$bitcoin_qt_want_version = xyes; then
        bitcoin_qt_force=yes
        bitcoin_qt_want_version=auto
      fi
@@ -89,22 +89,23 @@ dnl Outputs: bitcoin_enable_qt, bitcoin_enable_qt_dbus, bitcoin_enable_qt_test
 AC_DEFUN([BITCOIN_QT_CONFIGURE],[
   use_pkgconfig=$1
 
-  if test "x$use_pkgconfig" = x; then
+  if test x$use_pkgconfig = x; then
     use_pkgconfig=yes
   fi
 
-  if test "x$use_pkgconfig" = xyes; then
-    BITCOIN_QT_CHECK([_BITCOIN_QT_FIND_LIBS_WITH_PKGCONFIG])
+  if test x$use_pkgconfig = xyes; then
+    BITCOIN_QT_CHECK([_BITCOIN_QT_FIND_LIBS_WITH_PKGCONFIG([$2])])
   else
     BITCOIN_QT_CHECK([_BITCOIN_QT_FIND_LIBS_WITHOUT_PKGCONFIG])
   fi
 
   dnl This is ugly and complicated. Yuck. Works as follows:
-  dnl For Qt5, we can check a header to find out whether Qt is build
-  dnl statically. When Qt is built statically, some plugins must be linked into
-  dnl the final binary as well.
-  dnl With Qt5, languages moved into core and the WindowsIntegration plugin was
-  dnl added.
+  dnl We can't discern whether Qt4 builds are static or not. For Qt5, we can
+  dnl check a header to find out. When Qt is built statically, some plugins must
+  dnl be linked into the final binary as well. These plugins have changed between
+  dnl Qt4 and Qt5. With Qt5, languages moved into core and the WindowsIntegration
+  dnl plugin was added. Since we can't tell if Qt4 is static or not, it is
+  dnl assumed for windows builds.
   dnl _BITCOIN_QT_CHECK_STATIC_PLUGINS does a quick link-check and appends the
   dnl results to QT_LIBS.
   BITCOIN_QT_CHECK([
@@ -112,67 +113,69 @@ AC_DEFUN([BITCOIN_QT_CONFIGURE],[
   TEMP_CXXFLAGS=$CXXFLAGS
   CPPFLAGS="$QT_INCLUDES $CPPFLAGS"
   CXXFLAGS="$PIC_FLAGS $CXXFLAGS"
-  _BITCOIN_QT_IS_STATIC
-  if test "x$bitcoin_cv_static_qt" = xyes; then
-    _BITCOIN_QT_FIND_STATIC_PLUGINS
-    AC_DEFINE(QT_STATICPLUGIN, 1, [Define this symbol if qt plugins are static])
-    AC_CACHE_CHECK(for Qt < 5.4, bitcoin_cv_need_acc_widget,[
-      AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-          #include <QtCore/qconfig.h>
-          #ifndef QT_VERSION
-          #  include <QtCore/qglobal.h>
-          #endif
-        ]],
-        [[
+  if test x$bitcoin_qt_got_major_vers = x5; then
+    _BITCOIN_QT_IS_STATIC
+    if test x$bitcoin_cv_static_qt = xyes; then
+      _BITCOIN_QT_FIND_STATIC_PLUGINS
+      AC_DEFINE(QT_STATICPLUGIN, 1, [Define this symbol if qt plugins are static])
+      AC_CACHE_CHECK(for Qt < 5.4, bitcoin_cv_need_acc_widget,[AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
+          [[#include <QtCore>]],[[
           #if QT_VERSION >= 0x050400
-          choke
+          choke;
           #endif
-        ]])],
-      [bitcoin_cv_need_acc_widget=yes],
-      [bitcoin_cv_need_acc_widget=no])
-    ])
-    if test "x$bitcoin_cv_need_acc_widget" = xyes; then
-      _BITCOIN_QT_CHECK_STATIC_PLUGINS([Q_IMPORT_PLUGIN(AccessibleFactory)], [-lqtaccessiblewidgets])
+          ]])],
+        [bitcoin_cv_need_acc_widget=yes],
+        [bitcoin_cv_need_acc_widget=no])
+      ])
+      if test "x$bitcoin_cv_need_acc_widget" = "xyes"; then
+        _BITCOIN_QT_CHECK_STATIC_PLUGINS([Q_IMPORT_PLUGIN(AccessibleFactory)], [-lqtaccessiblewidgets])
+      fi
+      if test x$TARGET_OS = xwindows; then
+        _BITCOIN_QT_CHECK_STATIC_PLUGINS([Q_IMPORT_PLUGIN(QWindowsIntegrationPlugin)],[-lqwindows])
+        AC_DEFINE(QT_QPA_PLATFORM_WINDOWS, 1, [Define this symbol if the qt platform is windows])
+      elif test x$TARGET_OS = xlinux; then
+        _BITCOIN_QT_CHECK_STATIC_PLUGINS([Q_IMPORT_PLUGIN(QXcbIntegrationPlugin)],[-lqxcb -lxcb-static])
+        AC_DEFINE(QT_QPA_PLATFORM_XCB, 1, [Define this symbol if the qt platform is xcb])
+      elif test x$TARGET_OS = xdarwin; then
+        AX_CHECK_LINK_FLAG([[-framework IOKit]],[QT_LIBS="$QT_LIBS -framework IOKit"],[AC_MSG_ERROR(could not iokit framework)])
+        _BITCOIN_QT_CHECK_STATIC_PLUGINS([Q_IMPORT_PLUGIN(QCocoaIntegrationPlugin)],[-lqcocoa])
+        AC_DEFINE(QT_QPA_PLATFORM_COCOA, 1, [Define this symbol if the qt platform is cocoa])
+      fi
     fi
-    _BITCOIN_QT_CHECK_STATIC_PLUGINS([Q_IMPORT_PLUGIN(QMinimalIntegrationPlugin)],[-lqminimal])
-    AC_DEFINE(QT_QPA_PLATFORM_MINIMAL, 1, [Define this symbol if the minimal qt platform exists])
-    if test "x$TARGET_OS" = xwindows; then
-      _BITCOIN_QT_CHECK_STATIC_PLUGINS([Q_IMPORT_PLUGIN(QWindowsIntegrationPlugin)],[-lqwindows])
-      AC_DEFINE(QT_QPA_PLATFORM_WINDOWS, 1, [Define this symbol if the qt platform is windows])
-    elif test "x$TARGET_OS" = xlinux; then
-      _BITCOIN_QT_CHECK_STATIC_PLUGINS([Q_IMPORT_PLUGIN(QXcbIntegrationPlugin)],[-lqxcb -lxcb-static])
-      AC_DEFINE(QT_QPA_PLATFORM_XCB, 1, [Define this symbol if the qt platform is xcb])
-    elif test "x$TARGET_OS" = xdarwin; then
-      AX_CHECK_LINK_FLAG([[-framework IOKit]],[QT_LIBS="$QT_LIBS -framework IOKit"],[AC_MSG_ERROR(could not iokit framework)])
-      _BITCOIN_QT_CHECK_STATIC_PLUGINS([Q_IMPORT_PLUGIN(QCocoaIntegrationPlugin)],[-lqcocoa])
-      AC_DEFINE(QT_QPA_PLATFORM_COCOA, 1, [Define this symbol if the qt platform is cocoa])
+  else
+    if test x$TARGET_OS = xwindows; then
+      AC_DEFINE(QT_STATICPLUGIN, 1, [Define this symbol if qt plugins are static])
+      _BITCOIN_QT_CHECK_STATIC_PLUGINS([
+         Q_IMPORT_PLUGIN(qcncodecs)
+         Q_IMPORT_PLUGIN(qjpcodecs)
+         Q_IMPORT_PLUGIN(qtwcodecs)
+         Q_IMPORT_PLUGIN(qkrcodecs)
+         Q_IMPORT_PLUGIN(AccessibleFactory)],
+         [-lqcncodecs -lqjpcodecs -lqtwcodecs -lqkrcodecs -lqtaccessiblewidgets])
     fi
   fi
   CPPFLAGS=$TEMP_CPPFLAGS
   CXXFLAGS=$TEMP_CXXFLAGS
   ])
 
-  if test "x$use_pkgconfig$qt_bin_path" = xyes; then
-    qt_bin_path="`$PKG_CONFIG --variable=host_bins Qt5Core 2>/dev/null`"
+  if test x$use_pkgconfig$qt_bin_path = xyes; then
+    if test x$bitcoin_qt_got_major_vers = x5; then
+      qt_bin_path="`$PKG_CONFIG --variable=host_bins Qt5Core 2>/dev/null`"
+    fi
   fi
 
-  if test "x$use_hardening" != xno; then
+  if test x$use_hardening != xno; then
     BITCOIN_QT_CHECK([
     AC_MSG_CHECKING(whether -fPIE can be used with this Qt config)
     TEMP_CPPFLAGS=$CPPFLAGS
     TEMP_CXXFLAGS=$CXXFLAGS
     CPPFLAGS="$QT_INCLUDES $CPPFLAGS"
     CXXFLAGS="$PIE_FLAGS $CXXFLAGS"
-    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-        #include <QtCore/qconfig.h>
-        #ifndef QT_VERSION
-        #  include <QtCore/qglobal.h>
-        #endif
-      ]],
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <QtCore/qconfig.h>]],
       [[
-        #if defined(QT_REDUCE_RELOCATIONS)
-        choke
-        #endif
+          #if defined(QT_REDUCE_RELOCATIONS)
+              choke;
+          #endif
       ]])],
       [ AC_MSG_RESULT(yes); QT_PIE_FLAGS=$PIE_FLAGS ],
       [ AC_MSG_RESULT(no); QT_PIE_FLAGS=$PIC_FLAGS]
@@ -185,16 +188,11 @@ AC_DEFUN([BITCOIN_QT_CONFIGURE],[
     AC_MSG_CHECKING(whether -fPIC is needed with this Qt config)
     TEMP_CPPFLAGS=$CPPFLAGS
     CPPFLAGS="$QT_INCLUDES $CPPFLAGS"
-    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-        #include <QtCore/qconfig.h>
-        #ifndef QT_VERSION
-        #  include <QtCore/qglobal.h>
-        #endif
-      ]],
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <QtCore/qconfig.h>]],
       [[
-        #if defined(QT_REDUCE_RELOCATIONS)
-        choke
-        #endif
+          #if defined(QT_REDUCE_RELOCATIONS)
+              choke;
+          #endif
       ]])],
       [ AC_MSG_RESULT(no)],
       [ AC_MSG_RESULT(yes); QT_PIE_FLAGS=$PIC_FLAGS]
@@ -203,11 +201,11 @@ AC_DEFUN([BITCOIN_QT_CONFIGURE],[
     ])
   fi
 
-  BITCOIN_QT_PATH_PROGS([MOC], [moc-qt5 moc5 moc], $qt_bin_path)
-  BITCOIN_QT_PATH_PROGS([UIC], [uic-qt5 uic5 uic], $qt_bin_path)
-  BITCOIN_QT_PATH_PROGS([RCC], [rcc-qt5 rcc5 rcc], $qt_bin_path)
-  BITCOIN_QT_PATH_PROGS([LRELEASE], [lrelease-qt5 lrelease5 lrelease], $qt_bin_path)
-  BITCOIN_QT_PATH_PROGS([LUPDATE], [lupdate-qt5 lupdate5 lupdate],$qt_bin_path, yes)
+  BITCOIN_QT_PATH_PROGS([MOC], [moc-qt${bitcoin_qt_got_major_vers} moc${bitcoin_qt_got_major_vers} moc], $qt_bin_path)
+  BITCOIN_QT_PATH_PROGS([UIC], [uic-qt${bitcoin_qt_got_major_vers} uic${bitcoin_qt_got_major_vers} uic], $qt_bin_path)
+  BITCOIN_QT_PATH_PROGS([RCC], [rcc-qt${bitcoin_qt_got_major_vers} rcc${bitcoin_qt_got_major_vers} rcc], $qt_bin_path)
+  BITCOIN_QT_PATH_PROGS([LRELEASE], [lrelease-qt${bitcoin_qt_got_major_vers} lrelease${bitcoin_qt_got_major_vers} lrelease], $qt_bin_path)
+  BITCOIN_QT_PATH_PROGS([LUPDATE], [lupdate-qt${bitcoin_qt_got_major_vers} lupdate${bitcoin_qt_got_major_vers} lupdate],$qt_bin_path, yes)
 
   MOC_DEFS='-DHAVE_CONFIG_H -I$(srcdir)'
   case $host in
@@ -230,23 +228,23 @@ AC_DEFUN([BITCOIN_QT_CONFIGURE],[
   BITCOIN_QT_CHECK([
     bitcoin_enable_qt=yes
     bitcoin_enable_qt_test=yes
-    if test "x$have_qt_test" = xno; then
+    if test x$have_qt_test = xno; then
       bitcoin_enable_qt_test=no
     fi
     bitcoin_enable_qt_dbus=no
-    if test "x$use_dbus" != xno && test "x$have_qt_dbus" = xyes; then
+    if test x$use_dbus != xno && test x$have_qt_dbus = xyes; then
       bitcoin_enable_qt_dbus=yes
     fi
-    if test "x$use_dbus" = xyes && test "x$have_qt_dbus" = xno; then
-      AC_MSG_ERROR([libQtDBus not found. Install libQtDBus or remove --with-qtdbus.])
+    if test x$use_dbus = xyes && test x$have_qt_dbus = xno; then
+      AC_MSG_ERROR("libQtDBus not found. Install libQtDBus or remove --with-qtdbus.")
     fi
-    if test "x$LUPDATE" = x; then
-      AC_MSG_WARN([lupdate is required to update qt translations])
+    if test x$LUPDATE = x; then
+      AC_MSG_WARN("lupdate is required to update qt translations")
     fi
   ],[
     bitcoin_enable_qt=no
   ])
-  AC_MSG_RESULT([$bitcoin_enable_qt (Qt5)])
+  AC_MSG_RESULT([$bitcoin_enable_qt (Qt${bitcoin_qt_got_major_vers})])
 
   AC_SUBST(QT_PIE_FLAGS)
   AC_SUBST(QT_INCLUDES)
@@ -256,7 +254,7 @@ AC_DEFUN([BITCOIN_QT_CONFIGURE],[
   AC_SUBST(QT_DBUS_LIBS)
   AC_SUBST(QT_TEST_INCLUDES)
   AC_SUBST(QT_TEST_LIBS)
-  AC_SUBST(QT_SELECT, qt5)
+  AC_SUBST(QT_SELECT, qt${bitcoin_qt_got_major_vers})
   AC_SUBST(MOC_DEFS)
 ])
 
@@ -269,64 +267,39 @@ dnl Requires: INCLUDES must be populated as necessary.
 dnl Output: bitcoin_cv_qt5=yes|no
 AC_DEFUN([_BITCOIN_QT_CHECK_QT5],[
   AC_CACHE_CHECK(for Qt 5, bitcoin_cv_qt5,[
-  AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-      #include <QtCore/qconfig.h>
-      #ifndef QT_VERSION
-      #  include <QtCore/qglobal.h>
-      #endif
-    ]],
+  AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
+    [[#include <QtCore>]],
     [[
-      #if QT_VERSION < 0x050000 || QT_VERSION_MAJOR < 5
-      choke
+      #if QT_VERSION < 0x050000
+      choke me
+      #else
+      return 0;
       #endif
     ]])],
     [bitcoin_cv_qt5=yes],
     [bitcoin_cv_qt5=no])
 ])])
 
-dnl Internal. Check if the included version of Qt is greater than Qt58.
-dnl Requires: INCLUDES must be populated as necessary.
-dnl Output: bitcoin_cv_qt5=yes|no
-AC_DEFUN([_BITCOIN_QT_CHECK_QT58],[
-  AC_CACHE_CHECK(for > Qt 5.7, bitcoin_cv_qt58,[
-  AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-      #include <QtCore/qconfig.h>
-      #ifndef QT_VERSION
-      #  include <QtCore/qglobal.h>
-      #endif
-    ]],
-    [[
-      #if QT_VERSION_MINOR < 8
-      choke
-      #endif
-    ]])],
-    [bitcoin_cv_qt58=yes],
-    [bitcoin_cv_qt58=no])
-])])
-
-
 dnl Internal. Check if the linked version of Qt was built as static libs.
-dnl Requires: Qt5.
+dnl Requires: Qt5. This check cannot determine if Qt4 is static.
 dnl Requires: INCLUDES and LIBS must be populated as necessary.
 dnl Output: bitcoin_cv_static_qt=yes|no
 dnl Output: Defines QT_STATICPLUGIN if plugins are static.
 AC_DEFUN([_BITCOIN_QT_IS_STATIC],[
   AC_CACHE_CHECK(for static Qt, bitcoin_cv_static_qt,[
-    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-        #include <QtCore/qconfig.h>
-        #ifndef QT_VERSION OR QT_VERSION_STR
-        #  include <QtCore/qglobal.h>
-        #endif
-      ]],
-      [[
-        #if !defined(QT_STATIC)
-        choke
-        #endif
-      ]])],
-      [bitcoin_cv_static_qt=yes],
-      [bitcoin_cv_static_qt=no])
-    ])
-  if test "x$bitcoin_cv_static_qt" = xyes; then
+  AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
+    [[#include <QtCore>]],
+    [[
+      #if defined(QT_STATIC)
+      return 0;
+      #else
+      choke me
+      #endif
+    ]])],
+    [bitcoin_cv_static_qt=yes],
+    [bitcoin_cv_static_qt=no])
+  ])
+  if test xbitcoin_cv_static_qt = xyes; then
     AC_DEFINE(QT_STATICPLUGIN, 1, [Define this symbol for static Qt plugins])
   fi
 ])
@@ -351,71 +324,52 @@ AC_DEFUN([_BITCOIN_QT_CHECK_STATIC_PLUGINS],[
 ])
 
 dnl Internal. Find paths necessary for linking qt static plugins
+dnl Inputs: bitcoin_qt_got_major_vers. 4 or 5.
 dnl Inputs: qt_plugin_path. optional.
 dnl Outputs: QT_LIBS is appended
 AC_DEFUN([_BITCOIN_QT_FIND_STATIC_PLUGINS],[
-    if test "x$qt_plugin_path" != x; then
-      QT_LIBS="$QT_LIBS -L$qt_plugin_path/platforms"
-      if test -d "$qt_plugin_path/accessible"; then
-        QT_LIBS="$QT_LIBS -L$qt_plugin_path/accessible"
+  if test x$bitcoin_qt_got_major_vers = x5; then
+      if test x$qt_plugin_path != x; then
+        QT_LIBS="$QT_LIBS -L$qt_plugin_path/platforms"
+        if test -d "$qt_plugin_path/accessible"; then
+          QT_LIBS="$QT_LIBS -L$qt_plugin_path/accessible"
+        fi
       fi
-     if test "x$use_pkgconfig" = xyes; then
+     if test x$use_pkgconfig = xyes; then
      : dnl
      m4_ifdef([PKG_CHECK_MODULES],[
-       if test x$bitcoin_cv_qt58 = xno; then
-         PKG_CHECK_MODULES([QTPLATFORM], [Qt5PlatformSupport], [QT_LIBS="$QTPLATFORM_LIBS $QT_LIBS"])
-       else
-         PKG_CHECK_MODULES([QTFONTDATABASE], [Qt5FontDatabaseSupport], [QT_LIBS="-lQt5FontDatabaseSupport $QT_LIBS"])
-         PKG_CHECK_MODULES([QTEVENTDISPATCHER], [Qt5EventDispatcherSupport], [QT_LIBS="-lQt5EventDispatcherSupport $QT_LIBS"])
-         PKG_CHECK_MODULES([QTTHEME], [Qt5ThemeSupport], [QT_LIBS="-lQt5ThemeSupport $QT_LIBS"])
-         PKG_CHECK_MODULES([QTDEVICEDISCOVERY], [Qt5DeviceDiscoverySupport], [QT_LIBS="-lQt5DeviceDiscoverySupport $QT_LIBS"])
-         PKG_CHECK_MODULES([QTACCESSIBILITY], [Qt5AccessibilitySupport], [QT_LIBS="-lQt5AccessibilitySupport $QT_LIBS"])
-         PKG_CHECK_MODULES([QTFB], [Qt5FbSupport], [QT_LIBS="-lQt5FbSupport $QT_LIBS"])
-                fi
-       if test "x$TARGET_OS" = xlinux; then
+       PKG_CHECK_MODULES([QTPLATFORM], [Qt5PlatformSupport], [QT_LIBS="$QTPLATFORM_LIBS $QT_LIBS"])
+       if test x$TARGET_OS = xlinux; then
          PKG_CHECK_MODULES([X11XCB], [x11-xcb], [QT_LIBS="$X11XCB_LIBS $QT_LIBS"])
          if ${PKG_CONFIG} --exists "Qt5Core >= 5.5" 2>/dev/null; then
            PKG_CHECK_MODULES([QTXCBQPA], [Qt5XcbQpa], [QT_LIBS="$QTXCBQPA_LIBS $QT_LIBS"])
          fi
-       elif test "x$TARGET_OS" = xdarwin; then
-         PKG_CHECK_MODULES([QTCLIPBOARD], [Qt5ClipboardSupport], [QT_LIBS="-lQt5ClipboardSupport $QT_LIBS"])
-         PKG_CHECK_MODULES([QTGRAPHICS], [Qt5GraphicsSupport], [QT_LIBS="-lQt5GraphicsSupport $QT_LIBS"])
-         PKG_CHECK_MODULES([QTCGL], [Qt5CglSupport], [QT_LIBS="-lQt5CglSupport $QT_LIBS"])
+       elif test x$TARGET_OS = xdarwin; then
+         PKG_CHECK_MODULES([QTPRINT], [Qt5PrintSupport], [QT_LIBS="$QTPRINT_LIBS $QT_LIBS"])
        fi
      ])
      else
-       if test "x$TARGET_OS" = xwindows; then
-         AC_CACHE_CHECK(for Qt >= 5.6, bitcoin_cv_need_platformsupport,[
-           AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-               #include <QtCore/qconfig.h>
-               #ifndef QT_VERSION
-               #  include <QtCore/qglobal.h>
-               #endif
-             ]],
-             [[
-               #if QT_VERSION < 0x050600 || QT_VERSION_MINOR < 6
-               choke
-               #endif
+       if test x$TARGET_OS = xwindows; then
+         AC_CACHE_CHECK(for Qt >= 5.6, bitcoin_cv_need_platformsupport,[AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
+             [[#include <QtCore>]],[[
+             #if QT_VERSION < 0x050600
+             choke;
+             #endif
              ]])],
            [bitcoin_cv_need_platformsupport=yes],
            [bitcoin_cv_need_platformsupport=no])
          ])
-         if test "x$bitcoin_cv_need_platformsupport" = xyes; then
-           if test x$bitcoin_cv_qt58 = xno; then
-             BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}PlatformSupport],[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXPlatformSupport not found)))
-           else
-             BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}FontDatabaseSupport],[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXFontDatabaseSupport not found)))
-             BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}EventDispatcherSupport],[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXEventDispatcherSupport not found)))
-             BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}ThemeSupport],[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXThemeSupport not found)))
-             BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}FbSupport],[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXFbSupport not found)))
-             BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}DeviceDiscoverySupport],[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXDeviceDiscoverySupport not found)))
-             BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}AccessibilitySupport],[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXAccessibilitySupport not found)))
-             QT_LIBS="$QT_LIBS -lversion -ldwmapi -luxtheme"
-           fi
+         if test x$bitcoin_cv_need_platformsupport = xyes; then
+           BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}PlatformSupport],[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXPlatformSupport not found)))
          fi
        fi
      fi
-   fi
+  else
+    if test x$qt_plugin_path != x; then
+      QT_LIBS="$QT_LIBS -L$qt_plugin_path/accessible"
+      QT_LIBS="$QT_LIBS -L$qt_plugin_path/codecs"
+    fi
+  fi
 ])
 
 dnl Internal. Find Qt libraries using pkg-config.
@@ -424,22 +378,46 @@ dnl         first.
 dnl Inputs: $1: If bitcoin_qt_want_version is "auto", check for this version
 dnl         first.
 dnl Outputs: All necessary QT_* variables are set.
+dnl Outputs: bitcoin_qt_got_major_vers is set to "4" or "5".
 dnl Outputs: have_qt_test and have_qt_dbus are set (if applicable) to yes|no.
 AC_DEFUN([_BITCOIN_QT_FIND_LIBS_WITH_PKGCONFIG],[
   m4_ifdef([PKG_CHECK_MODULES],[
-    QT_LIB_PREFIX=Qt5
+  auto_priority_version=$1
+  if test x$auto_priority_version = x; then
+    auto_priority_version=qt5
+  fi
+    if test x$bitcoin_qt_want_version = xqt5 ||  ( test x$bitcoin_qt_want_version = xauto && test x$auto_priority_version = xqt5 ); then
+      QT_LIB_PREFIX=Qt5
+      bitcoin_qt_got_major_vers=5
+    else
+      QT_LIB_PREFIX=Qt
+      bitcoin_qt_got_major_vers=4
+    fi
     qt5_modules="Qt5Core Qt5Gui Qt5Network Qt5Widgets"
+    qt4_modules="QtCore QtGui QtNetwork"
     BITCOIN_QT_CHECK([
-      PKG_CHECK_MODULES([QT5], [$qt5_modules], [QT_INCLUDES="$QT5_CFLAGS"; QT_LIBS="$QT5_LIBS" have_qt=yes],[have_qt=no])
+      if test x$bitcoin_qt_want_version = xqt5 || ( test x$bitcoin_qt_want_version = xauto && test x$auto_priority_version = xqt5 ); then
+        PKG_CHECK_MODULES([QT], [$qt5_modules], [QT_INCLUDES="$QT_CFLAGS"; have_qt=yes],[have_qt=no])
+      elif test x$bitcoin_qt_want_version = xqt4 || ( test x$bitcoin_qt_want_version = xauto && test x$auto_priority_version = xqt4 ); then
+        PKG_CHECK_MODULES([QT], [$qt4_modules], [QT_INCLUDES="$QT_CFLAGS"; have_qt=yes], [have_qt=no])
+      fi
 
-      if test "x$have_qt" != xyes; then
+      dnl qt version is set to 'auto' and the preferred version wasn't found. Now try the other.
+      if test x$have_qt = xno && test x$bitcoin_qt_want_version = xauto; then
+        if test x$auto_priority_version = xqt5; then
+          PKG_CHECK_MODULES([QT], [$qt4_modules], [QT_INCLUDES="$QT_CFLAGS"; have_qt=yes; QT_LIB_PREFIX=Qt; bitcoin_qt_got_major_vers=4], [have_qt=no])
+        else
+          PKG_CHECK_MODULES([QT], [$qt5_modules], [QT_INCLUDES="$QT_CFLAGS"; have_qt=yes; QT_LIB_PREFIX=Qt5; bitcoin_qt_got_major_vers=5], [have_qt=no])
+        fi
+      fi
+      if test x$have_qt != xyes; then
         have_qt=no
         BITCOIN_QT_FAIL([Qt dependencies not found])
       fi
     ])
     BITCOIN_QT_CHECK([
       PKG_CHECK_MODULES([QT_TEST], [${QT_LIB_PREFIX}Test], [QT_TEST_INCLUDES="$QT_TEST_CFLAGS"; have_qt_test=yes], [have_qt_test=no])
-      if test "x$use_dbus" != xno; then
+      if test x$use_dbus != xno; then
         PKG_CHECK_MODULES([QT_DBUS], [${QT_LIB_PREFIX}DBus], [QT_DBUS_INCLUDES="$QT_DBUS_CFLAGS"; have_qt_dbus=yes], [have_qt_dbus=no])
       fi
     ])
@@ -452,6 +430,7 @@ dnl from the discovered headers.
 dnl Inputs: bitcoin_qt_want_version (from --with-gui=). The version to use.
 dnl         If "auto", the version will be discovered by _BITCOIN_QT_CHECK_QT5.
 dnl Outputs: All necessary QT_* variables are set.
+dnl Outputs: bitcoin_qt_got_major_vers is set to "4" or "5".
 dnl Outputs: have_qt_test and have_qt_dbus are set (if applicable) to yes|no.
 AC_DEFUN([_BITCOIN_QT_FIND_LIBS_WITHOUT_PKGCONFIG],[
   TEMP_CPPFLAGS="$CPPFLAGS"
@@ -459,7 +438,7 @@ AC_DEFUN([_BITCOIN_QT_FIND_LIBS_WITHOUT_PKGCONFIG],[
   CXXFLAGS="$PIC_FLAGS $CXXFLAGS"
   TEMP_LIBS="$LIBS"
   BITCOIN_QT_CHECK([
-    if test "x$qt_include_path" != x; then
+    if test x$qt_include_path != x; then
       QT_INCLUDES="-I$qt_include_path -I$qt_include_path/QtCore -I$qt_include_path/QtGui -I$qt_include_path/QtWidgets -I$qt_include_path/QtNetwork -I$qt_include_path/QtTest -I$qt_include_path/QtDBus"
       CPPFLAGS="$QT_INCLUDES $CPPFLAGS"
     fi
@@ -470,52 +449,54 @@ AC_DEFUN([_BITCOIN_QT_FIND_LIBS_WITHOUT_PKGCONFIG],[
   BITCOIN_QT_CHECK([AC_CHECK_HEADER([QLocalSocket],, BITCOIN_QT_FAIL(QtNetwork headers missing))])
 
   BITCOIN_QT_CHECK([
-    if test "x$bitcoin_qt_want_version" = xauto; then
+    if test x$bitcoin_qt_want_version = xauto; then
       _BITCOIN_QT_CHECK_QT5
-      _BITCOIN_QT_CHECK_QT58
     fi
-    QT_LIB_PREFIX=Qt5
+    if test x$bitcoin_cv_qt5 = xyes || test x$bitcoin_qt_want_version = xqt5; then
+      QT_LIB_PREFIX=Qt5
+      bitcoin_qt_got_major_vers=5
+    else
+      QT_LIB_PREFIX=Qt
+      bitcoin_qt_got_major_vers=4
+    fi
   ])
 
   BITCOIN_QT_CHECK([
     LIBS=
-    if test "x$qt_lib_path" != x; then
+    if test x$qt_lib_path != x; then
       LIBS="$LIBS -L$qt_lib_path"
     fi
 
-    if test "x$TARGET_OS" = xwindows; then
+    if test x$TARGET_OS = xwindows; then
       AC_CHECK_LIB([imm32],      [main],, BITCOIN_QT_FAIL(libimm32 not found))
     fi
   ])
 
   BITCOIN_QT_CHECK(AC_CHECK_LIB([z] ,[main],,AC_MSG_WARN([zlib not found. Assuming qt has it built-in])))
-  BITCOIN_QT_CHECK(AC_SEARCH_LIBS([jpeg_create_decompress] ,[qtjpeg jpeg],,AC_MSG_WARN([libjpeg not found. Assuming qt has it built-in])))
-  if test x$bitcoin_cv_qt58 = xno; then
-    BITCOIN_QT_CHECK(AC_SEARCH_LIBS([png_error] ,[qtpng png],,AC_MSG_WARN([libpng not found. Assuming qt has it built-in])))
-    BITCOIN_QT_CHECK(AC_SEARCH_LIBS([pcre16_exec], [qtpcre pcre16],,AC_MSG_WARN([libpcre16 not found. Assuming qt has it built-in])))
-  else
-    BITCOIN_QT_CHECK(AC_SEARCH_LIBS([png_error] ,[qtlibpng png],,AC_MSG_WARN([libpng not found. Assuming qt has it built-in])))
-    BITCOIN_QT_CHECK(AC_SEARCH_LIBS([pcre2_match_16], [qtpcre2 libqtpcre2],,AC_MSG_WARN([libqtpcre2 not found. Assuming qt has it built-in])))
+  BITCOIN_QT_CHECK(AC_CHECK_LIB([png] ,[main],,AC_MSG_WARN([libpng not found. Assuming qt has it built-in])))
+  BITCOIN_QT_CHECK(AC_CHECK_LIB([jpeg] ,[main],,AC_MSG_WARN([libjpeg not found. Assuming qt has it built-in])))
+  BITCOIN_QT_CHECK(AC_SEARCH_LIBS([pcre16_exec], [qtpcre pcre16],,AC_MSG_WARN([libpcre16 not found. Assuming qt has it built-in])))
+  BITCOIN_QT_CHECK(AC_SEARCH_LIBS([hb_ot_tags_from_script] ,[qtharfbuzzng harfbuzz],,AC_MSG_WARN([libharfbuzz not found. Assuming qt has it built-in or support is disabled])))
+  BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}Core]   ,[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXCore not found)))
+  BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}Gui]    ,[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXGui not found)))
+  BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}Network],[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXNetwork not found)))
+  if test x$bitcoin_qt_got_major_vers = x5; then
+    BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}Widgets],[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXWidgets not found)))
   fi
-  BITCOIN_QT_CHECK(AC_SEARCH_LIBS([hb_ot_tags_from_script] ,[qtharfbuzzng qtharfbuzz harfbuzz],,AC_MSG_WARN([libharfbuzz not found. Assuming qt has it built-in or support is disabled])))
-  BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}Core]   ,[main],,BITCOIN_QT_FAIL(lib${QT_LIB_PREFIX}Core not found)))
-  BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}Gui]    ,[main],,BITCOIN_QT_FAIL(lib${QT_LIB_PREFIX}Gui not found)))
-  BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}Network],[main],,BITCOIN_QT_FAIL(lib${QT_LIB_PREFIX}Network not found)))
-  BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}Widgets],[main],,BITCOIN_QT_FAIL(lib${QT_LIB_PREFIX}Widgets not found)))
   QT_LIBS="$LIBS"
   LIBS="$TEMP_LIBS"
 
   BITCOIN_QT_CHECK([
     LIBS=
-    if test "x$qt_lib_path" != x; then
+    if test x$qt_lib_path != x; then
       LIBS="-L$qt_lib_path"
     fi
     AC_CHECK_LIB([${QT_LIB_PREFIX}Test],      [main],, have_qt_test=no)
     AC_CHECK_HEADER([QTest],, have_qt_test=no)
     QT_TEST_LIBS="$LIBS"
-    if test "x$use_dbus" != xno; then
+    if test x$use_dbus != xno; then
       LIBS=
-      if test "x$qt_lib_path" != x; then
+      if test x$qt_lib_path != x; then
         LIBS="-L$qt_lib_path"
       fi
       AC_CHECK_LIB([${QT_LIB_PREFIX}DBus],      [main],, have_qt_dbus=no)

configure.ac

@@ -1,15 +1,15 @@
 dnl require autoconf 2.60 (AS_ECHO/AS_ECHO_N)
 AC_PREREQ([2.60])
 define(_CLIENT_VERSION_MAJOR, 0)
-define(_CLIENT_VERSION_MINOR, 17)
+define(_CLIENT_VERSION_MINOR, 13)
 define(_CLIENT_VERSION_REVISION, 2)
 define(_CLIENT_VERSION_BUILD, 0)
 define(_CLIENT_VERSION_IS_RELEASE, true)
-define(_COPYRIGHT_YEAR, 2018)
+define(_COPYRIGHT_YEAR, 2016)
 define(_COPYRIGHT_HOLDERS,[The %s developers])
 define(_COPYRIGHT_HOLDERS_SUBSTITUTION,[[Bitcoin Core]])
 AC_INIT([Bitcoin Core],[_CLIENT_VERSION_MAJOR._CLIENT_VERSION_MINOR._CLIENT_VERSION_REVISION],[https://github.com/bitcoin/bitcoin/issues],[bitcoin],[https://bitcoincore.org/])
-AC_CONFIG_SRCDIR([src/validation.cpp])
+AC_CONFIG_SRCDIR([src/main.cpp])
 AC_CONFIG_HEADERS([src/config/bitcoin-config.h])
 AC_CONFIG_AUX_DIR([build-aux])
 AC_CONFIG_MACRO_DIR([build-aux/m4])
@@ -19,12 +19,6 @@ BITCOIN_GUI_NAME=bitcoin-qt
 BITCOIN_CLI_NAME=bitcoin-cli
 BITCOIN_TX_NAME=bitcoin-tx
 
-dnl Unless the user specified ARFLAGS, force it to be cr
-AC_ARG_VAR(ARFLAGS, [Flags for the archiver, defaults to <cr> if not set])
-if test "x${ARFLAGS+set}" != "xset"; then
-  ARFLAGS="cr"
-fi
-
 AC_CANONICAL_HOST
 
 AH_TOP([#ifndef BITCOIN_CONFIG_H])
@@ -61,7 +55,7 @@ case $host in
   ;;
 esac
 dnl Require C++11 compiler (no GNU extensions)
-AX_CXX_COMPILE_STDCXX([11], [noext], [mandatory], [nodefault])
+AX_CXX_COMPILE_STDCXX([11], [noext], [mandatory])
 dnl Check if -latomic is required for <std::atomic>
 CHECK_ATOMIC
 
@@ -83,8 +77,9 @@ AC_PATH_TOOL(RANLIB, ranlib)
 AC_PATH_TOOL(STRIP, strip)
 AC_PATH_TOOL(GCOV, gcov)
 AC_PATH_PROG(LCOV, lcov)
+AC_PATH_PROG(JAVA, java)
 dnl Python 3.x is supported from 3.4 on (see https://github.com/bitcoin/bitcoin/issues/7893)
-AC_PATH_PROGS([PYTHON], [python3.7 python3.6 python3.5 python3.4 python3 python])
+AC_PATH_PROGS([PYTHON], [python3.6 python3.5 python3.4 python3 python2.7 python2 python])
 AC_PATH_PROG(GENHTML, genhtml)
 AC_PATH_PROG([GIT], [git])
 AC_PATH_PROG(CCACHE,ccache)
@@ -93,11 +88,6 @@ AC_PATH_PROG(HEXDUMP,hexdump)
 AC_PATH_TOOL(READELF, readelf)
 AC_PATH_TOOL(CPPFILT, c++filt)
 AC_PATH_TOOL(OBJCOPY, objcopy)
-AC_PATH_PROG(DOXYGEN, doxygen)
-if test -z "$DOXYGEN"; then
-   AC_MSG_WARN([Doxygen not found])
-fi
-AM_CONDITIONAL([HAVE_DOXYGEN], [test -n "$DOXYGEN"])
 
 AC_ARG_VAR(PYTHONPATH, Augments the default search path for python module files)
 
@@ -135,10 +125,20 @@ AC_ARG_ENABLE(bench,
     [use_bench=$enableval],
     [use_bench=yes])
 
-AC_ARG_ENABLE([extended-functional-tests],
-    AS_HELP_STRING([--enable-extended-functional-tests],[enable expensive functional tests when using lcov (default no)]),
-    [use_extended_functional_tests=$enableval],
-    [use_extended_functional_tests=no])
+AC_ARG_WITH([comparison-tool],
+    AS_HELP_STRING([--with-comparison-tool],[path to java comparison tool (requires --enable-tests)]),
+    [use_comparison_tool=$withval],
+    [use_comparison_tool=no])
+
+AC_ARG_ENABLE([comparison-tool-reorg-tests],
+    AS_HELP_STRING([--enable-comparison-tool-reorg-tests],[enable expensive reorg tests in the comparison tool (default no)]),
+    [use_comparison_tool_reorg_tests=$enableval],
+    [use_comparison_tool_reorg_tests=no])
+
+AC_ARG_ENABLE([extended-rpc-tests],
+    AS_HELP_STRING([--enable-extended-rpc-tests],[enable expensive RPC tests when using lcov (default no)]),
+    [use_extended_rpc_tests=$enableval],
+    [use_extended_rpc_tests=no])
 
 AC_ARG_WITH([qrencode],
   [AS_HELP_STRING([--with-qrencode],
@@ -148,9 +148,9 @@ AC_ARG_WITH([qrencode],
 
 AC_ARG_ENABLE([hardening],
   [AS_HELP_STRING([--disable-hardening],
-  [do not attempt to harden the resulting executables (default is to harden when possible)])],
+  [do not attempt to harden the resulting executables (default is to harden)])],
   [use_hardening=$enableval],
-  [use_hardening=auto])
+  [use_hardening=yes])
 
 AC_ARG_ENABLE([reduce-exports],
   [AS_HELP_STRING([--enable-reduce-exports],
@@ -167,31 +167,15 @@ AC_ARG_ENABLE([ccache],
 AC_ARG_ENABLE([lcov],
   [AS_HELP_STRING([--enable-lcov],
   [enable lcov testing (default is no)])],
-  [use_lcov=$enableval],
+  [use_lcov=yes],
   [use_lcov=no])
 
-AC_ARG_ENABLE([lcov-branch-coverage],
-  [AS_HELP_STRING([--enable-lcov-branch-coverage],
-  [enable lcov testing branch coverage (default is no)])],
-  [use_lcov_branch=yes],
-  [use_lcov_branch=no])
-
 AC_ARG_ENABLE([glibc-back-compat],
   [AS_HELP_STRING([--enable-glibc-back-compat],
   [enable backwards compatibility with glibc])],
   [use_glibc_compat=$enableval],
   [use_glibc_compat=no])
 
-AC_ARG_ENABLE([asm],
-  [AS_HELP_STRING([--enable-asm],
-  [Enable assembly routines (default is yes)])],
-  [use_asm=$enableval],
-  [use_asm=yes])
-
-if test "x$use_asm" = xyes; then
-  AC_DEFINE(USE_ASM, 1, [Define this symbol to build in assembly routines])
-fi
-
 AC_ARG_WITH([system-univalue],
   [AS_HELP_STRING([--with-system-univalue],
   [Build with system UniValue (default is no)])],
@@ -206,12 +190,6 @@ AC_ARG_ENABLE([zmq],
 
 AC_ARG_WITH([protoc-bindir],[AS_HELP_STRING([--with-protoc-bindir=BIN_DIR],[specify protoc bin path])], [protoc_bin_path=$withval], [])
 
-AC_ARG_ENABLE(man,
-    [AS_HELP_STRING([--disable-man],
-                    [do not install man pages (default is to install)])],,
-    enable_man=yes)
-AM_CONDITIONAL(ENABLE_MAN, test "$enable_man" != no)
-
 # Enable debug
 AC_ARG_ENABLE([debug],
     [AS_HELP_STRING([--enable-debug],
@@ -219,178 +197,34 @@ AC_ARG_ENABLE([debug],
     [enable_debug=$enableval],
     [enable_debug=no])
 
-# Enable different -fsanitize options
-AC_ARG_WITH([sanitizers],
-    [AS_HELP_STRING([--with-sanitizers],
-                    [comma separated list of extra sanitizers to build with (default is none enabled)])],
-    [use_sanitizers=$withval])
-
-# Enable gprof profiling
-AC_ARG_ENABLE([gprof],
-    [AS_HELP_STRING([--enable-gprof],
-                    [use gprof profiling compiler flags (default is no)])],
-    [enable_gprof=$enableval],
-    [enable_gprof=no])
-
-# Turn warnings into errors
-AC_ARG_ENABLE([werror],
-    [AS_HELP_STRING([--enable-werror],
-                    [Treat certain compiler warnings as errors (default is no)])],
-    [enable_werror=$enableval],
-    [enable_werror=no])
-
 AC_LANG_PUSH([C++])
 AX_CHECK_COMPILE_FLAG([-Werror],[CXXFLAG_WERROR="-Werror"],[CXXFLAG_WERROR=""])
 
 if test "x$enable_debug" = xyes; then
-  # Clear default -g -O2 flags
-  if test "x$CXXFLAGS_overridden" = xno; then
-	CXXFLAGS=""
-  fi
-  # Prefer -Og, fall back to -O0 if that is unavailable.
-  AX_CHECK_COMPILE_FLAG(
-    [-Og],
-    [[DEBUG_CXXFLAGS="$DEBUG_CXXFLAGS -Og"]],
-    [AX_CHECK_COMPILE_FLAG([-O0],[[DEBUG_CXXFLAGS="$DEBUG_CXXFLAGS -O0"]],,[[$CXXFLAG_WERROR]])],
-    [[$CXXFLAG_WERROR]])
+    CPPFLAGS="$CPPFLAGS -DDEBUG -DDEBUG_LOCKORDER"
+    if test "x$GCC" = xyes; then
+        CFLAGS="$CFLAGS -g3 -O0"
+    fi
 
-  # Prefer -g3, fall back to -g if that is unavailable.
-  AX_CHECK_COMPILE_FLAG(
-    [-g3],
-    [[DEBUG_CXXFLAGS="$DEBUG_CXXFLAGS -g3"]],
-    [AX_CHECK_COMPILE_FLAG([-g],[[DEBUG_CXXFLAGS="$DEBUG_CXXFLAGS -g"]],,[[$CXXFLAG_WERROR]])],
-    [[$CXXFLAG_WERROR]])
-
-  AX_CHECK_PREPROC_FLAG([-DDEBUG],[[DEBUG_CPPFLAGS="$DEBUG_CPPFLAGS -DDEBUG"]],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_PREPROC_FLAG([-DDEBUG_LOCKORDER],[[DEBUG_CPPFLAGS="$DEBUG_CPPFLAGS -DDEBUG_LOCKORDER"]],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_COMPILE_FLAG([-ftrapv],[DEBUG_CXXFLAGS="$DEBUG_CXXFLAGS -ftrapv"],,[[$CXXFLAG_WERROR]])
-fi
-
-if test x$use_sanitizers != x; then
-  # First check if the compiler accepts flags. If an incompatible pair like
-  # -fsanitize=address,thread is used here, this check will fail. This will also
-  # fail if a bad argument is passed, e.g. -fsanitize=undfeined
-  AX_CHECK_COMPILE_FLAG(
-    [[-fsanitize=$use_sanitizers]],
-    [[SANITIZER_CXXFLAGS=-fsanitize=$use_sanitizers]],
-    [AC_MSG_ERROR([compiler did not accept requested flags])])
-
-  # Some compilers (e.g. GCC) require additional libraries like libasan,
-  # libtsan, libubsan, etc. Make sure linking still works with the sanitize
-  # flag. This is a separate check so we can give a better error message when
-  # the sanitize flags are supported by the compiler but the actual sanitizer
-  # libs are missing.
-  AX_CHECK_LINK_FLAG(
-    [[-fsanitize=$use_sanitizers]],
-    [[SANITIZER_LDFLAGS=-fsanitize=$use_sanitizers]],
-    [AC_MSG_ERROR([linker did not accept requested flags, you are missing required libraries])])
-fi
-
-ERROR_CXXFLAGS=
-if test "x$enable_werror" = "xyes"; then
-  if test "x$CXXFLAG_WERROR" = "x"; then
-    AC_MSG_ERROR("enable-werror set but -Werror is not usable")
-  fi
-  AX_CHECK_COMPILE_FLAG([-Werror=vla],[ERROR_CXXFLAGS="$ERROR_CXXFLAGS -Werror=vla"],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_COMPILE_FLAG([-Werror=thread-safety-analysis],[ERROR_CXXFLAGS="$ERROR_CXXFLAGS -Werror=thread-safety-analysis"],,[[$CXXFLAG_WERROR]])
+    if test "x$GXX" = xyes; then
+        CXXFLAGS="$CXXFLAGS -g3 -O0"
+    fi
 fi
 
 if test "x$CXXFLAGS_overridden" = "xno"; then
-  AX_CHECK_COMPILE_FLAG([-Wall],[WARN_CXXFLAGS="$WARN_CXXFLAGS -Wall"],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_COMPILE_FLAG([-Wextra],[WARN_CXXFLAGS="$WARN_CXXFLAGS -Wextra"],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_COMPILE_FLAG([-Wformat],[WARN_CXXFLAGS="$WARN_CXXFLAGS -Wformat"],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_COMPILE_FLAG([-Wvla],[WARN_CXXFLAGS="$WARN_CXXFLAGS -Wvla"],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_COMPILE_FLAG([-Wformat-security],[WARN_CXXFLAGS="$WARN_CXXFLAGS -Wformat-security"],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_COMPILE_FLAG([-Wthread-safety-analysis],[WARN_CXXFLAGS="$WARN_CXXFLAGS -Wthread-safety-analysis"],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_COMPILE_FLAG([-Wrange-loop-analysis],[WARN_CXXFLAGS="$WARN_CXXFLAGS -Wrange-loop-analysis"],,[[$CXXFLAG_WERROR]])
+  AX_CHECK_COMPILE_FLAG([-Wall],[CXXFLAGS="$CXXFLAGS -Wall"],,[[$CXXFLAG_WERROR]])
+  AX_CHECK_COMPILE_FLAG([-Wextra],[CXXFLAGS="$CXXFLAGS -Wextra"],,[[$CXXFLAG_WERROR]])
+  AX_CHECK_COMPILE_FLAG([-Wformat],[CXXFLAGS="$CXXFLAGS -Wformat"],,[[$CXXFLAG_WERROR]])
+  AX_CHECK_COMPILE_FLAG([-Wformat-security],[CXXFLAGS="$CXXFLAGS -Wformat-security"],,[[$CXXFLAG_WERROR]])
 
   ## Some compilers (gcc) ignore unknown -Wno-* options, but warn about all
   ## unknown options if any other warning is produced. Test the -Wfoo case, and
   ## set the -Wno-foo case if it works.
-  AX_CHECK_COMPILE_FLAG([-Wunused-parameter],[NOWARN_CXXFLAGS="$NOWARN_CXXFLAGS -Wno-unused-parameter"],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_COMPILE_FLAG([-Wself-assign],[NOWARN_CXXFLAGS="$NOWARN_CXXFLAGS -Wno-self-assign"],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_COMPILE_FLAG([-Wunused-local-typedef],[NOWARN_CXXFLAGS="$NOWARN_CXXFLAGS -Wno-unused-local-typedef"],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_COMPILE_FLAG([-Wdeprecated-register],[NOWARN_CXXFLAGS="$NOWARN_CXXFLAGS -Wno-deprecated-register"],,[[$CXXFLAG_WERROR]])
-  AX_CHECK_COMPILE_FLAG([-Wimplicit-fallthrough],[NOWARN_CXXFLAGS="$NOWARN_CXXFLAGS -Wno-implicit-fallthrough"],,[[$CXXFLAG_WERROR]])
+  AX_CHECK_COMPILE_FLAG([-Wunused-parameter],[CXXFLAGS="$CXXFLAGS -Wno-unused-parameter"],,[[$CXXFLAG_WERROR]])
+  AX_CHECK_COMPILE_FLAG([-Wself-assign],[CXXFLAGS="$CXXFLAGS -Wno-self-assign"],,[[$CXXFLAG_WERROR]])
+  AX_CHECK_COMPILE_FLAG([-Wunused-local-typedef],[CXXFLAGS="$CXXFLAGS -Wno-unused-local-typedef"],,[[$CXXFLAG_WERROR]])
+  AX_CHECK_COMPILE_FLAG([-Wdeprecated-register],[CXXFLAGS="$CXXFLAGS -Wno-deprecated-register"],,[[$CXXFLAG_WERROR]])
 fi
-
-# Check for optional instruction set support. Enabling these does _not_ imply that all code will
-# be compiled with them, rather that specific objects/libs may use them after checking for runtime
-# compatibility.
-AX_CHECK_COMPILE_FLAG([-msse4.2],[[SSE42_CXXFLAGS="-msse4.2"]],,[[$CXXFLAG_WERROR]])
-AX_CHECK_COMPILE_FLAG([-msse4.1],[[SSE41_CXXFLAGS="-msse4.1"]],,[[$CXXFLAG_WERROR]])
-AX_CHECK_COMPILE_FLAG([-mavx -mavx2],[[AVX2_CXXFLAGS="-mavx -mavx2"]],,[[$CXXFLAG_WERROR]])
-AX_CHECK_COMPILE_FLAG([-msse4 -msha],[[SHANI_CXXFLAGS="-msse4 -msha"]],,[[$CXXFLAG_WERROR]])
-
-TEMP_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $SSE42_CXXFLAGS"
-AC_MSG_CHECKING(for assembler crc32 support)
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-    #include <stdint.h>
-    #if defined(_MSC_VER)
-    #include <intrin.h>
-    #elif defined(__GNUC__) && defined(__SSE4_2__)
-    #include <nmmintrin.h>
-    #endif
-  ]],[[
-    uint64_t l = 0;
-    l = _mm_crc32_u8(l, 0);
-    l = _mm_crc32_u32(l, 0);
-    l = _mm_crc32_u64(l, 0);
-    return l;
-  ]])],
- [ AC_MSG_RESULT(yes); enable_hwcrc32=yes],
- [ AC_MSG_RESULT(no)]
-)
-CXXFLAGS="$TEMP_CXXFLAGS"
-
-TEMP_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $SSE41_CXXFLAGS"
-AC_MSG_CHECKING(for SSE4.1 intrinsics)
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-    #include <stdint.h>
-    #include <immintrin.h>
-  ]],[[
-    __m128i l = _mm_set1_epi32(0);
-    return _mm_extract_epi32(l, 3);
-  ]])],
- [ AC_MSG_RESULT(yes); enable_sse41=yes; AC_DEFINE(ENABLE_SSE41, 1, [Define this symbol to build code that uses SSE4.1 intrinsics]) ],
- [ AC_MSG_RESULT(no)]
-)
-CXXFLAGS="$TEMP_CXXFLAGS"
-
-TEMP_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $AVX2_CXXFLAGS"
-AC_MSG_CHECKING(for AVX2 intrinsics)
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-    #include <stdint.h>
-    #include <immintrin.h>
-  ]],[[
-    __m256i l = _mm256_set1_epi32(0);
-    return _mm256_extract_epi32(l, 7);
-  ]])],
- [ AC_MSG_RESULT(yes); enable_avx2=yes; AC_DEFINE(ENABLE_AVX2, 1, [Define this symbol to build code that uses AVX2 intrinsics]) ],
- [ AC_MSG_RESULT(no)]
-)
-CXXFLAGS="$TEMP_CXXFLAGS"
-
-TEMP_CXXFLAGS="$CXXFLAGS"
-CXXFLAGS="$CXXFLAGS $SHANI_CXXFLAGS"
-AC_MSG_CHECKING(for SHA-NI intrinsics)
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-    #include <stdint.h>
-    #include <immintrin.h>
-  ]],[[
-    __m128i i = _mm_set1_epi32(0);
-    __m128i j = _mm_set1_epi32(1);
-    __m128i k = _mm_set1_epi32(2);
-    return _mm_extract_epi32(_mm_sha256rnds2_epu32(i, i, k), 0);
-  ]])],
- [ AC_MSG_RESULT(yes); enable_shani=yes; AC_DEFINE(ENABLE_SHANI, 1, [Define this symbol to build code that uses SHA-NI intrinsics]) ],
- [ AC_MSG_RESULT(no)]
-)
-CXXFLAGS="$TEMP_CXXFLAGS"
-
 CPPFLAGS="$CPPFLAGS -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS"
 
 AC_ARG_WITH([utils],
@@ -419,25 +253,25 @@ case $host in
      use_pkgconfig=no
 
      TARGET_OS=windows
-     AC_CHECK_LIB([mingwthrd],      [main],, AC_MSG_ERROR(libmingwthrd missing))
-     AC_CHECK_LIB([kernel32],      [main],, AC_MSG_ERROR(libkernel32 missing))
-     AC_CHECK_LIB([user32],      [main],, AC_MSG_ERROR(libuser32 missing))
-     AC_CHECK_LIB([gdi32],      [main],, AC_MSG_ERROR(libgdi32 missing))
-     AC_CHECK_LIB([comdlg32],      [main],, AC_MSG_ERROR(libcomdlg32 missing))
-     AC_CHECK_LIB([winspool],      [main],, AC_MSG_ERROR(libwinspool missing))
-     AC_CHECK_LIB([winmm],      [main],, AC_MSG_ERROR(libwinmm missing))
-     AC_CHECK_LIB([shell32],      [main],, AC_MSG_ERROR(libshell32 missing))
-     AC_CHECK_LIB([comctl32],      [main],, AC_MSG_ERROR(libcomctl32 missing))
-     AC_CHECK_LIB([ole32],      [main],, AC_MSG_ERROR(libole32 missing))
-     AC_CHECK_LIB([oleaut32],      [main],, AC_MSG_ERROR(liboleaut32 missing))
-     AC_CHECK_LIB([uuid],      [main],, AC_MSG_ERROR(libuuid missing))
-     AC_CHECK_LIB([rpcrt4],      [main],, AC_MSG_ERROR(librpcrt4 missing))
-     AC_CHECK_LIB([advapi32],      [main],, AC_MSG_ERROR(libadvapi32 missing))
-     AC_CHECK_LIB([ws2_32],      [main],, AC_MSG_ERROR(libws2_32 missing))
-     AC_CHECK_LIB([mswsock],      [main],, AC_MSG_ERROR(libmswsock missing))
-     AC_CHECK_LIB([shlwapi],      [main],, AC_MSG_ERROR(libshlwapi missing))
-     AC_CHECK_LIB([iphlpapi],      [main],, AC_MSG_ERROR(libiphlpapi missing))
-     AC_CHECK_LIB([crypt32],      [main],, AC_MSG_ERROR(libcrypt32 missing))
+     AC_CHECK_LIB([mingwthrd],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([kernel32],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([user32],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([gdi32],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([comdlg32],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([winspool],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([winmm],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([shell32],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([comctl32],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([ole32],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([oleaut32],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([uuid],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([rpcrt4],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([advapi32],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([ws2_32],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([mswsock],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([shlwapi],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([iphlpapi],      [main],, AC_MSG_ERROR(lib missing))
+     AC_CHECK_LIB([crypt32],      [main],, AC_MSG_ERROR(lib missing))
 
      # -static is interpreted by libtool, where it has a different meaning.
      # In libtool-speak, it's -all-static.
@@ -490,7 +324,6 @@ case $host in
          fi
        fi
 
-       AC_PATH_PROGS([RSVG_CONVERT], [rsvg-convert rsvg],rsvg-convert)
        AC_CHECK_PROG([BREW],brew, brew)
        if test x$BREW = xbrew; then
          dnl These Homebrew packages may be keg-only, meaning that they won't be found
@@ -541,37 +374,20 @@ case $host in
      CPPFLAGS="$CPPFLAGS -DMAC_OSX"
      OBJCXXFLAGS="$CXXFLAGS"
      ;;
-   *android*)
-     dnl make sure android stays above linux for hosts like *linux-android*
-     LEVELDB_TARGET_FLAGS="-DOS_ANDROID"
-     ;;
    *linux*)
      TARGET_OS=linux
      LEVELDB_TARGET_FLAGS="-DOS_LINUX"
      ;;
-   *kfreebsd*)
-     LEVELDB_TARGET_FLAGS="-DOS_KFREEBSD"
-     ;;
    *freebsd*)
      LEVELDB_TARGET_FLAGS="-DOS_FREEBSD"
      ;;
    *openbsd*)
      LEVELDB_TARGET_FLAGS="-DOS_OPENBSD"
      ;;
-   *netbsd*)
-     LEVELDB_TARGET_FLAGS="-DOS_NETBSD"
-     ;;
-   *dragonfly*)
-     LEVELDB_TARGET_FLAGS="-DOS_DRAGONFLYBSD"
-     ;;
-   *solaris*)
-     LEVELDB_TARGET_FLAGS="-DOS_SOLARIS"
-     ;;
-   *hpux*)
-     LEVELDB_TARGET_FLAGS="-DOS_HPUX"
-     ;;
    *)
-     AC_MSG_ERROR(Cannot build leveldb for $host. Please file a bug report.)
+     OTHER_OS=`echo ${host_os} | awk '{print toupper($0)}'`
+     AC_MSG_WARN([Guessing LevelDB OS as OS_${OTHER_OS}, please check whether this is correct, if not add an entry to configure.ac.])
+     LEVELDB_TARGET_FLAGS="-DOS_${OTHER_OS}"
      ;;
 esac
 
@@ -585,8 +401,21 @@ if test x$use_pkgconfig = xyes; then
   ])
 fi
 
-if test x$use_extended_functional_tests != xno; then
-  AC_SUBST(EXTENDED_FUNCTIONAL_TESTS, --extended)
+if test x$use_comparison_tool != xno; then
+  AC_SUBST(JAVA_COMPARISON_TOOL, $use_comparison_tool)
+fi
+
+if test x$use_comparison_tool_reorg_tests != xno; then
+  if test x$use_comparison_tool = x; then
+    AC_MSG_ERROR("comparison tool reorg tests but comparison tool was not specified")
+  fi
+  AC_SUBST(COMPARISON_TOOL_REORG_TESTS, 1)
+else
+  AC_SUBST(COMPARISON_TOOL_REORG_TESTS, 0)
+fi
+
+if test x$use_extended_rpc_tests != xno; then
+  AC_SUBST(EXTENDED_RPC_TESTS, -extended)
 fi
 
 if test x$use_lcov = xyes; then
@@ -596,23 +425,21 @@ if test x$use_lcov = xyes; then
   if test x$GCOV = x; then
     AC_MSG_ERROR("lcov testing requested but gcov not found")
   fi
+  if test x$JAVA = x; then
+    AC_MSG_ERROR("lcov testing requested but java not found")
+  fi
   if test x$PYTHON = x; then
     AC_MSG_ERROR("lcov testing requested but python not found")
   fi
   if test x$GENHTML = x; then
     AC_MSG_ERROR("lcov testing requested but genhtml not found")
   fi
+  if test x$use_comparison_tool = x; then
+    AC_MSG_ERROR("lcov testing requested but comparison tool was not specified")
+  fi
   LCOV="$LCOV --gcov-tool=$GCOV"
-  AX_CHECK_LINK_FLAG([[--coverage]], [LDFLAGS="$LDFLAGS --coverage"],
-    [AC_MSG_ERROR("lcov testing requested but --coverage linker flag does not work")])
   AX_CHECK_COMPILE_FLAG([--coverage],[CXXFLAGS="$CXXFLAGS --coverage"],
     [AC_MSG_ERROR("lcov testing requested but --coverage flag does not work")])
-  AC_DEFINE(USE_COVERAGE, 1, [Define this symbol if coverage is enabled])
-  CXXFLAGS="$CXXFLAGS -Og"
-fi
-
-if test x$use_lcov_branch != xno; then
-  AC_SUBST(LCOV_OPTS, "$LCOV_OPTS --rc lcov_branch_coverage=1")
 fi
 
 dnl Check for endianness
@@ -650,7 +477,7 @@ if test x$use_glibc_compat != xno; then
 
   #glibc absorbed clock_gettime in 2.17. librt (its previous location) is safe to link
   #in anyway for back-compat.
-  AC_CHECK_LIB([rt],[clock_gettime],, AC_MSG_ERROR(librt missing))
+  AC_CHECK_LIB([rt],[clock_gettime],, AC_MSG_ERROR(lib missing))
 
   #__fdelt_chk's params and return type have changed from long unsigned int to long int.
   # See which one is present here.
@@ -665,40 +492,16 @@ if test x$use_glibc_compat != xno; then
     [ fdelt_type="long int"])
   AC_MSG_RESULT($fdelt_type)
   AC_DEFINE_UNQUOTED(FDELT_TYPE, $fdelt_type,[parameter and return value type for __fdelt_chk])
-  AX_CHECK_LINK_FLAG([[-Wl,--wrap=__divmoddi4]], [COMPAT_LDFLAGS="$COMPAT_LDFLAGS -Wl,--wrap=__divmoddi4"])
-  AX_CHECK_LINK_FLAG([[-Wl,--wrap=log2f]], [COMPAT_LDFLAGS="$COMPAT_LDFLAGS -Wl,--wrap=log2f"])
 else
   AC_SEARCH_LIBS([clock_gettime],[rt])
 fi
 
-if test "x$enable_gprof" = xyes; then
-    dnl -pg is incompatible with -pie. Since hardening and profiling together doesn't make sense,
-    dnl we simply make them mutually exclusive here. Additionally, hardened toolchains may force
-    dnl -pie by default, in which case it needs to be turned off with -no-pie.
-
-    if test x$use_hardening = xyes; then
-        AC_MSG_ERROR(gprof profiling is not compatible with hardening. Reconfigure with --disable-hardening or --disable-gprof)
-    fi
-    use_hardening=no
-    AX_CHECK_COMPILE_FLAG([-pg],[GPROF_CXXFLAGS="-pg"],
-        [AC_MSG_ERROR(gprof profiling requested but not available)], [[$CXXFLAG_WERROR]])
-
-    AX_CHECK_LINK_FLAG([[-no-pie]], [GPROF_LDFLAGS="-no-pie"])
-    AX_CHECK_LINK_FLAG([[-pg]],[GPROF_LDFLAGS="$GPROF_LDFLAGS -pg"],
-        [AC_MSG_ERROR(gprof profiling requested but not available)], [[$GPROF_LDFLAGS]])
-fi
-
 if test x$TARGET_OS != xwindows; then
   # All windows code is PIC, forcing it on just adds useless compile warnings
   AX_CHECK_COMPILE_FLAG([-fPIC],[PIC_FLAGS="-fPIC"])
 fi
 
-# All versions of gcc that we commonly use for building are subject to bug
-# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90348. To work around that, set
-# -fstack-reuse=none for all gcc builds. (Only gcc understands this flag)
-AX_CHECK_COMPILE_FLAG([-fstack-reuse=none],[HARDENED_CXXFLAGS="$HARDENED_CXXFLAGS -fstack-reuse=none"])
 if test x$use_hardening != xno; then
-  use_hardening=yes
   AX_CHECK_COMPILE_FLAG([-Wstack-protector],[HARDENED_CXXFLAGS="$HARDENED_CXXFLAGS -Wstack-protector"])
   AX_CHECK_COMPILE_FLAG([-fstack-protector-all],[HARDENED_CXXFLAGS="$HARDENED_CXXFLAGS -fstack-protector-all"])
 
@@ -711,14 +514,17 @@ if test x$use_hardening != xno; then
 
   AX_CHECK_LINK_FLAG([[-Wl,--dynamicbase]], [HARDENED_LDFLAGS="$HARDENED_LDFLAGS -Wl,--dynamicbase"])
   AX_CHECK_LINK_FLAG([[-Wl,--nxcompat]], [HARDENED_LDFLAGS="$HARDENED_LDFLAGS -Wl,--nxcompat"])
-  AX_CHECK_LINK_FLAG([[-Wl,--high-entropy-va]], [HARDENED_LDFLAGS="$HARDENED_LDFLAGS -Wl,--high-entropy-va"])
   AX_CHECK_LINK_FLAG([[-Wl,-z,relro]], [HARDENED_LDFLAGS="$HARDENED_LDFLAGS -Wl,-z,relro"])
   AX_CHECK_LINK_FLAG([[-Wl,-z,now]], [HARDENED_LDFLAGS="$HARDENED_LDFLAGS -Wl,-z,now"])
-  AX_CHECK_LINK_FLAG([[-fPIE -pie]], [PIE_FLAGS="-fPIE"; HARDENED_LDFLAGS="$HARDENED_LDFLAGS -pie"],, [[$CXXFLAG_WERROR]])
+
+  if test x$TARGET_OS != xwindows; then
+    AX_CHECK_COMPILE_FLAG([-fPIE],[PIE_FLAGS="-fPIE"])
+    AX_CHECK_LINK_FLAG([[-pie]], [HARDENED_LDFLAGS="$HARDENED_LDFLAGS -pie"])
+  fi
 
   case $host in
     *mingw*)
-       AC_CHECK_LIB([ssp],      [main],, AC_MSG_ERROR(libssp missing))
+       AC_CHECK_LIB([ssp],      [main],, AC_MSG_ERROR(lib missing))
     ;;
   esac
 fi
@@ -732,9 +538,6 @@ AC_CHECK_HEADERS([endian.h sys/endian.h byteswap.h stdio.h stdlib.h unistd.h str
 
 AC_CHECK_DECLS([strnlen])
 
-# Check for daemon(3), unrelated to --with-daemon (although used by it)
-AC_CHECK_DECLS([daemon])
-
 AC_CHECK_DECLS([le16toh, le32toh, le64toh, htole16, htole32, htole64, be16toh, be32toh, be64toh, htobe16, htobe32, htobe64],,,
 		[#if HAVE_ENDIAN_H
                  #include <endian.h>
@@ -747,21 +550,11 @@ AC_CHECK_DECLS([bswap_16, bswap_32, bswap_64],,,
                  #include <byteswap.h>
                  #endif])
 
-AC_CHECK_DECLS([__builtin_clz, __builtin_clzl, __builtin_clzll])
-
-dnl Check for malloc_info (for memory statistics information in getmemoryinfo)
-AC_MSG_CHECKING(for getmemoryinfo)
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <malloc.h>]],
- [[ int f = malloc_info(0, NULL); ]])],
- [ AC_MSG_RESULT(yes); AC_DEFINE(HAVE_MALLOC_INFO, 1,[Define this symbol if you have malloc_info]) ],
- [ AC_MSG_RESULT(no)]
-)
-
-dnl Check for mallopt(M_ARENA_MAX) (to set glibc arenas)
-AC_MSG_CHECKING(for mallopt M_ARENA_MAX)
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <malloc.h>]],
- [[ mallopt(M_ARENA_MAX, 1); ]])],
- [ AC_MSG_RESULT(yes); AC_DEFINE(HAVE_MALLOPT_ARENA_MAX, 1,[Define this symbol if you have mallopt with M_ARENA_MAX]) ],
+dnl Check for MSG_NOSIGNAL
+AC_MSG_CHECKING(for MSG_NOSIGNAL)
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/socket.h>]],
+ [[ int f = MSG_NOSIGNAL; ]])],
+ [ AC_MSG_RESULT(yes); AC_DEFINE(HAVE_MSG_NOSIGNAL, 1,[Define this symbol if you have MSG_NOSIGNAL]) ],
  [ AC_MSG_RESULT(no)]
 )
 
@@ -782,71 +575,6 @@ AC_LINK_IFELSE([AC_LANG_SOURCE([
   ]
 )
 
-TEMP_LDFLAGS="$LDFLAGS"
-LDFLAGS="$TEMP_LDFLAGS $PTHREAD_CFLAGS"
-AC_MSG_CHECKING([for thread_local support])
-AC_LINK_IFELSE([AC_LANG_SOURCE([
-  #include <thread>
-  static thread_local int foo = 0;
-  static void run_thread() { foo++;}
-  int main(){
-  for(int i = 0; i < 10; i++) { std::thread(run_thread).detach();}
-  return foo;
-  }
-  ])],
-  [
-    AC_DEFINE(HAVE_THREAD_LOCAL,1,[Define if thread_local is supported.])
-    AC_MSG_RESULT(yes)
-  ],
-  [
-    AC_MSG_RESULT(no)
-  ]
-)
-LDFLAGS="$TEMP_LDFLAGS"
-
-# Check for different ways of gathering OS randomness
-AC_MSG_CHECKING(for Linux getrandom syscall)
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <unistd.h>
-  #include <sys/syscall.h>
-  #include <linux/random.h>]],
- [[ syscall(SYS_getrandom, nullptr, 32, 0); ]])],
- [ AC_MSG_RESULT(yes); AC_DEFINE(HAVE_SYS_GETRANDOM, 1,[Define this symbol if the Linux getrandom system call is available]) ],
- [ AC_MSG_RESULT(no)]
-)
-
-AC_MSG_CHECKING(for getentropy)
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <unistd.h>]],
- [[ getentropy(nullptr, 32) ]])],
- [ AC_MSG_RESULT(yes); AC_DEFINE(HAVE_GETENTROPY, 1,[Define this symbol if the BSD getentropy system call is available]) ],
- [ AC_MSG_RESULT(no)]
-)
-
-AC_MSG_CHECKING(for getentropy via random.h)
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <unistd.h>
- #include <sys/random.h>]],
- [[ getentropy(nullptr, 32) ]])],
- [ AC_MSG_RESULT(yes); AC_DEFINE(HAVE_GETENTROPY_RAND, 1,[Define this symbol if the BSD getentropy system call is available with sys/random.h]) ],
- [ AC_MSG_RESULT(no)]
-)
-
-AC_MSG_CHECKING(for sysctl KERN_ARND)
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/types.h>
-  #include <sys/sysctl.h>]],
- [[ static const int name[2] = {CTL_KERN, KERN_ARND};
-    sysctl(name, 2, nullptr, nullptr, nullptr, 0); ]])],
- [ AC_MSG_RESULT(yes); AC_DEFINE(HAVE_SYSCTL_ARND, 1,[Define this symbol if the BSD sysctl(KERN_ARND) is available]) ],
- [ AC_MSG_RESULT(no)]
-)
-
-AC_MSG_CHECKING(for if type char equals int8_t)
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <stdint.h>
-  #include <type_traits>]],
- [[ static_assert(std::is_same<int8_t, char>::value, ""); ]])],
- [ AC_MSG_RESULT(yes); AC_DEFINE(CHAR_EQUALS_INT8, 1,[Define this symbol if type char equals int8_t]) ],
- [ AC_MSG_RESULT(no)]
-)
-
-# Check for reduced exports
 if test x$use_reduce_exports = xyes; then
   AX_CHECK_COMPILE_FLAG([-fvisibility=hidden],[RE_CXXFLAGS="-fvisibility=hidden"],
   [AC_MSG_ERROR([Cannot set default symbol visibility. Use --disable-reduce-exports.])])
@@ -869,7 +597,7 @@ dnl Check for libminiupnpc (optional)
 if test x$use_upnp != xno; then
   AC_CHECK_HEADERS(
     [miniupnpc/miniwget.h miniupnpc/miniupnpc.h miniupnpc/upnpcommands.h miniupnpc/upnperrors.h],
-    [AC_CHECK_LIB([miniupnpc], [upnpDiscover], [MINIUPNPC_LIBS=-lminiupnpc], [have_miniupnpc=no])],
+    [AC_CHECK_LIB([miniupnpc], [main],[MINIUPNPC_LIBS=-lminiupnpc], [have_miniupnpc=no])],
     [have_miniupnpc=no]
   )
 fi
@@ -877,7 +605,7 @@ fi
 BITCOIN_QT_INIT
 
 dnl sets $bitcoin_enable_qt, $bitcoin_enable_qt_test, $bitcoin_enable_qt_dbus
-BITCOIN_QT_CONFIGURE([$use_pkgconfig])
+BITCOIN_QT_CONFIGURE([$use_pkgconfig], [qt5])
 
 if test x$build_bitcoin_utils$build_bitcoind$bitcoin_enable_qt$use_tests$use_bench = xnonononono; then
     use_boost=no
@@ -892,18 +620,12 @@ define(MINIMUM_REQUIRED_BOOST, 1.47.0)
 
 dnl Check for boost libs
 AX_BOOST_BASE([MINIMUM_REQUIRED_BOOST])
-if test x$want_boost = xno; then
-    AC_MSG_ERROR([[only libbitcoinconsensus can be built without boost]])
-fi
 AX_BOOST_SYSTEM
 AX_BOOST_FILESYSTEM
+AX_BOOST_PROGRAM_OPTIONS
 AX_BOOST_THREAD
 AX_BOOST_CHRONO
 
-dnl Boost 1.56 through 1.62 allow using std::atomic instead of its own atomic
-dnl counter implementations. In 1.63 and later the std::atomic approach is default.
-m4_pattern_allow(DBOOST_AC_USE_STD_ATOMIC) dnl otherwise it's treated like a macro
-BOOST_CPPFLAGS="-DBOOST_SP_USE_STD_ATOMIC -DBOOST_AC_USE_STD_ATOMIC $BOOST_CPPFLAGS"
 
 if test x$use_reduce_exports = xyes; then
   AC_MSG_CHECKING([for working boost reduced exports])
@@ -965,7 +687,7 @@ fi
 
 if test x$use_boost = xyes; then
 
-BOOST_LIBS="$BOOST_LDFLAGS $BOOST_SYSTEM_LIB $BOOST_FILESYSTEM_LIB $BOOST_THREAD_LIB $BOOST_CHRONO_LIB"
+BOOST_LIBS="$BOOST_LDFLAGS $BOOST_SYSTEM_LIB $BOOST_FILESYSTEM_LIB $BOOST_PROGRAM_OPTIONS_LIB $BOOST_THREAD_LIB $BOOST_CHRONO_LIB"
 
 
 dnl If boost (prior to 1.57) was built without c++11, it emulated scoped enums
@@ -984,14 +706,14 @@ TEMP_CPPFLAGS="$CPPFLAGS"
 CPPFLAGS="$CPPFLAGS $BOOST_CPPFLAGS"
 AC_MSG_CHECKING([for mismatched boost c++11 scoped enums])
 AC_LINK_IFELSE([AC_LANG_PROGRAM([[
-  #include <boost/config.hpp>
-  #include <boost/version.hpp>
+  #include "boost/config.hpp"
+  #include "boost/version.hpp"
   #if !defined(BOOST_NO_SCOPED_ENUMS) && !defined(BOOST_NO_CXX11_SCOPED_ENUMS) && BOOST_VERSION < 105700
   #define BOOST_NO_SCOPED_ENUMS
   #define BOOST_NO_CXX11_SCOPED_ENUMS
   #define CHECK
   #endif
-  #include <boost/filesystem.hpp>
+  #include "boost/filesystem.hpp"
   ]],[[
   #if defined(CHECK)
     boost::filesystem::copy_file("foo", "bar");
@@ -1061,8 +783,8 @@ if test x$use_pkgconfig = xyes; then
   m4_ifdef(
     [PKG_CHECK_MODULES],
     [
-      PKG_CHECK_MODULES([SSL], [libssl],, [AC_MSG_ERROR(openssl not found.)])
-      PKG_CHECK_MODULES([CRYPTO], [libcrypto],,[AC_MSG_ERROR(libcrypto not found.)])
+      PKG_CHECK_MODULES([SSL], [libssl],, [AC_MSG_ERROR(openssl  not found.)])
+      PKG_CHECK_MODULES([CRYPTO], [libcrypto],,[AC_MSG_ERROR(libcrypto  not found.)])
       BITCOIN_QT_CHECK([PKG_CHECK_MODULES([PROTOBUF], [protobuf], [have_protobuf=yes], [BITCOIN_QT_FAIL(libprotobuf not found)])])
       if test x$use_qr != xno; then
         BITCOIN_QT_CHECK([PKG_CHECK_MODULES([QR], [libqrencode], [have_qrencode=yes], [have_qrencode=no])])
@@ -1114,15 +836,6 @@ else
     AC_DEFINE_UNQUOTED([ENABLE_ZMQ],[0],[Define to 1 to enable ZMQ functions])
   fi
 
-  if test "x$use_zmq" = "xyes"; then
-    dnl Assume libzmq was built for static linking
-    case $host in
-      *mingw*)
-        ZMQ_CFLAGS="$ZMQ_CFLAGS -DZMQ_STATIC"
-      ;;
-    esac
-  fi
-
   BITCOIN_QT_CHECK(AC_CHECK_LIB([protobuf] ,[main],[PROTOBUF_LIBS=-lprotobuf], BITCOIN_QT_FAIL(libprotobuf not found)))
   if test x$use_qr != xno; then
     BITCOIN_QT_CHECK([AC_CHECK_LIB([qrencode], [main],[QR_LIBS=-lqrencode], [have_qrencode=no])])
@@ -1130,13 +843,6 @@ else
   fi
 fi
 
-save_CXXFLAGS="${CXXFLAGS}"
-CXXFLAGS="${CXXFLAGS} ${CRYPTO_CFLAGS} ${SSL_CFLAGS}"
-AC_CHECK_DECLS([EVP_MD_CTX_new],,,[AC_INCLUDES_DEFAULT
-#include <openssl/x509_vfy.h>
-])
-CXXFLAGS="${save_CXXFLAGS}"
-
 dnl univalue check
 
 need_bundled_univalue=yes
@@ -1152,7 +858,7 @@ if test x$system_univalue != xno ; then
     m4_ifdef(
       [PKG_CHECK_MODULES],
       [
-        PKG_CHECK_MODULES([UNIVALUE],[libunivalue >= 1.0.4],[found_univalue=yes],[true])
+        PKG_CHECK_MODULES([UNIVALUE],[libunivalue],[found_univalue=yes],[true])
       ]
     )
   else
@@ -1333,13 +1039,10 @@ AM_CONDITIONAL([ENABLE_QT_TESTS],[test x$BUILD_TEST_QT = xyes])
 AM_CONDITIONAL([ENABLE_BENCH],[test x$use_bench = xyes])
 AM_CONDITIONAL([USE_QRCODE], [test x$use_qr = xyes])
 AM_CONDITIONAL([USE_LCOV],[test x$use_lcov = xyes])
+AM_CONDITIONAL([USE_COMPARISON_TOOL],[test x$use_comparison_tool != xno])
+AM_CONDITIONAL([USE_COMPARISON_TOOL_REORG_TESTS],[test x$use_comparison_tool_reorg_test != xno])
 AM_CONDITIONAL([GLIBC_BACK_COMPAT],[test x$use_glibc_compat = xyes])
 AM_CONDITIONAL([HARDEN],[test x$use_hardening = xyes])
-AM_CONDITIONAL([ENABLE_HWCRC32],[test x$enable_hwcrc32 = xyes])
-AM_CONDITIONAL([ENABLE_SSE41],[test x$enable_sse41 = xyes])
-AM_CONDITIONAL([ENABLE_AVX2],[test x$enable_avx2 = xyes])
-AM_CONDITIONAL([ENABLE_SHANI],[test x$enable_shani = xyes])
-AM_CONDITIONAL([USE_ASM],[test x$use_asm = xyes])
 
 AC_DEFINE(CLIENT_VERSION_MAJOR, _CLIENT_VERSION_MAJOR, [Major version])
 AC_DEFINE(CLIENT_VERSION_MINOR, _CLIENT_VERSION_MINOR, [Minor version])
@@ -1366,25 +1069,11 @@ AC_SUBST(BITCOIN_CLI_NAME)
 AC_SUBST(BITCOIN_TX_NAME)
 
 AC_SUBST(RELDFLAGS)
-AC_SUBST(DEBUG_CPPFLAGS)
-AC_SUBST(WARN_CXXFLAGS)
-AC_SUBST(NOWARN_CXXFLAGS)
-AC_SUBST(DEBUG_CXXFLAGS)
-AC_SUBST(COMPAT_LDFLAGS)
-AC_SUBST(ERROR_CXXFLAGS)
-AC_SUBST(GPROF_CXXFLAGS)
-AC_SUBST(GPROF_LDFLAGS)
 AC_SUBST(HARDENED_CXXFLAGS)
 AC_SUBST(HARDENED_CPPFLAGS)
 AC_SUBST(HARDENED_LDFLAGS)
 AC_SUBST(PIC_FLAGS)
 AC_SUBST(PIE_FLAGS)
-AC_SUBST(SANITIZER_CXXFLAGS)
-AC_SUBST(SANITIZER_LDFLAGS)
-AC_SUBST(SSE42_CXXFLAGS)
-AC_SUBST(SSE41_CXXFLAGS)
-AC_SUBST(AVX2_CXXFLAGS)
-AC_SUBST(SHANI_CXXFLAGS)
 AC_SUBST(LIBTOOL_APP_LDFLAGS)
 AC_SUBST(USE_UPNP)
 AC_SUBST(USE_QRCODE)
@@ -1400,13 +1089,11 @@ AC_SUBST(EVENT_PTHREADS_LIBS)
 AC_SUBST(ZMQ_LIBS)
 AC_SUBST(PROTOBUF_LIBS)
 AC_SUBST(QR_LIBS)
-AC_CONFIG_FILES([Makefile src/Makefile doc/man/Makefile share/setup.nsi share/qt/Info.plist test/config.ini])
+AC_CONFIG_FILES([Makefile src/Makefile share/setup.nsi share/qt/Info.plist src/test/buildenv.py])
+AC_CONFIG_FILES([qa/pull-tester/run-bitcoind-for-test.sh],[chmod +x qa/pull-tester/run-bitcoind-for-test.sh])
+AC_CONFIG_FILES([qa/pull-tester/tests_config.py],[chmod +x qa/pull-tester/tests_config.py])
 AC_CONFIG_FILES([contrib/devtools/split-debug.sh],[chmod +x contrib/devtools/split-debug.sh])
-AM_COND_IF([HAVE_DOXYGEN], [AC_CONFIG_FILES([doc/Doxyfile])])
-AC_CONFIG_LINKS([contrib/filter-lcov.py:contrib/filter-lcov.py])
-AC_CONFIG_LINKS([test/functional/test_runner.py:test/functional/test_runner.py])
-AC_CONFIG_LINKS([test/util/bitcoin-util-test.py:test/util/bitcoin-util-test.py])
-AC_CONFIG_LINKS([test/util/rpcauth-test.py:test/util/rpcauth-test.py])
+AC_CONFIG_LINKS([qa/pull-tester/rpc-tests.py:qa/pull-tester/rpc-tests.py])
 
 dnl boost's m4 checks do something really nasty: they export these vars. As a
 dnl result, they leak into secp256k1's configure and crazy things happen.
@@ -1435,7 +1122,7 @@ if test x$need_bundled_univalue = xyes; then
   AC_CONFIG_SUBDIRS([src/univalue])
 fi
 
-ac_configure_args="${ac_configure_args} --disable-shared --with-pic --with-bignum=no --enable-module-recovery --disable-jni"
+ac_configure_args="${ac_configure_args} --disable-shared --with-pic --with-bignum=no --enable-module-recovery"
 AC_CONFIG_SUBDIRS([src/secp256k1])
 
 AC_OUTPUT
@@ -1454,36 +1141,7 @@ esac
 dnl Replace the BUILDDIR path with the correct Windows path if compiling on Native Windows
 case ${OS} in
    *Windows*)
-     sed  's/BUILDDIR="\/\([[a-z]]\)/BUILDDIR="\1:/'  test/config.ini > test/config-2.ini
-     mv test/config-2.ini test/config.ini
+     sed  's/BUILDDIR="\/\([[a-z]]\)/BUILDDIR="\1:/'  qa/pull-tester/tests_config.py > qa/pull-tester/tests_config-2.py
+     mv qa/pull-tester/tests_config-2.py qa/pull-tester/tests_config.py
    ;;
 esac
-
-echo
-echo "Options used to compile and link:"
-echo "  with wallet   = $enable_wallet"
-echo "  with gui / qt = $bitcoin_enable_qt"
-if test x$bitcoin_enable_qt != xno; then
-    echo "    with qr     = $use_qr"
-fi
-echo "  with zmq      = $use_zmq"
-echo "  with test     = $use_tests"
-echo "  with bench    = $use_bench"
-echo "  with upnp     = $use_upnp"
-echo "  use asm       = $use_asm"
-echo "  sanitizers    = $use_sanitizers"
-echo "  debug enabled = $enable_debug"
-echo "  gprof enabled = $enable_gprof"
-echo "  werror        = $enable_werror"
-echo
-echo "  target os     = $TARGET_OS"
-echo "  build os      = $BUILD_OS"
-echo
-echo "  CC            = $CC"
-echo "  CFLAGS        = $CFLAGS"
-echo "  CPPFLAGS      = $DEBUG_CPPFLAGS $HARDENED_CPPFLAGS $CPPFLAGS"
-echo "  CXX           = $CXX"
-echo "  CXXFLAGS      = $DEBUG_CXXFLAGS $HARDENED_CXXFLAGS $WARN_CXXFLAGS $NOWARN_CXXFLAGS $ERROR_CXXFLAGS $GPROF_CXXFLAGS $CXXFLAGS"
-echo "  LDFLAGS       = $PTHREAD_CFLAGS $HARDENED_LDFLAGS $GPROF_LDFLAGS $LDFLAGS"
-echo "  ARFLAGS       = $ARFLAGS"
-echo

contrib/README.md

@@ -1,9 +1,17 @@
+Wallet Tools
+---------------------
+
+### [SpendFrom](/contrib/spendfrom) ###
+
+Use the raw transactions API to send coins received on a particular
+address (or addresses).
+
 Repository Tools
 ---------------------
 
 ### [Developer tools](/contrib/devtools) ###
 Specific tools for developers working on this repository.
-Contains the script `github-merge.py` for merging GitHub pull requests securely and signing them using GPG.
+Contains the script `github-merge.py` for merging github pull requests securely and signing them using GPG.
 
 ### [Verify-Commits](/contrib/verify-commits) ###
 Tool to verify that every merge commit was signed by a developer using the above `github-merge.py` script.
@@ -21,13 +29,12 @@ Utility to generate the pnSeed[] array that is compiled into the client.
 Build Tools and Keys
 ---------------------
 
-### Packaging ###
-The [Debian](/contrib/debian) subfolder contains the copyright file.
-
-All other packaging related files can be found in the [bitcoin-core/packaging](https://github.com/bitcoin-core/packaging) repository.
+### [Debian](/contrib/debian) ###
+Contains files used to package bitcoind/bitcoin-qt
+for Debian-based Linux systems. If you compile bitcoind/bitcoin-qt yourself, there are some useful files here.
 
 ### [Gitian-descriptors](/contrib/gitian-descriptors) ###
-Files used during the gitian build process. For more information about gitian, see the [the Bitcoin Core documentation repository](https://github.com/bitcoin-core/docs).
+Notes on getting Gitian builds up and running using KVM.
 
 ### [Gitian-keys](/contrib/gitian-keys)
 PGP keys used for signing Bitcoin Core [Gitian release](/doc/release-process.md) results.
@@ -35,8 +42,8 @@ PGP keys used for signing Bitcoin Core [Gitian release](/doc/release-process.md)
 ### [MacDeploy](/contrib/macdeploy) ###
 Scripts and notes for Mac builds. 
 
-### [Gitian-build](/contrib/gitian-build.py) ###
-Script for running full Gitian builds.
+### [RPM](/contrib/rpm) ###
+RPM spec file for building bitcoin-core on RPM based distributions
 
 Test and Verify Tools 
 ---------------------

contrib/bitcoind.bash-completion

@@ -30,7 +30,7 @@ _bitcoind() {
             ;;
         *)
 
-            # only parse -help if sensible
+            # only parse -help if senseful
             if [[ -z "$cur" || "$cur" =~ ^- ]]; then
                 local helpopts
                 helpopts=$($bitcoind -help 2>&1 | awk '$1 ~ /^-/ { sub(/=.*/, "="); print $1 }' )

contrib/debian/README.md

@@ -0,0 +1,21 @@
+
+Debian
+====================
+This directory contains files used to package bitcoind/bitcoin-qt
+for Debian-based Linux systems. If you compile bitcoind/bitcoin-qt yourself, there are some useful files here.
+
+## bitcoin: URI support ##
+
+
+bitcoin-qt.desktop  (Gnome / Open Desktop)
+To install:
+
+	sudo desktop-file-install bitcoin-qt.desktop
+	sudo update-desktop-database
+
+If you build yourself, you will either need to modify the paths in
+the .desktop file or copy or symlink your bitcoin-qt binary to `/usr/bin`
+and the `../../share/pixmaps/bitcoin128.png` to `/usr/share/pixmaps`
+
+bitcoin-qt.protocol (KDE)
+

contrib/debian/bitcoin-qt.desktop

@@ -0,0 +1,13 @@
+[Desktop Entry]
+Encoding=UTF-8
+Name=Bitcoin Core
+Comment=Connect to the Bitcoin P2P Network
+Comment[de]=Verbinde mit dem Bitcoin peer-to-peer Netzwerk
+Comment[fr]=Bitcoin, monnaie virtuelle cryptographique pair à pair
+Comment[tr]=Bitcoin, eşten eşe kriptografik sanal para birimi
+Exec=bitcoin-qt %u
+Terminal=false
+Type=Application
+Icon=bitcoin128
+MimeType=x-scheme-handler/bitcoin;
+Categories=Office;Finance;

contrib/debian/bitcoin-qt.install

@@ -0,0 +1,6 @@
+usr/local/bin/bitcoin-qt usr/bin
+share/pixmaps/bitcoin32.xpm usr/share/pixmaps
+share/pixmaps/bitcoin16.xpm usr/share/pixmaps
+share/pixmaps/bitcoin128.png usr/share/pixmaps
+debian/bitcoin-qt.desktop usr/share/applications
+debian/bitcoin-qt.protocol usr/share/kde4/services/

contrib/debian/bitcoin-qt.lintian-overrides

@@ -0,0 +1,2 @@
+# Linked code is Expat - only Debian packaging is GPL-2+
+bitcoin-qt: possible-gpl-code-linked-with-openssl

contrib/debian/bitcoin-qt.protocol

@@ -0,0 +1,11 @@
+[Protocol]
+exec=bitcoin-qt '%u'
+protocol=bitcoin
+input=none
+output=none
+helper=true
+listing=
+reading=false
+writing=false
+makedir=false
+deleting=false

contrib/debian/bitcoin-tx.bash-completion

@@ -0,0 +1 @@
+contrib/bitcoin-tx.bash-completion	bitcoin-tx

contrib/debian/bitcoin-tx.install

@@ -0,0 +1 @@
+usr/local/bin/bitcoin-tx usr/bin

contrib/debian/bitcoind.bash-completion

@@ -0,0 +1,2 @@
+contrib/bitcoind.bash-completion	bitcoind
+contrib/bitcoin-cli.bash-completion	bitcoin-cli

contrib/debian/bitcoind.examples

@@ -0,0 +1 @@
+debian/examples/bitcoin.conf

contrib/debian/bitcoind.install

@@ -0,0 +1,2 @@
+usr/local/bin/bitcoind usr/bin
+usr/local/bin/bitcoin-cli usr/bin

contrib/debian/bitcoind.lintian-overrides

@@ -0,0 +1,2 @@
+# Linked code is Expat - only Debian packaging is GPL-2+
+bitcoind: possible-gpl-code-linked-with-openssl

contrib/debian/bitcoind.manpages

@@ -0,0 +1,3 @@
+debian/manpages/bitcoind.1
+debian/manpages/bitcoin.conf.5
+debian/manpages/bitcoin-cli.1

contrib/debian/changelog

@@ -0,0 +1,459 @@
+bitcoin (0.11.0-precise1) precise; urgency=medium
+
+  * New upstream release.
+
+ -- Matt Corallo (BlueMatt) <matt@mattcorallo.com>  Tue, 14 Jul 2015 14:39:00 -1000
+
+bitcoin (0.10.2-precise1) precise; urgency=medium
+
+  * New upstream release.
+
+ -- Matt Corallo (BlueMatt) <matt@mattcorallo.com>  Mon, 29 Jun 2015 17:33:00 -1000
+
+bitcoin (0.10.1-precise3) precise; urgency=medium
+
+  * Fix build dep (include python).
+
+ -- Matt Corallo (BlueMatt) <matt@mattcorallo.com>  Tue, 5 May 2015 09:28:00 -1000
+
+bitcoin (0.10.1-precise2) precise; urgency=medium
+
+  * Fix miniupnpc dep.
+
+ -- Matt Corallo (BlueMatt) <matt@mattcorallo.com>  Tue, 5 May 2015 00:33:00 -1000
+
+bitcoin (0.10.1-precise1) precise; urgency=medium
+
+  * New upstream release.
+
+ -- Matt Corallo (BlueMatt) <matt@mattcorallo.com>  Tue, 5 May 2015 00:07:00 -1000
+
+bitcoin (0.10.0-precise1) precise; urgency=medium
+
+  * New upstream releases.
+
+ -- Matt Corallo (BlueMatt) <matt@mattcorallo.com>  Wed, 18 Feb 2015 13:22:00 -1000
+
+bitcoin (0.9.4-precise1) precise; urgency=high
+
+  * New upstream releases.
+
+ -- Matt Corallo (laptop - only while traveling) <matt@mattcorallo.com>  Mon, 12 Jan 2015 23:30:00 -1000
+
+bitcoin (0.9.3-precise1) precise; urgency=medium
+
+  * New upstream releases.
+
+ -- Matt Corallo (BlueMatt) <matt@mattcorallo.com>  Fri, 26 Sep 2014 12:01:00 -0700
+
+bitcoin (0.9.1-precise1) precise; urgency=medium
+
+  * New upstream release.
+  * Backport pull #4019
+
+ -- Matt Corallo <matt@bluematt.me>  Sat, 19 Apr 2014 17:29:00 -0400
+
+bitcoin (0.9.0-precise1) precise; urgency=medium
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Thu, 20 Mar 2014 13:10:00 -0400
+
+bitcoin (0.8.6-precise1) precise; urgency=medium
+
+  * New upstream release.
+  * Make .desktop paths non-fixed (suggested by prusnak@github)
+
+ -- Matt Corallo <matt@bluematt.me>  Fri, 13 Dec 2013 13:31:00 -0400
+
+bitcoin (0.8.5-precise1) precise; urgency=medium
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Sun, 15 Sep 2013 14:02:00 -0400
+
+bitcoin (0.8.4-precise1) precise; urgency=medium
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Wed, 4 Sep 2013 10:25:00 -0400
+
+bitcoin (0.8.3-natty1) natty; urgency=low
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Wed, 26 Jun 2013 00:18:00 +0100
+
+bitcoin (0.8.2-natty1) natty; urgency=low
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Wed, 29 Mar 2013 23:23:00 +0100
+
+bitcoin (0.8.1-natty3) natty; urgency=low
+
+  * New pixmaps
+
+ -- Jonas Schnelli <jonas.schnelli@include7.ch>  Mon, 13 May 2013 16:14:00 +0100
+
+bitcoin (0.8.1-natty2) natty; urgency=low
+
+  * Remove dumb broken launcher script
+
+ -- Matt Corallo <matt@bluematt.me>  Sun, 24 Mar 2013 20:01:00 -0400
+
+bitcoin (0.8.1-natty1) natty; urgency=low
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Tue, 19 Mar 2013 13:03:00 -0400
+
+bitcoin (0.8.0-natty1) natty; urgency=low
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Sat, 23 Feb 2013 16:01:00 -0500
+
+bitcoin (0.7.2-natty1) natty; urgency=low
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Sat, 15 Dec 2012 10:59:00 -0400
+
+bitcoin (0.7.1-natty1) natty; urgency=low
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Wed, 24 Oct 2012 15:06:00 -0400
+
+bitcoin (0.7.0-natty1) natty; urgency=low
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Mon, 17 Sep 2012 13:45:00 +0200
+
+bitcoin (0.6.3-natty1) natty; urgency=low
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Mon, 25 Jun 2012 23:47:00 +0200
+
+bitcoin (0.6.2-natty1) natty; urgency=low
+
+  * Update package description and launch scripts.
+
+ -- Matt Corallo <matt@bluematt.me>  Sat, 2 Jun 2012 16:41:00 +0200
+
+bitcoin (0.6.2-natty0) natty; urgency=low
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Tue, 8 May 2012 16:27:00 -0500
+
+bitcoin (0.6.1-natty0) natty; urgency=low
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Sun, 6 May 2012 20:09:00 -0500
+
+bitcoin (0.6.0-natty0) natty; urgency=low
+
+  * New upstream release.
+  * Add GNOME/KDE support for bitcoin-qt's bitcoin: URI support.
+    Thanks to luke-jr for the KDE .protocol file.
+
+ -- Matt Corallo <matt@bluematt.me>  Sat, 31 Mar 2012 15:35:00 -0500
+
+bitcoin (0.5.3-natty1) natty; urgency=low
+
+  * Mark for upload to PPA.
+
+ -- Matt Corallo <matt@bluematt.me>  Wed, 14 Mar 2012 23:06:00 -0400
+
+bitcoin (0.5.3-natty0) natty; urgency=low
+
+  * New upstream release.
+
+ -- Luke Dashjr <luke+bitcoin+deb@dashjr.org>  Tue, 10 Jan 2012 15:57:00 -0500
+
+bitcoin (0.5.2-natty1) natty; urgency=low
+
+  * Remove mentions on anonymity in package descriptions and manpage.
+    These should never have been there, bitcoin isn't anonymous without
+    a ton of work that virtually no users will ever be willing and
+    capable of doing
+
+ -- Matt Corallo <matt@bluematt.me>  Sat, 7 Jan 2012 13:37:00 -0500
+
+bitcoin (0.5.2-natty0) natty; urgency=low
+
+  * New upstream release.
+
+ -- Luke Dashjr <luke+bitcoin+deb@dashjr.org>  Fri, 16 Dec 2011 17:57:00 -0500
+
+bitcoin (0.5.1-natty0) natty; urgency=low
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Fri, 16 Dec 2011 13:27:00 -0500
+
+bitcoin (0.5.0-natty0) natty; urgency=low
+
+  * New upstream release.
+
+ -- Matt Corallo <matt@bluematt.me>  Mon, 21 Nov 2011 11:32:00 -0500
+
+bitcoin (0.5.0~rc7-natty0) natty; urgency=low
+
+  * New upstream release candidate.
+
+ -- Matt Corallo <matt@bluematt.me>  Sun, 20 Nov 2011 17:08:00 -0500
+
+bitcoin (0.5.0~rc3-natty0) natty; urgency=low
+
+  * New upstream release candidate.
+  * Don't set rpcpassword for bitcoin-qt.
+
+ -- Matt Corallo <matt@bluematt.me>  Tue, 8 Nov 2011 11:56:00 -0400
+
+bitcoin (0.5.0~rc1-natty1) natty; urgency=low
+
+  * Add test_bitcoin to build test
+  * Fix clean
+  * Remove unnecessary build-dependancies
+
+ -- Matt Corallo <matt@bluematt.me>  Wed, 26 Oct 2011 14:37:18 -0400
+
+bitcoin (0.5.0~rc1-natty0) natty; urgency=low
+
+  * Mark for natty
+  * Fix broken build
+  * Fix copyright listing
+  * Remove bitcoin: URL handler until bitcoin actually has support for it (Oops)
+
+ -- Matt Corallo <matt@bluematt.me>  Wed, 26 Oct 2011 14:37:18 -0400
+
+bitcoin (0.5.0~rc1-2) experimental; urgency=low
+
+  * Add bitcoin-qt
+
+ -- Matt Corallo <matt@bluematt.me>  Tue, 25 Oct 2011 15:24:18 -0400
+
+bitcoin (0.5.0~rc1-1) experimental; urgency=low
+
+  * New upstream prerelease.
+  * Add Github as alternate upstream source in watch file.
+  * Stop build-depending on libcrypto++-dev, and drop patch 1000:
+    Upstream no longer use crypto++.
+  * Drop patch 1003: Upstream builds dynamic by default now.
+  * Update copyright file: Drop notes on longer included sources.
+
+ -- Jonas Smedegaard <dr@jones.dk>  Fri, 14 Oct 2011 00:16:18 +0200
+
+bitcoin (0.4.0-1) unstable; urgency=low
+
+  * New upstream release.
+  * Stop repackaging source tarballs: No DFSG-violating stripping left.
+  * Update copyright file:
+    + Add Github URL to Source.
+  * Drop dpkg-source local-options hint: Declared options are default
+    since dpkg-source 1.16.1.
+    + Add irc URL to Upstream-Contact.
+    + Add comment on Bitcoin Developers to catch-all Files section.
+    + Add Files sections for newly readded src/cryptopp/* (new custom
+      BSD-like license), and newly added doc/build-osx.txt and
+      src/makefile.osx (Expat).
+  * Bump debhelper compatibility level to 7.
+  * Suppress binary icns and gpg files.
+  * Enable regression tests:
+    + Build-depend on libboost-test-dev.
+    + Extend patch 1003 to also dynamically link test binary.
+    + Build and invoke test binary unless tests are disabled.
+  * Tighten build-dependency on cdbs: Recent version needed to support
+    debhelper 7.
+  * Relax build-depend unversioned on debhelper: needed version
+    satisfied even in oldstable.
+  * Stop suppress optional build-dependencies: Satisfied in stable.
+    Build-depend on devscripts (enabling copyright-check).
+
+ -- Jonas Smedegaard <dr@jones.dk>  Wed, 05 Oct 2011 01:48:53 +0200
+
+bitcoin (0.3.24~dfsg-1) unstable; urgency=low
+
+  * New upstream release.
+
+  [ Jonas Smedegaard ]
+  * Improve various usage hints:
+    + Explicitly mention in long description that bitcoind contains
+      daemon and command-line interface.
+    + Extend README.Debian with section on lack of GUI, and add primary
+      headline.
+    + Avoid installing upstream README: contains no parts relevant for
+      Debian usage.
+    Thanks to richard for suggestions (see bug#629443).
+  * Favor final releases over prereleases in rules and watch file.
+    Thanks to Jan Dittberner.
+  * Track -src (not -linux) tarballs in rules and watch file.
+    Thanks to Jan Dittberner.
+  * Drop patches 1004 and 1005 (integrated upstream) and simplify
+    CXXFLAGS in rules file.
+  * Stop stripping no longer included source-less binaries from upstream
+    tarballs.
+
+  [ Jan Dittberner ]
+  * refresh debian/patches/1000_use_system_crypto++.patch
+
+ -- Jonas Smedegaard <dr@jones.dk>  Tue, 19 Jul 2011 15:08:54 +0200
+
+bitcoin (0.3.21~dfsg-2) unstable; urgency=low
+
+  * Enable UPNP support:
+    + Drop patch 1006.
+    + Build-depend on libminiupnpc-dev.
+    Thanks to Matt Corallo.
+
+ -- Jonas Smedegaard <dr@jones.dk>  Sat, 28 May 2011 15:52:44 +0200
+
+bitcoin (0.3.21~dfsg-1) unstable; urgency=low
+
+  * New upstream release.
+  * Refresh patches.
+  * Drop patch 1002: no longer needed, as upstream use pkgconfig now.
+  * Add patch 1006 to really unset USE_UPNP as aparently intended.
+  * Adjust cleanup rule to preserve .gitignore files.
+  * Update copyright file:
+    + Bump format to draft 174 of DEP-5.
+    + Shorten comments.
+  * Bump policy compliance to standards-version 3.9.2.
+  * Shorten Vcs-Browser paragraph in control file.
+  * Fix mention daemon (not CLI tools) in short description.
+  * Stop conflicting with or replace bitcoin-cli: Only transitional, no
+    longer needed.
+  * Link against unversioned berkeleydb. Update NEWS and README.Debian
+    accordingly (and improve wording while at it).
+    Closes: Bug#621425. Thanks to Ondřej Surý.
+  * This release also implicitly updates linkage against libcrypto++,
+    which closes: bug#626953, #627024.
+  * Disable linkage against not yet Debian packaged MiniUPnP.
+  * Silence seemingly harmless noise about unused variables.
+
+ -- Jonas Smedegaard <dr@jones.dk>  Tue, 17 May 2011 15:31:24 +0200
+
+bitcoin (0.3.20.2~dfsg-2) unstable; urgency=medium
+
+  * Fix have wrapper script execute real binary (not loop executing
+    itself).
+    Closes: bug#617290. Thanks to Philippe Gauthier and Etienne Laurin.
+  * Set urgency=medium as the only (user-exposed) binary is useless
+    without this fix and has been for some time.
+
+ -- Jonas Smedegaard <dr@jones.dk>  Wed, 16 Mar 2011 09:11:06 +0100
+
+bitcoin (0.3.20.2~dfsg-1) unstable; urgency=low
+
+  * New upstream release.
+  * Fix provide and replace former package name bitcoin-cli.
+    Closes: bug#618439. Thanks to Shane Wegner.
+
+ -- Jonas Smedegaard <dr@jones.dk>  Tue, 15 Mar 2011 11:41:43 +0100
+
+bitcoin (0.3.20.01~dfsg-1) unstable; urgency=low
+
+  * New upstream release.
+
+  [ Micah Anderson ]
+  * Add myself as uploader.
+
+  [ Jonas Smedegaard ]
+  * Add wrapper for bitcoind to ease initial startup.
+  * Update patches:
+    + Drop patch 2002: Applied upstream.
+    + Add patch 1005 to add phtread linker option.
+      Closes: bug#615619. Thanks to Shane Wegner.
+    + Refresh patches.
+  * Extend copyright years in rules file header.
+  * Rewrite copyright file using draft svn166 of DEP5 format.
+  * Rename binary package to bitcoind (from bincoin-cli).
+    Closes: bug#614025. Thanks to Luke-Jr.
+
+ -- Jonas Smedegaard <dr@jones.dk>  Tue, 01 Mar 2011 15:55:04 +0100
+
+bitcoin (0.3.19~dfsg-6) unstable; urgency=low
+
+  * Fix override aggressive optimizations.
+  * Fix tighten build-dependencies to really fit backporting to Lenny:
+    + Add fallback build-dependency on libdb4.6++-dev.
+    + Tighten unversioned Boost build-dependencies to recent versions,
+      To force use of versioned Boost when backporting to Lenny.
+    ...needs more love, though: actual build fails.
+
+ -- Jonas Smedegaard <dr@jones.dk>  Mon, 17 Jan 2011 19:48:35 +0100
+
+bitcoin (0.3.19~dfsg-5) unstable; urgency=low
+
+  * Fix lower Boost fallback-build-dependencies to 1.35, really
+    available in Lenny.
+  * Correct comment in rules file regarding reason for versioned Boost
+    fallback-build-dependency.
+  * Add patch 2002 adding -mt decoration to Boost flags, to ease
+    backporting to Lenny.
+  * Respect DEB_BUILD_OPTIONS, and suppress arch-specific optimizations:
+    + Add patch 1004 to allow overriding optimization flags.
+    + Set optimization flags conditionally at build time.
+    + Drop patch 2002 unconditionally suppressing arch-optimizations.
+
+ -- Jonas Smedegaard <dr@jones.dk>  Mon, 17 Jan 2011 16:04:48 +0100
+
+bitcoin (0.3.19~dfsg-4) unstable; urgency=low
+
+  [ Micah Anderson ]
+  * Provide example bitcoin.conf.
+  * Add bitcoind(1) and bitcoin.conf(5) man pages.
+
+  [ Jonas Smedegaard ]
+  * Ease backporting:
+    + Suppress optional build-dependencies.
+    + Add fallback build-dependencies on the most recent Boost libs
+    available in Lenny (where unversioned Boost libs are missing).
+  * Add Micah as copyright holder for manpages, licensed as GPL-3+.
+  * Bump copyright format to Subversion candidate draft 162 of DEP5.
+
+ -- Jonas Smedegaard <dr@jones.dk>  Mon, 17 Jan 2011 14:00:48 +0100
+
+bitcoin (0.3.19~dfsg-3) unstable; urgency=low
+
+  * Document in copyright file files excluded from repackaged source.
+  * Update copyright file:
+    + Bump DEP5 format hint to Subversion draft rev. 153.
+    + Consistently wrap at 72 chars.
+    + Refer to GPL-2 file (not GPL symlink).
+  * Link against Berkeley DB 4.8 (not 4.7):
+    + Build-depend on libdb4.8++-dev (and on on libdb4.7++-dev).
+    + Suggest libdb4.8-util and db4.7-util.
+    + Add README.Debian note on (untested) upgrade routine.
+    + Add NEWS entry on changed db version, referring to README.Debian.
+
+ -- Jonas Smedegaard <dr@jones.dk>  Fri, 07 Jan 2011 22:50:57 +0100
+
+bitcoin (0.3.19~dfsg-2) unstable; urgency=low
+
+  * Adjust build options to use optimized miner only for amd64. Fixes
+    FTBFS on i386 (and other archs, if compiling anywhere else at all).
+  * Avoid static linking.
+  * Adjust patch 2001 to avoid only arch-specific optimizations (keep
+    -O3).
+  * Extend long description to mention disk consumption and initial use
+    of IRC.
+  All of above changes thanks to Helmuth Grohne.
+  * Add lintian override regarding OpenSSL and GPL: Linked code is Expat
+    - only Debian packaging is GPL-2+.
+
+ -- Jonas Smedegaard <dr@jones.dk>  Wed, 29 Dec 2010 00:27:54 +0100
+
+bitcoin (0.3.19~dfsg-1) unstable; urgency=low
+
+  [ Jonas Smedegaard ]
+  * Initial release.
+    Closes: bug#578157.
+
+ -- Jonas Smedegaard <dr@jones.dk>  Tue, 28 Dec 2010 15:49:22 +0100

contrib/debian/control

@@ -0,0 +1,67 @@
+Source: bitcoin
+Section: utils
+Priority: optional
+Maintainer: Jonas Smedegaard <dr@jones.dk>
+Uploaders: Micah Anderson <micah@debian.org>
+Build-Depends: debhelper,
+ devscripts,
+ automake,
+ libtool,
+ bash-completion,
+ libboost-system-dev (>> 1.35) | libboost-system1.35-dev,
+ libdb4.8++-dev,
+ libssl-dev,
+ pkg-config,
+ libminiupnpc8-dev | libminiupnpc-dev (>> 1.6),
+ libboost-filesystem-dev (>> 1.35) | libboost-filesystem1.35-dev,
+ libboost-program-options-dev (>> 1.35) | libboost-program-options1.35-dev,
+ libboost-thread-dev (>> 1.35) | libboost-thread1.35-dev,
+ libboost-test-dev (>> 1.35) | libboost-test1.35-dev,
+ qt4-qmake,
+ libqt4-dev,
+ libqrencode-dev,
+ libprotobuf-dev, protobuf-compiler,
+ python
+Standards-Version: 3.9.2
+Homepage: https://bitcoincore.org/
+Vcs-Git: git://github.com/bitcoin/bitcoin.git
+Vcs-Browser: https://github.com/bitcoin/bitcoin
+
+Package: bitcoind
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: peer-to-peer network based digital currency - daemon
+ Bitcoin is an experimental new digital currency that enables instant
+ payments to anyone, anywhere in the world. Bitcoin uses peer-to-peer
+ technology to operate with no central authority: managing transactions
+ and issuing money are carried out collectively by the network. Bitcoin Core
+ is the name of the open source software which enables the use of this currency.
+ .
+ This package provides the daemon, bitcoind, and the CLI tool
+ bitcoin-cli to interact with the daemon.
+
+Package: bitcoin-qt
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: peer-to-peer network based digital currency - Qt GUI
+ Bitcoin is an experimental new digital currency that enables instant
+ payments to anyone, anywhere in the world. Bitcoin uses peer-to-peer
+ technology to operate with no central authority: managing transactions
+ and issuing money are carried out collectively by the network. Bitcoin Core
+ is the name of the open source software which enables the use of this currency.
+ .
+ This package provides Bitcoin-Qt, a GUI for Bitcoin based on Qt.
+
+Package: bitcoin-tx
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: peer-to-peer digital currency - standalone transaction tool
+ Bitcoin is an experimental new digital currency that enables instant
+ payments to anyone, anywhere in the world. Bitcoin uses peer-to-peer
+ technology to operate with no central authority: managing transactions
+ and issuing money are carried out collectively by the network. Bitcoin Core
+ is the name of the open source software which enables the use of this currency.
+ .
+ This package provides bitcoin-tx, a command-line transaction creation
+ tool which can be used without a bitcoin daemon.  Some means of
+ exchanging minimal transaction data with peers is still required.

contrib/debian/copyright

@@ -5,7 +5,7 @@ Upstream-Contact: Satoshi Nakamoto <satoshin@gmx.com>
 Source: https://github.com/bitcoin/bitcoin
 
 Files: *
-Copyright: 2009-2018, Bitcoin Core Developers
+Copyright: 2009-2016, Bitcoin Core Developers
 License: Expat
 Comment: The Bitcoin Core Developers encompasses the current developers listed on bitcoin.org,
          as well as the numerous contributors to the project.
@@ -15,13 +15,9 @@ Copyright: 2010-2011, Jonas Smedegaard <dr@jones.dk>
            2011, Matt Corallo <matt@bluematt.me>
 License: GPL-2+
 
-Files: src/secp256k1/build-aux/m4/ax_jni_include_dir.m4
-Copyright: 2008 Don Anderson <dda@sleepycat.com>
-License: GNU-All-permissive-License
-
-Files: src/secp256k1/build-aux/m4/ax_prog_cc_for_build.m4
-Copyright: 2008 Paolo Bonzini <bonzini@gnu.org>
-License: GNU-All-permissive-License
+Files: debian/manpages/*
+Copyright: Micah Anderson <micah@debian.org>
+License: GPL-3+
 
 Files: src/qt/res/icons/add.png
        src/qt/res/icons/address-book.png
@@ -55,10 +51,7 @@ Comment: Site: https://github.com/stephenhutchings/typicons.font
 
 Files: src/qt/res/icons/connect*.png
        src/qt/res/src/connect-*.svg
-       src/qt/res/icons/network_disabled.png
-       src/qt/res/src/network_disabled.svg
 Copyright: Marco Falke
-           Luke Dashjr
 License: Expat
 Comment: Inspired by Stephan Hutchings Typicons
 
@@ -66,18 +59,14 @@ Files: src/qt/res/icons/tx_mined.png
        src/qt/res/src/mine.svg
        src/qt/res/icons/fontbigger.png
        src/qt/res/icons/fontsmaller.png
-       src/qt/res/icons/hd_disabled.png
-       src/qt/res/src/hd_disabled.svg
-       src/qt/res/icons/hd_enabled.png
-       src/qt/res/src/hd_enabled.svg
 Copyright: Jonas Schnelli
 License: Expat
 Comment:
 
 Files: src/qt/res/icons/clock*.png
        src/qt/res/icons/eye_*.png
-       src/qt/res/icons/tx_in*.png
        src/qt/res/icons/verify.png
+       src/qt/res/icons/tx_in*.png
        src/qt/res/src/clock_*.svg
        src/qt/res/src/tx_*.svg
        src/qt/res/src/verify.svg
@@ -93,11 +82,6 @@ Copyright: Bitboy, Jonas Schnelli
 License: public-domain
 Comment: Site: https://bitcointalk.org/?topic=1756.0
 
-Files: src/qt/res/icons/proxy.png
-       src/qt/res/src/proxy.svg
-Copyright: Cristian Mircea Messel
-Licese: public-domain
-
 
 License: Expat
  Permission is hereby granted, free of charge, to any person obtaining a
@@ -119,12 +103,6 @@ License: Expat
  TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
  SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 
-License: GNU-All-permissive-License
- Copying and distribution of this file, with or without modification, are
- permitted in any medium without royalty provided the copyright notice
- and this notice are preserved. This file is offered as-is, without any
- warranty.
-
 License: GPL-2+
  This program is free software; you can redistribute it and/or modify it
  under the terms of the GNU General Public License as published by the

contrib/debian/examples/bitcoin.conf

@@ -67,30 +67,9 @@
 # This option can be specified multiple times (default: bind to all interfaces)
 #rpcbind=<addr>
 
-# If no rpcpassword is set, rpc cookie auth is sought. The default `-rpccookiefile` name
-# is .cookie and found in the `-datadir` being used for bitcoind. This option is typically used
-# when the server and client are run as the same user.
-#
-# If not, you must set rpcuser and rpcpassword to secure the JSON-RPC api. The first
-# method(DEPRECATED) is to set this pair for the server and client:
+# You must set rpcuser and rpcpassword to secure the JSON-RPC api
 #rpcuser=Ulysseys
 #rpcpassword=YourSuperGreatPasswordNumber_DO_NOT_USE_THIS_OR_YOU_WILL_GET_ROBBED_385593
-#
-# The second method `rpcauth` can be added to server startup argument. It is set at initialization time
-# using the output from the script in share/rpcauth/rpcauth.py after providing a username:
-#
-# ./share/rpcauth/rpcauth.py alice
-# String to be appended to bitcoin.conf:
-# rpcauth=alice:f7efda5c189b999524f151318c0c86$d5b51b3beffbc02b724e5d095828e0bc8b2456e9ac8757ae3211a5d9b16a22ae
-# Your password:
-# DONT_USE_THIS_YOU_WILL_GET_ROBBED_8ak1gI25KFTvjovL3gAM967mies3E=
-#
-# On client-side, you add the normal user/password pair to send commands:
-#rpcuser=alice
-#rpcpassword=DONT_USE_THIS_YOU_WILL_GET_ROBBED_8ak1gI25KFTvjovL3gAM967mies3E=
-#
-# You can even add multiple entries of these to the server conf file, and client can use any of them:
-# rpcauth=bob:b2dd077cb54591a2f3139e69a897ac$4e71f08d48b4347cf8eff3815c0e25ae2e9a4340474079f55705f40574f4ec99
 
 # How many seconds bitcoin will wait for a complete RPC HTTP request.
 # after the HTTP connection is established. 
@@ -116,7 +95,12 @@
 # running on another host using this option:
 #rpcconnect=127.0.0.1
 
-# Create transactions that have enough fees so they are likely to begin confirmation within n blocks (default: 6).
+# Transaction Fee Changes in 0.10.0
+
+# Send transactions as zero-fee transactions if possible (default: 0)
+#sendfreetransactions=0
+
+# Create transactions that have enough fees (or priority) so they are likely to begin confirmation within n blocks (default: 1).
 # This setting is over-ridden by the -paytxfee option.
 #txconfirmtarget=n
 
@@ -131,13 +115,6 @@
 # be validated sooner.
 #paytxfee=0.00
 
-# Enable pruning to reduce storage requirements by deleting old blocks. 
-# This mode is incompatible with -txindex and -rescan.
-# 0 = default (no pruning).
-# 1 = allows manual pruning via RPC.
-# >=550 = target to stay under in MiB. 
-#prune=550
-
 # User interface options
 
 # Start Bitcoin minimized

contrib/debian/gbp.conf

@@ -0,0 +1,5 @@
+# Configuration file for git-buildpackage and friends
+
+[DEFAULT]
+pristine-tar = True
+sign-tags = True

contrib/debian/manpages/bitcoin-cli.1

@@ -0,0 +1,84 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.4.
+.TH BITCOIN-CLI "1" "December 2016" "bitcoin-cli v0.13.2.0" "User Commands"
+.SH NAME
+bitcoin-cli \- manual page for bitcoin-cli v0.13.2.0
+.SH DESCRIPTION
+Bitcoin Core RPC client version v0.13.2.0
+.SS "Usage:"
+.TP
+bitcoin\-cli [options] <command> [params]
+Send command to Bitcoin Core
+.TP
+bitcoin\-cli [options] help
+List commands
+.TP
+bitcoin\-cli [options] help <command>
+Get help for a command
+.SH OPTIONS
+.HP
+\-?
+.IP
+This help message
+.HP
+\fB\-conf=\fR<file>
+.IP
+Specify configuration file (default: bitcoin.conf)
+.HP
+\fB\-datadir=\fR<dir>
+.IP
+Specify data directory
+.PP
+Chain selection options:
+.HP
+\fB\-testnet\fR
+.IP
+Use the test chain
+.HP
+\fB\-regtest\fR
+.IP
+Enter regression test mode, which uses a special chain in which blocks
+can be solved instantly. This is intended for regression testing
+tools and app development.
+.HP
+\fB\-rpcconnect=\fR<ip>
+.IP
+Send commands to node running on <ip> (default: 127.0.0.1)
+.HP
+\fB\-rpcport=\fR<port>
+.IP
+Connect to JSON\-RPC on <port> (default: 8332 or testnet: 18332)
+.HP
+\fB\-rpcwait\fR
+.IP
+Wait for RPC server to start
+.HP
+\fB\-rpcuser=\fR<user>
+.IP
+Username for JSON\-RPC connections
+.HP
+\fB\-rpcpassword=\fR<pw>
+.IP
+Password for JSON\-RPC connections
+.HP
+\fB\-rpcclienttimeout=\fR<n>
+.IP
+Timeout during HTTP requests (default: 900)
+.HP
+\fB\-stdin\fR
+.IP
+Read extra arguments from standard input, one per line until EOF/Ctrl\-D
+(recommended for sensitive information such as passphrases)
+.SH COPYRIGHT
+Copyright (C) 2009-2016 The Bitcoin Core developers
+
+Please contribute if you find Bitcoin Core useful. Visit
+<https://bitcoincore.org> for further information about the software.
+The source code is available from <https://github.com/bitcoin/bitcoin>.
+
+This is experimental software.
+Distributed under the MIT software license, see the accompanying file COPYING
+or <http://www.opensource.org/licenses/mit-license.php>.
+
+This product includes software developed by the OpenSSL Project for use in the
+OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written
+by Eric Young and UPnP software written by Thomas Bernard.

contrib/debian/manpages/bitcoin-qt.1

@@ -1,54 +1,43 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.11.
-.TH BITCOIN-QT "1" "August 2019" "bitcoin-qt v0.17.2.0" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.4.
+.TH BITCOIN-QT "1" "December 2016" "bitcoin-qt v0.13.2.0" "User Commands"
 .SH NAME
-bitcoin-qt \- manual page for bitcoin-qt v0.17.2.0
-.SH SYNOPSIS
-.B bitcoin-qt
-[\fI\,command-line options\/\fR]
+bitcoin-qt \- manual page for bitcoin-qt v0.13.2.0
 .SH DESCRIPTION
-Bitcoin Core version v0.17.2.0 (64\-bit)
+Bitcoin Core version v0.13.2.0 (64\-bit)
+Usage:
+.IP
+bitcoin\-qt [command\-line options]
 .SH OPTIONS
 .HP
 \-?
 .IP
 Print this help message and exit
 .HP
+\fB\-version\fR
+.IP
+Print version and exit
+.HP
 \fB\-alertnotify=\fR<cmd>
 .IP
 Execute command when a relevant alert is received or we see a really
 long fork (%s in cmd is replaced by message)
 .HP
-\fB\-assumevalid=\fR<hex>
-.IP
-If this block is in the chain assume that it and its ancestors are valid
-and potentially skip their script verification (0 to verify all,
-default:
-0000000000000000002e63058c023a9a1de233554f28c7b21380b6c9003f36a8,
-testnet:
-0000000000000037a8cd3e06cd5edbfe9dd1dbcc5dacab279376ef7cfc2b4c75)
-.HP
 \fB\-blocknotify=\fR<cmd>
 .IP
 Execute command when the best block changes (%s in cmd is replaced by
 block hash)
 .HP
-\fB\-blockreconstructionextratxn=\fR<n>
+\fB\-checkblocks=\fR<n>
 .IP
-Extra transactions to keep in memory for compact block reconstructions
-(default: 100)
+How many blocks to check at startup (default: 6, 0 = all)
 .HP
-\fB\-blocksdir=\fR<dir>
+\fB\-checklevel=\fR<n>
 .IP
-Specify blocks directory (default: <datadir>/blocks)
+How thorough the block verification of \fB\-checkblocks\fR is (0\-4, default: 3)
 .HP
 \fB\-conf=\fR<file>
 .IP
-Specify configuration file. Relative paths will be prefixed by datadir
-location. (default: bitcoin.conf)
-.HP
-\fB\-daemon\fR
-.IP
-Run in the background as a daemon and accept commands
+Specify configuration file (default: bitcoin.conf)
 .HP
 \fB\-datadir=\fR<dir>
 .IP
@@ -56,70 +45,50 @@ Specify data directory
 .HP
 \fB\-dbcache=\fR<n>
 .IP
-Set database cache size in megabytes (4 to 16384, default: 450)
-.HP
-\fB\-debuglogfile=\fR<file>
-.IP
-Specify location of debug log file. Relative paths will be prefixed by a
-net\-specific datadir location. (\fB\-nodebuglogfile\fR to disable;
-default: debug.log)
-.HP
-\fB\-includeconf=\fR<file>
-.IP
-Specify additional configuration file, relative to the \fB\-datadir\fR path
-(only useable from configuration file, not command line)
+Set database cache size in megabytes (4 to 16384, default: 300)
 .HP
 \fB\-loadblock=\fR<file>
 .IP
 Imports blocks from external blk000??.dat file on startup
 .HP
-\fB\-maxmempool=\fR<n>
-.IP
-Keep the transaction memory pool below <n> megabytes (default: 300)
-.HP
 \fB\-maxorphantx=\fR<n>
 .IP
 Keep at most <n> unconnectable transactions in memory (default: 100)
 .HP
+\fB\-maxmempool=\fR<n>
+.IP
+Keep the transaction memory pool below <n> megabytes (default: 300)
+.HP
 \fB\-mempoolexpiry=\fR<n>
 .IP
 Do not keep transactions in the mempool longer than <n> hours (default:
-336)
+72)
 .HP
 \fB\-par=\fR<n>
 .IP
-Set the number of script verification threads (\fB\-8\fR to 16, 0 = auto, <0 =
+Set the number of script verification threads (\fB\-2\fR to 16, 0 = auto, <0 =
 leave that many cores free, default: 0)
 .HP
-\fB\-persistmempool\fR
-.IP
-Whether to save the mempool on shutdown and load on restart (default: 1)
-.HP
 \fB\-pid=\fR<file>
 .IP
-Specify pid file. Relative paths will be prefixed by a net\-specific
-datadir location. (default: bitcoind.pid)
+Specify pid file (default: bitcoind.pid)
 .HP
 \fB\-prune=\fR<n>
 .IP
-Reduce storage requirements by enabling pruning (deleting) of old
-blocks. This allows the pruneblockchain RPC to be called to
-delete specific blocks, and enables automatic pruning of old
-blocks if a target size in MiB is provided. This mode is
-incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting this
-setting requires re\-downloading the entire blockchain. (default:
-0 = disable pruning blocks, 1 = allow manual pruning via RPC,
->=550 = automatically prune block files to stay under the
-specified target size in MiB)
-.HP
-\fB\-reindex\fR
-.IP
-Rebuild chain state and block index from the blk*.dat files on disk
+Reduce storage requirements by pruning (deleting) old blocks. This mode
+is incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting
+this setting requires re\-downloading the entire blockchain.
+(default: 0 = disable pruning blocks, >550 = target size in MiB
+to use for block files)
 .HP
 \fB\-reindex\-chainstate\fR
 .IP
 Rebuild chain state from the currently indexed blocks
 .HP
+\fB\-reindex\fR
+.IP
+Rebuild chain state and block index from the blk*.dat files on disk
+.HP
 \fB\-sysperms\fR
 .IP
 Create new files with system default permissions, instead of umask 077
@@ -129,18 +98,12 @@ Create new files with system default permissions, instead of umask 077
 .IP
 Maintain a full transaction index, used by the getrawtransaction rpc
 call (default: 0)
-.HP
-\fB\-version\fR
-.IP
-Print version and exit
 .PP
 Connection options:
 .HP
 \fB\-addnode=\fR<ip>
 .IP
-Add a node to connect to and attempt to keep the connection open (see
-the `addnode` RPC command help for more info). This option can be
-specified multiple times to add multiple nodes.
+Add a node to connect to and attempt to keep the connection open
 .HP
 \fB\-banscore=\fR<n>
 .IP
@@ -158,10 +121,7 @@ for IPv6
 .HP
 \fB\-connect=\fR<ip>
 .IP
-Connect only to the specified node; \fB\-noconnect\fR disables automatic
-connections (the rules for this peer are the same as for
-\fB\-addnode\fR). This option can be specified multiple times to connect
-to multiple nodes.
+Connect only to the specified node(s)
 .HP
 \fB\-discover\fR
 .IP
@@ -175,11 +135,7 @@ Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (def
 \fB\-dnsseed\fR
 .IP
 Query for peer addresses via DNS lookup, if low on addresses (default: 1
-unless \fB\-connect\fR used)
-.HP
-\fB\-enablebip61\fR
-.IP
-Send reject messages per BIP61 (default: 1)
+unless \fB\-connect\fR)
 .HP
 \fB\-externalip=\fR<ip>
 .IP
@@ -215,51 +171,45 @@ Maximum allowed median peer time offset adjustment. Local perspective of
 time may be influenced by peers forward or backward by this
 amount. (default: 4200 seconds)
 .HP
-\fB\-maxuploadtarget=\fR<n>
-.IP
-Tries to keep outbound traffic under the given target (in MiB per 24h),
-0 = no limit (default: 0)
-.HP
 \fB\-onion=\fR<ip:port>
 .IP
-Use separate SOCKS5 proxy to reach peers via Tor hidden services, set
-\fB\-noonion\fR to disable (default: \fB\-proxy\fR)
+Use separate SOCKS5 proxy to reach peers via Tor hidden services
+(default: \fB\-proxy\fR)
 .HP
 \fB\-onlynet=\fR<net>
 .IP
-Make outgoing connections only through network <net> (ipv4, ipv6 or
-onion). Incoming connections are not affected by this option.
-This option can be specified multiple times to allow multiple
-networks.
+Only connect to nodes in network <net> (ipv4, ipv6 or onion)
+.HP
+\fB\-permitbaremultisig\fR
+.IP
+Relay non\-P2SH multisig (default: 1)
 .HP
 \fB\-peerbloomfilters\fR
 .IP
 Support filtering of blocks and transaction with bloom filters (default:
 1)
 .HP
-\fB\-permitbaremultisig\fR
-.IP
-Relay non\-P2SH multisig (default: 1)
-.HP
 \fB\-port=\fR<port>
 .IP
 Listen for connections on <port> (default: 8333 or testnet: 18333)
 .HP
 \fB\-proxy=\fR<ip:port>
 .IP
-Connect through SOCKS5 proxy, set \fB\-noproxy\fR to disable (default:
-disabled)
+Connect through SOCKS5 proxy
 .HP
 \fB\-proxyrandomize\fR
 .IP
 Randomize credentials for every proxy connection. This enables Tor
 stream isolation (default: 1)
 .HP
+\fB\-rpcserialversion\fR
+.IP
+Sets the serialization of raw transaction or block hex returned in
+non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
+.HP
 \fB\-seednode=\fR<ip>
 .IP
-Connect to a node to retrieve peer addresses, and disconnect. This
-option can be specified multiple times to connect to multiple
-nodes.
+Connect to a node to retrieve peer addresses, and disconnect
 .HP
 \fB\-timeout=\fR<n>
 .IP
@@ -274,10 +224,6 @@ Tor control port to use if onion listening enabled (default:
 .IP
 Tor control port password (default: empty)
 .HP
-\fB\-upnp\fR
-.IP
-Use UPnP to map the listening port (default: 0)
-.HP
 \fB\-whitebind=\fR<addr>
 .IP
 Bind to given address and whitelist peers connecting to it. Use
@@ -290,50 +236,37 @@ CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple
 times. Whitelisted peers cannot be DoS banned and their
 transactions are always relayed, even if they are already in the
 mempool, useful e.g. for a gateway
+.HP
+\fB\-whitelistrelay\fR
+.IP
+Accept relayed transactions received from whitelisted peers even when
+not relaying transactions (default: 1)
+.HP
+\fB\-whitelistforcerelay\fR
+.IP
+Force relay of transactions from whitelisted peers even if they violate
+local relay policy (default: 1)
+.HP
+\fB\-maxuploadtarget=\fR<n>
+.IP
+Tries to keep outbound traffic under the given target (in MiB per 24h),
+0 = no limit (default: 0)
 .PP
 Wallet options:
 .HP
-\fB\-addresstype\fR
-.IP
-What type of addresses to use ("legacy", "p2sh\-segwit", or "bech32",
-default: "p2sh\-segwit")
-.HP
-\fB\-avoidpartialspends\fR
-.IP
-Group outputs by address, selecting all or none, instead of selecting on
-a per\-output basis. Privacy is improved as an address is only
-used once (unless someone sends to it after spending from it),
-but may result in slightly higher fees as suboptimal coin
-selection may result due to the added limitation (default: 0)
-.HP
-\fB\-changetype\fR
-.IP
-What type of change to use ("legacy", "p2sh\-segwit", or "bech32").
-Default is same as \fB\-addresstype\fR, except when
-\fB\-addresstype\fR=\fI\,p2sh\-segwit\/\fR a native segwit output is used when
-sending to a native segwit address)
-.HP
 \fB\-disablewallet\fR
 .IP
 Do not load the wallet and disable wallet RPC calls
 .HP
-\fB\-discardfee=\fR<amt>
+\fB\-keypool=\fR<n>
 .IP
-The fee rate (in BTC/kB) that indicates your tolerance for discarding
-change by adding it to the fee (default: 0.0001). Note: An output
-is discarded if it is dust at this rate, but we will always
-discard up to the dust relay fee and a discard fee above that is
-limited by the fee estimate for the longest target
+Set key pool size to <n> (default: 100)
 .HP
 \fB\-fallbackfee=\fR<amt>
 .IP
 A fee rate (in BTC/kB) that will be used when fee estimation has
 insufficient data (default: 0.0002)
 .HP
-\fB\-keypool=\fR<n>
-.IP
-Set key pool size to <n> (default: 1000)
-.HP
 \fB\-mintxfee=\fR<amt>
 .IP
 Fees (in BTC/kB) smaller than this are considered zero fee for
@@ -358,39 +291,30 @@ Spend unconfirmed change when sending transactions (default: 1)
 \fB\-txconfirmtarget=\fR<n>
 .IP
 If paytxfee is not set, include enough fee so transactions begin
-confirmation on average within n blocks (default: 6)
+confirmation on average within n blocks (default: 2)
+.HP
+\fB\-usehd\fR
+.IP
+Use hierarchical deterministic key generation (HD) after BIP32. Only has
+effect during wallet creation/first start (default: 1)
 .HP
 \fB\-upgradewallet\fR
 .IP
 Upgrade wallet to latest format on startup
 .HP
-\fB\-wallet=\fR<path>
+\fB\-wallet=\fR<file>
 .IP
-Specify wallet database path. Can be specified multiple times to load
-multiple wallets. Path is interpreted relative to <walletdir> if
-it is not absolute, and will be created if it does not exist (as
-a directory containing a wallet.dat file and log files). For
-backwards compatibility this will also accept names of existing
-data files in <walletdir>.)
+Specify wallet file (within data directory) (default: wallet.dat)
 .HP
 \fB\-walletbroadcast\fR
 .IP
 Make the wallet broadcast transactions (default: 1)
 .HP
-\fB\-walletdir=\fR<dir>
-.IP
-Specify directory to hold wallets (default: <datadir>/wallets if it
-exists, otherwise <datadir>)
-.HP
 \fB\-walletnotify=\fR<cmd>
 .IP
 Execute command when a wallet transaction changes (%s in cmd is replaced
 by TxID)
 .HP
-\fB\-walletrbf\fR
-.IP
-Send transactions with full\-RBF opt\-in enabled (RPC only, default: 0)
-.HP
 \fB\-zapwallettxes=\fR<mode>
 .IP
 Delete all wallet transactions and only recover those parts of the
@@ -398,40 +322,20 @@ blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g.
 account owner and payment request information, 2 = drop tx meta
 data)
 .PP
-ZeroMQ notification options:
-.HP
-\fB\-zmqpubhashblock=\fR<address>
-.IP
-Enable publish hash block in <address>
-.HP
-\fB\-zmqpubhashtx=\fR<address>
-.IP
-Enable publish hash transaction in <address>
-.HP
-\fB\-zmqpubrawblock=\fR<address>
-.IP
-Enable publish raw block in <address>
-.HP
-\fB\-zmqpubrawtx=\fR<address>
-.IP
-Enable publish raw transaction in <address>
-.PP
 Debugging/Testing options:
 .HP
+\fB\-uacomment=\fR<cmt>
+.IP
+Append comment to the user agent string
+.HP
 \fB\-debug=\fR<category>
 .IP
-Output debugging information (default: \fB\-nodebug\fR, supplying <category> is
+Output debugging information (default: 0, supplying <category> is
 optional). If <category> is not supplied or if <category> = 1,
-output all debugging information. <category> can be: net, tor,
-mempool, http, bench, zmq, db, rpc, estimatefee, addrman,
-selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej,
-libevent, coindb, qt, leveldb.
-.HP
-\fB\-debugexclude=\fR<category>
-.IP
-Exclude debugging information for a category. Can be used in conjunction
-with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one
-or more specified categories.
+output all debugging information.<category> can be: addrman,
+alert, bench, cmpctblock, coindb, db, http, libevent, lock,
+mempool, mempoolrej, net, proxy, prune, rand, reindex, rpc,
+selectcoins, tor, zmq, qt.
 .HP
 \fB\-help\-debug\fR
 .IP
@@ -445,6 +349,11 @@ Include IP addresses in debug output (default: 0)
 .IP
 Prepend debug output with timestamp (default: 1)
 .HP
+\fB\-minrelaytxfee=\fR<amt>
+.IP
+Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
+mining and transaction creation (default: 0.00001)
+.HP
 \fB\-maxtxfee=\fR<amt>
 .IP
 Maximum total fees (in BTC) to use in a single wallet transaction or raw
@@ -453,16 +362,11 @@ transaction; setting this too low may abort large transactions
 .HP
 \fB\-printtoconsole\fR
 .IP
-Send trace/debug info to console (default: 1 when no \fB\-daemon\fR. To disable
-logging to file, set \fB\-nodebuglogfile\fR)
+Send trace/debug info to console instead of debug.log file
 .HP
 \fB\-shrinkdebugfile\fR
 .IP
 Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
-.HP
-\fB\-uacomment=\fR<cmt>
-.IP
-Append comment to the user agent string
 .PP
 Chain selection options:
 .HP
@@ -489,39 +393,62 @@ Maximum size of data in data carrier transactions we relay and mine
 \fB\-mempoolreplacement\fR
 .IP
 Enable transaction replacement in the memory pool (default: 1)
-.HP
-\fB\-minrelaytxfee=\fR<amt>
-.IP
-Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
-mining and transaction creation (default: 0.00001)
-.HP
-\fB\-whitelistforcerelay\fR
-.IP
-Force relay of transactions from whitelisted peers even if they violate
-local relay policy (default: 1)
-.HP
-\fB\-whitelistrelay\fR
-.IP
-Accept relayed transactions received from whitelisted peers even when
-not relaying transactions (default: 1)
 .PP
 Block creation options:
 .HP
 \fB\-blockmaxweight=\fR<n>
 .IP
-Set maximum BIP141 block weight (default: 3996000)
+Set maximum BIP141 block weight (default: 3000000)
 .HP
-\fB\-blockmintxfee=\fR<amt>
+\fB\-blockmaxsize=\fR<n>
 .IP
-Set lowest fee rate (in BTC/kB) for transactions to be included in block
-creation. (default: 0.00001)
+Set maximum block size in bytes (default: 750000)
+.HP
+\fB\-blockprioritysize=\fR<n>
+.IP
+Set maximum size of high\-priority/low\-fee transactions in bytes
+(default: 0)
 .PP
 RPC server options:
 .HP
+\fB\-server\fR
+.IP
+Accept command line and JSON\-RPC commands
+.HP
 \fB\-rest\fR
 .IP
 Accept public REST requests (default: 0)
 .HP
+\fB\-rpcbind=\fR<addr>
+.IP
+Bind to given address to listen for JSON\-RPC connections. Use
+[host]:port notation for IPv6. This option can be specified
+multiple times (default: bind to all interfaces)
+.HP
+\fB\-rpccookiefile=\fR<loc>
+.IP
+Location of the auth cookie (default: data dir)
+.HP
+\fB\-rpcuser=\fR<user>
+.IP
+Username for JSON\-RPC connections
+.HP
+\fB\-rpcpassword=\fR<pw>
+.IP
+Password for JSON\-RPC connections
+.HP
+\fB\-rpcauth=\fR<userpw>
+.IP
+Username and hashed password for JSON\-RPC connections. The field
+<userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
+canonical python script is included in share/rpcuser. This option
+can be specified multiple times
+.HP
+\fB\-rpcport=\fR<port>
+.IP
+Listen for JSON\-RPC connections on <port> (default: 8332 or testnet:
+18332)
+.HP
 \fB\-rpcallowip=\fR<ip>
 .IP
 Allow JSON\-RPC connections from specified source. Valid for <ip> are a
@@ -529,54 +456,9 @@ single IP (e.g. 1.2.3.4), a network/netmask (e.g.
 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
 option can be specified multiple times
 .HP
-\fB\-rpcauth=\fR<userpw>
-.IP
-Username and hashed password for JSON\-RPC connections. The field
-<userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
-canonical python script is included in share/rpcauth. The client
-then connects normally using the
-rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
-option can be specified multiple times
-.HP
-\fB\-rpcbind=\fR<addr>[:port]
-.IP
-Bind to given address to listen for JSON\-RPC connections. This option is
-ignored unless \fB\-rpcallowip\fR is also passed. Port is optional and
-overrides \fB\-rpcport\fR. Use [host]:port notation for IPv6. This
-option can be specified multiple times (default: 127.0.0.1 and
-::1 i.e., localhost, or if \fB\-rpcallowip\fR has been specified,
-0.0.0.0 and :: i.e., all addresses)
-.HP
-\fB\-rpccookiefile=\fR<loc>
-.IP
-Location of the auth cookie. Relative paths will be prefixed by a
-net\-specific datadir location. (default: data dir)
-.HP
-\fB\-rpcpassword=\fR<pw>
-.IP
-Password for JSON\-RPC connections
-.HP
-\fB\-rpcport=\fR<port>
-.IP
-Listen for JSON\-RPC connections on <port> (default: 8332 or testnet:
-18332)
-.HP
-\fB\-rpcserialversion\fR
-.IP
-Sets the serialization of raw transaction or block hex returned in
-non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
-.HP
 \fB\-rpcthreads=\fR<n>
 .IP
 Set the number of threads to service RPC calls (default: 4)
-.HP
-\fB\-rpcuser=\fR<user>
-.IP
-Username for JSON\-RPC connections
-.HP
-\fB\-server\fR
-.IP
-Accept command line and JSON\-RPC commands
 .PP
 UI Options:
 .HP
@@ -592,10 +474,6 @@ Set language, for example "de_DE" (default: system locale)
 .IP
 Start minimized
 .HP
-\fB\-resetguisettings\fR
-.IP
-Reset all settings changed in the GUI
-.HP
 \fB\-rootcertificates=\fR<file>
 .IP
 Set SSL root certificates for payment request (default: \fB\-system\-\fR)
@@ -603,8 +481,12 @@ Set SSL root certificates for payment request (default: \fB\-system\-\fR)
 \fB\-splash\fR
 .IP
 Show splash screen on startup (default: 1)
+.HP
+\fB\-resetguisettings\fR
+.IP
+Reset all settings changed in the GUI
 .SH COPYRIGHT
-Copyright (C) 2009-2018 The Bitcoin Core developers
+Copyright (C) 2009-2016 The Bitcoin Core developers
 
 Please contribute if you find Bitcoin Core useful. Visit
 <https://bitcoincore.org> for further information about the software.
@@ -612,8 +494,8 @@ The source code is available from <https://github.com/bitcoin/bitcoin>.
 
 This is experimental software.
 Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+or <http://www.opensource.org/licenses/mit-license.php>.
 
 This product includes software developed by the OpenSSL Project for use in the
-OpenSSL Toolkit <https://www.openssl.org> and cryptographic software written by
-Eric Young and UPnP software written by Thomas Bernard.
+OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written
+by Eric Young and UPnP software written by Thomas Bernard.

contrib/debian/manpages/bitcoin-tx.1

@@ -1,15 +1,16 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.11.
-.TH BITCOIN-TX "1" "August 2019" "bitcoin-tx v0.17.2.0" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.4.
+.TH BITCOIN-TX "1" "December 2016" "bitcoin-tx v0.13.2.0" "User Commands"
 .SH NAME
-bitcoin-tx \- manual page for bitcoin-tx v0.17.2.0
-.SH SYNOPSIS
-.B bitcoin-tx
-[\fI\,options\/\fR] \fI\,<hex-tx> \/\fR[\fI\,commands\/\fR]  \fI\,Update hex-encoded bitcoin transaction\/\fR
-.br
-.B bitcoin-tx
-[\fI\,options\/\fR] \fI\,-create \/\fR[\fI\,commands\/\fR]   \fI\,Create hex-encoded bitcoin transaction\/\fR
+bitcoin-tx \- manual page for bitcoin-tx v0.13.2.0
 .SH DESCRIPTION
-Bitcoin Core bitcoin\-tx utility version v0.17.2.0
+Bitcoin Core bitcoin\-tx utility version v0.13.2.0
+.SS "Usage:"
+.TP
+bitcoin\-tx [options] <hex\-tx> [commands]
+Update hex\-encoded bitcoin transaction
+.TP
+bitcoin\-tx [options] \fB\-create\fR [commands]
+Create hex\-encoded bitcoin transaction
 .SH OPTIONS
 .HP
 \-?
@@ -33,6 +34,12 @@ Chain selection options:
 \fB\-testnet\fR
 .IP
 Use the test chain
+.HP
+\fB\-regtest\fR
+.IP
+Enter regression test mode, which uses a special chain in which blocks
+can be solved instantly. This is intended for regression testing
+tools and app development.
 .PP
 Commands:
 .IP
@@ -64,29 +71,9 @@ outdata=[VALUE:]DATA
 .IP
 Add data\-based output to TX
 .IP
-outmultisig=VALUE:REQUIRED:PUBKEYS:PUBKEY1:PUBKEY2:....[:FLAGS]
+outscript=VALUE:SCRIPT
 .IP
-Add Pay To n\-of\-m Multi\-sig output to TX. n = REQUIRED, m = PUBKEYS.
-Optionally add the "W" flag to produce a
-pay\-to\-witness\-script\-hash output. Optionally add the "S" flag to
-wrap the output in a pay\-to\-script\-hash.
-.IP
-outpubkey=VALUE:PUBKEY[:FLAGS]
-.IP
-Add pay\-to\-pubkey output to TX. Optionally add the "W" flag to produce a
-pay\-to\-witness\-pubkey\-hash output. Optionally add the "S" flag to
-wrap the output in a pay\-to\-script\-hash.
-.IP
-outscript=VALUE:SCRIPT[:FLAGS]
-.IP
-Add raw script output to TX. Optionally add the "W" flag to produce a
-pay\-to\-witness\-script\-hash output. Optionally add the "S" flag to
-wrap the output in a pay\-to\-script\-hash.
-.IP
-replaceable(=N)
-.IP
-Set RBF opt\-in sequence number for input N (if not provided, opt\-in all
-available inputs)
+Add raw script output to TX
 .IP
 sign=SIGHASH\-FLAGS
 .IP
@@ -105,7 +92,7 @@ set=NAME:JSON\-STRING
 .IP
 Set register NAME to given JSON\-STRING
 .SH COPYRIGHT
-Copyright (C) 2009-2018 The Bitcoin Core developers
+Copyright (C) 2009-2016 The Bitcoin Core developers
 
 Please contribute if you find Bitcoin Core useful. Visit
 <https://bitcoincore.org> for further information about the software.
@@ -113,8 +100,8 @@ The source code is available from <https://github.com/bitcoin/bitcoin>.
 
 This is experimental software.
 Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+or <http://www.opensource.org/licenses/mit-license.php>.
 
 This product includes software developed by the OpenSSL Project for use in the
-OpenSSL Toolkit <https://www.openssl.org> and cryptographic software written by
-Eric Young and UPnP software written by Thomas Bernard.
+OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written
+by Eric Young and UPnP software written by Thomas Bernard.

contrib/debian/manpages/bitcoin.conf.5

@@ -0,0 +1,19 @@
+.TH BITCOIN.CONF "5" "February 2016" "bitcoin.conf 0.12"
+.SH NAME
+bitcoin.conf \- bitcoin configuration file
+.SH SYNOPSIS
+All command-line options (except for '\-conf') may be specified in a configuration file, and all configuration file options may also be specified on the command line. Command-line options override values set in the configuration file.
+.TP
+The configuration file is a list of 'setting=value' pairs, one per line, with optional comments starting with the '#' character. Please refer to bitcoind(1) for a up to date list of valid options.
+.TP
+The configuration file is not automatically created; you can create it using your favorite plain-text editor. By default, bitcoind(1) will look for a file named bitcoin.conf(5) in the bitcoin data directory, but both the data directory and the configuration file path may be changed using the '\-datadir' and '\-conf' command-line arguments.
+.SH LOCATION
+bitcoin.conf should be located in $HOME/.bitcoin
+
+.SH "SEE ALSO"
+bitcoind(1)
+.SH AUTHOR
+This manual page was written by Micah Anderson <micah@debian.org> for the Debian system (but may be used by others). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 3 or any later version published by the Free Software Foundation.
+
+On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.
+

contrib/debian/manpages/bitcoind.1

@@ -1,50 +1,44 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.11.
-.TH BITCOIND "1" "August 2019" "bitcoind v0.17.2.0" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.4.
+.TH BITCOIND "1" "December 2016" "bitcoind v0.13.2.0" "User Commands"
 .SH NAME
-bitcoind \- manual page for bitcoind v0.17.2.0
-.SH SYNOPSIS
-.B bitcoind
-[\fI\,options\/\fR]                     \fI\,Start Bitcoin Core Daemon\/\fR
+bitcoind \- manual page for bitcoind v0.13.2.0
 .SH DESCRIPTION
-Bitcoin Core Daemon version v0.17.2.0
+Bitcoin Core Daemon version v0.13.2.0
+.SS "Usage:"
+.TP
+bitcoind [options]
+Start Bitcoin Core Daemon
 .SH OPTIONS
 .HP
 \-?
 .IP
 Print this help message and exit
 .HP
+\fB\-version\fR
+.IP
+Print version and exit
+.HP
 \fB\-alertnotify=\fR<cmd>
 .IP
 Execute command when a relevant alert is received or we see a really
 long fork (%s in cmd is replaced by message)
 .HP
-\fB\-assumevalid=\fR<hex>
-.IP
-If this block is in the chain assume that it and its ancestors are valid
-and potentially skip their script verification (0 to verify all,
-default:
-0000000000000000002e63058c023a9a1de233554f28c7b21380b6c9003f36a8,
-testnet:
-0000000000000037a8cd3e06cd5edbfe9dd1dbcc5dacab279376ef7cfc2b4c75)
-.HP
 \fB\-blocknotify=\fR<cmd>
 .IP
 Execute command when the best block changes (%s in cmd is replaced by
 block hash)
 .HP
-\fB\-blockreconstructionextratxn=\fR<n>
+\fB\-checkblocks=\fR<n>
 .IP
-Extra transactions to keep in memory for compact block reconstructions
-(default: 100)
+How many blocks to check at startup (default: 6, 0 = all)
 .HP
-\fB\-blocksdir=\fR<dir>
+\fB\-checklevel=\fR<n>
 .IP
-Specify blocks directory (default: <datadir>/blocks)
+How thorough the block verification of \fB\-checkblocks\fR is (0\-4, default: 3)
 .HP
 \fB\-conf=\fR<file>
 .IP
-Specify configuration file. Relative paths will be prefixed by datadir
-location. (default: bitcoin.conf)
+Specify configuration file (default: bitcoin.conf)
 .HP
 \fB\-daemon\fR
 .IP
@@ -56,70 +50,50 @@ Specify data directory
 .HP
 \fB\-dbcache=\fR<n>
 .IP
-Set database cache size in megabytes (4 to 16384, default: 450)
-.HP
-\fB\-debuglogfile=\fR<file>
-.IP
-Specify location of debug log file. Relative paths will be prefixed by a
-net\-specific datadir location. (\fB\-nodebuglogfile\fR to disable;
-default: debug.log)
-.HP
-\fB\-includeconf=\fR<file>
-.IP
-Specify additional configuration file, relative to the \fB\-datadir\fR path
-(only useable from configuration file, not command line)
+Set database cache size in megabytes (4 to 16384, default: 300)
 .HP
 \fB\-loadblock=\fR<file>
 .IP
 Imports blocks from external blk000??.dat file on startup
 .HP
-\fB\-maxmempool=\fR<n>
-.IP
-Keep the transaction memory pool below <n> megabytes (default: 300)
-.HP
 \fB\-maxorphantx=\fR<n>
 .IP
 Keep at most <n> unconnectable transactions in memory (default: 100)
 .HP
+\fB\-maxmempool=\fR<n>
+.IP
+Keep the transaction memory pool below <n> megabytes (default: 300)
+.HP
 \fB\-mempoolexpiry=\fR<n>
 .IP
 Do not keep transactions in the mempool longer than <n> hours (default:
-336)
+72)
 .HP
 \fB\-par=\fR<n>
 .IP
-Set the number of script verification threads (\fB\-8\fR to 16, 0 = auto, <0 =
+Set the number of script verification threads (\fB\-2\fR to 16, 0 = auto, <0 =
 leave that many cores free, default: 0)
 .HP
-\fB\-persistmempool\fR
-.IP
-Whether to save the mempool on shutdown and load on restart (default: 1)
-.HP
 \fB\-pid=\fR<file>
 .IP
-Specify pid file. Relative paths will be prefixed by a net\-specific
-datadir location. (default: bitcoind.pid)
+Specify pid file (default: bitcoind.pid)
 .HP
 \fB\-prune=\fR<n>
 .IP
-Reduce storage requirements by enabling pruning (deleting) of old
-blocks. This allows the pruneblockchain RPC to be called to
-delete specific blocks, and enables automatic pruning of old
-blocks if a target size in MiB is provided. This mode is
-incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting this
-setting requires re\-downloading the entire blockchain. (default:
-0 = disable pruning blocks, 1 = allow manual pruning via RPC,
->=550 = automatically prune block files to stay under the
-specified target size in MiB)
-.HP
-\fB\-reindex\fR
-.IP
-Rebuild chain state and block index from the blk*.dat files on disk
+Reduce storage requirements by pruning (deleting) old blocks. This mode
+is incompatible with \fB\-txindex\fR and \fB\-rescan\fR. Warning: Reverting
+this setting requires re\-downloading the entire blockchain.
+(default: 0 = disable pruning blocks, >550 = target size in MiB
+to use for block files)
 .HP
 \fB\-reindex\-chainstate\fR
 .IP
 Rebuild chain state from the currently indexed blocks
 .HP
+\fB\-reindex\fR
+.IP
+Rebuild chain state and block index from the blk*.dat files on disk
+.HP
 \fB\-sysperms\fR
 .IP
 Create new files with system default permissions, instead of umask 077
@@ -129,18 +103,12 @@ Create new files with system default permissions, instead of umask 077
 .IP
 Maintain a full transaction index, used by the getrawtransaction rpc
 call (default: 0)
-.HP
-\fB\-version\fR
-.IP
-Print version and exit
 .PP
 Connection options:
 .HP
 \fB\-addnode=\fR<ip>
 .IP
-Add a node to connect to and attempt to keep the connection open (see
-the `addnode` RPC command help for more info). This option can be
-specified multiple times to add multiple nodes.
+Add a node to connect to and attempt to keep the connection open
 .HP
 \fB\-banscore=\fR<n>
 .IP
@@ -158,10 +126,7 @@ for IPv6
 .HP
 \fB\-connect=\fR<ip>
 .IP
-Connect only to the specified node; \fB\-noconnect\fR disables automatic
-connections (the rules for this peer are the same as for
-\fB\-addnode\fR). This option can be specified multiple times to connect
-to multiple nodes.
+Connect only to the specified node(s)
 .HP
 \fB\-discover\fR
 .IP
@@ -175,11 +140,7 @@ Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (def
 \fB\-dnsseed\fR
 .IP
 Query for peer addresses via DNS lookup, if low on addresses (default: 1
-unless \fB\-connect\fR used)
-.HP
-\fB\-enablebip61\fR
-.IP
-Send reject messages per BIP61 (default: 1)
+unless \fB\-connect\fR)
 .HP
 \fB\-externalip=\fR<ip>
 .IP
@@ -215,51 +176,45 @@ Maximum allowed median peer time offset adjustment. Local perspective of
 time may be influenced by peers forward or backward by this
 amount. (default: 4200 seconds)
 .HP
-\fB\-maxuploadtarget=\fR<n>
-.IP
-Tries to keep outbound traffic under the given target (in MiB per 24h),
-0 = no limit (default: 0)
-.HP
 \fB\-onion=\fR<ip:port>
 .IP
-Use separate SOCKS5 proxy to reach peers via Tor hidden services, set
-\fB\-noonion\fR to disable (default: \fB\-proxy\fR)
+Use separate SOCKS5 proxy to reach peers via Tor hidden services
+(default: \fB\-proxy\fR)
 .HP
 \fB\-onlynet=\fR<net>
 .IP
-Make outgoing connections only through network <net> (ipv4, ipv6 or
-onion). Incoming connections are not affected by this option.
-This option can be specified multiple times to allow multiple
-networks.
+Only connect to nodes in network <net> (ipv4, ipv6 or onion)
+.HP
+\fB\-permitbaremultisig\fR
+.IP
+Relay non\-P2SH multisig (default: 1)
 .HP
 \fB\-peerbloomfilters\fR
 .IP
 Support filtering of blocks and transaction with bloom filters (default:
 1)
 .HP
-\fB\-permitbaremultisig\fR
-.IP
-Relay non\-P2SH multisig (default: 1)
-.HP
 \fB\-port=\fR<port>
 .IP
 Listen for connections on <port> (default: 8333 or testnet: 18333)
 .HP
 \fB\-proxy=\fR<ip:port>
 .IP
-Connect through SOCKS5 proxy, set \fB\-noproxy\fR to disable (default:
-disabled)
+Connect through SOCKS5 proxy
 .HP
 \fB\-proxyrandomize\fR
 .IP
 Randomize credentials for every proxy connection. This enables Tor
 stream isolation (default: 1)
 .HP
+\fB\-rpcserialversion\fR
+.IP
+Sets the serialization of raw transaction or block hex returned in
+non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
+.HP
 \fB\-seednode=\fR<ip>
 .IP
-Connect to a node to retrieve peer addresses, and disconnect. This
-option can be specified multiple times to connect to multiple
-nodes.
+Connect to a node to retrieve peer addresses, and disconnect
 .HP
 \fB\-timeout=\fR<n>
 .IP
@@ -274,10 +229,6 @@ Tor control port to use if onion listening enabled (default:
 .IP
 Tor control port password (default: empty)
 .HP
-\fB\-upnp\fR
-.IP
-Use UPnP to map the listening port (default: 0)
-.HP
 \fB\-whitebind=\fR<addr>
 .IP
 Bind to given address and whitelist peers connecting to it. Use
@@ -290,50 +241,37 @@ CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple
 times. Whitelisted peers cannot be DoS banned and their
 transactions are always relayed, even if they are already in the
 mempool, useful e.g. for a gateway
+.HP
+\fB\-whitelistrelay\fR
+.IP
+Accept relayed transactions received from whitelisted peers even when
+not relaying transactions (default: 1)
+.HP
+\fB\-whitelistforcerelay\fR
+.IP
+Force relay of transactions from whitelisted peers even if they violate
+local relay policy (default: 1)
+.HP
+\fB\-maxuploadtarget=\fR<n>
+.IP
+Tries to keep outbound traffic under the given target (in MiB per 24h),
+0 = no limit (default: 0)
 .PP
 Wallet options:
 .HP
-\fB\-addresstype\fR
-.IP
-What type of addresses to use ("legacy", "p2sh\-segwit", or "bech32",
-default: "p2sh\-segwit")
-.HP
-\fB\-avoidpartialspends\fR
-.IP
-Group outputs by address, selecting all or none, instead of selecting on
-a per\-output basis. Privacy is improved as an address is only
-used once (unless someone sends to it after spending from it),
-but may result in slightly higher fees as suboptimal coin
-selection may result due to the added limitation (default: 0)
-.HP
-\fB\-changetype\fR
-.IP
-What type of change to use ("legacy", "p2sh\-segwit", or "bech32").
-Default is same as \fB\-addresstype\fR, except when
-\fB\-addresstype\fR=\fI\,p2sh\-segwit\/\fR a native segwit output is used when
-sending to a native segwit address)
-.HP
 \fB\-disablewallet\fR
 .IP
 Do not load the wallet and disable wallet RPC calls
 .HP
-\fB\-discardfee=\fR<amt>
+\fB\-keypool=\fR<n>
 .IP
-The fee rate (in BTC/kB) that indicates your tolerance for discarding
-change by adding it to the fee (default: 0.0001). Note: An output
-is discarded if it is dust at this rate, but we will always
-discard up to the dust relay fee and a discard fee above that is
-limited by the fee estimate for the longest target
+Set key pool size to <n> (default: 100)
 .HP
 \fB\-fallbackfee=\fR<amt>
 .IP
 A fee rate (in BTC/kB) that will be used when fee estimation has
 insufficient data (default: 0.0002)
 .HP
-\fB\-keypool=\fR<n>
-.IP
-Set key pool size to <n> (default: 1000)
-.HP
 \fB\-mintxfee=\fR<amt>
 .IP
 Fees (in BTC/kB) smaller than this are considered zero fee for
@@ -358,39 +296,30 @@ Spend unconfirmed change when sending transactions (default: 1)
 \fB\-txconfirmtarget=\fR<n>
 .IP
 If paytxfee is not set, include enough fee so transactions begin
-confirmation on average within n blocks (default: 6)
+confirmation on average within n blocks (default: 2)
+.HP
+\fB\-usehd\fR
+.IP
+Use hierarchical deterministic key generation (HD) after BIP32. Only has
+effect during wallet creation/first start (default: 1)
 .HP
 \fB\-upgradewallet\fR
 .IP
 Upgrade wallet to latest format on startup
 .HP
-\fB\-wallet=\fR<path>
+\fB\-wallet=\fR<file>
 .IP
-Specify wallet database path. Can be specified multiple times to load
-multiple wallets. Path is interpreted relative to <walletdir> if
-it is not absolute, and will be created if it does not exist (as
-a directory containing a wallet.dat file and log files). For
-backwards compatibility this will also accept names of existing
-data files in <walletdir>.)
+Specify wallet file (within data directory) (default: wallet.dat)
 .HP
 \fB\-walletbroadcast\fR
 .IP
 Make the wallet broadcast transactions (default: 1)
 .HP
-\fB\-walletdir=\fR<dir>
-.IP
-Specify directory to hold wallets (default: <datadir>/wallets if it
-exists, otherwise <datadir>)
-.HP
 \fB\-walletnotify=\fR<cmd>
 .IP
 Execute command when a wallet transaction changes (%s in cmd is replaced
 by TxID)
 .HP
-\fB\-walletrbf\fR
-.IP
-Send transactions with full\-RBF opt\-in enabled (RPC only, default: 0)
-.HP
 \fB\-zapwallettxes=\fR<mode>
 .IP
 Delete all wallet transactions and only recover those parts of the
@@ -398,40 +327,20 @@ blockchain through \fB\-rescan\fR on startup (1 = keep tx meta data e.g.
 account owner and payment request information, 2 = drop tx meta
 data)
 .PP
-ZeroMQ notification options:
-.HP
-\fB\-zmqpubhashblock=\fR<address>
-.IP
-Enable publish hash block in <address>
-.HP
-\fB\-zmqpubhashtx=\fR<address>
-.IP
-Enable publish hash transaction in <address>
-.HP
-\fB\-zmqpubrawblock=\fR<address>
-.IP
-Enable publish raw block in <address>
-.HP
-\fB\-zmqpubrawtx=\fR<address>
-.IP
-Enable publish raw transaction in <address>
-.PP
 Debugging/Testing options:
 .HP
+\fB\-uacomment=\fR<cmt>
+.IP
+Append comment to the user agent string
+.HP
 \fB\-debug=\fR<category>
 .IP
-Output debugging information (default: \fB\-nodebug\fR, supplying <category> is
+Output debugging information (default: 0, supplying <category> is
 optional). If <category> is not supplied or if <category> = 1,
-output all debugging information. <category> can be: net, tor,
-mempool, http, bench, zmq, db, rpc, estimatefee, addrman,
-selectcoins, reindex, cmpctblock, rand, prune, proxy, mempoolrej,
-libevent, coindb, qt, leveldb.
-.HP
-\fB\-debugexclude=\fR<category>
-.IP
-Exclude debugging information for a category. Can be used in conjunction
-with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except one
-or more specified categories.
+output all debugging information.<category> can be: addrman,
+alert, bench, cmpctblock, coindb, db, http, libevent, lock,
+mempool, mempoolrej, net, proxy, prune, rand, reindex, rpc,
+selectcoins, tor, zmq.
 .HP
 \fB\-help\-debug\fR
 .IP
@@ -445,6 +354,11 @@ Include IP addresses in debug output (default: 0)
 .IP
 Prepend debug output with timestamp (default: 1)
 .HP
+\fB\-minrelaytxfee=\fR<amt>
+.IP
+Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
+mining and transaction creation (default: 0.00001)
+.HP
 \fB\-maxtxfee=\fR<amt>
 .IP
 Maximum total fees (in BTC) to use in a single wallet transaction or raw
@@ -453,16 +367,11 @@ transaction; setting this too low may abort large transactions
 .HP
 \fB\-printtoconsole\fR
 .IP
-Send trace/debug info to console (default: 1 when no \fB\-daemon\fR. To disable
-logging to file, set \fB\-nodebuglogfile\fR)
+Send trace/debug info to console instead of debug.log file
 .HP
 \fB\-shrinkdebugfile\fR
 .IP
 Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
-.HP
-\fB\-uacomment=\fR<cmt>
-.IP
-Append comment to the user agent string
 .PP
 Chain selection options:
 .HP
@@ -489,39 +398,62 @@ Maximum size of data in data carrier transactions we relay and mine
 \fB\-mempoolreplacement\fR
 .IP
 Enable transaction replacement in the memory pool (default: 1)
-.HP
-\fB\-minrelaytxfee=\fR<amt>
-.IP
-Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
-mining and transaction creation (default: 0.00001)
-.HP
-\fB\-whitelistforcerelay\fR
-.IP
-Force relay of transactions from whitelisted peers even if they violate
-local relay policy (default: 1)
-.HP
-\fB\-whitelistrelay\fR
-.IP
-Accept relayed transactions received from whitelisted peers even when
-not relaying transactions (default: 1)
 .PP
 Block creation options:
 .HP
 \fB\-blockmaxweight=\fR<n>
 .IP
-Set maximum BIP141 block weight (default: 3996000)
+Set maximum BIP141 block weight (default: 3000000)
 .HP
-\fB\-blockmintxfee=\fR<amt>
+\fB\-blockmaxsize=\fR<n>
 .IP
-Set lowest fee rate (in BTC/kB) for transactions to be included in block
-creation. (default: 0.00001)
+Set maximum block size in bytes (default: 750000)
+.HP
+\fB\-blockprioritysize=\fR<n>
+.IP
+Set maximum size of high\-priority/low\-fee transactions in bytes
+(default: 0)
 .PP
 RPC server options:
 .HP
+\fB\-server\fR
+.IP
+Accept command line and JSON\-RPC commands
+.HP
 \fB\-rest\fR
 .IP
 Accept public REST requests (default: 0)
 .HP
+\fB\-rpcbind=\fR<addr>
+.IP
+Bind to given address to listen for JSON\-RPC connections. Use
+[host]:port notation for IPv6. This option can be specified
+multiple times (default: bind to all interfaces)
+.HP
+\fB\-rpccookiefile=\fR<loc>
+.IP
+Location of the auth cookie (default: data dir)
+.HP
+\fB\-rpcuser=\fR<user>
+.IP
+Username for JSON\-RPC connections
+.HP
+\fB\-rpcpassword=\fR<pw>
+.IP
+Password for JSON\-RPC connections
+.HP
+\fB\-rpcauth=\fR<userpw>
+.IP
+Username and hashed password for JSON\-RPC connections. The field
+<userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
+canonical python script is included in share/rpcuser. This option
+can be specified multiple times
+.HP
+\fB\-rpcport=\fR<port>
+.IP
+Listen for JSON\-RPC connections on <port> (default: 8332 or testnet:
+18332)
+.HP
 \fB\-rpcallowip=\fR<ip>
 .IP
 Allow JSON\-RPC connections from specified source. Valid for <ip> are a
@@ -529,56 +461,11 @@ single IP (e.g. 1.2.3.4), a network/netmask (e.g.
 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
 option can be specified multiple times
 .HP
-\fB\-rpcauth=\fR<userpw>
-.IP
-Username and hashed password for JSON\-RPC connections. The field
-<userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
-canonical python script is included in share/rpcauth. The client
-then connects normally using the
-rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
-option can be specified multiple times
-.HP
-\fB\-rpcbind=\fR<addr>[:port]
-.IP
-Bind to given address to listen for JSON\-RPC connections. This option is
-ignored unless \fB\-rpcallowip\fR is also passed. Port is optional and
-overrides \fB\-rpcport\fR. Use [host]:port notation for IPv6. This
-option can be specified multiple times (default: 127.0.0.1 and
-::1 i.e., localhost, or if \fB\-rpcallowip\fR has been specified,
-0.0.0.0 and :: i.e., all addresses)
-.HP
-\fB\-rpccookiefile=\fR<loc>
-.IP
-Location of the auth cookie. Relative paths will be prefixed by a
-net\-specific datadir location. (default: data dir)
-.HP
-\fB\-rpcpassword=\fR<pw>
-.IP
-Password for JSON\-RPC connections
-.HP
-\fB\-rpcport=\fR<port>
-.IP
-Listen for JSON\-RPC connections on <port> (default: 8332 or testnet:
-18332)
-.HP
-\fB\-rpcserialversion\fR
-.IP
-Sets the serialization of raw transaction or block hex returned in
-non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
-.HP
 \fB\-rpcthreads=\fR<n>
 .IP
 Set the number of threads to service RPC calls (default: 4)
-.HP
-\fB\-rpcuser=\fR<user>
-.IP
-Username for JSON\-RPC connections
-.HP
-\fB\-server\fR
-.IP
-Accept command line and JSON\-RPC commands
 .SH COPYRIGHT
-Copyright (C) 2009-2018 The Bitcoin Core developers
+Copyright (C) 2009-2016 The Bitcoin Core developers
 
 Please contribute if you find Bitcoin Core useful. Visit
 <https://bitcoincore.org> for further information about the software.
@@ -586,8 +473,8 @@ The source code is available from <https://github.com/bitcoin/bitcoin>.
 
 This is experimental software.
 Distributed under the MIT software license, see the accompanying file COPYING
-or <https://opensource.org/licenses/MIT>
+or <http://www.opensource.org/licenses/mit-license.php>.
 
 This product includes software developed by the OpenSSL Project for use in the
-OpenSSL Toolkit <https://www.openssl.org> and cryptographic software written by
-Eric Young and UPnP software written by Thomas Bernard.
+OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written
+by Eric Young and UPnP software written by Thomas Bernard.

contrib/debian/patches/README

@@ -0,0 +1,3 @@
+0xxx: Grabbed from upstream development.
+1xxx: Possibly relevant for upstream adoption.
+2xxx: Only relevant for official Debian release.

contrib/debian/patches/series

@@ -0,0 +1 @@
+

contrib/debian/rules

@@ -0,0 +1,24 @@
+#!/usr/bin/make -f
+# -*- mode: makefile; coding: utf-8 -*-
+
+#DEB_MAKE_CHECK_TARGET = test_bitcoin
+#build/bitcoind::
+#	$(if $(filter nocheck,$(DEB_BUILD_OPTIONS)),,src/test_bitcoin)
+
+DEB_INSTALL_EXAMPLES_bitcoind += debian/examples/*
+DEB_INSTALL_MANPAGES_bitcoind += debian/manpages/*
+
+%:
+	dh --with bash-completion $@
+
+override_dh_auto_clean:
+	if [ -f Makefile ]; then $(MAKE) distclean; fi
+	rm -rf Makefile.in aclocal.m4 configure src/Makefile.in src/bitcoin-config.h.in src/build-aux src/qt/Makefile.in src/qt/test/Makefile.in src/test/Makefile.in
+
+# Yea, autogen should be run on the source archive, but I like doing git archive
+override_dh_auto_configure:
+	./autogen.sh
+	./configure
+
+override_dh_auto_test:
+	make check

contrib/debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

contrib/debian/watch

@@ -0,0 +1,5 @@
+# Run the "uscan" command to check for upstream updates and more.
+version=3
+# use qa.debian.org redirector; see man uscan
+opts=uversionmangle=s/(\d)(alpha|beta|rc)/$1~$2/,dversionmangle=s/~dfsg\d*// \
+ http://githubredir.debian.net/github/bitcoin/bitcoin v(.*).tar.gz

contrib/devtools/README.md

@@ -2,6 +2,17 @@ Contents
 ========
 This directory contains tools for developers working on this repository.
 
+check-doc.py
+============
+
+Check if all command line args are documented. The return value indicates the
+number of undocumented args.
+
+clang-format.py
+===============
+
+A script to format cpp source code according to [.clang-format](../../src/.clang-format). This should only be applied to new files or files which are currently not actively developed on. Also, git subtrees are not subject to formatting.
+
 clang-format-diff.py
 ===================
 
@@ -14,78 +25,37 @@ the script should be called from the git root folder as follows.
 git diff -U0 HEAD~1.. | ./contrib/devtools/clang-format-diff.py -p1 -i -v
 ```
 
-copyright\_header.py
+fix-copyright-headers.py
+========================
+
+Every year newly updated files need to have its copyright headers updated to reflect the current year.
+If you run this script from the root folder it will automatically update the year on the copyright header for all
+source files if these have a git commit from the current year.
+
+For example a file changed in 2015 (with 2015 being the current year):
+
+```// Copyright (c) 2009-2013 The Bitcoin Core developers```
+
+would be changed to:
+
+```// Copyright (c) 2009-2015 The Bitcoin Core developers```
+
+git-subtree-check.sh
 ====================
 
-Provides utilities for managing copyright headers of `The Bitcoin Core
-developers` in repository source files. It has three subcommands:
+Run this script from the root of the repository to verify that a subtree matches the contents of
+the commit it claims to have been updated to.
 
-```
-$ ./copyright_header.py report <base_directory> [verbose]
-$ ./copyright_header.py update <base_directory>
-$ ./copyright_header.py insert <file>
-```
-Running these subcommands without arguments displays a usage string.
+To use, make sure that you have fetched the upstream repository branch in which the subtree is
+maintained:
+* for `src/secp256k1`: https://github.com/bitcoin-core/secp256k1.git (branch master)
+* for `src/leveldb`: https://github.com/bitcoin-core/leveldb.git (branch bitcoin-fork)
+* for `src/univalue`: https://github.com/bitcoin-core/univalue.git (branch master)
+* for `src/crypto/ctaes`: https://github.com/bitcoin-core/ctaes.git (branch master)
 
-copyright\_header.py report \<base\_directory\> [verbose]
----------------------------------------------------------
+Usage: `git-subtree-check.sh DIR (COMMIT)`
 
-Produces a report of all copyright header notices found inside the source files
-of a repository. Useful to quickly visualize the state of the headers.
-Specifying `verbose` will list the full filenames of files of each category.
-
-copyright\_header.py update \<base\_directory\> [verbose]
----------------------------------------------------------
-Updates all the copyright headers of `The Bitcoin Core developers` which were
-changed in a year more recent than is listed. For example:
-```
-// Copyright (c) <firstYear>-<lastYear> The Bitcoin Core developers
-```
-will be updated to:
-```
-// Copyright (c) <firstYear>-<lastModifiedYear> The Bitcoin Core developers
-```
-where `<lastModifiedYear>` is obtained from the `git log` history.
-
-This subcommand also handles copyright headers that have only a single year. In
-those cases:
-```
-// Copyright (c) <year> The Bitcoin Core developers
-```
-will be updated to:
-```
-// Copyright (c) <year>-<lastModifiedYear> The Bitcoin Core developers
-```
-where the update is appropriate.
-
-copyright\_header.py insert \<file\>
-------------------------------------
-Inserts a copyright header for `The Bitcoin Core developers` at the top of the
-file in either Python or C++ style as determined by the file extension. If the
-file is a Python file and it has  `#!` starting the first line, the header is
-inserted in the line below it.
-
-The copyright dates will be set to be `<year_introduced>-<current_year>` where
-`<year_introduced>` is according to the `git log` history. If
-`<year_introduced>` is equal to `<current_year>`, it will be set as a single
-year rather than two hyphenated years.
-
-If the file already has a copyright for `The Bitcoin Core developers`, the
-script will exit.
-
-gen-manpages.sh
-===============
-
-A small script to automatically create manpages in ../../doc/man by running the release binaries with the -help option.
-This requires help2man which can be found at: https://www.gnu.org/software/help2man/
-
-With in-tree builds this tool can be run from any directory within the
-repostitory. To use this tool with out-of-tree builds set `BUILDDIR`. For
-example:
-
-```bash
-BUILDDIR=$PWD/build contrib/devtools/gen-manpages.sh
-```
+`COMMIT` may be omitted, in which case `HEAD` is used.
 
 github-merge.py
 ===============
@@ -110,7 +80,7 @@ check or whatever).
 
 This means that there are no potential race conditions (where a
 pullreq gets updated while you're reviewing it, but before you click
-merge), and when using GPG signatures, that even a compromised GitHub
+merge), and when using GPG signatures, that even a compromised github
 couldn't mess with the sources.
 
 Setup
@@ -121,14 +91,6 @@ Configuring the github-merge tool for the bitcoin repository is done in the foll
     git config githubmerge.testcmd "make -j4 check" (adapt to whatever you want to use for testing)
     git config --global user.signingkey mykeyid (if you want to GPG sign)
 
-Create and verify timestamps of merge commits
----------------------------------------------
-To create or verify timestamps on the merge commits, install the OpenTimestamps
-client via `pip3 install opentimestamps-client`. Then, dowload the gpg wrapper
-`ots-git-gpg-wrapper.sh` and set it as git's `gpg.program`. See
-[the ots git integration documentation](https://github.com/opentimestamps/opentimestamps-client/blob/master/doc/git-integration.md#usage)
-for further details.
-
 optimize-pngs.py
 ================
 
@@ -171,14 +133,3 @@ It will do the following automatically:
 - add missing translations to the build system (TODO)
 
 See doc/translation-process.md for more information.
-
-circular-dependencies.py
-========================
-
-Run this script from the root of the source tree (`src/`) to find circular dependencies in the source code.
-This looks only at which files include other files, treating the `.cpp` and `.h` file as one unit.
-
-Example usage:
-
-    cd .../src
-    ../contrib/devtools/circular-dependencies.py {*,*/*,*/*/*}.{h,cpp}

contrib/devtools/check-doc.py

@@ -0,0 +1,45 @@
+#!/usr/bin/env python
+# Copyright (c) 2015 The Bitcoin Core developers
+# Distributed under the MIT software license, see the accompanying
+# file COPYING or http://www.opensource.org/licenses/mit-license.php.
+
+'''
+This checks if all command line args are documented.
+Return value is 0 to indicate no error.
+
+Author: @MarcoFalke
+'''
+
+from subprocess import check_output
+import re
+
+FOLDER_GREP = 'src'
+FOLDER_TEST = 'src/test/'
+CMD_ROOT_DIR = '`git rev-parse --show-toplevel`/%s' % FOLDER_GREP
+CMD_GREP_ARGS = r"egrep -r -I '(map(Multi)?Args(\.count\(|\[)|Get(Bool)?Arg\()\"\-[^\"]+?\"' %s | grep -v '%s'" % (CMD_ROOT_DIR, FOLDER_TEST)
+CMD_GREP_DOCS = r"egrep -r -I 'HelpMessageOpt\(\"\-[^\"=]+?(=|\")' %s" % (CMD_ROOT_DIR)
+REGEX_ARG = re.compile(r'(?:map(?:Multi)?Args(?:\.count\(|\[)|Get(?:Bool)?Arg\()\"(\-[^\"]+?)\"')
+REGEX_DOC = re.compile(r'HelpMessageOpt\(\"(\-[^\"=]+?)(?:=|\")')
+# list unsupported, deprecated and duplicate args as they need no documentation
+SET_DOC_OPTIONAL = set(['-rpcssl', '-benchmark', '-h', '-help', '-socks', '-tor', '-debugnet', '-whitelistalwaysrelay', '-prematurewitness', '-walletprematurewitness', '-promiscuousmempoolflags', '-blockminsize'])
+
+def main():
+  used = check_output(CMD_GREP_ARGS, shell=True)
+  docd = check_output(CMD_GREP_DOCS, shell=True)
+
+  args_used = set(re.findall(REGEX_ARG,used))
+  args_docd = set(re.findall(REGEX_DOC,docd)).union(SET_DOC_OPTIONAL)
+  args_need_doc = args_used.difference(args_docd)
+  args_unknown = args_docd.difference(args_used)
+
+  print "Args used        : %s" % len(args_used)
+  print "Args documented  : %s" % len(args_docd)
+  print "Args undocumented: %s" % len(args_need_doc)
+  print args_need_doc
+  print "Args unknown     : %s" % len(args_unknown)
+  print args_unknown
+
+  exit(len(args_need_doc))
+
+if __name__ == "__main__":
+    main()

contrib/devtools/circular-dependencies.py

@@ -1,79 +0,0 @@
-#!/usr/bin/env python3
-
-import sys
-import re
-
-MAPPING = {
-    'core_read.cpp': 'core_io.cpp',
-    'core_write.cpp': 'core_io.cpp',
-}
-
-def module_name(path):
-    if path in MAPPING:
-        path = MAPPING[path]
-    if path.endswith(".h"):
-        return path[:-2]
-    if path.endswith(".c"):
-        return path[:-2]
-    if path.endswith(".cpp"):
-        return path[:-4]
-    return None
-
-files = dict()
-deps = dict()
-
-RE = re.compile("^#include <(.*)>")
-
-# Iterate over files, and create list of modules
-for arg in sys.argv[1:]:
-    module = module_name(arg)
-    if module is None:
-        print("Ignoring file %s (does not constitute module)\n" % arg)
-    else:
-        files[arg] = module
-        deps[module] = set()
-
-# Iterate again, and build list of direct dependencies for each module
-# TODO: implement support for multiple include directories
-for arg in sorted(files.keys()):
-    module = files[arg]
-    with open(arg, 'r', encoding="utf8") as f:
-        for line in f:
-            match = RE.match(line)
-            if match:
-                include = match.group(1)
-                included_module = module_name(include)
-                if included_module is not None and included_module in deps and included_module != module:
-                    deps[module].add(included_module)
-
-# Loop to find the shortest (remaining) circular dependency
-have_cycle = False
-while True:
-    shortest_cycle = None
-    for module in sorted(deps.keys()):
-        # Build the transitive closure of dependencies of module
-        closure = dict()
-        for dep in deps[module]:
-            closure[dep] = []
-        while True:
-            old_size = len(closure)
-            old_closure_keys = sorted(closure.keys())
-            for src in old_closure_keys:
-                for dep in deps[src]:
-                    if dep not in closure:
-                        closure[dep] = closure[src] + [src]
-            if len(closure) == old_size:
-                break
-        # If module is in its own transitive closure, it's a circular dependency; check if it is the shortest
-        if module in closure and (shortest_cycle is None or len(closure[module]) + 1 < len(shortest_cycle)):
-            shortest_cycle = [module] + closure[module]
-    if shortest_cycle is None:
-        break
-    # We have the shortest circular dependency; report it
-    module = shortest_cycle[0]
-    print("Circular dependency: %s" % (" -> ".join(shortest_cycle + [module])))
-    # And then break the dependency to avoid repeating in other cycles
-    deps[shortest_cycle[-1]] = deps[shortest_cycle[-1]] - set([module])
-    have_cycle = True
-
-sys.exit(1 if have_cycle else 0)

contrib/devtools/clang-format-diff.py

@@ -1,4 +1,4 @@
-#!/usr/bin/env python3
+#!/usr/bin/env python
 #
 #===- clang-format-diff.py - ClangFormat Diff Reformatter ----*- python -*--===#
 #
@@ -69,9 +69,10 @@ Example usage for git/svn users:
 
 import argparse
 import difflib
-import io
 import re
+import string
 import subprocess
+import StringIO
 import sys
 
 
@@ -127,14 +128,14 @@ def main():
         line_count = int(match.group(3))
       if line_count == 0:
         continue
-      end_line = start_line + line_count - 1
+      end_line = start_line + line_count - 1;
       lines_by_file.setdefault(filename, []).extend(
           ['-lines', str(start_line) + ':' + str(end_line)])
 
   # Reformat files containing changes in place.
-  for filename, lines in lines_by_file.items():
+  for filename, lines in lines_by_file.iteritems():
     if args.i and args.verbose:
-      print('Formatting {}'.format(filename))
+      print 'Formatting', filename
     command = [binary, filename]
     if args.i:
       command.append('-i')
@@ -142,23 +143,20 @@ def main():
       command.append('-sort-includes')
     command.extend(lines)
     command.extend(['-style=file', '-fallback-style=none'])
-    p = subprocess.Popen(command,
-                         stdout=subprocess.PIPE,
-                         stderr=None,
-                         stdin=subprocess.PIPE,
-                         universal_newlines=True)
+    p = subprocess.Popen(command, stdout=subprocess.PIPE,
+                         stderr=None, stdin=subprocess.PIPE)
     stdout, stderr = p.communicate()
     if p.returncode != 0:
-      sys.exit(p.returncode)
+      sys.exit(p.returncode);
 
     if not args.i:
-      with open(filename, encoding="utf8") as f:
+      with open(filename) as f:
         code = f.readlines()
-      formatted_code = io.StringIO(stdout).readlines()
+      formatted_code = StringIO.StringIO(stdout).readlines()
       diff = difflib.unified_diff(code, formatted_code,
                                   filename, filename,
                                   '(before formatting)', '(after formatting)')
-      diff_string = ''.join(diff)
+      diff_string = string.join(diff, '')
       if len(diff_string) > 0:
         sys.stdout.write(diff_string)
 

contrib/devtools/clang-format.py

@@ -0,0 +1,62 @@
+#!/usr/bin/env python
+'''
+Wrapper script for clang-format
+
+Copyright (c) 2015 MarcoFalke
+Copyright (c) 2015 The Bitcoin Core developers
+Distributed under the MIT software license, see the accompanying
+file COPYING or http://www.opensource.org/licenses/mit-license.php.
+'''
+
+import os
+import sys
+import subprocess
+
+tested_versions = ['3.6.0', '3.6.1', '3.6.2'] # A set of versions known to produce the same output
+accepted_file_extensions = ('.h', '.cpp') # Files to format
+
+def check_clang_format_version(clang_format_exe):
+    try:
+        output = subprocess.check_output([clang_format_exe, '-version'])
+        for ver in tested_versions:
+            if ver in output:
+                print "Detected clang-format version " + ver
+                return
+        raise RuntimeError("Untested version: " + output)
+    except Exception as e:
+        print 'Could not verify version of ' + clang_format_exe + '.'
+        raise e
+
+def check_command_line_args(argv):
+    required_args = ['{clang-format-exe}', '{files}']
+    example_args = ['clang-format-3.x', 'src/main.cpp', 'src/wallet/*']
+
+    if(len(argv) < len(required_args) + 1):
+        for word in (['Usage:', argv[0]] + required_args):
+            print word,
+        print ''
+        for word in (['E.g:', argv[0]] + example_args):
+            print word,
+        print ''
+        sys.exit(1)
+
+def run_clang_format(clang_format_exe, files):
+    for target in files:
+        if os.path.isdir(target):
+            for path, dirs, files in os.walk(target):
+                run_clang_format(clang_format_exe, (os.path.join(path, f) for f in files))
+        elif target.endswith(accepted_file_extensions):
+            print "Format " + target
+            subprocess.check_call([clang_format_exe, '-i', '-style=file', target], stdout=open(os.devnull, 'wb'), stderr=subprocess.STDOUT)
+        else:
+            print "Skip " + target
+
+def main(argv):
+    check_command_line_args(argv)
+    clang_format_exe = argv[1]
+    files = argv[2:]
+    check_clang_format_version(clang_format_exe)
+    run_clang_format(clang_format_exe, files)
+
+if __name__ == "__main__":
+    main(sys.argv)

contrib/devtools/copyright_header.py

@@ -1,612 +0,0 @@
-#!/usr/bin/env python3
-# Copyright (c) 2016-2018 The Bitcoin Core developers
-# Distributed under the MIT software license, see the accompanying
-# file COPYING or http://www.opensource.org/licenses/mit-license.php.
-
-import re
-import fnmatch
-import sys
-import subprocess
-import datetime
-import os
-
-################################################################################
-# file filtering
-################################################################################
-
-EXCLUDE = [
-    # libsecp256k1:
-    'src/secp256k1/include/secp256k1.h',
-    'src/secp256k1/include/secp256k1_ecdh.h',
-    'src/secp256k1/include/secp256k1_recovery.h',
-    'src/secp256k1/include/secp256k1_schnorr.h',
-    'src/secp256k1/src/java/org_bitcoin_NativeSecp256k1.c',
-    'src/secp256k1/src/java/org_bitcoin_NativeSecp256k1.h',
-    'src/secp256k1/src/java/org_bitcoin_Secp256k1Context.c',
-    'src/secp256k1/src/java/org_bitcoin_Secp256k1Context.h',
-    # univalue:
-    'src/univalue/test/object.cpp',
-    'src/univalue/lib/univalue_escapes.h',
-    # auto generated:
-    'src/qt/bitcoinstrings.cpp',
-    'src/chainparamsseeds.h',
-    # other external copyrights:
-    'src/tinyformat.h',
-    'src/leveldb/util/env_win.cc',
-    'src/crypto/ctaes/bench.c',
-    'test/functional/test_framework/bignum.py',
-    # python init:
-    '*__init__.py',
-]
-EXCLUDE_COMPILED = re.compile('|'.join([fnmatch.translate(m) for m in EXCLUDE]))
-
-INCLUDE = ['*.h', '*.cpp', '*.cc', '*.c', '*.py']
-INCLUDE_COMPILED = re.compile('|'.join([fnmatch.translate(m) for m in INCLUDE]))
-
-def applies_to_file(filename):
-    return ((EXCLUDE_COMPILED.match(filename) is None) and
-            (INCLUDE_COMPILED.match(filename) is not None))
-
-################################################################################
-# obtain list of files in repo according to INCLUDE and EXCLUDE
-################################################################################
-
-GIT_LS_CMD = 'git ls-files'
-
-def call_git_ls():
-    out = subprocess.check_output(GIT_LS_CMD.split(' '))
-    return [f for f in out.decode("utf-8").split('\n') if f != '']
-
-def get_filenames_to_examine():
-    filenames = call_git_ls()
-    return sorted([filename for filename in filenames if
-                   applies_to_file(filename)])
-
-################################################################################
-# define and compile regexes for the patterns we are looking for
-################################################################################
-
-
-COPYRIGHT_WITH_C = 'Copyright \(c\)'
-COPYRIGHT_WITHOUT_C = 'Copyright'
-ANY_COPYRIGHT_STYLE = '(%s|%s)' % (COPYRIGHT_WITH_C, COPYRIGHT_WITHOUT_C)
-
-YEAR = "20[0-9][0-9]"
-YEAR_RANGE = '(%s)(-%s)?' % (YEAR, YEAR)
-YEAR_LIST = '(%s)(, %s)+' % (YEAR, YEAR)
-ANY_YEAR_STYLE = '(%s|%s)' % (YEAR_RANGE, YEAR_LIST)
-ANY_COPYRIGHT_STYLE_OR_YEAR_STYLE = ("%s %s" % (ANY_COPYRIGHT_STYLE,
-                                                ANY_YEAR_STYLE))
-
-ANY_COPYRIGHT_COMPILED = re.compile(ANY_COPYRIGHT_STYLE_OR_YEAR_STYLE)
-
-def compile_copyright_regex(copyright_style, year_style, name):
-    return re.compile('%s %s %s' % (copyright_style, year_style, name))
-
-EXPECTED_HOLDER_NAMES = [
-    "Satoshi Nakamoto\n",
-    "The Bitcoin Core developers\n",
-    "The Bitcoin Core developers \n",
-    "Bitcoin Core Developers\n",
-    "the Bitcoin Core developers\n",
-    "The Bitcoin developers\n",
-    "The LevelDB Authors\. All rights reserved\.\n",
-    "BitPay Inc\.\n",
-    "BitPay, Inc\.\n",
-    "University of Illinois at Urbana-Champaign\.\n",
-    "MarcoFalke\n",
-    "Pieter Wuille\n",
-    "Pieter Wuille +\*\n",
-    "Pieter Wuille, Gregory Maxwell +\*\n",
-    "Pieter Wuille, Andrew Poelstra +\*\n",
-    "Andrew Poelstra +\*\n",
-    "Wladimir J. van der Laan\n",
-    "Jeff Garzik\n",
-    "Diederik Huys, Pieter Wuille +\*\n",
-    "Thomas Daede, Cory Fields +\*\n",
-    "Jan-Klaas Kollhof\n",
-    "Sam Rushing\n",
-    "ArtForz -- public domain half-a-node\n",
-]
-
-DOMINANT_STYLE_COMPILED = {}
-YEAR_LIST_STYLE_COMPILED = {}
-WITHOUT_C_STYLE_COMPILED = {}
-
-for holder_name in EXPECTED_HOLDER_NAMES:
-    DOMINANT_STYLE_COMPILED[holder_name] = (
-        compile_copyright_regex(COPYRIGHT_WITH_C, YEAR_RANGE, holder_name))
-    YEAR_LIST_STYLE_COMPILED[holder_name] = (
-        compile_copyright_regex(COPYRIGHT_WITH_C, YEAR_LIST, holder_name))
-    WITHOUT_C_STYLE_COMPILED[holder_name] = (
-        compile_copyright_regex(COPYRIGHT_WITHOUT_C, ANY_YEAR_STYLE,
-                                holder_name))
-
-################################################################################
-# search file contents for copyright message of particular category
-################################################################################
-
-def get_count_of_copyrights_of_any_style_any_holder(contents):
-    return len(ANY_COPYRIGHT_COMPILED.findall(contents))
-
-def file_has_dominant_style_copyright_for_holder(contents, holder_name):
-    match = DOMINANT_STYLE_COMPILED[holder_name].search(contents)
-    return match is not None
-
-def file_has_year_list_style_copyright_for_holder(contents, holder_name):
-    match = YEAR_LIST_STYLE_COMPILED[holder_name].search(contents)
-    return match is not None
-
-def file_has_without_c_style_copyright_for_holder(contents, holder_name):
-    match = WITHOUT_C_STYLE_COMPILED[holder_name].search(contents)
-    return match is not None
-
-################################################################################
-# get file info
-################################################################################
-
-def read_file(filename):
-    return open(os.path.abspath(filename), 'r', encoding="utf8").read()
-
-def gather_file_info(filename):
-    info = {}
-    info['filename'] = filename
-    c = read_file(filename)
-    info['contents'] = c
-
-    info['all_copyrights'] = get_count_of_copyrights_of_any_style_any_holder(c)
-
-    info['classified_copyrights'] = 0
-    info['dominant_style'] = {}
-    info['year_list_style'] = {}
-    info['without_c_style'] = {}
-    for holder_name in EXPECTED_HOLDER_NAMES:
-        has_dominant_style = (
-            file_has_dominant_style_copyright_for_holder(c, holder_name))
-        has_year_list_style = (
-            file_has_year_list_style_copyright_for_holder(c, holder_name))
-        has_without_c_style = (
-            file_has_without_c_style_copyright_for_holder(c, holder_name))
-        info['dominant_style'][holder_name] = has_dominant_style
-        info['year_list_style'][holder_name] = has_year_list_style
-        info['without_c_style'][holder_name] = has_without_c_style
-        if has_dominant_style or has_year_list_style or has_without_c_style:
-            info['classified_copyrights'] = info['classified_copyrights'] + 1
-    return info
-
-################################################################################
-# report execution
-################################################################################
-
-SEPARATOR = '-'.join(['' for _ in range(80)])
-
-def print_filenames(filenames, verbose):
-    if not verbose:
-        return
-    for filename in filenames:
-        print("\t%s" % filename)
-
-def print_report(file_infos, verbose):
-    print(SEPARATOR)
-    examined = [i['filename'] for i in file_infos]
-    print("%d files examined according to INCLUDE and EXCLUDE fnmatch rules" %
-          len(examined))
-    print_filenames(examined, verbose)
-
-    print(SEPARATOR)
-    print('')
-    zero_copyrights = [i['filename'] for i in file_infos if
-                       i['all_copyrights'] == 0]
-    print("%4d with zero copyrights" % len(zero_copyrights))
-    print_filenames(zero_copyrights, verbose)
-    one_copyright = [i['filename'] for i in file_infos if
-                     i['all_copyrights'] == 1]
-    print("%4d with one copyright" % len(one_copyright))
-    print_filenames(one_copyright, verbose)
-    two_copyrights = [i['filename'] for i in file_infos if
-                      i['all_copyrights'] == 2]
-    print("%4d with two copyrights" % len(two_copyrights))
-    print_filenames(two_copyrights, verbose)
-    three_copyrights = [i['filename'] for i in file_infos if
-                        i['all_copyrights'] == 3]
-    print("%4d with three copyrights" % len(three_copyrights))
-    print_filenames(three_copyrights, verbose)
-    four_or_more_copyrights = [i['filename'] for i in file_infos if
-                               i['all_copyrights'] >= 4]
-    print("%4d with four or more copyrights" % len(four_or_more_copyrights))
-    print_filenames(four_or_more_copyrights, verbose)
-    print('')
-    print(SEPARATOR)
-    print('Copyrights with dominant style:\ne.g. "Copyright (c)" and '
-          '"<year>" or "<startYear>-<endYear>":\n')
-    for holder_name in EXPECTED_HOLDER_NAMES:
-        dominant_style = [i['filename'] for i in file_infos if
-                          i['dominant_style'][holder_name]]
-        if len(dominant_style) > 0:
-            print("%4d with '%s'" % (len(dominant_style),
-                                     holder_name.replace('\n', '\\n')))
-            print_filenames(dominant_style, verbose)
-    print('')
-    print(SEPARATOR)
-    print('Copyrights with year list style:\ne.g. "Copyright (c)" and '
-          '"<year1>, <year2>, ...":\n')
-    for holder_name in EXPECTED_HOLDER_NAMES:
-        year_list_style = [i['filename'] for i in file_infos if
-                           i['year_list_style'][holder_name]]
-        if len(year_list_style) > 0:
-            print("%4d with '%s'" % (len(year_list_style),
-                                     holder_name.replace('\n', '\\n')))
-            print_filenames(year_list_style, verbose)
-    print('')
-    print(SEPARATOR)
-    print('Copyrights with no "(c)" style:\ne.g. "Copyright" and "<year>" or '
-          '"<startYear>-<endYear>":\n')
-    for holder_name in EXPECTED_HOLDER_NAMES:
-        without_c_style = [i['filename'] for i in file_infos if
-                           i['without_c_style'][holder_name]]
-        if len(without_c_style) > 0:
-            print("%4d with '%s'" % (len(without_c_style),
-                                     holder_name.replace('\n', '\\n')))
-            print_filenames(without_c_style, verbose)
-
-    print('')
-    print(SEPARATOR)
-
-    unclassified_copyrights = [i['filename'] for i in file_infos if
-                               i['classified_copyrights'] < i['all_copyrights']]
-    print("%d with unexpected copyright holder names" %
-          len(unclassified_copyrights))
-    print_filenames(unclassified_copyrights, verbose)
-    print(SEPARATOR)
-
-def exec_report(base_directory, verbose):
-    original_cwd = os.getcwd()
-    os.chdir(base_directory)
-    filenames = get_filenames_to_examine()
-    file_infos = [gather_file_info(f) for f in filenames]
-    print_report(file_infos, verbose)
-    os.chdir(original_cwd)
-
-################################################################################
-# report cmd
-################################################################################
-
-REPORT_USAGE = """
-Produces a report of all copyright header notices found inside the source files
-of a repository.
-
-Usage:
-    $ ./copyright_header.py report <base_directory> [verbose]
-
-Arguments:
-    <base_directory> - The base directory of a bitcoin source code repository.
-    [verbose] - Includes a list of every file of each subcategory in the report.
-"""
-
-def report_cmd(argv):
-    if len(argv) == 2:
-        sys.exit(REPORT_USAGE)
-
-    base_directory = argv[2]
-    if not os.path.exists(base_directory):
-        sys.exit("*** bad <base_directory>: %s" % base_directory)
-
-    if len(argv) == 3:
-        verbose = False
-    elif argv[3] == 'verbose':
-        verbose = True
-    else:
-        sys.exit("*** unknown argument: %s" % argv[2])
-
-    exec_report(base_directory, verbose)
-
-################################################################################
-# query git for year of last change
-################################################################################
-
-GIT_LOG_CMD = "git log --pretty=format:%%ai %s"
-
-def call_git_log(filename):
-    out = subprocess.check_output((GIT_LOG_CMD % filename).split(' '))
-    return out.decode("utf-8").split('\n')
-
-def get_git_change_years(filename):
-    git_log_lines = call_git_log(filename)
-    if len(git_log_lines) == 0:
-        return [datetime.date.today().year]
-    # timestamp is in ISO 8601 format. e.g. "2016-09-05 14:25:32 -0600"
-    return [line.split(' ')[0].split('-')[0] for line in git_log_lines]
-
-def get_most_recent_git_change_year(filename):
-    return max(get_git_change_years(filename))
-
-################################################################################
-# read and write to file
-################################################################################
-
-def read_file_lines(filename):
-    f = open(os.path.abspath(filename), 'r', encoding="utf8")
-    file_lines = f.readlines()
-    f.close()
-    return file_lines
-
-def write_file_lines(filename, file_lines):
-    f = open(os.path.abspath(filename), 'w', encoding="utf8")
-    f.write(''.join(file_lines))
-    f.close()
-
-################################################################################
-# update header years execution
-################################################################################
-
-COPYRIGHT = 'Copyright \(c\)'
-YEAR = "20[0-9][0-9]"
-YEAR_RANGE = '(%s)(-%s)?' % (YEAR, YEAR)
-HOLDER = 'The Bitcoin Core developers'
-UPDATEABLE_LINE_COMPILED = re.compile(' '.join([COPYRIGHT, YEAR_RANGE, HOLDER]))
-
-def get_updatable_copyright_line(file_lines):
-    index = 0
-    for line in file_lines:
-        if UPDATEABLE_LINE_COMPILED.search(line) is not None:
-            return index, line
-        index = index + 1
-    return None, None
-
-def parse_year_range(year_range):
-    year_split = year_range.split('-')
-    start_year = year_split[0]
-    if len(year_split) == 1:
-        return start_year, start_year
-    return start_year, year_split[1]
-
-def year_range_to_str(start_year, end_year):
-    if start_year == end_year:
-        return start_year
-    return "%s-%s" % (start_year, end_year)
-
-def create_updated_copyright_line(line, last_git_change_year):
-    copyright_splitter = 'Copyright (c) '
-    copyright_split = line.split(copyright_splitter)
-    # Preserve characters on line that are ahead of the start of the copyright
-    # notice - they are part of the comment block and vary from file-to-file.
-    before_copyright = copyright_split[0]
-    after_copyright = copyright_split[1]
-
-    space_split = after_copyright.split(' ')
-    year_range = space_split[0]
-    start_year, end_year = parse_year_range(year_range)
-    if end_year == last_git_change_year:
-        return line
-    return (before_copyright + copyright_splitter +
-            year_range_to_str(start_year, last_git_change_year) + ' ' +
-            ' '.join(space_split[1:]))
-
-def update_updatable_copyright(filename):
-    file_lines = read_file_lines(filename)
-    index, line = get_updatable_copyright_line(file_lines)
-    if not line:
-        print_file_action_message(filename, "No updatable copyright.")
-        return
-    last_git_change_year = get_most_recent_git_change_year(filename)
-    new_line = create_updated_copyright_line(line, last_git_change_year)
-    if line == new_line:
-        print_file_action_message(filename, "Copyright up-to-date.")
-        return
-    file_lines[index] = new_line
-    write_file_lines(filename, file_lines)
-    print_file_action_message(filename,
-                              "Copyright updated! -> %s" % last_git_change_year)
-
-def exec_update_header_year(base_directory):
-    original_cwd = os.getcwd()
-    os.chdir(base_directory)
-    for filename in get_filenames_to_examine():
-        update_updatable_copyright(filename)
-    os.chdir(original_cwd)
-
-################################################################################
-# update cmd
-################################################################################
-
-UPDATE_USAGE = """
-Updates all the copyright headers of "The Bitcoin Core developers" which were
-changed in a year more recent than is listed. For example:
-
-// Copyright (c) <firstYear>-<lastYear> The Bitcoin Core developers
-
-will be updated to:
-
-// Copyright (c) <firstYear>-<lastModifiedYear> The Bitcoin Core developers
-
-where <lastModifiedYear> is obtained from the 'git log' history.
-
-This subcommand also handles copyright headers that have only a single year. In those cases:
-
-// Copyright (c) <year> The Bitcoin Core developers
-
-will be updated to:
-
-// Copyright (c) <year>-<lastModifiedYear> The Bitcoin Core developers
-
-where the update is appropriate.
-
-Usage:
-    $ ./copyright_header.py update <base_directory>
-
-Arguments:
-    <base_directory> - The base directory of a bitcoin source code repository.
-"""
-
-def print_file_action_message(filename, action):
-    print("%-52s %s" % (filename, action))
-
-def update_cmd(argv):
-    if len(argv) != 3:
-        sys.exit(UPDATE_USAGE)
-
-    base_directory = argv[2]
-    if not os.path.exists(base_directory):
-        sys.exit("*** bad base_directory: %s" % base_directory)
-    exec_update_header_year(base_directory)
-
-################################################################################
-# inserted copyright header format
-################################################################################
-
-def get_header_lines(header, start_year, end_year):
-    lines = header.split('\n')[1:-1]
-    lines[0] = lines[0] % year_range_to_str(start_year, end_year)
-    return [line + '\n' for line in lines]
-
-CPP_HEADER = '''
-// Copyright (c) %s The Bitcoin Core developers
-// Distributed under the MIT software license, see the accompanying
-// file COPYING or http://www.opensource.org/licenses/mit-license.php.
-'''
-
-def get_cpp_header_lines_to_insert(start_year, end_year):
-    return reversed(get_header_lines(CPP_HEADER, start_year, end_year))
-
-PYTHON_HEADER = '''
-# Copyright (c) %s The Bitcoin Core developers
-# Distributed under the MIT software license, see the accompanying
-# file COPYING or http://www.opensource.org/licenses/mit-license.php.
-'''
-
-def get_python_header_lines_to_insert(start_year, end_year):
-    return reversed(get_header_lines(PYTHON_HEADER, start_year, end_year))
-
-################################################################################
-# query git for year of last change
-################################################################################
-
-def get_git_change_year_range(filename):
-    years = get_git_change_years(filename)
-    return min(years), max(years)
-
-################################################################################
-# check for existing core copyright
-################################################################################
-
-def file_already_has_core_copyright(file_lines):
-    index, _ = get_updatable_copyright_line(file_lines)
-    return index != None
-
-################################################################################
-# insert header execution
-################################################################################
-
-def file_has_hashbang(file_lines):
-    if len(file_lines) < 1:
-        return False
-    if len(file_lines[0]) <= 2:
-        return False
-    return file_lines[0][:2] == '#!'
-
-def insert_python_header(filename, file_lines, start_year, end_year):
-    if file_has_hashbang(file_lines):
-        insert_idx = 1
-    else:
-        insert_idx = 0
-    header_lines = get_python_header_lines_to_insert(start_year, end_year)
-    for line in header_lines:
-        file_lines.insert(insert_idx, line)
-    write_file_lines(filename, file_lines)
-
-def insert_cpp_header(filename, file_lines, start_year, end_year):
-    header_lines = get_cpp_header_lines_to_insert(start_year, end_year)
-    for line in header_lines:
-        file_lines.insert(0, line)
-    write_file_lines(filename, file_lines)
-
-def exec_insert_header(filename, style):
-    file_lines = read_file_lines(filename)
-    if file_already_has_core_copyright(file_lines):
-        sys.exit('*** %s already has a copyright by The Bitcoin Core developers'
-                 % (filename))
-    start_year, end_year = get_git_change_year_range(filename)
-    if style == 'python':
-        insert_python_header(filename, file_lines, start_year, end_year)
-    else:
-        insert_cpp_header(filename, file_lines, start_year, end_year)
-
-################################################################################
-# insert cmd
-################################################################################
-
-INSERT_USAGE = """
-Inserts a copyright header for "The Bitcoin Core developers" at the top of the
-file in either Python or C++ style as determined by the file extension. If the
-file is a Python file and it has a '#!' starting the first line, the header is
-inserted in the line below it.
-
-The copyright dates will be set to be:
-
-"<year_introduced>-<current_year>"
-
-where <year_introduced> is according to the 'git log' history. If
-<year_introduced> is equal to <current_year>, the date will be set to be:
-
-"<current_year>"
-
-If the file already has a copyright for "The Bitcoin Core developers", the
-script will exit.
-
-Usage:
-    $ ./copyright_header.py insert <file>
-
-Arguments:
-    <file> - A source file in the bitcoin repository.
-"""
-
-def insert_cmd(argv):
-    if len(argv) != 3:
-        sys.exit(INSERT_USAGE)
-
-    filename = argv[2]
-    if not os.path.isfile(filename):
-        sys.exit("*** bad filename: %s" % filename)
-    _, extension = os.path.splitext(filename)
-    if extension not in ['.h', '.cpp', '.cc', '.c', '.py']:
-        sys.exit("*** cannot insert for file extension %s" % extension)
-
-    if extension == '.py':
-        style = 'python'
-    else:
-        style = 'cpp'
-    exec_insert_header(filename, style)
-
-################################################################################
-# UI
-################################################################################
-
-USAGE = """
-copyright_header.py - utilities for managing copyright headers of 'The Bitcoin
-Core developers' in repository source files.
-
-Usage:
-    $ ./copyright_header <subcommand>
-
-Subcommands:
-    report
-    update
-    insert
-
-To see subcommand usage, run them without arguments.
-"""
-
-SUBCOMMANDS = ['report', 'update', 'insert']
-
-if __name__ == "__main__":
-    if len(sys.argv) == 1:
-        sys.exit(USAGE)
-    subcommand = sys.argv[1]
-    if subcommand not in SUBCOMMANDS:
-        sys.exit(USAGE)
-    if subcommand == 'report':
-        report_cmd(sys.argv)
-    elif subcommand == 'update':
-        update_cmd(sys.argv)
-    elif subcommand == 'insert':
-        insert_cmd(sys.argv)

contrib/devtools/fix-copyright-headers.py

@@ -0,0 +1,46 @@
+#!/usr/bin/env python
+'''
+Run this script to update all the copyright headers of files
+that were changed this year.
+
+For example:
+
+// Copyright (c) 2009-2012 The Bitcoin Core developers
+
+it will change it to
+
+// Copyright (c) 2009-2015 The Bitcoin Core developers
+'''
+import os
+import time
+import re
+
+year = time.gmtime()[0]
+CMD_GIT_DATE = 'git log --format=%%ad --date=short -1 %s | cut -d"-" -f 1'
+CMD_REGEX= "perl -pi -e 's/(20\d\d)(?:-20\d\d)? The Bitcoin/$1-%s The Bitcoin/' %s"
+REGEX_CURRENT= re.compile("%s The Bitcoin" % year)
+CMD_LIST_FILES= "find %s | grep %s"
+
+FOLDERS = ["./qa", "./src"]
+EXTENSIONS = [".cpp",".h", ".py"]
+
+def get_git_date(file_path):
+  r = os.popen(CMD_GIT_DATE % file_path)
+  for l in r:
+    # Result is one line, so just return
+    return l.replace("\n","")
+  return ""
+
+n=1
+for folder in FOLDERS:
+  for extension in EXTENSIONS:
+    for file_path in os.popen(CMD_LIST_FILES % (folder, extension)):
+      file_path = os.getcwd() + file_path[1:-1]
+      if file_path.endswith(extension):
+        git_date = get_git_date(file_path)
+        if str(year) == git_date:
+          # Only update if current year is not found
+          if REGEX_CURRENT.search(open(file_path, "r").read()) is None:
+            print n,"Last git edit", git_date, "-", file_path
+            os.popen(CMD_REGEX % (year,file_path))
+            n = n + 1

contrib/devtools/gen-manpages.sh

@@ -1,32 +0,0 @@
-#!/usr/bin/env bash
-
-export LC_ALL=C
-TOPDIR=${TOPDIR:-$(git rev-parse --show-toplevel)}
-BUILDDIR=${BUILDDIR:-$TOPDIR}
-
-BINDIR=${BINDIR:-$BUILDDIR/src}
-MANDIR=${MANDIR:-$TOPDIR/doc/man}
-
-BITCOIND=${BITCOIND:-$BINDIR/bitcoind}
-BITCOINCLI=${BITCOINCLI:-$BINDIR/bitcoin-cli}
-BITCOINTX=${BITCOINTX:-$BINDIR/bitcoin-tx}
-BITCOINQT=${BITCOINQT:-$BINDIR/qt/bitcoin-qt}
-
-[ ! -x $BITCOIND ] && echo "$BITCOIND not found or not executable." && exit 1
-
-# The autodetected version git tag can screw up manpage output a little bit
-BTCVER=($($BITCOINCLI --version | head -n1 | awk -F'[ -]' '{ print $6, $7 }'))
-
-# Create a footer file with copyright content.
-# This gets autodetected fine for bitcoind if --version-string is not set,
-# but has different outcomes for bitcoin-qt and bitcoin-cli.
-echo "[COPYRIGHT]" > footer.h2m
-$BITCOIND --version | sed -n '1!p' >> footer.h2m
-
-for cmd in $BITCOIND $BITCOINCLI $BITCOINTX $BITCOINQT; do
-  cmdname="${cmd##*/}"
-  help2man -N --version-string=${BTCVER[0]} --include=footer.h2m -o ${MANDIR}/${cmdname}.1 ${cmd}
-  sed -i "s/\\\-${BTCVER[1]}//g" ${MANDIR}/${cmdname}.1
-done
-
-rm -f footer.h2m

contrib/devtools/git-subtree-check.sh

@@ -3,7 +3,6 @@
 # Distributed under the MIT software license, see the accompanying
 # file COPYING or http://www.opensource.org/licenses/mit-license.php.
 
-export LC_ALL=C
 DIR="$1"
 COMMIT="$2"
 if [ -z "$COMMIT" ]; then
@@ -19,7 +18,7 @@ find_latest_squash()
 	sub=
 	git log --grep="^git-subtree-dir: $dir/*\$" \
 		--pretty=format:'START %H%n%s%n%n%b%nEND%n' "$COMMIT" |
-	while read a b _; do
+	while read a b junk; do
 		case "$a" in
 			START) sq="$b" ;;
 			git-subtree-mainline:) main="$b" ;;
@@ -42,17 +41,21 @@ find_latest_squash()
 	done
 }
 
-# find latest subtree update
 latest_squash="$(find_latest_squash "$DIR")"
 if [ -z "$latest_squash" ]; then
     echo "ERROR: $DIR is not a subtree" >&2
     exit 2
 fi
+
 set $latest_squash
 old=$1
 rev=$2
-
-# get the tree in the current commit
+if [ "d$(git cat-file -t $rev 2>/dev/null)" != dcommit ]; then
+    echo "ERROR: subtree commit $rev unavailable. Fetch/update the subtree repository" >&2
+    exit 2
+fi
+tree_subtree=$(git show -s --format="%T" $rev)
+echo "$DIR in $COMMIT was last updated to upstream commit $rev (tree $tree_subtree)"
 tree_actual=$(git ls-tree -d "$COMMIT" "$DIR" | head -n 1)
 if [ -z "$tree_actual" ]; then
     echo "FAIL: subtree directory $DIR not found in $COMMIT" >&2
@@ -66,30 +69,9 @@ if [ "d$tree_actual_type" != "dtree" ]; then
     echo "FAIL: subtree directory $DIR is not a tree in $COMMIT" >&2
     exit 1
 fi
-
-# get the tree at the time of the last subtree update
-tree_commit=$(git show -s --format="%T" $old)
-echo "$DIR in $COMMIT was last updated in commit $old (tree $tree_commit)"
-
-# ... and compare the actual tree with it
-if [ "$tree_actual_tree" != "$tree_commit" ]; then
-    git diff $tree_commit $tree_actual_tree >&2
-    echo "FAIL: subtree directory was touched without subtree merge" >&2
-    exit 1
-fi
-
-# get the tree in the subtree commit referred to
-if [ "d$(git cat-file -t $rev 2>/dev/null)" != dcommit ]; then
-    echo "subtree commit $rev unavailable: cannot compare" >&2
-    exit
-fi
-tree_subtree=$(git show -s --format="%T" $rev)
-echo "$DIR in $COMMIT was last updated to upstream commit $rev (tree $tree_subtree)"
-
-# ... and compare the actual tree with it
 if [ "$tree_actual_tree" != "$tree_subtree" ]; then
-    echo "FAIL: subtree update commit differs from upstream tree!" >&2
+    git diff-tree $tree_actual_tree $tree_subtree >&2
+    echo "FAIL: subtree directory tree doesn't match subtree commit tree" >&2
     exit 1
 fi
-
 echo "GOOD"

contrib/devtools/github-merge.py

@@ -1,5 +1,5 @@
 #!/usr/bin/env python3
-# Copyright (c) 2016-2017 Bitcoin Core Developers
+# Copyright (c) 2016 Bitcoin Core Developers
 # Distributed under the MIT software license, see the accompanying
 # file COPYING or http://www.opensource.org/licenses/mit-license.php.
 
@@ -15,14 +15,11 @@
 # In case of a clean merge that is accepted by the user, the local branch with
 # name $BRANCH is overwritten with the merged result, and optionally pushed.
 from __future__ import division,print_function,unicode_literals
-import os
+import os,sys
 from sys import stdin,stdout,stderr
 import argparse
-import hashlib
 import subprocess
-import sys
-import json
-import codecs
+import json,codecs
 try:
     from urllib.request import Request,urlopen
 except:
@@ -47,7 +44,7 @@ def git_config_get(option, default=None):
     '''
     try:
         return subprocess.check_output([GIT,'config','--get',option]).rstrip().decode('utf-8')
-    except subprocess.CalledProcessError:
+    except subprocess.CalledProcessError as e:
         return default
 
 def retrieve_pr_info(repo,pull):
@@ -72,67 +69,6 @@ def ask_prompt(text):
     print("",file=stderr)
     return reply
 
-def get_symlink_files():
-    files = sorted(subprocess.check_output([GIT, 'ls-tree', '--full-tree', '-r', 'HEAD']).splitlines())
-    ret = []
-    for f in files:
-        if (int(f.decode('utf-8').split(" ")[0], 8) & 0o170000) == 0o120000:
-            ret.append(f.decode('utf-8').split("\t")[1])
-    return ret
-
-def tree_sha512sum(commit='HEAD'):
-    # request metadata for entire tree, recursively
-    files = []
-    blob_by_name = {}
-    for line in subprocess.check_output([GIT, 'ls-tree', '--full-tree', '-r', commit]).splitlines():
-        name_sep = line.index(b'\t')
-        metadata = line[:name_sep].split() # perms, 'blob', blobid
-        assert(metadata[1] == b'blob')
-        name = line[name_sep+1:]
-        files.append(name)
-        blob_by_name[name] = metadata[2]
-
-    files.sort()
-    # open connection to git-cat-file in batch mode to request data for all blobs
-    # this is much faster than launching it per file
-    p = subprocess.Popen([GIT, 'cat-file', '--batch'], stdout=subprocess.PIPE, stdin=subprocess.PIPE)
-    overall = hashlib.sha512()
-    for f in files:
-        blob = blob_by_name[f]
-        # request blob
-        p.stdin.write(blob + b'\n')
-        p.stdin.flush()
-        # read header: blob, "blob", size
-        reply = p.stdout.readline().split()
-        assert(reply[0] == blob and reply[1] == b'blob')
-        size = int(reply[2])
-        # hash the blob data
-        intern = hashlib.sha512()
-        ptr = 0
-        while ptr < size:
-            bs = min(65536, size - ptr)
-            piece = p.stdout.read(bs)
-            if len(piece) == bs:
-                intern.update(piece)
-            else:
-                raise IOError('Premature EOF reading git cat-file output')
-            ptr += bs
-        dig = intern.hexdigest()
-        assert(p.stdout.read(1) == b'\n') # ignore LF that follows blob data
-        # update overall hash with file hash
-        overall.update(dig.encode("utf-8"))
-        overall.update("  ".encode("utf-8"))
-        overall.update(f)
-        overall.update("\n".encode("utf-8"))
-    p.stdin.close()
-    if p.wait():
-        raise IOError('Non-zero return value executing git cat-file')
-    return overall.hexdigest()
-
-def print_merge_details(pull, title, branch, base_branch, head_branch):
-    print('%s#%s%s %s %sinto %s%s' % (ATTR_RESET+ATTR_PR,pull,ATTR_RESET,title,ATTR_RESET+ATTR_PR,branch,ATTR_RESET))
-    subprocess.check_call([GIT,'log','--graph','--topo-order','--pretty=format:'+COMMIT_FORMAT,base_branch+'..'+head_branch])
-
 def parse_arguments():
     epilog = '''
         In addition, you can set the following git configuration variables:
@@ -160,11 +96,11 @@ def main():
     if repo is None:
         print("ERROR: No repository configured. Use this command to set:", file=stderr)
         print("git config githubmerge.repository <owner>/<repo>", file=stderr)
-        sys.exit(1)
+        exit(1)
     if signingkey is None:
         print("ERROR: No GPG signing key set. Set one using:",file=stderr)
         print("git config --global user.signingkey <key>",file=stderr)
-        sys.exit(1)
+        exit(1)
 
     host_repo = host+":"+repo # shortcut for push/pull target
 
@@ -175,9 +111,8 @@ def main():
     # Receive pull information from github
     info = retrieve_pr_info(repo,pull)
     if info is None:
-        sys.exit(1)
-    title = info['title'].strip()
-    body = info['body'].strip()
+        exit(1)
+    title = info['title']
     # precedence order for destination branch argument:
     #   - command line argument
     #   - githubmerge.branch setting
@@ -191,36 +126,37 @@ def main():
     merge_branch = 'pull/'+pull+'/merge'
     local_merge_branch = 'pull/'+pull+'/local-merge'
 
-    devnull = open(os.devnull, 'w', encoding="utf8")
+    devnull = open(os.devnull,'w')
     try:
         subprocess.check_call([GIT,'checkout','-q',branch])
-    except subprocess.CalledProcessError:
+    except subprocess.CalledProcessError as e:
         print("ERROR: Cannot check out branch %s." % (branch), file=stderr)
-        sys.exit(3)
+        exit(3)
     try:
-        subprocess.check_call([GIT,'fetch','-q',host_repo,'+refs/pull/'+pull+'/*:refs/heads/pull/'+pull+'/*',
-                                                          '+refs/heads/'+branch+':refs/heads/'+base_branch])
-    except subprocess.CalledProcessError:
-        print("ERROR: Cannot find pull request #%s or branch %s on %s." % (pull,branch,host_repo), file=stderr)
-        sys.exit(3)
+        subprocess.check_call([GIT,'fetch','-q',host_repo,'+refs/pull/'+pull+'/*:refs/heads/pull/'+pull+'/*'])
+    except subprocess.CalledProcessError as e:
+        print("ERROR: Cannot find pull request #%s on %s." % (pull,host_repo), file=stderr)
+        exit(3)
     try:
         subprocess.check_call([GIT,'log','-q','-1','refs/heads/'+head_branch], stdout=devnull, stderr=stdout)
-    except subprocess.CalledProcessError:
+    except subprocess.CalledProcessError as e:
         print("ERROR: Cannot find head of pull request #%s on %s." % (pull,host_repo), file=stderr)
-        sys.exit(3)
+        exit(3)
     try:
         subprocess.check_call([GIT,'log','-q','-1','refs/heads/'+merge_branch], stdout=devnull, stderr=stdout)
-    except subprocess.CalledProcessError:
+    except subprocess.CalledProcessError as e:
         print("ERROR: Cannot find merge of pull request #%s on %s." % (pull,host_repo), file=stderr)
-        sys.exit(3)
+        exit(3)
+    try:
+        subprocess.check_call([GIT,'fetch','-q',host_repo,'+refs/heads/'+branch+':refs/heads/'+base_branch])
+    except subprocess.CalledProcessError as e:
+        print("ERROR: Cannot find branch %s on %s." % (branch,host_repo), file=stderr)
+        exit(3)
     subprocess.check_call([GIT,'checkout','-q',base_branch])
     subprocess.call([GIT,'branch','-q','-D',local_merge_branch], stderr=devnull)
     subprocess.check_call([GIT,'checkout','-q','-b',local_merge_branch])
 
     try:
-        # Go up to the repository's root.
-        toplevel = subprocess.check_output([GIT,'rev-parse','--show-toplevel']).strip()
-        os.chdir(toplevel)
         # Create unsigned merge commit.
         if title:
             firstline = 'Merge #%s: %s' % (pull,title)
@@ -228,45 +164,28 @@ def main():
             firstline = 'Merge #%s' % (pull,)
         message = firstline + '\n\n'
         message += subprocess.check_output([GIT,'log','--no-merges','--topo-order','--pretty=format:%h %s (%an)',base_branch+'..'+head_branch]).decode('utf-8')
-        message += '\n\nPull request description:\n\n  ' + body.replace('\n', '\n  ') + '\n'
         try:
             subprocess.check_call([GIT,'merge','-q','--commit','--no-edit','--no-ff','-m',message.encode('utf-8'),head_branch])
-        except subprocess.CalledProcessError:
+        except subprocess.CalledProcessError as e:
             print("ERROR: Cannot be merged cleanly.",file=stderr)
             subprocess.check_call([GIT,'merge','--abort'])
-            sys.exit(4)
+            exit(4)
         logmsg = subprocess.check_output([GIT,'log','--pretty=format:%s','-n','1']).decode('utf-8')
         if logmsg.rstrip() != firstline.rstrip():
             print("ERROR: Creating merge failed (already merged?).",file=stderr)
-            sys.exit(4)
+            exit(4)
 
-        symlink_files = get_symlink_files()
-        for f in symlink_files:
-            print("ERROR: File %s was a symlink" % f)
-        if len(symlink_files) > 0:
-            sys.exit(4)
-
-        # Put tree SHA512 into the message
-        try:
-            first_sha512 = tree_sha512sum()
-            message += '\n\nTree-SHA512: ' + first_sha512
-        except subprocess.CalledProcessError:
-            print("ERROR: Unable to compute tree hash")
-            sys.exit(4)
-        try:
-            subprocess.check_call([GIT,'commit','--amend','-m',message.encode('utf-8')])
-        except subprocess.CalledProcessError:
-            print("ERROR: Cannot update message.", file=stderr)
-            sys.exit(4)
-
-        print_merge_details(pull, title, branch, base_branch, head_branch)
+        print('%s#%s%s %s %sinto %s%s' % (ATTR_RESET+ATTR_PR,pull,ATTR_RESET,title,ATTR_RESET+ATTR_PR,branch,ATTR_RESET))
+        subprocess.check_call([GIT,'log','--graph','--topo-order','--pretty=format:'+COMMIT_FORMAT,base_branch+'..'+head_branch])
         print()
-
         # Run test command if configured.
         if testcmd:
+            # Go up to the repository's root.
+            toplevel = subprocess.check_output([GIT,'rev-parse','--show-toplevel']).strip()
+            os.chdir(toplevel)
             if subprocess.call(testcmd,shell=True):
                 print("ERROR: Running %s failed." % testcmd,file=stderr)
-                sys.exit(5)
+                exit(5)
 
             # Show the created merge.
             diff = subprocess.check_output([GIT,'diff',merge_branch+'..'+local_merge_branch])
@@ -277,7 +196,13 @@ def main():
                 if reply.lower() == 'ignore':
                     print("Difference with github ignored.",file=stderr)
                 else:
-                    sys.exit(6)
+                    exit(6)
+            reply = ask_prompt("Press 'd' to accept the diff.")
+            if reply.lower() == 'd':
+                print("Diff accepted.",file=stderr)
+            else:
+                print("ERROR: Diff rejected.",file=stderr)
+                exit(6)
         else:
             # Verify the result manually.
             print("Dropping you on a shell so you can try building/testing the merged source.",file=stderr)
@@ -286,25 +211,24 @@ def main():
             if os.path.isfile('/etc/debian_version'): # Show pull number on Debian default prompt
                 os.putenv('debian_chroot',pull)
             subprocess.call([BASH,'-i'])
-
-        second_sha512 = tree_sha512sum()
-        if first_sha512 != second_sha512:
-            print("ERROR: Tree hash changed unexpectedly",file=stderr)
-            sys.exit(8)
+            reply = ask_prompt("Type 'm' to accept the merge.")
+            if reply.lower() == 'm':
+                print("Merge accepted.",file=stderr)
+            else:
+                print("ERROR: Merge rejected.",file=stderr)
+                exit(7)
 
         # Sign the merge commit.
-        print_merge_details(pull, title, branch, base_branch, head_branch)
-        while True:
-            reply = ask_prompt("Type 's' to sign off on the above merge, or 'x' to reject and exit.").lower()
-            if reply == 's':
-                try:
-                    subprocess.check_call([GIT,'commit','-q','--gpg-sign','--amend','--no-edit'])
-                    break
-                except subprocess.CalledProcessError:
-                    print("Error while signing, asking again.",file=stderr)
-            elif reply == 'x':
-                print("Not signing off on merge, exiting.",file=stderr)
-                sys.exit(1)
+        reply = ask_prompt("Type 's' to sign off on the merge.")
+        if reply == 's':
+            try:
+                subprocess.check_call([GIT,'commit','-q','--gpg-sign','--amend','--no-edit'])
+            except subprocess.CalledProcessError as e:
+                print("Error signing, exiting.",file=stderr)
+                exit(1)
+        else:
+            print("Not signing off on merge, exiting.",file=stderr)
+            exit(1)
 
         # Put the result in branch.
         subprocess.check_call([GIT,'checkout','-q',branch])
@@ -318,13 +242,9 @@ def main():
         subprocess.call([GIT,'branch','-q','-D',local_merge_branch],stderr=devnull)
 
     # Push the result.
-    while True:
-        reply = ask_prompt("Type 'push' to push the result to %s, branch %s, or 'x' to exit without pushing." % (host_repo,branch)).lower()
-        if reply == 'push':
-            subprocess.check_call([GIT,'push',host_repo,'refs/heads/'+branch])
-            break
-        elif reply == 'x':
-            sys.exit(1)
+    reply = ask_prompt("Type 'push' to push the result to %s, branch %s." % (host_repo,branch))
+    if reply.lower() == 'push':
+        subprocess.check_call([GIT,'push',host_repo,'refs/heads/'+branch])
 
 if __name__ == '__main__':
     main()

contrib/devtools/optimize-pngs.py

@@ -1,5 +1,5 @@
-#!/usr/bin/env python3
-# Copyright (c) 2014-2018 The Bitcoin Core developers
+#!/usr/bin/env python
+# Copyright (c) 2014-2015 The Bitcoin Core developers
 # Distributed under the MIT software license, see the accompanying
 # file COPYING or http://www.opensource.org/licenses/mit-license.php.
 '''
@@ -10,7 +10,7 @@ import os
 import sys
 import subprocess
 import hashlib
-from PIL import Image  # pip3 install Pillow
+from PIL import Image
 
 def file_hash(filename):
     '''Return hash of raw file contents'''
@@ -27,7 +27,7 @@ def content_hash(filename):
 pngcrush = 'pngcrush'
 git = 'git'
 folders = ["src/qt/res/movies", "src/qt/res/icons", "share/pixmaps"]
-basePath = subprocess.check_output([git, 'rev-parse', '--show-toplevel'], universal_newlines=True).rstrip('\n')
+basePath = subprocess.check_output([git, 'rev-parse', '--show-toplevel']).rstrip('\n')
 totalSaveBytes = 0
 noHashChange = True
 
@@ -37,40 +37,42 @@ for folder in folders:
     for file in os.listdir(absFolder):
         extension = os.path.splitext(file)[1]
         if extension.lower() == '.png':
-            print("optimizing {}...".format(file), end =' ')
+            print("optimizing "+file+"..."),
             file_path = os.path.join(absFolder, file)
-            fileMetaMap = {'file' : file, 'osize': os.path.getsize(file_path), 'sha256Old' : file_hash(file_path)}
+            fileMetaMap = {'file' : file, 'osize': os.path.getsize(file_path), 'sha256Old' : file_hash(file_path)};
             fileMetaMap['contentHashPre'] = content_hash(file_path)
-
+        
+            pngCrushOutput = ""
             try:
-                subprocess.call([pngcrush, "-brute", "-ow", "-rem", "gAMA", "-rem", "cHRM", "-rem", "iCCP", "-rem", "sRGB", "-rem", "alla", "-rem", "text", file_path],
-                                stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
+                pngCrushOutput = subprocess.check_output(
+                        [pngcrush, "-brute", "-ow", "-rem", "gAMA", "-rem", "cHRM", "-rem", "iCCP", "-rem", "sRGB", "-rem", "alla", "-rem", "text", file_path],
+                        stderr=subprocess.STDOUT).rstrip('\n')
             except:
-                print("pngcrush is not installed, aborting...")
+                print "pngcrush is not installed, aborting..."
                 sys.exit(0)
-
+        
             #verify
-            if "Not a PNG file" in subprocess.check_output([pngcrush, "-n", "-v", file_path], stderr=subprocess.STDOUT, universal_newlines=True):
-                print("PNG file "+file+" is corrupted after crushing, check out pngcursh version")
+            if "Not a PNG file" in subprocess.check_output([pngcrush, "-n", "-v", file_path], stderr=subprocess.STDOUT):
+                print "PNG file "+file+" is corrupted after crushing, check out pngcursh version"
                 sys.exit(1)
-
+            
             fileMetaMap['sha256New'] = file_hash(file_path)
             fileMetaMap['contentHashPost'] = content_hash(file_path)
 
             if fileMetaMap['contentHashPre'] != fileMetaMap['contentHashPost']:
-                print("Image contents of PNG file {} before and after crushing don't match".format(file))
+                print "Image contents of PNG file "+file+" before and after crushing don't match"
                 sys.exit(1)
 
             fileMetaMap['psize'] = os.path.getsize(file_path)
             outputArray.append(fileMetaMap)
-            print("done")
+            print("done\n"),
 
-print("summary:\n+++++++++++++++++")
+print "summary:\n+++++++++++++++++"
 for fileDict in outputArray:
     oldHash = fileDict['sha256Old']
     newHash = fileDict['sha256New']
     totalSaveBytes += fileDict['osize'] - fileDict['psize']
     noHashChange = noHashChange and (oldHash == newHash)
-    print(fileDict['file']+"\n  size diff from: "+str(fileDict['osize'])+" to: "+str(fileDict['psize'])+"\n  old sha256: "+oldHash+"\n  new sha256: "+newHash+"\n")
-
-print("completed. Checksum stable: "+str(noHashChange)+". Total reduction: "+str(totalSaveBytes)+" bytes")
+    print fileDict['file']+"\n  size diff from: "+str(fileDict['osize'])+" to: "+str(fileDict['psize'])+"\n  old sha256: "+oldHash+"\n  new sha256: "+newHash+"\n"
+    
+print "completed. Checksum stable: "+str(noHashChange)+". Total reduction: "+str(totalSaveBytes)+" bytes"

contrib/devtools/security-check.py

@@ -1,5 +1,5 @@
-#!/usr/bin/env python3
-# Copyright (c) 2015-2018 The Bitcoin Core developers
+#!/usr/bin/python2
+# Copyright (c) 2015-2016 The Bitcoin Core developers
 # Distributed under the MIT software license, see the accompanying
 # file COPYING or http://www.opensource.org/licenses/mit-license.php.
 '''
@@ -8,50 +8,50 @@ Exit status will be 0 if successful, and the program will be silent.
 Otherwise the exit status will be 1 and it will log which executables failed which checks.
 Needs `readelf` (for ELF) and `objdump` (for PE).
 '''
+from __future__ import division,print_function,unicode_literals
 import subprocess
 import sys
 import os
 
 READELF_CMD = os.getenv('READELF', '/usr/bin/readelf')
 OBJDUMP_CMD = os.getenv('OBJDUMP', '/usr/bin/objdump')
-NONFATAL = {} # checks which are non-fatal for now but only generate a warning
 
 def check_ELF_PIE(executable):
     '''
     Check for position independent executable (PIE), allowing for address space randomization.
     '''
-    p = subprocess.Popen([READELF_CMD, '-h', '-W', executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE, universal_newlines=True)
+    p = subprocess.Popen([READELF_CMD, '-h', '-W', executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE)
     (stdout, stderr) = p.communicate()
     if p.returncode:
         raise IOError('Error opening file')
 
     ok = False
-    for line in stdout.splitlines():
+    for line in stdout.split(b'\n'):
         line = line.split()
-        if len(line)>=2 and line[0] == 'Type:' and line[1] == 'DYN':
+        if len(line)>=2 and line[0] == b'Type:' and line[1] == b'DYN':
             ok = True
     return ok
 
 def get_ELF_program_headers(executable):
     '''Return type and flags for ELF program headers'''
-    p = subprocess.Popen([READELF_CMD, '-l', '-W', executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE, universal_newlines=True)
+    p = subprocess.Popen([READELF_CMD, '-l', '-W', executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE)
     (stdout, stderr) = p.communicate()
     if p.returncode:
         raise IOError('Error opening file')
     in_headers = False
     count = 0
     headers = []
-    for line in stdout.splitlines():
-        if line.startswith('Program Headers:'):
+    for line in stdout.split(b'\n'):
+        if line.startswith(b'Program Headers:'):
             in_headers = True
-        if line == '':
+        if line == b'':
             in_headers = False
         if in_headers:
             if count == 1: # header line
-                ofs_typ = line.find('Type')
-                ofs_offset = line.find('Offset')
-                ofs_flags = line.find('Flg')
-                ofs_align = line.find('Align')
+                ofs_typ = line.find(b'Type')
+                ofs_offset = line.find(b'Offset')
+                ofs_flags = line.find(b'Flg')
+                ofs_align = line.find(b'Align')
                 if ofs_typ == -1 or ofs_offset == -1 or ofs_flags == -1 or ofs_align  == -1:
                     raise ValueError('Cannot parse elfread -lW output')
             elif count > 1:
@@ -68,9 +68,9 @@ def check_ELF_NX(executable):
     have_wx = False
     have_gnu_stack = False
     for (typ, flags) in get_ELF_program_headers(executable):
-        if typ == 'GNU_STACK':
+        if typ == b'GNU_STACK':
             have_gnu_stack = True
-        if 'W' in flags and 'E' in flags: # section is both writable and executable
+        if b'W' in flags and b'E' in flags: # section is both writable and executable
             have_wx = True
     return have_gnu_stack and not have_wx
 
@@ -87,17 +87,17 @@ def check_ELF_RELRO(executable):
         # However, the dynamic linker need to write to this area so these are RW.
         # Glibc itself takes care of mprotecting this area R after relocations are finished.
         # See also http://permalink.gmane.org/gmane.comp.gnu.binutils/71347
-        if typ == 'GNU_RELRO':
+        if typ == b'GNU_RELRO':
             have_gnu_relro = True
 
     have_bindnow = False
-    p = subprocess.Popen([READELF_CMD, '-d', '-W', executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE, universal_newlines=True)
+    p = subprocess.Popen([READELF_CMD, '-d', '-W', executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE)
     (stdout, stderr) = p.communicate()
     if p.returncode:
         raise IOError('Error opening file')
-    for line in stdout.splitlines():
+    for line in stdout.split(b'\n'):
         tokens = line.split()
-        if len(tokens)>1 and tokens[1] == '(BIND_NOW)' or (len(tokens)>2 and tokens[1] == '(FLAGS)' and 'BIND_NOW' in tokens[2:]):
+        if len(tokens)>1 and tokens[1] == b'(BIND_NOW)' or (len(tokens)>2 and tokens[1] == b'(FLAGS)' and b'BIND_NOW' in tokens[2]):
             have_bindnow = True
     return have_gnu_relro and have_bindnow
 
@@ -105,62 +105,38 @@ def check_ELF_Canary(executable):
     '''
     Check for use of stack canary
     '''
-    p = subprocess.Popen([READELF_CMD, '--dyn-syms', '-W', executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE, universal_newlines=True)
+    p = subprocess.Popen([READELF_CMD, '--dyn-syms', '-W', executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE)
     (stdout, stderr) = p.communicate()
     if p.returncode:
         raise IOError('Error opening file')
     ok = False
-    for line in stdout.splitlines():
-        if '__stack_chk_fail' in line:
+    for line in stdout.split(b'\n'):
+        if b'__stack_chk_fail' in line:
             ok = True
     return ok
 
 def get_PE_dll_characteristics(executable):
     '''
-    Get PE DllCharacteristics bits.
-    Returns a tuple (arch,bits) where arch is 'i386:x86-64' or 'i386'
-    and bits is the DllCharacteristics value.
+    Get PE DllCharacteristics bits
     '''
-    p = subprocess.Popen([OBJDUMP_CMD, '-x',  executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE, universal_newlines=True)
+    p = subprocess.Popen([OBJDUMP_CMD, '-x',  executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE)
     (stdout, stderr) = p.communicate()
     if p.returncode:
         raise IOError('Error opening file')
-    arch = ''
-    bits = 0
-    for line in stdout.splitlines():
+    for line in stdout.split('\n'):
         tokens = line.split()
-        if len(tokens)>=2 and tokens[0] == 'architecture:':
-            arch = tokens[1].rstrip(',')
         if len(tokens)>=2 and tokens[0] == 'DllCharacteristics':
-            bits = int(tokens[1],16)
-    return (arch,bits)
+            return int(tokens[1],16)
+    return 0
 
-IMAGE_DLL_CHARACTERISTICS_HIGH_ENTROPY_VA = 0x0020
-IMAGE_DLL_CHARACTERISTICS_DYNAMIC_BASE    = 0x0040
-IMAGE_DLL_CHARACTERISTICS_NX_COMPAT       = 0x0100
 
-def check_PE_DYNAMIC_BASE(executable):
+def check_PE_PIE(executable):
     '''PIE: DllCharacteristics bit 0x40 signifies dynamicbase (ASLR)'''
-    (arch,bits) = get_PE_dll_characteristics(executable)
-    reqbits = IMAGE_DLL_CHARACTERISTICS_DYNAMIC_BASE
-    return (bits & reqbits) == reqbits
-
-# On 64 bit, must support high-entropy 64-bit address space layout randomization in addition to DYNAMIC_BASE
-# to have secure ASLR.
-def check_PE_HIGH_ENTROPY_VA(executable):
-    '''PIE: DllCharacteristics bit 0x20 signifies high-entropy ASLR'''
-    (arch,bits) = get_PE_dll_characteristics(executable)
-    if arch == 'i386:x86-64':
-        reqbits = IMAGE_DLL_CHARACTERISTICS_HIGH_ENTROPY_VA
-    else: # Unnecessary on 32-bit
-        assert(arch == 'i386')
-        reqbits = 0
-    return (bits & reqbits) == reqbits
+    return bool(get_PE_dll_characteristics(executable) & 0x40)
 
 def check_PE_NX(executable):
     '''NX: DllCharacteristics bit 0x100 signifies nxcompat (DEP)'''
-    (arch,bits) = get_PE_dll_characteristics(executable)
-    return (bits & IMAGE_DLL_CHARACTERISTICS_NX_COMPAT) == IMAGE_DLL_CHARACTERISTICS_NX_COMPAT
+    return bool(get_PE_dll_characteristics(executable) & 0x100)
 
 CHECKS = {
 'ELF': [
@@ -170,8 +146,7 @@ CHECKS = {
     ('Canary', check_ELF_Canary)
 ],
 'PE': [
-    ('DYNAMIC_BASE', check_PE_DYNAMIC_BASE),
-    ('HIGH_ENTROPY_VA', check_PE_HIGH_ENTROPY_VA),
+    ('PIE', check_PE_PIE),
     ('NX', check_PE_NX)
 ]
 }
@@ -196,20 +171,14 @@ if __name__ == '__main__':
                 continue
 
             failed = []
-            warning = []
             for (name, func) in CHECKS[etype]:
                 if not func(filename):
-                    if name in NONFATAL:
-                        warning.append(name)
-                    else:
-                        failed.append(name)
+                    failed.append(name)
             if failed:
                 print('%s: failed %s' % (filename, ' '.join(failed)))
                 retval = 1
-            if warning:
-                print('%s: warning %s' % (filename, ' '.join(warning)))
         except IOError:
             print('%s: cannot open' % filename)
             retval = 1
-    sys.exit(retval)
+    exit(retval)
 

contrib/devtools/symbol-check.py

@@ -1,4 +1,4 @@
-#!/usr/bin/env python3
+#!/usr/bin/python2
 # Copyright (c) 2014 Wladimir J. van der Laan
 # Distributed under the MIT software license, see the accompanying
 # file COPYING or http://www.opensource.org/licenses/mit-license.php.
@@ -11,6 +11,7 @@ Example usage:
 
     find ../gitian-builder/build -type f -executable | xargs python contrib/devtools/symbol-check.py
 '''
+from __future__ import division, print_function, unicode_literals
 import subprocess
 import re
 import sys
@@ -46,28 +47,28 @@ MAX_VERSIONS = {
 
 # Ignore symbols that are exported as part of every executable
 IGNORE_EXPORTS = {
-'_edata', '_end', '_init', '__bss_start', '_fini', '_IO_stdin_used', 'stdin', 'stdout', 'stderr'
+b'_edata', b'_end', b'_init', b'__bss_start', b'_fini', b'_IO_stdin_used'
 }
 READELF_CMD = os.getenv('READELF', '/usr/bin/readelf')
 CPPFILT_CMD = os.getenv('CPPFILT', '/usr/bin/c++filt')
 # Allowed NEEDED libraries
 ALLOWED_LIBRARIES = {
 # bitcoind and bitcoin-qt
-'libgcc_s.so.1', # GCC base support
-'libc.so.6', # C library
-'libpthread.so.0', # threading
-'libanl.so.1', # DNS resolve
-'libm.so.6', # math library
-'librt.so.1', # real-time (clock)
-'ld-linux-x86-64.so.2', # 64-bit dynamic linker
-'ld-linux.so.2', # 32-bit dynamic linker
+b'libgcc_s.so.1', # GCC base support
+b'libc.so.6', # C library
+b'libpthread.so.0', # threading
+b'libanl.so.1', # DNS resolve
+b'libm.so.6', # math library
+b'librt.so.1', # real-time (clock)
+b'ld-linux-x86-64.so.2', # 64-bit dynamic linker
+b'ld-linux.so.2', # 32-bit dynamic linker
 # bitcoin-qt only
-'libX11-xcb.so.1', # part of X11
-'libX11.so.6', # part of X11
-'libxcb.so.1', # part of X11
-'libfontconfig.so.1', # font support
-'libfreetype.so.6', # font parsing
-'libdl.so.2' # programming interface to dynamic linker
+b'libX11-xcb.so.1', # part of X11
+b'libX11.so.6', # part of X11
+b'libxcb.so.1', # part of X11
+b'libfontconfig.so.1', # font support
+b'libfreetype.so.6', # font parsing
+b'libdl.so.2' # programming interface to dynamic linker
 }
 
 class CPPFilt(object):
@@ -77,10 +78,10 @@ class CPPFilt(object):
     Use a pipe to the 'c++filt' command.
     '''
     def __init__(self):
-        self.proc = subprocess.Popen(CPPFILT_CMD, stdin=subprocess.PIPE, stdout=subprocess.PIPE, universal_newlines=True)
+        self.proc = subprocess.Popen(CPPFILT_CMD, stdin=subprocess.PIPE, stdout=subprocess.PIPE)
 
     def __call__(self, mangled):
-        self.proc.stdin.write(mangled + '\n')
+        self.proc.stdin.write(mangled + b'\n')
         self.proc.stdin.flush()
         return self.proc.stdout.readline().rstrip()
 
@@ -94,43 +95,43 @@ def read_symbols(executable, imports=True):
     Parse an ELF executable and return a list of (symbol,version) tuples
     for dynamic, imported symbols.
     '''
-    p = subprocess.Popen([READELF_CMD, '--dyn-syms', '-W', executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE, universal_newlines=True)
+    p = subprocess.Popen([READELF_CMD, '--dyn-syms', '-W', executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE)
     (stdout, stderr) = p.communicate()
     if p.returncode:
         raise IOError('Could not read symbols for %s: %s' % (executable, stderr.strip()))
     syms = []
-    for line in stdout.splitlines():
+    for line in stdout.split(b'\n'):
         line = line.split()
-        if len(line)>7 and re.match('[0-9]+:$', line[0]):
-            (sym, _, version) = line[7].partition('@')
-            is_import = line[6] == 'UND'
-            if version.startswith('@'):
+        if len(line)>7 and re.match(b'[0-9]+:$', line[0]):
+            (sym, _, version) = line[7].partition(b'@')
+            is_import = line[6] == b'UND'
+            if version.startswith(b'@'):
                 version = version[1:]
             if is_import == imports:
                 syms.append((sym, version))
     return syms
 
 def check_version(max_versions, version):
-    if '_' in version:
-        (lib, _, ver) = version.rpartition('_')
+    if b'_' in version:
+        (lib, _, ver) = version.rpartition(b'_')
     else:
         lib = version
         ver = '0'
-    ver = tuple([int(x) for x in ver.split('.')])
+    ver = tuple([int(x) for x in ver.split(b'.')])
     if not lib in max_versions:
         return False
     return ver <= max_versions[lib]
 
 def read_libraries(filename):
-    p = subprocess.Popen([READELF_CMD, '-d', '-W', filename], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE, universal_newlines=True)
+    p = subprocess.Popen([READELF_CMD, '-d', '-W', filename], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE)
     (stdout, stderr) = p.communicate()
     if p.returncode:
         raise IOError('Error opening file')
     libraries = []
-    for line in stdout.splitlines():
+    for line in stdout.split(b'\n'):
         tokens = line.split()
-        if len(tokens)>2 and tokens[1] == '(NEEDED)':
-            match = re.match('^Shared library: \[(.*)\]$', ' '.join(tokens[2:]))
+        if len(tokens)>2 and tokens[1] == b'(NEEDED)':
+            match = re.match(b'^Shared library: \[(.*)\]$', b' '.join(tokens[2:]))
             if match:
                 libraries.append(match.group(1))
             else:
@@ -144,20 +145,20 @@ if __name__ == '__main__':
         # Check imported symbols
         for sym,version in read_symbols(filename, True):
             if version and not check_version(MAX_VERSIONS, version):
-                print('%s: symbol %s from unsupported version %s' % (filename, cppfilt(sym), version))
+                print('%s: symbol %s from unsupported version %s' % (filename, cppfilt(sym).decode('utf-8'), version.decode('utf-8')))
                 retval = 1
         # Check exported symbols
         for sym,version in read_symbols(filename, False):
             if sym in IGNORE_EXPORTS:
                 continue
-            print('%s: export of symbol %s not allowed' % (filename, cppfilt(sym)))
+            print('%s: export of symbol %s not allowed' % (filename, cppfilt(sym).decode('utf-8')))
             retval = 1
         # Check dependency libraries
         for library_name in read_libraries(filename):
             if library_name not in ALLOWED_LIBRARIES:
-                print('%s: NEEDED library %s is not allowed' % (filename, library_name))
+                print('%s: NEEDED library %s is not allowed' % (filename, library_name.decode('utf-8')))
                 retval = 1
 
-    sys.exit(retval)
+    exit(retval)
 
 

contrib/devtools/test-security-check.py

@@ -1,15 +1,17 @@
-#!/usr/bin/env python3
-# Copyright (c) 2015-2018 The Bitcoin Core developers
+#!/usr/bin/python2
+# Copyright (c) 2015-2016 The Bitcoin Core developers
 # Distributed under the MIT software license, see the accompanying
 # file COPYING or http://www.opensource.org/licenses/mit-license.php.
 '''
 Test script for security-check.py
 '''
+from __future__ import division,print_function
 import subprocess
+import sys
 import unittest
 
 def write_testcode(filename):
-    with open(filename, 'w', encoding="utf8") as f:
+    with open(filename, 'w') as f:
         f.write('''
     #include <stdio.h>
     int main()
@@ -21,7 +23,7 @@ def write_testcode(filename):
 
 def call_security_check(cc, source, executable, options):
     subprocess.check_call([cc,source,'-o',executable] + options)
-    p = subprocess.Popen(['./security-check.py',executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE, universal_newlines=True)
+    p = subprocess.Popen(['./security-check.py',executable], stdout=subprocess.PIPE, stderr=subprocess.PIPE, stdin=subprocess.PIPE)
     (stdout, stderr) = p.communicate()
     return (p.returncode, stdout.rstrip())
 
@@ -32,39 +34,29 @@ class TestSecurityChecks(unittest.TestCase):
         cc = 'gcc'
         write_testcode(source)
 
-        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,-zexecstack','-fno-stack-protector','-Wl,-znorelro','-no-pie','-fno-PIE']),
+        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,-zexecstack','-fno-stack-protector','-Wl,-znorelro']), 
                 (1, executable+': failed PIE NX RELRO Canary'))
-        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,-znoexecstack','-fno-stack-protector','-Wl,-znorelro','-no-pie','-fno-PIE']),
+        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,-znoexecstack','-fno-stack-protector','-Wl,-znorelro']), 
                 (1, executable+': failed PIE RELRO Canary'))
-        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,-znoexecstack','-fstack-protector-all','-Wl,-znorelro','-no-pie','-fno-PIE']),
+        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,-znoexecstack','-fstack-protector-all','-Wl,-znorelro']), 
                 (1, executable+': failed PIE RELRO'))
-        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,-znoexecstack','-fstack-protector-all','-Wl,-znorelro','-pie','-fPIE']),
+        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,-znoexecstack','-fstack-protector-all','-Wl,-znorelro','-pie','-fPIE']), 
                 (1, executable+': failed RELRO'))
-        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,-znoexecstack','-fstack-protector-all','-Wl,-zrelro','-Wl,-z,now','-pie','-fPIE']),
+        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,-znoexecstack','-fstack-protector-all','-Wl,-zrelro','-Wl,-z,now','-pie','-fPIE']), 
                 (0, ''))
 
-    def test_32bit_PE(self):
+    def test_PE(self):
         source = 'test1.c'
         executable = 'test1.exe'
         cc = 'i686-w64-mingw32-gcc'
         write_testcode(source)
 
-        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,--no-nxcompat','-Wl,--no-dynamicbase']),
-                (1, executable+': failed DYNAMIC_BASE NX'))
-        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,--nxcompat','-Wl,--no-dynamicbase']),
-                (1, executable+': failed DYNAMIC_BASE'))
-        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,--nxcompat','-Wl,--dynamicbase']),
+        self.assertEqual(call_security_check(cc, source, executable, []), 
+                (1, executable+': failed PIE NX'))
+        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,--nxcompat']), 
+                (1, executable+': failed PIE'))
+        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,--nxcompat','-Wl,--dynamicbase']), 
                 (0, ''))
-    def test_64bit_PE(self):
-        source = 'test1.c'
-        executable = 'test1.exe'
-        cc = 'x86_64-w64-mingw32-gcc'
-        write_testcode(source)
-
-        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,--no-nxcompat','-Wl,--no-dynamicbase','-Wl,--no-high-entropy-va']), (1, executable+': failed DYNAMIC_BASE HIGH_ENTROPY_VA NX'))
-        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,--nxcompat','-Wl,--no-dynamicbase','-Wl,--no-high-entropy-va']), (1, executable+': failed DYNAMIC_BASE HIGH_ENTROPY_VA'))
-        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,--nxcompat','-Wl,--dynamicbase','-Wl,--no-high-entropy-va']), (1, executable+': failed HIGH_ENTROPY_VA'))
-        self.assertEqual(call_security_check(cc, source, executable, ['-Wl,--nxcompat','-Wl,--dynamicbase','-Wl,--high-entropy-va']), (0, ''))
 
 if __name__ == '__main__':
     unittest.main()

contrib/devtools/update-translations.py

@@ -1,4 +1,4 @@
-#!/usr/bin/env python3
+#!/usr/bin/python
 # Copyright (c) 2014 Wladimir J. van der Laan
 # Distributed under the MIT software license, see the accompanying
 # file COPYING or http://www.opensource.org/licenses/mit-license.php.
@@ -15,6 +15,7 @@ It will do the following automatically:
 TODO:
 - auto-add new translations to the build system according to the translation process
 '''
+from __future__ import division, print_function
 import subprocess
 import re
 import sys
@@ -30,19 +31,17 @@ SOURCE_LANG = 'bitcoin_en.ts'
 LOCALE_DIR = 'src/qt/locale'
 # Minimum number of messages for translation to be considered at all
 MIN_NUM_MESSAGES = 10
-# Regexp to check for Bitcoin addresses
-ADDRESS_REGEXP = re.compile('([13]|bc1)[a-zA-Z0-9]{30,}')
 
 def check_at_repository_root():
     if not os.path.exists('.git'):
         print('No .git directory found')
         print('Execute this script at the root of the repository', file=sys.stderr)
-        sys.exit(1)
+        exit(1)
 
 def fetch_all_translations():
     if subprocess.call([TX, 'pull', '-f', '-a']):
         print('Error while fetching translations', file=sys.stderr)
-        sys.exit(1)
+        exit(1)
 
 def find_format_specifiers(s):
     '''Find all format specifiers in a string.'''
@@ -66,14 +65,6 @@ def split_format_specifiers(specifiers):
         else:
             other.append(s)
 
-    # If both numeric format specifiers and "others" are used, assume we're dealing
-    # with a Qt-formatted message. In the case of Qt formatting (see https://doc.qt.io/qt-5/qstring.html#arg)
-    # only numeric formats are replaced at all. This means "(percentage: %1%)" is valid, without needing
-    # any kind of escaping that would be necessary for strprintf. Without this, this function
-    # would wrongly detect '%)' as a printf format specifier.
-    if numeric:
-        other = []
-
     # numeric (Qt) can be present in any order, others (strprintf) must be in specified order
     return set(numeric),other
 
@@ -124,12 +115,6 @@ def escape_cdata(text):
     text = text.replace('"', '"')
     return text
 
-def contains_bitcoin_addr(text, errors):
-    if text != None and ADDRESS_REGEXP.search(text) != None:
-        errors.append('Translation "%s" contains a bitcoin address. This will be removed.' % (text))
-        return True
-    return False
-
 def postprocess_translations(reduce_diff_hacks=False):
     print('Checking and postprocessing...')
 
@@ -168,7 +153,7 @@ def postprocess_translations(reduce_diff_hacks=False):
                     if translation is None:
                         continue
                     errors = []
-                    valid = check_format_specifiers(source, translation, errors, numerus) and not contains_bitcoin_addr(translation, errors)
+                    valid = check_format_specifiers(source, translation, errors, numerus)
 
                     for error in errors:
                         print('%s: %s' % (filename, error))

contrib/filter-lcov.py

@@ -1,25 +0,0 @@
-#!/usr/bin/env python3
-
-import argparse
-
-parser = argparse.ArgumentParser(description='Remove the coverage data from a tracefile for all files matching the pattern.')
-parser.add_argument('--pattern', '-p', action='append', help='the pattern of files to remove', required=True)
-parser.add_argument('tracefile', help='the tracefile to remove the coverage data from')
-parser.add_argument('outfile', help='filename for the output to be written to')
-
-args = parser.parse_args()
-tracefile = args.tracefile
-pattern = args.pattern
-outfile = args.outfile
-
-in_remove = False
-with open(tracefile, 'r', encoding="utf8") as f:
-    with open(outfile, 'w', encoding="utf8") as wf:
-        for line in f:
-            for p in pattern:
-                if line.startswith("SF:") and p in line:
-                    in_remove = True
-            if not in_remove:
-                wf.write(line)
-            if line == 'end_of_record\n':
-                in_remove = False

contrib/gitian-build.py

@@ -1,220 +0,0 @@
-#!/usr/bin/env python3
-
-import argparse
-import os
-import subprocess
-import sys
-
-def setup():
-    global args, workdir
-    programs = ['ruby', 'git', 'apt-cacher-ng', 'make', 'wget']
-    if args.kvm:
-        programs += ['python-vm-builder', 'qemu-kvm', 'qemu-utils']
-    elif args.docker:
-        dockers = ['docker.io', 'docker-ce']
-        for i in dockers:
-            return_code = subprocess.call(['sudo', 'apt-get', 'install', '-qq', i])
-            if return_code == 0:
-                break
-        if return_code != 0:
-            print('Cannot find any way to install docker', file=sys.stderr)
-            exit(1)
-    else:
-        programs += ['lxc', 'debootstrap']
-    subprocess.check_call(['sudo', 'apt-get', 'install', '-qq'] + programs)
-    if not os.path.isdir('gitian.sigs'):
-        subprocess.check_call(['git', 'clone', 'https://github.com/bitcoin-core/gitian.sigs.git'])
-    if not os.path.isdir('bitcoin-detached-sigs'):
-        subprocess.check_call(['git', 'clone', 'https://github.com/bitcoin-core/bitcoin-detached-sigs.git'])
-    if not os.path.isdir('gitian-builder'):
-        subprocess.check_call(['git', 'clone', 'https://github.com/devrandom/gitian-builder.git'])
-    if not os.path.isdir('bitcoin'):
-        subprocess.check_call(['git', 'clone', 'https://github.com/bitcoin/bitcoin.git'])
-    os.chdir('gitian-builder')
-    make_image_prog = ['bin/make-base-vm', '--suite', 'bionic', '--arch', 'amd64']
-    if args.docker:
-        make_image_prog += ['--docker']
-    elif not args.kvm:
-        make_image_prog += ['--lxc']
-    subprocess.check_call(make_image_prog)
-    os.chdir(workdir)
-    if args.is_bionic and not args.kvm and not args.docker:
-        subprocess.check_call(['sudo', 'sed', '-i', 's/lxcbr0/br0/', '/etc/default/lxc-net'])
-        print('Reboot is required')
-        exit(0)
-
-def build():
-    global args, workdir
-
-    os.makedirs('bitcoin-binaries/' + args.version, exist_ok=True)
-    print('\nBuilding Dependencies\n')
-    os.chdir('gitian-builder')
-    os.makedirs('inputs', exist_ok=True)
-
-    subprocess.check_call(['wget', '-N', '-P', 'inputs', 'http://downloads.sourceforge.net/project/osslsigncode/osslsigncode/osslsigncode-1.7.1.tar.gz'])
-    subprocess.check_call(['wget', '-N', '-P', 'inputs', 'https://bitcoincore.org/cfields/osslsigncode-Backports-to-1.7.1.patch'])
-    subprocess.check_call(['make', '-C', '../bitcoin/depends', 'download', 'SOURCES_PATH=' + os.getcwd() + '/cache/common'])
-
-    if args.linux:
-        print('\nCompiling ' + args.version + ' Linux')
-        subprocess.check_call(['bin/gbuild', '-j', args.jobs, '-m', args.memory, '--commit', 'bitcoin='+args.commit, '--url', 'bitcoin='+args.url, '../bitcoin/contrib/gitian-descriptors/gitian-linux.yml'])
-        subprocess.check_call(['bin/gsign', '-p', args.sign_prog, '--signer', args.signer, '--release', args.version+'-linux', '--destination', '../gitian.sigs/', '../bitcoin/contrib/gitian-descriptors/gitian-linux.yml'])
-        subprocess.check_call('mv build/out/bitcoin-*.tar.gz build/out/src/bitcoin-*.tar.gz ../bitcoin-binaries/'+args.version, shell=True)
-
-    if args.windows:
-        print('\nCompiling ' + args.version + ' Windows')
-        subprocess.check_call(['bin/gbuild', '-j', args.jobs, '-m', args.memory, '--commit', 'bitcoin='+args.commit, '--url', 'bitcoin='+args.url, '../bitcoin/contrib/gitian-descriptors/gitian-win.yml'])
-        subprocess.check_call(['bin/gsign', '-p', args.sign_prog, '--signer', args.signer, '--release', args.version+'-win-unsigned', '--destination', '../gitian.sigs/', '../bitcoin/contrib/gitian-descriptors/gitian-win.yml'])
-        subprocess.check_call('mv build/out/bitcoin-*-win-unsigned.tar.gz inputs/bitcoin-win-unsigned.tar.gz', shell=True)
-        subprocess.check_call('mv build/out/bitcoin-*.zip build/out/bitcoin-*.exe ../bitcoin-binaries/'+args.version, shell=True)
-
-    if args.macos:
-        print('\nCompiling ' + args.version + ' MacOS')
-        subprocess.check_call(['bin/gbuild', '-j', args.jobs, '-m', args.memory, '--commit', 'bitcoin='+args.commit, '--url', 'bitcoin='+args.url, '../bitcoin/contrib/gitian-descriptors/gitian-osx.yml'])
-        subprocess.check_call(['bin/gsign', '-p', args.sign_prog, '--signer', args.signer, '--release', args.version+'-osx-unsigned', '--destination', '../gitian.sigs/', '../bitcoin/contrib/gitian-descriptors/gitian-osx.yml'])
-        subprocess.check_call('mv build/out/bitcoin-*-osx-unsigned.tar.gz inputs/bitcoin-osx-unsigned.tar.gz', shell=True)
-        subprocess.check_call('mv build/out/bitcoin-*.tar.gz build/out/bitcoin-*.dmg ../bitcoin-binaries/'+args.version, shell=True)
-
-    os.chdir(workdir)
-
-    if args.commit_files:
-        print('\nCommitting '+args.version+' Unsigned Sigs\n')
-        os.chdir('gitian.sigs')
-        subprocess.check_call(['git', 'add', args.version+'-linux/'+args.signer])
-        subprocess.check_call(['git', 'add', args.version+'-win-unsigned/'+args.signer])
-        subprocess.check_call(['git', 'add', args.version+'-osx-unsigned/'+args.signer])
-        subprocess.check_call(['git', 'commit', '-m', 'Add '+args.version+' unsigned sigs for '+args.signer])
-        os.chdir(workdir)
-
-def sign():
-    global args, workdir
-    os.chdir('gitian-builder')
-
-    if args.windows:
-        print('\nSigning ' + args.version + ' Windows')
-        subprocess.check_call(['bin/gbuild', '-i', '--commit', 'signature='+args.commit, '../bitcoin/contrib/gitian-descriptors/gitian-win-signer.yml'])
-        subprocess.check_call(['bin/gsign', '-p', args.sign_prog, '--signer', args.signer, '--release', args.version+'-win-signed', '--destination', '../gitian.sigs/', '../bitcoin/contrib/gitian-descriptors/gitian-win-signer.yml'])
-        subprocess.check_call('mv build/out/bitcoin-*win64-setup.exe ../bitcoin-binaries/'+args.version, shell=True)
-        subprocess.check_call('mv build/out/bitcoin-*win32-setup.exe ../bitcoin-binaries/'+args.version, shell=True)
-
-    if args.macos:
-        print('\nSigning ' + args.version + ' MacOS')
-        subprocess.check_call(['bin/gbuild', '-i', '--commit', 'signature='+args.commit, '../bitcoin/contrib/gitian-descriptors/gitian-osx-signer.yml'])
-        subprocess.check_call(['bin/gsign', '-p', args.sign_prog, '--signer', args.signer, '--release', args.version+'-osx-signed', '--destination', '../gitian.sigs/', '../bitcoin/contrib/gitian-descriptors/gitian-osx-signer.yml'])
-        subprocess.check_call('mv build/out/bitcoin-osx-signed.dmg ../bitcoin-binaries/'+args.version+'/bitcoin-'+args.version+'-osx.dmg', shell=True)
-
-    os.chdir(workdir)
-
-    if args.commit_files:
-        print('\nCommitting '+args.version+' Signed Sigs\n')
-        os.chdir('gitian.sigs')
-        subprocess.check_call(['git', 'add', args.version+'-win-signed/'+args.signer])
-        subprocess.check_call(['git', 'add', args.version+'-osx-signed/'+args.signer])
-        subprocess.check_call(['git', 'commit', '-a', '-m', 'Add '+args.version+' signed binary sigs for '+args.signer])
-        os.chdir(workdir)
-
-def verify():
-    global args, workdir
-    os.chdir('gitian-builder')
-
-    print('\nVerifying v'+args.version+' Linux\n')
-    subprocess.check_call(['bin/gverify', '-v', '-d', '../gitian.sigs/', '-r', args.version+'-linux', '../bitcoin/contrib/gitian-descriptors/gitian-linux.yml'])
-    print('\nVerifying v'+args.version+' Windows\n')
-    subprocess.check_call(['bin/gverify', '-v', '-d', '../gitian.sigs/', '-r', args.version+'-win-unsigned', '../bitcoin/contrib/gitian-descriptors/gitian-win.yml'])
-    print('\nVerifying v'+args.version+' MacOS\n')
-    subprocess.check_call(['bin/gverify', '-v', '-d', '../gitian.sigs/', '-r', args.version+'-osx-unsigned', '../bitcoin/contrib/gitian-descriptors/gitian-osx.yml'])
-    print('\nVerifying v'+args.version+' Signed Windows\n')
-    subprocess.check_call(['bin/gverify', '-v', '-d', '../gitian.sigs/', '-r', args.version+'-win-signed', '../bitcoin/contrib/gitian-descriptors/gitian-win-signer.yml'])
-    print('\nVerifying v'+args.version+' Signed MacOS\n')
-    subprocess.check_call(['bin/gverify', '-v', '-d', '../gitian.sigs/', '-r', args.version+'-osx-signed', '../bitcoin/contrib/gitian-descriptors/gitian-osx-signer.yml'])
-
-    os.chdir(workdir)
-
-def main():
-    global args, workdir
-
-    parser = argparse.ArgumentParser(usage='%(prog)s [options] signer version')
-    parser.add_argument('-c', '--commit', action='store_true', dest='commit', help='Indicate that the version argument is for a commit or branch')
-    parser.add_argument('-u', '--url', dest='url', default='https://github.com/bitcoin/bitcoin', help='Specify the URL of the repository. Default is %(default)s')
-    parser.add_argument('-v', '--verify', action='store_true', dest='verify', help='Verify the Gitian build')
-    parser.add_argument('-b', '--build', action='store_true', dest='build', help='Do a Gitian build')
-    parser.add_argument('-s', '--sign', action='store_true', dest='sign', help='Make signed binaries for Windows and MacOS')
-    parser.add_argument('-B', '--buildsign', action='store_true', dest='buildsign', help='Build both signed and unsigned binaries')
-    parser.add_argument('-o', '--os', dest='os', default='lwm', help='Specify which Operating Systems the build is for. Default is %(default)s. l for Linux, w for Windows, m for MacOS')
-    parser.add_argument('-j', '--jobs', dest='jobs', default='2', help='Number of processes to use. Default %(default)s')
-    parser.add_argument('-m', '--memory', dest='memory', default='2000', help='Memory to allocate in MiB. Default %(default)s')
-    parser.add_argument('-k', '--kvm', action='store_true', dest='kvm', help='Use KVM instead of LXC')
-    parser.add_argument('-d', '--docker', action='store_true', dest='docker', help='Use Docker instead of LXC')
-    parser.add_argument('-S', '--setup', action='store_true', dest='setup', help='Set up the Gitian building environment. Uses LXC. If you want to use KVM, use the --kvm option. Only works on Debian-based systems (Ubuntu, Debian)')
-    parser.add_argument('-D', '--detach-sign', action='store_true', dest='detach_sign', help='Create the assert file for detached signing. Will not commit anything.')
-    parser.add_argument('-n', '--no-commit', action='store_false', dest='commit_files', help='Do not commit anything to git')
-    parser.add_argument('signer', help='GPG signer to sign each build assert file')
-    parser.add_argument('version', help='Version number, commit, or branch to build. If building a commit or branch, the -c option must be specified')
-
-    args = parser.parse_args()
-    workdir = os.getcwd()
-
-    args.linux = 'l' in args.os
-    args.windows = 'w' in args.os
-    args.macos = 'm' in args.os
-
-    args.is_bionic = b'bionic' in subprocess.check_output(['lsb_release', '-cs'])
-
-    if args.buildsign:
-        args.build=True
-        args.sign=True
-
-    if args.kvm and args.docker:
-        raise Exception('Error: cannot have both kvm and docker')
-
-    args.sign_prog = 'true' if args.detach_sign else 'gpg --detach-sign'
-
-    # Set enviroment variable USE_LXC or USE_DOCKER, let gitian-builder know that we use lxc or docker
-    if args.docker:
-        os.environ['USE_DOCKER'] = '1'
-    elif not args.kvm:
-        os.environ['USE_LXC'] = '1'
-        if not 'GITIAN_HOST_IP' in os.environ.keys():
-            os.environ['GITIAN_HOST_IP'] = '10.0.3.1'
-        if not 'LXC_GUEST_IP' in os.environ.keys():
-            os.environ['LXC_GUEST_IP'] = '10.0.3.5'
-
-    # Disable for MacOS if no SDK found
-    if args.macos and not os.path.isfile('gitian-builder/inputs/MacOSX10.11.sdk.tar.gz'):
-        print('Cannot build for MacOS, SDK does not exist. Will build for other OSes')
-        args.macos = False
-
-    script_name = os.path.basename(sys.argv[0])
-    # Signer and version shouldn't be empty
-    if args.signer == '':
-        print(script_name+': Missing signer.')
-        print('Try '+script_name+' --help for more information')
-        exit(1)
-    if args.version == '':
-        print(script_name+': Missing version.')
-        print('Try '+script_name+' --help for more information')
-        exit(1)
-
-    # Add leading 'v' for tags
-    args.commit = ('' if args.commit else 'v') + args.version
-    print(args.commit)
-
-    if args.setup:
-        setup()
-
-    os.chdir('bitcoin')
-    subprocess.check_call(['git', 'fetch'])
-    subprocess.check_call(['git', 'checkout', args.commit])
-    os.chdir(workdir)
-
-    if args.build:
-        build()
-
-    if args.sign:
-        sign()
-
-    if args.verify:
-        verify()
-
-if __name__ == '__main__':
-    main()

contrib/gitian-descriptors/README.md

@@ -0,0 +1,65 @@
+### Gavin's notes on getting gitian builds up and running using KVM
+
+These instructions distilled from
+[https://help.ubuntu.com/community/KVM/Installation](https://help.ubuntu.com/community/KVM/Installation).
+
+You need the right hardware: you need a 64-bit-capable CPU with hardware virtualization support (Intel VT-x or AMD-V). Not all modern CPUs support hardware virtualization.
+
+You probably need to enable hardware virtualization in your machine's BIOS.
+
+You need to be running a recent version of 64-bit-Ubuntu, and you need to install several prerequisites:
+
+	sudo apt-get install ruby apache2 git apt-cacher-ng python-vm-builder qemu-kvm
+
+Sanity checks:
+
+	sudo service apt-cacher-ng status  # Should return apt-cacher-ng is running
+	ls -l /dev/kvm   # Should show a /dev/kvm device
+
+
+Once you've got the right hardware and software:
+
+    git clone git://github.com/bitcoin/bitcoin.git
+    git clone git://github.com/devrandom/gitian-builder.git
+    mkdir gitian-builder/inputs
+    cd gitian-builder/inputs
+
+    # Create base images
+    cd gitian-builder
+    bin/make-base-vm --suite trusty --arch amd64
+    cd ..
+
+    # Get inputs (see doc/release-process.md for exact inputs needed and where to get them)
+    ...
+
+    # For further build instructions see doc/release-process.md
+    ...
+
+---------------------
+
+`gitian-builder` now also supports building using LXC. See
+[help.ubuntu.com](https://help.ubuntu.com/14.04/serverguide/lxc.html)
+for how to get LXC up and running under Ubuntu.
+
+If your main machine is a 64-bit Mac or PC with a few gigabytes of memory
+and at least 10 gigabytes of free disk space, you can `gitian-build` using
+LXC running inside a virtual machine.
+
+Here's a description of Gavin's setup on OSX 10.6:
+
+1. Download and install VirtualBox from [https://www.virtualbox.org/](https://www.virtualbox.org/)
+
+2. Download the 64-bit Ubuntu Desktop 12.04 LTS .iso CD image from
+   [http://www.ubuntu.com/](http://www.ubuntu.com/)
+
+3. Run VirtualBox and create a new virtual machine, using the Ubuntu .iso (see the [VirtualBox documentation](https://www.virtualbox.org/wiki/Documentation) for details). Create it with at least 2 gigabytes of memory and a disk that is at least 20 gigabytes big.
+
+4. Inside the running Ubuntu desktop, install:
+
+	sudo apt-get install debootstrap lxc ruby apache2 git apt-cacher-ng python-vm-builder
+
+5. Still inside Ubuntu, tell gitian-builder to use LXC, then follow the "Once you've got the right hardware and software" instructions above:
+
+	export USE_LXC=1
+	git clone git://github.com/bitcoin/bitcoin.git
+	... etc

contrib/gitian-descriptors/gitian-linux.yml

@@ -1,24 +1,24 @@
 ---
-name: "bitcoin-linux-0.17"
+name: "bitcoin-linux-0.13"
 enable_cache: true
 suites:
-- "bionic"
+- "trusty"
 architectures:
 - "amd64"
 packages:
 - "curl"
 - "g++-aarch64-linux-gnu"
-- "g++-7-aarch64-linux-gnu"
-- "gcc-7-aarch64-linux-gnu"
+- "g++-4.8-aarch64-linux-gnu"
+- "gcc-4.8-aarch64-linux-gnu"
 - "binutils-aarch64-linux-gnu"
 - "g++-arm-linux-gnueabihf"
-- "g++-7-arm-linux-gnueabihf"
-- "gcc-7-arm-linux-gnueabihf"
+- "g++-4.8-arm-linux-gnueabihf"
+- "gcc-4.8-arm-linux-gnueabihf"
 - "binutils-arm-linux-gnueabihf"
-- "g++-7-multilib"
-- "gcc-7-multilib"
+- "g++-4.8-multilib"
+- "gcc-4.8-multilib"
 - "binutils-gold"
-- "git"
+- "git-core"
 - "pkg-config"
 - "autoconf"
 - "libtool"
@@ -43,7 +43,6 @@ script: |
   HOST_LDFLAGS=-static-libstdc++
 
   export QT_RCC_TEST=1
-  export QT_RCC_SOURCE_DATE_OVERRIDE=1
   export GZIP="-9n"
   export TAR_OPTIONS="--mtime="$REFERENCE_DATE\\\ $REFERENCE_TIME""
   export TZ="UTC"
@@ -57,7 +56,7 @@ script: |
 
   function create_global_faketime_wrappers {
   for prog in ${FAKETIME_PROGS}; do
-    echo '#!/usr/bin/env bash' > ${WRAP_DIR}/${prog}
+    echo '#!/bin/bash' > ${WRAP_DIR}/${prog}
     echo "REAL=\`which -a ${prog} | grep -v ${WRAP_DIR}/${prog} | head -1\`" >> ${WRAP_DIR}/${prog}
     echo 'export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/faketime/libfaketime.so.1' >> ${WRAP_DIR}/${prog}
     echo "export FAKETIME=\"$1\"" >> ${WRAP_DIR}/${prog}
@@ -69,7 +68,7 @@ script: |
   function create_per-host_faketime_wrappers {
   for i in $HOSTS; do
     for prog in ${FAKETIME_HOST_PROGS}; do
-        echo '#!/usr/bin/env bash' > ${WRAP_DIR}/${i}-${prog}
+        echo '#!/bin/bash' > ${WRAP_DIR}/${i}-${prog}
         echo "REAL=\`which -a ${i}-${prog} | grep -v ${WRAP_DIR}/${i}-${prog} | head -1\`" >> ${WRAP_DIR}/${i}-${prog}
         echo 'export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/faketime/libfaketime.so.1' >> ${WRAP_DIR}/${i}-${prog}
         echo "export FAKETIME=\"$1\"" >> ${WRAP_DIR}/${i}-${prog}
@@ -99,7 +98,7 @@ script: |
   for prog in gcc g++; do
   rm -f ${WRAP_DIR}/${prog}
   cat << EOF > ${WRAP_DIR}/${prog}
-  #!/usr/bin/env bash
+  #!/bin/bash
   REAL="`which -a ${prog} | grep -v ${WRAP_DIR}/${prog} | head -1`"
   for var in "\$@"
   do
@@ -145,9 +144,6 @@ script: |
   find bitcoin-* | sort | tar --no-recursion --mode='u+rw,go+r-w,a+X' --owner=0 --group=0 -c -T - | gzip -9n > ../$SOURCEDIST
   popd
 
-  # Workaround for tarball not building with the bare tag version (prep)
-  make -C src obj/build.h
-
   ORIGPATH="$PATH"
   # Extract the release tarball into a dir for each host and build
   for i in ${HOSTS}; do
@@ -158,11 +154,6 @@ script: |
     mkdir -p ${INSTALLPATH}
     tar --strip-components=1 -xf ../$SOURCEDIST
 
-    # Workaround for tarball not building with the bare tag version
-    echo '#!/bin/true' >share/genbuild.sh
-    mkdir src/obj
-    cp ../src/obj/build.h src/obj/
-
     CONFIG_SITE=${BASEPREFIX}/${i}/share/config.site ./configure --prefix=/ --disable-ccache --disable-maintainer-mode --disable-dependency-tracking ${CONFIGFLAGS} CFLAGS="${HOST_CFLAGS}" CXXFLAGS="${HOST_CXXFLAGS}" LDFLAGS="${HOST_LDFLAGS}"
     make ${MAKEOPTS}
     make ${MAKEOPTS} -C src check-security

contrib/gitian-descriptors/gitian-osx-signer.yml

@@ -1,7 +1,7 @@
 ---
 name: "bitcoin-dmg-signer"
 suites:
-- "bionic"
+- "trusty"
 architectures:
 - "amd64"
 packages:
@@ -19,7 +19,7 @@ script: |
 
   # Create global faketime wrappers
   for prog in ${FAKETIME_PROGS}; do
-    echo '#!/usr/bin/env bash' > ${WRAP_DIR}/${prog}
+    echo '#!/bin/bash' > ${WRAP_DIR}/${prog}
     echo "REAL=\`which -a ${prog} | grep -v ${WRAP_DIR}/${prog} | head -1\`" >> ${WRAP_DIR}/${prog}
     echo 'export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/faketime/libfaketime.so.1' >> ${WRAP_DIR}/${prog}
     echo "export FAKETIME=\"${REFERENCE_DATETIME}\"" >> ${WRAP_DIR}/${prog}

contrib/gitian-descriptors/gitian-osx.yml

@@ -1,15 +1,15 @@
 ---
-name: "bitcoin-osx-0.17"
+name: "bitcoin-osx-0.13"
 enable_cache: true
 suites:
-- "bionic"
+- "trusty"
 architectures:
 - "amd64"
 packages:
 - "ca-certificates"
 - "curl"
 - "g++"
-- "git"
+- "git-core"
 - "pkg-config"
 - "autoconf"
 - "librsvg2-bin"
@@ -34,13 +34,12 @@ files:
 - "MacOSX10.11.sdk.tar.gz"
 script: |
   WRAP_DIR=$HOME/wrapped
-  HOSTS="x86_64-apple-darwin14"
+  HOSTS="x86_64-apple-darwin11"
   CONFIGFLAGS="--enable-reduce-exports --disable-bench --disable-gui-tests GENISOIMAGE=$WRAP_DIR/genisoimage"
   FAKETIME_HOST_PROGS=""
   FAKETIME_PROGS="ar ranlib date dmg genisoimage"
 
   export QT_RCC_TEST=1
-  export QT_RCC_SOURCE_DATE_OVERRIDE=1
   export GZIP="-9n"
   export TAR_OPTIONS="--mtime="$REFERENCE_DATE\\\ $REFERENCE_TIME""
   export TZ="UTC"
@@ -56,7 +55,7 @@ script: |
 
   function create_global_faketime_wrappers {
   for prog in ${FAKETIME_PROGS}; do
-    echo '#!/usr/bin/env bash' > ${WRAP_DIR}/${prog}
+    echo '#!/bin/bash' > ${WRAP_DIR}/${prog}
     echo "REAL=\`which -a ${prog} | grep -v ${WRAP_DIR}/${prog} | head -1\`" >> ${WRAP_DIR}/${prog}
     echo 'export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/faketime/libfaketime.so.1' >> ${WRAP_DIR}/${prog}
     echo "export FAKETIME=\"$1\"" >> ${WRAP_DIR}/${prog}
@@ -68,7 +67,7 @@ script: |
   function create_per-host_faketime_wrappers {
   for i in $HOSTS; do
     for prog in ${FAKETIME_HOST_PROGS}; do
-        echo '#!/usr/bin/env bash' > ${WRAP_DIR}/${i}-${prog}
+        echo '#!/bin/bash' > ${WRAP_DIR}/${i}-${prog}
         echo "REAL=\`which -a ${i}-${prog} | grep -v ${WRAP_DIR}/${i}-${prog} | head -1\`" >> ${WRAP_DIR}/${i}-${prog}
         echo 'export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/faketime/libfaketime.so.1' >> ${WRAP_DIR}/${i}-${prog}
         echo "export FAKETIME=\"$1\"" >> ${WRAP_DIR}/${i}-${prog}
@@ -115,9 +114,6 @@ script: |
   find bitcoin-* | sort | tar --no-recursion --mode='u+rw,go+r-w,a+X' --owner=0 --group=0 -c -T - | gzip -9n > ../$SOURCEDIST
   popd
 
-  # Workaround for tarball not building with the bare tag version (prep)
-  make -C src obj/build.h
-
   ORIGPATH="$PATH"
   # Extract the release tarball into a dir for each host and build
   for i in ${HOSTS}; do
@@ -128,11 +124,6 @@ script: |
     mkdir -p ${INSTALLPATH}
     tar --strip-components=1 -xf ../$SOURCEDIST
 
-    # Workaround for tarball not building with the bare tag version
-    echo '#!/bin/true' >share/genbuild.sh
-    mkdir src/obj
-    cp ../src/obj/build.h src/obj/
-
     CONFIG_SITE=${BASEPREFIX}/${i}/share/config.site ./configure --prefix=/ --disable-ccache --disable-maintainer-mode --disable-dependency-tracking ${CONFIGFLAGS}
     make ${MAKEOPTS}
     make install-strip DESTDIR=${INSTALLPATH}

contrib/gitian-descriptors/gitian-win-signer.yml

@@ -1,12 +1,11 @@
 ---
 name: "bitcoin-win-signer"
 suites:
-- "bionic"
+- "trusty"
 architectures:
 - "amd64"
 packages:
-# Once osslsigncode supports openssl 1.1, we can change this back to libssl-dev
-- "libssl1.0-dev"
+- "libssl-dev"
 - "autoconf"
 remotes:
 - "url": "https://github.com/bitcoin-core/bitcoin-detached-sigs.git"

contrib/gitian-descriptors/gitian-win.yml

@@ -1,14 +1,14 @@
 ---
-name: "bitcoin-win-0.17"
+name: "bitcoin-win-0.13"
 enable_cache: true
 suites:
-- "bionic"
+- "trusty"
 architectures:
 - "amd64"
 packages:
 - "curl"
 - "g++"
-- "git"
+- "git-core"
 - "pkg-config"
 - "autoconf"
 - "libtool"
@@ -21,22 +21,20 @@ packages:
 - "zip"
 - "ca-certificates"
 - "python"
-- "rename"
 remotes:
 - "url": "https://github.com/bitcoin/bitcoin.git"
   "dir": "bitcoin"
 files: []
 script: |
   WRAP_DIR=$HOME/wrapped
-  HOSTS="i686-w64-mingw32 x86_64-w64-mingw32"
+  HOSTS="x86_64-w64-mingw32 i686-w64-mingw32"
   CONFIGFLAGS="--enable-reduce-exports --disable-bench --disable-gui-tests"
-  FAKETIME_HOST_PROGS="ar ranlib nm windres strip objcopy"
+  FAKETIME_HOST_PROGS="g++ ar ranlib nm windres strip objcopy"
   FAKETIME_PROGS="date makensis zip"
   HOST_CFLAGS="-O2 -g"
   HOST_CXXFLAGS="-O2 -g"
 
   export QT_RCC_TEST=1
-  export QT_RCC_SOURCE_DATE_OVERRIDE=1
   export GZIP="-9n"
   export TAR_OPTIONS="--mtime="$REFERENCE_DATE\\\ $REFERENCE_TIME""
   export TZ="UTC"
@@ -50,7 +48,7 @@ script: |
 
   function create_global_faketime_wrappers {
   for prog in ${FAKETIME_PROGS}; do
-    echo '#!/usr/bin/env bash' > ${WRAP_DIR}/${prog}
+    echo '#!/bin/bash' > ${WRAP_DIR}/${prog}
     echo "REAL=\`which -a ${prog} | grep -v ${WRAP_DIR}/${prog} | head -1\`" >> ${WRAP_DIR}/${prog}
     echo 'export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/faketime/libfaketime.so.1' >> ${WRAP_DIR}/${prog}
     echo "export FAKETIME=\"$1\"" >> ${WRAP_DIR}/${prog}
@@ -62,7 +60,7 @@ script: |
   function create_per-host_faketime_wrappers {
   for i in $HOSTS; do
     for prog in ${FAKETIME_HOST_PROGS}; do
-        echo '#!/usr/bin/env bash' > ${WRAP_DIR}/${i}-${prog}
+        echo '#!/bin/bash' > ${WRAP_DIR}/${i}-${prog}
         echo "REAL=\`which -a ${i}-${prog} | grep -v ${WRAP_DIR}/${i}-${prog} | head -1\`" >> ${WRAP_DIR}/${i}-${prog}
         echo 'export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/faketime/libfaketime.so.1' >> ${WRAP_DIR}/${i}-${prog}
         echo "export FAKETIME=\"$1\"" >> ${WRAP_DIR}/${i}-${prog}
@@ -78,15 +76,15 @@ script: |
   for i in $HOSTS; do
     mkdir -p ${WRAP_DIR}/${i}
     for prog in collect2; do
-        echo '#!/usr/bin/env bash' > ${WRAP_DIR}/${i}/${prog}
+        echo '#!/bin/bash' > ${WRAP_DIR}/${i}/${prog}
         REAL=$(${i}-gcc -print-prog-name=${prog})
         echo "export MALLOC_PERTURB_=255" >> ${WRAP_DIR}/${i}/${prog}
         echo "${REAL} \$@" >> $WRAP_DIR/${i}/${prog}
         chmod +x ${WRAP_DIR}/${i}/${prog}
     done
     for prog in gcc g++; do
-        echo '#!/usr/bin/env bash' > ${WRAP_DIR}/${i}-${prog}
-        echo "REAL=\`which -a ${i}-${prog}-posix | grep -v ${WRAP_DIR}/${i}-${prog} | head -1\`" >> ${WRAP_DIR}/${i}-${prog}
+        echo '#!/bin/bash' > ${WRAP_DIR}/${i}-${prog}
+        echo "REAL=\`which -a ${i}-${prog} | grep -v ${WRAP_DIR}/${i}-${prog} | head -1\`" >> ${WRAP_DIR}/${i}-${prog}
         echo 'export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/faketime/libfaketime.so.1' >> ${WRAP_DIR}/${i}-${prog}
         echo "export FAKETIME=\"$1\"" >> ${WRAP_DIR}/${i}-${prog}
         echo "export COMPILER_PATH=${WRAP_DIR}/${i}" >> ${WRAP_DIR}/${i}-${prog}
@@ -133,9 +131,6 @@ script: |
   cp ../$SOURCEDIST $OUTDIR/src
   popd
 
-  # Workaround for tarball not building with the bare tag version (prep)
-  make -C src obj/build.h
-
   ORIGPATH="$PATH"
   # Extract the release tarball into a dir for each host and build
   for i in ${HOSTS}; do
@@ -146,17 +141,11 @@ script: |
     mkdir -p ${INSTALLPATH}
     tar --strip-components=1 -xf ../$SOURCEDIST
 
-    # Workaround for tarball not building with the bare tag version
-    echo '#!/bin/true' >share/genbuild.sh
-    mkdir src/obj
-    cp ../src/obj/build.h src/obj/
-
     CONFIG_SITE=${BASEPREFIX}/${i}/share/config.site ./configure --prefix=/ --disable-ccache --disable-maintainer-mode --disable-dependency-tracking ${CONFIGFLAGS} CFLAGS="${HOST_CFLAGS}" CXXFLAGS="${HOST_CXXFLAGS}"
     make ${MAKEOPTS}
     make ${MAKEOPTS} -C src check-security
     make deploy
     make install DESTDIR=${INSTALLPATH}
-    rename 's/-setup\.exe$/-setup-unsigned.exe/' *-setup.exe
     cp -f bitcoin-*setup*.exe $OUTDIR/
     cd installed
     mv ${DISTNAME}/bin/*.dll ${DISTNAME}/lib/
@@ -170,11 +159,9 @@ script: |
     cd ../../
     rm -rf distsrc-${i}
   done
-  cp -rf contrib/windeploy $BUILD_DIR
-  cd $BUILD_DIR/windeploy
-  mkdir unsigned
-  cp $OUTDIR/bitcoin-*setup-unsigned.exe unsigned/
-  find . | sort | tar --no-recursion --mode='u+rw,go+r-w,a+X' --owner=0 --group=0 -c -T - | gzip -9n > ${OUTDIR}/${DISTNAME}-win-unsigned.tar.gz
+  cd $OUTDIR
+  rename 's/-setup\.exe$/-setup-unsigned.exe/' *-setup.exe
+  find . -name "*-setup-unsigned.exe" | sort | tar --no-recursion --mode='u+rw,go+r-w,a+X' --owner=0 --group=0 -c -T - | gzip -9n > ${OUTDIR}/${DISTNAME}-win-unsigned.tar.gz
   mv ${OUTDIR}/${DISTNAME}-x86_64-*-debug.zip ${OUTDIR}/${DISTNAME}-win64-debug.zip
   mv ${OUTDIR}/${DISTNAME}-i686-*-debug.zip ${OUTDIR}/${DISTNAME}-win32-debug.zip
   mv ${OUTDIR}/${DISTNAME}-x86_64-*.zip ${OUTDIR}/${DISTNAME}-win64.zip

contrib/gitian-keys/README.md

@@ -1,27 +0,0 @@
-## PGP keys of Gitian builders and Developers
-
-The file `keys.txt` contains fingerprints of the public keys of Gitian builders
-and active developers.
-
-The associated keys are mainly used to sign git commits or the build results
-of Gitian builds.
-
-The most recent version of each pgp key can be found on most pgp key servers.
-
-Fetch the latest version from the key server to see if any key was revoked in
-the meantime.
-To fetch the latest version of all pgp keys in your gpg homedir,
-
-```sh
-gpg --refresh-keys
-```
-
-To fetch keys of Gitian builders and active developers, feed the list of
-fingerprints of the primary keys into gpg:
-
-```sh
-while read fingerprint keyholder_name; do gpg --keyserver hkp://subset.pool.sks-keyservers.net --recv-keys ${fingerprint}; done < ./keys.txt
-```
-
-Add your key to the list if you provided Gitian signatures for two major or
-minor releases of Bitcoin Core.

contrib/gitian-keys/achow101-key.pgp

@@ -0,0 +1,52 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1
+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+=+hz7
+-----END PGP PUBLIC KEY BLOCK-----

contrib/gitian-keys/centaur1-key.pgp

@@ -0,0 +1,30 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1.4.12 (GNU/Linux)
+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+=vtNZ
+-----END PGP PUBLIC KEY BLOCK-----

contrib/gitian-keys/cfields-key.pgp

@@ -0,0 +1,52 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1.4.12 (GNU/Linux)
+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+=DE4h
+-----END PGP PUBLIC KEY BLOCK-----

contrib/gitian-keys/fanquake-key.pgp

@@ -0,0 +1,63 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG/MacGPG2 v2.0.26
+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+=3o2I
+-----END PGP PUBLIC KEY BLOCK-----

contrib/gitian-keys/jl2012-key.pgp

@@ -0,0 +1,275 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: SKS 1.1.5
+Comment: Hostname: pgp.mit.edu
+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+=j8C/
+-----END PGP PUBLIC KEY BLOCK-----

contrib/gitian-keys/jonasschnelli-key.pgp

@@ -0,0 +1,110 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1
+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+=ZVPf
+-----END PGP PUBLIC KEY BLOCK-----

contrib/gitian-keys/keys.txt

@@ -1,30 +0,0 @@
-617C90010B3BD370B0AC7D424BB42E31C79111B8 Akira Takizawa
-E944AE667CF960B1004BC32FCA662BE18B877A60 Andreas Schildbach
-152812300785C96444D3334D17565732E08E5E41 Andrew Chow
-912FD3228387123DC97E0E57D5566241A0295FA9 BtcDrak
-C519EBCF3B926298946783EFF6430754120EC2F4 Christian Decker (cdecker)
-F20F56EF6A067F70E8A5C99FFF95FAA971697405 centaur
-C060A6635913D98A3587D7DB1C2491FFEB0EF770 Cory Fields
-BF6273FAEF7CC0BA1F562E50989F6B3048A116B5 Dev Random
-9A1689B60D1B3CCE9262307A2F40A9BF167FBA47 Erik Mossberg (erkmos)
-D35176BE9264832E4ACA8986BF0792FBE95DC863 fivepiece
-01CDF4627A3B88AAE4A571C87588242FBE38D3A8 Gavin Andresen
-D3CC177286005BB8FF673294C5242A1AB3936517 jl2012
-32EE5C4C3FA15CCADB46ABE529D4BCB6416F53EC Jonas Schnelli
-4B4E840451149DD7FB0D633477DFAB5C3108B9A8 Jorge Timon
-C42AFF7C61B3E44A1454CD3557AF762DB3353322 Karl-Johan Alm (kallewoof)
-E463A93F5F3117EEDE6C7316BD02942421F4889F Luke Dashjr
-B8B3F1C0E58C15DB6A81D30C3648A882F4316B9B Marco Falke
-07DF3E57A548CCFB7530709189BBB8663E2E65CE Matt Corallo (BlueMatt)
-CA03882CB1FC067B5D3ACFE4D300116E1C875A3D MeshCollider
-E777299FC265DD04793070EB944D35F9AC3DB76A Michael Ford
-9692B91BBF0E8D34DFD33B1882C5C009628ECF0C Michagogo
-77E72E69DA7EE0A148C06B21B34821D4944DE5F7 Nils Schneider
-D62A803E27E7F43486035ADBBCD04D8E9CCCAC2A Paul Rabahy
-37EC7D7B0A217CDB4B4E007E7FAB114267E4FA04 Peter Todd
-D762373D24904A3E42F33B08B9A408E71DAAC974 Pieter Wuille (Location: Leuven, Belgium)
-133EAC179436F14A5CF1B794860FEB804E669320 Pieter Wuille
-ED9BDF7AD6A55E232E84524257FF9BDBCC301009 Sjors Provoost
-AEC1884398647C47413C1C3FB1179EB7347DC10D Warren Togami
-79D00BAC68B56D422F945A8F8E3A8F3247DBCBBF Willy Ko
-71A3B16735405025D447E8F274810B012346C9A6 Wladimir J. van der Laan

contrib/gitian-keys/laanwj-key.pgp

@@ -0,0 +1,28 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: SKS 1.1.0
+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+=si/k
+-----END PGP PUBLIC KEY BLOCK-----

contrib/gitian-keys/marcofalke-key.pgp

@@ -0,0 +1,69 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1
+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=
+=GC3s
+-----END PGP PUBLIC KEY BLOCK-----

contrib/gitian-keys/michagogo-key.pgp

@@ -0,0 +1,59 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1.4.12 (GNU/Linux)
+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+=jyQ4
+-----END PGP PUBLIC KEY BLOCK-----

contrib/gitian-keys/prab-key.pgp

@@ -0,0 +1,81 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v2
+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+=dOwX
+-----END PGP PUBLIC KEY BLOCK-----

contrib/gitian-keys/wtogami-key.pgp

@@ -0,0 +1,131 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1.4.13 (GNU/Linux)
+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+=icdI
+-----END PGP PUBLIC KEY BLOCK-----

contrib/init/README.md

@@ -1,12 +1,12 @@
 Sample configuration files for:
-```
+
 SystemD: bitcoind.service
 Upstart: bitcoind.conf
 OpenRC:  bitcoind.openrc
          bitcoind.openrcconf
 CentOS:  bitcoind.init
-macOS:    org.bitcoin.bitcoind.plist
-```
+OS X:    org.bitcoin.bitcoind.plist
+
 have been made available to assist packagers in creating node packages here.
 
 See doc/init.md for more information.

contrib/init/bitcoind.conf

@@ -30,12 +30,12 @@ pre-start script
         echo
         echo "This password is security critical to securing wallets "
         echo "and must not be the same as the rpcuser setting."
-        echo "You can generate a suitable random password using the following "
+        echo "You can generate a suitable random password using the following"
         echo "command from the shell:"
         echo
         echo "bash -c 'tr -dc a-zA-Z0-9 < /dev/urandom | head -c32 && echo'"
         echo
-        echo "It is recommended that you also set alertnotify so you are "
+        echo "It is also recommended that you also set alertnotify so you are "
         echo "notified of problems:"
         echo
         echo "ie: alertnotify=echo %%s | mail -s \"Bitcoin Alert\"" \

contrib/init/bitcoind.init

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 #
 #  bitcoind The bitcoin core server.
 #

contrib/init/bitcoind.openrc

@@ -1,4 +1,4 @@
-#!/sbin/openrc-run
+#!/sbin/runscript
 
 # backward compatibility for existing gentoo layout 
 #
@@ -76,12 +76,12 @@ checkconfig()
 		eerror ""
 		eerror "This password is security critical to securing wallets "
 		eerror "and must not be the same as the rpcuser setting."
-		eerror "You can generate a suitable random password using the following "
+		eerror "You can generate a suitable random password using the following"
 		eerror "command from the shell:"
 		eerror ""
 		eerror "bash -c 'tr -dc a-zA-Z0-9 < /dev/urandom | head -c32 && echo'"
 		eerror ""
-		eerror "It is recommended that you also set alertnotify so you are "
+		eerror "It is also recommended that you also set alertnotify so you are "
 		eerror "notified of problems:"
 		eerror ""
 		eerror "ie: alertnotify=echo %%s | mail -s \"Bitcoin Alert\"" \

contrib/init/bitcoind.openrcconf

@@ -23,7 +23,7 @@
 #BITCOIND_NICE=0
 
 # Additional options (avoid -conf and -datadir, use flags above)
-#BITCOIND_OPTS=""
+BITCOIND_OPTS="-disablewallet"
 
 # The timeout in seconds OpenRC will wait for bitcoind to terminate
 # after a SIGTERM has been raised.

contrib/init/bitcoind.service

@@ -1,44 +1,22 @@
-# It is not recommended to modify this file in-place, because it will
-# be overwritten during package upgrades. If you want to add further
-# options or overwrite existing ones then use
-# $ systemctl edit bitcoind.service
-# See "man systemd.service" for details.
-
-# Note that almost all daemon options could be specified in
-# /etc/bitcoin/bitcoin.conf
-
 [Unit]
-Description=Bitcoin daemon
+Description=Bitcoin's distributed currency daemon
 After=network.target
 
 [Service]
-ExecStart=/usr/bin/bitcoind -daemon -conf=/etc/bitcoin/bitcoin.conf -pid=/run/bitcoind/bitcoind.pid
-# Creates /run/bitcoind owned by bitcoin
-RuntimeDirectory=bitcoind
 User=bitcoin
+Group=bitcoin
+
 Type=forking
-PIDFile=/run/bitcoind/bitcoind.pid
-Restart=on-failure
+PIDFile=/var/lib/bitcoind/bitcoind.pid
+ExecStart=/usr/bin/bitcoind -daemon -pid=/var/lib/bitcoind/bitcoind.pid \
+-conf=/etc/bitcoin/bitcoin.conf -datadir=/var/lib/bitcoind -disablewallet
 
-# Hardening measures
-####################
-
-# Provide a private /tmp and /var/tmp.
+Restart=always
 PrivateTmp=true
-
-# Mount /usr, /boot/ and /etc read-only for the process.
-ProtectSystem=full
-
-# Disallow the process and all of its children to gain
-# new privileges through execve().
-NoNewPrivileges=true
-
-# Use a new /dev namespace only populated with API pseudo devices
-# such as /dev/null, /dev/zero and /dev/random.
-PrivateDevices=true
-
-# Deny the creation of writable and executable memory mappings.
-MemoryDenyWriteExecute=true
+TimeoutStopSec=60s
+TimeoutStartSec=2s
+StartLimitInterval=120s
+StartLimitBurst=5
 
 [Install]
 WantedBy=multi-user.target

contrib/init/org.bitcoin.bitcoind.plist

@@ -7,6 +7,7 @@
 	<key>ProgramArguments</key>
 	<array>
 		<string>/usr/local/bin/bitcoind</string>
+		<string>-daemon</string>
 	</array>
 	<key>RunAtLoad</key>
 	<true/>