2f58589 Mention dump/import support for HD wallets (Pieter Wuille)
fe20b83 Remove refactors from list of changes (Pieter Wuille)
7f84015 Inline mempool RPCs and feefilter into misc sections (Pieter Wuille)
- Ignore GETBLOCKTXN requests for unknown blocks
Don't disconnect peers, or else we leak information that could be
used for fingerprinting.
- Ignore CMPCTBLOCK messages for pruned blocks
Also ignores CMPCTBLOCK announcements that have too little work. This is to
prevent disk-exhaustion DoS.
Github-Pull: #8408
Rebased-From: 1de2a466321d06e49834
de45c06 [Wallet] Add CKeyMetadata record for HDMasterKey(s), factor out HD key generation (Jonas Schnelli)
f142c11 [0.13] Create a new HD seed after encrypting the wallet (Jonas Schnelli)
The non-deterministic ordering produced by biplist ends up in the .DS_Store
file that is included in the OSX dmg.
Github-Pull: #8373
Rebased-From: 3b3ce25df6
7945088 [Wallet] comsetic non-code changes for the HD feature (Jonas Schnelli)
68d7682 [Wallet] ensure CKeyMetadata.hdMasterKeyID will be cleared during SetNull() (Jonas Schnelli)
f708085 [QA] extend wallet-hd test to cover HD metadata (Jonas Schnelli)
986c223 [Wallet] print hd masterkeyid in getwalletinfo (Jonas Schnelli)
b1c7b24 [Wallet] report optional HDKeypath/HDMasterKeyId in validateaddress (Jonas Schnelli)
5b95dd2 [Wallet] extend CKeyMetadata with HD keypath (Jonas Schnelli)
46c9620 Test that unnecessary witnesses can't be used for mempool DoS (Suhas Daftuar)
bb66a11 Fix DoS vulnerability in mempool acceptance (Suhas Daftuar)
When processing a headers message that looks like a block announcement,
send peer a getheaders if the headers message won't connect.
Apply DoS points after too many consecutive unconnecting headers messages.
C_INCLUDE_PATH and CPLUS_INCLUDE_PATH work globally as though -isystem was used
for each invocation.
Since that changes the build results, force a rebuild of x86 depends by adding
the value to $HOST_ID_SALT.
Moves the IsStandard check to happen after the premature-witness check,
so that adding a witness to a transaction can't prevent mempool acceptance.
Note that this doesn't address the broader category of potential mempool DoS
issues that affect transactions after segwit activation.
- guard PKG_PROG_PKG_CONFIG with an m4_ifdef. If not building for windows,
require it
- add nops as necessary in case the ifdef reduces the if/then to nothing
- AC_SUBST some missing _LIBS. These were split out over time, but not all were
properly substituted. They continued to work if pkg-config is installed
because it does the AC_SUBST itself
The non-pkg-config case can't use pkg-config to check the version.
Also, make sure that the check is properly guarded in the case of missing
pkg-config macros.
* separate completion for bitcoind and bitcoin-cli
* remove RPC support from bitcoind completion
* add completion for bitcoin-tx and bitcoin-qt
* rely on autoloading of completions
Also cap the allocation for the leveldb-specific cache for the UTXO set
to 8MiB.
This avoids that the extra cache memory goes to the much less effective
leveldb cache instead of our application-level cache.
This reverts PR #4906, "Coinselection prunes extraneous inputs from
ApproximateBestSubset".
Apparently the previous behavior of slightly over-estimating the set of
inputs was useful in cleaning up UTXOs.
See also #7664, #7657, as well as 2016-07-01 discussion on #bitcoin-core-dev IRC.
975a41d windows: Add testnet icon for testnet link (Wladimir J. van der Laan)
0ce8e99 windows: Add testnet link to installer (Wladimir J. van der Laan)
Generate an (invalid) example address for in the bitcoin address
widgets, based on the network prefix, instead of hardcoding a mainnet
address.
- `1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L` for mainnet (same as now)
- `n2wxQmfexkjwEPgdD6iJA7T7RtzkmHxhFc` for testnet
mininode now supports witness transactions/blocks, blocktools
has a helper for adding witness commitments to blocks, and script
has a function to calculate hashes for signature under sigversion
1, used by segwit.
Py3 conversion by Marco Falke
Test to make sure upgraded nodes don't ask for non-wit blocks by
Gregory Sanders.
script_tests: always test bitcoinconsensus_verify_script_with_amount if VERIFY_WITNESS isn't set
Rename internal method + make it static
trim bitcoinconsensus_ prefix
Add SERIALIZE_TRANSACTION_WITNESS flag
06f40ef depends: Mention aarch64 as common cross-compile target (Wladimir J. van der Laan)
05f64c9 doc: Mention Linux ARM builds in release notes (Wladimir J. van der Laan)
b7bf037 doc: Mention ARM executables in release process (Wladimir J. van der Laan)
48efec8 Fix some minor compact block issues that came up in review (Matt Corallo)
ccd06b9 Elaborate bucket size math (Pieter Wuille)
0d4cb48 Use vTxHashes to optimize InitData significantly (Matt Corallo)
8119026 Provide a flat list of txid/terators to txn in CTxMemPool (Matt Corallo)
678ee97 Add BIP 152 to implemented BIPs list (Matt Corallo)
56ba516 Add reconstruction debug logging (Matt Corallo)
2f34a2e Get our "best three" peers to announce blocks using cmpctblocks (Matt Corallo)
927f8ee Add ability to fetch CNode by NodeId (Matt Corallo)
d25cd3e Add receiver-side protocol implementation for CMPCTBLOCK stuff (Matt Corallo)
9c837d5 Add sender-side protocol implementation for CMPCTBLOCK stuff (Matt Corallo)
00c4078 Add protocol messages for short-ids blocks (Matt Corallo)
e3b2222 Add some blockencodings tests (Matt Corallo)
f4f8f14 Add TestMemPoolEntryHelper::FromTx version for CTransaction (Matt Corallo)
85ad31e Add partial-block block encodings API (Matt Corallo)
5249dac Add COMPACTSIZE wrapper similar to VARINT for serialization (Matt Corallo)
cbda71c Move context-required checks from CheckBlockHeader to Contextual... (Matt Corallo)
7c29ec9 If AcceptBlockHeader returns true, pindex will be set. (Matt Corallo)
96806c3 Stop trimming when mapTx is empty (Pieter Wuille)
Pulls in the following new languages:
- `af` Afrikaans
- `es_419` Spanish (Latin America)
- `es_AR` Spanish (Argentina)
- `es_CO` Spanish (Colombia)
- `fil` Filipino
- `it_IT` Italian (Italy)
- `ro` Romanian
- `sr@latin` Serbian (Latin)
- `ta` Tamil
- `uz@Latn` Uzbek (Latin)
- `zh_HK` Chinese (Hong Kong)
Mention ARM executables in the release process documentation
(these were introduced in #8188).
As well as that Linux tarballs have changed name to contain an
architecture tuple, instead of `linux32`/`linux64`.
Also mention that `-debug` files should not be uploaded (these were
introduced in #8167).
54326a6 Increase maximum orphan size to 100,000 bytes. (Gregory Maxwell)
8c99d1b Treat orphans as implicit inv for parents, discard when parents rejected. (Gregory Maxwell)
11cc143 Adds an expiration time for orphan tx. (Gregory Maxwell)
db0ffe8 This eliminates the primary leak that causes the orphan map to always grow to its maximum size. (Gregory Maxwell)
1b0bcc5 Track orphan by prev COutPoint rather than prev hash (Pieter Wuille)
1e9aab0 Remove sipa's old revoked key from verify-commits (Peter Todd)
966151e Add README for verify-commits (Peter Todd)
11164ec Remove keys that are no longer used for merging (Peter Todd)
22421fa Remove pointless warning (Peter Todd)
9523e8a Make verify-commits path-independent (Matt Corallo)
f7d4a25 Make verify-commits POSIX-compliant (Matt Corallo)
Now that the trusted root is past all commits signed by that key we don't need
it in the trusted-keys list, nor do we need to whitelist those commits in
allow-revsig-commits
7982fce doc: Mention full UTF-8 support in release notes (Wladimir J. van der Laan)
6bbb4ef test: test utf-8 for labels in wallet (Wladimir J. van der Laan)
a406fcb test: add ensure_ascii setting to AuthServiceProxy (Wladimir J. van der Laan)
60ab9b2 Squashed 'src/univalue/' changes from 2740c4f..f32df99 (Wladimir J. van der Laan)
1a5a4e6 Randomize name lookup result in ConnectSocketByName (Pieter Wuille)
f9f5cfc Prevent duplicate connections where one is by name and another by ip (Pieter Wuille)
1111b80 Rework addnode behaviour (Pieter Wuille)
6ee7f05 Allow disconnecting a netgroup with only one member in eviction. (Gregory Maxwell)
5d0ca81 Add recently accepted blocks and txn to AttemptToEvictConnection. (Gregory Maxwell)
An orphan whos parents were rejected is never going to connect, so there
is little utility in keeping it.
Orphans also helpfully tell us what we're missing, so go ahead and treat
it as INVed.
This prevents higher order orphans and other junk from
holding positions in the orphan map. Parents delayed
twenty minutes are more are unlikely to ever arrive.
The freed space will improve the orphan matching success rate for
other transactions.
As per meeting 2016-03-31
https://bitcoincore.org/en/meetings/2016/03/31/#bad-chain-alerts
The partition checker was producing huge number of false-positives
and was disabled in 0.12.1 on the understanding it would either be
fixed in 0.13 or removed entirely from master if not.
* Use CNode::addeName to track whether a connection to a name is already open
* A new connection to a previously-connected by-name addednode is only opened when
the previous one closes (even if the name starts resolving to something else)
* At most one connection is opened per addednode (even if the name resolves to multiple)
* Unify the code between ThreadOpenAddedNodeConnections and getaddednodeinfo
* Information about open connections is always returned, and the dns argument becomes a dummy
* An IP address and inbound/outbound is only reported for the (at most 1) open connection
In the Receive 'Tab' of the QT wallet, when 'Show'ing a previously requested payment, add a label underneath the QR Code showing the bitcoin address where the funds will go to.
This way the user can be sure that the QR code scanner app the user using is reading the correct bitcoin address, preventing funds to be stolen.
Includes fix for HiDPI screens by @jonasschnelli.
ff2dcf2 Tests: Edit bloated varint test and add option for 'barely expensive' tests (mrbandrews)
12c5a16 Catch exceptions from non-canonical encoding and print only to log (mrbandrews)
291f8aa Continuing port of java comptool (mrbandrews)
8c9e681 Tests: Rework blockstore to avoid re-serialization. (mrbandrews)
c2dd5a3 FIX: correctly measure size of priority block (Alex Morcos)
a278764 FIX: Account for txs already added to block in addPriorityTxs (Alex Morcos)
4dc94d1 Refactor CreateNewBlock to be a method of the BlockAssembler class (Alex Morcos)
always grow to its maximum size.
This does not go so far as to attempt to connect orphans made
connectable by a new block.
Keeping the orphan map less full helps improve the reliability
of relaying chains of transactions.
Add a setting ensure_ascii to AuthServiceProxy. This setting,
defaulting to True (backwards compatible),
is passed through to json.dumps. If set to False, non-ASCII characters
>0x80 are not escaped. This is useful for testing server
input processing, as well as slightly more bandwidth friendly in case of
heavy unicode usage.
- create a script to handle split debug. This will also eventually need to check
targets, and use dsymutil for osx.
- update config.guess/config.sub for bdb for aarch64.
- temporarily disable symbol checks for arm/aarch64
- quit renaming to linux32/linux64 and use the host directly
This also adds a hack to work around an Ubuntu bug in the gcc-multilib package:
https://bugs.launchpad.net/ubuntu/+source/gcc-defaults-armhf-cross/+bug/1347820
The problem is that gcc-multilib conflicts with the aarch toolchain.
gcc-multilib installs a symlink that points
/usr/include/asm -> /usr/include/x86_64-linux-gnu/asm.
Without this link, gcc -m32 can't find asm/errno.h (and others), since
/usr/include/x86_64-linux-gnu isn't in its default include path. But
/usr/include/i386-linux-gnu is (though it doesn't exist on disk).
So work around the problem by linking
/usr/include/i386-linux-gnu/asm -> /usr/include/x86_64-linux-gnu/asm.
The symlink fix is actually quite reasonable, but echoing the password into
sudo is nasty, and should probably be addressed in gitian itself. It makes more
sense to enable passwordless sudo for the build user by default.
Putting the build date in the executable is a practice that has no place
in these days, now that deterministic building is increasingly common.
Continues #7732 which did this for the GUI.
7e7eb27 gitian: create debug packages for linux/windows (Cory Fields)
ad38204 gitian: use CONFIG_SITE rather than hijacking the prefix (Cory Fields)
b676f38 depends: allow for CONFIG_SITE to be used rather than stealing prefix (Cory Fields)
eebc232 test: Add more test vectors for siphash (Wladimir J. van der Laan)
8884830 Use C++11 thread-safe static initializers (Pieter Wuille)
c31b24f Use 64-bit SipHash of netgroups in eviction (Pieter Wuille)
9bf156b Support SipHash with arbitrary byte writes (Pieter Wuille)
053930f Avoid recalculating vchKeyedNetGroup in eviction logic. (Patrick Strateman)
288d85d Get rid of CTxMempool::lookup() entirely (Pieter Wuille)
c2a4724 Optimization: use usec in expiration and reuse nNow (Pieter Wuille)
e9b4780 Optimization: don't check the mempool at all if no mempool req ever (Pieter Wuille)
dbfb426 Optimize the relay map to use shared_ptr's (Pieter Wuille)
8d39d7a Switch CTransaction storage in mempool to std::shared_ptr (Pieter Wuille)
1b9e6d3 Add support for unique_ptr and shared_ptr to memusage (Pieter Wuille)
6182d10 Do not increment nAttempts by more than one for every Good connection. (Gregory Maxwell)
c769c4a Avoid counting failed connect attempts when probably offline. (Gregory Maxwell)
3d3602f Add RPC test for the p2p mempool command in conjunction with disabled bloomfilters (Jonas Schnelli)
beceac9 Disable the mempool P2P command when bloom filters disabled (Peter Todd)
Add error and range-checking parsers for unsigned 32 and 64 bit numbers.
The 32-bit variant is required for parsing sequence numbers from the
command line in `bitcoin-tx` (see #8164 for discussion). I've thrown in
the 64-bit variant as a bonus, as I'm sure it will be needed at some
point.
Also adds tests, and updates `developer-notes.md`.
The -debug tarballs/zips contain detached debugging symbols. To use them, place
in the same dir as the target binary, and invoke gdb as usual.
Also, because the debug symbols add a substantial space requirement, the build
dirs are now deleted when they're no longer needed.
This does not break any existing prefix behavior, only makes new behavior work.
For example:
CONFIG_SITE=$PWD/depends/x86_64-pc-linux-gnu/share/config.site ./configure --prefix=/
ae357d5 [Bitcoin-Tx] Add tests for sequence number support (Jonas Schnelli)
e59336f [bitcoin-tx] allow to set nSequence number over the in= command (Jonas Schnelli)
a946bb6 [RPC] createrawtransaction: add option to set the sequence number per input (Jonas Schnelli)
Also introduce UniValueType
UniValueType is a wrapper for UniValue::VType which allows setting
a typeAny flag. This flag indicates the type does not matter.
(Used by RPCTypeCheckObj)
We send a newly-accepted peer a 1000-entry addr message, and then only use
vAddrToSend for small messages. Deallocate vAddrToSend after it's been used for
the big message to save about 40 kB per connected inbound peer.
- BIP9DeploymentInfo struct for static deployment info
- VersionBitsDeploymentInfo: Avoid C++11ism by commenting parameter names
- getblocktemplate: Make sure to set deployments in the version if it is LOCKED_IN
- In this commit, all rules are considered required for clients to support
Change authentication order to make it more clear (see #7700).
- If the `-torpassword` option is provided, force use of
`HASHEDPASSWORD` auth.
- Give error message if `-torpassword` provided, but
`HASHEDPASSWORD` auth is not available.
- Give error message if only `HASHEDPASSWORD` available, but
`-torpassword` not given.
* Switch mapRelay to use shared_ptr<CTransaction>
* Switch the relay code to copy mempool shared_ptr's, rather than copying
the transaction itself.
* Change vRelayExpiration to store mapRelay iterators rather than hashes
(smaller and faster).
Optimistically test the latch bool before taking the lock.
For all IsInitialBlockDownload calls after the first to return false,
this avoids the need to lock cs_main.
This was caused by an pyc files hanging around from previous
python2 invocations, when the matching .py missing from that path.
This should not be a problem with python3's tagged caches.
Saves about 10% of application memory usage once the mempool warms up. Since the
mempool is DynamicUsage-regulated, this will translate to a larger mempool in
the same amount of space.
Map value type: eliminate the vin index; no users of the map need to know which
input of the transaction is spending the prevout.
Map key type: replace the COutPoint with a pointer to a COutPoint. A COutPoint
is 36 bytes, but each COutPoint is accessible from the same map entry's value.
A trivial DereferencingComparator functor allows indirect map keys, but the
resulting syntax is misleading: `map.find(&outpoint)`. Implement an indirectmap
that acts as a wrapper to a map that uses a DereferencingComparator, supporting
a syntax that accurately reflect the container's semantics: inserts and
iterators use pointers since they store pointers and need them to remain
constant and dereferenceable, but lookup functions take const references.
269a440 Add test for dbwrapper iterators with same-prefix keys. (Matt Corallo)
6030625 test: Add more thorough test for dbwrapper iterators (Wladimir J. van der Laan)
84c13e7 chain: Add assertion in case of missing records in index db (Wladimir J. van der Laan)
Before this, if someone imported a scriptPubKey directly (in hex form) using
importaddress, outputs sending to it would be treated as change, as the
corresponding CTxDestination was not added to the address book.
Fix this by trying to detect scriptPubKeys that are in fact convertible to a
CTxDestination and add them anyway. Add a warning to the RPC help to warn
against importing raw non-standard scripts.
- Link pull-tester/rpc-tests.py to the build dir
- Add the build-dir's config to the python path so that tests can find it
- The tests themselves are in srcdir
- Clean up __pycache__ in 'make clean'
- clear the __pycache__ during 'make clean'
- Copy the qrc locale file to a temp location and remove it when finished
(rcc expects everything to be in the same path)
a886dbf Use std::atomic for fRequestShutdown and fReopenDebugLog (Pieter Wuille)
16cf85f Revert "Include signal.h for sig_atomic_t in WIN32" (Pieter Wuille)
This reduces the rate of not founds by better matching the far
end expectations, it also improves privacy by removing the
ability to use getdata to probe for a node having a txn before
it has been relayed.
Previously the benchmark code used an integer division (%) with
a non-constant in the inner-loop. This is quite slow on many
processors, especially ones like ARM that lack a hardware divide.
Even on fairly recent x86_64 like haswell an integer division can
take something like 100 cycles-- making it comparable to the
runtime of siphash.
This change avoids the division by using bitmasking instead. This
was especially easy since the count was only increased by doubling.
This change also restarts the timing when the execution time was
very low this avoids mintimes of zero in cases where one execution
ends up below the timer resolution. It also reduces the impact of
the overhead on the final result.
The formatting of the prints is changed to not use scientific
notation make it more machine readable (in particular, gnuplot
croaks on the non-fixedpoint, and it doesn't sort correctly).
This also hoists out all the floating point divisions out of the
semi-hot path because it was easy to do so.
It might be prudent to break out the critical test into a macro
just to guarantee that it gets inlined. It might also make sense
to just save out the intermediate counts and times and get the
floating point completely out of the timing loop (because e.g.
on hardware without a fast hardware FPU like some ARM it will
still be slow enough to distort the results). I haven't done
either of these in this commit.
Fixing formatting
Adding test case into automatically generated test case set
Clean up commits
removing extra whitespace from eol
Removing extra whitespace on macro line
Previously these functions would infinitely loop if sync failed;
now they have a default timeout of 60 seconds, after which an
AssertionError is raised.
sync_blocks() has also been improved and now compares the tip
hash of each node, rather than just using block count.
If a node is offline failed outbound connection attempts will crank up
the addrman counter and effectively blow away our state.
This change reduces the problem by only counting attempts made while
the node believes it has outbound connections to at least two
netgroups.
Connect and addnode connections are also not counted, as there is no
reason to unequally penalize them for their more frequent
connections -- though there should be no real effect from this
unless their addnode configureation is later removed.
Wasteful repeated connection attempts while only a few connections are
up are avoided via nLastTry.
This is still somewhat incomplete protection because our outbound
peers could be down but not timed out or might all be on 'local'
networks (although the requirement for multiple netgroups helps).
The ability to GETDATA a transaction which has not (yet) been relayed
is a privacy loss vector.
The use of the mempool for this was added as part of the mempool p2p
message and is only needed to fetch transactions returned by it.
Any attacker who managed to make an evil commit that changed something in the
contrib/verify-commits/ directory could just as easily remove the warning
and/or modify it to not display the evil commits; telling the user to check
those commits specifically misleads them into checking just those commits
rather than the script itself.
Now that caches are distinct (https://github.com/travis-ci/travis-ci/issues/4393),
we can use the Travis minimal image.
The minimal image should take less time to setup and lead to quicker builds.
Also addressed while I'm in here:
- No need to delete the broken google-chrome repo in the minimal image
- Set the hostname to work-around an openjdk bug
- Remove the non-functional apt-cache option
- Remove useless message at completion
- Install jre where the java tests are run
2a8b358 Fix typo adddrman to addrman as requested in #8070 (Ethan Heilman)
f4119c6 Remove non-determinism which is breaking net_tests #8069 (EthanHeilman)
bf9266e Use Socks5ErrorString() to decode error responses from socks proxy. (Warren Togami)
94fd1d8 Make Socks5() InterruptibleRecv() timeout/failures informative. (Warren Togami)
0d9af79 SOCKS5 connecting and connected messages with -debug=net. (Warren Togami)
00678bd Make failures to connect via Socks5() more informative and less unnecessarily scary. (Warren Togami)
b4d24e1 Report reindexing progress in GUI (Pieter Wuille)
d3d7547 Add -reindex-chainstate that does not rebuild block index (Pieter Wuille)
fb8fad1 Optimize ActivateBestChain for long chains (Pieter Wuille)
316623f Switch reindexing to AcceptBlock in-loop and ActivateBestChain afterwards (Pieter Wuille)
d253ec4 Make ProcessNewBlock dbp const and update comment (Pieter Wuille)
6075bc4 doc: 32 and 64 bit packages are seperate (Wladimir J. van der Laan)
e5764e6 doc: Remove outdated qt4 install information from README.md (Wladimir J. van der Laan)
5d5e7a0 net: No need to export ConnectNode (Cory Fields)
e9ed620 net: No need to export DumpBanlist (Cory Fields)
8b8f877 net: make Ban/Unban/ClearBan functionality consistent (Cory Fields)
cca221f net: Drop CNodeRef for AttemptToEvictConnection (Cory Fields)
563f375 net: use the exposed GetNodeSignals() rather than g_signals directly (Cory Fields)
9faa490 net: remove unused set (Cory Fields)
52cbce2 net: don't import std namespace (Cory Fields)
a68ec21 Use SipHash-2-4 for address relay selection (Pieter Wuille)
8cc9cfe Switch CTxMempool::mapTx to use a hash index for txids (Pieter Wuille)
382c871 Use SipHash-2-4 for CCoinsCache index (Pieter Wuille)
0b1295b Add SipHash-2-4 primitives to hash (Pieter Wuille)
1475ecf Fix de-serialization bug where AddrMan is corrupted after exception * CAddrDB modified so that when de-serialization code throws an exception Addrman is reset to a clean state * CAddrDB modified to make unit tests possible * Regression test created to ensure bug is fixed * StartNode modifed to clear adrman if CAddrDB::Read returns an error code. (EthanHeilman)
fa83a5d [qa] wallet: Temporarily disable salvagewallet test (MarcoFalke)
fadd048 [doc] Link to clang-format in the developer notes (MarcoFalke)
fa72f7d [doc] Remove outdated line from listunspent RPC help, fix typo (MarcoFalke)
ac40ed7 Increase timeout waiting for pruned blk00000.dat (error10)
The current logic for syncing headers may lead to lots of duplicate
getheaders requests being sent: If a new block arrives while the node
is in headers sync, it will send getheaders in response to the block
announcement. When the headers arrive, the message will be of maximum
size and so a follow-up request will be sent---all of that in addition
to the existing headers syncing. This will create a second "chain" of
getheaders requests. If more blocks arrive, this may even lead to
arbitrarily many parallel chains of redundant requests.
This patch changes the behaviour to only request more headers after a
maximum-sized message when it contained at least one unknown header.
This avoids sustaining parallel chains of redundant requests.
Note that this patch avoids the issues raised in the discussion of
https://github.com/bitcoin/bitcoin/pull/6821: There is no risk of the
node being permanently blocked. At the latest when a new block arrives
this will trigger a new getheaders request and restart syncing.
Verify that results correct (match known values), consistent (encrypt->decrypt
matches the original), and compatible with the previous openssl implementation.
Also check that failed encrypts/decrypts fail the exact same way as openssl.
Wallet must come before crypto, otherwise linking fails on some platforms.
Includes a tangentially-related general cleanup rather than making the Makefile
sloppier.
The output should always match openssl's, even for failed operations. Even for
a decrypt with broken padding, the output is always deterministic (and attemtps
to be constant-time).
My changes leave all tray icon and menu creation/initialization logic
untouched. It only shows or hides the icon according to the setting.
A new checkbox was added to the OptionsDialog under the Window tab. A
bool option named "hideTrayIcon" was added to OptionsModel. This
checkbox was mapped like other all options to the OptionsModel.
A signal was added to the OptionsModel for broadcasting changes the the
hideTrayIcon option. This signal was connected to a new slot added to
BitcoinGUI named setTrayIconVisible(bool). The slot simply hides or
shows the trayIcon in BitcoinGUI according to the parameter recieved.
Changing NOP3 op name to OP_CHECKSEQUENCEVERIFY, renaming instances of OP_NOP3 in script_tests.json to CHECKSEQUENCEVERIFY
Cleaning up NOP3 comment
Re-adding test cases that were accidentally deleted, removing dupicated test case, fixing formatting
Removing re-labeling of OP_NOP3 to OP_CSV
Fixing whitespace issues
- Ban/Unban/ClearBan call uiInterface.BannedListChanged() as necessary
- Ban/Unban/ClearBan sync to disk if the operation is user-invoked
- Mark node for disconnection automatically when banning
- Lock cs_vNodes while setting disconnected
- Don't spin in a tight loop while setting disconnected
In my ever-growing list of test failures, I was seeing this one intermittently.
```
Running 2nd level testscript pruning.py...
Initializing test directory /tmp/testY5ypCv
Warning! This test requires 4GB of disk space and takes over 30 mins (up to 2 hours)
Mining a big blockchain of 995 blocks
Check that we haven't started pruning yet because we're below PruneAfterHeight
Success
Though we're already using more than 550MB, current usage: 587
Mining 25 more blocks should cause the first block file to be pruned
Assertion failed: blk00000.dat not pruned when it should be
File "/home/error/bitcoinxt-0.11D/qa/rpc-tests/test_framework/test_framework.py", line 118, in main
self.run_test()
File "/home/error/bitcoinxt-0.11D/qa/rpc-tests/pruning.py", line 272, in run_test
self.test_height_min()
File "/home/error/bitcoinxt-0.11D/qa/rpc-tests/pruning.py", line 94, in test_height_min
raise AssertionError("blk00000.dat not pruned when it should be")
Stopping nodes
Failed
```
After digging into the test, I found that the code is waiting 10 seconds for blk00000.dat to be deleted, and then throwing this failure if it still exists after 10 seconds.
I increased this amount, had the script print the actual time taken, and ran the test a few more times. The time taken ranged between 8 to 12 seconds. So, I feel that this timeout is too short.
After changing the timeout to 30 seconds, the test passes consistently.
(cherry picked from commit 3469911c89a48dd2fefe4d1c2a0c176256e14ee0)
Move the version reporting to Wallet::Verify, before starting
verification of the wallet.
This removes the dependency of init on a specific wallet database
library.
A further, trivial step towards resolving #7965.
166e4b0 Notify other serviceQueue thread we are finished to prevent deadlocks. (Pavel Janík)
db18ab2 Reenable multithread scheduler test. (Pavel Janík)
I made a subclass of QMessageBox that disables the send button in
exec() and starts a timer that calls a slot to re-enable it after a
configurable delay.
It also has a countdown in the send/yes button while it is disabled
to hint to the user why the send button is disabled (and that it is
actually supposed to be disabled).
* The "ERROR" was printed far too often during normal operation for what was not an error.
* Makes the Socks5() connect failure similar to the IP connect failure in debug.log.
Before:
`2016-05-09 00:15:00 ERROR: Proxy error: host unreachable`
After:
`2016-05-09 00:15:00 Socks5() connect to t6xj6wilh4ytvcs7.onion:18333 failed: host unreachable"`
It looks like travis is using the `travis.yml` from the branch, but runs
the test script from the branch merged into master. This causes
pull requests created before the QA tests python 3 transition to fail.
This temporarily reverts fa05e22e91
(#7851). It can be restored when this is no longer an issue.
The example local paths for "Building fully offline" have an extraneous ".git". This caused an error when trying to run gbuild, like this
fatal: '/home/user/bitcoin.git' does not appear to be a git repository
fatal: Could not read from remote repository.
This commit fixes that.
Locking for each operation here is unnecessary, and solves the wrong problem.
Additionally, it introduces a problem when cs_vNodes is held in an owning
class, to which invididual CNodeRefs won't have access.
These should be weak pointers anyway, once vNodes contain shared pointers.
Rather than using a refcounting class, use a 3-step process instead.
1. Lock vNodes long enough to snapshot the fields necessary for comparing
2. Unlock and do the comparison
3. Re-lock and mark the resulting node for disconnection if it still exists
d1d7775 Improve worst-case behavior of CScript::FindAndDelete (Patrick Strateman)
e2a30bc Unit test for CScript::FindAndDelete (Gavin Andresen)
c0f660c Replace c-style cast with c++ style static_cast. (Patrick Strateman)
ec9ad5f Replace memcmp with std::equal in CScript::FindAndDelete (Patrick Strateman)
b559914 Move bloom and feerate filtering to just prior to tx sending. (Gregory Maxwell)
4578215 Return mempool queries in dependency order (Pieter Wuille)
ed70683 Handle mempool requests in send loop, subject to trickle (Pieter Wuille)
dc13dcd Split up and optimize transaction and block inv queues (Pieter Wuille)
f2d3ba7 Eliminate TX trickle bypass, sort TX invs for privacy and priority. (Gregory Maxwell)
f0188f9 http: use std::move to move HTTPRequest into HTTPWorkItem (Wladimir J. van der Laan)
37b2137 http: Change boost::scoped_ptr to std::unique_ptr in HTTPRequest (Wladimir J. van der Laan)
f97b410 http: Add log message when work queue is full (Wladimir J. van der Laan)
091d6e0 http: Do a pending c++11 simplification (Wladimir J. van der Laan)
Use std::unique_ptr for handling work items.
This makes the code more RAII and, as mentioned in the comment, is what
I planned when I wrote the code in the first place.
08d7b56 util: switch LogPrint and error to variadic templates (Wladimir J. van der Laan)
9eaa0af tinyformat: force USE_VARIADIC_TEMPLATES (Wladimir J. van der Laan)
* CAddrDB modified so that when de-serialization code throws an exception Addrman is reset to a clean state
* CAddrDB modified to make unit tests possible
* Regression test created to ensure bug is fixed
* StartNode modifed to clear adrman if CAddrDB::Read returns an error code.
Some developers clearly don't get this and have been posting
"improvements" that create clear vulnerabilities. It should
have been better explained in the code, since the design
is somewhat subtle and getting it right is important.
This patch changes the implementation from one that stores 16 2-bit integers
in one uint32_t's, to one that stores the first bit of 64 2-bit integers in
one uint64_t and the second bit in another. This allows for 450x faster
refreshing and 2.2x faster average speed.
Change the few occurrences of the deprecated `auto_ptr` to c++11 `unique_ptr`.
Silences the deprecation warnings.
Also add a missing `std::` for consistency.
Bitwise logic combined with `<` with undefined signedness will
potentially results in undefined behavior. Fix this by defining the type
as a c++11 typed enum.
Fixes#6017.
f135e3c qt: Add transaction hash to details window title (Wladimir J. van der Laan)
17a6a21 qt: Make it possible to show details for multiple transactions (Wladimir J. van der Laan)
7df9224 doc: Add note about new build/test requirements to release notes (Wladimir J. van der Laan)
2aacc72 build: update ax_cxx_compile_stdcxx to serial 4 (Wladimir J. van der Laan)
a398549 depends: use c++11 (Cory Fields)
67969af build: Enable C++11 build, require C++11 compiler (Wladimir J. van der Laan)
DumpBanList currently does this:
- with lock: take a copy of the banmap
- perform I/O (write out the banmap)
- with lock: mark the banmap non-dirty
If a new ban is added during the I/O operation, it may never be persisted to
disk.
Reorder operations so that the data to be persisted cannot be older than the
time at which the banmap was marked non-dirty.
I made a silly mistake in a database wrapper where keys
were sorted by char instead of uint8_t. As x86 char is signed
the sorting for the block index database was messed up, resulting
in a segfault due to missing records.
Add a test to catch:
- Wrong sorting
- Seeking errors
- Iteration result not complete
Disabling warnings can be tricky, because doing so can cause a different
compiler to create new warnings about unsupported disable flags. Also, some
warnings don't surface until they're paired with another warning (gcc). For
example, adding "-Wno-foo" won't cause any trouble, but if there's a legitimate
warning emitted, the "unknown option -Wno-foo" will show up as well.
Work around this in 2 ways:
1. When checking to see if -Wno-foo is supported, check for "-Wfoo" instead.
2. Enable -Werror while checking 1.
If "-Werror -Wfoo" compiles, "-Wno-foo" is almost guaranteed to be supported.
-Werror itself is also checked. If that fails to compile by itself, it likely
means that the user added a flag that adds a warning. In that case, -Werror
won't be used while checking, and the build may be extra noisy. The user would
need to fix the bad input flag.
Also, silence 2 more additional warnings that can show up post-c++11.
This was doing more harm than good. The original intention was to speed up
builds, since a PR's ccache results will be thrown away anyway.
However, each PR maintains its own cache, so disabling writes means that
subsequent pushes don't benefit from the fresh cache. This is significant when
(for example) many headers are touched in a PR, then the PR is updated. With
this change, the updated PR will take advantage of the cache generated during
the PR's previous build.
ActivateBestChain uses chainActive after releasing the lock; reorder operations
to move all access to synchronized object into existing LOCK(cs_main) block.
A small GUI annoyance for me has always been that it's impossible to
have multiple transaction detail windows open, for example to compare
transactions.
This patch makes the window non-modal so that it is possible to open
transaction details at will.
f154470 [contrib] Remove reference to sf and add doc to verify.sh (MarcoFalke)
182bec4 contrib: remove hardcoded version from verify.sh (Wladimir J. van der Laan)
c907f4d doc: Update release process (Wladimir J. van der Laan)
869cf12 dbwrapper: Move `HandleError` to `dbwrapper_private` (Wladimir J. van der Laan)
b69836d dbwrapper: Pass parent CDBWrapper into CDBBatch and CDBIterator (Wladimir J. van der Laan)
878bf48 dbwrapper: Remove CDBWrapper::GetObfuscateKeyHex (Wladimir J. van der Laan)
74f7b12 dbwrapper: Remove throw keywords in function signatures (Wladimir J. van der Laan)
Pass parent wrapper directly instead of obfuscation key. This
makes it possible for other databases which re-use this code
to use other properties from the database.
Add a namespace dbwrapper_private for private functions to be used
only in dbwrapper.h/cpp and dbwrapper_tests.
Using throw() specifications in function signatures is not only
not required in C++, it is considered deprecated for
[various reasons](https://stackoverflow.com/questions/1055387/throw-keyword-in-functions-signature).
It is not implemented by any of the common C++ compilers. The usage is
also inconsistent with the rest of the source code.
Without this patch:
- When I compile the GUI from the bitcoin directory itself, it works as
expected.
- When I build the GUI in an out-of-tree build, I cannot get it to
select tabs. When I click, say the "Receive" tab nothing happens,
the button selects but it doesn't switch the page. The rest - even
the debug window - seems to work.
See full discussion here:
https://github.com/bitcoin/bitcoin/pull/7911#issuecomment-212413442
This turned out to be caused by a mismatch in the arguments to moc,
preventing it from finding `bitcoin-config.h`. Fix this by passing
`$(DEFAULT_INCLUDES)` to it, which gets set to the appropriate
path by autoconf itself.
SetString seems to be passing the length of the wrong variable to
memory_cleanse, resulting in the last byte of the temporary buffer not being
securely erased.
This will avoid sending more pointless INVs around updates, and
prevents using filter updates to timetag transactions.
Also adds locking for fRelayTxes.
By eliminating queued entries from the mempool response and responding only at
trickle time, this makes the mempool no longer leak transaction arrival order
information (as the mempool itself is also sorted)-- at least no more than
relay itself leaks it.
Previously we would assert that if every block in vBlockHashesToAnnounce is in
chainActive, then the blocks to be announced must connect. However, there are
edge cases where this assumption could be violated (eg using invalidateblock /
reconsiderblock), so just check for this case and revert to inv-announcement
instead.
Rather than allowing CNetAddr/CService/CSubNet to launch DNS queries, require
that addresses are already resolved.
This greatly simplifies async resolve logic, and makes it harder to
accidentally leak DNS queries.
Note: Some seeds aren't actually returning an IP for their name entries, so
they're being added to addrman with a source of [::].
This commit shouldn't change that behavior, for better or worse.
Previously Bitcoin would send 1/4 of transactions out to all peers
instantly. This causes high overhead because it makes >80% of
INVs size 1. Doing so harms privacy, because it limits the
amount of source obscurity a transaction can receive.
These randomized broadcasts also disobeyed transaction dependencies
and required use of the orphan pool. Because the orphan pool is
so small this leads to poor propagation for dependent transactions.
When the bypass wasn't in effect, transactions were sent in the
order they were received. This avoided creating orphans but
undermines privacy fairly significantly.
This commit:
Eliminates the bypass. The bypass is replaced by halving the
average delay for outbound peers.
Sorts candidate transactions for INV by their topological
depth then by their feerate (then hash); removing the
information leakage and providing priority service to
higher fee transactions.
Limits the amount of transactions sent in a single INV to
7tx/sec (and twice that for outbound); this limits the
harm of low fee transaction floods, gives faster relay
service to higher fee transactions. The 7 sounds lower
than it really is because received advertisements need
not be sent, and because the aggregate rate is multipled
by the number of peers.
leveldb's buildsystem causes us a few problems:
- breaks out-of-tree builds
- forces flags used for some tools
- limits cross builds
Rather than continuing to add wrappers around it, simply integrate it into our
build.
5d217de Add test to check spendable and unspendable UTXO on RPC listunspent (Joao Fonseca)
fa942c7 Move method to check matches within arrays on util.py (Joao Fonseca)
b30fb42 test: Rename wallet.dat to wallet_test.dat (Wladimir J. van der Laan)
a25a4f5 wallet_ismine.h → script/ismine.h (Wladimir J. van der Laan)
f4eae2d test: Create test fixture for wallet (Wladimir J. van der Laan)
de39c95 test: move accounting_tests and rpc_wallet_tests to wallet/test (Wladimir J. van der Laan)
fae1f4e [qa] rpc-tests: Fix link in comment and label error msg (MarcoFalke)
faa4f22 [qa] pull-tester: Exit early when no tests are run (MarcoFalke)
fa05e22 [qa] pull-tester: Don't mute zmq ImportError (MarcoFalke)
28b400f doc: update release-notes for `gettxoutsetinfo` change (Wladimir J. van der Laan)
76212bb rpc: make sure `gettxoutsetinfo` hash has txids (Wladimir J. van der Laan)
9ad1a51 crypto: bytes counts are 64 bit (Wladimir J. van der Laan)
a7af72a prevector::swap: fix (unreached) data corruption (Kaz Wesley)
4ed41a2 test prevector::swap (Kaz Wesley)
1e2c29f prevector: destroy elements only via erase() (Kaz Wesley)
Remove the mistaken assumption that GetKey returning false signifies
an internal database issue. It will return false when the key cannot
be deserialized into the (char,uint256) stanza, which indicates
that the cursor has reached a different kind of key.
Fixes bug #7890 introduced in #7756.
Without the newline I see "bein" where the two lines are concatenated:
Note that all inputs selected must be of standard form and P2SH scripts must *bein* the wallet using importaddress or addmultisigaddress (to calculate fees).
swap was using an incorrect condition to determine when to apply an optimization
(not swapping the full direct[] when swapping two indirect prevectors).
Rather than correct the optimization I'm removing it for simplicity. Removing
this optimization minutely improves performance in the typical (currently only)
usage of member swap(), which is swapping with a freshly value-initialized
object.
Fixes a bug in which pop_back did not call the deleted item's destructor.
Using the most general erase() implementation to implement all the others
prevents similar bugs because the coupling between deallocation and destructor
invocation only needs to be maintained in one place.
Also reduces duplication of complex memmove logic.
The key (transaction id for the following outputs) should be serialized
to the HashWriter.
This is a problem as it means different transactions in the same
position with the same outputs will potentially result in the same hash.
Fixes primary concern of #7758.
Break the circular dependency between main and txdb by:
- Moving `CBlockFileInfo` from `main.h` to `chain.h`. I think this makes
sense, as the other block-file stuff is there too.
- Moving `CDiskTxPos` from `main.h` to `txdb.h`. This type seems
specific to txdb.
- Pass a functor `insertBlockIndex` to `LoadBlockIndexGuts`. This leaves
it up to the caller how to insert block indices.
Byte counts for SHA256, SHA512, SHA1 and RIPEMD160 must be 64 bits.
`size_t` has a different size per platform, causing divergent results
when hashing more than 4GB of data.
0528e30 Remove wxwidgets references from NSIS script. (JeremyRand)
26880c3 build: Use PACKAGE_TARNAME and new bin names in NSIS script. (JeremyRand)
0dbf6e4 build: define base filenames for use elsewhere in the buildsystem (Cory Fields)
Add a method Cursor() to CCoinsView that returns a cursor which can be
used to iterate over the whole UTXO set.
- rpc: Change gettxoutsetinfo to use new Cursor method
- txdb: Remove GetStats method - Now that GetStats is implemented in
terms of Cursor, remove it.
dde46d3 Merge script_valid and script_invalid tests (Pieter Wuille)
009b503 Get rid of expect in script_tests as it's implied by scripterror (Pieter Wuille)
76da761 Make script_error a mandatory 4th field for script_tests (Pieter Wuille)
269281b Fix some misconstructed tests (Pieter Wuille)
d03e466 Fix formatting of NOPs for generated script tests (Pieter Wuille)
c7c6641 Fix JSON pretty printing in script_tests (Pieter Wuille)
d12760b rpc-tests: handle KeyError nicely in test_framework.py (Rusty Russell)
85c807c getblockchaininfo: make bip9_softforks an object, not an array. (Rusty Russell)
We can't change "softforks", but it seems far more logical to use tags
in an object rather than using an "id" field in an array.
For example, to get the csv status before, you need to iterate the
array to find the entry with 'id' field equal to "csv":
jq '.bip9_softforks | map(select(.id == "csv"))[] | .status'
Now:
jq '.bip9_softforks.csv.status'
There is no issue with fork names being incompatible with JSON tags,
since we're selecting them ourselves.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we used the CInv that would be sent to the peer announcing the
transaction as the key, but using the txid instead allows us to decouple the
p2p layer from the application logic (which relies on this map to avoid
duplicate tx requests).
The NSIS script tried to delete wxwidgets-based executables/locales. These files are ancient, and presumably no users have them anymore, so we can simplify the NSIS script by removing those lines.
Replaces the hardcoded string "bitcoin" with the autoconf variable PACKAGE_TARNAME; fixes#7265.
Places where I chose not to replace:
1. bitcoin.ico wasn't replaced because it doesn't seem to be relevant to the build system and its filename never affects the end user.
2. InstallDir wasn't replaced because the current text has an uppercase B, and I'm not sure of a good way to capitalize the result of PACKAGE_TARNAME.
3. A comment in the Main Installer section wasn't replaced because comments don't ever face the end user.
4. The registry value "URL:Bitcoin" wasn't replaced for the same reason as InstallDir.
5. Startup shortcut wasn't replaced for the same reason as InstallDir.
All other appearances of "bitcoin" were replaced with PACKAGE_TARNAME, except for the bin names, which were instead replaced with the new bin name autoconf variables.
Unfortunately, the target namees defined at the Makefile.am level can't be used
for *.in substitution. So these new defines will have to stay synced up with
those targets.
Using the new variables for the deploy targets in the main Makefile.am will
ensure that they stay in sync, otherwise build tests will fail.
The lockorder potential deadlock detection works by remembering for each
lock A that is acquired while holding another B the pair (A,B), and
triggering a warning when (B,A) already exists in the table.
A and B in the above text are represented by pointers to the CCriticalSection
object that is acquired. This does mean however that we need to clean up the
table entries that refer to any critical section which is destroyed, as it
memory address can potentially be used for another unrelated lock in the future.
Implement this clean up by remembering not only the pairs in forward direction,
but also backward direction. This allows for fast iteration over all pairs that
use a deleted CCriticalSection in either the first or the second position.
The current tests for varint only check that
serialization-deserialization is a roundtrip. That is a useful test, but
it is also good to check for some exact bit patterns, to prevent a code
change that changes the serialization format from going undetected.
As the varint functions are templated, also check with different types.
da5fdbb Test relay of version 2 transactions (Suhas Daftuar)
5cb1d8a Tests: move get_bip9_status to util.py (Suhas Daftuar)
e4ba9f6 Version 2 transactions remain non-standard until CSV activates (Suhas Daftuar)
Check the Content-Type header that is returned from the RPC server. Only
if it is `application/json` the data is supposed to be parsed as JSON.
This gives better reporting if the HTTP server happens to return an error that is
not JSON-formatted, which is the case if it happens at a lower level
before JSON-RPC kicks in.
Before: `Unexpected exception caught during testing: No JSON object could be decoded`
After: `JSONRPC error: non-JSON HTTP response with '403 Forbidden' from server`
Currently, we're keeping a timeout for each requested block, starting
from when it is requested, with a correction factor for the number of
blocks in the queue.
That's unnecessarily complicated and inaccurate.
As peers process block requests in order, we can make the timeout for each
block start counting only when all previous ones have been received, and
have a correction based on the number of peers, rather than the total number
of blocks.
Two-line patch to make it possible to shut down bitcoind cleanly during
the initial ActivateBestChain.
Fixes#6459 (among other complaints).
To reproduce:
- shutdown bitcoind
- copy chainstate
- start bitcoind
- let the chain sync a bit
- shutdown bitcoind
- copy back old chainstate
- start bitcoind
- bitcoind will catch up with all blocks during Init()
(the `boost::this_thread::interruption_point` / `ShutdownRequested()`
dance is ugly, this should be refactored all over bitcoind at some point
when moving from boost::threads to c++11 threads, but it works...)
They claimed to be testing P2SH scripts with non-push scriptSigs, but
1) they were not enabling P2SH
2) they have push-only scriptSigs
Fix this, and add a few more related cases.
These add very simple sanity checks to ensure that the build/host toolchains
have not changed since the last run. If they have, all ids will change and
packages will be rebuilt.
For more complicated usage (like parsing dpkg), HOST_ID_SALT/BUILD_ID_SALT may
be used to introduce arbitrary data to the ids.
This removes the following executables from the binary gitian release:
- test_bitcoin-qt[.exe]
- bench_bitcoin[.exe]
@jonasschnelli and me discussed this on IRC a few days ago - unlike the
normal `bitcoin_tests` which is useful to see if it is safe to run
bitcoin on a certain OS/environment combination, there is no good reason
to include these. Better to leave them out to reduce the download
size.
Sizes from the 0.12 release:
```
2.4M bitcoin-0.12.0/bin/bench_bitcoin.exe
22M bitcoin-0.12.0/bin/test_bitcoin-qt.exe
```
As we are already using the API to retrieve the pull request
title, also retrieve the base branch.
This makes sure that pull requests for 0.12 automatically end up in
0.12, and pull requests for master automatically end up in master,
and so on.
It is still possible to override the branch from the command line
or using the `githubmerge.branch` git option.
Split out methods to every module, apart from 'help' and 'stop' which
are implemented in rpcserver.cpp itself.
- This makes it easier to add or remove RPC commands - no longer everything that includes
rpcserver.h has to be rebuilt when there's a change there.
- Cleans up `rpc/server.h` by getting rid of the huge cluttered list of function definitions.
- Removes most of the bitcoin-specific code from rpcserver.cpp and .h.
Continues #7307 for the non-wallet.
Ubuntu 16.04 "xenial xerus" does not come with Python 2.x by default.
It is possible to install a python-2.7 package, but this has its own
problem: no `python` or `python2` symlink (see #7717).
This fixes the following scripts to work with python 3:
- `make check` (bctest,py, bitcoin-util-test.py)
- `make translate` (extract_strings_qt.py)
- `make symbols-check` (symbol-check.py)
- `make security-check` (security-check.py)
Explicitly call the python commands using $(PYTHON) instead
of relying on the interpreter line at the top of the scripts.
e7e48ba test_framework: Py3.4 compat: Specify timeout parameter by name (Luke Dashjr)
d7b80b5 test_framework: Avoid infinite loop in encoding Decimal (Wladimir J. van der Laan)
Avoid an infinite loop in encoding, by ensuring EncodeDecimal
returns a string. round(Decimal) used to convert it to
float, but it no longer does in python 3.x. Strings are
supported since #6380, so just use that.
Replace the `bitcoin-cli -rpcwait` after spawning bitcoind
with our own loop that detects when bitcoind exits prematurely.
And if one node fails to start, stop the others.
This prevents a hang in such a case (see #7463).
This makes github-merge.py the first developer tool to go
all Python 3 (for context see #7717).
The changes are straightforward as the script already was
`from __future__ import division,print_function,unicode_literals`.
However urllib2 changed name, and json will only accept unicode data not
bytes.
This retains py2 compatibility for now: not strictly necessary
as it's not used by the build system - but it was easy.
The build date does only makes sense for custom/self-compiled bitcoin-core versions because we are using static build-dates for our deterministic release builds.
Having a quick option to get the current datadir is much more valuable for debug purposes.
The "feefilter" p2p message is used to inform other nodes of your mempool min fee which is the feerate that any new transaction must meet to be accepted to your mempool. This will allow them to filter invs to you according to this feerate.
Adds two RPC tests for the generatetoaddress RPC, one in the wallet, and one when the wallet is disabled.
The wallet RPC Test mines Bitcoin to another node's address and checks that that node has received the Bitcoin.
The RPC test without the wallet mines Bitcoin to an arbitrary address and checks that it works. It then mines to an arbitrary invalid address and checks that that fails.
Creates the generatetoaddress rpc which is virtually identical to the generate rpc except that it takes an argument for the address to mine to. It does not rely on wallet functionality.
The mining code shared by generate and generatetoaddress has been moved to another method to reduce duplication.
This RPC test will test both the activation mechanism of the first versionbits soft fork as well as testing many code branches of the consensus logic for BIP's 68, 112, and 113.
2016/01/24:
Change miniwget to return HTTP status code
Increments API_VERSION to 16
2016/01/22:
Improve UPNPIGD_IsConnected() to check if WAN address is not private.
Parse HTTP response status line in miniwget.c
fad8cfb [qa] mininode: Add and use CONSTs (MarcoFalke)
fa8cd46 [qa] Move create_tx() to util.py (MarcoFalke)
fad7dc8 [qa] wallet: speed up tests (MarcoFalke)
fa3a81a [tests] Extend util_ParseMoney test case (MarcoFalke)
This implements caching of ancestor state to each mempool entry, similar to
descendant tracking, but also including caching sigops-with-ancestors (as that
metric will be helpful to future code that implements better transaction
selection in CreatenewBlock).
The work limit served to prevent the descendant walking algorithm from doing
too much work by marking the parent transaction as dirty. However to implement
ancestor tracking, it's not possible to similarly mark those descendant
transactions as dirty without having to calculate them to begin with.
This commit removes the work limit altogether. With appropriate
chain limits (-limitdescendantcount) the concern about doing too much
work inside this function should be mitigated.
While trying to find a black/white version of the Bitcoin
logo for the organization I noticed the about.png is not
entirely black - it has some reflection. Remove this to make
it the same as other icons.
Also ran the icons through `contrib/devtools/optimize-pngs.py`,
so `chevron.png` was optimized too.
0ecb340 test: Script_error checking in script_invalid tests (Wladimir J. van der Laan)
2317ad7 test: Re-introduce JSON pretty printing in test builder (Wladimir J. van der Laan)
b0ff857 test: Move non-generated script_invalid test to the correct place (Wladimir J. van der Laan)
If ZMQ is enabled, check whether it's installed before running ZMQ tests.
If it isn't, disable ZMQ and print a warning.
Also add dependency info to test docs, so users know ZMQ is required
before running tests, and so they know how to install it.
When following the build instructions before this change then trying
to run the RPC tests, a unix user would get an error when python
tried to import zmq.
There may be other dependencies that should be added to the docs,
particularly ones for non-unix systems. This is the only unlisted
dependency I encountered using linux.
It looks like, TorController::disconnected_cb(TorControlConnection&
conn) gets called multiple times which results in multiple event_new().
Avoid this by creating the event only once in the constructore, and
deleting it only once in the destructor (thanks to Cory Fields for the
idea).
Replaces the fix by Jonas Schnelli in #7610, see discussion there.
Continues "Make logging for validation optional" from #6519.
The idea there was to remove all ERROR logging of rejected transaction,
and move it to one message in the class 'mempoolrej' which logs the
state message (and debug info). The superfluous ERRORs in the log
"terrify" users, see for example issue #5794.
Unfortunately a lot of new logging was introduced in #6871 (RBF) and
#7287 (misc refactoring). This pull updates that new code.
Fixed formatting as requested on https://github.com/bitcoin/bitcoin/pull/7589
Description:
Documentation was unclear in this section and could be interpreted to mean that boost was not a hard requirement for older Ubuntu versions.
Related: #7587
f22f14c doc: mention bitcoin-cli -stdin in release notes (Wladimir J. van der Laan)
92bcca3 rpc: Input-from-stdin mode for bitcoin-cli (Wladimir J. van der Laan)
Implements #7442 by adding an option `-stdin` which reads
additional arguments from stdin, one per line.
For example
```bash
echo -e "mysecretcode\n120" | src/bitcoin-cli -stdin walletpassphrase
echo -e "walletpassphrase\nmysecretcode\n120" | src/bitcoin-cli -stdin
```
BerkeleyDB dump files have key and value lines indented.
The salvage code passes these to ParseHex as-is.
Check this in the tests (should just pass with current code).
Check for EOF before every getline, and warn when reading gets to EOF
before the end of the data.
Stricter error checking could shed more light on issues such as #7463
and #7379.
149641e Travis: Use Blue Box VMs for IPv6 loopback support (Luke Dashjr)
c01f08d Bugfix: depends/Travis: Use --location (follow redirects) and --fail [on HTTP error response] with curl (Luke Dashjr)
5d1148c Travis: Use curl rather than wget for Mac SDK (Luke Dashjr)
1ecbb3b depends: Use curl for fetching on Linux (Luke Dashjr)
- Replace NOP3 with CHECKSEQUENCEVERIFY (BIP112)
<nSequence> CHECKSEQUENCEVERIFY -> <nSequence>
- Fails if txin.nSequence < nSequence, allowing funds of a txout to be locked for a number of blocks or a duration of time after its inclusion in a block.
- Pull most of CheckLockTime() out into VerifyLockTime(), a local function that will be reused for CheckSequence()
- Add bitwise AND operator to CScriptNum
- Enable CHECKSEQUENCEVERIFY as a standard script verify flag
- Transactions that fail CSV verification will be rejected from the mempool, making it easy to test the feature. However blocks containing "invalid" CSV-using transactions will still be accepted; this is *not* the soft-fork required to actually enable CSV for production use.
Check the returned script_error. Add expected script_error
for generated as well as custom tests.
The specific error is not part of consensus, however
it could avoid unclear reporting issues such as #6862 in the future.
Fixes#7513.
SequenceLocks functions are used to evaluate sequence lock times or heights per BIP 68.
The majority of this code is copied from maaku in #6312
Further credit: btcdrak, sipa, NicolasDorier
If number of conflict confirms cannot be determined, this means
that the block is still unknown or not yet part of the main chain,
for example during a reindex. Do nothing in that case,
instead of crash with an assertion.
Fixes#7234.
This test is no longer relevant.
It was introduced in 8c222dca4f to check
the switch to 1MB blocks after the BDB too-many-locks issue back in
2013. The switching code has been long since removed.
It also needs a specific data file that is hard to find. I've verified
in #6320 that it still passes, however I think there is zero reason to
keep it.
Closes#6320.
Currently Travis's wget fails fetching qrencode:
Fetching qrencode...
ERROR: no certificate subject alternative name matches
requested host name `fukuchi.org'.
To connect to fukuchi.org insecurely, use `--no-check-certificate'.
OpenSSL: error:14077438:SSL routines:SSL23_GET_SERVER_HELLO:tlsv1 alert internal error
Unable to establish SSL connection.
make: *** [/home/travis/build/luke-jr/bitcoin/depends/sources/download-stamps/.stamp_fetched-qrencode-qrencode-3.4.4.tar.bz2.hash] Error 4
A WWW-Authenticate header must be present in the 401
response to make clients know that they can authenticate,
and how.
WWW-Authenticate: Basic realm="jsonrpc"
Fixes#7462.
The old configure.ac did not work for a copyright holders string
containing commas due to insufficient quoting. The new one allows this.
While this is, of course, not of direct consequence to the current code
(where the string is "Bitcoin Core"), it should still be fixed now that
the string is actually factored out.
fad6244 ATMP: make nAbsurdFee const (MarcoFalke)
fa762d0 [wallet.h] Remove main.h include (MarcoFalke)
fa79db2 Move maxTxFee out of mempool (MarcoFalke)
027fdb8 When/if the copyright line does not mention Bitcoin Core developers, add a second line to copyrights in -version, About dialog, and splash screen (Luke Dashjr)
cc2095e Rewrite FormatParagraph to handle newlines within input strings correctly (Luke Dashjr)
cddffaf Bugfix: Include COPYRIGHT_HOLDERS_SUBSTITUTION in Makefile substitutions so it gets passed to extract-strings correctly (Luke Dashjr)
29598e4 Move PACKAGE_URL to configure.ac (Luke Dashjr)
78ec83d splashscreen: Resize text to fit exactly (Luke Dashjr)
3cae140 Bugfix: Actually use _COPYRIGHT_HOLDERS_SUBSTITUTION everywhere (Luke Dashjr)
4d5a3df Bugfix: gitian-descriptors: Add missing python-setuptools requirement for OS X (biplist module) (Luke Dashjr)
e4ab5e5 Bugfix: Correct copyright year in Mac DMG background image (Luke Dashjr)
917b1d0 Set copyright holders displayed in notices separately from the package name (Luke Dashjr)
c39a6ff Travis & gitian-osx: Use depends for ds_store and mac_alias modules (Luke Dashjr)
902ccde depends: Add mac_alias to depends (Luke Dashjr)
82a2d98 depends: Add ds_store to depends (Cory Fields)
de619a3 depends: Pass PYTHONPATH along to configure (Cory Fields)
e611b6e macdeploy: Use rsvg-convert rather than cairosvg (Luke Dashjr)
63bcdc5 More complicated package name substitution for Mac deployment (Luke Dashjr)
1a6c67c Parameterise 2009 in translatable copyright strings (Luke Dashjr)
d5f4683 Unify package name to as few places as possible without major changes (Luke Dashjr)
cf82d05 Build: Consensus: Make libbitcoinconsensus_la_SOURCES fully dynamic and dependend on both crypto and consensus packages (Jorge Timón)
4feadec Build: Libconsensus: Move libconsensus-ready files to the consensus package (Jorge Timón)
a3d5eec Build: Consensus: Move consensus files from common to its own module/package (Jorge Timón)
1e05727 Decide eviction group ties based on time. (Gregory Maxwell)
1e9613a Do not absolutely protect local peers from eviction. (Gregory Maxwell)
5d74309 Get rid of inaccurate ScriptSigArgsExpected (Pieter Wuille)
ProcessNewBlock would return failure early if CheckBlock failed, before
calling AcceptBlock. AcceptBlock also calls CheckBlock, and upon failure
would update mapBlockIndex to indicate that a block was failed. By returning
early in ProcessNewBlock, we were not marking blocks that fail a check in
CheckBlock as permanently failed, and thus would continue to re-request and
reprocess them.
This corrects a bug the case of tying group size where the code may
fail to select the group with the newest member. Since newest time
is the final selection criteria, failing to break ties on it
on the step before can undermine the final selection.
Tied netgroups are very common.
(cherry picked from commit 8e09f914f8)
With automatic tor HS support in place we should probably not be providing
absolute protection for local peers, since HS inbound could be used to
attack pretty easily. Instead, this counts on the latency metric inside
AttemptToEvictConnection to privilege actually local peers.
(cherry picked from commit 46dbcd4833)
Previously didn't make clear that the ContextualCheckBlock* functions
meant the block headers as context - not the UTXO set itself - and that
ConnectBlock() also did UTXO-related validity checks (in the future we
may split that functionality into a separate UTXO-specific contextual
check block function).
Also, reordered to put validity checks first for better readability.
Also renames whitelistalwaysrelay.
Nodes relay all transactions from whitelisted peers, this
gets in the way of some useful reasons for whitelisting
peers-- for example, bypassing bandwidth limitations.
The purpose of this forced relaying is for specialized gateway
applications where a node is being used as a P2P connection
filter and multiplexer, but where you don't want it getting
in the way of (re-)broadcast.
This change makes it configurable with whitelistforcerelay.
43abb02 [Qt] Add a new chevron/arrow icon for the console prompt line (Jonas Schnelli)
56c9e66 [Qt] keep scroll position in GUI console after changing font size (Jonas Schnelli)
3a3a927 [Qt] Add option to increase/decrease font size in the console window (Jonas Schnelli)
"permit" is currently used to configure transaction filtering, whereas replacement is more to do with the memory pool state than the transaction itself.
Adds several unittests for CAddrMan and CAddrInfo.
Increases the accuracy of addrman tests.
Removes non-determinism in tests by overriding the random number generator.
Extracts testing code from addrman class to test class.
Use 'utf-8' instead of the Python 2 default of 'ascii' to encode/decode
commit messages.
This can be removed when switching to Python 3, as 'utf-8' is the
default there.
Necessary for merging #7422 due to the ฿ in ฿tcDrak.
Instruct people to "git fetch" so that if this is their 2nd+ gitian build they will have a fresh bitcoin repo.
Instruct people to add all the known pgp keys to their keyring so that gverify will print more useful info.
Add a configuration option `-permitrbf` to set transaction replacement policy
for the mempool.
Enabling it will enable (opt-in) RBF, disabling it will refuse all
conflicting transactions.
e8600c9 banlist (bugfix): allow CNode::SweepBanned() to run on interval (Philip Kaufmann)
2977c24 banlist: add more banlist infos to log / add GUI signal (Philip Kaufmann)
ce479aa banlist: better handling of banlist in StartNode() (Philip Kaufmann)
57c77fe banlist: update set dirty to be more fine grained (Philip Kaufmann)
3b468a0 gitian: Need `ca-certificates` and `python` for LXC builds (Wladimir J. van der Laan)
99fda26 doc: Make networking work inside builder in gitian-building.md (Wladimir J. van der Laan)
This is meant to be a direct translation of the bash script,
with the difference that it retrieves the PR title from github,
thus creating pull messages like:
Merge #12345: Expose transaction temperature over RPC
Add "bip125-replaceable" output field to listtransactions and gettransaction
which indicates if an unconfirmed transaction, or any unconfirmed parent, is
signaling opt-in RBF according to BIP 125.
These are changes I needed to get gitian building to work with Debian
8.2, which is the version we tell to use.
- Set up NAT, so that container can access network beyond host
- Remove explicit cgroup setup - these are mounted automatically now
d11fc16 [Wallet] Call notification signal when a transaction is abandoned (Jonas Schnelli)
df0e222 Add RPC test for abandoned and conflicted transactions. (Alex Morcos)
01e06d1 Add new rpc call: abandontransaction (Alex Morcos)
9e69717 Make wallet descendant searching more efficient (Alex Morcos)
Unconfirmed transactions that are not in your mempool either due to eviction or other means may be unlikely to be mined. abandontransaction gives the wallet a way to no longer consider as spent the coins that are inputs to such a transaction. All dependent transactions in the wallet will also be marked as abandoned.
Due to include ordering, defining in one place was not enough to ensure correct
usage. Use global defines so that we don't have to worry abou this ordering.
Also add a comment in configure about the test.
8a7f000 [RPC] remove the option of having multiple timer interfaces (Jonas Schnelli)
db198d5 Fix RPCTimerInterface ordering issue Dispatching a QThread from a non Qt thread is not allowed. Always use the HTTPRPCTimerInterface (non QT) to dispatch RPCRunLater threads. (Jonas Schnelli)
fa33d97 [walletdb] Add missing LOCK() in Recover() for dummyWallet (MarcoFalke)
fa14d99 [qa] check if wallet or blochchain maintenance changes the balance (MarcoFalke)
fa0765d [qa] Cleanup wallet.py test (MarcoFalke)
3968922 c++11: fix libbdb build against libc++ in c++11 mode (Cory Fields)
57d2f62 c++11: CAccountingEntry must be defined before use in a list (Cory Fields)
89f71c6 c++11: don't throw from the reverselock destructor (Cory Fields)
76ac35f c++11: detect and correct for boost builds with an incompatible abi (Cory Fields)
If a new transaction will cause limitfreerelay
to be exceeded it should not be accepted
into the memory pool and the byte counter
should be updated only after the fact.
------------------------------------------------------------------------
r249567 | djasper | 2015-10-07 19:00:20 +0200 (Wed, 07 Oct 2015) | 2 lines
clang-format: Add include sorting capabilities to sublime, emacs and
clang-format-diff.py.
------------------------------------------------------------------------
r231926 | djasper | 2015-03-11 15:58:38 +0100 (Wed, 11 Mar 2015) | 3 lines
clang-format: Recognize the .ts (TypeScript) extension as JavaScript.
Patch by Martin Probst. Thank you.
------------------------------------------------------------------------
r223685 | djasper | 2014-12-08 20:39:03 +0100 (Mon, 08 Dec 2014) | 1 line
clang-format: Make clang-format-diff.py format java files.
------------------------------------------------------------------------
r221990 | djasper | 2014-11-14 14:27:28 +0100 (Fri, 14 Nov 2014) | 4 lines
clang-format: Give clang-format-diff.py a -v option.
With it, it prints the file being formatted. Apparently people are
formatting thousands of files and some progress indication is helpful.
------------------------------------------------------------------------
r216945 | ed | 2014-09-02 22:59:13 +0200 (Tue, 02 Sep 2014) | 6 lines
Use /usr/bin/env python instead of /usr/bin/python.
On operating systems like the BSDs, it is typically the case that
/usr/bin/python does not exist. We should therefore use /usr/bin/env
instead. This is also done in various other scripts in tools/.
------------------------------------------------------------------------
r208766 | djasper | 2014-05-14 11:36:11 +0200 (Wed, 14 May 2014) | 1 line
clang-format: Add clang-format-diff usage examples for SVN.
------------------------------------------------------------------------
r199750 | djasper | 2014-01-21 16:40:01 +0100 (Tue, 21 Jan 2014) | 3 lines
clang-format: Enable formatting for .proto and .protodevel files.
Support for protocol buffer files seems complete enough.
------------------------------------------------------------------------
r197668 | djasper | 2013-12-19 11:21:37 +0100 (Thu, 19 Dec 2013) | 1 line
Fix usage description of clang-format-diff.py.
------------------------------------------------------------------------
r197608 | alp | 2013-12-18 22:34:07 +0100 (Wed, 18 Dec 2013) | 7 lines
clang-format-diff.py: fix -regex/-iregex matching
While debating the finer points of file extension matching, we somehow missed
the bigger problem that the current code will match anything starting with the
default or user-specified pattern (e.g. lit.site.cfg.in).
Fix this by doing what find(1) does, implicitly wrapping the pattern with ^$.
------------------------------------------------------------------------
r197542 | alp | 2013-12-18 01:58:58 +0100 (Wed, 18 Dec 2013) | 3 lines
clang-format-diff.py: add the OpenCL file extension
It's handled correctly as a C-family language.
------------------------------------------------------------------------
r197378 | alexfh | 2013-12-16 11:57:30 +0100 (Mon, 16 Dec 2013) | 14 lines
Added -iregex for case-insensitive regex to filter file names.
Summary:
-regex and -iregex both mimic options of the find utility.
Made the default list of extensions case-insensitive, so that it's not only C
and CPP extensions are accepted in upper case.
Reviewers: djasper
Reviewed By: djasper
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2415
------------------------------------------------------------------------
r196917 | alp | 2013-12-10 14:51:53 +0100 (Tue, 10 Dec 2013) | 10 lines
clang-format-diff.py: Support -regex filter and more filename extensions
Add support for more filename extensions based on the list in the clang
plus JavaScript.
Also adds a -regex option so users can override defaults if they have unusual
file extensions or want to format everything in the diff.
Keeping with tradition the flag is modelled on Unix conventions, this time
matching the semantics of find(1).
------------------------------------------------------------------------
r196484 | alp | 2013-12-05 09:14:54 +0100 (Thu, 05 Dec 2013) | 4 lines
clang-format-diff.py: pass through errors to stderr, not stdout
Also use write() for unified diff output to avoid further processing by the
print function (e.g. trailing newline).
------------------------------------------------------------------------
r196336 | alp | 2013-12-04 01:48:22 +0100 (Wed, 04 Dec 2013) | 3 lines
clang-format-diff.py: Fix 'beintroduced' in help output
Also update docs to reflect recently changed -i inplace edit behaviour.
------------------------------------------------------------------------
r192505 | alexfh | 2013-10-11 23:32:01 +0200 (Fri, 11 Oct 2013) | 17 lines
Changed clang-format-diff.py to output diff by default. Added -i option to apply changes to files instead.
Summary:
"svn diff|clang-format-diff.py" will just output the diff.
Now it's possible to use:
svn diff|clang-format-diff.py|patch -p0
as an equivalent to:
svn diff|clang-format-diff.py -i
;)
Reviewers: djasper
Reviewed By: djasper
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1840
------------------------------------------------------------------------
r192184 | djasper | 2013-10-08 17:54:36 +0200 (Tue, 08 Oct 2013) | 7 lines
clang-format: Don't exit with failure on empty files.
Also let clang-format-diff.py detect errors based on clang-format's
return code. Otherwise messages like "Can't find usable .clang-format,
falling back to LLVM style" can make it fail, which might be undesired.
Patch by Alp Toker. Thank you!
------------------------------------------------------------------------
r191820 | djasper | 2013-10-02 15:59:03 +0200 (Wed, 02 Oct 2013) | 18 lines
clang-format: Fix clang-format-diff.py according to diff specification.
Patch by Alp Toker. Many thanks!
Original descriptions:
clang-format-diff incorrectly modifies unchanged lines due to an error
in diff parsing.
The unified diff format has a default line change count of 1, and 0 may
be specified to indicate that no lines have been added. This patch
updates the parser to accurately reflect the diff specification.
This also has the benefit of stabilising the operation so it will
produce the same output when run multiple times on the same changeset,
which was previously not the case.
No tests added because this script is not currently tested (though we
should look into that!)
------------------------------------------------------------------------
r191137 | djasper | 2013-09-21 12:05:02 +0200 (Sat, 21 Sep 2013) | 3 lines
Fix clang-format-diff.py to accept -style again.
Copy and paste error in r190935..
------------------------------------------------------------------------
r190935 | djasper | 2013-09-18 14:14:09 +0200 (Wed, 18 Sep 2013) | 3 lines
Simplify clang-format-diff.py using new clang-format options.
clang-format's -lines parameter makes this significantly easier.
------------------------------------------------------------------------
r189765 | alexfh | 2013-09-02 18:39:23 +0200 (Mon, 02 Sep 2013) | 2 lines
Added WebKit style to the BasedOnStyle handling and to the relevant help messages.
------------------------------------------------------------------------
r182923 | djasper | 2013-05-30 13:50:20 +0200 (Thu, 30 May 2013) | 4 lines
Fix default value of clang-format-diff's -p option.
This way, it has the same default as 'patch' and also the example in the
code makes more sense as it is explicitly setting -p 1.
------------------------------------------------------------------------
r179676 | djasper | 2013-04-17 09:55:02 +0200 (Wed, 17 Apr 2013) | 2 lines
Small improvements to clang-format documentation and integration
scripts.
------------------------------------------------------------------------
r179377 | djasper | 2013-04-12 15:42:36 +0200 (Fri, 12 Apr 2013) | 1 line
Fix clang-format-diff.py script.
------------------------------------------------------------------------
r179098 | djasper | 2013-04-09 17:23:04 +0200 (Tue, 09 Apr 2013) | 5 lines
Improvements to clang-format integrations.
This adds an emacs editor integration (thanks to Ami Fischman). Also
pulls out the style into a variable for the vi integration and just
uses clang-formats defaults style in clang-format-diff.py.
------------------------------------------------------------------------
r177506 | djasper | 2013-03-20 10:53:23 +0100 (Wed, 20 Mar 2013) | 1 line
Add clang-format binary to cfe.
------------------------------------------------------------------------
s
noexcept is default for destructors as of c++11. By throwing in reverselock's
destructor if it's lock has been tampered with, the likely result is
std::terminate being called. Indeed that happened before this change.
Once reverselock has taken another lock (its ctor didn't throw), it makes no
sense to try to grab or lock the parent lock. That is be broken/undefined
behavior depending on the parent lock's implementation, but it shouldn't cause
the reverselock to fail to re-lock when destroyed.
To avoid those problems, simply swap the parent lock's contents with a dummy
for the duration of the lock. That will ensure that any undefined behavior is
caught at the call-site rather than the reverse lock's destruction.
Barring a failed mutex unlock which would be indicative of a larger problem,
the destructor should now never throw.
This is ugly, but temporary. boost::filesystem will likely be dropped soon
after c++11 is enabled. Otherwise, we could simply roll our own copy_file. I've
fixed this at the buildsystem level for now in order to avoid mixing in
functional changes.
Explanation:
If boost (prior to 1.57) was built without c++11, it emulated scoped enums
using c++98 constructs. Unfortunately, this implementation detail leaked into
the abi. This was fixed in 1.57.
When building against that installed version using c++11, the headers pick up
on the native c++11 scoped enum support and enable it, however it will fail to
link. This can be worked around by disabling c++11 scoped enums if linking will
fail.
Add an autoconf test to determine incompatibility. At build-time, if native
enums are being used (a c++11 build), and force-disabling them causes a
successful link, we can be sure that there's an incompatibility and enable the
work-around.
Don't scan the wallet to see if the current key has been used if we're going to make a new key anyway.
Stop scanning the wallet as soon as we see that the current key has been used.
Don't call isValid() twice on the current key.
In rpc-tests.py, don't override BITCOIND and BITCOINCLI if they're
already set. Makes it possible to run the tests with either another tree
or the GUI.
After discussion in #7164 I think this is better.
Max tip age was introduced in #5987 to make it possible to run
testnet-in-a-box. But associating this behavior with the testnet chain
is wrong conceptually, as it is not needed in normal usage.
Should aim to make testnet test the software as-is.
Replace it with a (debug) option `-maxtipage`, which can be
specified only in the specific case.
d812daf fix logic for error log (accraze)
c611acc wallet: check if tx scriptPubKey is unspendable (accraze)
b6915b8 checks for null data transaction before debug.log (accraze)
CWalletTx::GetAmounts could not find output address for null data transactions, thus issuing an error in debug.log. This change checks to see if the transaction is OP_RETURN before issuing error.
resolves#6142
We used to have a trickle node, a node which was chosen in each iteration of
the send loop that was privileged and allowed to send out queued up non-time
critical messages. Since the removal of the fixed sleeps in the network code,
this resulted in fast and attackable treatment of such broadcasts.
This pull request changes the 3 remaining trickle use cases by random delays:
* Local address broadcast (while also removing the the wiping of the seen filter)
* Address relay
* Inv relay (for transactions; blocks are always relayed immediately)
The code is based on older commits by Patrick Strateman.
- Avoids string typos (by making the compiler check)
- Makes it easier to grep for handling/generation of a certain message type
- Refer directly to documentation by following the symbol in IDE
- Move list of valid message types to protocol.cpp:
protocol.cpp is a more appropriate place for this, and having
the array there makes it easier to keep things consistent.
2041190 test: Add basic test for `reject` code (Wladimir J. van der Laan)
9fc6ed6 net: Fix sent reject messages for blocks and transactions (Wladimir J. van der Laan)
fc0f52d Added a test for the pruning of extraneous inputs after ApproximateBestSet (Murch)
af9510e Moved set reduction to the end of ApproximateBestSubset to reduce performance impact (Murch)
5c03483 Coinselection prunes extraneous inputs from ApproximateBestSubset (AlSzacrel)
Some extra bytes in libconsensus to get all the crypto (except for signing, which is in the common module) below the libconsensus future independent repo (that has libsecp256k1 as a subtree).
hmac_sha256.o seems to be the only thing libbitcoinconsensus doesn't depend on from crypto, some more bytes for the final libconsensus: I'm not personally worried.
A further pass over the available inputs has been added to ApproximateBestSubset after a candidate set has been found. It will prune any extraneous inputs in the selected subset, in order to decrease the number of input and the resulting change.
Remove necessity to call create_callback_map (as well as the function
itself) from the Python P2P test framework. Invoke the appropriate
methods directly.
- Easy to forget to call it and wonder why it doesn't work
- Simplifies the code
- This makes it easier to handle new messages in subclasses
Mempool requests use a fair amount of bandwidth when the mempool is large,
disconnecting peers using them follows the same logic as disconnecting
peers fetching historical blocks.
aa4b0c2 When not filtering blocks, getdata sends more in one test (Pieter Wuille)
d41e44c Actually only use filterInventoryKnown with MSG_TX inventory messages. (Gregory Maxwell)
b6a0da4 Only use filterInventoryKnown with MSG_TX inventory messages. (Patick Strateman)
6b84935 Rename setInventoryKnown filterInventoryKnown (Patick Strateman)
e206724 Remove mruset as it is no longer used. (Gregory Maxwell)
ec73ef3 Replace setInventoryKnown with a rolling bloom filter. (Gregory Maxwell)
One test in AcceptToMemoryPool was to compare a transaction's fee
agains the value returned by GetMinRelayFee. This value was zero for
all small transactions. For larger transactions (between
DEFAULT_BLOCK_PRIORITY_SIZE and MAX_STANDARD_TX_SIZE), this function
was preventing low fee transactions from ever being accepted.
With this function removed, we will now allow transactions in that range
with fees (including modifications via PrioritiseTransaction) below
the minRelayTxFee, provided that they have sufficient priority.
Redo the feerate index to be based on mining score, rather than fee.
Update mempool_packages.py to test prioritisetransaction's effect on
package scores.
- Add new translations (finally, after a long time)
- update-translation script was not considering new translations - oops
- fixed this, also remove (nearly) empty translations
- Update translation process, it was still describing the old repository
structure
2740c4f Merge branch '2015_11_escape_plan' into bitcoin
7482163 Add new testcase to Makefile.am
46098ee Version 1.0.1.
ccf3575 parser: Ensure multiple values cannot follow each other
eb6cd64 Omit Obj/Arr open token from jsonTokenIsValue() test
bfef9e2 Makefile.am: list recently added test data, fail{35,36}.json
3e319f3 parser: Tighten array, object syntax checks.
c74185c parser: transform C++ variables into bitmask
f2568bc Prefer C++ STL vector .at() for accessing object values.
8eafa26 travis: run parallel 'make distcheck'
fd448da test: Improve tester diagnostics. Add failing test case from #15
2158205 Use internal, locale-independent isspace(), isdigit() implementations.
2ab9ad4 travis: Make 'make distcheck' for more comprehensive checks.
3339191 Escape all control characters
git-subtree-dir: src/univalue
git-subtree-split: 2740c4f71242086a7eb3dc32f812546ba9fad913
dd5862c Flush coins cache also after transaction processing (Pieter Wuille)
bde953e Uncache input txn in utxo cache if a tx is not accepted to mempool (Matt Corallo)
97bf377 Add CCoinsViewCache::HaveCoinsInCache to check if a tx is cached (Matt Corallo)
677aa3d Discard txn cache entries that were loaded for removed mempool txn (Matt Corallo)
b2e74bd Get the set of now-uncacheable-txn from CTxMemPool::TrimToSize (Matt Corallo)
74d0f90 Add method to remove a tx from CCoinsViewCache if it is unchanged (Matt Corallo)
553cad9 Rewrite CreateNewBlock (Alex Morcos)
5f12263 Expose FormatStateMessage (Alex Morcos)
1f09287 Make accessing mempool parents and children public (Alex Morcos)
7230187 Add TxPriority class and comparator (Alex Morcos)
f3fe836 Add a score index to the mempool. (Alex Morcos)
c49d5bc Store the total sig op count of a tx. (Alex Morcos)
Use the score index on the mempool to only add sorted txs in order. Remove much of the validation while building the block, relying on mempool to be consistent and only contain txs that can be mined.
The mempool is assumed to be consistent as far as not containing txs which spend non-existent outputs or double spends, and scripts are valid. Finality of txs is still checked (except not coinbase maturity, assumed in mempool).
Still TestBlockValidity in case mempool consistency breaks and return error state if an invalid block was created.
Unit tests are modified to realize that invalid blocks can now be constructed if the mempool breaks its consistency assumptions and also updated to have the right fees, since the cached value is now used for block construction.
Conflicts:
src/miner.cpp
The score index is meant to represent the order of priority for being included in a block for miners. Initially this is set to the transactions modified (by any feeDelta) fee rate. Index improvements and unit tests by sdaftuar.
Store sum of legacy and P2SH sig op counts. This is calculated in AcceptToMemory pool and storing it saves redoing the expensive calculation in block template creation.
But keep translating them in the GUI.
This - necessarily - requires duplication of a few messages.
Alternative take on #7134, that keeps the translations from being wiped.
Also document GetWarnings() input argument.
Fixes#5895.
ff723da [Qt] improve minimum absolute fee option - Only display the minimum absolute fee control if CoinControl is enabled (Jonas Schnelli)
31b508a [Qt] make use of the nMinimumTotalFee (absolute) in coincontrols fee calculation (Jonas Schnelli)
80462dd [Qt] use ASYMP_UTF8 (≈) whenever we show a fee that is not absolute (Jonas Schnelli)
ecc7c82 Move fPayAtLeastCustomFee function to CC (Pieter Wuille)
ebb25f4 Limit setAskFor and retire requested entries only when a getdata returns. (Gregory Maxwell)
5029698 prevent peer flooding request queue for an inv (kazcw)
Make RPC tests have a default block priority size of 50000 (the old default) so we can still use free transactions in RPC tests. When priority is eliminated, we will have to make a different change if we want to continue allowing free txs.
9af5f9c Move uiInterface.NotifyBlockTip signal above the core/wallet signal - This will keep getbestblockhash more in sync with blocknotify callbacks (Jonas Schnelli)
4082e46 [Qt] call GuessVerificationProgress synchronous during core signal, pass double over UI signal (Jonas Schnelli)
947d20b [Qt] reduce cs_main in getVerificationProgress() (Jonas Schnelli)
e6d50fc [Qt] update block tip (height and date) without locking cs_main, update always (each block) (Jonas Schnelli)
012fc91 NotifyBlockTip signal: switch from hash (uint256) to CBlockIndex* - also adds a boolean for indication if the tip update was happening during initial sync - emit notification also during initial sync (Jonas Schnelli)
Mruset setInventoryKnown was reduced to a remarkably small 1000
entries as a side effect of sendbuffer size reductions in 2012.
This removes setInventoryKnown filtering from merkleBlock responses
because false positives there are especially unattractive and
also because I'm not sure if there aren't race conditions around
the relay pool that would cause some transactions there to
be suppressed. (Also, ProcessGetData was accessing
setInventoryKnown without taking the required lock.)
This replaces using inv messages to announce new blocks, when a peer requests
(via the new "sendheaders" message) that blocks be announced with headers
instead of inv's.
Since headers-first was introduced, peers send getheaders messages in response
to an inv, which requires generating a block locator that is large compared to
the size of the header being requested, and requires an extra round-trip before
a reorg can be relayed. Save time by tracking headers that a peer is likely to
know about, and send a headers chain that would connect to a peer's known
headers, unless the chain would be too big, in which case we revert to sending
an inv instead.
Based off of @sipa's commit to announce all blocks in a reorg via inv,
which has been squashed into this commit.
Rebased-by: Pieter Wuille
This allows for much finer control of the transaction fees per kilobyte
as it prevent small transactions using a fee that is more appropriate
for one that is of a kilobyte.
This also allows controlling the fee per kilobyte over rpc such that:
bitcoin-cli settxfee `bitcoin-cli estimatefee 2`
would make sense, while currently it grossly fails often by a factor of x3
fa41d4c [qt] Move GUI related HelpMessage() part downstream (MarcoFalke)
faf93f3 [trivial] Reuse translation and cleanup DEFAULT_* values (MarcoFalke)
3307bdb Bugfix: Omit wallet-related options from -help when wallet is not supported (Luke Dashjr)
b966aa8 Constrain constant values to a single location in code (Luke Dashjr)
For each 'bit' in the filter we really maintain 2 bits, which store either:
0: not set
1-3: set in generation N
After (nElements / 2) insertions, we switch to a new generation, and wipe
entries which already had the new generation number, effectively switching
from the last 1.5 * nElements set to the last 1.0 * nElements set.
This is 25% more space efficient than the previous implementation, and can
(at peak) store 1.5 times the requested amount of history (though only
1.0 times the requested history is guaranteed).
The existing unit tests should be sufficient.
This switches the Merkle tree logic for blocks to one that runs in constant (small) space.
The old code is moved to tests, and a new test is added that for various combinations of
block sizes, transaction positions to compute a branch for, and mutations:
* Verifies that the old code and new code agree for the Merkle root.
* Verifies that the old code and new code agree for the Merkle branch.
* Verifies that the computed Merkle branch is valid.
* Verifies that mutations don't change the Merkle root.
* Verifies that mutations are correctly detected.
a46f87f Initialize logging before we do parameter interaction (Jonas Schnelli)
df66147 Move -blocksonly parameter interaction to the new ParameterInteraction() function (Jonas Schnelli)
68354e7 [QT] Call inits parameter interaction before we create the options model (Jonas Schnelli)
411b05a Refactor parameter interaction, call it before AppInit2() (Jonas Schnelli)
This makes sure that retransmits by a whitelisted peer also actually
result in a retransmit.
Further, this changes the logic to never relay in case we would assign
a DoS score, as we expect to get DoS banned ourselves as a result.
Adds 127.0.0.1:9050 for the .onion proxy if we can succesfully connect
to the control port.
Natural followup to creating hidden services automatically.
Previously all of these functions could return negative values (for different
readons). Large portions of the codebase currently assume that these
functions return positive values.
Previously peers which implement a protocol version less than NO_BLOOM_VERSION
would not be disconnected for sending a filter command, regardless of the
peerbloomfilter option.
Many node operators do not wish to provide expensive bloom filtering for SPV
clients, previously they had to cherry pick the commit which enabled the
disconnect logic.
The default should remain false until a sufficient percent of SPV clients
have updated.
1) Chainparams: Explicit CChainParams arg for main:
-AcceptBlock
-AcceptBlockHeader
-ActivateBestChain
-ConnectTip
-InitBlockIndex
-LoadExternalBlockFile
-VerifyDB parametric constructor
2) Also pickup more Params()\. in main.cpp
3) Pass nPruneAfterHeight explicitly to new FindFilesToPrune() in main.cpp
The setAskFor duplicate elimination was too eager and removed entries
when we still had no getdata response, allowing the peer to keep
INVing and not responding.
mapAlreadyAskedFor does not keep track of which peer has a request queued for a
particular tx. As a result, a peer can blind a node to a tx indefinitely by
sending many invs for the same tx, and then never replying to getdatas for it.
Each inv received will be placed 2 minutes farther back in mapAlreadyAskedFor,
so a short message containing 10 invs would render that tx unavailable for 20
minutes.
This is fixed by disallowing a peer from having more than one entry for a
particular inv in mapAlreadyAskedFor at a time.
80ae230 Improve log messages for blocks only violations. (Patick Strateman)
08843ed Add relaytxes status to getpeerinfo (Peter Todd)
d8aaa51 Bail early in processing transactions in blocks only mode. (Patick Strateman)
3587f6a Fix relay mechanism for whitelisted peers under blocks only mode. (Patick Strateman)
6531f17 Add mediantime field to getblock and getblockheader (Peter Todd)
7259769 Document new mediantime field in getblockchaininfo (Peter Todd)
c277a63 Clarify nLockTime-by-time comment in CheckFinalTx() (Peter Todd)
748321e Add mediantime field to getblockchaininfo RPC call (Peter Todd)
Previously in blocks only mode all inv messages where type!=MSG_BLOCK would be
rejected without regard for whitelisting or whitelistalwaysrelay.
As such whitelisted peers would never send the transaction (which would be
processed).
Compute the value of inputs that already are in the chain at time of mempool entry and only increase priority due to aging for those inputs. This effectively changes the CTxMemPoolEntry's GetPriority calculation from an upper bound to a lower bound.
2cecb24 doc: change suite to trusty in gitian-building.md (Wladimir J. van der Laan)
957c0fd gitian: make windows build deterministic (Wladimir J. van der Laan)
2e31d74 gitian: use trusty for building (Wladimir J. van der Laan)
0b416c6 depends: qt PIDLIST_ABSOLUTE patch (Wladimir J. van der Laan)
9f251b7 devtools: add libraries for bitcoin-qt to symbol check (Wladimir J. van der Laan)
It's possible coins with the same hash exist when you create a duplicate coinbase, so previously we were reading from the database to make sure we had the old coins cached so if we were to spend the new ones, the old ones would also be spent. This pull instead just marks the new coins as not fresh if they are from a coinbase, so if they are spent they will be written all the way down to the database anyway overwriting any duplicates.
Previously it would break if you flushed a parent cache while there was a child cache referring to it. This change will allow the flushing of parent caches.
1cf3dd8 Add unit test for UpdateCoins (Alex Morcos)
03c8282 Make CCoinsViewTest behave like CCoinsViewDB (Alex Morcos)
14470f9 ModifyNewCoins saves database lookups (Alex Morcos)
This provides more conservative estimates and reacts more quickly to a backlog.
Unfortunately the unit test for fee estimation depends on the success threshold (and the decay) chosen; also modify the unit test for the new default success thresholds.
These are more useful fee and priority estimation functions. If there is no fee/pri high enough for the target you are aiming for, it will give you the estimate for the lowest target that you can reliably obtain. This is better than defaulting to the minimum. It will also pass back the target for which it returned an answer.
Remove sed-based qt PIDLIST_ABSOLUTE workaround, replace by a patch that
works for both old (such as used by Travis and Ubuntu Precise) and new
mingw (Ubuntu Trusty).
bbf49da Fix comment for blocksonly parameter interactions (Patick Strateman)
6a4982f Fix fRelayTxs comment (Patick Strateman)
59441a0 Display DEFAULT_WHITELISTALWAYSRELAY in help text (Patick Strateman)
71a2683 Use DEFAULT_BLOCKSONLY and DEFAULT_WHITELISTALWAYSRELAY constants (Patick Strateman)
762b13b Add help text for blocksonly and whitelistalwaysrelay (Patick Strateman)
3a96497 Add whitelistalwaysrelay option (Patick Strateman)
420fa81 Do not process tx inv's in blocksonly mode (Patick Strateman)
4044f07 Add blocksonly mode (Patick Strateman)
10953a7 Better error message for fundrawtransaction w/ empty vout (Peter Todd)
61e1eb2 Actually use includeWatching value in fundrawtransaction (Peter Todd)
Useful now that BIP113 is enforced for transactions entering the
mempool. Was previously only (indirectly) available by calling
getblocktemplate, a relatively expensive RPC call.
I've collected these over time, mostly adding notes after
troubleshooting obscure bugs. As I hope to get the community more
involved in the whole process, I think it is useful to add to the
developer-notes.
This continues/fixes #6719.
`event_base_loopbreak` was not doing what I expected it to, at least in
libevent 2.0.21.
What I expected was that it sets a timeout, given that no other pending
events it would exit in N seconds. However, what it does was delay the
event loop exit with 10 seconds, even if nothing is pending.
Solve it in a different way: give the event loop thread time to exit
out of itself, and if it doesn't, send loopbreak.
This speeds up the RPC tests a lot, each exit incurred a 10 second
overhead, with this change there should be no shutdown overhead in the
common case and up to two seconds if the event loop is blocking.
As a bonus this breaks dependency on boost::thread_group, as the HTTP
server minds its own offspring.
2bfb82b Merge pull request #35106aeea5 Turn secp256k1_ec_pubkey_serialize outlen to in/out
970164d Merge pull request #3486466625 Improvements for coordinate decompression
e2100ad Merge pull request #3478e48787 Change secp256k1_ec_pubkey_combine's count argument to size_t.
c69dea0 Clear output in more cases for pubkey_combine, adds tests.
269d422 Comment copyediting.
b4d17da Merge pull request #3444709265 Merge pull request #34526abce7 Adds 32 static test vectors for scalar mul, sqr, inv.
5b71a3f Better error case handling for pubkey_create & pubkey_serialize, more tests.
3b7bc69 Merge pull request #343eed87af Change contrib/laxder from headers-only to files compilable as standalone C
d7eb1ae Merge pull request #3427914a6e Make lax_der_privatekey_parsing.h not depend on internal code
73f64ff Merge pull request #3399234391 Overhaul flags handling
1a36898 Make flags more explicit, add runtime checks.
1a3e03a Merge pull request #34096be204 Add additional tests for eckey and arg-checks.
bb5aa4d Make the tweak function zeroize-output-on-fail behavior consistent.
4a243da Move secp256k1_ec_privkey_import/export to contrib.
1b3efc1 Move secp256k1_ecdsa_sig_recover into the recovery module.
e3cd679 Eliminate all side-effects from VERIFY_CHECK() usage.
b30fc85 Avoid nonce_function_rfc6979 algo16 argument emulation.
70d4640 Make secp256k1_ec_pubkey_create skip processing invalid secret keys.
6c476a8 Minor comment improvements.
131afe5 Merge pull request #3340c6ab2f Introduce explicit lower-S normalization
fea19e7 Add contrib/lax_der_parsing.h
3bb9c44 Rewrite ECDSA signature parsing code
fa57f1b Use secp256k1_rand_int and secp256k1_rand_bits more
49b3749 Add new tests for the extra testrand functions
f684d7d Faster secp256k1_rand_int implementation
251b1a6 Improve testrand: add extra random functions
31994c8 Merge pull request #338f79aa88 Bugfix: swap arguments to noncefp
c98df26 Merge pull request #31967f7da4 Extensive interface and operations tests for secp256k1_ec_pubkey_parse.
ee2cb40 Add ARG_CHECKs to secp256k1_ec_pubkey_parse/secp256k1_ec_pubkey_serialize
7450ef1 Merge pull request #32868a3c76 Merge pull request #32998135ee Merge pull request #33237100d7 improve ECDH header-doc
b13d749 Fix couple of typos in API comments
7c823e3 travis: fixup module configs
cc3141a Merge pull request #325ee58fae Merge pull request #326213aa67 Do not force benchmarks to be statically linked.
338fc8b Add API exports to secp256k1_nonce_function_default and secp256k1_nonce_function_rfc6979.
52fd03f Merge pull request #3209f6993f Remove some dead code.
357f8cd Merge pull request #314118cd82 Use explicit symbol visibility.
4e64608 Include public module headers when compiling modules.
1f41437 Merge pull request #316fe0d463 Merge pull request #317cfe0ed9 Fix miscellaneous style nits that irritate overactive static analysis.
2b199de Use the explicit NULL macro for pointer comparisons.
9e90516 Merge pull request #294dd891e0 Get rid of _t as it is POSIX reserved
201819b Merge pull request #313912f203 Eliminate a few unbraced statements that crept into the code.
eeab823 Merge pull request #299486b9bb Use a flags bitfield for compressed option to secp256k1_ec_pubkey_serialize and secp256k1_ec_privkey_export
05732c5 Callback data: Accept pointers to either const or non-const data
1973c73 Bugfix: Reinitialise buffer lengths that have been used as outputs
788038d Use size_t for lengths (at least in external API)
c9d7c2a secp256k1_context_set_{error,illegal}_callback: Restore default handler by passing NULL as function argument
9aac008 secp256k1_context_destroy: Allow NULL argument as a no-op
64b730b secp256k1_context_create: Use unsigned type for flags bitfield
cb04ab5 Merge pull request #309a551669 Merge pull request #29581e45ff Update group_impl.h
85e3a2c Merge pull request #112b2eb63b Merge pull request #293dc0ce9f [API BREAK] Change argument order to out/outin/in
6d947ca Merge pull request #298c822693 Merge pull request #3016d04350 Merge pull request #3037ab311c Merge pull request #3045fb3229 Fixes a bug where bench_sign would fail due to passing in too small a buffer.
263dcbc remove unused assignment
b183b41 bugfix: "ARG_CHECK(ctx != NULL)" makes no sense
6da1446 build: fix parallel build
5eb4356 Merge pull request #291c996d53 Print success
9f443be Move pubkey recovery code to separate module
d49abbd Separate ECDSA recovery tests
439d34a Separate recoverable and normal signatures
a7b046e Merge pull request #289f66907f Improve/reformat API documentation secp256k1.h
2f77487 Add context building benchmarks
cc623d5 Merge pull request #287de7e398 small typo fix
9d96e36 Merge pull request #280432e1ce Merge pull request #28314727fd Use correct name in gitignore
356b0e9 Actually test static precomputation in Travis
ff3a5df Merge pull request #2842587208 Merge pull request #212a5a66c7 Add support for custom EC-Schnorr-SHA256 signatures
d84a378 Merge pull request #25272ae443 Improve perf. of cmov-based table lookup
92e53fc Implement endomorphism optimization for secp256k1_ecmult_const
ed35d43 Make `secp256k1_scalar_add_bit` conditional; make `secp256k1_scalar_split_lambda_var` constant time
91c0ce9 Add benchmarks for ECDH and const-time multiplication
0739bbb Add ECDH module which works by hashing the output of ecmult_const
4401500 Add constant-time multiply `secp256k1_ecmult_const` for ECDH
e4ce393 build: fix hard-coded usage of "gen_context"
b8e39ac build: don't use BUILT_SOURCES for the static context header
baa75da tests: add a couple tests
ae4f0c6 Merge pull request #278995c548 Introduce callback functions for dealing with errors.
c333074 Merge pull request #28218c329c Remove the internal secp256k1_ecdsa_sig_t type
74a2acd Add a secp256k1_ecdsa_signature_t type
23cfa91 Introduce secp256k1_pubkey_t type
4c63780 Merge pull request #2693e6f1e2 Change rfc6979 implementation to be a generic PRNG
ed5334a Update configure.ac to make it build on OpenBSD
1b68366 Merge pull request #274a83bb48 Make ecmult static precomputation default
166b32f Merge pull request #276c37812f Add gen_context src/ecmult_static_context.h to CLEANFILES to fix distclean.
125c15d Merge pull request #27576f6769 Fix build with static ecmult altroot and make dist.
5133f78 Merge pull request #254b0a60e6 Merge pull request #258733c1e6 Add travis build to test the static context.
fbecc38 Add ability to use a statically generated ecmult context.
4fb174d Merge pull request #263
4ab8990 Merge pull request #270bdf0e0c Merge pull request #27131d0c1f Merge pull request #273eb2c8ff Add missing casts to SECP256K1_FE_CONST_INNER
55399c2 Further performance improvements to _ecmult_wnaf
99fd963 Add secp256k1_ec_pubkey_compress(), with test similar to the related decompress() function.
145cc6e Improve performance of _ecmult_wnaf
36b305a Verify the result of GMP modular inverse using non-GMP code
0cbc860 Merge pull request #26606ff7fe Merge pull request #2675a43124 Save 1 _fe_negate since s1 == -s2
a5d796e Update code comments
3f3964e Add specific VERIFY tests for _fe_cmov
7d054cd Refactor to save a _fe_negate
b28d02a Refactor to remove a local var
55e7fc3 Perf. improvement in _gej_add_ge
a0601cd Fix VERIFY calculations in _fe_cmov methods
17f7148 Merge pull request #2617657420 Add tests for adding P+Q with P.x!=Q.x and P.y=-Q.y
8c5d5f7 tests: Add failing unit test for #257 (bad addition formula)
5de4c5d gej_add_ge: fix degenerate case when computing P + (-lambda)P
bcf2fcf gej_add_ge: rearrange algebra
e2a07c7 Fix compilation with C++
873a453 Merge pull request #25091eb0da Merge pull request #247210ffed Use separate in and out pointers in `secp256k1_ec_pubkey_decompress`
a1d5ae1 Tiny optimization
729badf Merge pull request #2102d5a186 Apply effective-affine trick to precomp
4f9791a Effective affine addition in EC multiplication
2b4cf41 Use pkg-config always when possible, with failover to manual checks for libcrypto
git-subtree-dir: src/secp256k1
git-subtree-split: 2bfb82b10e
58ef0ff doc: update docs for Tor listening (Wladimir J. van der Laan)
68ccdc4 doc: Mention Tor listening in release notes (Wladimir J. van der Laan)
09c1ae1 torcontrol improvements and fixes (Wladimir J. van der Laan)
2f796e5 Better error message if Tor version too old (Peter Todd)
8f4e67f net: Automatically create hidden service, listen on Tor (Wladimir J. van der Laan)
- Force AUTHCOOKIE size to be 32 bytes: This provides protection against
an attack where a process pretends to be Tor and uses the cookie
authentication method to nab arbitrary files such as the
wallet
- torcontrol logging
- fix cookie auth
- add HASHEDPASSWORD auth, fix fd leak when fwrite() fails
- better error reporting when cookie file is not ok
- better init/shutdown flow
- stop advertizing service when disconnected from tor control port
- COOKIE->SAFECOOKIE auth
69d373f Don't wipe the sigcache in TestBlockValidity (Pieter Wuille)
0b9e9dc Evict sigcache entries that are seen in a block (Pieter Wuille)
830e3f3 Make sigcache faster and more efficient (Pieter Wuille)
Previous text could be interpreted as the the _additional_ fee paid by
the result on top of the fee the original version paid, rather than the
correct interpretation: the absolute fee the resulting tx pays.
Previously all conflicting transactions were evaluated as a whole to
determine if the feerate was being increased. This meant that low
feerate children pulled the feerate down, potentially allowing a high
transaction with a high feerate to be replaced by one with a lower
feerate.
Replaces transactions already in the mempool if a new transaction seen
with a higher fee, specifically both a higher fee per KB and a higher
absolute fee. Children are evaluateed for replacement as well, using the
mempool package tracking to calculate replaced fees/size. Transactions
can opt-out of transaction replacement by setting nSequence >= maxint-1
on all inputs. (which all wallets do already)
Starting with Tor version 0.2.7.1 it is possible, through Tor's control socket
API, to create and destroy 'ephemeral' hidden services programmatically.
https://stem.torproject.org/api/control.html#stem.control.Controller.create_ephemeral_hidden_service
This means that if Tor is running (and proper authorization is available),
bitcoin automatically creates a hidden service to listen on, without user
manual configuration. This will positively affect the number of available
.onion nodes.
- When the node is started, connect to Tor through control socket
- Send `ADD_ONION` command
- First time:
- Make it create a hidden service key
- Save the key in the data directory for later usage
- Make it redirect port 8333 to the local port 8333 (or whatever port we're listening on).
- Keep control socket connection open for as long node is running. The hidden service will
(by default) automatically go away when the connection is closed.
Process `getheaders` messages from whitelisted peers even if we are in
initial block download. Whitelisted peers can always use a node as a
block source.
Also log a debug message when the request is ignored, for
troubleshooting.
Fixes#6971.
- There is no libboost-base-dev, no idea how I ended up with this
- Without that, installing separate boost packages works fine on both
Ubuntu 14.04 and Debian 7 (tested on VMs), this did not use to be
the case, AFAIK.
- Add a missing 'sudo' for consistency
- Need `bsdmainutils` for `hexdump` (for the tests)
d1c3762 Revert "Revert "Enable policy enforcing GetMedianTimePast as the end point of lock-time constraints"" (Gregory Maxwell)
e4e5334 Restore MedianTimePast for locktime. (Gregory Maxwell)
Previously, the undo weren't being flushed during a reindex because
fKnown was set to true in FindBlockPos. That is the correct behaviour
for block files as they aren't being touched, but undo files are
touched.
This changes the behaviour to always flush when switching to a new file
(even for block files, though that isn't really necessary).
The docs talk about bits 2 and 4 instead of 2 and 3, and bits are being
indexed from both 1 (describing nCode) and 0 (in second example).
Changed to use zero-indexing for all.
6342a48 Init: Use DEFAULT_TRANSACTION_MINFEE in help message (MarcoFalke)
a9c73a1 [wallet] Add comments for doxygen (MarcoFalke)
6b0e622 [wallet] Refactor to use new MIN_CHANGE (MarcoFalke)
a6efc01 Bugfix: Omit wallet-related options from -help when wallet is disabled (Luke Dashjr)
5f9260f Bugfix: If genproclimit is omitted to RPC setgenerate, don't change it; also show correct default in getmininginfo (Luke Dashjr)
420a82f Bugfix: Describe dblogsize option correctly (it refers to the wallet database, not memory pool) (Luke Dashjr)
caa3d42 Bugfix: RPC: blockchain: Display correct defaults in help for verifychain method (Luke Dashjr)
Moves the call Initialize() from init.cpp to CreateWithArguments() and handles the
return value. Moves the call Shutdown() from init.cpp to destructor.
Changes Initialize() and Shutdown() to protected members.
Revert "Revert "Add rules--presently disabled--for using GetMedianTimePast as endpoint for lock-time calculations""
This reverts commit 40cd32e835.
After careful analysis it was determined that the change was, in fact, safe and several people were suffering
momentary confusion about locktime semantics.
When processing a new transaction, in addition to spending the Coins of its txin's it creates a new Coins for its outputs. The existing ModifyCoins function will first make sure this Coins does not already exist. It can not exist due to BIP 30, but because of that the lookup can't be cached and always has to go to the database. Since we are creating the coins to match the new tx anyway, there is no point in checking if they exist first anyway. However this should not be used for coinbase tx's in order to preserve the historical behavior of overwriting the two existing duplicate tx pairs.
40cd32e Revert "Add rules--presently disabled--for using GetMedianTimePast as endpoint for lock-time calculations" (Gregory Maxwell)
8537ecd Revert "Enable policy enforcing GetMedianTimePast as the end point of lock-time constraints" (Gregory Maxwell)
This reverts commit 9d55050773.
As noted by Luke-Jr, under some conditions this will accept transactions which are invalid by the network
rules. This happens when the current block time is head of the median time past and a transaction's
locktime is in the middle.
This could be addressed by changing the rule to MAX(this_block_time, MTP+offset) but this solution and
the particular offset used deserve some consideration.
* Introduce new constant MIN_CHANGE and use it instead of the
hardcoded "CENT"
* Add test case for MIN_CHANGE
* Introduce new constant for -mintxfee default:
DEFAULT_TRANSACTION_MINFEE = 1000
Reduce the default limits on maximum number of transactions and the cumulative size of those transactions in both ancestor and descendant packages to 25 txs and 101kb total size.
Update the unittest that is meant to catch a transaction that is invalid
because it has a null input. The old test failed not because of that
but because it was considered a coinbase with too large script. This is
already checked with a different test, though.
The new test is *not* a coinbase since it has two inputs, but one of
them is null. This really checks the corresponding code path in
CheckTransaction.
143d173 Use BOOST_CHECK_MESSAGE() rather than BOOST_CHECK() in alerts_tests.cpp and initialize strMiscWarning before calling PartitionCheck()." (Eric Lombrozo)
* -maxuploadtarget can be set in MiB
* if <limit> - ( time-left-in-24h-cycle / 600 * MAX_BLOCK_SIZE ) has reach, stop serve blocks older than one week and filtered blocks
* no action if limit has reached, no guarantee that the target will not be surpassed
* add outbound limit informations to rpc getnettotals
dea8d21 Enable policy enforcing GetMedianTimePast as the end point of lock-time constraints (Mark Friedenbach)
9d55050 Add rules--presently disabled--for using GetMedianTimePast as endpoint for lock-time calculations (Mark Friedenbach)
d80e3cb Support gathering of code coverage data for RPC tests (dexX7)
e3b5e6c Run extended BitcoinJ tests for coverage based on config (dexX7)
45d4ff0 Add config option to enable extended RPC tests for code coverage (dexX7)
8e3a27b Require Python for RPC tests, when using lcov (dexX7)
d425877 Remove coverage and test related files, when cleaning up (dexX7)
4d2a926 Ignore coverage data related and temporary test files (dexX7)
The RPC tests (via `qa/pull-tester/rpc-tests.py`) are now executed,
when gathering code coverage data, for example with `make cov`.
Generating coverage data requires `lcov`, which can installed with:
sudo apt-get install lcov
To also use the BitcoinJ tests, get the test tool:
TOOL_URL=https://github.com/theuni/bitcoind-comparisontool/raw/master/pull-tests-8c6666f.jar
TOOL_HASH=a865332b3827abcde684ab79f5f43c083b0b6a4c97ff5508c79f29fee24f11cd
wget $TOOL_URL -O ./share/BitcoindComparisonTool.jar
echo "$TOOL_HASH ./share/BitcoindComparisonTool.jar" | shasum --algorithm 256 --check
The coverage data can be generated with:
./autogen.sh
./configure --enable-lcov --with-comparison-tool=./share/BitcoindComparisonTool.jar
make
make cov
Optionally the options `--enable-extended-rpc-tests` and
`--enable-comparison-tool-reorg-tests` may be used to enable more time
consuming tests.
It then runs the tests and generates two HTML reports:
- test_bitcoin.coverage/index.html
- total.coverage/index.html
Because Python is (going to be) used to run the RPC tests, when
gathering coverage data with lcov, it is explicitly checked, whether
Python is really available.
Until now there were quite a few leftovers, and only the coverage
related files in `src/` were cleaned, while the ones in the other dirs
remained. `qa/tmp/` is related to the BitcoinJ tests, and `cache/` is
related to RPC tests.
Transactions are not allowed in the memory pool or selected for inclusion in a block until their lock times exceed chainActive.Tip()->GetMedianTimePast(). However blocks including transactions which are only mature under the old rules are still accepted; this is *not* the soft-fork required to actually rely on the new constraint in production.
The lock-time code currently uses CBlock::nTime as the cutoff point for time based locked transactions. This has the unfortunate outcome of creating a perverse incentive for miners to lie about the time of a block in order to collect more fees by including transactions that by wall clock determination have not yet matured. By using CBlockIndex::GetMedianTimePast from the prior block instead, the self-interested miner no longer gains from generating blocks with fraudulent timestamps. Users can compensate for this change by simply adding an hour (3600 seconds) to their time-based lock times.
If enforced, this would be a soft-fork change. This commit only adds the functionality on an unexecuted code path, without changing the behaviour of Bitcoin Core.
Nagle appears to be a significant contributor to latency now that the static
sleeps are gone. Most of our messages are relatively large compared to
IP + TCP so I do not expect this to create enormous overhead.
This may also reduce traffic burstyness somewhat.
Perform the following ELF security checks:
- PIE: Check for position independent executable (PIE), allowing for address space randomization
- NX: Check that no sections are writable and executable (including the stack)
- RELRO: Check for read-only relocations, binding at startup
- Canary: Check for use of stack canary
Also add a check to symbol-check.py that checks that only the subset of
allowed libraries is imported (to avoid incompatibilities).
This passes `-Wa,--noexecstack` to the assembler when building
platform-specific assembly files, to signal that a non-executable stack
can be used. This is the same approach as used by Debian
(see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=430583)
Add a comment that explains why the initial "getheader" requests are
made starting from the block preceding the currently best one.
Thanks to sdaftuar for the explanation!
There is no exact science to setting this parameter, but 5000
(just over 1 US cent at the time of writing) is higher than the
cost to relay a transaction around the network (the new benchmark
due to mempool limiting).
After each transaction which is added to mempool, we first call
Expire() to remove old transactions, then throwing away the
lowest-feerate transactions.
After throwing away transactions by feerate, we set the minimum
relay fee to the maximum fee transaction-and-dependant-set we
removed, plus the default minimum relay fee.
After the next block is received, the minimum relay fee is allowed
to decrease exponentially. Its halflife defaults to 12 hours, but
is decreased to 6 hours if the mempool is smaller than half its
maximum size, and 3 hours if the mempool is smaller than a quarter
its maximum size.
The minimum -maxmempool size is 40*-limitdescendantsize, as it is
easy for an attacker to play games with the cheapest
-limitdescendantsize transactions. -maxmempool defaults to 300MB.
This disables high-priority transaction relay when the min relay
fee adjustment is >0 (ie when the mempool is full). When the relay
fee adjustment drops below the default minimum relay fee / 2 it is
set to 0 (re-enabling priority-based free relay).
(note the 9x multiplier on (void*)'s for CTxMemPool::DynamicMemoryUsage
was accidentally introduced in 5add7a7 but should have waited for this
commit which adds the extra index)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
This message is to inform you that I, Paul Rabahy have rolled over GPG
keys.
My old key = EA695E0CE2D0DCB0D65167A8D1CBA2A21BCD88F6
My new key = D62A803E27E7F43486035ADBBCD04D8E9CCCAC2A
My new key now has an offline primary key with an online subkey that I
will be
using for normal communications.
I have signed this message with both the old and new key so it should show
up
as validly signed. Please add my new key to your keyring so that future
communication will be properly verified.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=JR4m
-----END PGP SIGNATURE-----
4e2efb3 tests: update transaction_tests for new dust threshold (Wladimir J. van der Laan)
28e3249 Bump minrelaytxfee default (Wladimir J. van der Laan)
Common sentiment is that the miniupnpc codebase likely contains further
vulnerabilities.
I'd prefer to get rid of the dependency completely, but a compromise for
now is to at least disable it by default.
To bridge the time until a dynamic method for determining this fee is
merged.
This is especially aimed at the stable releases (0.10, 0.11) because
full mempool limiting, as will be in 0.12, is too invasive and risky to
backport.
This version of miniupnpc fixes a buffer overflow in the XML (ugh)
parser during initial network discovery.
http://talosintel.com/reports/TALOS-2015-0035/
The commit fixing the vulnerability is:
79cca974a4
Reported by timothy on IRC.
bip65-cltv.py is based on the earlier BIP66 soft-fork RPC test
implemented by Pieter Wuille's 819bcf9b99
bip65-cltv-p2p.py is based on the earlier BIP66 P2P test by Suhas
Daftuar's d76412b068
1534d9a Creates unittests for addrman, makes addrman testable. Adds several unittests for addrman to verify it works as expected. Makes small modifications to addrman to allow deterministic and targeted tests. (EthanHeilman)
Adds an `obfuscate` parameter to `CLevelDBWrapper` and makes use of it
for all new chainstate stores built via `CCoinsViewDB`. Also adds an
`Xor` method to `CDataStream`.
Thanks to @sipa @laanwj @pstratem @dexX7 @KyrosKrane @gmaxwell.
This adds SCRIPT_VERIFY_LOW_S to STANDARD_SCRIPT_VERIFY_FLAGS which
will make the node require the canonical 'low-s' encoding for
ECDSA signatures when relaying or mining.
Consensus behavior is unchanged.
The rational is explained in a81cd96805:
Absent this kind of test ECDSA is not a strong signature as given
a valid signature {r, s} both that value and {r, -s mod n} are valid.
These two encodings have different hashes allowing third parties a
vector to change users txids. These attacks are avoided by picking
a particular form as canonical and rejecting the other form(s); in
the of the LOW_S rule, the smaller of the two possible S values is
used.
If widely deployed this change would eliminate the last remaining
known vector for nuisance malleability on boring SIGHASH_ALL
p2pkh transactions. On the down-side it will block most
transactions made by sufficiently out of date software.
Unlike the other avenues to change txids on boring transactions this
one was randomly violated by all deployed bitcoin software prior to
its discovery. So, while other malleability vectors where made
non-standard as soon as they were discovered, this one has remained
permitted. Even BIP62 did not propose applying this rule to
old version transactions, but conforming implementations have become
much more common since BIP62 was initially written.
Bitcoin Core has produced compatible signatures since a28fb70e in
September 2013, but this didn't make it into a release until 0.9
in March 2014; Bitcoinj has done so for a similar span of time.
Bitcoinjs and electrum have been more recently updated.
This does not replace the need for BIP62 or similar, as miners can
still cooperate to break transactions. Nor does it replace the
need for wallet software to handle malleability sanely[1]. This
only eliminates the cheap and irritating DOS attack.
[1] On the Malleability of Bitcoin Transactions
Marcin Andrychowicz, Stefan Dziembowski, Daniel Malinowski, Łukasz Mazurek
http://fc15.ifca.ai/preproceedings/bitcoin/paper_9.pdf
* Fixes#6679
* Tested with --disable-zmq
* Tested with and without pkgconfig
* Tested with and without zmq installed
Signed-off-by: Johnathan Corgan <johnathan@corganlabs.com>
- to match the peers.dat handling also supply a debug.log entry for how
many entries were loaded from banlist.dat and how long it took
- add a GUI init message for loading the banlist (same as with peers.dat)
- move the same message for peers.dat upwards in the code, to be able to
reuse the timing variable nStart and also just log, if our read from
peers.dat didn't fail
- only start working on/with banlist data, if reading in the banlist from
disk didn't fail
- as CNode::setBannedIsDirty is false (default) when reading fails, we
don't need to explicitly set it to false to prevent writing
banlist.dat in that case either
da894ab Accept any sequence of PUSHDATAs in OP_RETURN outputs (Peter Todd)
5d8709c Add IsPushOnly(const_iterator pc) (Peter Todd)
6a07eb6 Make TX_SCRIPTHASH clear vSolutionsRet first (Peter Todd)
1) created rpc-tests.py
2) deleted rpc-tests.sh
3) travis.yml points to rpc-tests.py
4) Modified Makefile.am
5) Updated README.md
6) Added tests_config.py and deleted tests-config.sh
7) Modified configure.ac with script to set correct path in tests_config.py
Prevent these warnings in clang 3.6:
./serialize.h:96:9: warning: explicitly assigning value of variable of type 'uint64_t' (aka 'unsigned long') to itself [-Wself-assign]
obj = (obj);
~~~ ^ ~~~
Previously only one PUSHDATA was allowed, needlessly limiting
applications such as matching OP_RETURN contents with bloom filters that
operate on a per-PUSHDATA level. Now any combination that passes
IsPushOnly() is allowed, so long as the total size of the scriptPubKey
is less than 42 bytes. (unchanged modulo non-minimal PUSHDATA encodings)
Also, this fixes the odd bug where previously the PUSHDATA could be
replaced by any single opcode, even sigops consuming opcodes such as
CHECKMULTISIG. (20 sigops!)
Previously unlike other transaction types the TX_SCRIPTHASH would not
clear vSolutionsRet, which means that unlike other transaction types if
it was called twice in a row you would get the result of the previous
invocation as well.
a3874c7 doc: no longer require use of openssl in OpenBSD build guide (Wladimir J. van der Laan)
5978388 build: remove libressl check (Wladimir J. van der Laan)
Now that BIP66 passed, OpenSSL is no longer directly part of the
consensus. What matters is that DER signatures are correctly parsed, and
secp256k1 crypto is implemented correctly (as well as the other
functions we use from OpenSSL, such as random number generation)
This means that effectively, using LibreSSL is not a larger risk than
using another version of OpenSSL.
Remove the specific check for LibreSSL.
Includes the still-relevant part of #6729: make sure CHECK_HEADER is
called using the right CXXFLAGS, not CFLAGS (as AC_LANG is c++).
Avoid calling gettimeofday every time through the benchmarking loop, by keeping
track of how long each loop takes and doubling the number of iterations done
between time checks when they take less than 1/16'th of the total elapsed time.
Benchmarking framework, loosely based on google's micro-benchmarking
library (https://github.com/google/benchmark)
Wny not use the Google Benchmark framework? Because adding Even More Dependencies
isn't worth it. If we get a dozen or three benchmarks and need nanosecond-accurate
timings of threaded code then switching to the full-blown Google Benchmark library
should be considered.
The benchmark framework is hard-coded to run each benchmark for one wall-clock second,
and then spits out .csv-format timing information to stdout. It is left as an
exercise for later (or maybe never) to add command-line arguments to specify which
benchmark(s) to run, how long to run them for, how to format results, etc etc etc.
Again, see the Google Benchmark framework for where that might end up.
See src/bench/MilliSleep.cpp for a sanity-test benchmark that just benchmarks
'sleep 100 milliseconds.'
To compile and run benchmarks:
cd src; make bench
Sample output:
Benchmark,count,min,max,average
Sleep100ms,10,0.101854,0.105059,0.103881
ab0b8be zmq: update and cleanup build-unix, release-notes, and zmq docs (Johnathan Corgan)
6cebd5d zmq: require version 4.x or newer of libzmq (Johnathan Corgan)
ec908d5 http: Force-exit event loop after predefined time (Wladimir J. van der Laan)
de9de2d http: Wait for worker threads to exit (Wladimir J. van der Laan)
5e0c221 Make HTTP server shutdown more graceful (Wladimir J. van der Laan)
This makes sure that the event loop eventually terminates, even if an
event (like an open timeout, or a hanging connection) happens to be
holding it up.
Add a WaitExit() call to http's WorkQueue to make it delete the work
queue only when all worker threads stopped.
This fixes a problem that was reproducable by pressing Ctrl-C during
AppInit2:
```
/usr/include/boost/thread/pthread/condition_variable_fwd.hpp:81: boost::condition_variable::~condition_variable(): Assertion `!ret' failed.
/usr/include/boost/thread/pthread/mutex.hpp:108: boost::mutex::~mutex(): Assertion `!posix::pthread_mutex_destroy(&m)' failed.
```
I was assuming that `threadGroup->join_all();` would always have been
called when entering the Shutdown(). However this is not the case in
bitcoind's AppInit2-non-zero-exit case "was left out intentionally
here".
Shutting down the HTTP server currently breaks off all current requests.
This can create a race condition with RPC `stop` command, where the calling
process never receives confirmation.
This change removes the listening sockets on shutdown so that no new
requests can come in, but no longer breaks off requests in progress.
Meant to fix#6717.
The "please check your computer's data and time" message when the clock
deviates from the network currently generates an overkill of messages:
orion@lethe:~/bitcoin$ src/bitcoind
Warning: Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin Core will not work properly.
In the log:
2015-09-27 16:24:13 *** Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin Core will not work properly.
2015-09-27 16:24:13 Warning: Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin Core will not work properly.
Remove one level of 'Warning:' and reduce to one log message.
023919b Fix debian/copyright list to be non-comma-separated. (Matt Corallo)
71afc68 Update debian/copyright format version to 1.0 (Matt Corallo)
d4ca868 Use standard license names in contrib/debian/copyright (Matt Corallo)
af3208b Resolve issue 3166. These changes decode valid SIGHASH types on signatures in assembly (asm) representations of scriptSig scripts. This squashed commit incorporates substantial helpful feedback from jtimon, laanwj, and sipa. (mruddy)
b0beae8 Drop "with minimal dependencies" from description (Zak Wilcox)
5e5e00b Split bitcoin-tx into its own package (Zak Wilcox)
05179f7 Include bitcoin-tx binary on Debian/Ubuntu (Zak Wilcox)
CalculateMemPoolAncestors was always looping over a transaction's inputs
to find in-mempool parents. When adding a new transaction, this is the
correct behavior, but when removing a transaction, we want to use the
ancestor set that would be calculated by walking mapLinks (which should
in general be the same set, except during a reorg when the mempool is
in an inconsistent state, and the mapLinks-based calculation would be the
correct one).
* Raise the debug window when hidden behind other windows
* Switch to the debug window when on another virtual desktop
* Show the debug window when minimized
This change is a conceptual copy of 5ffaaba and 382e9e2
Assume that when a wallet transaction has a valid block hash and transaction position
in it, the transaction is actually there. We're already trusting wallet data in a
much more fundamental way anyway.
To prevent backward compatibility issues, a new record is used for storing the
block locator in the wallet. Old wallets will see a wallet file synchronized up
to the genesis block, and rescan automatically.
7aac6db [QT] dump banlist to disk in case of ban/unban over QT (Jonas Schnelli)
7f90ea7 [QA] adabt QT_NO_KEYWORDS for QT ban implementation (Jonas Schnelli)
07f70b2 [QA] fix netbase tests because of new CSubNet::ToString() output (Jonas Schnelli)
4ed0510 [Qt] call DumpBanlist() when baning unbaning nodes (Philip Kaufmann)
be89292 [Qt] reenabling hotkeys for ban context menu, use different words (Jonas Schnelli)
b1189cf [Qt] adapt QT ban option to banlist.dat changes (Jonas Schnelli)
65abe91 [Qt] add sorting for bantable (Philip Kaufmann)
51654de [Qt] bantable polish (Philip Kaufmann)
cdd72cd [Qt] simplify ban list signal handling (Philip Kaufmann)
43c1f5b [Qt] remove unused timer-code from banlistmodel.cpp (Jonas Schnelli)
e2b8028 net: Fix CIDR notation in ToString() (Wladimir J. van der Laan)
9e521c1 [Qt] polish ban table (Philip Kaufmann)
607809f net: use CIDR notation in CSubNet::ToString() (Jonas Schnelli)
53caec6 [Qt] bantable overhaul (Jonas Schnelli)
f0bcbc4 [Qt] bantable fix timestamp 64bit issue (Jonas Schnelli)
6135309 [Qt] banlist, UI optimizing and better signal handling (Jonas Schnelli)
770ca79 [Qt] add context menu with unban option to ban table (Jonas Schnelli)
5f42132 [Qt] add ui signal for banlist changes (Jonas Schnelli)
ad204df [Qt] add banlist table below peers table (Jonas Schnelli)
50f0908 [Qt] add ban functions to peers window (Jonas Schnelli)
ddf98d1 Make RPC tests cope with server-side timeout between requests (Wladimir J. van der Laan)
2190ea6 rpc: Split option -rpctimeout into -rpcservertimeout and -rpcclienttimeout (Wladimir J. van der Laan)
8b2d6ed http: Disable libevent debug logging, if not explicitly enabled (Wladimir J. van der Laan)
5ce43da init: Ignore SIGPIPE (Wladimir J. van der Laan)
Python's httplib does not graciously handle disconnections from the http server, resulting in BadStatusLine errors.
See https://bugs.python.org/issue3566 "httplib persistent connections violate MUST in RFC2616 sec 8.1.4."
This was fixed in Python 3.5.
Work around it for now.
The two timeouts for the server and client, are essentially different:
- In the case of the server it should be a lower value to avoid clients
clogging up connection slots
- In the case of the client it should be a high value to accomedate slow
responses from the server, for example for slow queries or when the
lock is contended
Split the options into `-rpcservertimeout` and `-rpcclienttimeout` with
respective defaults of 30 and 900.
Associate with each CTxMemPoolEntry all the size/fees of descendant
mempool transactions. Sort mempool by max(feerate of entry, feerate
of descendants). Update statistics on-the-fly as transactions enter
or leave the mempool.
Also add ancestor and descendant limiting, so that transactions can
be rejected if the number or size of unconfirmed ancestors exceeds
a target, or if adding a transaction would cause some other mempool
entry to have too many (or too large) a set of unconfirmed in-
mempool descendants.
Ignore SIGPIPE on all non-win32 OSes, otherwise an unexpectedly disconnecting
RPC client will terminate the application. This problem was introduced
with the libhttp-based RPC server.
Fixes#6660.
The thin space QT html hack results in cut-off chars/nums after a line break.
Avoid word wrap line breaks by using a smaller font and a line break before each alternative value)
GetTransaction needs to lock cs_main until ReadBlockFromDisk completes, the data inside CBlockIndex's can change since pruning. This lock was held by all calls to GetTransaction except rest_tx.
done automatically.
At some point along the line, fully offline builds were no longer happening
when strictly following the release-process.md instructions.
We should ensure that users who might want to torify or build offline need
to take extra steps to remain offline.
Also, corrections to build process: including gverify examples for new builders.
- removes mapBlockIndex find operation
- theoretically allows removing the cs_main lock during zqm notification while introducing a new file position lock
- add missing NULL pointer checks
- add better comments and reorder some code in rpcconsole.cpp
- remove unneeded leftovers in bantable.cpp
- update bantable column sizes to prevent cutting of banned until
- remove banListChanged signal from client model
- directly call clientModel->getBanTableModel()->refresh() without the way
over clientModel->updateBanlist()
- also fix clearing peer detail window, when selecting (clicking)
peers in the ban list
Continues Johnathan Corgan's work.
Publishing multipart messages
Bugfix: Add missing zmq header includes
Bugfix: Adjust build system to link ZeroMQ code for Qt binaries
We log the cleanSubVer as part of connect. It is not uniquely more informative
than any of the other data we have about a peer, often less. It's also often
long now as well. There is no need to output it as part of mempoolrej,
AcceptToMemoryPool, or pong entries. Leaving it out makes our log entries
more uniform and consistent.
This patch changes the way the suffix (giving the requested data format) is
parsed for REST requests. Before, the string was split at '.'
characters and it was assumed that the second part was the suffix.
Now, we look for the last dot and use that to determine the suffix.
This allows for strings that contain dots (not used now, though), and
seems, in general, to be clearer and more intuitive.
Complete rescan is incompatible with pruning, but rescan is optional on
our wallet key import RPCs. Import on use is very useful in some common
situations in conjunction with pruning, e.g. merchant payment tracking.
This reenables importprivkey/importaddress/importpubkey when rescan
is not used.
In the future we should consider changing the rescan argument to allow depth
or date to allow limited rescanning when compatible with the retained
block depth.
Lets nodes advertise that they offer bloom filter support explicitly.
The protocol version bump allows SPV nodes to assume that NODE_BLOOM is
set if NODE_NETWORK is set for pre-70011 nodes.
Also adds an option to turn bloom filter support off for nodes which
advertise a version number >= 70011. Nodes attempting to use bloom
filters on such protocol versions are banned, and a later upgade
should drop nodes of an older version which attempt to use bloom
filters.
Much code stolen from Peter Todd.
Implements BIP 111
`nMinPingUsecTime` was left uninitialized in CNode.
The correct initialization for a minimum-until-now is int64_t's max value, so initialize it to that.
Thanks @MarcoFalke for noticing.
d528025 Revert "rpc-tests: re-enable rpc-tests for Windows" (Wladimir J. van der Laan)
1e700c9 doc: update deps in build-unix.md after libevent (Wladimir J. van der Laan)
26c9b83 Move windows socket init to utility function (Wladimir J. van der Laan)
4be0b08 libevent: Windows reuseaddr workaround in depends (Cory Fields)
3a174cd Fix race condition between starting HTTP server thread and setting EventBase() (Wladimir J. van der Laan)
6d2bc22 Document options for new HTTP/RPC server in --help (Wladimir J. van der Laan)
be33f3f Implement RPCTimerHandler for Qt RPC console (Wladimir J. van der Laan)
57d85d9 doc: mention SSL support dropped for RPC in release notes (Wladimir J. van der Laan)
40b556d evhttpd implementation (Wladimir J. van der Laan)
ee2a42b tests: GET requests cannot have request body, use POST in rest.py (Wladimir J. van der Laan)
6e996d3 tests: fix qt payment test (Cory Fields)
3140ef9 build: build-system changes for libevent (Wladimir J. van der Laan)
a9af234 libevent: add depends (Cory Fields)
6a21dd5 Remove rpc_boostasiotocnetaddr test (Wladimir J. van der Laan)
8f9301c qa: Remove -rpckeepalive tests from httpbasics (Wladimir J. van der Laan)
51fcfc0 doc: remove documentation for rpcssl (Wladimir J. van der Laan)
The main effect is to exit processing for recently-rejected hashes,
in case they are pushed to us without prior advertisement. This
behavior was seen in the wild.
An additional effect is to do early checks for mempool or mapOrphan
existence. No logging or nDoS tracking is needed for failures of
these checks.
027de94 Use network group instead of CNetAddr in final pass to select node to disconnect (Patrick Strateman)
000c18a Fix comment (Patrick Strateman)
fed3094 Acquire cs_vNodes before changing refrence counts (Patrick Strateman)
69ee1aa CNodeRef copy constructor and assignment operator (Patrick Strateman)
dc81dd0 Return false early if vEvictionCandidates is empty (Patrick Strateman)
17f3533 Better support for nodes with non-standard nMaxConnections (Patrick Strateman)
1317cd1 RAII wrapper for CNode* (Patrick Strateman)
df23937 Add comments to AttemptToEvictConnection (Patrick Strateman)
a8f6e45 Remove redundant whiteconnections option (Patrick Strateman)
b105ba3 Prefer to disconnect peers in favor of whitelisted peers (Patrick Strateman)
2c70153 AttemptToEvictConnection (Patrick Strateman)
4bac601 Record nMinPingUsecTime (Patrick Strateman)
ae037b7 Refactor: Move failure conditions to the top of AcceptConnection (Patrick Strateman)
1ef4817 Refactor: Bail early in AcceptConnection (Patrick Strateman)
541a1dd Refactor: AcceptConnection (Patrick Strateman)
Split StartHTTPServer into InitHTTPServer and StartHTTPServer to give
clients a window to register their handlers without race conditions.
Thanks @ajweiss for figuring this out.
Implement RPCTimerHandler for Qt RPC console, so that `walletpassphrase`
works with GUI and `-server=0`.
Also simplify HTTPEvent-related code by using boost::function directly.
- *Replace usage of boost::asio with [libevent2](http://libevent.org/)*.
boost::asio is not part of C++11, so unlike other boost there is no
forwards-compatibility reason to stick with it. Together with #4738 (convert
json_spirit to UniValue), this rids Bitcoin Core of the worst offenders with
regard to compile-time slowness.
- *Replace spit-and-duct-tape http server with evhttp*. Front-end http handling
is handled by libevent, a work queue (with configurable depth and parallelism)
is used to handle application requests.
- *Wrap HTTP request in C++ class*; this makes the application code mostly
HTTP-server-neutral
- *Refactor RPC to move all http-specific code to a separate file*.
Theoreticaly this can allow building without HTTP server but with another RPC
backend, e.g. Qt's debug console (currently not implemented) or future RPC
mechanisms people may want to use.
- *HTTP dispatch mechanism*; services (e.g., RPC, REST) register which URL
paths they want to handle.
By using a proven, high-performance asynchronous networking library (also used
by Tor) and HTTP server, problems such as #5674, #5655, #344 should be avoided.
What works? bitcoind, bitcoin-cli, bitcoin-qt. Unit tests and RPC/REST tests
pass. The aim for now is everything but SSL support.
Configuration options:
- `-rpcthreads`: repurposed as "number of work handler threads". Still
defaults to 4.
- `-rpcworkqueue`: maximum depth of work queue. When this is reached, new
requests will return a 500 Internal Error.
- `-rpctimeout`: inactivity time, in seconds, after which to disconnect a
client.
- `-debug=http`: low-level http activity logging
If a user hasn't ready run autogen.sh, configure doesn't yet exist. Do the instructions seem to presume you have already built bitcoin? I don't think they do.
Would stifle beginners.
Update build-unix.md
When running the rpc tests in Wine, nodes often fail to listen on localhost
due to a stale socket from a previous run. This aligns the behavior with other
platforms.
Fix https://github.com/bitcoin/bitcoin/issues/6558. In particular, stop
parsing JSON after the first object or array is finished. Check that no
other garbage follows, and fail the parser if it does.
c5c1edf Fix spelling mistake in -> if. (Mark Friedenbach)
e846b2a Correct a possibly intentional pun that is nevertheless hard to read: "two times of nLockTime." What is meant is that there are two kinds, or categories of nLockTime. (Mark Friedenbach)
Since the introduction of the ScriptForMining callback, the mining
functions (setgenerate and generate) crash with an assertion failure
(due to a NULL pointer script returned) if the keypool is empty. Fix
this by giving a proper error.
d042854 SQUASH "Implement watchonly support in fundrawtransaction" (Matt Corallo)
428a898 SQUASH "Add have-pubkey distinction to ISMINE flags" (Matt Corallo)
6bdb474 Implement watchonly support in fundrawtransaction (Matt Corallo)
f5813bd Add logic to track pubkeys as watch-only, not just scripts (Matt Corallo)
d3354c5 Add have-pubkey distinction to ISMINE flags (Matt Corallo)
5c17059 Update importaddress help to push its use to script-only (Matt Corallo)
a1d7df3 Add importpubkey method to import a watch-only pubkey (Matt Corallo)
907a425 Add p2sh option to importaddress to import redeemScripts (Matt Corallo)
983d2d9 Split up importaddress into helper functions (Matt Corallo)
cfc3dd3 Also remove pay-2-pubkey from watch when adding a priv key (Matt Corallo)
Add error checking to CLevelDBWrapper for errors from
leveldb::DestroyDB(). Without it, if unlink() or DeleteFileW() fail to
delete files, they will fail silent. If they fail to delete any files,
CLevelDBWrapper will silently open and read the existing database.
Typically any permissions issues would be caught by leveldb as it churns
through many files as part of its compaction process, but it is
conceivable that this could cause problems on Windows with anti-virus
and indexing software.
7f1f8f5 Move mempool rejections to new debug category (Wladimir J. van der Laan)
66daed5 Add information to errors in ConnectBlock, CheckBlock (Wladimir J. van der Laan)
6cab808 Remove most logging from transaction validation (Wladimir J. van der Laan)
9003c7c Add function to convert CValidationState to a human-readable message (Wladimir J. van der Laan)
dc58258 Introduce REJECT_INTERNAL codes for local AcceptToMempool errors (Wladimir J. van der Laan)
fbf44e6 Add debug message to CValidationState for optional extra information (Wladimir J. van der Laan)
Move mempool rejections to debug category `mempoolrej`, to make it possible
to show them without enabling the entire category `mempool` which is
high volume.
Add detailed state information to the errors, as it is no longer being
logged downstream.
Also add the state information to mempool rejection debug message in
ProcessMessages.
Remove unnecessary direct logging in CheckTransaction,
AcceptToMemoryPool, CheckTxInputs, CScriptCheck::operator()
All status information should be returned in the CValidationState.
Relevant debug information is also added to the CValidationState using
the recently introduced debug message.
Do keep the "BUG! PLEASE REPORT THIS! ConnectInputs failed against MANDATORY but not STANDARD flags"
error as it is meant to appear as bug in the log.
Add status codes specific to AcceptToMempool procession of transactions.
These can never happen due to block validation, and must never be sent
over the P2P network. Add assertions where appropriate.
627468d Add support for data-based outputs (OP_RETURN) to bitcoin-tx. (Pavel Janík)
d707853 Add OP_RETURN support in createrawtransaction RPC call, add tests. (Pavel Janík)
9493803 Revert "Revert "Assert on probable deadlocks if the second lock isnt try_lock"" (Cory Fields)
605433f locks: don't lock cs_wallet before making rpc calls (Cory Fields)
- add static verifySize() function to PaymentServer and move the logging
on error into the function
- also use the new function in the unit test
- the function checks if the size is allowed as per BIP70
- remove an unneeded include of net.h in peertablemodel.cpp
- add const after size() in PeerTablePriv
- remove 2x unneeded else in functions
- replace a (int) typecast by (QVariant) to use Qt style
- remove unneeded include of peertablemodel.h from rpcconsole.cpp
Add a field `strDebugMessage` which can be passed to DoS or Invalid,
and queried using GetDebugMessage() to add extra troubleshooting
information to the validation state.
5922b67 Add assertion and cast before sending reject code (Wladimir J. van der Laan)
a651403 Add absurdly high fee message to validation state (for RPC propagation) (Shaul Kfir)
This gets rid of a warning. Add an assertion to make sure that the
reject code is in the correct range for the network protocol
(if it is outside the range it must be a bug)
7b79cbd limit total length of user agent comments (Pavol Rusnak)
557f8ea implement uacomment config parameter which can add comments to user agent as per BIP-0014 (Pavol Rusnak)
Previously various user-facing strings have used inconsistent currency units "BTC",
"btc" and "bitcoins". This adds a single constant and uses it for each reference to
the currency unit.
Also adds a description of the unit for --maxtxfee, and adds the missing "amount"
field description to the (deprecated) move RPC command.
Fixes#2007
This checks to see if the system clock appears to be bad and gives a
helpful error message. If the user's clock is set incorrectly, hopefully
they'll abort, fix it, and then save themselves a fruitless resync.
a8d0407 Move recentRejects initialization to top of InitBlockIndex (Wladimir J. van der Laan)
0847d9c Keep track of recently rejected transactions (Peter Todd)
d741371 Only use randomly created nonces in CRollingBloomFilter. (Pieter Wuille)
d2d7ee0 Make CRollingBloomFilter set nTweak for you (Peter Todd)
a3d65fe Reuse vector hashing code for uint256 (Pieter Wuille)
bbe4108 Add uint256 support to CRollingBloomFilter (Peter Todd)
c6455c7 doc: mention change to option parsing behavior in release notes (Wladimir J. van der Laan)
c38c49d Fix argument parsing oddity with -noX (Wladimir J. van der Laan)
Checking libcrypto for a function after we've already found a (possibly
different) libcrypto is not what we want to do here.
pkg-config might've found a cross lib while AC_CHECK_LIB may find a different
or native one.
Run a link-test against the lib that's already been found instead.
This avoids that premature return in the condition that a new chain is initialized
results in NULL pointer errors due to recentReject not being constructed.
Also add assertions where it is used.
Introduce a PlatformStyle to handle platform-specific customization of
the UI.
This replaces 'scicon', as well as #ifdefs to determine whether to place
icons on buttons.
The selected PlatformStyle defaults to the platform that the application
was compiled on, but can be overridden from the command line with
`-uiplatform=<x>`.
Also fixes the warning from #6328.
These changes decode valid SIGHASH types on signatures in assembly (asm) representations of scriptSig scripts.
This squashed commit incorporates substantial helpful feedback from jtimon, laanwj, and sipa.
Clean up the code in chainparams a bit more after the recent
refactorings. In particular, make sure the structure of the "RegTest"
params matches the structure of the other classes. This makes the code
clearer to read.
Also remove redundant values of the genesis block in always-specified
optional arguments and mark variable/argument as "const".
59b49cd Eliminate signed/unsigned comparison warning (Suhas Daftuar)
04b5d23 Replace sleep with syncing using pings (Suhas Daftuar)
6b1066f Ignore whitelisting during IBD for unrequested blocks. (Suhas Daftuar)
bfc30b3 Ignore unrequested blocks too far ahead of tip (Suhas Daftuar)
Nodes can have divergent policies on which transactions they will accept
and relay. This can cause you to repeatedly request and reject the same
tx after its inved to you from various peers which have accepted it.
Here we add rolling bloom filter to keep track of such rejections,
clearing the filter every time the chain tip changes.
Credit goes to Alex Morcos, who created the patch that this code is
based on.
Original code by Peter Todd. Refactored to not construct the
filter at startup time by Pieter Wuille.
While CBloomFilter is usually used with an explicitly set nTweak,
CRollingBloomFilter is only used internally. Requiring every caller to
set nTweak is error-prone and redundant; better to have the class handle
that for you with a high-quality randomness source.
Additionally when clearing the filter it makes sense to change nTweak as
well to recover from a bad setting, e.g. due to insufficient randomness
at initialization, so the clear() method is replaced by a reset() method
that sets a new, random, nTweak value.
As suggested by Greg Maxwell-- unit test to make sure a block
with a double-spend in it doesn't pass validation if half of
the double-spend is already in the memory pool (so full-blown
transaction validation is skipped) when the block is received.
`bitcoind -X -noX` ends up, unintuitively, with `X` set.
(for all boolean options X)
This result is due to the odd two-pass processing of arguments. This
patch fixes this oddity and simplifies the code at the same time.
9127e97 doc: Mention RPC strings for monetary amounts in release notes (Wladimir J. van der Laan)
7d226b7 [QA] add testcases for parsing strings as values (Jonas Schnelli)
614601b rpc: Accept strings in AmountFromValue (Wladimir J. van der Laan)
Accept strings containing decimal values, in addition to bare values.
Useful from JSON-RPC implementations where it's not possible to have
direct control over the text of numbers (e.g. where numbers are always
doubles), and it's still desired to send an exact value.
This would allow users to post JSON content with numbers encoded like
`{"value": "0.00000001"}` instead of `{"value": 0.00000001}` which some
php/python encoders wrap into 1e-8, or worse.
060b3d3 fixup: qt 5.5 snuck in another module that needs path hand-holding (Cory Fields)
ecd6a89 depends: make more qt flags explicit (Cory Fields)
ab67dd7 depends: bump to qt 5.5 (Cory Fields)
5189fe3 depends: split qt config options to separate lines (Jacob Welsh)
fe997df build: fix building against qt5.4/5.5 (Cory Fields)
ec249d4 util: use locale-independent parsing in ParseDouble (Wladimir J. van der Laan)
7650449 univalue: Avoid unnecessary roundtrip through double for numbers (Wladimir J. van der Laan)
e061e27 rpc: Make ValueFromAmount always return 8 decimals (Wladimir J. van der Laan)
a794284 locking: add a quick example of GUARDED_BY (Cory Fields)
2b890dd locking: fix a few small issues uncovered by -Wthread-safety (Cory Fields)
cd27bba locking: teach Clang's -Wthread-safety to cope with our scoped lock macros (Cory Fields)
Handle the case where no chain tip is available, in InvalidChainFound(). This fixes a null pointer deference when running unit tests, if the genesis block or block validation code is broken.
This indicates that, eg, we have a public key for a key which may
be used as a pay-to-pubkey-hash. It generally means that we can
create a valid scriptSig except for missing private key(s) with
which to create signatures.
Since unspendable outputs can't be spent, there is no threshold at which it would be uneconomic to spend them.
This primarily targets transaction outputs with `OP_RETURN`.
---
Initially based on:
commit 9cf0ae26350033d43d5dd3c95054c0d1b1641eda
Author: zathras-crypto <zathrasc@gmail.com>
Date: Wed Mar 25 02:04:02 2015 -0700
Changes:
- cherry-picked on top of bitcoin:master
- added RPC test for fundrawtransaction
JSON makes no distinction between numbers and reals, and our code
doesn't need to do so either.
This removes VREAL, as well as its specific post-processing in
`UniValue::write`. Non-monetary amounts do not need to be forcibly
formatted with 8 decimals, so the extra roundtrip was unnecessary
(and potentially loses precision).
This is the format that was always returned to JSON clients.
The difference was not noticed before, because VREAL values
are post-processed by univalue.
By implementing the functionality directly it breaks the dependency
of rpcserver on utilmoneystr. FormatMoney is now only used for debugging
purposes.
To test, port over the formatting tests from util_tests.cpp to
rpc_tests.cpp.
Three changes to how configure --enable-debug behaves:
1. Preserve user-passed CXXFLAGS/CFLAGS
2. Compile with -DDEBUG_LOCKORDER
3. Add -DDEBUG -DDEBUG_LOCKORDER to CPPFLAGS (since they are preprocessor options)
It is unreasonable to ask to change the global package configuration
just to build a package. Not only that, this is potentially harmful to the system.
Also do a few punctuation fixes in REST-interface.md.
QT_NO_KEYWORDS prevents Qt from defining the `foreach`, `signals`,
`slots` and `emit` macros.
Avoid overlap between Qt macros and boost - for example #undef hackiness
in #6421.
0937290 doc: mention RPC random cookie authentication in release notes (Wladimir J. van der Laan)
71cbeaa rpc: Implement random-cookie based authentication (Wladimir J. van der Laan)
When no `-rpcpassword` is specified, use a special 'cookie' file for
authentication. This file is generated with random content when the
daemon starts, and deleted when it exits. Read access to this file
controls who can access through RPC. By default this file is stored in
the data directory but it be overriden with `-rpccookiefile`.
This is similar to Tor CookieAuthentication: see
https://www.torproject.org/docs/tor-manual.html.en
Alternative to #6258. Like that pull, this allows running bitcoind
without any manual configuration. However, daemons should ideally never write to
their configuration files, so I prefer this solution.
This removes the `conflictedbalance.sh` test as well, but that test has
been broken for a long time and isn't part of any scripts.
What it does is, IMO, sufficiently tested by other tests.
9da8fc8 [QA] remove rawtransactions.py from the extended test list (Jonas Schnelli)
6ed38b0 [QA] fix possible reorg issue in rawtransaction.py/fundrawtransaction.py RPC test (Jonas Schnelli)
Add a function `ParseFixedPoint` that parses numbers according
to the JSON number specification and returns a 64-bit integer.
Then this in `AmountFromValue`, rather than `ParseMoney`.
Also add lots of tests (thanks to @jonasschnelli for some of them).
Fixes issue #6297.
I've never liked the chain-specific exception to having to set a
password. It gives issues with #6388 which makes it valid to
set no password in every case (as it enables random cookie authentication).
This pull removes the flag, so that all chains are regarded the same.
It also removes the username==password test, which doesn't provide any
substantial extra security.
In txn_clone.py, non-essential test transaction tx2 was asserted
to be unconfirmed, but would occasionally confirm depending on
network behavior. Fix by explicitly sharing with miner and
checking for 1 confirmation.
Reduce required conflict tests from 4 to 2, by moving one invocation
each of txn_clone.py and txn_doublespend.py to the extented test
section. This saves about 15 seconds per test run for me.
This allows users to specify, e.g. raise, the default timeout of 60
seconds. Some bitcoind instances, especially long running ones on slow
hardware, require a higher timeout for a clean shut down.
Also add a comment to bitcoind.openrc's 'retry=', since it is not
obvious from the variable name what it does.
Prevents stomping on debug logs in datadirs that are locked by other
instances and lost parameter interaction messages that can get wiped by
ShrinkDebugFile().
The log is now opened explicitly and all emitted messages are buffered
until this open occurs. The version message and log cut have also been
moved to the earliest possible sensible location.
Four cases included:
* The CLTV operand type mismatches the tx locktime. In the script it is
1 (interpreted as block height), but in the tx is 500000000
(interpreted as date)
* The stack is empty when executing OP_CLTV
* The tx is final by having only one input with MAX_INT sequence number
* The operand for CLTV is negative (after OP_0 OP_1 OP_SUB)
No longer relevant after #5957. This hack existed because of another
hack where the numthreads parameter, on regtest, doubled as how many
blocks to generate.
stephenhutchings commented 3 Jul 2015, 6:35 GMT:
> Hi Luke, happy for these to be distributed under the terms of the MIT licence.
> Let me know if you need anything further from me.
177a0e4 Adding CSubNet constructor over a single CNetAddr (Jonas Schnelli)
409bccf use CBanEntry as object container for banned nodes (Jonas Schnelli)
dfa174c CAddrDB/CBanDB: change filesize variables from int to uint64_t (Jonas Schnelli)
f581d3d banlist.dat: store banlist on disk (Jonas Schnelli)
CTransAction::IsEquivalentTo was introduced in #5881.
This functionality is only useful to the wallet, and should never have
been added to the primitive transaction type.
72b9452 When processing RPC commands during warmup phase, parse the request object before returning an error so that id value can be used in the response. (Forrest Voight)
request object before returning an error so that id value can
be used in the response.
Prior to this commit, RPC commands sent during Bitcoin's
warmup/startup phase were responded to with a JSON-RPC error
with an id of null, which violated the JSON-RPC 2.0 spec:
id: This member is REQUIRED. It MUST be the same as the value
of the id member in the Request Object. If there was an error
in detecting the id in the Request object (e.g. Parse
error/Invalid Request), it MUST be Null.
To determine the default for `-par`, the number of script verification
threads, use [boost::thread::physical_concurrency()](http://www.boost.org/doc/libs/1_58_0/doc/html/thread/thread_management.html#thread.thread_management.thread.physical_concurrency)
which counts only physical cores, not virtual cores.
Virtual cores are roughly a set of cached registers to avoid context
switches while threading, they cannot actually perform work, so spawning
a verification thread for them could even reduce efficiency and will put
undue load on the system.
Should fix issue #6358, as well as some other reported system overload
issues, especially on Intel processors.
The function was only introduced in boost 1.56, so provide a utility
function `GetNumCores` to fall back for older Boost versions.
This is an ideal version of what the release process should look like,
making it more consistent with the OS X process. Some of the changes
described here would need to be made in the descriptors, which is somewhat
beyond what I would feel comfortable doing, not really understanding the signature process in depth.
[skip ci]
4f40716 test: Move reindex test to standard tests (Wladimir J. van der Laan)
36c97b4 Bugfix: Don't check the genesis block header before accepting it (Jorge Timón)
ffd75ad Enable CHECKLOCKTIMEVERIFY as a standard script verify flag (Peter Todd)
bc60b2b Replace NOP2 with CHECKLOCKTIMEVERIFY (BIP65) (Peter Todd)
48e9c57 Move LOCKTIME_THRESHOLD to src/script/script.h (Peter Todd)
99088d6 Make CScriptNum() take nMaxNumSize as an argument (Peter Todd)
b932953 Hardcoded seeds update June 2015 (Wladimir J. van der Laan)
884454a contrib: Add port parsing to makeseeds.py (Wladimir J. van der Laan)
ccd4369 contrib: Improvements to hardcoded seeds scripts (Wladimir J. van der Laan)
Allow for non-8333 nodes to appear in the internal seeds. This will
allow bitcoind to bypas a filter on 8333. This also makes it possible to
use the same tool for e.g. testnet.
As hosts with multiple nodes per IP are likely abusive, add a filter to
remove these (the ASN check will take care of them for IPv4, but not
IPv6 or onion).
- Moved all seed related scripts to contrib/seeds for consistency
- Updated `makeseeds.py` to handle IPv6 and onions, fix regular
expression for recent Bitcoin Core versions
- Fixed a bug in `generate-seeds.py` with regard to IPv6 parsing
New, undocumented-on-purpose -mocktime=timestamp command-line
argument to startup with mocktime set. Needed because
time-related blockchain sanity checks are done on startup, before a
test has a chance to make a setmocktime RPC call.
And changed the setmocktime RPC call so calling it will not result in
currently connected peers being disconnected due to inactivity timeouts.
Transactions that fail CLTV verification will be rejected from the
mempool, making it easy to test the feature. However blocks containing
"invalid" CLTV-using transactions will still be accepted; this is *not*
the soft-fork required to actually enable CLTV for production use.
<nLockTime> CHECKLOCKTIMEVERIFY -> <nLockTime>
Fails if tx.nLockTime < nLockTime, allowing the funds in a txout to be
locked until some block height or block time in the future is reached.
Only the logic and unittests are implemented; this commit does not have
any actual soft-fork logic in it.
Thanks to Pieter Wuille for rebase.
Credit goes to Gregory Maxwell for the suggestion of comparing the
argument against the transaction nLockTime rather than the current
time/blockheight directly.
Now that the off-by-one error w/nLockTime txs issue has been fixed by
87550eef (75a4d512 in the 0.11 branch) we can make the anti-fee-sniping
protection create transactions with nLockTime set such that they're only
valid in the next block, rather than an earlier block.
There was also a concern about poor propagation, however testing with
transactions with nLockTime = GetAdjustedTime()+1 as a proxy for
nLockTime propagation, as well as a few transactions sent the moment
blocks were received, has turned up no detectable issues with
propagation. If you have a block at a given height you certainly have at
least one peer with that block who will accept the transaction. That
peer will certainly have other peers who will accept it, and soon
essentially the whole network has the transaction. In particular, if a
node recives a transaction that it rejects due to the tx being
non-final, it will be accepted again later as it winds its way around
the network.
This should fix the spurious comparison tool failures.
See discussion here: https://github.com/bitcoin/bitcoin/pull/6305
The race fix was cherry-picked on top of the version we're currently using, so
it should be functionally identical otherwise.
This should be functionally identical to what's in place now. It was built from
be0eef7744
That commit is the same as this pruned commit in TheBlueMatt's repo:
https://github.com/TheBlueMatt/bitcoinj/commit/0f7b5d8
Now we'll be able to trust the line numbers in the stack traces.
When responding to a getblocks message, only return inv's as
long as we HAVE_DATA for blocks in the chain, and only for blocks
that we aren't likely to delete in the near future.
- fixes#3136
- the problem is related to Boost path and a static initialized internal
pointer
- using a std::string in CDBEnv::EnvShutdown() prevents the problem
- this removes the boost::filesystem::path path field from CDBEnv
26a639e remove using namespace std from addrman.cpp (Philip Kaufmann)
40c592a make CAddrMan::size() return the correct type of size_t (Philip Kaufmann)
For leveldb "An iterator operates on a snapshot of the database taken
when the iterator is created". This means that it is unnecessary to
lock out other threads while computing statistics, and neither to hold
cs_main for the whole time. Let the thread run free.
- rpcwallet: No need to lock twice here
- openssl: Clang doesn't understand selective lock/unlock here. Ignore it.
- CNode: Fix a legitimate (though very unlikely) locking bug.
This allows us to use function/variable/class attributes to specify locking
requisites, allowing problems to be detected during static analysis.
This works perfectly with newer Clang versions (tested with 3.3-3.7). For older
versions (tested 3.2), it compiles fine but spews lots of false-positives.
Make it possible to opt-out of the centralized alert system by providing
an option `-noalerts` or `-alerts=0`. The default remains unchanged.
This is a gentler form of #6260, in which I went a bit overboard by
removing the alert system completely.
I intend to add this to the GUI options in another pull after this.
This sets aside a number of connection slots for whitelisted peers,
useful for ensuring your local users and miners can always get in,
even if your limit on inbound connections has already been reached.
Boost assumes variadic templates are always available in GCC 4.4+, but
they aren't since we don't build with -std=c++11.
This applies the patch that fixed the issue in boost 1.57:
eec8085549
See also: https://svn.boost.org/trac/boost/ticket/10500
Chance "getbalance *" not to use IsTrusted. The method and result
now match the "getbalance <specific-account>" behavior. In
particular, "getbalance * 0" now works.
Also fixed a comment -- GetGalance has required 1 confirmation
for many years, and the default "getbalance *" behavior matches
that.
Simplify and make the code in AppInit2 more clear.
This provides a straightforward flow, gets rid of .count() (which makes
it possible to override an earlier provided proxy option to nothing), as
well as comments the different cases.
Univalue's parsing of \u escape sequences did not handle NUL characters
correctly. They were, effectively, dropped. The extended test-case
fails with the old code, and is fixed with this patch.
Rather than fetching a signature.tar.gz from somewhere on the net, instruct
Gitian to use a signature from a tag in the bitcoin-detached-sigs repository
which corresponds to the tag of the release being built.
This changes detached-sig-apply.sh to take a dirname rather than a tarball as
an argument, though detached-sig-create.sh still outputs a tarball for
convenience.
Do not translate -help-debug options, Many technical terms, and
only a very small audience, so is unnecessary stress to translators.
Brings the code up to date with translation string policy in
`doc/translation_strings_policy.md`.
Also remove no-longer-relevant "In this mode -genproclimit controls how
many blocks are generated immediately." (as of #5957) from regtest help.
7d8ffac Changes necessary now that zero values accepted in AmountFromValue (Wladimir J. van der Laan)
a04bdef Get rid of fPlus argument to FormatMoney (Wladimir J. van der Laan)
4b4b9a8 Don't go through double in AmountFromValue and ValueFromAmount (Wladimir J. van der Laan)
The partition checking code was using chainActive timestamps
to detect partitioning; with headers-first syncing, it should use
(and with this pull request, does use) pIndexBestHeader timestamps.
Fixes issue #6251
- Add an accept test for zero amounts, and a reject test for negative
amounts
- Remove ugly hack in `settxfee` that is no longer necessary
- Do explicit zero checks in wallet RPC functions
- Don't add a check for zero amounts in `createrawtransaction` - this
could be seen as a feature
My prime gripe with JSON spirit was that monetary values still had to be
converted from and to floating point which can cause deviations (see #3759
and https://bitcoin.stackexchange.com/questions/22716/bitcoind-sendfrom-round-amount-error).
As UniValue stores internal values as strings, this is no longer
necessary. This avoids risky double-to-integer and integer-to-double
conversions completely, and results in more elegant code to boot.
This prevents an edge case where a block downloaded and pruned
in-between successive calls to FindNextBlocksToDownload could
cause the block to be unnecessarily re-requested.
44c7474 univalue: add type check unit tests (Jonas Schnelli)
c023092 univalue: add strict type checking (Wladimir J. van der Laan)
7e98a3c util: Add ParseInt64 and ParseDouble functions (Wladimir J. van der Laan)
043df2b Simplify RPCclient, adapt json_parse_error test (Wladimir J. van der Laan)
519eede fix univalue json parse tests (Jonas Schnelli)
c7fbbc7 fix missing univalue types during constructing (Jonas Schnelli)
8f7e4ab fix rpc batching univalue issue (Jonas Schnelli)
9a8897f Remove JSON Spirit wrapper, remove JSON Spirit leftovers (Jonas Schnelli)
3df0411 remove JSON Spirit UniValue wrapper (Jonas Schnelli)
1f263c8 fix rpc unit test, plain numbers are not JSON compatible object (Jonas Schnelli)
e04d9c2 univalue: correct bool support (Jonas Schnelli)
0c5b2cf univalue: add support for real, fix percision and make it json_spirit compatible (Jonas Schnelli)
21c10de special threatment for null,true,false because they are non valid json (Jonas Schnelli)
6c7bee0 expicit set UniValue type to avoid empty values (Jonas Schnelli)
53b4671 extend conversion to UniValue (Jonas Schnelli)
15982a8 Convert tree to using univalue. Eliminate all json_spirit uses. (Jeff Garzik)
5e3060c UniValue: export NullUniValue global constant (Jeff Garzik)
efc7883 UniValue: prefer .size() to .count(), to harmonize w/ existing tree (Jeff Garzik)
Strict parsing functions for other numeric types.
- ParseInt64 analogous to ParseInt32, but for 64-bit values.
- ParseDouble for doubles.
- Make all three Parse* functions more strict (e.g. reject whitespace on
the inside)
Also add tests.
- implement find_value() function for UniValue
- replace all Array/Value/Object types with UniValues, remove JSON Spirit to UniValue wrapper
- remove JSON Spirit sources
In some corner cases, it may be possible for recent blocks to end up in
the same block file as much older blocks. Previously, the pruning code
would stop looking for files to remove upon first encountering a file
containing a block that cannot be pruned, now it will keep looking for
candidate files until the target is met and all other criteria are
satisfied.
This can result in a noncontiguous set of block files (by number) on
disk, which is fine except for during some reindex corner cases, so
make reindex preparation smarter such that we keep the data we can
actually use and throw away the rest. This allows pruning to work
correctly while downloading any blocks needed during the reindex.
960e994 gitian: Bump cache dir for current master (Cory Fields)
be65628 gitian: bump faketime to something more recent (Cory Fields)
c3cdd7b osx: set min version to 10.7 for 0.11+ (Cory Fields)
Change `read_string` to fail when not the entire input has been
consumed. This avoids unexpected, even dangerous behavior (fixes#6223).
The new JSON parser adapted in #6121 also solves this problem so in
master this is a temporary fix, but should be backported to older releases.
Also adds tests for the new behavior.
If/when CTransaction::CURRENT_VERSION is incremented, this will break CChainParams and the miner tests. This fix sets the transaction version explicitly where we depend on the hash value (genesis block, proof of work checks).
aa41bc8 Update help message to match the #4219 change (lpescher)
f60bb5e Update documentation to match the #4219 change (lpescher)
cb87386 Make command line option to show all debugging consistent with similar options (lpescher)
Until secp256k1 is used for verification there is no reason for Bitcoin
Core's secp256k1 to link against gmp, even if available. Pass a flag to
configure to override the bignum implementation.
This fixes a crash at runtime on ppc64 reported by @gmaxwell.
Add information about further notable changes:
- Big endian support
- Memory usage optimization
- Disable wallet transaction broadcast
- Stream isolation for Tor
Under some circumstances it is possible for there to be a significant,
discontinuous jump in a node's clock value. On mining nodes, this can
result in block templates which are no longer valid due to time-based
nLockTime constraints. UpdateTime() is modified so that it will never
decrease a block's nLockTime, thereby preventing such invalidations.
Previously due to an off-by-one error the wallet ignored
nLockTime-by-height transactions that would be valid in the next block
even though they are accepted into the mempool. The transactions
wouldn't show up until confirmed, nor would they be included in the
unconfirmed balance. Similar to the mempool behavior fix in 665bdd3b,
the wallet code was calling IsFinalTx() directly without taking into
account the fact that doing so tells you if the transaction could have
been mined in the *current* block, rather than the next block.
To fix this we strip IsFinalTx() of non-consensus-critical
functionality, removing the default arguments, and add CheckFinalTx() to
check if a transaction will be final in the next block.
Fix two CSubNet constructor problems:
- The use of `/x` where 8 does not divide x was broken, due to a
bit-order issue
- The use of e.g. `1.2.3.4/24` where the netmasked bits in the network
are not 0 was broken. Fix this by explicitly normalizing the netwok
according to the bitmask.
Also add tests for these cases.
Fixes#6179. Thanks to @jonasschnelli for reporting and initial fix.
Don't clear `stopRequested` and `stopWhenEmpty` at the top of
`serviceQueue`, as this results in a race condition: on systems under
heavy load, some of the threads only get scheduled on the CPU when the
other threads have already finished their work. This causes the flags to
be cleared post-hoc and thus those threads to wait forever.
The potential drawback of this change is that the scheduler cannot be
restarted after being stopped (an explicit reset would be needed), but
we don't use this functionality anyway.
Most people expect a value of 1 to enable all for command line arguments.
However to do this for the -debug option you must type "-debug=".
This has been changed to allow "-debug=1" as well as "-debug=" to
enable all debug logging
To protect privacy, do not use UPNP when a proxy is set. The user may
still specify -listen=1 to listen locally (for a hidden service), so
don't rely on this happening through -listen.
Fixes#2927.
2457dc4 Change default nTxConfirmTarget to 2 (Alex Morcos)
77ed59d wallet: Introduce constant for `-txconfirmtarget` default (Wladimir J. van der Laan)
On a busy or slow system, the CScheduler unit test could fail because it
assumed all threads would be done after a couple of milliseconds.
Replace the hard-coded sleep with CScheduler stop() method that
will cleanly exit the servicing threads when all tasks are completely
finished.
Previously this was cleared only after UnlinkPrunedFiles, but it should really be cleared after FindFilesToPrune, regardless of whether there are any files to be pruned.
86a5f4b Relocate calls to CheckDiskSpace (Alex Morcos)
67708ac Write block index more frequently than cache flushes (Pieter Wuille)
b3ed423 Cache tweak and logging improvements (Pieter Wuille)
fc684ad Use accurate memory for flushing decisions (Pieter Wuille)
046392d Keep track of memory usage in CCoinsViewCache (Pieter Wuille)
540629c Add memusage.h (Pieter Wuille)
8f0947b Increase timeouts in pruning.py and modify warning language. (Alex Morcos)
b89f307 Fix incorrect variable name in FindFilesToPrune (Suhas Daftuar)
Documentation more readable when viewed on Github.
Some extra changes by @laanwj:
- Make README.usage the default README. This is more convenient from a
user perspective. Link to other documentation in this default README
- Add list of popular targets for cross compilation, change default to
Win64 instead of Win32
This assertion will occur any time that the client quits without
shutting down properly due to an error condition. As the user will
report this error instead of the error that was the root cause, it is
better to remove it.
Create a monitoring task that counts how many blocks have been found in the last four hours.
If very few or too many have been found, an alert is triggered.
"Very few" and "too many" are set based on a false positive rate of once every fifty years of constant running with constant hashing power, which works out to getting 5 or fewer or 48 or more blocks in four hours (instead of the average of 24).
Only one alert per day is triggered, so if you get disconnected from the network (or are being Sybil'ed) -alertnotify will be triggered after 3.5 hours but you won't get another -alertnotify for 24 hours.
Tested with a new unit test and by running on the main network with -debug=partitioncheck
Run test/test_bitcoin --log_level=message to see the alert messages:
WARNING: check your network connection, 3 blocks received in the last 4 hours (24 expected)
WARNING: abnormally high number of blocks generated, 60 blocks received in the last 4 hours (24 expected)
The -debug=partitioncheck debug.log messages look like:
ThreadPartitionCheck : Found 22 blocks in the last 4 hours
ThreadPartitionCheck : likelihood: 0.0777702
ca5f688 [QT] don't colorize icons on win and mac (Jonas Schnelli)
7247d10 [QT] use alert icon with tooltip insted of "(out of sync)" text (Jonas Schnelli)
51c7c70 [QT] remove frame to avoid double-frame situation in sendcoinsentry.ui (Jonas Schnelli)
2a6b844 [QT] change transaction amount and height in overview page (Jonas Schnelli)
In some cases (Travis), sources and build caches may be moved around in-between
builds, and we can't necessarily trust that everything is still intact.
This introduces pre-build checks that verify against stashed checksums.
Note that this will cause all sources to be re-downloaded, since cached sources
weren't trustworthy before this.
Instead of only checking height to decide whether to disable script checks,
actually check whether a block is an ancestor of a checkpoint, up to which
headers have been validated. This means that we don't have to prevent
accepting a side branch anymore - it will be safe, just less fast to
do.
We still need to prevent being fed a multitude of low-difficulty headers
filling up our memory. The mechanism for that is unchanged for now: once
a checkpoint is reached with headers, no headers chain branching off before
that point are allowed anymore.
This class groups transactions that have been confirmed in blocks into buckets, based on either their fee or their priority. Then for each bucket, the class calculates what percentage of the transactions were confirmed within various numbers of blocks. It does this by keeping an exponentially decaying moving history for each bucket and confirm block count of the percentage of transactions in that bucket that were confirmed within that number of blocks.
-Eliminate txs which didn't have all inputs available at entry from fee/pri calcs
-Add dynamic breakpoints and tracking of confirmation delays in mempool transactions
-Remove old CMinerPolicyEstimator and CBlockAverage code
-New smartfees.py
-Pass a flag to the estimation code, using IsInitialBlockDownload as a proxy for when we are still catching up and we shouldn't be counting how many blocks it takes for transactions to be included.
-Add a policyestimator unit test
We don't want to erase orphans that still have missing inputs, they should still be tracked as orphans. Also, the transaction thats being accepted can't be an orphan otherwise it would have previously been accepted, so doesn't need to be added to the erase queue.
When the internal miner is enabled at the start of a new node, there
is an near instant assert in TestBlockValidity because its attempting
to mine a block before the top checkpoint.
Also avoids a data race around vNodes.
Does what the old txnmall.sh test did.
Creates an equivalent malleated clone and tests that SyncMetaData
syncs the accounting effects from the original transaction to the
confirmed clone.
03c5687 appropriate response when trying to get a block in pruned mode (Jonas Schnelli)
1b2e555 add autoprune information to RPC "getblockchaininfo" (Jonas Schnelli)
a8cdaf5 checkpoints: move the checkpoints enable boolean into main (Cory Fields)
11982d3 checkpoints: Decouple checkpoints from Params (Cory Fields)
6996823 checkpoints: make checkpoints a member of CChainParams (Cory Fields)
9f13a10 checkpoints: store mapCheckpoints in CCheckpointData rather than a pointer (Cory Fields)
a71ab10 QA: add RPC tests for error reporting of "signrawtransaction" (dexX7)
8ac2a4e RPC: show script verification errors in "signrawtransaction" result (dexX7)
Tests error reporting of transaction signing via RPC call "signrawtransaction".
Expected results:
Test 1: create and sign a valid raw transaction with one input:
- 1) The transaction has a complete set of signatures
- 2) No script verification error occurred
Test 2: create and sign a raw transaction with one valid, one invalid and one missing input script:
- 3) The transaction has no complete set of signatures
- 4) Two script verification errors occurred
- 5) Script verification errors have certain properties ("txid", "vout", "scriptSig", "sequence", "error")
- 6) The verification errors refer to the invalid (vin 1) and missing input (vin 2)
If there are any script verification errors, when using "signrawtransaction", they are shown in the RPC result:
```
// ...
Result:
{
"hex" : "value", (string) The hex-encoded raw transaction with signature(s)
"complete" : true|false, (boolean) If the transaction has a complete set of signatures
"errors" : [ (json array of objects) Script verification errors (if there are any)
{
"txid" : "hash", (string) The hash of the referenced, previous transaction
"vout" : n, (numeric) The index of the output to spent and used as input
"scriptSig" : "hex", (string) The hex-encoded signature script
"sequence" : n, (numeric) Script sequence number
"error" : "text" (string) Verification or signing error related to the input
}
,...
]
}
```
Connecting the chain can take quite a while.
All the while it is still showing `Loading wallet...`.
Add an init message to inform the user what is happening.
libsecp256k1's API changed, so update key.cpp to use it.
Libsecp256k1 now has explicit context objects, which makes it completely thread-safe.
In turn, keep an explicit context object in key.cpp, which is explicitly initialized
destroyed. This is not really pretty now, but it's more efficient than the static
initialized object in key.cpp (which made for example bitcoin-tx slow, as for most of
its calls, libsecp256k1 wasn't actually needed).
This also brings in the new blinding support in libsecp256k1. By passing in a random
seed, temporary variables during the elliptic curve computations are altered, in such
a way that if an attacker does not know the blind, observing the internal operations
leaks less information about the keys used. This was implemented by Greg Maxwell.
bba2216 RPC test for "#5418 Report missing inputs in sendrawtransaction" (Jonas Schnelli)
de8e801 Report missing inputs in sendrawtransaction (Pieter Wuille)
2a22d4b Fix comptool send_message call when MAX_INV_SZ reached (Suhas Daftuar)
574db48 Fix potential race conditions in p2p testing framework (Suhas Daftuar)
5487975 Don't run invalidblockrequest.py in travis until race condition is fixed (Suhas Daftuar)
ef32817 Fix mininode disconnections to work with select (Suhas Daftuar)
Compute the change directly as difference between the "requested" and
the actual value returned by SelectCoins. This removes a duplication of
the fee logic code.
Previously, each NodeConnCB had its own lock to synchronize data structures
used by the testing thread and the networking thread, and NodeConn provided a
separate additional lock for synchronizing access to each send buffer. This
commit replaces those locks with a single global lock (mininode_lock) that we
use to synchronize access to all data structures shared by the two threads.
Updates comptool and maxblocksinflight to use the new synchronization
semantics, eliminating previous race conditions within comptool, and re-enables
invalidblockrequest.py in travis.
f46a680 Better mruset unit test (Pieter Wuille)
d4d5022 Use ring buffer of set iterators instead of deque of copies in mruset (Pieter Wuille)
d81cff3 Replace mruset setAddrKnown with CRollingBloomFilter addrKnown (Gavin Andresen)
69a5f8b Rolling bloom filter class (Gavin Andresen)
Use a probabilistic bloom filter to keep track of which addresses
we think we have given our peers, instead of a list.
This uses much less memory, at the cost of sometimes failing to
relay an address to a peer-- worst case if the bloom filter happens
to be as full as it gets, 1-in-1,000.
Measured memory usage of a full mruset setAddrKnown: 650Kbytes
Constant memory usage of CRollingBloomFilter addrKnown: 37Kbytes.
This will also help heap fragmentation, because the 37K of storage
is allocated when a CNode is created (when a connection to a peer
is established) and then there is no per-item-remembered memory
allocation.
I plan on testing by restarting a full node with an empty peers.dat,
running a while with -debug=addrman and -debug=net, and making sure
that the 'addr' message traffic out is reasonable.
(suggestions for better tests welcome)
For when you need to keep track of the last N items
you've seen, and can tolerate some false-positives.
Rebased-by: Pieter Wuille <pieter.wuille@gmail.com>
2703412 Fix default binary in p2p tests to use environment variable (Suhas Daftuar)
29bff0e Add some travis debugging for python scripts (Suhas Daftuar)
d76412b Add script manipulation tools for use in mininode testing framework (Suhas Daftuar)
b93974c Add comparison tool test runner, built on mininode (Suhas Daftuar)
6c1d1ba Python p2p testing framework (Suhas Daftuar)
script.py is modified from the code in python-bitcoinlib, and provides tools
for manipulating and creating CScript objects.
bignum.py is a dependency for script.py
script_test.py is an example test that uses the script tools for running a test
that compares the behavior of two nodes, in a comptool- style test, for each of
the test cases in the bitcoin unit test script files, script_valid.json and
script_invalid.json. (This test is very slow to run, but is a proof of concept
for how we can write tests to compare consensus-critical behavior between
different versions of bitcoind.)
bipdersig-p2p.py is another example test in the comptool framework, which tests
deployment of BIP DERSIG for a single node. It uses the script.py tools for
manipulating signatures to be non-DER compliant.
comptool.py creates a tool for running a test suite on top of the mininode p2p
framework. It supports two types of tests: those for which we expect certain
behavior (acceptance or rejection of a block or transaction) and those for
which we are just comparing that the behavior of 2 or more nodes is the same.
blockstore.py defines BlockStore and TxStore, which provide db-backed maps
between block/tx hashes and the corresponding block or tx.
blocktools.py defines utility functions for creating and manipulating blocks
and transactions.
invalidblockrequest.py is an example test in the comptool framework, which
tests the behavior of a single node when sent two different types of invalid
blocks (a block with a duplicated transaction and a block with a bad coinbase
value).
mininode.py provides a framework for connecting to a bitcoin node over the p2p
network. NodeConn is the main object that manages connectivity to a node and
provides callbacks; the interface for those callbacks is defined by NodeConnCB.
Defined also are all data structures from bitcoin core that pass on the network
(CBlock, CTransaction, etc), along with de-/serialization functions.
maxblocksinflight.py is an example test using this framework that tests whether
a node is limiting the maximum number of in-flight block requests.
This also adds support to util.py for specifying the binary to use when
starting nodes (for tests that compare the behavior of different bitcoind
versions), and adds maxblocksinflight.py to the pull tester.
1ec900a Remove broken+useless lock/unlock log prints (Matt Corallo)
352ed22 Add merkle blocks test (Matt Corallo)
59ed61b Add RPC call to generate and verify merkle blocks (Matt Corallo)
30da90d Add CMerkleBlock constructor for tx set + block and an empty one (Matt Corallo)
This commit adds several tests to the script_invalid.json data which
exercise some edge conditions that are not currently being tested.
These are mainly being added to cover several cases a branch coverage
analysis of btcd showed are not already being covered, but given more
tests of edge conditions are always a good thing, I'm contributing
them upstream.
The test which is intended to prove that the script engine is properly
rejecting non-minimally encoded PUSHDATA4 data is using the wrong
opcode and value. The test is using 0x4f, which is OP_1NEGATE instead
of the desired 0x4e, which is OP_PUSHDATA4. Further, the push of data
is intended to be 256 bytes, but the value the test is using is
0x00100000 (4096), instead of the desired 0x00010000 (256).
This commit fixes both issues.
This was found while examining the branch coverage in btcd against only
these tests to help find missing branch coverage.
This adds a -prune=N option to bitcoind, which if set to N>0 will enable block
file pruning. When pruning is enabled, block and undo files will be deleted to
try to keep total space used by those files to below the prune target (N, in
MB) specified by the user, subject to some constraints:
- The last 288 blocks on the main chain are always kept (MIN_BLOCKS_TO_KEEP),
- N must be at least 550MB (chosen as a value for the target that could
reasonably be met, with some assumptions about block sizes, orphan rates,
etc; see comment in main.h),
- No blocks are pruned until chainActive is at least 100,000 blocks long (on
mainnet; defined separately for mainnet, testnet, and regtest in chainparams
as nPruneAfterHeight).
This unsets NODE_NETWORK if pruning is enabled.
Also included is an RPC test for pruning (pruning.py).
Thanks to @rdponticelli for earlier work on this feature; this is based in
part off that work.
has parts of @mhearn #4351
* allows querying the utxos over REST
* same binary input and outputs as mentioned in Bip64
* input format = output format
* various rpc/rest regtests
Ever since #5957 there has been the problem that older RPC test cases
(as can be found plenty in open pulls) use setgenerate() on regtest,
assuming a different interpretation of the arguments. Directly
generating a number of blocks has been split off into a new method
`generate` - however using `setgenerate` with the previous arguments will
result in spawning an unreasonable number of threads, and well, simply
not work as expected without clear indication of the error.
Add an error to point the user at the right method.
It's reasonable that automatic coin selection will not pick a zero
value txout, but they're actually spendable; and you should know
if you have them. Listing also makes them available to tools like
dust-b-gone.
c6de7c3 trivial string change in wallet.cpp (the -> that) (Philip Kaufmann)
1e3473d Add operator names to DNS Seed list (Michael Ford)
a21df62 ensure consistent header comment naming conventions (Philip Kaufmann)
9e16cb1 Make 'Default: %u' spacing consistent in help message (Wladimir J. van der Laan)
6cb37a3 [Qt, Trivial] remove two unneeded includes of wallet/db.h (Philip Kaufmann)
68f795e [Qt, Trivial] fix header groupings + space, intdentation fixes (Philip Kaufmann)
985ec17 [Qt, Trivial] misc minor string changes (Philip Kaufmann)
c0555dc depends: latest config.guess and config.sub (Michael Ford)
89fc6b6 Remove leftover strlcpy.h copyright (Rob Van Mieghem)
468aa3b Re-wrote a passage of text that was difficult to understand. (Jason Lewicki)
71ad6bd [Trivial] format sync.h (Philip Kaufmann)
abcec30 Update REST URL to match reality (paveljanik)
447d37e Use https link to bitcoin.org in Doxygen intro (Michael Ford)
c069234 Fix typo in init.cpp interpration/interpretation (Michael Ford)
52070c8 Removed '()' where used without contents inside (Nicolas Benoit)
30c1db1 Replaced current function names with __func__ in LogPrintf() calls. (Nicolas Benoit)
9bdd03f Point to the Debian 7.8 installer (Michael Ford)
0b2f930 Fix docs for 'complete' field in 'signrawtransaction' response (charlescharles)
c2f2161 Add x86_64* i686* mips* and arm* to depends .gitignore (Michael Ford)
fa535f9 Remove folder and images for bootstrap.md (sandakersmann)
60c1469 [Qt] header group cleanup (Philip Kaufmann)
- write "Bitcoins" uppercase
- replace secure/insecure for payment requests with
authenticated/unauthenticated
- change a translatable string for payment request expiry to match another
existing string to only get ONE resulting string to translate
`--nocleanup` should provide a way to preserve test data, but should not have an impact on whether nodes are to be stopped after the test execution.
In particular, when currently running RPC tests with `--nocleanup`, then it may result in several active `bitcoind` processes, which are not terminated properly.
On hosts that had spent some time with a failed internet connection their
nAttempts penalty was going through the roof (e.g. thousands for all peers)
and as a result the connect search was pegging the CPU and failing to get
more than a 4 connections after days of running (because it was taking so
long per try).
According to Tor's extensions to the SOCKS protocol
(https://gitweb.torproject.org/torspec.git/tree/socks-extensions.txt)
it is possible to perform stream isolation by providing authentication
to the proxy. Each set of credentials will create a new circuit,
which makes it harder to correlate connections.
This patch adds an option, `-proxyrandomize` (on by default) that randomizes
credentials for every outgoing connection, thus creating a new circuit.
2015-03-16 15:29:59 SOCKS5 Sending proxy authentication 3842137544:3256031132
6171e49 [Qt] Use identical strings for expired payment request message (Philip Kaufmann)
06087bd [Qt] minor comment updates in PaymentServer (Philip Kaufmann)
35d1595 [Qt] constify first parameter of processPaymentRequest() (Philip Kaufmann)
9b14aef [Qt] take care of a missing typecast in PaymentRequestPlus::getMerchant() (Philip Kaufmann)
d19ae3c [Qt] remove unused PaymentRequestPlus::getPKIType function (Philip Kaufmann)
6e17a74 [Qt] paymentserver: better logging of invalid certs (Philip Kaufmann)
5a53d7c [Qt] paymentserver: do not log NULL certificates (Philip Kaufmann)
Compare the block download timeout to what the timeout would be if calculated
based on current time and current value of nQueuedValidatedHeaders, but
ignoring other in-flight blocks from the same peer. If the calculation based on
present conditions is shorter, then set that to be the time after which we
disconnect the peer for not delivering this block.
Before and after was tested in Windows:
before:
GUI: ReportInvalidCertificate : Payment server found
an invalid certificate: ("Microsoft Authenticode(tm) Root Authority")
GUI: ReportInvalidCertificate : Payment server found
an invalid certificate: ()
GUI: ReportInvalidCertificate : Payment server found
an invalid certificate: ()
GUI: ReportInvalidCertificate : Payment server found
an invalid certificate: ()
after:
GUI: ReportInvalidCertificate: Payment server found an
invalid certificate: "01" ("Microsoft Authenticode(tm) Root Authority")
() ()
GUI: ReportInvalidCertificate: Payment server found an
invalid certificate: "01" () () ("Copyright (c) 1997 Microsoft Corp.",
"Microsoft Time Stamping Service Root", "Microsoft Corporation")
GUI: ReportInvalidCertificate: Payment server found an
invalid certificate: "4a:19:d2:38:8c:82:59:1c:a5:5d:73:5f:15:5d:dc:a3" ()
() ("NO LIABILITY ACCEPTED, (c)97 VeriSign, Inc.", "VeriSign Time Stamping
Service Root", "VeriSign, Inc.")
GUI: ReportInvalidCertificate: Payment server found an
invalid certificate: "e4:9e:fd:f3:3a:e8:0e:cf:a5:11:3e:19:a4:24:02:32" ()
() ("Class 3 Public Primary Certification Authority")
Some tests in CheckBlockIndex require chainActive.Tip(), but when reindexing, chainActive has not been set on the first call to CheckBlockIndex.
reindex.py starts a node, mines 3 blocks, stops, and reindexes with CheckBlockIndex enabled.
Remove reliance on accounting "move" ledger entries. Instead,
create funding transactions (and deal with fee complexities).
Do not rely on broken SyncMetaData. Instead expect double-spend
amount to be debited from the default "" account.
Define CTransaction::IsEquivalentTo(const CTransaction& tx)
True if only scriptSigs are different. In other words, true if
the two transactions are malleability clones. In other words,
true if the two transactions have the same effect on the
outside universe.
In the wallet, only SyncMetaData for equivalent transactions.
437ada3 Switch test case signing to RFC6979 extra entropy (Pieter Wuille)
9d09322 Squashed 'src/secp256k1/' changes from 50cc6ab..1897b8e (Pieter Wuille)
SendMessages will now call getheaders on both inbound and outbound peers,
once the headers chain is close to synced. It will also try downloading
blocks from inbound peers once we're out of initial block download (so
inbound peers will participate in parallel block fetching for the last day
or two of blocks being downloaded).
This adds more tests to CheckBlockIndex:
- HAVE_DATA is true iff nTx > 0
- BLOCK_VALID_TRANSACTIONS is true iff nTx > 0
- BLOCK_VALID_TRANSACTIONS is true for a block and all parents iff
nChainTx > 0
1d21ba2 Scale up addrman (Pieter Wuille)
c6a63ce Always use a 50% chance to choose between tried and new entries (Pieter Wuille)
f68ba3f Do not bias outgoing connections towards fresh addresses (Pieter Wuille)
a8ff7c6 Simplify hashing code (Pieter Wuille)
e6b343d Make addrman's bucket placement deterministic. (Pieter Wuille)
b23add5 Switch addrman key from vector to uint256 (Pieter Wuille)
This is an advanced feature which will disable any kind of automatic
transaction broadcasting in the wallet. This gives the user full control
of how the transaction is sent.
For example they can broadcast new transactions through some other
mechanism themselves, after getting the transaction hex through `gettransaction`.
This just adds the option `-walletbroadcast=<0,1>`. Right now these
transactions will get the status
Status: conflicted, has not been successfully broadcast yet
They shouldn't be shown as conflicted at all (`walletconflicts` is empty). This status
will go away when the transaction is received through the network.
721cb55 GUI: Display label rather than address on popups (Luke Dashjr)
e96028c GUI: Clarify terminology; use "Label" heading for labels row, and "Node/Service" rather than [IP] "Address" (Luke Dashjr)
The environment is prepared by the main thread to guard against invalid locale settings and to prevent deinitialization issues of Boost path, which can result in app crashes.
1897b8e Merge pull request #229efc571c Add simple testcases for signing with rfc6979 extra entropy.
1573a10 Add ability to pass extra entropy to rfc6979
3087bc4 Merge pull request #228d9b9f11 Merge pull request #2180065a8f Eliminate multiple-returns from secp256k1.c.
354ffa3 Make secp256k1_ec_pubkey_create reject oversized secrets.
27bc131 Silence some warnings from pedantic static analysis tools, improve compatibility with C++.
3b7ea63 Merge pull request #221f789c5b Merge pull request #2154bc273b Merge pull request #222137a8ec Merge pull request #2167c3771d Disable overlength-strings warnings.
8956111 use 128-bit hex seed
02efd06 Use RFC6979 for test PRNGs
ae55e85 Use faster byteswapping and avoid alignment-increasing casts.
443cd4b Get rid of hex format and some binary conversions
0bada0e Merge #214: Improve signing API documentation & specification
8030d7c Improve signing API documentation & specification
7b2fc1c Merge #213: Removed gotos, which are hard to trace and maintain.
11690d3 Removed gotos, which are hard to trace and maintain.
122a1ec Merge pull request #205035406d Merge pull request #2062d4cd53 Merge pull request #16134b898d Additional comments for the testing PRNG and a seeding fix.
6efd6e7 Some comments explaining some of the constants in the code.
ffccfd2 x86_64 assembly optimization for scalar_4x64
67cbdf0 Merge pull request #207039723d Benchmarks for all internal operations
6cc8425 Include a comment on secp256k1_ecdsa_sign explaining low-s.
f88343f Merge pull request #203d61e899 Add group operation counts
2473f17 Merge pull request #202b5bbce6 Some readme updates, e.g. removal of the GMP field.
f0d851e Merge pull request #201a0ea884 Merge pull request #200f735446 Convert the rest of the codebase to C89.
bf2e1ac Convert tests to C89. (also fixes a use of bare "inline" in field)
fc8285f Merge pull request #199fff412e Merge pull request #1974be8d6f Centralize the definition of uint128_t and use it uniformly.
d9543c9 Switch scalar code to C89.
fcc48c4 Remove the non-storage cmov
55422b6 Switch ecmult_gen to use storage types
41f8455 Use group element storage type in EC multiplications
e68d720 Add group element storage type
ff889f7 Field storage type
7137be8 Merge pull request #1960768bd5 Get rid of variable-length hex string conversions
e84e761 Merge pull request #195792bcdb Covert several more files to C89.
45cdf44 Merge pull request #19317db09e Merge pull request #194402878a fix ifdef/ifndef
25b35c7 Convert field code to strict C89 (+ long long, +__int128)
3627437 C89 nits and dead code removal.
a9f350d Merge pull request #1914732d26 Convert the field/group/ecdsa constant initialization to static consts
19f3e76 Remove unused secp256k1_fe_inner_{start, stop} functions
f1ebfe3 Convert the scalar constant initialization to static consts
git-subtree-dir: src/secp256k1
git-subtree-split: 1897b8e90b
This adds a -checkblockindex (defaulting to true for regtest), which occasionally
does a full consistency check for mapBlockIndex, setBlockIndexCandidates, chainActive, and
mapBlocksUnlinked.
The scope of `std::locale::global` appears to be smaller than `setenv("LC_ALL", ...)` and insufficient to fix messed up locale settings for the whole application.
This fixes a subtle bug involving block re-orgs and non-standard transactions.
Start with a block containing a non-standard transaction, and
one or more transactions spending it in the memory pool.
Then re-org away from that block to another chain that does
not contain the non-standard transaction.
Result before this fix: the dependent transactions get stuck
in the mempool without their parent, putting the mempool
in an inconsistent state.
Tested with a new unit test.
5983a4e Add a NODE_GETUTXO service bit and document NODE_NETWORK. Stop translating the NODE_* names as they are technical and cannot be translated. (Mike Hearn)
Adds a regression test for the wallet's ResendWalletTransactions function, which uses a new, hidden RPC command "resendwallettransactions."
I refactored main's Broadcast signal so it is passed the best-block time, which let me remove a global variable shared between main.cpp and the wallet (nTimeBestReceived).
I also manually tested the "rebroadcast unconfirmed every half hour or so" functionality by:
1. Running bitcoind -connect=0.0.0.0:8333
2. Creating a couple of send-to-self transactions
3. Connect to a peer using -addnode
4. Waited a while, monitoring debug.log, until I see:
```2015-03-23 18:48:10 ResendWalletTransactions: rebroadcast 2 unconfirmed transactions```
One last change: don't bother putting ResendWalletTransactions messages in debug.log unless unconfirmed transactions were actually rebroadcast.
8a893c9 Includes: Do not include main.h from any other header (Jorge Timón)
eca0b1e Includes: MOVEONLY: move more method definitions out of wallet.h (Jorge Timón)
26c16d9 Includes: Refactor: Move CValidationInterface and CMainSignals out of main (Jorge Timón)
This change was suggested as Countermeasure 6 in
Eclipse Attacks on Bitcoin’s Peer-to-Peer Network, Ethan Heilman,
Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive Report
2015/263. March 2015.
This change was suggested as Countermeasure 2 in
Eclipse Attacks on Bitcoin’s Peer-to-Peer Network, Ethan Heilman,
Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive Report
2015/263. March 2015.
This change was suggested as Countermeasure 2 in
Eclipse Attacks on Bitcoin’s Peer-to-Peer Network, Ethan Heilman,
Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive Report
2015/263. March 2015.
Give each address a single fixed location in the new and tried tables,
which become simple fixed-size arrays instead of sets and vectors.
This prevents attackers from having an advantages by inserting an
address multiple times.
This change was suggested as Countermeasure 1 in
Eclipse Attacks on Bitcoin’s Peer-to-Peer Network, Ethan Heilman,
Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive Report
2015/263. March 2015.
It is also more efficient.
During startup, when adding pending wallet transactions, which spend outputs of
other pending wallet transactions, back to the memory pool, and when they are
added out of order, it appears as if they are orphans with missing inputs.
Those transactions are then rejected and flagged as "conflicting" (= not in the
memory pool, not in the block chain).
To prevent this, transactions are explicitly sorted.
See here for background: https://bugreports.qt.io/browse/QTBUG-34748
libxcb temporarily had an abi breakage which caused crashes when qt was
compiled against a non-compatible version. Building qt with -qt-xcb should have
shielded us from this issue, except that incompatible headers were used when
building qt's wrapper.
Make sure those headers aren't picked up by qt's build.
Details:
qt's build adds a wrapper around the xcb libs when -qt-xcb is used. This is
done to avoid having to link to a handful of different libs, which may not be
api/abi stable. This build depends on include-order, so that its files are
found before the real libxcb headers.
Our build (for other reasons related to qt's complicated build-system) injects
our prefix into CXXFLAGS. Because libxcb is found in this path, that reverses
the include-order, negating the purpose of the wrapper.
To fix, libxcb's includes are simply moved to a subdir. pkg-config ensures that
they're still found properly when needed.
To make things even more interesting, this behavior in qt's .pro files is broken:
INCLUDEPATH += $$QMAKE_CFLAGS_XCB
The INCLUDEPATH variable is processed by qmake which automatically prefixes each
entry with "-I". The QMAKE_CFLAGS_XCB variable comes from pkg-config and
already contains -I, making the path look like "-I-I/path/to/xcb/headers".
To work around that, CFLAGS/CXXFLAGS are used here rather than INCLUDEPATH.
1d9b378 qa/rpc-tests/wallet: Tests for sendmany (Luke Dashjr)
40a7573 rpcwallet/sendmany: Just take an array of addresses to subtract fees from, rather than an Object with all values being identical (Luke Dashjr)
292623a Subtract fee from amount (Cozz Lovan)
90a43c1 [Qt] Code-movement-only: Format confirmation message in sendcoinsdialog (Cozz Lovan)
Make sure that chainparams and logging is properly initialized. Doing
this for every test may be overkill, but this initialization is so
simple that that does not matter.
This should fix the travis issues.
. Closes the bug from commit e179eb3d9b
("bitcoin-qt -help" did not show any message)
. Move all the options in init.cpp (there were already some
options related to bitcoin-qt)
Help messages are formatted programmatically with FormatParagraph
in order not to break existing strings in Transifex.
The new format works even if the translation of the strings
modifies the lenght of the message.
Sqashed 6 commits in a single one.
Help messages correctly formatted for SVGA text mode (132 chars)
Help messages are formatted programmatically with FormatParagraph
in order not to break existing strings in Transifex.
The new format should work even if the translation of the strings
modifies the lenght of the message.
Fix - syntax error
Correct formatting for 79 chars
Correctly based on C++ functions
Removed spare spaces from option strings
Fix - syntax error
When re-indexing, there are a few cases where garbage data may be skipped in
the block files. In these cases, the indices are correctly written to the index
db, however the pointer to the next position for writing in the current block
file is calculated by adding the sizes of the valid blocks found.
As a result, when the re-index is finished, the index db is correct for all
existing blocks, but the next block will be written to an incorrect offset,
likely overwriting existing blocks.
Rather than using the sum of all valid blocks to determine the next write
position, use the end of the last block written to the file. Don't assume that
the current block is the last one in the file, since they may be read
out-of-order.
UNITTEST parameter are not used by any current tests, and the model
(modifyable parameters) is inconvenient when unit-testing. As
they are stored in a global structure eevery test
would have to (re)set up its own parameters.
For consistency it is also better to test with MAIN parameters.
6cb4a52 [Qt, Linux] honor current network when creating autostart link (Philip Kaufmann)
9673c35 [Qt, Win] honor current network when creating autostart link (Philip Kaufmann)
a0ae79d Replace CBlockHeader::GetHash with call to SerializeHash (Wladimir J. van der Laan)
62b30f0 Add serialize float/double tests (Wladimir J. van der Laan)
9f4fac9 src/txmempool.cpp: make numEntries a uint32_t (Wladimir J. van der Laan)
f4e6487 src/arith_256.cpp: bigendian compatibility (Wladimir J. van der Laan)
aac3205 src/netbase.h: Fix endian in CNetAddr serialization (Wladimir J. van der Laan)
01f9c34 src/serialize.h: base serialization level endianness neutrality (Wladimir J. van der Laan)
4e853aa src/script/script.h: endian compatibility for PUSHDATA sizes (Wladimir J. van der Laan)
4f92773 src/primitives/transaction.h: endian compatibility in serialization (Wladimir J. van der Laan)
81aeb28 src/primitives/block.cpp: endian compatibility in GetHash (Wladimir J. van der Laan)
dec84ca src/net.cpp: endian compatibility in EndMessage (Wladimir J. van der Laan)
556814e src/main.cpp: endian compatibility in packet checksum check (Wladimir J. van der Laan)
3ca5852 src/hash.cpp: endian compatibility (Wladimir J. van der Laan)
4414f5f build: Endian compatibility (Wladimir J. van der Laan)
We've chosen to htons/ntohs explicitly on reading and writing
(I do not know why). But as READWRITE already does an endian swap
on big endian, this means the port number gets switched around,
which was what we were trying to avoid in the first place. So
to make this compatible, serialize it as FLATDATA.
- Detect endian instead of stopping configure on big-endian
- Add `byteswap.h` and `endian.h` header for compatibility with
Windows and other operating systems that don't come with them
- Update `crypto/common.h` functions to use compat
endian header
This was added a while ago for testing purposes, but was never intended to be
used. Remove it until upstream libsecp256k1 decides that verification is
stable/ready.
These dialogs will be something that people occasionally open, not keep
open during their session, so just popping it up in a sensible place
is good enough. Remembering only creates potential issues, like spawning
it outside the current screen area.
On Ubuntu this causes the dialogs to be positioned in the
middle of the main dialog, so I didn't add code for that. YMMV.
Inspired by github pull #5777 by @L-Cranston-Shadow
32eaf8a WIN32 Seed Cleanup: Move nLastPerfmon behind win32 ifdef. Code to avoid calling Perfmon too often is only needed when perfmon is actually going to get called. This is not intended to make any functional difference in the addition of entropy to the random pool. (21E14)
Code to avoid calling Perfmon too often is only needed when perfmon is actually going to get called.
This is not intended to make any functional difference in the addition of entropy to the random pool.
For Gitian releases:
- Windows builds remain unchanged. libstdc++ was already linked statically.
- OSX builds remain unchanged. libstdc++ is tied to the SDK and not worth
messing with.
- Linux builds now statically link libstdc++.
For Travis:
- Match the previous behavior by adding --enable-reduce-exports as
necessary.
- Use static libstdc++ for the full Linux build.
Backwards-compatibility for libstdc++ is not limited to straightforward abi
changes. Symbol visibility also needs to be taken into consideration, and
that really can't be addressed simply.
Instead, just static-link libstdc++ for backwards-compat.
This is really a packager's option. While it's helpful to encourage devs to
test this option for daily builds, it's not reliable in several real-world
use-cases. Some older libstdc++ runtimes (freebsd 9, debian wheezy, for
example) fail to properly catch exceptions due to mismatched type_info.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=19664 for more info.
Split GetNextWorkRequired() into two functions to allow the difficulty calculations to
be tested without requiring a full blockchain.
Add unit tests to cover basic difficulty calculation, plus each of the min/max actual
time, and maximum difficulty target conditions.
This reverts commit 1078fb0885 (and thus
pull #5623). It has various issues:
- Pull request names get cut off at ", see e.g. a026a56
- Merge script no longer copes with pulls that have a milestone
attached, due to a duplicate 'title' in JSON that is not handled by the
ad-hoc parsing.
This makes it easier for us to replace it if desired, since it's now only in
one spot. Also, it avoids the openssl include from allocators.h, which
essentially forced openssl to be included from every compilation unit.
Since permissions and timestamps are changed for the sake of determinism,
. must not be added to the archive. Otherwise, tar may try to modify pwd when
extracting.
The fix to NegateSignatureS caused a test which had been failing
in IsValidSignatureEncoding to then fail in IsLowDERSignature.
Add new test so the original check remains exercised.
NegateSignatureS is called with a signature without a hashtype, so
do not save the last byte and append it after S negation.
Updates the two tests which were affected by this bug.
Normally bitcoin core does not display any network originated strings without
sanitizing or hex encoding. This wasn't done for strcommand in many places.
This could be used to play havoc with a terminal displaying the logs,
especially with printtoconsole in use.
Thanks to Evil-Knievel for reporting this issue.
The only time when a client sends a "getaddr" message is when he
esatblishes an Outbound connection (see ProcessMessage() in
src/main.cpp). Another bitcoin client is expected to receive a
"getaddr" message only on Inbound connection. Ignoring "gettaddr"
requests on Outbound connections can resolve potential privacy issues
(and as was said such request normally do not happen anyway).
- rework the function to not log errors but use throw JSONRPCError
- remove a check for IsLocked() that is done in sendtoaddress and
sendfrom RPC calls already
- cache GetBalance() return value, because it's possibly used twice
Bitcoin amounts are stored as uint64 in the protobuf messages (see
paymentrequest.proto), but CAmount is defined as int64_t. Because
of that we need to verify that single and accumulated amounts are
in a valid range and no variable overflow has happened.
- fixes#5624 (#5622)
Thanks @SergioDemianLerner for reporting that issue and also supplying us
with a possible solution.
- add static verifyAmount() function to PaymentServer and move the logging
on error into the function
- also add a unit test to paymentservertests.cpp
c++11 (libc++'s stdlib implementation anyway) doesn't allow for map types to be
forward-declared. for example:
class foo;
std::map<int, foo> bar; // error, foo has not been defined.
class foo{};
Since CWallet and CWalletTx are inter-dependent, but only std::map<*,CWalletTx>
is used, forward-declare CWallet instead and define CWalletTx first.
Despite the mangled git diff, this change only amounts to moving ~320 lines in
a single chunk.
Instead, create a separate function that applies the undo operation of a
CTxInUndo object onto a CCoinsViewCache. This method is used from
DisconnectBlock.
This fixes a potential race condition in the CCheckQueueControl constructor,
which was looking directly at data in CCheckQueue without acquiring its lock.
Remove the now-unnecessary friendship for CCheckQueueControl
9fddced Avoid storing a reference passed to SignatureChecker constructors (Pieter Wuille)
858809a Use separate SignatureChecker for CMutableTransaction (Pieter Wuille)
Note that this will also require translation changes in Transifex for the key
"A fee higher than %1 is considered an insanely high fee." which is now
"A fee higher than %1 is considered an absurdly high fee."
Signed-off-by: Daira Hopwood <daira@jacaranda.org>
Rebased by @laanwj:
- update for RPC methods added since 84d13ee: setmocktime,
invalidateblock, reconsiderblock. Only the first, setmocktime, required a change,
the other two are thread safe.
The main thread spends time waiting for the DetectShutdownThread.
So why not just run this waiting loop function in the main thread?
One thread-stack less saves 4MB of virtual memory on 32-bit, and 8MB on
64-bit.
The default font changed again.
The real fix is to compile qt against a >= 10.8 sdk, but this is simple enough
to backport to 0.10 to avoid having to do that there.
Note: NSAppKitVersionNumber is a double and there's no official value for
NSAppKitVersionNumber10_10. Since == isn't reliable for doubles, use Apple's
guidelines for testing versions here:
https://developer.apple.com/library/mac/releasenotes/AppKit/RN-AppKit/
Chinese and Japanese fonts have been hard-coded as well, otherwise they fail to
show up at all.
This avoids a regression for issues like #334 where high speed
repeated connections eventually run the HTTP client out of
sockets because all of theirs end up in time_wait.
Maybe the trade-off here is suboptimal, but if both choices will
fail then we prefer fewer changes until the root cause is solved.
- now logs if -rootcertificates="" was used to disable payment request
authentication via X.509 certificates
- also logs which file is used as trusted root cert, if -rootcertificates
is set
1dd8ee7 improve tests for #5655 (Jonas Schnelli)
56c1093 fix tests for #5655 (Wladimir J. van der Laan)
16a5c18 Add a -rpckeepalive and disable RPC use of HTTP persistent connections. (Gregory Maxwell)
- this is based on #4122 (which can be closed)
Currently a payment request is only checked for expiration upon receipt.
It should be checked again immediately before sending coins to prevent
the user from paying to an expired invoice which would then require a
customer service interaction.
- add static verifyExpired() function to PaymentServer to be able to use
the same validation code in GUI and unit-testing code
- extend unit tests to use that function and also add an unit test which
overflows, because payment requests allow expires as uint64, whereas we
use int64_t for verification of expired payment requests
It turns out that some miners have been staying with old versions of
Bitcoin Core because their software behaves poorly with persistent
connections and the Bitcoin Core thread and connection limits.
What happens is that underlying HTTP libraries leave connections open
invisibly to their users and then the user runs into the default four
thread limit. This looks like Bitcoin Core is unresponsive to RPC.
There are many things that should be improved in Bitcoin Core's behavior
here, e.g. supporting more concurrent connections, not tying up threads
for idle connections, disconnecting kept-alive connections when limits
are reached, etc. All are fairly big, risky changes.
Disabling keep-alive is a simple workaround. It's often not easy to turn
off the keep-alive support in the client where it may be buried in some
platform library.
If you are one of the few who really needs persistent connections you
probably know that you want them and can find a switch; while if you
don't and the misbehavior is hitting you it is hard to discover the
source of your problems is keepalive related. Given that it is best
to default to off until they're handled better.
- Check that image contents match pre- and post- crushing.
- Also remove use of external tool to compute sha256 in favor of hashlib.
- contrib: remove all use of shell=True in strip_pngs.py
Using `shell=True` can be a security hazard. See e.g.
https://docs.python.org/2/library/subprocess.html#subprocess.check_output
17005bc [Qt] add payment request unit test for non matching networks (Philip Kaufmann)
080da96 [Qt] prepare paymentservertests for new unit tests (Philip Kaufmann)
- verify that payment request network matches client network
- add static verifyNetwork() function to PaymentServer to be able to use
the same validation code in GUI and unit-testing code
- add a second PaymentRequest Test CA certificate to paymentrequestdata.h
(serial number f0:da:97:e4:38:d7:64:16) as caCert2_BASE64
- rename existing Test CA certificate to caCert1_BASE64
- rename existing payment request data to know they belong to
caCert1_BASE64
- update comments to reflect the changes and add a missing comment to one
of the payment requests
b468e81 Qt: Clarify sign/verify dialog text to specifically state that these messages only prove one receives with the address in question, and makes no claim to sender of transactions (Luke Dashjr)
This harmonizes the block fetch timeout with the existing ping timeout
and eliminates a guaranteed eventual failure from congestion collapse
for a network operating right at its limit.
It's unlikely that we wouldn't suffer other failures if we were really
anywhere near the network's limit, and a complete avoidance of congestion
collapse risk requires (I think) an exponential back-off. So this isn't
a major concern, but I think it's also useful for reducing the complexity
of understanding out timeouts.
- it is helpful to be able to test and verify payment request processing
by allowing self signed root certificates (e.g. generated by Gavins
"certificate authority in a box")
- This option is just shown in the UI options, if -help-debug is enabled.
- before it was possible to use the steps to change e.g. amouns of
authenticated or unauthenticated payment requests (AmountSpinBox is
already set to read-only here) - this is now fixed
- also move the reimplemented stepEnabled() function to the
protected section of our class, where it belongs (see Qt doc)
8dccba6 fail immediately on an empty signature (Cory Fields)
dad7764 depends: bump openssl to 1.0.1k (Cory Fields)
488ed32 consensus: guard against openssl's new strict DER checks (Cory Fields)
New versions of OpenSSL will reject non-canonical DER signatures. However,
it'll happily decode them. Decode then re-encode before verification in order
to ensure that it is properly consumed.
Makes it possible to compactly provide a delibrately invalid signature
for use with CHECK(MULTI)SIG. For instance with BIP19 if m != n invalid
signatures need to be provided in the scriptSig; prior to this change
those invalid signatures would need to be large DER-encoded signatures.
Note that we may want to further expand on this change in the future by
saying that only OP_0 is a "valid" invalid signature; BIP19 even with
this change is inherently malleable as the invalid signatures can be any
validly encoded DER signature.
2ecd294 Bugfix: configure: Correctly detect "nothing to build" condition (Luke Dashjr)
b7a4ecc Bugfix: Only check for boost when building code that requires it (Luke Dashjr)
a19eeac Bugfix: configure: Check for openssl/ec.h (Luke Dashjr)
fe925e2 Use EXTRA_LIBRARIES instead of noinst_LIBRARIES so we can avoid building unused code (Cory Fields)
This will disconnect peers that do not transfer a block in 10 minutes, plus
5 minutes for every previously queued block with validated headers
(accomodating downstream bandwidth down to a few kilobytes per second - below
that the node would have trouble staying synchronized anyway).
on rare occasions, rand() was returning duped values, causing duplicate
transactions.
BuildMerkleTree happily used these, but CPartialMerkleTree caught them and
returned a null merkle root.
Rather than taking changes with rand(), use the loop counter to guarantee
unique values.
At sipa's request, also remove the remaining uses of rand().
856e862 namespace: drop most boost namespaces and a few header cleanups (Cory Fields)
9b1ab86 namespace: drop boost::assign altogether here (Cory Fields)
a324199 namespace: remove boost namespace pollution (Cory Fields)
50cc6ab Merge pull request #178941e221 Add tests for handling of the nonce function in signing.
10c81ff Merge pull request #1777688e34 Add magnitude limits to secp256k1_fe_verify to ensure that it's own tests function correctly.
4ee4f7a Merge pull request #17670ae0d2 Use secp256k1_fe_equal_var in secp256k1_fe_sqrt_var.
7767b4d Merge pull request #1759ab9335 Add a reference consistency test to ge_tests.
60571c6 Rework group tests
d26e26f Avoid constructing an invalid signature with probability 1:2^256.
b450c34 Merge pull request #163d57cae9 Merge pull request #15449ee0db Add _normalizes_to_zero_var variant
eed599d Add _fe_normalizes_to_zero method
d7174ed Weak normalization for secp256k1_fe_equal
0295f0a weak normalization
bbd5ba7 Use rfc6979 as default nonce generation function
b37fbc2 Implement SHA256 / HMAC-SHA256 / RFC6979.
c6e7f4e [API BREAK] Use a nonce-generation function instead of a nonce
cf0c48b Merge pull request #169603c33b Make signing fail if a too small buffer is passed.
6d16606 Merge pull request #1687277fd7 Remove GMP field implementation
e99c4c4 Merge pull request #12313278f6 Add explanation about how inversion can be avoided
ce7eb6f Optimize verification: avoid field inverse
a098f78 Merge pull request #16038acd01 Merge pull request #1656a59012 Make git ignore bench_recover when configured with benchmark enabled
1ba4a60 Configure options reorganization
3c0f246 Merge pull request #157808dd9b Merge pull request #1568dc75e9 Merge pull request #15828ade27 build: nuke bashisms
5190079 build: use subdir-objects for automake
8336040 build: disable benchmark by default
git-subtree-dir: src/secp256k1
git-subtree-split: 50cc6ab062
Instead of using a fixed-width font in a label, which virtually
guarentees a horizontal scrollbar, use a proper text-document
that can re-layout based on user input.
6bd0dc2 arith_uint256: remove initialization from byte vector (Wladimir J. van der Laan)
30007fd Remove now-unused methods from arith_uint256 and base_uint (Wladimir J. van der Laan)
edc7204 Remove arith_uint160 (Wladimir J. van der Laan)
dba2e91 Add tests for new uint256 (Wladimir J. van der Laan)
92cdb1a Add conversion functions arith_uint256<->uint_256 (Wladimir J. van der Laan)
bfc6070 uint256->arith_uint256 blob256->uint256 (Wladimir J. van der Laan)
734f85c Use arith_uint256 where necessary (Wladimir J. van der Laan)
34cdc41 String conversions uint256 -> uint256S (Wladimir J. van der Laan)
2eae315 Replace uint256(1) with static constant (Wladimir J. van der Laan)
8076585 Replace GetLow64 with GetCheapHash (Wladimir J. van der Laan)
4f15249 Replace direct use of 0 with SetNull and IsNull (Wladimir J. van der Laan)
5d3064b Temporarily add SetNull/IsNull/GetCheapHash to base_uint (Wladimir J. van der Laan)
Remove initialization from vector (as this is only used in the tests).
Also implement SetHex and GetHex in terms of uint256, to avoid
duplicate code as well as avoid endianness issues (as they
work in term of bytes).
- Methods that access the guts of arith_uint256 are removed,
as these are incompatible between endians. Use uint256 instead
- Serialization is no longer needed as arith_uint256's are never
read or written
- GetHash is never used on arith_uint256
If uint256() constructor takes a string, uint256(0) will become
dangerous when uint256 does not take integers anymore (it will go
through std::string(const char*) making a NULL string, and the explicit
keyword is no help).
SignatureHash and its test function SignatureHashOld
return uint256(1) as a special error signaling value.
Return a local static constant with the same value instead.
Previous behavior with IsFinalTx() being an IsStandard() rule was rather
confusing and interferred with testing of protocols that depended on
nLockTime.
Otherwise, if CCoinsViewCache::ModifyCoins throws an exception in between
setting hasModifier and constructing the CCoinsModifier, the cache ends up
in an inconsistent state, resulting in an assert failure in the next
modification.
Bug discovered by Wladimir J. van der Laan.
12d927a RPC test for immature balance (Jonas Schnelli)
8024d67 Add immature balances to getwalletinfo. (Gregory Maxwell)
d44c545 Add unconfirmedbalance field to getwalletinfo (azeteki)
4caad26 depends: bump cctools to a custom version with less deps (Cory Fields)
46f54bf build: osx builders no longer need 32bit compiler support (Cory Fields)
4fe6c3c depends: major upgrade to darwin toolchain (Cory Fields)
ec90c97 depends: osx: fix qt5 build against 10.10 sdk (Cory Fields)
With the splashscreen being able to be closed it is possible to
shutdown during the lengthy verifyDB method. (Takes about a minute
on my machine). This change allows us to shutdown much sooner.
Github-Pull: #5557
tl;dr: Update to the newer stable toolchain and SDK for OSX without giving up
any backwards compatibility. We can move to clang 3.5 as a next step which
allows use to use libc++ and the 10.10 sdk, but we'll need to find a build that
works in gitian/travis first.
Switch to a new, better maintained fork of cctools:
https://github.com/tpoechtrager/cctools-port
I've forked this and will be working on it some as well:
https://github.com/theuni/cctools-port
This brings in:
cctools v862
ld64: v241.9
It also fixes 64bit builds, so there's no longer any need to use a 32bit clang.
Since clang is no longer tied to an old/crusty 32bit build, clang has been
upgraded to 3.3. Unfortunately, there's a bug in 3.4 that breaks builds. 3.5
works fine, but there are no binary builds compatible with precise, which is
currently used for gitian and travis. We could always build our own if
necessary.
After updating to stable clang/linker/cctools, it's possible to use a more
recent SDK. The current SDK (10.7) through the most recent 10.10 have all been
built/tested successfully, both with and without 10.6 compatibility. However,
10.10 requires clang 3.5.
SDKs >= 10.9 use libc++ rather than libstdc++. This is verified working as well.
1b178a7 Bugfix: ConnectBlock: In case the genesis block gets in with fJustCheck, behave correctly (Luke Dashjr)
228d238 Make CCoinsViewCache's copy constructor private (Luke Dashjr)
Broken hash logic caused all depends on some platforms (osx at least) to end up
with the same build-id. Without this fix, nothing will be rebuilt when recipes
or dependencies change.
It is easily confused with CCoinsViewCache(CCoinsView*), which creates a sub-cache, but instead of creating a sub-cache, the copy constructor would copy the original and use that original's base, defeating the intended isolation.
7c5dd60 Adding RPC tests for the following wallet related calls: getbalance, listsinceblock, listtransactions, listlockunspent, listaccounts listaddressgroupings (Everett Forth)
Previously an empty script wouldn't be hashed, and CScriptID would be
assigned the incorrect value of 0 instead. This bug can be seen in the
RPC decodescript command:
$ btc decodescript ""
{
"asm" : "",
"type" : "nonstandard",
"p2sh" : "31h1vYVSYuKP6AhS86fbRdMw9XHieotbST"
}
Correct output:
$ btc decodescript ""
{
"asm" : "",
"type" : "nonstandard",
"p2sh" : "3J98t1WpEZ73CNmQviecrnyiWrnqRhWNLy"
}
Don't allow immediate inv driven block downloads if
a peer already has MAX_BLOCKS_IN_TRANSIT_PER_PEER
active downloads. Prevents bogus inv spam from
blowing up block transfer tracking data structures.
Previously the minRelayTxFee was only enforced on user specified values.
It was possible for smartfee to produce a fee below minRelayTxFee which
would just result in the transaction getting stuck because it can't be
relayed.
This also introduces a maxtxfee option which sets an absolute maximum
for any fee created by the wallet, with an intention of increasing
user confidence that the automatic fees won't burn them. This was
frequently a concern even before smartfees.
If the configured fee policy won't even allow the wallet to meet the relay
fee the transaction creation may be aborted.
4709160 [Qt] fix a translation that occurs 2 times but was a little different (Philip Kaufmann)
50db7d9 [Qt] change some strings to reflect name change to Bitcoin Core (Philip Kaufmann)
2747f7c [Qt] fix missing plural form for a string in sendcoinsdialog (Philip Kaufmann)
ac23394 resize tray icon because a 1024x1024 icon won't show in ubuntu (bug) (Jonas Schnelli)
8e76ca0 Qt: Go back to using QIcon functionality for scaling (Wladimir J. van der Laan)
54f2571 Qt: HiDPI (retina) support for splash screen (Jonas Schnelli)
'Sane' was already defined by this code as:
fee.GetFeePerK() > minRelayFee.GetFeePerK() * 10000
But sanity was only enforced for data loaded from disk.
Note that this is a pretty expansive definition of 'sane': A 10 BTC
fee is still passes the test if its on a 100kb transaction.
This prevents a single insane fee on the network from making us reject
our stored fee data at start. We still may reject valid saved fee
state if minRelayFee is changed between executions.
This also reduces the risk and limits the damage from a cascading
failure where one party pays a bunch of insane fees which cases
others to pay insane fees.
Since the last commit will force rebuilds of all depends, take the opportunity
to clean up a few other things that would trigger rebuilds as well.
- Move source stamps to the sources dir so that SOURCES_PATH is respected for
"make download".
- Only print "fetching..." when actually downloading a file.
- Avoid using non-deterministic paths for the recipe hash (patch location).
This should ensure that all builders get the same resulting build-ids.
- Use a per-package source paths. This will allow for removing old source files
in the future.
- Use a host-agnostic path for downloads which gets cleaned up properly.
This is a check that is mentioned in BIP 37, but never implemented in the
reference code. As Bitcoin Core so far never decodes partial merkle trees,
this is not a problem. But perhaps others use the code as a reference.
34318d7 RPC-test based on invalidateblock for mempool coinbase spends (Gavin Andresen)
7fd6219 Make CTxMemPool::remove more effecient by avoiding recursion (Matt Corallo)
b7b4318 Make CTxMemPool::check more thourough by using CheckInputs (Matt Corallo)
723d12c Remove txn which are invalidated by coinbase maturity during reorg (Matt Corallo)
868d041 Remove coinbase-dependant transactions during reorg. (Matt Corallo)
932ef50 [REST] JSON output: remove block infos from tx details if it is nested in block (Jonas Schnelli)
cae5486 [REST] added /rest/block/notxdetails/<hash> into REST-interface.md documentation (Jonas Schnelli)
73351c3 [REST] /rest/block response with full tx details (Jonas Schnelli)
bccaf86 Merge pull request #1502a53a47 Merge pull request #1515f5a31f Merge pull request #1493907277 Merge pull request #142a3e0611 Enable tests in x86 travis builds
45da235 x86 builder
8bb0e93 Merge pull request #155971fe81 build: fix openssl detection for cross builds
f22d73e Explicitly access %0..%2 as 64-bit so we use the right registers for x32 ABI
e66d4d6 Avoid the stack in assembly and use explicit registers
cf7b2b4 Fix ECDSA message hashes to 32 bytes
056ad31 Really compile with -O3 by default
74ad63a Merge pull request #1469000458 Merge pull request #1451f46b00 build: fix __builtin_expect detection for clang
aaba2e0 Merge pull request #1368a0775c Merge pull request #144ee1eaa7 Merge pull request #141c88e2b8 Compile with -O3 by default
6558a26 Make the benchmarks print out stats
000bdf6 Rename bench_verify to bench_recovery
7c6fed2 Add a few more additional tests.
992e03b travis: add clang to the test matrix
b43b79a Merge pull request #143e06a924 Include time.h header for time().
8d11164 Add some additional tests.
3545627 Merge pull request #1186a9901e Merge pull request #137376b28b Merge pull request #1281728806 Merge pull request #138a5759c5 Check return value of malloc
39bd94d Variable time normalize
ad86bdf Merge pull request #14054b768c Another redundant secp256k1_fe_normalize
69dcaab Merge pull request #1391c29f2e Remove redundant secp256k1_fe_normalize from secp256k1_gej_add_ge_var.
2b9388b Remove unused secp256k1_fe_inv_all
f461b76 Allocate precomputation arrays on the heap
b2c9681 Make {mul,sqr}_inner use the same argument order as {mul,sqr}
6793505 Convert YASM code into inline assembly
f048615 Rewrite field assembly to match the C version
3ce74b1 Tweak precomputed table size for G
git-subtree-dir: src/secp256k1
git-subtree-split: bccaf86caa
4be639e Use RPC_INVALID_PARAMETER instead of RPC_WALLET_ERROR for invalid amount. No return at the end of void function. (Pavel Janík)
b93173d Move SendMoney() to rpcwallet.cpp. (Pavel Janík)
- rest block request returns full unfolded tx details
- /rest/block/notxdetails/<HASH> returns block where transactions are only represented by its hash
5ec654b [Qt] update paymentserver license and cleanup ordering (Philip Kaufmann)
4333e26 [Qt] add BIP70 DoS protection test (Philip Kaufmann)
31f8494 [Qt] add BIP70 payment request size DoS protection for URIs (Philip Kaufmann)
2284ccb [Qt] remove dup lock that is done in SetAddressBook() (Philip Kaufmann)
1ec753f [Qt] ensure socket is set to NULL in PaymentServer::ipcSendCommandLine (Philip Kaufmann)
814429d [Qt] add BIP70/BIP71 constants for all messages and mime types (Philip Kaufmann)
b82695b [Qt] make PaymentServer::ipcParseCommandLine void (Philip Kaufmann)
This still leaves transactions in mempool that are potentially
invalid if the maturity period has been reorged out of, but at
least they're not missing inputs entirely.
- current code only does this for payment request files, which are
used on Mac
- also rename readPaymentRequest to readPaymentRequestFromFile, so it's
obvious that function only handles payment request files and not URIs
- small logging changes in readPaymentRequestFromFile
a26bf47 Add a new test for FormatParagraph (string longer than the default width). (Pavel Janík)
83b81f6 Format paragraphs properly - count the space between words. (Pavel Janík)
- Add a space after the fixed string prepended to file names when input or
output file changes
- Clarify the error message when the genesis block is not found in the
hash list (...why do we have this at all?)
TLS is subject to downgrade attacks when SSLv3 is available, and
SSLv3 has vulnerabilities.
The popular solution is to disable SSLv3. On the web this breaks
some tiny number of very old clients. While Bitcoin RPC shouldn't
be exposed to the open Internet, it also shouldn't be exposed to
really old SSL implementations, so it shouldn't be a major issue
for us to disable SSLv3.
There is more information on the downgrade attacks and disabling
SSLv3 at https://disablessl3.com/ .
Add a new method DecryptKey in crypter.cpp, that combines the logic for
decrypting, initialising and validating a CKey object. This was
previously duplicated.
b0210a9 Merge pull request #135ee3eb4b Fix a memory leak and add a number of small tests.
4d879a3 Merge pull request #134d5e8362 Merge pull request #1277b92cf6 Merge pull request #1320bf70a5 Merge pull request #13329ae131 Make scalar_add_bit test's overflow detection exact
9048def Avoid undefined shift behaviour
efb7d4b Use constant-time conditional moves instead of byte slicing
d220062 Merge pull request #13182f9254 Fix typo
601ca04 Merge pull request #12935399e0 Bugfix: b is restricted, not r
c35ff1e Convert lambda splitter to pure scalar code.
cc604e9 Avoid division when decomposing scalars
ff8746d Add secp256k1_scalar_mul_shift_var
bd313f7 Merge pull request #119276f987 Merge pull request #12425d125e Merge pull request #12624b3c65 Add a test case for ECDSA recomputing infinity
32600e5 Add a test for r >= order signature handling
4d4eeea Make secp256k1_fe_mul_inner use the r != property
be82e92 Require that r and b are different for field multiplication.
597128d Make num optional
659b554 Make constant initializers independent from num
0af5b47 Merge pull request #120e2e8a36 Merge pull request #117c76be9e Remove unused num functions
4285a98 Move lambda-splitting code to scalar.
f24041d Switch all EC/ECDSA logic from num to scalar
6794be6 Add scalar splitting functions
d1502eb Add secp256k1_scalar_inverse_var which delegates to GMP
b5c9ee7 Make test_point_times_order test meaningful again
0b73059 Switch wnaf splitting from num-based to scalar-based
1e6c77c Generalize secp256k1_scalar_get_bits
5213207 Add secp256k1_scalar_add_bit
3c0ae43 Merge pull request #1226e05287 Do signature recovery/verification with 4 possible recid case
e3d692f Explain why no y=0 check is necessary for doubling
f7dc1c6 Optimize doubling: secp256k1 has no y=0 point
666d3b5 Merge pull request #1212a54f9b Correct typo in comment
9d64145 Merge pull request #11499f0728 Fix secp256k1_num_set_bin handling of 0
d907ebc Add bounds checking to field element setters
bb2cd94 Merge pull request #116665775b Don't split the g factor when not using endomorphism
9431d6b Merge pull request #115e2274c5 build: osx: attempt to work with homebrew keg-only packages
git-subtree-dir: src/secp256k1
git-subtree-split: b0210a95da
OP_CODESEPARATOR is an actual executed instruction, not a declarative
thing, so if it's wrapped in an OP_IF it can be turned off.
Using this to implement Rivest's Paywords is left as an exercise for the
reader.
Immature coinbase spends are allowed in the memory pool if they can be mined in the next block.
They are not allowed in the memory pool if they cannot be mined in the next block.
This regression test tests those edge cases.
Although script_valid.json and script_invalid.json are loaded correctly by the
JSON interpreter used by bitcoin core, these same files are often used by other
libraries and do not necessarily load correctly due to the fact that newlines
contained inside strings are not valid and must instead use the escape
character \n. The files tx_valid.json and tx_invalid.json handle this
correctly, so I've changed the formatting in script_valid.json and
script_invalid.json to mirror those files.
362001c Move CHECKMULTISIG order tests out of automatically generated block (Pieter Wuille)
f67a9ce Use deterministically generated script tests (Pieter Wuille)
This avoids connecting to them again too soon in ThreadOpenConnections.
Make an exception for connection failures to the proxy as these
shouldn't affect the status of specific nodes.
Now that signing is deterministic, we can require exact correspondence between the
automatically generated tests and the ones read from JSON. Do this, and update
the tests to those deterministic versions. Note that some flag changes weren't
correctly applied before.
1. Remove the default format (binary) because `rest/block/<hash>/Hex` would end up delivering binary data.
2. List available formats when chosen format was not found (reduces need for documentation)
3. Change url syntax to dot extension like format chosing (like `rest/tx/<hash>.json`
9ec75c5 Add a locking mechanism to IsInitialBlockDownload to ensure it never goes from false to true. (Ruben Dario Ponticelli)
a2d0fc6 Fix IsInitialBlockDownload which was broken by headers first. (Ruben Dario Ponticelli)
5dc713b [REST] set REST API behind "-rest" option (Jonas Schnelli)
78bdc81 [REST] give an appropriate response in warmup phase (Jonas Schnelli)
210eba9 [REST] fix headersonly flag for BINARY responses (Jonas Schnelli)
- Split linux32/linux64 releases
- Split win32/win64 zips
- Post-processing should no longer be required. The deterministic outputs are
ready for consumption.
- add newly added variables to the constructor init
- move an already existing bool also to constructor init
- move a connect call to setClientModel and add a NULL pointer check
Based on an earlier patch by Peter Todd, though the rules here are different
(P2SH scripts should not have a CLEANSTACK check before the P2SH evaluation).
Fixes default hidden symbol visibility for our linux->osx cross build. Without
this change, the check for working -fvisibility=hidden fails, and all symbols
are visible by default.
Ugly as this is, it's just a simple find/replace to fix a bug in Qt's configure.
They assume in an "XPLATFORM_MAC" block that the builder is capable of running
osx programs. This should be "BUILD_ON_MAC" instead.
There are 3 pieces of data that are maintained on disk. The actual block
and undo data, the block index (which can refer to positions on disk),
and the chainstate (which refers to the best block hash).
Earlier, there was no guarantee that blocks were written to disk before
block index entries referring to them were written. This commit introduces
dirty flags for block index data, and delays writing entries until the actual
block data is flushed.
With this stricter ordering in writes, it is now safe to not always flush
after every block, so there is no need for the IsInitialBlockDownload()
check there - instead we just write whenever enough time has passed or
the cache size grows too large. Also updating the wallet's best known block
is delayed until this is done, otherwise the wallet may end up referring to an
unknown block.
In addition, only do a write inside the block processing loop if necessary
(because of cache size exceeded). Otherwise, move the writing to a point
after processing is done, after relaying.
4574248 [Qt] minor ordering cleanup after new fee selection (Philip Kaufmann)
a01fa30 minor style cleanup after HTTP rest interface merge (Philip Kaufmann)
Previously -proxy was not setting the proxy for IsLimited networks, so
if you set your configuration to be onlynet=tor you wouldn't get an
IPv4 proxy set.
The payment protocol gets its proxy configuration from the IPv4 proxy,
and so it would experience a connection leak.
This addresses issue #5355 and also clears up a cosmetic bug where
getinfo proxy output shows nothing when onlynet=tor is set.
Like in a real world situation, a safe mode test should also be visible in the
UI. A test of safe mode is furthermore mostly relevant for developers, so it
should not be overwritten by a warning about a pre-release test build.
Add a sanity check to prevent cosmic rays from flipping a bit in the
generated public key, or bugs in the elliptic curve code. This is
simply done by signing a (randomized) message, and verifying the
result.
246659a gitian: make tarballs deterministic and nuke .la files from build output (Cory Fields)
c54d647 travis: let travis use shared libs for tests (Cory Fields)
4bbbdf3 gitian: quick docs update (Cory Fields)
1aead42 gitian: descriptors overhaul (Cory Fields)
5f93ec2 depends: Add a package for qt4.6. Linux uses it by default. (Cory Fields)
4302fa6 depends: Use pic for all linux dependencies (Cory Fields)
- Update comments in checkpoints to be doxygen compatible
- Update comments in checkqueue to be doxygen compatible
- Update coins to be doxygen compatible
- Fix comment typo in crypter.h
- Update licenses/copyright dates
Closes#5325#5184#5183#5182
ca81587 Test the exact order of CHECKMULTISIG sig/pubkey evaluation (Peter Todd)
98b135f Make STRICTENC invalid pubkeys fail the script rather than the opcode. (Pieter Wuille)
Some users may have libtool libs (.la) installed in their linker search paths.
In this case, using -static-libtool-libs would try to link in .a's instead of
shared libs. That would be harmless unless the .a was built in a way that
would break linking, like non-fpic.
What we really want is "-static" here. Despite its name, it's actually less
aggressive than -static-libtool-libs. It causes only internal libs to be linked
statically (libbitcoinconsensus is the one were'a after).
This turns STRICTENC turn into a softforking-safe change (even though it
is not intended as a consensus rule), and as a result guarantee that using
it for mempool validation only results in consensus-valid transactions in
the mempool.
Previously, AcceptBlockHeader did not check the header (in particular
PoW). This made the client accept invalid-PoW-headers from peers in
headers-first sync.
Descriptors now make use of the dependencies builder, so results are cached.
A very new version (>= e9741525c) of Gitian should be used in order to take
advantage of caching.
We're not ready to switch to a static qt5 for Linux yet due to missing plugin
support. This adds a recipe for building a shared qt4 that we build and link
against, but don't distribute.
make USE_LINUX_STATIC_QT5=1 can be used to build static qt5 as before.
Ported txnmall.sh to Python, and updated to match
recent transaction malleability changes.
I also modified it so it tests both double-spending
confirmed and unconfirmed (only-in-mempool) transactions.
Renamed to txn_doublespend, since that is really what is
being tested. And told the pull-tester to run both
variations on this test.
c1c9d5b [Qt] Add Smartfee to GUI (Cozz Lovan)
e7876b2 [Wallet] Prevent user from paying a non-sense fee (Cozz Lovan)
ed3e5e4 [Wallet] Add global boolean whether to pay at least the custom fee (default=true) (Cozz Lovan)
0ed9675 [Wallet] Add global boolean whether to send free transactions (default=true) (Cozz Lovan)
f9e40fb revert part of 9eda1620b (Cory Fields)
4300876 build: secp256k1 as a subdir, since it's required (Cory Fields)
0dc8613 build: fixup configure to not export anything (Cory Fields)
54566de depends: quit exporting in config.site (Cory Fields)
ff1e5ba depends: add gmp package (Cory Fields)
cf61b54 Don't use bashisms in configure (Pieter Wuille)
dffb8f8 Use libsecp256k1 in key.cpp (Pieter Wuille)
4c97c64 Do not use EC code in global constructors (Pieter Wuille)
07a9901 Always build and link libsecp256k1 (Pieter Wuille)
d48555b Squashed 'src/secp256k1/' content from commit ad2028f (Pieter Wuille)
7a7e109 Delete src/secp256k1 before subtree import (Pieter Wuille)
3c30f27 travis: disable rpc tests for windows until they're not so flaky (Cory Fields)
daf03e7 RPC tests: create initial chain with specific timestamps (Gavin Andresen)
a8b2ce5 regression test only setmocktime RPC call (Gavin Andresen)
Currently Bitcoin-Qts support for OSX User Notification Center is broken. This pull will fix a known issue of non-official-apple-built apps having problems sending user notifications.
NOP1 to NOP10 are reserved for future soft-fork upgrades. In the event
of an upgrade such NOPs have *VERIFY behavior, meaning that if their
arguments are not correct the script fails. Discouraging these NOPs by
rejecting transactions containing them from the mempool ensures that
we'll never accept transactions, nor mine blocks, with scripts that are
now invalid according to the majority of hashing power even if we're not
yet upgraded. Previously this wasn't an issue as the IsStandard() rules
didn't allow upgradable NOPs anyway, but 7f3b4e95 relaxed the
IsStandard() rules for P2SH redemptions allowing any redeemScript to be
spent.
We *do* allow upgradable NOPs in scripts so long as they are not
executed. This is harmless as there is no opportunity for the script to
be invalid post-upgrade.
- switching release builds to 10.7
- release binary looks like 64bit only
- tested up to 10.10
- gitian builder builds against 10.7. The docs should be consistant.
- remove 32bit text because nowadays it's obvious to support 64bit only on OSX.
* Support new rpc commands.
* Several commands now take an optional boolean includeWatchonly argument.
* "help" now has section headers, ignore them when compiling list of commands.
Attempt to codify the possible error statuses associated with script
validation. script/types.h has been created with the expectation that it will
be part of the public lib interface. The other flag enums will be moved here in
a future commit.
Logging has also been removed in order to drop the dependency on core.h. It can
be re-added to bitcoind as-needed. This makes script verification finally free
of application state and boost!
Speed up generating blocks in regression test mode, by moving
block-creating and nonce-finding directly into the setgenerate
RPC call (instead of starting up a mining thread and waiting for
it to find a block).
This makes the forknotify RPC test three times quicker, for
example (10 seconds runtime instead of 30 seconds, assuming
the initial blockchain cache is already built).
- use __func__ instead of hard-coded function name for logging
- update -discover help message to reflect newly added parameter
interaction
- use DEFAULT_LISTEN in a parameter interaction check instead a hard coded
value
0d91ae3 The first thing that SelectParams does is call SelectBaseParams. Therefore, we do not need to call SelectBaseParams immediately prior to calling SelectParams. (mruddy)
c8b115e travis: temporarily disable the forknotify test (Cory Fields)
1877390 depends: cleanup better after qt and force a bump (Cory Fields)
560e996 travis: attempt to fix unlikely build issue (Cory Fields)
This is a long chain of errors, and there are likely other changes that could
be made to cope in other places along that chain.
If depends don't build successfully, don't bother trying again for the sake of
better logging. That's likely to hurt more than help. In this case, qt build
failed, and on the second attempt, it appeared to be successful. However, due
to a bad object from an internal gcc error on the first build, the resulting
lib was unusable. This caused bitcoin-qt to not be built, and tests and
packaging which expected bitcoin-qt to be there failed.
The root cause:
Mingw is especially crashy when using -jX, likely compounded by low-memory
environments. I've seen multiple problems with this combo in Gitian as well.
In this case:
i686-w64-mingw32-g++: internal compiler error: Killed (program cc1plus)
...
make[3]: *** [.obj/release/qdrawhelper.o] Error 4
The workaround:
Bump Travis down to using -j2 by default. Additionaly, enable --with-gui for
the windows builds. This will cause configure to fail if qt is not working
while also testing the config flag.
Other failures which may be worth revisiting separately:
- If a depends package fails, maybe remove the workdir so that it doesn't taint
subsequent runs
- See if there's anything repeatable about the ICE when building qt
Previously transactions were only tested again the
STANDARD_SCRIPT_VERIFY_FLAGS prior to mempool acceptance, so any bugs in
those flags that allowed actually-invalid transactions to pass would
result in allowing invalid transactions into the mempool. Fortunately
there is a second check in CreateNewBlock() that would prevent those
transactions from being mined, resulting in an invalid block, however
this could still be exploited as a DoS attack.
This is a simplified re-do of closed pull #3088.
This patch eliminates the privacy and reliability problematic use
of centralized web services for discovering the node's addresses
for advertisement.
The Bitcoin protocol already allows your peers to tell you what
IP they think you have, but this data isn't trustworthy since
they could lie. So the challenge is using it without creating a
DOS vector.
To accomplish this we adopt an approach similar to the one used
by P2Pool: If we're announcing and don't have a better address
discovered (e.g. via UPNP) or configured we just announce to
each peer the address that peer told us. Since peers could
already replace, forge, or drop our address messages this cannot
create a new vulnerability... but if even one of our peers is
giving us a good address we'll eventually make a useful
advertisement.
We also may randomly use the peer-provided address for the
daily rebroadcast even if we otherwise have a seemingly routable
address, just in case we've been misconfigured (e.g. by UPNP).
To avoid privacy problems, we only do these things if discovery
is enabled.
We're using GetRandomBytes in several contexts where it's either
unwieldy to return an error, or an error would mean a fatal exception
anyhow.
@gmaxwell checked OpenSSL a while ago and discovered that it never
actually fails, but it can't hurt to be a bit paranoid here.
This is less surprising.
Avoids the overload-the-CPU default of using N threads for script
verification as well as N threads for generation where N is number of cores.
50b43fd Be a bit more verbose during -loadblock if we already have blocks (Matt Corallo)
8375e22 Fix -loadblock after shutdown during IBD (Matt Corallo)
4ead850 Fix for crash during block download (Matt Corallo)
tl;dr: This solves boost visibility problems for default/release build configs
on non-Linux platforms.
When Bitcoin builds against boost's header-only classes, it ends up with
objects containing symbols that the upstream boost libs also have. Since
Bitcoin builds by default with hidden symbol visibility, it can end up trying
to link against a copy of the same symbols with default visibility.
This is not a problem on Linux because 3rd party static libs are un-exported
by default (--exclude-libs,ALL), but that is not available for MinGW and OSX.
Those platforms (and maybe others?) end up confused about which version to use.
The OSX linker spews hundreds of: "ld: warning: direct access in <foo> to
global weak symbol guard variable for <bar> means the weak symbol cannot be
overridden at runtime. This was likely caused by different translation units
being compiled with different visibility settings."
MinGW's linker complains similarly.
Since the default symbol visibility for Bitcoin is hidden and releases are
built that way as well, build Boost with hidden visibility. Linux builds Boost
this way also, but only for the sake of continuity.
This means that the linker confusion logic is reversed, so the problem will
will now be encountered if Bitcoin is built with --disable-reduce-exports, but
that's better than the current situation.
Start the RPC server before doing all the (expensive) startup
initialisations like loading the block index. Until the node is ready,
return all calls immediately with a new error signalling "in warmup"
with an appropriate status message (similar to the init message).
This is useful for RPC clients to know that the server is there (e. g.,
they don't have to start it) but not yet available. It is used in
Namecoin and Huntercoin already for some time, and there exists a UI
hooked onto the RPC interface that actively uses this to its advantage.
1bea2bb Rename ProcessBlock to ProcessNewBlock to indicate change of behaviour, and document it (Luke Dashjr)
d29a291 Rename RPC_TRANSACTION_* errors to RPC_VERIFY_* and use RPC_VERIFY_ERROR for submitblock (Luke Dashjr)
f877aaa Bugfix: submitblock: Use a temporary CValidationState to determine accurately the outcome of ProcessBlock, now that it no longer does the full block validity check (Luke Dashjr)
24e8896 Add CValidationInterface::BlockChecked notification (Luke Dashjr)
2191eac add tests to travis (Cory Fields)
7667850 tests: replace the old (unused since Travis) tests with new rpc test scripts (Cory Fields)
fa7f8cd tests: remove old pull-tester scripts (Cory Fields)
5122ea7 tests: fix forknotify.py on windows (Cory Fields)
7a41614 tests: allow rpc-tests to get filenames for bitcoind and bitcoin-cli from the environment (Cory Fields)
f635269 tests: enable alertnotify test for Windows (Cory Fields)
484e350 Update comments in client version to be doxygen compatible (Michael Ford)
6395ba3 Update comments in version to be doxygen compatible (Michael Ford)
02fe12d Update generate-seeds.py to produce doxygen compatible comments (Michael Ford)
f2e03ff Update comments in chainparams to be doxygen compatible (Michael Ford)
2fdc335 Update comments in chain to be doxygen compatible (Michael Ford)
- guard 4 connect calls by an #ifdef when no wallet is loaded to fix "No
such slot" warnings
- also add comments when #ifdef ENABLE_WALLET end
- fixes#5175
Move transaction new/update notification to TransactionTableModel.
This moves the concerns to where they're actually handled.
No need to bounce this through wallet model.
- Do wallet transaction preprocessing on signal handler side;
avoids locking cs_main/cs_wallet on notification in GUI thread
(except for new transactions)
99f41b9 MOVEONLY: core.o -> core/block.o (jtimon)
561e9e9 MOVEONLY: Move script/compressor out of script and put CTxOutCompressor (from core) with it (jtimon)
999a2ab MOVEONLY: separate CTxUndo out of core (jtimon)
4a3587d MOVEONLY: Separate CTransaction and dependencies from core (jtimon)
eda3733 MOVEONLY: Move CFeeRate and Amount constants to amount.o (jtimon)
50f71cd boost: code movement only: split CECKey into separate files (Cory Fields)
bdaec6a boost: remove CPubKey dependency from CECKey. Follow-up of e405aa48 (Cory Fields)
Make the CBlockIndex* (optionally) returned by GetDepthInMainChain
const. This prevents accidental modification. The result is for
reading its properties rather than modifying it.
85c579e script: add a slew of includes all around and drop includes from script.h (Cory Fields)
db8eb54 script: move ToString and ValueString out of the header (Cory Fields)
e9ca428 script: add ToByteVector() for converting anything with begin/end (Cory Fields)
066e2a1 script: move CScriptID to standard.h and add a ctor for creating them from CScripts (Cory Fields)
a873823 CAutoFile: Explicit Get() and remove unused methods (Wladimir J. van der Laan)
fef24ca Add IsNull() to class CAutoFile and remove operator ! (Ruben Dario Ponticeli)
Bumps the OpenSSL version to the latest release, and kills SSL2. (SSL3 was already killed here, so I'm not sure why SSL2 was left around?)
No other changes.
This fixes an iterator leak resulting in
bitcoind: db/version_set.cc:789: leveldb::VersionSet::~VersionSet(): Assertion `dummy_versions_.next_ == &dummy_versions_' failed."
exception on shutdown.
Also make sure to flush pcoinsTip before calling GetStats() to make
sure we apply them to the current height.
c0195b1 Bugfix: Remove default from -zapwallettxes description (inaccurate) (Luke Dashjr)
0a08aa8 Parameterise command line option defaults, so translations are independent of them (Luke Dashjr)
d4746d5 Add a SECURE style flag for ThreadSafeMessageBox, which indicates that the message contains sensitive information. This keeps the message from being output to the debug log by bitcoind. Fixes a possible security risk when starting bitcoind in server mode without the 'rpcpassword' option configured, resulting in the "suggested" password being output to the debug log. (Mark Friedenbach)
This allows for a reversal of the current behavior.
This:
CScript foo;
CScriptID bar(foo.GetID());
Becomes:
CScript foo;
CScriptID bar(foo);
This way, CScript is no longer dependent on CScriptID or Hash();
5f4bcf6 boost: drop boost dependency in version.cpp. (Cory Fields)
352058e boost: drop boost dependency in utilstrencodings.cpp (Cory Fields)
e1c9467 boost: drop boost dependency in core.cpp (Cory Fields)
e405aa4 boost: remove CPrivKey dependency from CECKey (Cory Fields)
5295506 boost: drop dependency on tuple in serialization (Cory Fields)
1d9b86d boost: drop dependency on is_fundamental in serialization (Cory Fields)
There's only one case where a vector containing a fundamental type is
serialized all-at-once, unsigned char. Anything else would lead to
strange results.
Use a dummy argument to overload in that case.
Previous refactorings broke the ability to rebuild the chainstate by deleting the chainstate
directory, resulting in an incorrect "Incorrect or no genesis block found" error message. Fix
that.
Also, improve the performance of ActivateBestBlockStep by using the skiplist to only discover
a few potential blocks to connect at a time, instead of all blocks forever - as we likely bail
out after connecting a single one anyway.
Instead of skipping to the last reindexed block in each file (which could
jump over processed out-of-order blocks), just skip each already processed
block individually.
Remember out-of-order block headers along with disk positions. This is
likely the simplest and least-impact way to make -reindex work with
headers first.
Based on top of #4468.
Many changes:
* Do not use 'getblocks', but 'getheaders', and use it to build a headers tree.
* Blocks are fetched in parallel from all available outbound peers, using a
limited moving window. When one peer stalls the movement of the window, it is
disconnected.
* No more orphan blocks. At all. We only ever request a block for which we have
verified the headers, and store it to disk immediately. This means that a
disk-fill attack would require PoW.
* Require protocol version 31800 for every peer (released in december 2010).
* No more syncnode (we sync from everyone we can, though limited to 1 during
initial *headers* sync).
* Introduce some extra named constants, comments and asserts.
Similar to the INCLUDES changes in 6b099402b4, split out LIBS into individual
entries for more fine-grained control.
Also add MINIUPNPC_LIBS which was missing before, and hook it up to
executables.
d5fd094 build: fix qt test build when libprotobuf is in a non-standard path (Cory Fields)
a7d1f03 build: fix dynamic boost check when --with-boost= is used (Cory Fields)
There's a brief race here, the process might've already exited and cleaned up
after itself. If that's the case, reading from the pidfile will harmlessly
fail. Keep those quiet.
6fd546d Remove CChainParams::NetworkID() (jtimon)
cc97210 Add fTestnetToBeDeprecatedFieldRPC to CChainParams (jtimon)
e11712d Move checkpoint data selection to chainparams (jtimon)
6de50c3 qt: add network-specific style object (Wladimir J. van der Laan)
Mainly cleanups: Gets rid of isTestNet everywhere, by keeping track
of network-specific theming in a central place.
Also makes GUI no longer dependent on the network ID enumeration, which
alleviates concerns about #4802.
This adds a -regetest-only undocumented (for regression testing only)
command-line option -blockversion=N to set block.nVersion.
Adds to the "has the rest of the network upgraded to a
block.nVersion we don't understand" code so it calls
-alertnotify when 51 of the last 100 blocks are up-version.
But it only alerts once, not with every subsequent new, upversion
block.
And adds a forknotify.py regression test to make sure it works.
Tested using forknotify.py:
Before adding CAlert::Notify, get:
Assertion failed: -alertnotify did not warn of up-version blocks
Before adding code to only alert once:
Assertion failed: -alertnotify excessive warning of up-version blocks
After final code in this pull:
Tests successful
d0c4197 change exit(1) to an assert in CWallet::EncryptWallet (Philip Kaufmann)
870da77 fix possible memory leaks in CWallet::EncryptWallet (Philip Kaufmann)
f606bb9 fix a possible memory leak in CWalletDB::Recover (Philip Kaufmann)
* Delete canonical_tests.cpp, and move the tests to script_tests.cpp.
* Split off SCRIPT_VERIFY_DERSIG from SCRIPT_VERIFY_STRICTENC (the BIP62 part of it).
* Change signature STRICTENC/DERSIG semantics to fail the script entirely rather than the CHECKSIG result (softfork safety, and BIP62 requirement).
* Add many autogenerated tests for several odd cases.
* Mention specific BIP62 rules in the script verification flags.
7c70438 Get rid of the dummy CCoinsViewCache constructor arg (Pieter Wuille)
ed27e53 Add coins_tests with a large randomized CCoinViewCache test. (Pieter Wuille)
058b08c Do not keep fully spent but unwritten CCoins entries cached. (Pieter Wuille)
c9d1a81 Get rid of CCoinsView's SetCoins and SetBestBlock. (Pieter Wuille)
f28aec0 Use ModifyCoins instead of mutable GetCoins. (Pieter Wuille)
0b17964 Bugfix: Replace bashisms with standard sh in tests/tools (Luke Dashjr)
ab72068 Bugfix: Replace bashisms with standard sh in gitian descriptors (Luke Dashjr)
b77b4ed Bugfix: Replace bashisms with standard sh to fix build on non-BASH systems (Luke Dashjr)
d6b0539 travis: add non-default shell testing to travis. (Cory Fields)
Make it possible to read blocks in any order. This will be required
after headers-first (#4468), so should be merged before that.
- Read block header. For expected blocks, continue, else skip.
- For in-order blocks: copy block contents directly. Write prior
out-of-order blocks if this connects a consecutive span.
- For out-of-order blocks, store extents of block data for later
retrieval. Cache out-of-order blocks in memory up to 100MB
(configurable).
e790c37 Replace SCRIPT_VERIFY_NOCACHE by flag directly to checker (Pieter Wuille)
5c1e798 Make signature cache optional (Pieter Wuille)
c7829ea Abstract out SignatureChecker (Pieter Wuille)
938bcce CAutoFile: make file private (Philip Kaufmann)
0c35486 CBufferedFile: add explicit close function (Philip Kaufmann)
c9fb27d CBufferedFile: convert into a non-refcounted RAII wrapper (Philip Kaufmann)
There is only one message passed to AbortNode() that makes sense to
translate to the user specifically: Disk space is low. For the others
show a generic message and refer to debug.log for details.
Reduces the number of confusing jargon translation messages.
Newer mingw supports the features necessary to enable this api, whereas older
versions didn't. However once enabled (automatically by configure), it triggers
an unrelated build bug.
Since it was not enabled previously anyway, and we don't depend on the
functionality, just disable it across the board.
fbd36d8 Avoid introducing a virtual into CChainParams (Wladimir J. van der Laan)
f0fd00c Switch testing framework from MAIN to new UNITTEST network (SergioDemianLerner)
- it now takes over the passed file descriptor and closes it in the
destructor
- this fixes a leak in LoadExternalBlockFile(), where an exception could
cause the file to not getting closed
- disallow copies (like recently added for CAutoFile)
- make nType and nVersion private
4705902 Avoid introducing a virtual into CChainParams (Wladimir J. van der Laan)
5e2e7fc Suggested corrections on comments, variable names. Also new test case testing the PoW skip in UNITTEST. (SergioDemianLerner)
a25fd6b Switch testing framework from MAIN to new UNITTEST network (SergioDemianLerner)
f74fc9b Print input index when signature validation fails, to aid debugging. (Mark Friedenbach)
217a5c9 When transaction outputs exceed inputs, show the offending amounts so as to aid debugging. (Mark Friedenbach)
Qt5 is bottled, so configure won't find it without some help. Use
brew to find out its prefix.
Also, qt5 added the host_bins variable to pkg-config, use it.
The entire debug log would be huge, and could cause issues for automated tools
like travis. Printing 200 lines is an initial guess at a reasonable number,
more may be required.
Code signing failed for me on OSX 10.9.5 because the
Versions/Current symbolic links were being replaced
with a duplicate copy of the frameworks' code.
Releases were bigger than they needed to be, for the
same reason.
- add missing deletes for pwalletdbEncryption
- add an assert before trying to reserve memory for pwalletdbEncryption
- add a destructor to CWallet, which ensures deletion of
pwalletdbEncryption on object destruction
Windows needed a few fixups to get the tests running:
1. bitcoin-tx needs a file extension in Windows. Take this opportunity to
add an env file, which pulls variables out of our build config. This can
be extended as needed, for now it's very simple.
2. After #1, split the args out of the exec key in the test data.
3. Correct the line-endings from windows stdout
The approach from 65f3fa8d1 worked for signing on 10.9.4, but not newer
versions. 10.9.5 (and up) want each framework to stand alone.
Now in addition to copying the plist's from Qt for each framework, we put them
in per-version dirs and only symlink to the latest, rather than using symlinks
for any contents.
93e24dd travis: use debug for one build (Cory Fields)
be6d87a script: don't read past the end (Cory Fields)
a94496f tests: don't split an empty string (Cory Fields)
00522cd depends: disable reduced exports for debug builds (Cory Fields)
1f7fff2 depends: add docs for debug (Cory Fields)
dc66ff5 depends: make LDFLAGS act like the other flags (Cory Fields)
b1efba8 depends: give miniupnpc cppflags (Cory Fields)
1d154db depends: teach qt to honor debug/release (Cory Fields)
3b63df5 depends: boost: build for debug or release as requested (Cory Fields)
7e99df7 depends: make sure openssl sees cppflags (Cory Fields)
f397304 depends: add debug/release flags for linux/osx/win (Cory Fields)
2027ad3 depends: add the debug/release concept to depends (Cory Fields)
One might assume that CAutoFile would be ref-counted so that a copied object
would delay closing the underlying file until all copies have gone out of
scope. Since that's not the case with CAutoFile, explicitly disable copying.
For the all-off build, enable the wallet and debug. This ensures that debug
options will catch wallet problems as well.
In order to make sure the no-wallet path is still tested, disable the wallet
in the other x86_64 build.
- explicit init of pcoinsdbview and pwalletMain (even if not needed, as
globals are init to NULL, it seems cleaner)
- remove check if (pwalletMain) in Shutdown() as delete is valid even if
pwalletMain is NULL
Move the txid duplicates check into BuildMerkleTree, where it can be done
much more efficiently (without needing to build a full txid set to detect
duplicates).
The previous version (using the std::set<uint256> to detect duplicates) was
also slightly too weak. A block mined with actual duplicate transactions
(which is invalid, due to the inputs of the duplicated transactions being
seen as double spends) would trigger the duplicates logic, resulting in the
block not being stored on disk, and rerequested. This change fixes that by
only triggering in the case of duplicated transactions that can actually
result in an identical merkle root.
Instead of storing CCoins entries directly in CCoinsMap, store a CCoinsCacheEntry
which additionally keeps track of whether a particular entry is:
* dirty: potentially different from its parent view.
* fresh: the parent view is known to not have a non-pruned version.
This allows us to skip non-dirty cache entries when pushing batches of changes up,
and to remove CCoins entries about transactions that are fully spent before the
parent cache learns about them.
All direct modifications are now done through ModifyCoins, and BatchWrite is
used for pushing batches of queued modifications up, so we don't need the
low-level SetCoins and SetBestBlock anymore in the top-level CCoinsView class.
Replace the mutable non-copying GetCoins method with a ModifyCoins, which
returns an encapsulated iterator, so we can keep track of concurrent
modifications (as iterators can be invalidated by those) and run cleanup
code after a modification is finished.
This also removes the overloading of the 'GetCoins' name.
It's strange to be able to close these windows while there is work
in progress.
Also set Qt::WA_DeleteOnClose on both windows to make sure that they
are deleted eventually, no matter what happens.
Lots of people read the Bitcoin Core codebase to learn more about
crypto; better to warn about flaws explicitly so they don't blindly copy
the code for other uses and create broken systems.
Always make a pid file, not only when `-daemon` specified.
This is useful for troubleshooting, for attaching debuggers and loggers
and such.
- Write the pid file only after the datadir lock was acquired
- Don't create or remove a pid file on WIN32, and also don't show the option
bbad683 [Qt] simplify return code and return values in txtablemodel (Philip Kaufmann)
21f1516 [Qt] add all used colors in txtablemodel to guiconstants (Philip Kaufmann)
- Remove spurious `pchCommand[1] = 1` in CMessageHeader()
- Make sure that pchCommand is zero-padded if length is shorter than
COMMAND_SIZE
- Use strnlen to determine length of pcmCommand in GetCommand
93f84d0 cleanup class private and public areas in walletdb (Philip Kaufmann)
22d7e70 prefer const string& over char* in CDB and CWalletDB constructor (Philip Kaufmann)
There is no reason to store thousands of orphan transactions;
normally an orphan's parents will either be broadcast or
mined reasonably quickly.
This pull drops the maximum number of orphans from 10,000 down
to 100, and adds a command-line option (-maxorphantx) that is
just like -maxorphanblocks to override the default.
Prevent denial-of-service attacks by banning
peers that send us invalid orphan transactions
and only storing orphan transactions given to
us by a peer while the peer is connected.
Flushing after every line when printing to console is desirable when
running with systemd but setvbuf() has slightly different semantics
on Windows that causes warnings. Just do an explicit fflush() after
each line print to console instead.
Avoids that SOCKS5 negotiation will hold up the shutdown process.
- Sockets can stay in non-blocking mode, no need to switch it on/off
anymore
- Adds a timeout (20 seconds) on SOCK5 negotiation. This should be
enough for even Tor to get a connection to a hidden service, and
avoids blocking the opencon thread indefinitely on a hanging proxy.
Fixes#2954.
2c2cc5d Remove some unnecessary c_strs() in logging and the GUI (Philip Kaufmann)
f7d0a86 netbase: Use .data() instead of .c_str() on binary string (Wladimir J. van der Laan)
e088d65 Separate script/sign (jtimon)
9294a4b Separate CScriptCompressor (jtimon)
c4408a6 Separate script/standard (jtimon)
da03e6e Separate script/interpreter (jtimon)
cbd22a5 Move CScript class and dependencies to script/script (jtimon)
86dbeea Rename script.h/.cpp to scriptutils.h/.cpp (plus remove duplicated includes) (jtimon)
Rebased-by: Pieter Wuille
It runs sipas crawler, but rather than using its custom nameserver implementation it serves a generated zonefile via bind9. The zone always contains 25 IPv4 and 25 IPv6 peers. FWIW, the zone is secured using DNSSEC.
- also fixes indentation in one file (auto fixed by Qt Designer)
- removes several default parameters, which are not needed in the files
- related to #4840 (but not intended as fix for a no-bug)
1e4f87f Use memcmp for uint256 equality/inequality (Pieter Wuille)
8a41e1e Use boost::unordered_map for mapBlockIndex (Pieter Wuille)
145d5be Introduce BlockMap type for mapBlockIndex (Pieter Wuille)
a0dbe43 checkpoints.cpp depends on main, it can use mapBlockIndex directly (Pieter Wuille)
Some sources are renamed after download, since the filenames don't play nice
with (for example) gitian. This fixes the rename.
Needed for OSX build as it renames a file.
399cdbc contrib/linearize: Add feature to set file's timestamp based on block header time. (Jeff Garzik)
8f5a423 contrib/linearize: split block files based on year-month, not just year (Jeff Garzik)
75400a2 contrib/linearize: Guarantee that output is generated in-order (Jeff Garzik)
The efficient version of CCoinsViewCache::GetCoins only works for known-to-exist
cache entries, requiring a separate HaveCoins call beforehand. This is
inefficient as both perform a hashtable lookup.
Replace the non-mutable GetCoins with AccessCoins, which returns a potentially-NULL
pointer. This also decreases the overloading of GetCoins.
Also replace some copying (inefficient) GetCoins calls with equivalent AccessCoins,
decreasing the copying.
b144a74 depends: bump miniupnpc to 1.9.20140701. (Cory Fields)
f628127 depends: bump openssl to 1.0.1i (Cory Fields)
9f7f504 build: add -DMINIUPNP_STATICLIB for new version (Cory Fields)
6f5d33b Update translations after update script improvements (Wladimir J. van der Laan)
da59f28 Add deeper XML checking to update-translation script (Wladimir J. van der Laan)
- Catch problems such as mismatched formatting characters. Remove
messages that can give problems at runtime.
- Also remove unfinished/untranslated messages, they just take up space
in the ts and waste parsing time.
Fixes#4774.
Thanks to Pieter Wuille for most of the work on this commit.
I did not fixup the overhaul commit, because a rebase conflicted
with "remove fields of ser_streamplaceholder".
I prefer not to risk making a mistake while resolving it.
The nType and nVersion fields of stream objects are never accessed
from outside the class (or perhaps from the inside too, I haven't checked).
Thus no need to have them in a placeholder, whose only purpose is to
fill the "Stream" template parameter in serialization implementation.
The implementation of each class' serialization/deserialization is no longer
passed within a macro. The implementation now lies within a template of form:
template <typename T, typename Stream, typename Operation>
inline static size_t SerializationOp(T thisPtr, Stream& s, Operation ser_action, int nType, int nVersion) {
size_t nSerSize = 0;
/* CODE */
return nSerSize;
}
In cases when codepath should depend on whether or not we are just deserializing
(old fGetSize, fWrite, fRead flags) an additional clause can be used:
bool fRead = boost::is_same<Operation, CSerActionUnserialize>();
The IMPLEMENT_SERIALIZE macro will now be a freestanding clause added within
class' body (similiar to Qt's Q_OBJECT) to implement GetSerializeSize,
Serialize and Unserialize. These are now wrappers around
the "SerializationOp" template.
The case SetMerkleBranch(NULL) was never actually used, and thus the
involved code (loading the block from disk) can be removed and the
implementation simplified.
It's only confusing people into thinking that they should mess with
boost versions, which should not be necessary to get bitcoind to work.
If there is a bug in the build system with autodetecting boost it needs
to be solved not worked around.
- ensures a consistent usage in header files
- also add a blank line after the copyright header where missing
- also remove orphan new-lines at the end of some files
Needed to build breakage reported by Arnavion on IRC:
qt/splashscreen.cpp: In constructor 'SplashScreen::SplashScreen(const QPixmap&, Qt::WindowFlags, bool)':
qt/splashscreen.cpp:33:98: error: 'FormatFullVersion' was not declared in this scope
Bypassing the main coins cache allows more thorough checking with the same
memory budget.
This has no effect on performance because everything ends up in the child
cache created by VerifyDB itself.
It has bugged me ever since #4675, which effectively reduced the
number of checked blocks to reduce peak memory usage.
- Pass the coinsview to use as argument to VerifyDB
- This also avoids that the first `pcoinsTip->Flush()` after VerifyDB
writes a large slew of unchanged coin records back to the database.
libminiupnpc changed their required static define to the much more sane
"MINIUPNP_STATICLIB". Sadly, they don't respect the old "STATICLIB" for
back-compat. Define them both since the old one didn't seem to be conflicting
anywhere.
Also go ahead and split out the cppflags so that they can be applied only where
they're needed. This will help us to build dll's from our libs without having
their import/export declspecs poisoned.
b197bf3 [Qt] disable tray interactions when client model set to 0 (Philip Kaufmann)
314fbd9 [Qt] use BitcoinGUI::DEFAULT_WALLET constant in bitcoin.cpp (Philip Kaufmann)
8ca6a16 [Qt] ensure all class attributes are init to 0 (Philip Kaufmann)
ad49c25 Split up util.cpp/h (Wladimir J. van der Laan)
f841aa2 Move `COIN` and `CENT` to core.h (Wladimir J. van der Laan)
6e5fd00 Move `*Version()` functions to version.h/cpp (Wladimir J. van der Laan)
b4aa769 Move `S_I*` constants and `MSG_NOSIGNAL` to compat.h (Wladimir J. van der Laan)
af8297c Move functions in wallet.h to implementation file (Wladimir J. van der Laan)
651480c move functions in main and net to implementation files (Wladimir J. van der Laan)
610a8c0 Move SetThreadPriority implementation to util.cpp instead of the header (Wladimir J. van der Laan)
f780e65 Remove unused function `ByteReverse` from util.h (Wladimir J. van der Laan)
121d6ad Remove unused `alignup` function from util.h (Wladimir J. van der Laan)
d1e26d4 Move CMedianFilter to timedata.cpp (Wladimir J. van der Laan)
d0867ac Use const CCoinsView's at some places. (Daniel Kraft)
a3dc587 Make appropriate getter-routines "const" in CCoinsView. (Daniel Kraft)
ffb4c21 Mark LevelDB "Read" and "Exists" functions as const. (Daniel Kraft)
Split up util.cpp/h into:
- string utilities (hex, base32, base64): no internal dependencies, no dependency on boost (apart from foreach)
- money utilities (parsesmoney, formatmoney)
- time utilities (gettime*, sleep, format date):
- and the rest (logging, argument parsing, config file parsing)
The latter is basically the environment and OS handling,
and is stripped of all utility functions, so we may want to
rename it to something else than util.cpp/h for clarity (Matt suggested
osinterface).
Breaks dependency of sha256.cpp on all the things pulled in by util.
This was typically ensured implicitly by virtue of normal bitcoind
operation. Adding an explicit check provides a stronger guarantee, and
it is cheap to add.
Break into two steps:
* Generate hash list
* Build data file(s) from local bitcoind blocks/ directory.
This supports building one large bootstrap.dat, or multiple
smaller blocks/blkNNNNN.dat files.
Starting with 10.9, Framework versions must be signed individually, rather
than as a single bundle version, in order to be properly codesigned. This
change ensures that the proper plist files and symlinks are present prior to
packaging.
When using clang and ccache, builds spew lots of:
Clang: warning: argument unused during compilation
Upstream bug: https://bugzilla.samba.org/show_bug.cgi?id=8118
This is harmless, bug annoying. If ccache is being used and the
-Qunused-arguments flag is supported (clang), use it.
3802224 Remove all other print() methods (Wladimir J. van der Laan)
9b6d4c5 Move strprintf define to tinyformat.h (Wladimir J. van der Laan)
8121258 Remove print() from core functions (Wladimir J. van der Laan)
The homebrew instructions were outdated - berkeley-db4 hasn't worked for months, based on the questions I'm seeing on Google/SO. So I added a section explaining how to install berkeley-db4 using homebrew and move on with your life. Thanks for the rest of the documentation!
Running git version 2.1.0 on OSX (homebrew), I get
fatal: '1q': not a non-negative integer
I'm guessing git command-line parsing got more strict recently?
This was committed previously as 4975ae172 and reverted, because the flags were
applied even if the checks didn't pass. This is the same commit, fixed up to
actually disable the functionality when necessary.
Enabled automatically if boost >= 1.49.
See: https://svn.boost.org/trac/boost/ticket/2309
Also, check for a default visibility attribute, so that we can mark future
api functions correctly.
Thus the read(...) and write(...) methods of all stream classes now have identical parameter lists.
This will bring these classes one step closer to a common interface.
No need to waste startup time building something that can be done
at compile time.
This also resolves a clang++ warning originally reported in #4714,
univalue/univalue_write.cpp:33:12: warning: array subscript is of type 'char
escapes['"'] = "\\"";
^~~~
etc.
aa82795 Add detailed network info to getnetworkinfo RPC (Wladimir J. van der Laan)
075cf49 Add GetNetworkName function (Wladimir J. van der Laan)
c91a947 Add IsReachable(net) function (Wladimir J. van der Laan)
60dc8e4 Allow -onlynet=onion to be used (Wladimir J. van der Laan)
This commit adds per-network information to the
getnetworkinfo RPC call:
- Is the network limited?
- Is the network reachable
- Which proxy is used for this network, if any
Inspired by #2575.
Bitcoin core should work with any remotely recent boost version
if a proper build environment is present. Remove a confusing comment
from the build documentation.
This number was still tracked even though it's shown nowhere in the UI
anymore. It was originally removed because it didn't match the actual number of
records in the view (which contains outputs, not transactions) thus was
confusing people.
This corrects a bug where an exception thrown reading from the database causes the cursor to
be left open, which causes an assertion error to occur when the database is deleted (around
line 938 of init.cpp).
Enabled automatically if boost >= 1.49.
See: https://svn.boost.org/trac/boost/ticket/2309
Also, check for a default visibility attribute, so that we can mark future
api functions correctly.
When the libpath doesn't line up with the value from config.sub, we don't find
the correct path to boost's libs. This adds a hack to try another path before
giving up.
Should close#3219.
While we're at it, reduce the use of LIBS as well. This makes dependencies
explicit.
Fixes building with (the not-yet-merged) libsecp256k1 as well.
Github-Pull: #4689
Rebased-By: Wladimir J. van der laan <laanwj@gmail.com>
Rebased-From: 909b347c0e5dda
Due to growing coinsviewcaches, the memory usage with checklevel=3
(and standard settings for dbcache) could be up to 500MiB on a
64-bit system. This is about twice the peak during reindexing,
unnecessarily extending bitcoind's memory envelope.
This commit reduces the maximum total size of the caches used during
verification to just nCoinCacheSize, which should be the limit.
CCryptoKeyStore::Unlock has a loop to attempt decrypting each key which
only executes once, likely due to a simple mistake when the code was
originally written.
This patch fixes the behavior by making it check all keys. It also adds
a fatal assertion in the case some decrypt but some do not, since that
indicates that the wallet is in some kind of really bad state.
This may make unlocking noticeably slower on wallets with many keys.
Remove the 'state' and 'exceptmask' from serialize.h's stream implementations,
as well as related methods.
As exceptmask always included 'failbit', and setstate was always called with
bits = failbit, all it did was immediately raise an exception. Get rid of
those variables, and replace the setstate with direct exception throwing
(which also removes some dead code).
As a result, good() is never reached after a failure (there are only 2
calls, one of which is in tests), and can just be replaced by !eof().
fail(), clear(n) and exceptions() are just never called. Delete them.
- this prevents the ability to fiddle around with the system tray when
already shutting down (e.g. on slow shutdowns because of a proxy delay)
- extends solution for #4360
- ensure normal and watch-only stuff looks consistent
- simplify UI by removing unneeded UI layout elements
- change some comments to watch-only from watchonly
6b271a3 build: fix race in 'make deploy' for windows (Cory Fields)
d343460 build: Fix 'make deploy' when binaries haven't been built yet (Cory Fields)
206a7f9 build: hook up qt translations for static osx packaging (Cory Fields)
d597219 build: add --with-qt-translationdir to configure for use with static qt (Cory Fields)
71941ce build: teach macdeploy the -translations-dir argument, for use with static qt (Cory Fields)
f8120f7 build: Find the proper xcb/pcre dependencies (Cory Fields)
eccd585 build: silence mingw fpic warning spew (Cory Fields)
a98356f build: don't let libtool insert rpath into binaries (Cory Fields)
It currently returns uint64_t, which on older boost (at least 1.46) causes
test failures on 32-bit systems.
This problem was introduced in bc42503.
Fixes#4634.
When QT is linked statically, macdeploy can't infer its paths. While plugins
and frameworks don't need to be packaged, translations still do (for now).
The size limit makes a lot of sense for the server, as it never has to
accept very large data.
The client, however, can request arbitrary amounts of data with
`listtransactions` on a large wallet.
Fixes#4604.
Split up HTTPReply into HTTPReply and HTTPReplyHeader, so that
the message data can be streamed directly.
Also removes a c_str(), which would have prevented binary
output with NUL characters in it.
The only other method of logging remote addresses is via
-logips=1 -debug=net
which increases the logged activity by 100x or more.
Github-Pull: #4608
Amended-By: Wladimir J. van der Laan <laanwj@gmail.com>
e59441f Process fee estimate file into temporary vector first to let sanity checking complete. (Alex Morcos)
961ae93 Fix minor bug which only affected log messages. (Alex Morcos)
17f1567 Fixed a bug with index bounds checking (Alex Morcos)
- remove starting height as table header and replace with ping time
- remove columnResizingFixer
- add local address (if available) in detailed node view (on top of the
right view below the remote address)
- remove some .c_str() by using QString::fromStdString()
- rename Address to Address/Hostname
- rename secs to just s for ping time
- use MODEL_UPDATE_DELAY from guiconstants.h for the peer refresh time
- make PeerTableModel::columnCount() return no hard-coded value
- remove and cleanup dup private: section in RPCConsole header
- add new defaults for column sizes
- remove behaviour which keeps disconnected peers selected and also remove
code which keeps track of last selected peer stats
- add sync height to detail view
- add some additional NULL pointer checks for clientModel in
rpcconsole.cpp
Port over https://github.com/chronokings/huntercoin/pull/19 from
Huntercoin: This implements a new RPC command "getchaintips" that can be
used to find all currently active chain heads. This is similar to the
-printblocktree startup option, but it can be used without restarting
just via the RPC interface on a running daemon.
This makes it possible for a node with `-onlynet=tor` to bootstrap
itself.
It also adds the base infrastructure for adding IPv6 seed nodes.
Also represent IPv4 fixed seed addresses in 16-byte format.
- error: 'vector' in namespace 'std' does not name a type
- add <vector> include in core_io.h
- remove <vector> includes from core_read.cpp and core_write.cpp
d2d9dc0 script tests: add tests for CHECKMULTISIG limits (Otto Allmendinger)
89101c6 script test: test case for 5-byte bools (Otto Allmendinger)
4cac5db script tests: value with trailing 0x00 is true (Otto Allmendinger)
833ff16 script tests: values that overflow to 0 are true (Otto Allmendinger)
0072d98 script tests: BOOLAND, BOOLOR decode to integer (Otto Allmendinger)
ed02282 additional test for OP_SIZE in script_valid.json (Otto Allmendinger)
This is a simple utility that provides command line manipulation of
a hex-encoded TX. The utility takes a hex string on the command line
as input, performs zero or more mutations, and outputs a hex string
to standard output.
This utility is also an intentional exercise of the "bitcoin library"
concept. It is designed to require minimal libraries, and works
entirely without need for any RPC or P2P communication.
See "bitcoin-tx --help" for command and options summary.
As the `getwork` API doesn't exist anymore, currently this script is useless.
It would be nice to have a `getblocktemplate`-based Python example of a
miner, but there is no point in keeping this one around except to
confuse people.
Anyone building bitcoind/-qt on windows is welcome to contribute
a new one. The current information in this document is outdated,
or otherwise mostly worthless.
* Replace -benchmark (and the related fBenchmark) with a regular debug option, -debug=bench.
* Increase coverage and granularity of individual block processing steps.
* Add cummulative times.
29eaa31 ui: Make sure sendcoinsentry signals only connected once (Wladimir J. van der Laan)
2a05101 qt: Remove unused functions from BitcoinUnits (Wladimir J. van der Laan)
91cce17 qt: Use fixed-point arithmetic in amount spinbox (Wladimir J. van der Laan)
Fixes various issues and cleans up code
- Fixes issue #4500: Amount widget +/- has floating point rounding artifacts
- Amount box can now be emptied again, without clearing to 0
Also aligns the amount to the right, as in other places.
If clock_gettime is implemented outside of libc (librt in this case), configure
would fail when testing boost. Since clock_gettime is not present on all OSs,
boost only uses it when it can. Check for it in librt and add it to LIBS if
found, but don't fail if it's not (since boost won't be expecting it in this
case).
Also, reverse the link order as necessary for static libs.
Note that it's possible that there are other similar cases for boost, which may
be handled the same way.
8f3f94a Revert "CBloomFilter::clear() method" (Wladimir J. van der Laan)
98e84aa Revert "Relay double-spends, subject to anti-DOS" (Wladimir J. van der Laan)
3015e0b Revert "UI to alert of respend attempt affecting wallet." (Wladimir J. van der Laan)
39d3f2c Revert "Add -respendnotify option and new RPC data" (Wladimir J. van der Laan)
680f725 Revert "Add release notes entry" (Wladimir J. van der Laan)
ad26dc9 Revert "Formatting, spelling, comment fixes." (Wladimir J. van der Laan)
cd057bf Revert "Check signatures before respend relay" (Wladimir J. van der Laan)
67cc8f2 Revert "Remove signal DoubleSpendDetected, use function" (Wladimir J. van der Laan)
First and foremost, this defaults to OFF.
This option lets a node consider such transactions non-standard,
meaning they will not be relayed or mined by default, but other miners
are free to mine these as usual.
7149499 Add comments re BitcoinUnits::formatWithUnit/formatHtmlWithUnit (Roy Badami)
f7d70c6 Remove unused fAlign argument from BitcoinUnits::format and friends (Roy Badami)
2e4fee2 Show bitcoin quantities with full precision, even in the presence of trailing zeros (Roy Badami)
7007402 Implement SI-style (thin space) thoudands separator (Roy Badami)
This is the first part of a huge effort to rework the handling of dependencies.
To start, this change allows all supported platforms to build against a static
Qt. 5.2.1 and 5.3 have been successfully tested against osx64, win32, win64,
linux32, and linux64.
It also makes a small change to the windows config, to allow linking against
qt builds with or without built-in libjpeg/libpng/libpcre/libz.
The actual build processes to take advantage of these changes (for gitian and
pull-tester) are coming soon. Until then, this should be a no-op.
- the call to CloseSocket() is placed after the WSAGetLastError(), because
a CloseSocket() can trigger an error also, which we don't want for the
logging in this two cases
Simpler alternative to #4348.
The current setup with closesocket() is strange. It poses
as a compatibility wrapper but adds functionality.
Rename it and make it a documented utility function in netbase.
Code movement only, zero effect on the functionality.
33357b2 qt: Start core thread only when needed (Wladimir J. van der Laan)
c715ff5 ui: Replace some LogPrintfs with qDebug() (Wladimir J. van der Laan)
96ff9d6 Can't log to debug log before chain params initialized (Wladimir J. van der Laan)
Block 295,000 seems to meet the criteria of a reasonable timestamp and
no strange transactions. 295,000 is the current block height in the
bootstrap.dat torrent provided by jgarzik.
Start the core thread only when needed for initialization
or shutdown.
Avoids a bit of overhead, and also avoids spamming two
log messages before logging is properly initialized.
Add a function `AreBaseParamsConfigured` and use this to check
before writing to the debug log. This avoids assertions when the
application happens to log too early, which happens in the GUI.
Messages logged before the base parameters are configured can be
shown using `-printtoconsole`.
The option is only effective for either wallet-less builds or if
-disablewallet is specified as well.
Rebased-By: Wladimir J. van der Laan <laanwj@gmail.com>
Rebased-From: 34d5fc04e1a196bd4307bd53a33b7e09b36
Github-Pull: #4286
4eedf4f make RandAddSeed() use OPENSSL_cleanse() (Philip Kaufmann)
6354935 move rand functions from util to new random.h/.cpp (Philip Kaufmann)
001a53d add GetRandBytes() as wrapper for RAND_bytes() (Philip Kaufmann)
The regtest framework is local, so often there is no need to
discover our external IP. Setting -discover=0 in util.py works
around shutdown hang caused by GetExternalIP waiting in recv().
An user on IRC reported an issue where `getrawchangeaddress`
keeps returning a single address when the keypool is exhausted.
In my opinion this is strange behaviour.
- Change CReserveKey to fail when running out of keys in the keypool.
- Make `getrawchangeaddress` return RPC_WALLET_KEYPOOL_RAN_OUT when
unable to create an address.
- Add a Python RPC test for checking the keypool behaviour in combination
with encrypted wallets.
This removes some inconsistencies in what worked and didn't work in
safemode. Now only RPCs involved in getting balances or sending
funds are disabled.
Previously you could mine but not submit blocks— but we may need more
blocks to resolve a fork that triggered safe mode in the first place,
and the non-submission was not reliable since some miners submit
blocks via multiple means. There were also a number of random commands
disabled that had nothing to do with the blockchain like verifymessage.
Thanks to earlz for pointing out that there were some moderately cheap
ways to maliciously trigger safe mode, which brought attention to
the fact that safemode wasn't used in a very intelligent way.
This adds a -whitelist option to specify subnet ranges from which peers
that connect are whitelisted. In addition, there is a -whitebind option
which works like -bind, except peers connecting to it are also
whitelisted (allowing a separate listen port for trusted connections).
Being whitelisted has two effects (for now):
* They are immune to DoS disconnection/banning.
* Transactions they broadcast (which are valid) are always relayed,
even if they were already in the mempool. This means that a node
can function as a gateway for a local network, and that rebroadcasts
from the local network will work as expected.
Whitelisting replaces the magic exemption localhost had for DoS
disconnection (local addresses are still never banned, though), which
implied hidden service connects (from a localhost Tor node) were
incorrectly immune to DoS disconnection as well. This old
behaviour is removed for that reason, but can be restored using
-whitelist=127.0.0.1 or -whitelist=::1 can be specified. -whitebind
is safer to use in case non-trusted localhost connections are expected
(like hidden services).
- add a small wrapper in util around RAND_bytes() and replace with
GetRandBytes() in the code to log errors from calling RAND_bytes()
- remove OpenSSL header rand.h where no longer needed
- small changes to Shutdown(), buffer __func__, which is now used in
all LogPrintf() calls and format for better readability
- order using namespace alpabetically
a3e192a replaced MINE_ with ISMINE_ (JaSK)
53a2148 fixed bug where validateaddress doesn't display information (JaSK)
f28707a fixed bug in ListReceived() (JaSK)
519dd1c Added MINE_ALL = (spendable|watchonly) (JaSK)
23b0506 Fixed some stuff in TransactionDesc (JaSK)
80dda36 removed default argument values for ismine filter (JaSK)
d5087d1 Use script matching rather than destination matching for watch-only. (Pieter Wuille)
0fa2f88 added includedWatchonly argument to listreceivedbyaddress/...account (JaSK)
f87ba3d added includeWatchonly argument to 'gettransaction' because it affects balance calculation (JaSK)
a5c6c5d fixed tiny glitch and improved readability like laanwj suggested (JaSK)
d7d5d23 Added argument to listtransactions and listsinceblock to include watchonly addresses (JaSK)
952877e Showing 'involvesWatchonly' property for transactions returned by 'listtransactions' and 'listsinceblock'. It is only appended when the transaction involves a watchonly address. (JaSK)
83f3543 Added argument to listaccounts to include watchonly addresses (JaSK)
d4640d7 Added argument to getbalance to include watchonly addresses and fixed errors in balance calculation. (JaSK)
d2692f6 Watchonly transactions are marked in transaction history (JaSK)
ffd40da Watchonly balances are shown separately in gui. (JaSK)
2935b21 qt: Hide unspendable outputs in coin control (Wladimir J. van der Laan)
c898846 Add support for watch-only addresses (Pieter Wuille)
73ac7ab Move ui_interface to bitcoin_server.a (Wladimir J. van der Laan)
5090303 qt: Pick translation messages only from necessary files (Wladimir J. van der Laan)
Get rid of SendMoney and replace it by the functionality of
SendMoneyToDestination. This cleans up the code, since only
SendMoneyToDestination was actually used (SendMoney internally from this
routine).
75f51f2a introduced asynchronous processing for blocks, where reject messages
and DoS scoring could be applied outside of ProcessBlock, because block
validation may happen later.
However, some types of errors are still detected immediately (in particular,
CheckBlock violations), which need acting after ProcessBlock returns.
The wallet now uses the mempool fee estimator with a new
command-line option: -txconfirmtarget (default: 1) instead
of using hard-coded fees or priorities.
A new bitcoind that hasn't seen enough transactions to estimate
will fall back to the old hard-coded minimum priority or
transaction fee.
-paytxfee option overrides -txconfirmtarget.
Relaying and mining code isn't changed.
For Qt, the coin control dialog now uses priority estimates to
label transaction priority (instead of hard-coded constants);
unspent outputs were consistently labeled with a much higher
priority than is justified by the free transactions actually
being accepted into blocks.
I did not implement any GUI for setting -txconfirmtarget; I would
suggest getting rid of the "Pay transaction fee" GUI and replace
it with either "target number of confirmations" or maybe
a "faster confirmation <--> lower fee" slider or select box.
This changes the keystore data format, wallet format and IsMine logic
to detect watch-only outputs based on direct script matching rather
than first trying to convert outputs to destinations (addresses).
The reason is that we don't know how the software that has the spending
keys works. It may support the same types of scripts as us, but that is
not guaranteed. Furthermore, it removes the ambiguity between addresses
used as identifiers for output scripts or identifiers for public keys.
One practical implication is that adding a normal pay-to-pubkey-hash
address via importaddress will not cause payments to the corresponding
full public key to be detected as IsMine. If that is wanted, add those
scripts directly (importaddress now also accepts any hex-encoded script).
Conflicts:
src/wallet.cpp
Changes:
* Add Add/Have WatchOnly methods to CKeyStore, and implementations
in CBasicKeyStore.
* Add similar methods to CWallet, and support entries for it in
CWalletDB.
* Make IsMine in script/wallet return a new enum 'isminetype',
rather than a boolean. This allows distinguishing between
spendable and unspendable coins.
* Add a field fSpendable to COutput (GetAvailableCoins' return type).
* Mark watchonly coins in listunspent as 'watchonly': true.
* Add 'watchonly' to validateaddress, suppressing script/pubkey/...
in this case.
Based on a patch by Eric Lombrozo.
Conflicts:
src/qt/walletmodel.cpp
src/rpcserver.cpp
src/wallet.cpp
This is PR #4271, but with the changes to the descriptors, both the names of the
files and the names of the intermediate build artifact archives, removed.
This also closes#3775 if it goes in, because it covers the changes in
that PR.
Note: This is added to our existing automake targets rather than as a
libtool-style lib. The switch to libtool-style targets can come later if it
proves to not add any complications.
5d59921 add missing BOOST_FOREACH indentation in ThreadSocketHandler() (Philip Kaufmann)
9e9ca2b small cleanup of #ifdefs in BindListenPort() (Philip Kaufmann)
After pull #4288, RPC messages indicating errors have a Content-Length unrelated
to their actual contents, rendering bitcoin-cli and curl unable to decode the
reply.
This patch sets the Content-Length field based on the actual content returned.
Additionally, pull #4288 clobbered the error descriptions provided in
ErrorReply, which bitcoin-cli relies upon; this patch moves #4288 http-error
descriptions to an HTTPError method, allowing HTTPReply to pass content on
unchanged.
The original comment forgets to account for the script push which will
need an OP_PUSHDATA2 + 2-bytes for the 513 script bytes.
props davecgh
fixes#4224
-respendnotify=<cmd> Execute command when a network tx respends wallet
tx input (%s=respend TxID, %t=wallet TxID)
Add respendsobserved array to gettransaction, listtransactions, and
listsinceblock RPCs. This omits the malleated clones that are included
in the walletconflicts array.
Add RPC help for respendsobserved and walletconflicts (help was missing
for the latter).
Respend transactions that conflict with transactions already in the
wallet are added to it. They are not displayed unless they also involve
the wallet, or get into a block. If they do not involve the wallet,
they continue not to affect balance.
Transactions that involve the wallet, and have conflicting non-equivalent
transactions, are highlighted in red. When the conflict first occurs, a
modal dialog is thrown.
CWallet::SyncMetaData is changed to sync only to equivalent transactions.
When a conflict is added to the wallet, counter nConflictsReceived is
incremented. This acts like a change in active block height for the
purpose of triggering UI updates.
Allows network wallets and other clients to see transactions that respend
a prevout already spent in an unconfirmed transaction in this node's mempool.
Knowledge of an attempted double-spend is of interest to recipients of the
first spend. In some cases, it will allow these recipients to withhold
goods or services upon being alerted of a double-spend that deprives them
of payment.
As before, respends are not added to the mempool.
Anti-Denial-of-Service-Attack provisions:
- Use a bloom filter to relay only one respend per mempool prevout
- Rate-limit respend relays to a default of 100 thousand bytes/minute
- Define tx2.IsEquivalentTo(tx1): equality when scriptSigs are not considered
- Do not relay these equivalent transactions
Remove an unused variable declaration in txmempool.cpp.
ed5769f Move AcceptedConnection class to rpcserver.h. (Jeff Garzik)
854d013 RPC code movement: separate out JSON-RPC execution logic from HTTP server logic (Jeff Garzik)
c912e22 RPC cleanup: Improve HTTP server replies (Jeff Garzik)
1) support varying content types
2) support only sending the header
3) properly deliver error message as content, if HTTP error
4) move AcceptedConnection class to header, for wider use
By default, all command line parameters are converted into JSON string
values. There is no need to manually specify the incoming type.
A binary decision "parse as string or JSON?" is all that's necessary.
Convert to a simple class, initialized at runtime startup, which offers
a quick lookup to answer "parse as JSON?" conversion question.
Future parameter conversions need only to indicate the method name
and zero-based index of the parameter needing JSON parsing.
In the LookupIntern(), things changed are:
1. Call getaddrinfo_a() instead of getaddrinfo() if available, the former is a sync version of the latter;
2. Try using inet_pton()/inet_addr() to convert the input text to a network addr structure at first, if success the extra name resolving thread inside getaddrinfo_a() could be avoided;
3. An interruption point added in the waiting loop for return from getaddrinfo_a(), which completes the improve for thread responsiveness.
A easy way to see the effect is to kick off a 'bitcoind stop' immediately after 'bitcoind -daemon', before the change it would take several, or even tens of, minutes on a bad network situation to wait for the running bitcoind to exit, now it costs only seconds.
Signed-off-by: Huang Le <4tarhl@gmail.com>
8ae973c Allocate more space if necessary in RandSeedAddPerfMon (Wladimir J. van der Laan)
be873f6 Issue warning if collecting RandSeed data failed (Wladimir J. van der Laan)
fcb0a1b change "char pch[200000]" to "new char[200000]" (daniel)
Currently we use a fixed buffer of 250000 bytes to request
HKEY_PERFORMANCE_DATA. In many cases this is not enough, causing the
entropy collection to be skipped.
Use a loop that grows the buffer as specified in the RegQueryValueEx
documentation:
http://msdn.microsoft.com/en-us/library/windows/desktop/ms724911%28v=vs.85%29.aspx
(as the size of the performance data can differ for every call, the
normal solution of requesting the size then allocating that can't work)
- SO_NOSIGPIPE isn't available on WIN32 so merge the 2 non-WIN32 blocks
- use predefined names from header for IPV6_PROTECTION_LEVEL and
PROTECTION_LEVEL_UNRESTRICTED
Two changes:
First removes a unit test that fails in my development environment
(OSX, compiled -g3 with clang).
sipa says that's not terribly surprising; the CMutableTransaction change
makes signing a little more expensive but verification quicker. The unit
test timed sign+verify-uncached versus verify-cached-five-times.
He also says the test will be invalid when libsec256kp1 is integrated
(because validation is super-optimized over signing).
core.h change fixes a compiler warning (clang -Wall : CMutableTransaction defined
as struct, declared as class in script.h).
- New status bar control shows the current Unit of Display.
When clicked (left,or right button) it shows a context menu
that allows the user to switch the current Unit of Display (BTC, mBTC, uBTC)
- Recent Requests and Transaction Table headers are now updated when
unit of display is changed, because their "Amount" column now displays the
current unit of display.
- Takes care of issue #3970 Units in transaction export csv file.
- Small refactors for reusability.
- Demo Video https://www.youtube.com/watch?v=wwcr0Yh68go&list=UUG3jF2hgofmLWP0tRPisQAQ
- changes after Diapolo's feedback. Have not been able to build after last pool, issues with boost on MacOSX, will test on Ubuntu these changes.
- removed return statement on switch
- renamed onDisplayUnitsChanged(int) to updateDisplayUnit(int)
- now getAmountColumnTitle(int unit) takes a simple unit parameter. moved to BitcoinUnits.
75c82d4 Move coins.cpp and keystore.cpp to libbitcoin_common (Wladimir J. van der Laan)
84ce18c Remove unnecessary dependencies for bitcoin-cli (Wladimir J. van der Laan)
14f888c Move network-time related functions to timedata.cpp/h (Wladimir J. van der Laan)
This commit removes all the unnecessary dependencies (key, core,
netbase, sync, ...) from bitcoin-cli.
To do this it shards the chain parameters into BaseParams, which
contains just the RPC port and data directory (as used by utils and
bitcoin-cli) and Params, with the rest.
Relax the AreInputsStandard() tests for P2SH transactions --
allow any Script in a P2SH transaction to be relayed/mined,
as long as it has 15 or fewer signature operations.
Rationale: https://gist.github.com/gavinandresen/88be40c141bc67acb247
I don't have an easy way to test this, but the code changes are
straightforward and I've updated the AreInputsStandard unit tests.
bitcoin-config.h moved, but the old file is likely to still exist when
reconfiguring or switching branches. This would've caused files to not rebuild
correctly, and other strange problems.
Make the path explicit so that the old one cannot be found.
Core libs use config/bitcoin-config.h.
Libs (like crypto) which don't want access to bitcoin's headers continue
to use -Iconfig and #include bitcoin-config.h.
This avoids a race condition in which the connection was
made but the version handshake is not completed yet. In that
case transactions won't be broadcasted to a peer yet, and
the nodes will wait forever for their mempools to sync.
`&vch[vch.size()]` and even `&vch[0]` on vectors can cause assertion
errors with VC in debug mode. This is the problem mentioned in #4239.
The deeper problem with this is that we rely on undefined behavior.
- Add `begin_ptr` and `end_ptr` functions that get the beginning and end
pointer of vector in a reliable way that copes with empty vectors and
doesn't reference outside the vector
(see https://stackoverflow.com/questions/1339470/how-to-get-the-address-of-the-stdvector-buffer-start-most-elegantly/1339767#1339767).
- Add a convenience constructor to CFlatData that wraps a vector.
I added `begin_ptr` and `end_ptr` as separate functions as I imagine
they will be useful in more places.
a0495bb Add <Hasher>::OUTPUT_SIZE (Pieter Wuille)
4791b99 crypto: create a separate lib for crypto functions (Cory Fields)
f2647cc crypto: explicitly check for byte read/write functions (Cory Fields)
5437248 build: move bitcoin-config.h to its own directory (Cory Fields)
3820e01 Extend and move all crypto tests to crypto_tests.cpp (Pieter Wuille)
7ecd973 Move {Read,Write}{LE,BE}{32,64} to common.h and use builtins if possible (Pieter Wuille)
a5bc9c0 Add built-in RIPEMD-160 implementation (Pieter Wuille)
13b5dfe Move crypto implementations to src/crypto/ (Pieter Wuille)
1cc344c Add built-in SHA-1 implementation. (Pieter Wuille)
85aab2a Switch miner.cpp to use sha2 instead of OpenSSL. (Pieter Wuille)
cf0c47b Remove getwork() RPC call (Pieter Wuille)
7b4737c Switch script.cpp and hash.cpp to use sha2.cpp instead of OpenSSL. (Pieter Wuille)
977cdad Add a built-in SHA256/SHA512 implementation. (Pieter Wuille)
6afa493 rpc: Add acceptors only when listening succeeded (Wladimir J. van der Laan)
33e5b42 rpc: Ignore and log errors during cancel (Wladimir J. van der Laan)
Cancelling the RPC acceptors can sometimes result in an error about
a bad file descriptor.
As this is the shutdown sequence we need to continue nevertheless,
ignore these errors, log a warning and proceed.
Fixes#4352.
As it says on the tin. It was deprecated in version 0.9, and
at some point it should be removed.
Removes the dependency of bitcoind on libbitcoin-cli.a. Move
some functions that used to be shared but are now only used in
bitcoin-cli.cpp to that file.
After this change, an error is printed (and exit code 1 is returned)
when the user tries to send RPC commands using bitcoind.
5c97aae qt: Unify AboutDialog and HelpMessageDialog (Wladimir J. van der Laan)
45615af Add 'about' information to `-version` output (Wladimir J. van der Laan)
97789d3 util: Add function FormatParagraph to format paragraph to fixed-width (Wladimir J. van der Laan)
96b733e Add `-version` option to get just the version (Wladimir J. van der Laan)
Adds a copyright and attribution message to the `-version` output
(the same as shown in the About dialog in the GUI).
Move the message to a function LicenseInfo in init.cpp.
Adds a `-version` or `--version` option to print just the version
of the program for bitcoind, bitcoin-cli and bitcoin-qt.
Also make it that `-help` can be used to display the help (as well as
existing `--help`). Up to now, `-help` was the only option that didn't
work with either one or two dashes.
- remove an unneded else in ConnectNode()
- make 0 a double and change to 0.0 in ConnectNode()
- rename strDest to pszDest in OpenNetworkConnection()
- remove an unneded call to our REF() macro in BindListenPort()
- small style cleanups and removal of unneeded new-lines
- add DEFAULT_LISTEN in net.h and use in the code (shared
setting between core and GUI)
Important: This makes it obvious, that we need to re-think the
settings/options handling, as GUI settings are processed before
any parameter-interaction (which is mostly important for network
stuff) in AppInit2()!
The rcc tool is quirky and only honors files in the same directory as the qrc.
When doing an out-of-tree build (as 'make distcheck' does), the generated
translation files end up in a different path, so rcc can't find them.
Split them up so that rcc is run twice: once for static source files and once
for generated files.
... instead of after 30 minutes of no sending, for latency measurement
and keep-alive. Also, disconnect if no reply arrives within 20 minutes,
instead of 90 of inactivity (for peers supporting the 'pong' message).
f0a83fc Use Params().NetworkID() instead of TestNet() from the payment protocol (jtimon)
2871889 net.h was using std namespace through chainparams.h included in protocol.h (jtimon)
c8c52de Replace virtual methods with static attributes, chainparams.h depends on protocol.h instead of the other way around (jtimon)
a3d946e Get rid of TestNet() (jtimon)
6fc0fa6 Add RPCisTestNet chain parameter (jtimon)
cfeb823 Add RequireStandard chain parameter (jtimon)
21913a9 Add AllowMinDifficultyBlocks chain parameter (jtimon)
d754f34 Move majority constants to chainparams (jtimon)
8d26721 Get rid of RegTest() (jtimon)
cb9bd83 Add DefaultCheckMemPool chain parameter (jtimon)
2595b9a Add DefaultMinerThreads chain parameter (jtimon)
bfa9a1a Add MineBlocksOnDemand chain parameter (jtimon)
1712adb Add MiningRequiresPeers chain parameter (jtimon)
18e7216 Push cs_mains down in ProcessBlock (Pieter Wuille)
202e019 Move all post-chaintip-change notifications to ActivateBestChain (Pieter Wuille)
4e0eed8 Allow ActivateBestChain to release its lock on cs_main (Pieter Wuille)
77339e5 Get rid of the static chainMostWork (optimization) (Pieter Wuille)
171ca77 estimatefee / estimatepriority RPC methods (Gavin Andresen)
0193fb8 Allow multiple regression tests to run at once (Gavin Andresen)
c6cb21d Type-safe CFeeRate class (Gavin Andresen)
New RPC methods: return an estimate of the fee (or priority) a
transaction needs to be likely to confirm in a given number of
blocks.
Mike Hearn created the first version of this method for estimating fees.
It works as follows:
For transactions that took 1 to N (I picked N=25) blocks to confirm,
keep N buckets with at most 100 entries in each recording the
fees-per-kilobyte paid by those transactions.
(separate buckets are kept for transactions that confirmed because
they are high-priority)
The buckets are filled as blocks are found, and are saved/restored
in a new fee_estiamtes.dat file in the data directory.
A few variations on Mike's initial scheme:
To estimate the fee needed for a transaction to confirm in X buckets,
all of the samples in all of the buckets are used and a median of
all of the data is used to make the estimate. For example, imagine
25 buckets each containing the full 100 entries. Those 2,500 samples
are sorted, and the estimate of the fee needed to confirm in the very
next block is the 50'th-highest-fee-entry in that sorted list; the
estimate of the fee needed to confirm in the next two blocks is the
150'th-highest-fee-entry, etc.
That algorithm has the nice property that estimates of how much fee
you need to pay to get confirmed in block N will always be greater
than or equal to the estimate for block N+1. It would clearly be wrong
to say "pay 11 uBTC and you'll get confirmed in 3 blocks, but pay
12 uBTC and it will take LONGER".
A single block will not contribute more than 10 entries to any one
bucket, so a single miner and a large block cannot overwhelm
the estimates.
Use CFeeRate instead of an int64_t for quantities that are
fee-per-size.
Helps prevent unit-conversion mismatches between the wallet,
relaying, and mining code.
Now that the build is non-recursive, adding to AM_CPPFLAGS means adding to
_all_ cppflags.
Logical groups of includes have been added instead, and are used individually
by various targets.
- Some file generation was still noisy, silence it.
- AM_V_GEN is used rather than @ so that 'make V=1' works as intended
- Cut down on file copies and moves when using sed, use pipes instead
- Avoid the use of top_ and abs_ dirs where possible
Build logic moves from individual Makefile.am's to include files, which
the main src/Makefile.am includes. This avoids having to manage a gigantic
single Makefile.
TODO: Move the rules from the old Makefile.include to where they actually
belong and nuke the old file.
Upgrade for https://www.openssl.org/news/secadv_20140605.txt
Just in case - there is no vulnerability that affects ecdsa signing or
verification.
The MITM attack vulnerability (CVE-2014-0224) may have some effect on
our usage of SSL/TLS.
As long as payment requests are signed (which is the common case), usage
of the payment protocol should also not be affected.
The TLS usage in RPC may be at risk for MITM attacks. If you have
`-rpcssl` enabled, be sure to update OpenSSL as soon as possible.
1411a51 doc: Update hash in release process for new windows deps intermediate (Wladimir J. van der Laan)
386e732 gitian: make linux qt intermediate deterministic (Wladimir J. van der Laan)
Should be merged after pull request #4281
("Add `-version` option to get just the version #4281"),
because is changed "--help" to "-help".
Checked that grep of 'mapArgs.count("--' returned only
three places that are fixed by pull request #4281.
Previously if bitcoind is linked with an OpenSSL which is compiled
without EC support, this is seen as an assertion failure "pKey !=
NULL" at key.cpp:134, which occurs after several seconds. It is an
esoteric piece of knowledge to interpret this as "oops, I linked
with the wrong OpenSSL", and because of the delay it may not even
be noticed.
The new output is
: OpenSSL appears to lack support for elliptic curve cryptography. For
more information, visit
https://en.bitcoin.it/wiki/OpenSSL_and_EC_Libraries
: Initialization sanity check failed. Bitcoin Core is shutting down.
which occurs immediately after attempted startup.
This also blocks in an InitSanityCheck() function which currently only
checks for EC support but should eventually do more. See #4081.
I added a link to my guide about using docker containers + LXC (I am planning to maintain this at work
for future bitcoin versions), then I mentioned other virtualization options (KVM, LXC).
This commit includes a fix issue for documentation issue #4269 that consists in telling users to
checkout correct bitcoin version before using the gitian descriptors (otherwise all hell can break loose).
Also, I replaced URL for Debian 7.4 ISO with a correct one and added link to official Debian ISO sources.
A qt installation date snuck into the host utils (lrelease etc)
This doesn't affect the end product, so no dependency version bump.
It also doesn't explain why gavin's and mine build is different
Made the following links clickable:
http://www.opensource.org/licenses/mit-license.phphttp://www.openssl.org/eay@cryptsoft.com
(Squashed commits into one commit as suggested by @laanwj)
Replaced label with text browser on About Bitcoin Core Screen
So that the links on the About screen can be clickable
Replaced html property with text property
I have now removed unnecessary html so this should make life easier for
translators and you @Diapolo :). What do you think?
The size of the window needs to change
The size of the window needs to change when you make links clickable.
Thanks for pointing that out @laanwj
Using the https://www.openssl.org over the http link
Using the https://www.openssl.org over the http link as suggested by
@Diapolo
Since they are not real opcodes, being reported as OP_UNKNOWN is less confusing for human-readable decoding.
Signed-off-by: Huang Le <4tarhl@gmail.com>
NodeSyncScore() should find the node which we recv data most recently, so put a negative sign to pnode->nLastRecv is indeed wrong.
Also change the return value type to int64_t.
Signed-off-by: Huang Le <4tarhl@gmail.com>
Qt5 Removed the qt_mac_set_dock_menu function and left no replacement. It was
later re-added and deprecated for backwards-compatibility.
Qt5.2 adds the non-deprecated QMenu::setAsDockMenu(). Use that when possible.
f40dbee remove CPubKey::VerifyCompact( ) which is never used (Kamil Domanski)
28b6c1d remove GetMedianTime( ) which is never used (Kamil Domanski)
5bd4adc remove LookupHostNumeric( ) which is never used (Kamil Domanski)
595f691 remove LogException( ) which is never used (Kamil Domanski)
f4057cb remove CTransaction::IsNewerThan which is never used (Kamil Domanski)
0e31e56 remove CWallet::AddReserveKey which is never used (Kamil Domanski)
Log the name of the error as well as the error code if a network problem
happens. This makes network troubleshooting more convenient.
Use thread-safe strerror_r and the WIN32 equivalent FormatMessage.
8c93bf4 LoadBlockIndexDB(): Require block db reindex if any blk*.dat files are missing. (Ashley Holman)
7a0e84d ProcessGetData(): abort if a block file is missing from disk (Ashley Holman)
d56e30c removed a few unnecessary casts (Kamil Domanski)
3e74ac2 json_spirit: #include <stdint.h> (Kamil Domanski)
4b61a6a switch from boost int types to <stdint.h> (Kamil Domanski)
b5ad5e7 Add Python test for -rpcbind and -rpcallowip (Wladimir J. van der Laan)
f923c07 Support IPv6 lookup in bitcoin-cli even when IPv6 only bound on localhost (Wladimir J. van der Laan)
deb3572 Add -rpcbind option to allow binding RPC port on a specific interface (Wladimir J. van der Laan)
First query in the current way (intelligently determining which network
has a non-localhost interface). If this does not succeed, try plain
lookup.
Needed for testing.
Fixes#1827 by always allowing IPv6 to be used.
Add -rpcbind command option to specify binding RPC service on one
or multiple specific interfaces.
Functionality if -rpcbind is not specified remains the same as before:
- If no -rpcallowip specified, bind on localhost
- If no -rpcbind specified, bind on any interface
Implements part of #3111.
Pull updated translations from Transifex.
Add mn (Mongolian) language.
Do not update English translation for now as we want to keep
compatibility with 0.9.
cef4494 rpc: keep track of acceptors, and cancel them in StopRPCThreads (Wladimir J. van der Laan)
381b25d doc: remove mention of `-rpctimeout` from man page (Wladimir J. van der Laan)
1a44522 rpc: Make sure conn object is always cleaned up (Wladimir J. van der Laan)
0a0cd34 rpc: pass errors from async_accept (Wladimir J. van der Laan)
Fixes#4156.
The problem is that the boost::asio::io_service destructor
waits for the acceptors to finish (on windows, and boost 1.55).
Fix this by keeping track of the acceptors and cancelling them before
stopping the event loops.
Make sure conn object always gets cleaned up by using a
`boost::shared_ptr`.
This makes valgrind happy - before this commit, one connection object
always leaked at shutdown, as well as can avoid other leaks, when
for example an exception happens.
Also add an explicit Close() to the !ClientAllowed path to make it similar
to the normal path (I'm not sure whether it is needed, but it
can't hurt).
According to the [boost::asio documentation](http://www.boost.org/doc/libs/1_55_0/doc/html/boost_asio/reference/basic_socket_acceptor/async_accept/overload2.html),
the function signature of the handler must be:
void handler(
const boost::system::error_code& error // Result of operation.
);
We were binding *all* the arguments, instead of all but the error,
resulting in nullary function that never got the error. Fix this
by adding an input argument substitution.
21bf3d2 Add tests for BoostAsioToCNetAddr (Wladimir J. van der Laan)
fdbd707 Remove unused function WildcardMatch (Wladimir J. van der Laan)
ee21912 rpc: Use netmasks instead of wildcards for IP address matching (Wladimir J. van der Laan)
e16be73 net: Add CSubNet class for subnet matching (Wladimir J. van der Laan)
d864275 Use new function parseint32 in SplitHostPort (Wladimir J. van der Laan)
0d4ea1c util: add parseint32 function with strict error reporting (Wladimir J. van der Laan)
397668e Deduplicate uint* comparison operator logic (Pieter Wuille)
df9eb5e Move {Get,Set}Compact from bignum to uint256 (Pieter Wuille)
a703150 Add multiplication and division to uint160/uint256 (Pieter Wuille)
4d480c8 Exception instead of assigning 0 in case of wrong vector length (Pieter Wuille)
eb2cbd7 Deduplicate shared code between uint160 and uint256 (Pieter Wuille)
`-rpcallowip` currently has a wacky wildcard-based format. After this
commit it will accept the more standard format, for example:
- Ranges with netmask 127.0.0.0/255.255.255.0, ::/0
- Ranges with cidr 12.3.4.5/24, 12:34:56:78:9a:bc:de:00/112
- Loose IPs ::1, 127.0.0.1
Trying to use the old *?-based format will result in an error message at
launch.
None of the current integer parsing functions in util
check whether the result is valid and fits in the range
of the type. This is required for less sloppy error reporting.
787ee0c Check redeemScript size does not exceed 520 byte limit (Peter Todd)
4d79098 Increase IsStandard() scriptSig length (Peter Todd)
f80cffa Do not trigger a DoS ban if SCRIPT_VERIFY_NULLDUMMY fails (Peter Todd)
6380180 Add rejection of non-null CHECKMULTISIG dummy values (Peter Todd)
29c1749 Let tx (in)valid tests use any SCRIPT_VERIFY flag (Peter Todd)
68f7d1d Create (MANDATORY|STANDARD)_SCRIPT_VERIFY_FLAGS constants (Peter Todd)
redeemScripts >520bytes can't be spent due to the
MAX_SCRIPT_ELEMENT_SIZE limit; previously the addmultisigaddress and
createmultisig RPC calls would let you violate that limit unknowingly.
Also made the wallet code itself check the redeemScript prior to adding
it to the wallet, which in the (rare) instance that a user has added an
invalid oversized redeemScript to their wallet causes an error on
startup. The affected key isn't added to the wallet; other keys are
unaffected.
Removes the limits on number of pubkeys for P2SH CHECKMULTISIG outputs.
Previously with the 500 byte scriptSig limit there were odd restrictions
where even a 1-of-12 P2SH could be spent in a standard transaction(1),
yet multisig scriptPubKey's requiring more signatures quickly ran out of
scriptSig space.
From a "stuff-data-in-the-blockchain" point of view not much has changed
as with the prior commit now only allowing the dummy value to be null
the newly allowed scriptSig space can only be used for signatures. In
any case, just using more outputs is trivial and doesn't cost much.
1) See 779b519480d8c5346de6e635119c7ee772e97ec872240c45e558f582a37b4b73
Mined by BTC Guild.
This is a source of transaction mutability as the dummy value was
previously not checked and could be modified to something other than the
usual OP_0 value.
- replaces checks in SendCoinsDialog::handlePaymentRequest() that belong
to PaymentServer (normal URIs are special cased, as only an isValid
check is done on BTC addresses)
- prevents the client to handle payment requests that do not match the
clients network and shows an error instead (mainly a problem with
drag&drop payment requests onto the client window)
- includes some small comment changes also
Size specifiers are no longer needed now that we use typesafe tinyformat
for string formatting, instead of the system's sprintf.
No functional changes.
This continues the work in #3735.
Generally useless information. Only updates on connect time, not after
that. Peers can easily lie and the median filter is not effective in
preventing that.
In the past it was used for progress display in the GUI but
`CheckPoints::guessVerificationProgress` provides a better way that is now used.
It was too easy to mislead it. Peers do lie about it in practice, see issue #4065.
From the RPC, `getpeerinfo` gives the peer raw values, which are more
useful.
Because this class replaces some usages of CBigNum, tests have been added to
verify that they function the same way. The only difference in their usage is
the handling of out-of-range numbers.
While operands are constrained to [-0x7FFFFFFF,0x7FFFFFFF], the results may
overflow. The overflowing result is technically unbounded, but in practice
it can be no bigger than the result of an operation on two operands. This
implementation limits them to the size of an int64.
CBigNum was unaware of this constraint, so it allowed for unbounded results,
which were then checked before use. CScriptNum asserts if an arithmetic
operation will overflow an int64_t, since scripts are not able to reach those
numbers anyway. Additionally, CScriptNum will throw an exception when
constructed from a vector containing more than 4 bytes This mimics the previous
CastToBigNum behavior.
deleted the empty no throw test in rpc_wallet_tests line 65
fixed some comments
starting verify tests
finished verify message tests
changed some comments
a81cd968 introduced a malleability breaker for signatures
(using an even value for S). In e0e14e43 this was changed to
the lower of two potential values, rather than the even one.
Only the signing code was changed though, the (for now unused)
verification code wasn't adapted.
2014-03-10 20:38:32 +01:00
1317 changed files with 178685 additions and 214381 deletions
- export PATH=$(echo $PATH | tr ':' "\n" | sed '/\/opt\/python/d' | tr "\n" ":" | sed "s|::|:|g")
install:
- if [ -n "$PPA" ]; then travis_retry sudo add-apt-repository "$PPA" -y; fi
- if [ -n "$DPKG_ADD_ARCH" ]; then sudo dpkg --add-architecture "$DPKG_ADD_ARCH" ; fi
- if [ -n "$PACKAGES" ]; then travis_retry sudo apt-get update; fi
- if [ -n "$PACKAGES" ]; then travis_retry sudo apt-get install --no-install-recommends --no-upgrade -qq $PACKAGES; fi
before_script:
- unset CC; unset CXX
- if [ "$CHECK_DOC" = 1 ]; then contrib/devtools/check-doc.py; fi
- mkdir -p depends/SDKs depends/sdk-sources
- if [ -n "$OSX_SDK" -a ! -f depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz ]; then curl --location --fail $SDK_URL/MacOSX${OSX_SDK}.sdk.tar.gz -o depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz; fi
- if [ -n "$OSX_SDK" -a -f depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz ]; then tar -C depends/SDKs -xf depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz; fi
The Bitcoin Core project operates an open contributor model where anyone is welcome to contribute towards development in the form of peer review, testing and patches. This document explains the practical process and guidelines for contributing.
Firstly in terms of structure, there is no particular concept of “Core developers” in the sense of privileged people. Open source often naturally revolves around meritocracy where longer term contributors gain more trust from the developer community. However, some hierarchy is necessary for practical purposes. As such there are repository “maintainers” who are responsible for merging pull requests as well as a “lead maintainer” who is responsible for the release cycle, overall merging, moderation and appointment of maintainers.
Contributor Workflow
--------------------
The codebase is maintained using the “contributor workflow” where everyone without exception contributes patch proposals using “pull requests”. This facilitates social contribution, easy testing and peer review.
To contribute a patch, the workflow is as follows:
- Fork repository
- Create topic branch
- Commit patches
The project coding conventions in the [developer notes](doc/developer-notes.md) must be adhered to.
In general [commits should be atomic](https://en.wikipedia.org/wiki/Atomic_commit#Atomic_commit_convention) and diffs should be easy to read. For this reason do not mix any formatting fixes or code moves with actual code changes.
Commit messages should be verbose by default consisting of a short subject line (50 chars max), a blank line and detailed explanatory text as separate paragraph(s); unless the title alone is self-explanatory (like "Corrected typo in main.cpp") then a single title line is sufficient. Commit messages should be helpful to people reading your code in the future, so explain the reasoning for your decisions. Further explanation [here](http://chris.beams.io/posts/git-commit/).
If a particular commit references another issue, please add the reference, for example `refs #1234`, or `fixes #4321`. Using the `fixes` or `closes` keywords will cause the corresponding issue to be closed when the pull request is merged.
Please refer to the [Git manual](https://git-scm.com/doc) for more information about Git.
- Push changes to your fork
- Create pull request
The title of the pull request should be prefixed by the component or area that the pull request affects. Examples:
Consensus: Add new opcode for BIP-XXXX OP_CHECKAWESOMESIG
Net: Automatically create hidden service, listen on Tor
Qt: Add feed bump button
Trivial: Fix typo in main.cpp
If a pull request is specifically not to be considered for merging (yet) please prefix the title with [WIP] or use [Tasks Lists](https://help.github.com/articles/basic-writing-and-formatting-syntax/#task-lists) in the body of the pull request to indicate tasks are pending.
The body of the pull request should contain enough description about what the patch does together with any justification/reasoning. You should include references to any discussions (for example other tickets or mailing list discussions).
At this stage one should expect comments and review from other contributors. You can add more commits to your pull request by committing them locally and pushing to your fork until you have satisfied all feedback.
Squashing Commits
---------------------------
If your pull request is accepted for merging, you may be asked by a maintainer to squash and or [rebase](https://git-scm.com/docs/git-rebase) your commits before it will be merged. The basic squashing workflow is shown below.
git checkout your_branch_name
git rebase -i HEAD~n
# n is normally the number of commits in the pull
# set commits from 'pick' to 'squash', save and quit
# on the next screen, edit/refine commit messages
# save and quit
git push -f # (force push to GitHub)
The length of time required for peer review is unpredictable and will vary from pull request to pull request.
Pull Request Philosophy
-----------------------
Patchsets should always be focused. For example, a pull request could add a feature, fix a bug, or refactor code; but not a mixture. Please also avoid super pull requests which attempt to do too much, are overly large, or overly complex as this makes review difficult.
###Features
When adding a new feature, thought must be given to the long term technical debt and maintenance that feature may require after inclusion. Before proposing a new feature that will require maintenance, please consider if you are willing to maintain it (including bug fixing). If features get orphaned with no maintainer in the future, they may be removed by the Repository Maintainer.
###Refactoring
Refactoring is a necessary part of any software project's evolution. The following guidelines cover refactoring pull requests for the project.
There are three categories of refactoring, code only moves, code style fixes, code refactoring. In general refactoring pull requests should not mix these three kinds of activity in order to make refactoring pull requests easy to review and uncontroversial. In all cases, refactoring PRs must not change the behaviour of code within the pull request (bugs must be preserved as is).
Project maintainers aim for a quick turnaround on refactoring pull requests, so where possible keep them short, uncomplex and easy to verify.
"Decision Making" Process
-------------------------
The following applies to code changes to the Bitcoin Core project (and related projects such as libsecp256k1), and is not to be confused with overall Bitcoin Network Protocol consensus changes.
Whether a pull request is merged into Bitcoin Core rests with the project merge maintainers and ultimately the project lead.
Maintainers will take into consideration if a patch is in line with the general principles of the project; meets the minimum standards for inclusion; and will judge the general consensus of contributors.
In general, all pull requests must:
- have a clear use case, fix a demonstrable bug or serve the greater good of the project (for example refactoring for modularisation);
- be well peer reviewed;
- have unit tests and functional tests where appropriate;
- follow code style guidelines;
- not break the existing test suite;
- where bugs are fixed, where possible, there should be unit tests demonstrating the bug and also proving the fix. This helps prevent regression.
Patches that change Bitcoin consensus rules are considerably more involved than normal because they affect the entire ecosystem and so must be preceded by extensive mailing list discussions and have a numbered BIP. While each case will be different, one should be prepared to expend more time and effort than for other kinds of patches because of increased peer review and consensus building requirements.
###Peer Review
Anyone may participate in peer review which is expressed by comments in the pull request. Typically reviewers will review the code for obvious errors, as well as test out the patch set and opine on the technical merits of the patch. Project maintainers take into account the peer review when determining if there is consensus to merge a pull request (remember that discussions may have been spread out over github, mailing list and IRC discussions). The following language is used within pull-request comments:
- ACK means "I have tested the code and I agree it should be merged";
- NACK means "I disagree this should be merged", and must be accompanied by sound technical justification. NACKs without accompanying reasoning may be disregarded;
- utACK means "I have not tested the code, but I have reviewed it and it looks OK, I agree it can be merged";
- Concept ACK means "I agree in the general principle of this pull request";
- Nit refers to trivial, often non-blocking issues.
Reviewers should include the commit hash which they reviewed in their comments.
Project maintainers reserve the right to weigh the opinions of peer reviewers using common sense judgement and also may weight based on meritocracy: Those that have demonstrated a deeper commitment and understanding towards the project (over time) or have clear domain expertise may naturally have more weight, as one would expect in all walks of life.
Where a patch set affects consensus critical code, the bar will be set much higher in terms of discussion and peer review requirements, keeping in mind that mistakes could be very costly to the wider community. This includes refactoring of consensus critical code.
Where a patch set proposes to change the Bitcoin consensus, it must have been discussed extensively on the mailing list and IRC, be accompanied by a widely discussed BIP and have a generally widely perceived technical consensus of being a worthwhile change based on the judgement of the maintainers.
Release Policy
--------------
The project leader is the release manager for each Bitcoin Core release.
$(LCOV) -a baseline_filtered.info -a leveldb_baseline_filtered.info -a test_bitcoin_filtered.info -a block_test_filtered.info -o $@|$(GREP)"\%"|$(AWK)'{ print substr($$3,2,50) "/" $$5 }' > coverage_percent.txt
$(LCOV) -a baseline_filtered.info -a leveldb_baseline_filtered.info -a test_bitcoin_filtered.info -a block_test_filtered.info -a rpc_test_filtered.info -o $@|$(GREP)"\%"|$(AWK)'{ print substr($$3,2,50) "/" $$5 }' > coverage_percent.txt
AC_DEFINE(HAVE_BOOST_PROGRAM_OPTIONS,,[define if the Boost::PROGRAM_OPTIONS library is available])
BOOSTLIBDIR=`echo $BOOST_LDFLAGS | sed -e 's/@<:@^\/@:>@*//'`
if test "x$ax_boost_user_program_options_lib" = "x"; then
ax_lib=
for libextension in `ls $BOOSTLIBDIR/libboost_program_options*.so* 2>/dev/null | sed 's,.*/,,' | sed -e 's;^lib\(boost_program_options.*\)\.so.*$;\1;'` `ls $BOOSTLIBDIR/libboost_program_options*.dylib* 2>/dev/null | sed 's,.*/,,' | sed -e 's;^lib\(boost_program_options.*\)\.dylib.*$;\1;'` `ls $BOOSTLIBDIR/libboost_program_options*.a* 2>/dev/null | sed 's,.*/,,' | sed -e 's;^lib\(boost_program_options.*\)\.a.*$;\1;'` ; do
AC_MSG_ERROR([libdb_cxx headers missing, ]AC_PACKAGE_NAME[ requires this library for wallet functionality (--disable-wallet to disable wallet functionality)])
AC_ARG_WITH([incompatible-bdb],[AS_HELP_STRING([--with-incompatible-bdb], [allow using a bdb version other than 4.8])],[
AC_MSG_WARN([Found Berkeley DB other than 4.8; wallets opened by this build will not be portable!])
],[
AC_MSG_ERROR([Found Berkeley DB other than 4.8, required for portable wallets (--with-incompatible-bdb to ignore)])
AC_MSG_ERROR([Found Berkeley DB other than 4.8, required for portable wallets (--with-incompatible-bdb to ignore or --disable-wallet to disable wallet functionality)])
AC_ARG_WITH([qt-incdir],[AS_HELP_STRING([--with-qt-incdir=INC_DIR],[specify qt include path (overridden by pkgconfig)])], [qt_include_path=$withval], [])
AC_ARG_WITH([qt-libdir],[AS_HELP_STRING([--with-qt-libdir=LIB_DIR],[specify qt lib path (overridden by pkgconfig)])], [qt_lib_path=$withval], [])
AC_ARG_WITH([qt-plugindir],[AS_HELP_STRING([--with-qt-plugindir=PLUGIN_DIR],[specify qt plugin path (overridden by pkgconfig)])], [qt_plugin_path=$withval], [])
AC_ARG_WITH([qt-translationdir],[AS_HELP_STRING([--with-qt-translationdir=PLUGIN_DIR],[specify qt translation path (overridden by pkgconfig)])], [qt_translation_path=$withval], [])
AC_ARG_WITH([qt-bindir],[AS_HELP_STRING([--with-qt-bindir=BIN_DIR],[specify qt bin path])], [qt_bin_path=$withval], [])
AC_ARG_WITH([qtdbus],
@@ -69,6 +71,8 @@ AC_DEFUN([BITCOIN_QT_INIT],[
[enable DBus support (default is yes if qt is enabled and QtDBus is found)])],
[use_dbus=$withval],
[use_dbus=auto])
AC_SUBST(QT_TRANSLATION_DIR,$qt_translation_path)
])
dnl Find the appropriate version of Qt libraries and includes.
AC_CHECK_LIB([imm32], [main],, BITCOIN_QT_FAIL(libimm32 not found))
fi
])
BITCOIN_QT_CHECK(AC_CHECK_LIB([z] ,[main],,BITCOIN_QT_FAIL(zlib not found)))
BITCOIN_QT_CHECK(AC_CHECK_LIB([png] ,[main],,BITCOIN_QT_FAIL(png not found)))
BITCOIN_QT_CHECK(AC_CHECK_LIB([z] ,[main],,AC_MSG_WARN([zlib not found. Assuming qt has it built-in])))
BITCOIN_QT_CHECK(AC_CHECK_LIB([png] ,[main],,AC_MSG_WARN([libpng not found. Assuming qt has it built-in])))
BITCOIN_QT_CHECK(AC_CHECK_LIB([jpeg] ,[main],,AC_MSG_WARN([libjpeg not found. Assuming qt has it built-in])))
BITCOIN_QT_CHECK(AC_SEARCH_LIBS([pcre16_exec], [qtpcre pcre16],,AC_MSG_WARN([libpcre16 not found. Assuming qt has it built-in])))
BITCOIN_QT_CHECK(AC_SEARCH_LIBS([hb_ot_tags_from_script] ,[qtharfbuzzng harfbuzz],,AC_MSG_WARN([libharfbuzz not found. Assuming qt has it built-in or support is disabled])))
BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}Core] ,[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXCore not found)))
BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}Gui] ,[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXGui not found)))
BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}Network],[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXNetwork not found)))
if test x$bitcoin_qt_got_major_vers == x5; then
if test x$bitcoin_qt_got_major_vers = x5; then
BITCOIN_QT_CHECK(AC_CHECK_LIB([${QT_LIB_PREFIX}Widgets],[main],,BITCOIN_QT_FAIL(lib$QT_LIB_PREFIXWidgets not found)))
fi
QT_LIBS="$LIBS"
LIBS="$TEMP_LIBS"
dnl This is ugly and complicated. Yuck. Works as follows:
dnl We can't discern whether Qt4 builds are static or not. For Qt5, we can
dnl check a header to find out. When Qt is built statically, some plugins must
dnl be linked into the final binary as well. These plugins have changed between
dnl Qt4 and Qt5. With Qt5, languages moved into core and the WindowsIntegration
dnl plugin was added. Since we can't tell if Qt4 is static or not, it is
dnl assumed for all non-pkg-config builds.
dnl _BITCOIN_QT_CHECK_STATIC_PLUGINS does a quick link-check and appends the
dnl results to QT_LIBS.
BITCOIN_QT_CHECK([
if test x$bitcoin_qt_got_major_vers == x5; then
_BITCOIN_QT_IS_STATIC
if test x$bitcoin_cv_static_qt == xyes; then
AC_DEFINE(QT_STATICPLUGIN, 1, [Define this symbol if qt plugins are static])
Allows for sending of all standard Bitcoin commands via RPC rather than as command line args.
### [SpendFrom](/contrib/spendfrom) ###
Use the raw transactions API to send coins received on a particular
@@ -14,18 +11,17 @@ Repository Tools
### [Developer tools](/contrib/devtools) ###
Specific tools for developers working on this repository.
Contains the script `github-merge.sh` for merging github pull requests securely and signing them using GPG.
Contains the script `github-merge.py` for merging github pull requests securely and signing them using GPG.
### [Verify-Commits](/contrib/verify-commits) ###
Tool to verify that every merge commit was signed by a developer using the above `github-merge.py` script.
### [Linearize](/contrib/linearize) ###
Construct a linear, no-fork, best version of the blockchain.
### [PyMiner](/contrib/pyminer) ###
This is a 'getwork' CPU mining client for Bitcoin. It is pure-python, and therefore very, very slow. The purpose is to provide a reference implementation of a miner, for study.
### [Qos](/contrib/qos) ###
A Linux bash script that will set up tc to limit the outgoing bandwidth for connections to the Bitcoin network. This means one can have an always-on bitcoind instance running, and another local bitcoind/bitcoin-qt instance which connects to this node and receives blocks from it.
A Linux bash script that will set up traffic control (tc) to limit the outgoing bandwidth for connections to the Bitcoin network. This means one can have an always-on bitcoind instance running, and another local bitcoind/bitcoin-qt instance which connects to this node and receives blocks from it.
### [Seeds](/contrib/seeds) ###
Utility to generate the pnSeed[] array that is compiled into the client.
@@ -38,23 +34,22 @@ Contains files used to package bitcoind/bitcoin-qt
for Debian-based Linux systems. If you compile bitcoind/bitcoin-qt yourself, there are some useful files here.
bitcoin-cli \- a remote procedure call client for Bitcoin Core.
.SHSYNOPSIS
bitcoin-cli [options] <command> [params] \- Send command to Bitcoin Core.
.TP
bitcoin-cli [options] help \- Asks Bitcoin Core for a list of supported commands.
.SHDESCRIPTION
This manual page documents the bitcoin-cli program. bitcoin-cli is an RPC client used to send commands to Bitcoin Core.
.SHOPTIONS
.TP
\fB\-?\fR
Show possible options.
.SH"SEE ALSO"
\fBbitcoind\fP, \fBbitcoin.conf\fP
.SHAUTHOR
This manual page was written by Ciemon Dunville <ciemon@gmail.com>. Permission is granted to copy, distribute and/or modify this document under the terms of the MIT License.
The complete text of the MIT License can be found on the web at \fIhttp://opensource.org/licenses/MIT\fP.
All command-line options (except for '\-datadir' and '\-conf') may be specified in a configuration file, and all configuration file options may also be specified on the command line. Command-line options override values set in the configuration file.
All command-line options (except for '\-conf') may be specified in a configuration file, and all configuration file options may also be specified on the command line. Command-line options override values set in the configuration file.
.TP
The configuration file is a list of 'setting=value' pairs, one per line, with optional comments starting with the '#' character.
The configuration file is a list of 'setting=value' pairs, one per line, with optional comments starting with the '#' character. Please refer to bitcoind(1) for a up to date list of valid options.
.TP
The configuration file is not automatically created; you can create it using your favorite plain-text editor. By default, bitcoind(1) will look for a file named bitcoin.conf(5) in the bitcoin data directory, but both the data directory and the configuration file path may be changed using the '\-datadir' and '\-conf' command-line arguments.
.SHLOCATION
bitcoin.conf should be located in $HOME/.bitcoin
.SHNETWORK-RELATEDSETTINGS
.TP
.TP
\fBtestnet=\fR[\fI'1'\fR|\fI'0'\fR]
Enable or disable run on the test network instead of the real *bitcoin* network.
.TP
\fBproxy=\fR\fI'127.0.0.1:9050'\fR
Connect via a socks4 proxy.
.TP
\fBaddnode=\fR\fI'10.0.0.2:8333'\fR
Use as many *addnode=* settings as you like to connect to specific peers.
.TP
\fBconnect=\fR\fI'10.0.0.1:8333'\fR
Use as many *connect=* settings as you like to connect ONLY to specific peers.
.TP
\fRmaxconnections=\fR\fI'value'\fR
Maximum number of inbound+outbound connections.
.SHJSON-RPCOPTIONS
.TP
\fBserver=\fR[\fI'1'\fR|\fI'0'\fR]
Tells *bitcoin* to accept or not accept JSON-RPC commands.
.TP
\fBrpcuser=\fR\fI'username'\fR
You must set *rpcuser* to secure the JSON-RPC api.
.TP
\fBrpcpassword=\fR\fI'password'\fR
You must set *rpcpassword* to secure the JSON-RPC api.
.TP
\fBrpctimeout=\fR\fI'30'\fR
How many seconds *bitcoin* will wait for a complete RPC HTTP request, after the HTTP connection is established.
.TP
\fBrpcallowip=\fR\fI'192.168.1.*'\fR
By default, only RPC connections from localhost are allowed. Specify as many *rpcallowip=* settings as you like to allow connections from other hosts (and you may use * as a wildcard character).
.TP
\fBrpcport=\fR\fI'8332'\fR
Listen for RPC connections on this TCP port.
.TP
\fBrpcconnect=\fR\fI'127.0.0.1'\fR
You can use *bitcoin* or *bitcoind(1)* to send commands to *bitcoin*/*bitcoind(1)* running on another host using this option.
.TP
\fBrpcssl=\fR\fI'1'\fR
Use Secure Sockets Layer (also known as TLS or HTTPS) to communicate with *bitcoin* '\-server' or *bitcoind(1)*. Example of OpenSSL settings used when *rpcssl*='1':
Enable or disable use SSE instructions to try to generate bitcoins faster.
.TP
\fBkeypool=\fR\fI'100'\fR
Pre-generate this many public/private key pairs, so wallet backups will be valid for both prior transactions and several dozen future transactions.
.TP
\fBpaytxfee=\fR\fI'0.00'\fR
Pay an optional transaction fee every time you send bitcoins. Transactions with fees are more likely than free transactions to be included in generated blocks, so may be validated sooner.
.TP
\fBallowreceivebyip=\fR\fI'1'\fR
Allow direct connections for the 'pay via IP address' feature.
bitcoin [options] help <command> \- Get help for a command
.SHDESCRIPTION
This manual page documents the bitcoind program. Bitcoin is a peer-to-peer digital currency. Peer-to-peer (P2P) means that there is no central authority to issue new money or keep track of transactions. Instead, these tasks are managed collectively by the nodes of the network. Advantages:
Bitcoins can be sent easily through the Internet, without having to trust middlemen. Transactions are designed to be irreversible. Be safe from instability caused by fractional reserve banking and central banks. The limited inflation of the Bitcoin system’s money supply is distributed evenly (by CPU power) throughout the network, not monopolized by banks.
This manual page documents the bitcoind program. Bitcoin is an experimental new digital currency that enables instant payments to anyone, anywhere in the world. Bitcoin uses peer-to-peer technology to operate with no central authority: managing transactions and issuing money are carried out collectively by the network. Bitcoin Core is the name of open source software which enables the use of this currency.
Safely copies *wallet.dat* to 'destination', which can be a directory or a path with filename.
.TP
\fBgetaccount 'bitcoinaddress'\fR
Returns the account associated with the given address.
.TP
\fBsetaccount 'bitcoinaddress' ['account']\fR
Sets the ['account'] associated with the given address. ['account'] may be omitted to remove an address from ['account'].
.TP
\fBgetaccountaddress 'account'\fR
Returns a new bitcoin address for 'account'.
.TP
\fBgetaddressesbyaccount 'account'\fR
Returns the list of addresses associated with the given 'account'.
.TP
\fBgetbalance 'account'\fR
Returns the server's available balance, or the balance for 'account'.
.TP
\fBgetblockcount\fR
Returns the number of blocks in the longest block chain.
.TP
\fBgetblocknumber\fR
Returns the block number of the latest block in the longest block chain.
.TP
\fBgetconnectioncount\fR
Returns the number of connections to other nodes.
.TP
\fBgetdifficulty\fR
Returns the proof-of-work difficulty as a multiple of the minimum difficulty.
.TP
\fBgetgenerate\fR
Returns boolean true if server is trying to generate bitcoins, false otherwise.
.TP
\fBsetgenerate 'generate' ['genproclimit']\fR
Generation is limited to ['genproclimit'] processors, \-1 is unlimited.
.TP
\fBgethashespersec\fR
Returns a recent hashes per second performance measurement while generating.
.TP
\fBgetinfo\fR
Returns an object containing server information.
.TP
\fBgetnewaddress 'account'\fR
Returns a new bitcoin address for receiving payments. If 'account' is specified (recommended), it is added to the address book so payments received with the address will be credited to 'account'.
Returns the total amount received by 'bitcoinaddress' in transactions with at least ['minconf'] confirmations.
.TP
\fBgettransaction 'txid'\fR
Returns information about a specific transaction, given hexadecimal transaction ID.
.TP
\fBgetwork 'data'\fR
If 'data' is specified, tries to solve the block and returns true if it was successful. If 'data' is not specified, returns formatted hash 'data' to work on:
\fBhelp\fR
List commands.
"midstate" : precomputed hash state after hashing the first half of the data.
['minconf'] is the minimum number of confirmations before payments are included. ['includeempty'] whether to include addresses that haven't received any payments. Returns an array of objects containing:
"account" : the account of the receiving address.
"amount" : total amount received by the address.
"confirmations" : number of confirmations of the most recent transaction included.
['minconf'] is the minimum number of confirmations before payments are included. ['includeempty'] whether to include addresses that haven't received any payments. Returns an array of objects containing:
"address" : receiving address.
"account" : the account of the receiving address.
"amount" : total amount received by the address.
"confirmations" : number of confirmations of the most recent transaction included.
.TP
\fBlisttransactions 'account' ['count=10']\fR
Returns a list of the last ['count'] transactions for 'account' \- for all accounts if 'account' is not specified or is "*". Each entry in the list may contain:
"category" : will be generate, send, receive, or move.
"amount" : amount of transaction.
"fee" : Fee (if any) paid (only for send transactions).
"confirmations" : number of confirmations (only for generate/send/receive).
"txid" : transaction ID (only for generate/send/receive).
"otheraccount" : account funds were moved to or from (only for move).
"message" : message associated with transaction (only for send).
"to" : message-to associated with transaction (only for send).
Sends amount from account's balance to 'bitcoinaddress'. This method will fail if there is less than amount bitcoins with ['minconf'] confirmations in the account's balance (unless account is the empty-string-named default account; it behaves like the *sendtoaddress* method). Returns transaction ID on success.
Sends amount from the server's available balance to 'bitcoinaddress'. amount is a real and is rounded to the nearest 0.01. Returns transaction id on success.
.TP
\fBstop\fR
Stops the bitcoin server.
.TP
\fBvalidateaddress'bitcoinaddress'\fR
Checks that 'bitcoinaddress' looks like a proper bitcoin address. Returns an object containing:
"isvalid" : true or false.
"ismine" : true if the address is in the server's wallet.
"address" : bitcoinaddress.
*note: ismine and address are only returned if the address is valid.
This directory contains tools for developers working on this repository.
github-merge.sh
==================
check-doc.py
============
Check if all command line args are documented. The return value indicates the
number of undocumented args.
clang-format.py
===============
A script to format cpp source code according to [.clang-format](../../src/.clang-format). This should only be applied to new files or files which are currently not actively developed on. Also, git subtrees are not subject to formatting.
clang-format-diff.py
===================
A script to format unified git diffs according to [.clang-format](../../src/.clang-format).
For instance, to format the last commit with 0 lines of context,
the script should be called from the git root folder as follows.
Run this script every time you change one of the png files. Using pngcrush, it will optimize the png files, remove various color profiles, remove ancillary chunks (alla) and text chunks (text).
#pngcrush -brute -ow -rem gAMA -rem cHRM -rem iCCP -rem sRGB -rem alla -rem text
printfileDict['file']+"\n size diff from: "+str(fileDict['osize'])+" to: "+str(fileDict['psize'])+"\n old sha256: "+oldHash+"\n new sha256: "+newHash+"\n"
print"completed. Checksum stable: "+str(noHashChange)+". Total reduction: "+str(totalSaveBytes)+" bytes"
# Note: not checking flags == 'R': here as linkers set the permission differently
# This does not affect security: the permission flags of the GNU_RELRO program header are ignored, the PT_LOAD header determines the effective permissions.
# However, the dynamic linker need to write to this area so these are RW.
# Glibc itself takes care of mprotecting this area R after relocations are finished.
# See also http://permalink.gmane.org/gmane.comp.gnu.binutils/71347
You need the right hardware: you need a 64-bit-capable CPU with hardware virtualization support (Intel VT-x or AMD-V). Not all modern CPUs support hardware virtualization.
@@ -27,21 +26,20 @@ Once you've got the right hardware and software:
# Create base images
cd gitian-builder
bin/make-base-vm --suite precise --arch i386
bin/make-base-vm --suite precise --arch amd64
bin/make-base-vm --suite trusty --arch amd64
cd ..
# Get inputs (see doc/release-process.md for exact inputs needed and where to get them)
...
# For further build instructions see doc/release-notes.md
# For further build instructions see doc/release-process.md
...
---------------------
`gitian-builder` now also supports building using LXC. See
# "For cross-compiling the lib you must specify certain additional properties at bjam command line: target-os, abi, binary-format, architecture and address-model."
have been made available to assist packagers in creating node packages here.
See doc/init.md for more information.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
