Gemini CLI support was added to the backend in v0.1.33 but was missing
from all user-facing documentation and the website. Added Gemini CLI
(and Hermes where missing) to the agents table, quickstart guides,
CLI reference, installation docs, self-hosting guide, and landing page
hero section with logo.
Uses the existing Resend email service to notify invitees.
Email includes inviter name, workspace name, and a link to the app.
Sent fire-and-forget in a goroutine to avoid blocking the API response.
* feat(security): replace instant member-add with invitation acceptance flow
Users invited to a workspace must now explicitly accept the invitation
before becoming a member. This fixes the security vulnerability where
knowing someone's email was enough to auto-register their runtime to
your workspace.
Changes:
- Add workspace_invitation table with pending/accepted/declined/expired states
- Replace CreateMember with CreateInvitation (same endpoint, new behavior)
- Add accept/decline/revoke/list invitation API endpoints
- Add invitation WS events for real-time notification
- Frontend: invitation accept/decline UI in workspace switcher
- Frontend: pending invitations section in members settings tab
* fix(invitation): address PR review nits
- Fix invitation:revoked listener to send event to invitee user (was no-op)
- Remove duplicate queryClient2 in app-sidebar.tsx, reuse existing queryClient
- Add expires_at > now() filter to ListPendingInvitationsByWorkspace query
Remove admin/owner-only restriction from skill creation and import routes.
Add canManageSkill helper that lets skill creators manage their own skills,
matching the existing canManageAgent pattern for agents.
Without a heartbeat, dead or silently-dropped WebSocket connections are
not detected until the next write fails. This causes goroutine and memory
leaks for each stale client, and breaks real-time updates for users whose
connections are dropped by a load balancer or proxy idle timeout (e.g.
Nginx default 60s, AWS ALB default 60s) without a TCP RST.
This commit applies the standard gorilla/websocket keepalive pattern:
- writePump sends a ping frame every pingPeriod (54 s) using a ticker.
The ticker replaces the simple range-over-channel loop with a select,
which also adds a proper write deadline on every write operation.
- readPump installs a pong handler that resets the read deadline on each
pong, keeping healthy connections alive indefinitely. A connection
that misses a pong is detected within pongWait (60 s) and closed,
which causes readPump to exit and send the client to hub.unregister
for clean removal.
Timing constants:
writeWait = 10 s (per-write deadline, prevents hung writers)
pongWait = 60 s (max silence before declaring a connection dead)
pingPeriod = 54 s (ping interval, 90 % of pongWait)
Also adds user_id and workspace_id to the write-error log line so that
connection problems can be attributed to a specific client in production.
All existing hub tests continue to pass unchanged.
Signed-off-by: Asish Kumar <officialasishkumar@gmail.com>
On self-hosted deployments where the frontend is the public entrypoint,
uploaded files return 404 because /uploads/* requests aren't proxied to
the backend. Add a rewrite rule following the existing pattern for /api/*,
/ws, and /auth/*.
Closes#1004
Drops the VITE_REMOTE_API Vite-proxy path introduced in be8b099c.
The remote-backend proxy is no longer needed; direct dev via
VITE_API_URL covers every workflow we still support.
- remove dev:desktop:remote (root) and dev:remote (desktop) scripts
- revert electron.vite.config.ts to a flat config — no loadEnv, no
per-route proxies
- simplify App.tsx: single apiBaseUrl/wsUrl branch, and
DAEMON_TARGET_API_URL derives directly from VITE_API_URL
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When the CLI config has no watched workspaces (e.g. fresh desktop app
install), loadWatchedWorkspaces returns successfully but registers zero
runtimes. The runtime check immediately after fails with "no runtimes
registered" before workspaceSyncLoop gets a chance to discover
workspaces from the API.
Run one sync cycle inline when the watched list is empty so the daemon
can bootstrap itself without a pre-configured workspace list.
Full-screen modals (create-workspace) covered the app titlebar, so the
Back button landed on top of the macOS traffic lights — where native
hit-test always wins and the button couldn't be clicked. The modal
also swallowed the window's drag region.
Introduce a desktop IPC channel window:setImmersive that calls
BrowserWindow.setWindowButtonVisibility, exposed through the existing
desktopAPI preload bridge. A small useImmersiveMode() hook in
@multica/views/platform toggles it for the component's lifetime and
is a no-op on web / non-macOS.
CreateWorkspaceModal now:
- calls useImmersiveMode() so traffic lights disappear while it's open
- adds a transparent top h-10 drag strip to restore window dragging
- moves the Back button from top-6 left-6 to top-12 left-12 with an
explicit no-drag region so clicks always reach it
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Extract the main-area top bar into a MainTopBar component so it can
read sidebar state via useSidebar(). When the sidebar is collapsed,
apply pl-20 (80px) to the drag header so the TabBar starts clear of
the macOS traffic-light hit-test region (~x=16..68) that always
wins over HTML clicks.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
bundle-cli.mjs now invokes `go build` with the same ldflags as
`make build` (version/commit/date) before copying the binary into
resources/bin/. Running this on every `pnpm dev:desktop`, `dev:remote`
and `package` guarantees the bundled CLI matches the current Go source,
so you can't accidentally ship a stale binary after editing server/
code. Go's build cache makes no-op builds ~a few hundred ms.
Graceful fallback preserved: if `go` is not on PATH (frontend-only
contributor), we warn, skip the build, and let cli-bootstrap download
the latest release at runtime. Compile errors remain fatal so broken
Go code blocks dev rather than silently falling back.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(desktop): add daemon management panel with sidebar status bar
Integrate multica daemon lifecycle management into the desktop app so
users can start/stop/restart the daemon and view live logs without
leaving the UI. Session tokens are automatically synced to the CLI
config file, making daemon authentication transparent.
- daemon-manager.ts: Electron main process module for daemon lifecycle
(health polling, start/stop via CLI, token sync, log tail)
- Preload bridge: new daemonAPI with IPC for all daemon operations
- Sidebar bottomSlot: persistent daemon status indicator in sidebar
footer (desktop-only, injected via AppSidebar slot)
- Daemon panel Sheet: right-side drawer with status details, controls,
and real-time log viewer with auto-scroll and level coloring
- Token sync: on login and app startup, JWT is written to
~/.multica/config.json so daemon can authenticate seamlessly
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(desktop): add P1+P2 daemon features — runtimes card, auto-start, settings
P1: Runtimes page Local Daemon card
- Add topSlot prop to shared RuntimesPage for platform injection
- DaemonRuntimeCard shows status, agents, uptime with Start/Stop/
Restart/Logs buttons (desktop-only, injected via slot)
P2: Auto-start and auto-stop
- Daemon auto-starts on app launch when user is authenticated
(controlled by autoStart preference, default: true)
- Daemon auto-stops on app quit (controlled by autoStop preference,
default: false — daemon keeps running in background by default)
- Preferences persisted to ~/.multica/desktop_prefs.json
P2: Daemon settings tab
- New "Daemon" tab in Settings > My Account section (desktop-only)
- Toggle auto-start and auto-stop behavior
- CLI installation status check with link to install guide
- SettingsPage gains extraAccountTabs prop for platform injection
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): address PR review feedback on daemon management
Must-fix:
- before-quit handler now calls event.preventDefault(), awaits
stopDaemon(), then re-calls app.quit() so the daemon actually
stops before the app exits
- Add concurrency guard (operationInProgress lock) in daemon-manager
to reject overlapping start/stop/restart IPC calls
- Extract shared types (DaemonState, DaemonStatus, DaemonPrefs),
constants (STATE_COLORS, STATE_LABELS), and formatUptime to
apps/desktop/src/shared/daemon-types.ts — all renderer components
now import from this single source
Should-fix:
- Log viewer uses monotonic counter (LogEntry.id) instead of array
index as React key, preventing full re-renders on overflow
- All start/stop/restart handlers now show toast.error() with the
error message when the operation fails
- startLogTail retries up to 5 times with 2s delay when the log
file doesn't exist yet (handles first-run case)
Minor:
- Cache findCliBinary() result after first successful lookup
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(logger): suppress ANSI color codes when stderr is not a TTY
Detect whether stderr is connected to a terminal and set tint's NoColor
option accordingly. Previously daemon.log files contained raw escape
sequences like \033[2m and \033[92m which made them unreadable in the
Desktop log viewer and any non-TTY sink (docker logs, systemd, etc).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(daemon): runtime watch/unwatch HTTP endpoints and denylist
Add GET/POST/DELETE /watch handlers on the daemon's health port so
clients (notably Desktop) can add or remove watched workspaces at
runtime without restarting the daemon or editing config.json. Each
handler updates in-memory state under d.mu and persists back to
~/.multica/profiles/<name>/config.json for survival across restarts.
- CLIConfig gains UnwatchedWorkspaces as an explicit opt-out denylist.
syncWorkspacesFromAPI skips entries in the denylist so a manual
unwatch isn't silently revived 30s later by the periodic sync.
- loadWatchedWorkspaces tolerates an empty config and returns nil
instead of erroring out, because Desktop starts daemons with a
fresh profile and relies on the sync loop / watch endpoint to
populate the list.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(desktop): bundled CLI, per-backend profile, and watch UI
Make the Desktop app self-sufficient: it bundles its own multica
binary, manages its own daemon profile keyed by the backend URL, and
authenticates that daemon with a long-lived PAT it mints on first
login. The daemon panel gains a checkbox list of watched workspaces
and surfaces the active profile + server URL.
CLI bootstrap
- scripts/bundle-cli.mjs copies server/bin/multica into
apps/desktop/resources/bin/ before electron-vite dev and
electron-builder package. asarUnpack: resources/** already covers
this path, so the binary ships with the .app in prod.
- main/cli-bootstrap.ts adds an ensureManagedCli() fallback that
downloads the latest release from GitHub when no bundled binary
exists (first launch on a machine without developer tooling).
- daemon-manager.resolveCliBinary prefers bundled > managed > download
> PATH, so local iteration uses the freshly built binary.
Daemon profile
- resolveActiveProfile now derives a desktop-<host> profile name from
the target API URL and creates its config.json on demand. Never
reads or writes the user's hand-configured CLI profiles, avoiding
the "Desktop polluted my default profile" class of bug.
- syncToken detects a JWT input and exchanges it for a PAT via
POST /api/tokens; caches the resulting mul_* token in the profile
config so subsequent launches skip the round-trip.
- startDaemon / stopDaemon / log tail all operate on the resolved
profile; renderer sets the target URL via a new
daemon:set-target-api-url IPC.
Workspace watching
- daemon-manager exposes daemon:list-watched / daemon:watch-workspace /
daemon:unwatch-workspace IPCs backed by the daemon's new /watch
endpoints.
- App.tsx reconciles the user's workspace list against the daemon's
watched set whenever TanStack Query updates it — new workspaces are
registered instantly instead of waiting for the daemon's 30s sync,
and removed workspaces are unwatched.
- daemon-panel gains a "Watched Workspaces" section with per-workspace
checkboxes that call watch/unwatch directly. Opt-outs persist in the
profile's unwatched_workspaces denylist.
Lifecycle states + UI
- DaemonStatus gains `profile`, `serverUrl`, and an `installing_cli`
state. Panel shows Profile / Server info rows and a "Setting up…"
blurb during first-run CLI download; failure surfaces a Retry button.
- Status bar renders a spinner during installation and hides the Start
button until setup finishes.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): register /onboarding route
The create-workspace modal navigates to /onboarding on success, but
the Desktop router only had flat routes (issues, projects, runtimes,
etc.) — resulting in an "Unexpected Application Error! 404 Not Found"
page after creating a new workspace.
Mirror the web app's wiring: render OnboardingWizard with onComplete
pushing to /issues, via the shared navigation adapter.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor(desktop): remove sidebar daemon status bar
Drop the bottom-left daemon indicator in favor of the DaemonRuntimeCard
at the top of the Runtimes page, which already shows the same info
plus full Start/Stop/Restart controls and the Logs entry point. A
single canonical place avoids fragmenting daemon status across the UI.
Also remove the now-unused `bottomSlot` prop from AppSidebar — Desktop
was the only consumer, Web never needed it, so keeping it would be
dead scaffolding.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): daemon panel layout and close button
- Logs section now fills the remaining vertical space down to the
sheet bottom instead of being capped at h-64, which left a huge
empty area below it. Top section (status, actions, watched list)
keeps natural height as shrink-0; the watched list gets its own
max-h-48 scroll so a long list can't push Logs off screen.
- Replace the Sheet's built-in close button with an explicit
<button> wired directly to onOpenChange(false). The Base UI
Dialog.Close wrapped in Button via the render prop wasn't firing
on click in this panel; going straight through the controlled
state guarantees it responds.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): make daemon panel clickable inside Electron drag region
The sheet opens at the top of the window, which visually overlaps the
TabBar's -webkit-app-region: drag zone. Even though the sheet portals
to document.body, Chromium computes drag regions over the final
composited pixels, so the sheet inherited "drag" and swallowed the
mouseup of every click (mousedown fired but click never resolved) —
including the X close button.
Mark the entire SheetContent popup with -webkit-app-region: no-drag
to subtract it from the drag region. This also fixes future buttons /
checkboxes inside the sheet that would have hit the same issue.
While here, move the close button into the SheetHeader as a flex
sibling of SheetTitle instead of an absolutely positioned overlay —
simpler layout and avoids any stacking-context weirdness.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(desktop): clickable daemon runtime card row
The whole Local Daemon row now opens the sheet panel — icon, title,
and status line are all part of one click target. This replaces the
standalone "Logs" button, which was redundant now that clicking
anywhere on the row does the same thing.
The right-side action cluster (Start / Stop / Restart) wraps its
onClick in stopPropagation so pressing those buttons doesn't bubble
up and open the panel.
Keyboard access: Enter / Space on the focused row opens the panel,
with a focus-visible background for feedback.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(runtimes): mark Desktop-launched daemons as managed
When the Multica Desktop app spawns the CLI it ships with, the
resulting daemon shares its binary with the Electron bundle — Desktop
is responsible for updating that binary on every release. Letting the
daemon self-update would just get clobbered on the next Desktop launch
and could brick the embedded binary mid-update.
Propagate a "launched_by" signal end-to-end so the UI can hide the
CLI self-update affordance (and the daemon refuses updates as a second
line of defense):
- Desktop's startDaemon spawns execFile with env MULTICA_LAUNCHED_BY=desktop.
- daemon.Config gains LaunchedBy; cmd_daemon reads the env var on boot.
- registerRuntimesForWorkspace includes launched_by in the request body.
- Server DaemonRegister folds launched_by into runtime.metadata (JSONB
— no migration needed).
- handleUpdate returns a "failed" status with an explanatory message
when LaunchedBy == "desktop", so even a bypass API call can't trigger
the self-update path.
- RuntimeDetail extracts metadata.launched_by and passes it to
UpdateSection, which swaps the Latest / → available / Update button
cluster for a muted "Managed by Desktop" label.
CLI-only users (brew install, direct tarball) keep the exact same
behavior — the env var is empty, the UI shows the update button,
the daemon still self-updates on request.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): harden daemon manager from PR review
- syncToken now takes userId and mints a fresh PAT on user switch,
restarting a running daemon so it picks up the new credentials.
A .desktop-user-id sidecar in each profile records the owner so a
previous user's cached PAT can't be reused on the next login.
- App.tsx wires onLogout on CoreProvider to daemonAPI.clearToken()
and daemonAPI.stop() so the cached PAT and live daemon don't
outlive the session.
- startLogTail replaced with a cross-platform watchFile
implementation (initial 32 KB window + poll for new bytes,
handles truncation). spawn("tail") was broken on Windows.
- writeProfileConfig now serializes through a promise chain to
prevent concurrent writes from corrupting config.json.
- startDaemon keeps the "starting" state until pollOnce confirms
/health, avoiding a running → stopped flash when the Go daemon
isn't yet listening after the supervisor returns.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix(desktop): verify downloaded CLI against checksums.txt
Download goreleaser's checksums.txt alongside the release archive,
parse the sha256 lookup, stream the archive through createHash, and
refuse to install on mismatch or missing entry. Closes the supply-
chain gap where auto-install would execute an unverified binary on
first launch.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* chore(desktop): lint and style cleanups from PR review
- eslint.config.mjs: add scripts/**/*.{mjs,js} override with
globals.node so bundle-cli.mjs lints clean (was erroring on
undefined process/console).
- daemon-panel.tsx: log level classes now use semantic tokens
(text-info, text-warning, text-destructive) instead of hardcoded
Tailwind colors; escape the apostrophe in the retry copy.
- daemon-settings-tab.tsx: import DaemonPrefs from shared/daemon-
types instead of redefining it.
- runtimes-page.tsx: fix indentation inside the new topSlot wrapper.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Devv <devv@Devvs-Mac-mini.local>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Co-authored-by: yushen <ldnvnbl@gmail.com>
Switching to a session whose messages aren't cached showed the empty
state (starter prompts) for the ~300ms the fetch took — jarring, because
you're clicking into an existing conversation, not starting a new one.
Now there's a three-branch render: skeleton while loading, empty state
for real new-chat (activeSessionId === null), messages when ready.
Cached switches still return data synchronously — no flash.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Wrap ChatMessageList and ChatInput in mx-auto max-w-4xl px-5 so wide
chat windows don't sprawl — matches the issue-detail / project-detail
width convention
- draftKey now includes the selected agent id in the new-chat state.
Tiptap's Placeholder only applies at mount, so key-driven remount is
the simplest way to refresh it when the user switches agents before
sending the first message. Side benefit: per-agent new-chat drafts.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* docs: add Trendshift GitHub Trending badge to READMEs
Add dynamic GitHub Trending badge from Trendshift.io (repo ID 24695)
to both English and Chinese READMEs, placed below existing CI/stars
badges.
* docs: replace Trendshift badge with Star History chart
Remove the Trendshift trending badge and add a Star History chart
section at the end of both English and Chinese READMEs. The chart
supports dark/light mode and links to the interactive star-history page.
* fix(docs): use light theme for Star History chart in both color schemes
Remove &theme=dark from the dark mode source so the chart always
renders with a light background regardless of GitHub's color scheme.
* docs: add Trendshift GitHub Trending badge to READMEs
Add dynamic GitHub Trending badge from Trendshift.io (repo ID 24695)
to both English and Chinese READMEs, placed below existing CI/stars
badges.
* docs: replace Trendshift badge with Star History chart
Remove the Trendshift trending badge and add a Star History chart
section at the end of both English and Chinese READMEs. The chart
supports dark/light mode and links to the interactive star-history page.
Recent issues store was duplicating server data (title, status, identifier)
in Zustand, violating the single-source-of-truth architecture. Now the store
only tracks visit records (id + visitedAt), and the search command joins
fresh data from the TanStack Query issue list cache at render time.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
State management
- Pending task / live timeline are now Query-cache single source;
Zustand mirror removed (fixes duplicate assistant render caused by
the invalidate→refetch race window)
- WS subscriptions moved from ChatWindow to global useRealtimeSync so
pending state survives minimize and refresh
- New GET /chat/sessions/:id/pending-task to recover live state on mount
- Drafts persisted per-session (was per-workspace)
Unread tracking
- Migration 040: chat_session.unread_since (event-driven; old chats
stay clean — no mass backfill)
- POST /chat/sessions/:id/read clears unread; broadcasts
chat:session_read so other devices sync
- New GET /chat/pending-tasks aggregate for the FAB
- ChatFab: brand-color impulse animation while running, brand-dot
badge of unread session count
- ChatWindow auto-marks read when user is viewing the session
Header redesign
- Two independent dropdowns: agent (avatar + name + My/Others
grouping) at the input bottom-left; session (title + agent avatar)
in the header
- ⊕ new-chat button replaces the old + and history buttons
- Session dropdown lists all sessions across agents with avatars
- Empty state: 3 clickable starter prompts that send immediately
- Mention link renderer falls through to default span on null —
fixes @member/@agent/@all silently disappearing app-wide
- User messages render through Markdown
- Enter submits in chat input only (with IME guard + codeBlock skip);
bubble menu hidden in chat
Misc
- Partial index on agent_task_queue for fast pending-task lookup
- 2 new storage keys added to clearWorkspaceStorage
- useMarkChatSessionRead has onError rollback
- chat.* namespace logs across store, mutations, components, realtime
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When a member replies in a member-started thread without @mentioning the
assigned agent, the on_comment trigger was suppressed — even if the agent
had already replied in that thread. This meant the common flow of
"member posts → agent replies → member follows up" would not re-trigger
the agent on the follow-up.
Add HasAgentRepliedInThread SQL query and check it in isReplyToMemberThread
so that agent participation in a thread is treated as an ongoing conversation.
When `multica login` runs against production (multica.ai), the CLI was
using the app URL hostname as the callback host, producing a callback
URL like `http://multica.ai:PORT/callback`. This URL fails frontend
validation (which only allows localhost and private IPs) and can't
actually reach the CLI's local HTTP server.
Now only private IPs (RFC 1918) are used as the callback host, which
matches the intended self-hosted LAN scenario. Public hostnames
correctly fall back to localhost.
Fixes#974
Add finalFocus={false} to DialogContent in create-issue and create-workspace
modals so Base UI does not attempt focus restoration on close. These modals
are always opened programmatically via useModalStore (no trigger element),
so there is no meaningful element to return focus to.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: clarify that local skills work automatically, workspace skills are for team sharing
Users were confused, thinking they needed to re-upload locally installed skills
(e.g. .claude/skills/) to Multica before agents could use them. Updated UI text
across the skills page, agent skills tab, onboarding, and docs to clearly
distinguish between local skills (auto-discovered) and workspace skills (for
team-wide sharing).
Closes#972
* feat(views): replace inline text with info banner for local skills hint
The "local runtime skills are always available" message was buried in
the description text and easy to miss. Move it into a visible info
callout banner with an icon so users notice it immediately.
Replace the original checklist + manual testing section with a
unified checklist modeled after the Paperclip open-source project:
thinking path, model disclosure, local tests, test coverage,
UI screenshots, documentation, risk assessment, and reviewer comments.
The merge from main introduced `editor?.state.selection.empty` in
ContentEditor. The test mock was missing `state.selection`, causing
a TypeError.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Base UI's DropdownMenu uses FloatingFocusManager which steals focus from
the editor (initialFocus + closeOnFocusOut), causing the BubbleMenu to
hide before dropdown item clicks can register. Popover supports
initialFocus={false} and finalFocus={false}, keeping editor focus intact
throughout the interaction.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds a new "Manual Testing / Acceptance" section to the PR template
with checklist items for verifying changes in a real environment:
happy path, edge cases, visual regressions, cross-platform testing,
API consumer compatibility, and log inspection.
Move the Environment Variables section from the Settings tab into its
own "Environment" tab (KeyRound icon) between Tasks and Settings. Each
tab now has independent save state.
EditorLinkPreview's useRef initializer accessed editor.view?.dom which
throws when the editor view is not yet mounted (Tiptap uses a Proxy
that rejects property access before mount). Defer the contextElement
assignment to the selectionUpdate callback where the view is guaranteed
to exist.
